C mode class

Clustered Ontap Class

Hector Martinez, 8 years consulting

David Brown, Michico

Josh Sanders, Atlanta IBM

Scott Anctil, EDT,

Suresh Pachiyappan,

Day 5

Stats show Core dump Set diag Set admin Stats Sysstat –x 1 System node run –node <node name> Reallocate measure | start | status

Mroot is now available…

the diffrence between N-blade vs D-blade

What could be the maxim rsize/wsize? To get a file on the B.P. from Hector late

CP: Consistency Points, types of

B: Back-to-Back CPs, bad perf issue

T: timer

: Rubel Khan [email protected]

Dir of OP

Share the soft copy of the book

mailto:[email protected]

Only A-sync in C-mode?

8.1.2 to support SMB 3.0

Migrate vFiler beta tool ask Chad

HW Universe app

DNS Load balancing

https://docs.google.com/file/d/0Bx9t1-yJwAlMczZxR2lXN2RWRFE/edit?usp=sharing

login: admin

(cluster setup)

Welcome to the cluster setup wizard.

You can enter the following commands at any time:

"help" or "?" - if you want to have a question clarified,

"back" - if you want to change previously answered questions, and

"exit" or "quit" - if you want to quit the cluster setup wizard.

Any changes you made before quitting will be saved.

You can return to cluster setup at any time by typing "cluster setup".

To accept a default or omit a question, do not enter a value.

https://docs.google.com/file/d/0Bx9t1-yJwAlMczZxR2lXN2RWRFE/edit?usp=sharing

Do you want to create a new cluster or join an existing cluster? {create, join}:

create

System Defaults:

Private cluster network ports [e0a,e0b].

Cluster port MTU values will be set to 1500.

Cluster interface IP addresses will be automatically generated.

Do you want to use these defaults? {yes, no} [yes]:

It can take several minutes to create cluster interfaces...

Step 1 of 5: Create a Cluster

You can type "back", "exit", or "help" at any question.

Enter the cluster name: netappu

Enter the cluster base license key: VMZIVZGKWVMADF

Creating cluster netappu

Starting cluster support services .....

Cluster netappu has been created.

Step 2 of 5: Add Feature License Keys


Enter an additional license key []: BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF Z0FNAAHKWVMADF NUHYZZGKWVMADF DL0FYZGKWVMADF

BAKJZZGKWVMADF RQQQXZGKWVMADF Z0FNAAHKWVMADF Z0FNAAHKWVMADF NUHYZZGKWVMADF

DL0FYZGKWVMADF is not a valid license key.

User-specified feature license keys for the cluster. Examples of licensed

cluster features are storage network protocols such as CIFS, NFS, and iSCSI.

Obtain keys from your sales or support representative. Enter feature license

keys one at a time. When you finish entering feature license keys press Enter

to continue to the next section.


Enter an additional license key []: BAKJZZGKWVMADF

NFS License was added.

Enter an additional license key []: RQQQXZGKWVMADF

CIFS License was added.

Enter an additional license key []: Z0FNAAHKWVMADF

Z0FNAAHKWVMADF is not a valid license key.







Enter an additional license key []: ZOFNAAHKWVMADF

iSCSI License was added.

Enter an additional license key []: Z0FNAAHKWVMADF

Z0FNAAHKWVMADF is not a valid license key.







Enter an additional license key []: ZOFNAAHKWVMADF

iSCSI License was added.

Enter an additional license key []: NUHYZZGKWVMADF

SnapMirror Data Protection License was added.

Enter an additional license key []: DL0FYZGKWVMADF

DL0FYZGKWVMADF is not a valid license key.







Enter an additional license key []: DLOFYZGKWVMADF

SnapRestore License was added.

Enter an additional license key []:

Step 3 of 5: Set Up a Vserver for Cluster Administration


Enter the cluster administrator's (username "admin") password:

Retype the password:

Enter the cluster management interface port [e0c]: e0c

Enter the cluster management interface IP address: 192.168.66.120

Enter the cluster management interface netmask: 255.255.255.0

Enter the cluster management interface default gateway: 192.168.66.2

A cluster management interface on port e0c with IP address 192.168.66.120 has been created. You can use this address to connect to and manage the cluster.

Enter the DNS domain names: netappu.com

Enter the name server IP addresses: 192.168.66.1

DNS lookup for the admin Vserver will use the netappu.com domain.

Step 4 of 5: Configure Storage Failover (SFO)


SFO is licensed.

SFO will be enabled when the partner joins the cluster.

Step 5 of 5: Set Up the Node


Where is the controller located []: NetAppU

Enter the node management interface port [e0f]: e0f

Enter the node management interface IP address: 192.168.66.121

Enter the node management interface netmask: 255.255.255.0

Enter the node management interface default gateway: 192.168.66.2

A node management interface on port e0f with IP address 192.168.66.121 has been created.

Cluster setup is now complete. To begin storing and serving data on this

cluster, you must complete the following additional tasks if they have

not already been completed:

1) Join additional nodes to the cluster by running "cluster setup" on

those nodes.

2) If in a HA configuration, verify that storage failover is enabled by

running the "storage failover show" command.

3) Create a Vserver by running the "vserver setup" command.

You can access your cluster to complete these tasks by:

1) Using the NetApp System Manager to manage cluster netappu at 192.168.66.120.

NetApp System Manager must be at version 2.0 or above.

You can download NetApp System Manager from

http://support.netapp.com

2) Logging in to the cluster by using SSH (secure shell) from your work station:

ssh [email protected]

Exiting the cluster setup wizard.

login: login: admin

Password:

Login incorrect

login: admin

Password:

Login incorrect

login: admin

Password: netappu1

netappu::> cluster show

Node Health Eligibility

--------------------- ------- ------------

netappu-01 true true

netappu::>

…..

PuTTY to node2

login: admin

(cluster setup)










join

System Defaults:






Step 1 of 3: Join an Existing Cluster


Enter the name of the cluster you would like to join [netappu]:

Joining cluster netappu

Starting cluster support services ....

This node has joined the cluster netappu.



SFO is licensed.




Enter the node management interface port [e0f]: e0f


Enter the node management interface netmask [255.255.255.0]:

Enter the node management interface default gateway [192.168.66.2]:






those nodes.





1) Using the NetApp System Manager to manage cluster netappu at 192.168.66.120.







login: admin

Password:

netappu::> cluster show

Node Health Eligibility

--------------------- ------- ------------



2 entries were displayed.

netappu::> network interface show

Logical Status Network Current Current Is

Vserver Interface Admin/Oper Address/Mask Node Port Home

----------- ---------- ---------- ------------------ ------------- ------- ----

netappu

cluster_mgmt up/up 192.168.66.120/24 netappu-01 e0c true

netappu-01

clus1 up/up 169.254.144.226/16 netappu-01 e0a true

clus2 up/up 169.254.124.226/16 netappu-01 e0b true

mgmt1 up/up 192.168.66.121/24 netappu-01 e0f true

netappu-02





netappu::>

[email protected] or [email protected]

login: admin

Password:

netappu::> ?



up Go up one directory

antivirus> Manage antivirus

cluster> Manage clusters

dashboard> Display dashboards

event> Manage system events

exit Quit the CLI session

history Show the history of commands for this CLI session

job> Manage jobs and job schedules

lun> List LUN (logical unit of block storage) commands

man Display the on-line manual pages

network> Manage physical and virtual network connections

redo Execute a previous command

rows Show/Set the rows for this CLI session

run Run interactive or non-interactive commands in

the node shell

security> The security directory

set Display/Set CLI session settings

sis Manage volume efficiency

snapmirror> Manage SnapMirror

statistics> Display operational statistics

storage> Manage physical storage, including disks,

aggregates, and failover

system> The system directory

top Go to the top-level directory

volume> Manage virtual storage, including volumes,

snapshots, and mirrors

vserver> Manage Vservers

netappu::>

netappu::> storage ?

aggregate> Manage storage aggregates

array> The array directory

disk> Manage physical disks

errors> The errors directory

failover> Manage storage failover

load> The load directory

path> The path directory

raid-options> The raid-options directory

netappu::storage> cluster

netappu::cluster> ?

contact-info> Manage contact information for the cluster.

create Create a cluster

ha> Manage high-availability configuration

identity> Manage the cluster's attributes, including name

and serial number

join Join an existing cluster using the specified

member's IP address

modify Modify cluster node membership attributes

peer> Manage cluster peer relationships

setup Setup wizard

show Display cluster node members

statistics> Display cluster statistics

netappu::cluster statistics> ?

show Display cluster-wide statistics

netappu::cluster> man cluster

cluster Data ONTAP 8.1 cluster

NAME

cluster -- Manage clusters

DESCRIPTION

The cluster commands enable you to create and manage Data ONTAP 8 Cluster-

Mode clusters.

SUBDIRECTORIES

contact-info> - Manage contact information for the cluster.

ha> - Manage high-availability configuration

identity> - Manage the cluster's attributes, including name and serial

number

peer> - Manage cluster peer relationships

statistics> - Display cluster statistics

COMMANDS

create - Create a cluster

join - Join an existing cluster using the specified member's IP address

modify - Modify cluster node membership attributes

setup - Setup wizard

show - Display cluster node members

Data ONTAP 8.1 -o- Data ONTAP 8.1

~

~netappu::cluster> man cluster modify

cluster modify Data ONTAP 8.1 cluster modify

NAME

cluster modify -- Modify cluster node membership attributes

AVAILABILITY

This command is available to cluster administrators at the admin privilege

level.

DESCRIPTION

The cluster modify command modifies the cluster attributes of a node,

including its eligibility to participate in the cluster.

At the advanced privilege level, you can use the command to specify

whether a node holds epsilon. Epsilon is an extra fractional vote that

enables quorum to form using slightly weaker requirements. For example,

two out of four eligible nodes are sufficient to form quorum if one of

those two nodes holds epsilon.

PARAMETERS

-node {<nodename>|local} - Node

Use this parameter to specify the name of the node to modify. If you

do not specify a node, the command runs on the local node.

[-eligibility {true|false}] - Eligibility

Use this parameter with the value true to specify that the node is

eligible to participate in the cluster. Use this parameter with the

value false to specify that the node is not eligible to participate in

the cluster.

If you modify a node as ineligible to participate in the cluster, the

command prompts you for confirmation before it runs.

EXAMPLES

This example modifies a node to make it eligible to participate in the

cluster.

cluster1::> cluster modify -node node3 -eligibility true

Data ONTAP 8.1 -o- Data ONTAP 8.1

Q

netappu::cluster> storage aggr

netappu::storage aggregate> modify ?

[-aggregate] <aggregate name> Aggregate

[ -raidtype|-t {raid_dp|raid4} ] RAID Type

[ -maxraidsize|-s <integer> ] Max RAID Size

[ -snapshot-autodelete {on|off} ] Automatic Snapshot Deletion

[ -ha-policy {sfo|cfo} ] HA Policy

[ -free-space-realloc {on|off|no_redirect} ]

Free Space Reallocation

[ -percent-snapshot-space <percent> ] Space Reserved for Snapshot Copies

[ -hybrid-enabled {true|false} ] Hybrid Enabled

[ -force-hybrid-enabled|-f [true] ] Force Marking of Aggregate as Hybrid

Enabled

netappu::storage aggregate> modify

netappu::storage aggregate> scrub ?


[ -raidgroup <text> ] RAID Group

[-action] {start|stop|resume|suspend|status}

Action

netappu::storage aggregate> modify -state ?

offline

online

restricted

netappu::storage aggregate> volume ?

autosize Set/Display the autosize settings of the

flexible volume.

clone> Manage FlexClones

copy> Manage volume copy operations

create Create a new volume

delete Delete an existing volume

destroy Destroy an existing volume

efficiency> Manage volume efficiency

file> File related commands

member> Manage constituent volumes of striped volumes

modify Modify volume attributes

mount Mount a volume on another volume with a

junction-path

move> Manage volume move operations

offline Take an existing volume offline

online Bring an existing volume online

qtree> Manage qtrees

quota> Manage Quotas, Policies, Rules and Reports

rename Rename an existing volume

restrict Restrict an existing volume

show Display a list of volumes

size Set/Display the size of flexible volume.

snapshot> Manage snapshots

unmount Unmount a volume

netappu::storage aggregate> volume

netappu::storage aggregate> set -privilege advanced

Warning: These advanced commands are potentially dangerous; use them only when

directed to do so by NetApp personnel.

Do you want to continue? {y|n}: y

netappu::storage aggregate*> volume ?

add-members *Add members to an existing striped volume

autosize Set/Display the autosize settings of the

flexible volume.

clone> Manage FlexClones

copy> Manage volume copy operations

create Create a new volume

delete Delete an existing volume

destroy Destroy an existing volume

efficiency> Manage volume efficiency

file> File related commands

make-vsroot *Designate a non-root volume as a root volume of

the Vserver

member> Manage constituent volumes of striped volumes

modify Modify volume attributes

mount Mount a volume on another volume with a

junction-path

move> Manage volume move operations

offline Take an existing volume offline

online Bring an existing volume online

qtree> Manage qtrees

quota> Manage Quotas, Policies, Rules and Reports

rename Rename an existing volume

restrict Restrict an existing volume

show Display a list of volumes

size Set/Display the size of flexible volume.

snapshot> Manage snapshots

unmount Unmount a volume

netappu::storage aggregate*> volume

netappu::storage aggregate*> set admin

netappu::storage aggregate>

netappu::storage aggregate> network interface show



----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02





netappu::storage aggregate> net int sho

Error: Ambiguous command. Possible matches include:

network interface show

network interface show-routing-group

network interface show-zones

netappu::storage aggregate> ne in show

(network interface show)



----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02





netappu::storage aggregate>

Day 2

NOW Site searching for System Configration guide/diagram

Only change disk ownership on spare

85% customer disable auto giveback

from Henry PAN to Everyone:

GM Class:>)

from Hector Martinez to Everyone:

Good morning Henry!


What's the advantage of DS4486? Thanks


Cool, when will you share the e-book with us? Thanks


:>) Thanks


Cool:>) Can't wait to get all your files!


How much performance hit could be? Thanks


Thanks


What's the diffrence compare with FAST VP from EMC? Thanks


OK. Thanks


Thanks

from Scott Anctil to Everyone:

For Flash Pool is RAID DP still recomeded or RAID 4?

http://support.netapp.com/matrix

login: admin

Password:

netappu::> stor disk show

(storage disk show)

Usable Container

Disk Size Shelf Bay Type Position Aggregate Owner

---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-01:v4.16 - - - unassigned present - -









http://support.netapp.com/matrix






netappu-01:v5.16 1020MB - - aggregate dparity aggr0 netappu-01

netappu-01:v5.17 1020MB - - aggregate parity aggr0 netappu-01

netappu-01:v5.18 1020MB - - aggregate data aggr0 netappu-01

Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-01:v5.19 1020MB - - spare present - netappu-01










Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------
















netappu-02:v5.16 1020MB - - aggregate dparity aggr0_netappu_02_0

netappu-02

Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-02:v5.17 1020MB - - aggregate parity aggr0_netappu_02_0

netappu-02

netappu-02:v5.18 1020MB - - aggregate data aggr0_netappu_02_0

netappu-02








Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------
















Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------



















netappu::>

netappu::> disk assign -disk netappu-01 v4* -owner netappu-01

Error: 'v4*' was not expected. Please specify -fieldname first.

netappu::> disk assign -disk netappu-02 v4* -owner netappu-02

Error: 'v4*' was not expected. Please specify -fieldname first.

netappu::> stor aggr show

(storage aggregate show)

Aggregate Size Available Used% State #Vols Nodes RAID Status

--------- -------- --------- ----- ------- ------ ---------------- ------------

aggr0 900MB 20.12MB 98% online 1 netappu-01 raid_dp,

normal

aggr0_netappu_02_0

900MB 20.47MB 98% online 1 netappu-02 raid_dp,

normal


netappu::>

netappu::> volume show

Vserver Volume Aggregate State Type Size Available Used%

--------- ------------ ------------ ---------- ---- ---------- ---------- -----

netappu-01

vol0 aggr0 online RW 851.5MB 629.2MB 26%

netappu-02

vol0 aggr0_netappu_02_0

online RW 851.5MB 618.9MB 27%


netappu::> stor aggr create ?

(storage aggregate create)


{ [ -nodes <nodename>, ... ] Nodes

[-diskcount] <integer> Number Of Disks

[ -chksumstyle <checksum style> ] Checksum Style

[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS | SATA | SSD} ]

Disk Type

[ -disksize <integer> ] Disk Size(GB)

[ -diskrpm|-R <integer> ] Disk RPM

| [-disklist|-d] <disk path name>, ... } Disks

[ -allow-same-carrier [true] ] Allow Same RAID Group Within

Carrier



[ -simulate [true] ] Simulate Aggregate creation

[ -volume-style {flex|striped} ] Volume Style

[ -allow-mixed|-f [true] ] Allow Disks With Different RPMs

[ -block-type|-B {32-bit|64-bit} ] Block Type

netappu::> stor aggr create

netappu::> stor aggr create -aggr n01_aggr1 -node netappu-01 -diskcount 3


[Job 19] Job succeeded: DONE

netappu::>




--------- -------- --------- ----- ------- ------ ---------------- ------------


normal

aggr0_netappu_02_0


normal

n01_aggr1 900MB 899.9MB 0% online 0 netappu-01 raid_dp,

normal


netappu::> stor aggr show -aggr n01_aggr1


Aggregate: n01_aggr1

Size: 900MB

Used Size: 116KB

Used Percentage: 0%

Available Size: 899.9MB

State: online

Nodes: netappu-01

Number Of Disks: 3

Checksum Style: block

Disks: netappu-01:v5.19,

netappu-01:v5.20,

netappu-01:v5.21

Number Of Volumes: 0

Plexes: /n01_aggr1/plex0(online)

RAID Groups: /n01_aggr1/plex0/rg0 (block)

RAID Type: raid_dp

Max RAID Size: 16

RAID Status: raid_dp, normal

Checksum Enabled: true

Checksum Status: active

Inconsistent: false

Hybrid: false

Total Hybrid Cache Size: 0B

Automatic Snapshot Deletion: on

HA Policy: sfo

Free Space Reallocation: off

Space Reserved for Snapshot Copies: 0%

Hybrid Enabled: false

Volume Style: flex

Has Mroot Volume: false

Has Partner Node Mroot Volume: false

Is Root: false

Block Type: 64-bit

Space Used By metadata for Volume Efficiency: 0B

netappu::>

netappu::> aggr show -aggr n01_aggr1 -instance


Size: 2.64GB

Used Size: 148KB

Used Percentage: 0%

Available Size: 2.64GB

State: online

Nodes: netappu-01

Number Of Disks: 5



netappu-01:v5.20,

netappu-01:v5.21,

netappu-01:v5.22,

netappu-01:v5.24




RAID Type: raid_dp

Max RAID Size: 16




Inconsistent: false

Hybrid: false



HA Policy: sfo




Volume Style: flex



Is Root: false

Block Type: 64-bit


netappu::>

netappu::> stor aggr create ?



{ [ -nodes <nodename>, ... ] Nodes

[-diskcount] <integer> Number Of Disks

[ -chksumstyle <checksum style> ] Checksum Style

[ -disktype|-T {ATA | BSAS | FCAL | FSAS | LUN | MSATA | SAS | SATA | SSD} ]

Disk Type

[ -disksize <integer> ] Disk Size(GB)

[ -diskrpm|-R <integer> ] Disk RPM

| [-disklist|-d] <disk path name>, ... } Disks

[ -allow-same-carrier [true] ] Allow Same RAID Group Within

Carrier



[ -simulate [true] ] Simulate Aggregate creation

[ -volume-style {flex|striped} ] Volume Style

[ -allow-mixed|-f [true] ] Allow Disks With Different RPMs

[ -block-type|-B {32-bit|64-bit} ] Block Type

netappu::> stor aggr create -aggr n02_fp1 -node netappu-02 -diskcount 10



netappu::>

netappu::> stor aggr show -aggr n02_fp1


Aggregate: n02_fp1

Size: 7.03GB

Used Size: 180KB

Used Percentage: 0%


State: online

Nodes: netappu-02

Number Of Disks: 10



netappu-02:v5.20,

netappu-02:v5.21,

netappu-02:v5.22,

netappu-02:v5.24,

netappu-02:v5.25,

netappu-02:v5.26,

netappu-02:v5.27,

netappu-02:v5.28,

netappu-02:v5.29


Plexes: /n02_fp1/plex0(online)

RAID Groups: /n02_fp1/plex0/rg0 (block)

RAID Type: raid_dp

Max RAID Size: 16




Inconsistent: false

Hybrid: false



HA Policy: sfo




Volume Style: flex



Is Root: false

Block Type: 64-bit


netappu::> stor disk assign -disk netappu-02:v6* -owner netappu-02

(storage disk assign)

netappu::> stor disk show -type SSD

(storage disk show)

Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-02:v6.16 520.5MB - - spare present - netappu-02










Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------











Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------










netappu::>

netappu::> stor aggr modify -aggr n02_fp1 -hybrid-enabled true

(storage aggregate modify)

netappu::>

netappu::> stor aggr add-disks -aggr n02_fp1 -diskcount 6 -disktype SSD

(storage aggregate add-disks)

netappu::> stor disk show -aggr n02_fp1

(storage disk show)

Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-02:v5.19 1020MB - - aggregate dparity n02_fp1 netappu-02

netappu-02:v5.20 1020MB - - aggregate parity n02_fp1 netappu-02

netappu-02:v5.21 1020MB - - aggregate data n02_fp1 netappu-02








Usable Container


---------------- ---------- ----- --- ----------- ---------- --------- --------

netappu-02:v6.16 520.5MB - - aggregate dparity n02_fp1 netappu-02

netappu-02:v6.17 520.5MB - - aggregate parity n02_fp1 netappu-02

netappu-02:v6.18 520.5MB - - aggregate data n02_fp1 netappu-02





Exe 6:

netappu::> vserver show

Admin Root Name Name

Vserver Type State Volume Aggregate Service Mapping

----------- ------- --------- ---------- ---------- ------- -------

netappu admin - - - - -

netappu-01 node - - - - -





--------- ------------ ------------ ---------- ---- ---------- ---------- -----

netappu-01


netappu-02




netappu::> vserver create -vserver vs1 -rootvolume vs1root -aggr n01_aggr1 -ns-switch file -rootvolume-security-style unix

[Job 23] Job succeeded: Successful

netappu::> vserver show

Admin Root Name Name

Vserver Type State Volume Aggregate Service Mapping

----------- ------- --------- ---------- ---------- ------- -------

netappu admin - - - - -



vs1 cluster running vs1root n01_aggr1 file file


netappu::> vserver show -vserver vs1

Vserver: vs1

Vserver Type: cluster

Vserver UUID: 2c33e6e9-9bb7-11e2-b3fb-123478563412

Root Volume: vs1root


Name Service Switch: file

Name Mapping Switch: file

NIS Domain: -

Root Volume Security Style: unix

LDAP Client: -

Language: C

Snapshot Policy: default

Comment:

Anti-Virus On-Access Policy: default

Quota Policy: default

List of Aggregates Assigned: -

Limit on Maximum Number of Volumes allowed: unlimited

Vserver Admin State: running

Allowed Protocols: nfs, cifs, fcp, iscsi

Disallowed Protocols: -

Is Repository Vserver: false



--------- ------------ ------------ ---------- ---- ---------- ---------- -----

netappu-01


netappu-02



vs1 vs1root n01_aggr1 online RW 20MB 18.89MB 5%


netappu::>

netappu::> volume show -vserver vs1 -volume vs1root

Vserver Name: vs1

Volume Name: vs1root

Aggregate Name: n01_aggr1

Volume Size: 20MB

Volume Data Set ID: 1025

Volume Master Data Set ID: 2147484673

Volume State: online

Volume Type: RW

Volume Style: flex

Is Cluster-Mode Volume: true

Is Constituent Volume: false

Export Policy: default

User ID: 0

Group ID: 1

Security Style: unix

UNIX Permissions: ---rwx------

Junction Path: /

Junction Path Source: -

Junction Active: -

Junction Parent Volume: -

Comment:


Total User-Visible Size: 19MB

Used Size: 108KB

Used Percentage: 5%

Autosize Enabled (for flexvols only): false

Maximum Autosize (for flexvols only): 23.91MB

Autosize Increment (for flexvols only): 1020KB

Total Files (for user-visible data): 566

Files Used (for user-visible data): 96

Space Guarantee Style: volume

Space Guarantee in Effect: true

Space Reserved for Snapshots: 5%

Snapshot Reserve Used: 5%


Creation Time: Tue Apr 02 17:03:11 2013

Clone Volume: false


NVFAIL Option: off

Is File System Size Fixed: false

Extent Option: off

Reserved Space for Overwrites: 0B

Fractional Reserve: 100%

Snapshot Cloning Dependency: off

Primary Space Management Strategy: volume_grow

Read Reallocation Option: off

Naming Scheme for Automatic Snapshots: create_time

Inconsistency in the File System: false

Is Volume Quiesced (On-Disk): false

Is Volume Quiesced (In-Memory): false

Volume Contains Shared or Compressed Data: false

Space Saved by Storage Efficiency: 0B

Percentage Saved by Storage Efficiency: 0%

Space Saved by Deduplication: 0B

Percentage Saved by Deduplication: 0%

Space Shared by Deduplication: 0B

Space Saved by Compression: 0B

Percentage Space Saved by Compression: 0%

Block Type: 64-bit

Constituent Volume Role: -

Is Volume Moving: false

Is Volume Move in Cutover Phase: false

Flash Pool Caching Eligibility: read-write

Flash Pool Write Caching Ineligibility Reason: -

netappu::>




--------- -------- --------- ----- ------- ------ ---------------- ------------


normal

aggr0_netappu_02_0


normal

n01_aggr1 2.64GB 2.62GB 1% online 1 netappu-01 raid_dp,

normal


normal

n02_fp1 7.03GB 7.03GB 0% online 0 netappu-02 raid_dp,

hybrid,

normal


netappu::> volume create -vserver vs1 -volume volume1 -aggr n01_aggr1 -junction-path /vol1


netappu::> vol show

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----

netappu-01


netappu-02



vs1 volume1 n01_aggr1 online RW 20MB 18.90MB 5%



netappu::> vol show -vserver vs1 -volume volume1

(volume show)

Vserver Name: vs1

Volume Name: volume1


Volume Size: 20MB




Volume Type: RW

Volume Style: flex




User ID: 0

Group ID: 1


UNIX Permissions: ---rwx------

Junction Path: /vol1

Junction Path Source: RW_volume

Junction Active: true

Junction Parent Volume: vs1root

Comment:



Used Size: 104KB

Used Percentage: 5%


Maximum Autosize (for flexvols only): 23.91MB

Autosize Increment (for flexvols only): 1020KB








Creation Time: Tue Apr 02 17:09:10 2013

Clone Volume: false


NVFAIL Option: off


Extent Option: off


















Block Type: 64-bit






netappu::>


GM Class:>)


Good morning Henry!


What's the advantage of DS4486? Thanks


Cool, when will you share the e-book with us? Thanks


:>) Thanks


Cool:>) Can't wait to get all your files!


How much performance hit could be? Thanks


Thanks


What's the diffrence compare with FAST VP from EMC? Thanks


OK. Thanks


Thanks

from Scott Anctil to Everyone:

For Flash Pool is RAID DP still recomeded or RAID 4?


First link: http://bit.ly/NTAPCM-1


Go to the link and click on FILE->DOWNLOAD to get the complete zip file...


Second link: http://bit.ly/NTAPCM-2


Done

from David Brown to Everyone:

done


Yes


Yes


When should I use Junctions? Thanks


OK


When should I use Infinite vol? Thanks


Thanks


Sorry, have to work on a cutomer call:<(...


Done Exe 6:>)

from Hector Martinez (privately):

Ok, great!

from Hector Martinez (privately):

Ill see you 1:15 pm


What's the diffrence between cluster ports & intercluster ports? Thanks


:>)


Yes


wHY 2 E3A?


Should be e3a & e3b?


Would you please forward that email from NAUon supported switches to me? Thanks


:>) Thanks


[email protected]


Module 7 slide 14 of the clustered ONTAP 8.1.1 materials lists Cisco Nexus switch 5548 is listed as support technology. It has been confirmed that this is NOT the case. Also, the Cisco Nexus 5010 and 5020 were end-of-life on Dec 31, 2012 (but still supported), the current configurations are as follows:2-8 nodes use NetApp CN16108-24 nodes use Cisco Nexus 5596

Will support Juniper in the end of 2013

Exe 7:

netappu::> network port show

Auto-Negot Duplex Speed (Mbps)

Node Port Role Link MTU Admin/Oper Admin/Oper Admin/Oper

------ ------ ------------ ---- ----- ----------- ---------- ------------

netappu-01

e0a cluster up 1500 true/true full/full auto/1000

e0b cluster up 1500 true/true full/full auto/1000

e0c data up 1500 true/true full/full auto/1000

e0d data up 1500 true/true full/full auto/1000

e0e data up 1500 true/true full/full auto/1000

e0f node-mgmt up 1500 true/true full/full auto/1000

netappu-02








netappu::>

Exe 8:

netappu::> net int create -vserver vs1 -lif data1 -role data -home-node netappu-01 -home-port a0a -address 192.168.66.131 -netmask 255.255.255.0

(network interface create)

Info: Your interface was created successfully; the routing group

d192.168.66.0/24 was created

netappu::> net int show




----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1

data1 up/up 192.168.66.131/24 netappu-01 a0a true


netappu::> net int show -vserver vs1 -lif data1


Vserver Name: vs1

Logical Interface Name: data1

Role: data

Data Protocol: nfs, cifs, fcache

Home Node: netappu-01

Home Port: a0a

Current Node: netappu-01

Current Port: a0a

Operational Status: up

Extended Status: -

Is Home: true

Network Address: 192.168.66.131

Netmask: 255.255.255.0

IPv4 Link Local: -

Bits in the Netmask: 24

Routing Group Name: d192.168.66.0/24

Administrative Status: up

Failover Policy: nextavail

Firewall Policy: data

Auto Revert: false

Use Failover Group: system-defined

Fully Qualified DNS Zone Name: none

Failover Group Name:

FCP WWPN: -

Comment:

netappu::> network routing-groups show

Routing

Vserver Group Subnet Role Metric

--------- --------- --------------- ------------ -------

netappu

c192.168.66.0/24

192.168.66.0/24 cluster-mgmt 20

netappu-01

c169.254.0.0/16

169.254.0.0/16 cluster 30

n192.168.66.0/24

192.168.66.0/24 node-mgmt 10

netappu-02

c169.254.0.0/16

169.254.0.0/16 cluster 30

n192.168.66.0/24

192.168.66.0/24 node-mgmt 10

vs1

d192.168.66.0/24

192.168.66.0/24 data 20


netappu::> network routing-groups route show

Routing

Vserver Group Destination Gateway Metric

--------- --------- --------------- --------------- ------

netappu

c192.168.66.0/24

0.0.0.0/0 192.168.66.2 20

netappu-01

n192.168.66.0/24

0.0.0.0/0 192.168.66.2 10

netappu-02

n192.168.66.0/24

0.0.0.0/0 192.168.66.2 10


netappu::> net int migrate -vserver vs1 -lif data1 -dest-node netappu-02 -dest-port e0c

(network interface migrate)





----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1

data1 up/up 192.168.66.131/24 netappu-02 e0c false


netappu::> net int show -vserver vs1 -lif data1


Vserver Name: vs1


Role: data



Home Port: a0a


Current Port: e0c


Extended Status: -

Is Home: false


Netmask: 255.255.255.0

IPv4 Link Local: -






Auto Revert: false




FCP WWPN: -

Comment:

netappu::> net int revert -vserver vs1 -lif data1

(network interface revert)

netappu::> net int modify -vserver vs1 -lif data1 -home-node netappu-02 -home-port e0d

(network interface modify)





----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1

data1 up/up 192.168.66.131/24 netappu-01 a0a false


netappu::> net int revert -vserver vs1 -lif data1






----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1

data1 up/up 192.168.66.131/24 netappu-02 e0d true


netappu::> net int show -vserver vs1 -lif data1 -instance


Vserver Name: vs1


Role: data



Home Port: e0d


Current Port: e0d


Extended Status: -

Is Home: true


Netmask: 255.255.255.0

IPv4 Link Local: -






Auto Revert: false




FCP WWPN: -

Comment:

netappu::> net int failover show

(network interface failover show)

Logical Home Failover Failover

Vserver Interface Node:Port Group Usage Group

-------- --------------- --------------------- --------------- ---------------

netappu

cluster_mgmt netappu-01:e0c enabled clusterwide

Failover Targets: netappu-01:e0c, netappu-01:a0a,

netappu-02:e0c, netappu-02:e0d,

netappu-02:e0e

netappu-01

clus1 netappu-01:e0a system-defined

clus2 netappu-01:e0b system-defined

mgmt1 netappu-01:e0f disabled

Failover Targets: netappu-01:e0f

netappu-02

clus1 netappu-02:e0a system-defined

clus2 netappu-02:e0b system-defined

mgmt1 netappu-02:e0f disabled

Failover Targets: netappu-02:e0f

vs1

data1 netappu-02:e0d system-defined

Failover Targets: netappu-02:e0d, netappu-02:e0e,

netappu-02:e0c, netappu-01:a0a,

netappu-01:e0c


netappu::> system node reboot -node netappu-02

Warning: Are you sure you want to reboot the node? {y|n}: y

login: admin

Password:

Waiting for PIDS: 731

netappu::> .

Waiting for PIDS: 708.

Terminated

.

System rebooting...

\

Hit [Enter] to boot immediately, or any other key for command prompt.

Booting...

x86_64/freebsd/image1/kernel data=0x80f178+0x138350 syms=[0x8+0x3b9a0+0x8+0x27619]

x86_64/freebsd/image1/platform.ko size 0x237fe8 at 0xaab000

NetApp Data ONTAP 8.1.2 Cluster-Mode

Copyright (C) 1992-2012 NetApp.

All rights reserved.

md1.uzip: 26368 x 16384 blocks

md2.uzip: 3584 x 16384 blocks

*******************************

* *

* Press Ctrl-C for Boot Menu. *

* *

Generating host.conf.

Apr 02 19:44:53 [netappu-02:nv.fake:CRITICAL]: 32 MB system memory being used to simulate NVRAM.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0f: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0e: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0d: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0c: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0b: Link up.

Apr 02 19:44:55 [netappu-02:netif.linkUp:info]: Ethernet e0a: Link up.

Apr 02 19:45:00 [netappu-02:diskown.isEnabled:info]: software ownership has been enabled for this system

Apr 02 19:45:00 [netappu-02:dcs.framework.enabled:info]: The DCS framework is enabled on this node.

route add: bad address: gw 127.0.20.1 equal to destination 127.0.2Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig'. The full command line is 'ifconfig lo 127.0.0.1'.

Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv losk 127.0.20.1'.

Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'route_priv'. The full command line is 'route_priv add host 127.0.20.1 127.0.20.1 0'.

Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 0'.

Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 127.0.0.1'.

Apr 02 19:45:00 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'route_priv'. The full command line is 'route_priv add host 127.0.10.1 127.0.20.1 0'.

0.1.

add host 127.0.10.1: gateway 127.0.20.1

WAFL CPLEDGER is enabled. Checklist = 0x7ff841ff

Apr 02 19:45:01 [netappu-02:wafl.memory.status:info]: 418MB of memory is currently available for the WAFL file system.

Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.16 is a local HA mailbox disk.

Apr 02 19:45:09 [netappu-02:fmmb.current.lock.disk:info]: Disk v5.17 is a local HA mailbox disk.

Apr 02 19:45:09 [netappu-02:fmmb.instStat.change:info]: normal mailbox instance on local side.

Apr 02 19:45:10 [netappu-02:coredump.host.spare.none:info]: No sparecore disk was found for host 0.

Apr 02 19:45:10 [netappu-02:raid.cksum.replay.summary:info]: Replayed 0 checksum blocks.

Apr 02 19:45:10 [netappu-02:raid.stripe.replay.summary:info]: Replayed 0 stripes.

Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb-123478563412' was built in 0 msec, after scanning 0 inodes and restarting -1 times with a final result of starting.

Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'n02_fp1' UUID 'daa17509-9ba7-11e2-b3fb-123478563412' was built in 0 msec, after scanning 2 inodes and restarting 0 times with a final result of success.

Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d77-11e2-a2c1-123478563412' was built in 0 msec, after scanning 0 inodes and restarting -1 times with a final result of starting.

Apr 02 19:45:12 [netappu-02:wafl.aggr.btiddb.build:info]: Buftreeid database for aggregate 'aggr0_netappu_02_0' UUID 'bc41b09e-7d77-11e2-a2c1-123478563412' was built in 125 msec, after scanning 12 inodes and restarting 4 times with a final result of success.

Apr 02 19:45:22 [netappu-02:kern.syslog.msg:notice]: The system was down for 107 seconds

Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum matches, not extracting local://tmp/prestage/mroot.tgz.

Apr 02 19:45:22 [netappu-02:tar.csum.match:info]: Stored checksum matches, not extracting local://tmp/prestage/pmroot.tgz.

Apr 02 19:45:25 [netappu-02:dfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk drives

netappu-02

Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'routed'. The full command line is 'routed off'.

Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'options'. The full command line is 'options dns.enable off'.

Apr 02 19:45:25 [netappu-02:kern.cli.cmd:debug]: Command line input: the command is 'options'. The full command line is 'options nis.enable off'.

Apr 02 19:45:25 [netappu-02:snmp.agent.msg.access.denied:warning]: Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters).

Apr 02 19:45:26 [netappu-02:mgr.opsmgr.autoreg.norec:warning]: No SRV records found for the System Manager server, or the server is not located on this subnet.

Apr 02 19:45:26 [netappu-02:perf.archive.start:info]: Performance archiver started. Sampling 21 objects and 339 counters.

Apr 02 19:45:26 [netappu-02:mgr.boot.disk_done:info]: NetApp Release 8.1.2 Cluster-Mode boot complete. Last disk update written at Tue Apr 2 19:43:27 GMT 2013

Apr 02 19:45:26 [netappu-02:cf.fm.missingAdapter:error]: Warning: cf is licensed yet an interconnect adapter was not found

Apr 02 19:45:26 [netappu-02:mgr.boot.reason_ok:notice]: System rebooted after a reboot command.

Apr 02 19:45:26 [netappu-02:callhome.reboot.reboot:info]: Call home for REBOOT (reboot command)

Can't set cifs branchcache server secret.

Apr 02 19:45:26 [netappu-02:httpd.config.mime.missing:warning]: /etc/httpd.mimetypes.sample file is missing.

Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims on volume: 'aggr0_netappu_02_0' iniatiated by : 'boot_grace_start'.

Apr 02 19:45:26 [netappu-02:lmgr.reclaim.locks:debug]: lock reclaims on volume: 'n02_fp1' iniatiated by : 'boot_grace_start'.

Apr 02 19:45:26 [netappu-02:ha.local.dbladeId:debug]: D-blade ID of the local node is dc8ab514-7d75-11e2-815e-15b4677aa19d.

Apr 02 19:45:26 [netappu-02:wafl.scan.start:info]: Starting HyA Hit Update on aggregate n02_fp1.

Apr 02 19:45:26 [netappu-02:clam.enable:info]: CLAM functionality is enabled.

Apr 02 19:45:26 [netappu-02:unowned.disk.reminder:info]: 14 disks are currently unowned. Use 'disk assign' to assign the disks to a filer.

Ipspace "acp-ipspace" created

rpc failed: RPC: Timed out

mroot is now available

mroot is now available

Tue Apr 2 19:47:14 UTC 2013

login:

netappu::> net int revert -vserver vs1 -lif data*






----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1



netappu::> network port show

Auto-Negot Duplex Speed (Mbps)

Node Port Role Link MTU Admin/Oper Admin/Oper Admin/Oper

------ ------ ------------ ---- ----- ----------- ---------- ------------

netappu-01

a0a data up 1500 true/- auto/full auto/1000

a0a-11 data up 1500 true/false auto/full auto/1000









netappu-02








netappu::> net port vlan show

(network port vlan show)

Network Network

Node VLAN Name Port VLAN ID MAC Address

------ --------- ------- -------- -----------------

netappu-01

a0a-11 a0a 11 02:50:56:ad:1a:bb

a0a-22 a0a 22 02:50:56:ad:1a:bb

a0a-33 a0a 33 02:50:56:ad:1a:bb


netappu::> net port vlan delete -node netappu-01 -vlan-name a0a-11

(network port vlan delete)





netappu::> set advanced

Warning: These advanced commands are potentially dangerous; use them only when

directed to do so by NetApp personnel.


netappu::*> net port modify -node netappu-01 -port a0a -up-admin false

(network port modify)

netappu::*> set admin

netappu::> net port ifgrp delete -node netappu-01 -ifgrp a0a

(network port ifgrp delete)

netappu::>

First link: http://bit.ly/NTAPCM-1


Go to the link and click on FILE->DOWNLOAD to get the complete zip file...


Second link: http://bit.ly/NTAPCM-2

http://bit.ly/NTAPCM-2

http://bit.ly/NTAPCM-1

Day 3

netappu::> vserver services ldap

netappu::vserver services ldap> ?

client> Manage LDAP client configurations

create Create an LDAP configuration

delete Delete an LDAP configuration

modify Modify an LDAP configuration

show Display LDAP configurations

netappu::vserver services ldap>

netappu::vserver services ldap> vserver services ldap show

This table is currently empty.

Microsoft Windows [Version 6.1.7601]

Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Administrator>net view ntapvs2

Shared resources at ntapvs2

?

Share name Type Used as Comment

-------------------------------------------------------------------------------

rootdir Disk

vol1 Disk

The command completed successfully.

C:\Users\Administrator>





?


-------------------------------------------------------------------------------

rootdir Disk

vol1 Disk


C:\Users\Administrator>net use * \\ntapvs2\vol1

Drive Z: is now connected to \\ntapvs2\vol1.


C:\Users\Administrator>net use * \\ntapvs2\rootdir

Drive Y: is now connected to \\ntapvs2\rootdir.


C:\Users\Administrator>dir z:

Volume in drive Z has no label.

Volume Serial Number is 8000-0405

Directory of Z:\

04/03/2013 08:06 AM <DIR> .

04/03/2013 08:06 AM <DIR> ..

0 File(s) 0 bytes

2 Dir(s) 398,331,904 bytes free

C:\Users\Administrator>dir y:

Volume in drive Y has no label.


Directory of Y:\

04/03/2013 08:09 AM <DIR> .

04/03/2013 08:09 AM <DIR> ..

04/03/2013 08:06 AM <DIR> vs2vol1

0 File(s) 0 bytes


C:\Users\Administrator>

netappu::> cifs share access-control show -vserver vs2

Share User/Group Access

Vserver Name Name Permission

-------------- ----------- --------------------------- -----------

vs2 rootdir Everyone Full_Control

vs2 vol1 Everyone Full_Control


netappu::> cifs share access-control modify -vserver vs2 -share vol1 -user-or-group Everyone Read

netappu::> cifs share access-control show -vserver vs2

Share User/Group Access

Vserver Name Name Permission

-------------- ----------- --------------------------- -----------

vs2 rootdir Everyone Full_Control

vs2 vol1 Everyone Read


netappu::> cifs share access-control modify -vserver vs2 -share vol1 -user-or-group Everyone Full_Control

netappu::> cifs home-directory search-path add -vserver vs2 -path /vs2vol1

netappu::> cifs home-directory search-path show

Vserver Position Path

----------- -------- -----------------

vs2 1 /vs2vol1

netappu::> cifs share create -vserver vs2 -share-name "~%w" -path "%w" -share-properties oplocks,browsable,changenotify,homedirectory

netappu::> cifs share show -vserver vs2

Vserver Share Path Properties Comment ACL

-------------- ------------- ----------------- ---------- -------- -----------

vs2 admin$ / browsable - -

vs2 ipc$ / browsable - -

vs2 rootdir / oplocks - Everyone / Full Control

browsable

changenotify

vs2 vol1 /vs2vol1 oplocks - Everyone / Full Control

browsable

changenotify

vs2 ~%w %w oplocks - Everyone / Full Control

browsable

changenotify

homedirectory






?


-------------------------------------------------------------------------------

rootdir Disk

vol1 Disk


C:\Users\Administrator>net use * \\ntapvs2\vol1

Drive Z: is now connected to \\ntapvs2\vol1.


C:\Users\Administrator>net use * \\ntapvs2\rootdir

Drive Y: is now connected to \\ntapvs2\rootdir.


C:\Users\Administrator>dir z:



Directory of Z:\

04/03/2013 08:06 AM <DIR> .

04/03/2013 08:06 AM <DIR> ..

0 File(s) 0 bytes


C:\Users\Administrator>dir y:

Volume in drive Y has no label.


Directory of Y:\

04/03/2013 08:09 AM <DIR> .

04/03/2013 08:09 AM <DIR> ..

04/03/2013 08:06 AM <DIR> vs2vol1

0 File(s) 0 bytes


C:\Users\Administrator>net use

New connections will not be remembered.

Status Local Remote Network

-------------------------------------------------------------------------------

Y: \\ntapvs2\rootdir Microsoft Windows Network

Z: \\ntapvs2\vol1 Microsoft Windows Network


C:\Users\Administrator>z:

Z:\>dir



Directory of Z:\

04/03/2013 08:06 AM <DIR> .

04/03/2013 08:06 AM <DIR> ..

0 File(s) 0 bytes


Z:\>md administrator

Z:\>dir



Directory of Z:\

04/03/2013 08:33 AM <DIR> .

04/03/2013 08:33 AM <DIR> ..

04/03/2013 08:33 AM <DIR> administrator

0 File(s) 0 bytes


Z:\>dir administrator



Directory of Z:\administrator

04/03/2013 08:33 AM <DIR> .

04/03/2013 08:33 AM <DIR> ..

0 File(s) 0 bytes


Z:\>net view \\ntapvs2

Shared resources at \\ntapvs2

?


-------------------------------------------------------------------------------

rootdir Disk

vol1 Disk

~Administrator Disk


Z:\>net use * \\ntapvs2\~administrator

Drive X: is now connected to \\ntapvs2\~administrator.


Z:\>x:

X:\>dir

Volume in drive X has no label.


Directory of X:\

04/03/2013 08:33 AM <DIR> .

04/03/2013 08:33 AM <DIR> ..

0 File(s) 0 bytes


X:\>

netappu::> vserver export-policy rule show -vserver vs2

Policy Rule Access Client RO

Vserver Name Index Protocol Match Rule

------------ --------------- ------ -------- --------------------- ---------

vs2 default 1 any 0.0.0.0/0 any

PuTTY to Linux01

login as: root

root@linux01's password:

Last login: Thu Mar 29 12:47:22 2012 from 192.168.1.139

[root@linux01 ~]# mkdir /mnt/vs2

[root@linux01 ~]# mkdir /mnt/path01

[root@linux01 ~]# mount -t nfs 192.168.66.132:/ /mnt/vs2

[root@linux01 ~]# mount -t nfs 192.168.66.132:/vs2vol1 /mnt/path01

[root@linux01 ~]# cd /mnt/vs2/vs2vol1/administrator/

[root@linux01 administrator]# ls

[root@linux01 administrator]#

[admin@linux01 ~]$ cd /mnt/path01

[admin@linux01 path01]$ cp /usr/include/* .

cp: omitting directory `/usr/include/ao'

cp: omitting directory `/usr/include/python2.6'

[admin@linux01 path01]$ ls

administrator netapi.h

[admin@linux01 path01]$

netappu::> vol show -volume vs2_vol01 -fields used

(volume show)

vserver volume used

------- --------- -----

vs2 vs2_vol01 212KB

[admin@linux01 path01]$ cd /mnt/vs2/path01

-bash: cd: /mnt/vs2/path01: No such file or directory

[admin@linux01 path01]$

How to create and understand vserver name-mapping rules in Data ONTAP Cluster-Mode

KB ID: 1013831 Version: 1.0 Published date: 05/17/2012 Categories: Administration, Data ONTAP 8.0 Cluster-Mode, Data ONTAP 8.0.x Cluster-Mode, Data ONTAP 8.1 Cluster-Mode, Data ONTAP GX

Description

Data ONTAP Cluster-Mode can be accessed by Common Internet File System protocol (CIFS) and Network File System (NFS).

Name-mapping is used to map CIFS users to UNIX users and vice versa.

In the CIFS world, for example, it is known as NETAPP\jdoe, but in NFS (NIS) it is just jdoe. Name-mappings are rules (actually, regular expressions), which are interpreted by the authentication system during login to resolve your identity and gather the credentials you need to access your files. Name-mapping is the first step in the process of ensuring that the person logging in can get to their files, regardless of which protocol they use to access the file server.

Note the similarity of the CIFS and NIS usernames; many organizations that buy NetApp products use a naming convention such as this. If they do, they can use a very simple regular expression that just strips off the CIFS domain name, and the delimiting \ to leave just the username. In other cases, where the correspondence between user names is not direct, they may need to enter a mapping for each and every user. The name mapping rule syntax has extra features that can be used to adjust the case of user names, in case that is an issue.

Name mapping rules use regular expressions to match the source user name, and substitute the matched expression for the destination. The source and destination are specified as the mapping direction: Either Windows - UNIX, UNIX - Windows, or Kerb - UNIX. (Kerberos mappings are only necessary if using a Kerberized NFS UNIX client. Most UNIX clients are NOT Kerberized).

Procedure

Some general guidelines:

Rules are vserver specific. Each vserver can have its own independent set of name mapping rules.

Rules are evaluated in order starting with rules in the first position. The first rule to match the source name wins, and processing stops at that point.

If no rule matches before reaching the end of the list, then a default name will be used. The default name is protocol specific (both CIFS and NFS each have their own default) and it is specified during the setup of the protocol.

To specify the default UNIX user for CIFS, see the vserver cifs options modify command and specify the -default-unix-user field.

To specify the default Windows user for NFS, see the vserver nfs modify command and specify the -default-win-user field.

\ characters must be escaped when entering the rule; escape them with another "\". Windows uses "\" as a delimiter between Domain and Username. So, for example, if you wish to match a single backslash in the source name, put

in two backslashes as follows:

DOMAINNAME\\* -> \1

Use _ to force the matched destination name into lowercase.

Use ^ to force the matched destination name into uppercase.

Use & to force the matched destination name into initial case (the first character is capitalized, and all remaining characters are lower cased; for example, bob -> Bob).

Examples:

Mapping direction: Windows - UNIX

DOMAINNAME\\(.+) -> \1

This rule is by far, the most common rule you'll see in production. This matches a user whose Login ID consists of the literal characters DOMAINNAME\ plus, at least 1 character, up to any number of characters. The

literal text DOMAINNAME\ must occur as part of the name. The . represents any single character, and the + says, any number of characters may follow. Note that this rule is better than the similar

rule DOMAINNAME\\(*) because it requires at least 1 character to match. The * would match any user name, but would also match a user name without a single character, resulting in a 0 length target name

if a user typed in DOMAINNAME\\, for example.

https://kb.netapp.com/support/index?page=content&channel=HOW_TO&cat=DATA_ONTAP_GX

https://kb.netapp.com/support/index?page=content&channel=HOW_TO&cat=DATA_ONTAP_8.1_CLUSTER_MODE

https://kb.netapp.com/support/index?page=content&channel=HOW_TO&cat=DATA_ONTAP_8.0.X_CLUSTER_MODE

https://kb.netapp.com/support/index?page=content&channel=HOW_TO&cat=DATA_ONTAP_8.0_CLUSTER_MODE

https://kb.netapp.com/support/index?page=content&channel=HOW_TO&cat=ADMINISTRATION


DOMAINNAME\\(.)(.+) -> \_1\2This rule shows an example using multiple arguments. The first (.) will match any single character, and the translation rule on the UNIX side will cause the matched character to become lowercase. The second (.+) will match one or more characters, and the translation rule will cause it to be appended immediately after the first argument, without modification (i.e., no uppercasing or lowercasing). Note that this rule matches only usernames at least 2 characters in length.


(.+)\\(.+) -> \2This rule matches any Windows Domain Name, drops the domain and uses only the second matched parameter. This rule can be a little weird because it may result in multiple users being mapped to the same UNIX user. For example:

DOMAINNAME\\root -> rootDOMAINNAME2\\root -> rootIn this case, the user root from DOMAINNAME will be mapped to UNIX user root. If someone from DOMAINNAME2 connects with username root, they will also translate to user root.

Exe 10

Yahoo is the biggest NA user



C:\Users\Administrator>cd "C:\Program Files\NetApp\Windows Host Utities"

The system cannot find the path specified.

C:\Users\Administrator>cd ..

C:\Users>cd ..

C:\>dir

Volume in drive C has no label.

Volume Serial Number is C87A-766E

Directory of C:\

09/12/2012 10:03 AM <DIR> inetpub

09/10/2012 10:09 PM <DIR> NETAPP

07/13/2009 08:20 PM <DIR> PerfLogs

04/01/2013 02:50 PM <DIR> Program Files

11/27/2012 04:34 AM <DIR> Program Files (x86)

04/03/2013 12:39 PM <DIR> temp

09/12/2012 08:01 AM <DIR> Users

11/28/2012 05:40 AM <DIR> Windows

12/01/2012 12:12 PM <DIR> _Files

0 File(s) 0 bytes

9 Dir(s) 14,900,826,112 bytes free

C:\>cd "Program Files"

C:\Program Files>dir



Directory of C:\Program Files

04/01/2013 02:50 PM <DIR> .

04/01/2013 02:50 PM <DIR> ..

09/07/2012 11:05 PM <DIR> Common Files

11/28/2012 05:40 AM <DIR> Hyper-V

11/20/2010 08:33 PM <DIR> Internet Explorer

03/20/2013 06:47 PM <DIR> Java

09/07/2012 04:22 PM <DIR> MSBuild

04/03/2013 12:39 PM <DIR> NetApp

11/28/2012 05:40 AM <DIR> Packaged Programs

09/13/2012 08:34 AM <DIR> ppedv

09/07/2012 04:22 PM <DIR> Reference Assemblies

09/07/2012 11:05 PM <DIR> VMware

09/13/2012 08:52 AM <DIR> Windows Live

11/20/2010 08:33 PM <DIR> Windows Mail

07/13/2009 10:37 PM <DIR> Windows NT

0 File(s) 0 bytes

15 Dir(s) 14,900,826,112 bytes free

C:\Program Files>cd Net*

C:\Program Files\NetApp>dir



Directory of C:\Program Files\NetApp

04/03/2013 12:39 PM <DIR> .

04/03/2013 12:39 PM <DIR> ..

04/01/2013 02:51 PM <DIR> OnCommand System Manager

04/03/2013 12:39 PM <DIR> Windows Host Utilities

0 File(s) 0 bytes

4 Dir(s) 14,900,826,112 bytes free

C:\Program Files\NetApp>cd W*

C:\Program Files\NetApp\Windows Host Utilities>dir



Directory of C:\Program Files\NetApp\Windows Host Utilities

04/03/2013 12:39 PM <DIR> .

04/03/2013 12:39 PM <DIR> ..

10/10/2011 12:15 PM 67,584 LinuxGuestConfig.iso

10/10/2011 12:15 PM 1,679,446 mbralign.exe

04/03/2013 12:39 PM <DIR> NetAppQCLI

04/27/2011 02:19 AM 212,207 NOTICE.PDF

10/10/2011 12:14 PM 63,488 san_version.exe

4 File(s) 2,022,725 bytes

3 Dir(s) 14,900,826,112 bytes free

C:\Program Files\NetApp\Windows Host Utilities>san_version

Windows(R) Host Utilities 6.0.4108.1216

NetApp version: 6.0

C:\Program Files\NetApp\Windows Host Utilities>

Iqn.1991-05.com.microsoft:nadc.netappu.com

Exe 11



C:\Users\Administrator>cd "C:\Program Files\NetApp\Windows Host Utities"

The system cannot find the path specified.

C:\Users\Administrator>cd ..

C:\Users>cd ..

C:\>dir



Directory of C:\

09/12/2012 10:03 AM <DIR> inetpub

09/10/2012 10:09 PM <DIR> NETAPP

07/13/2009 08:20 PM <DIR> PerfLogs

04/01/2013 02:50 PM <DIR> Program Files

11/27/2012 04:34 AM <DIR> Program Files (x86)

04/03/2013 12:39 PM <DIR> temp

09/12/2012 08:01 AM <DIR> Users

11/28/2012 05:40 AM <DIR> Windows

12/01/2012 12:12 PM <DIR> _Files

0 File(s) 0 bytes

9 Dir(s) 14,900,826,112 bytes free

C:\>cd "Program Files"

C:\Program Files>dir



Directory of C:\Program Files

04/01/2013 02:50 PM <DIR> .

04/01/2013 02:50 PM <DIR> ..

09/07/2012 11:05 PM <DIR> Common Files

11/28/2012 05:40 AM <DIR> Hyper-V

11/20/2010 08:33 PM <DIR> Internet Explorer

03/20/2013 06:47 PM <DIR> Java

09/07/2012 04:22 PM <DIR> MSBuild

04/03/2013 12:39 PM <DIR> NetApp

11/28/2012 05:40 AM <DIR> Packaged Programs

09/13/2012 08:34 AM <DIR> ppedv

09/07/2012 04:22 PM <DIR> Reference Assemblies

09/07/2012 11:05 PM <DIR> VMware

09/13/2012 08:52 AM <DIR> Windows Live

11/20/2010 08:33 PM <DIR> Windows Mail

07/13/2009 10:37 PM <DIR> Windows NT

0 File(s) 0 bytes

15 Dir(s) 14,900,826,112 bytes free

C:\Program Files>cd Net*

C:\Program Files\NetApp>dir



Directory of C:\Program Files\NetApp

04/03/2013 12:39 PM <DIR> .

04/03/2013 12:39 PM <DIR> ..

04/01/2013 02:51 PM <DIR> OnCommand System Manager

04/03/2013 12:39 PM <DIR> Windows Host Utilities

0 File(s) 0 bytes

4 Dir(s) 14,900,826,112 bytes free

C:\Program Files\NetApp>cd W*

C:\Program Files\NetApp\Windows Host Utilities>dir



Directory of C:\Program Files\NetApp\Windows Host Utilities

04/03/2013 12:39 PM <DIR> .

04/03/2013 12:39 PM <DIR> ..

10/10/2011 12:15 PM 67,584 LinuxGuestConfig.iso

10/10/2011 12:15 PM 1,679,446 mbralign.exe

04/03/2013 12:39 PM <DIR> NetAppQCLI

04/27/2011 02:19 AM 212,207 NOTICE.PDF

10/10/2011 12:14 PM 63,488 san_version.exe

4 File(s) 2,022,725 bytes

3 Dir(s) 14,900,826,112 bytes free

C:\Program Files\NetApp\Windows Host Utilities>san_version

Windows(R) Host Utilities 6.0.4108.1216

NetApp version: 6.0

C:\Program Files\NetApp\Windows Host Utilities>ls /mnt/vs2/dataefficiency

'ls' is not recognized as an internal or external command,

operable program or batch file.

C:\Program Files\NetApp\Windows Host Utilities>net use t: \\ntapvs2\de


C:\Program Files\NetApp\Windows Host Utilities>t:

T:\>dir

Volume in drive T has no label.


Directory of T:\

04/03/2013 02:03 PM <DIR> .

04/03/2013 02:03 PM <DIR> ..

04/03/2013 02:03 PM 57 datafile

1 File(s) 57 bytes


T:\>

Day 4

Is there a Clustered ONTAP version Like (0) Report Abuse Reply

michael cope Apr 4, 2013 4:27 AM (in response to adrianlowe)Not yet. Someone else is working on that and they've decided to hold off until 8.2 comes out rather than have to re-write it. The cDOT documentation set on the Support website has a Command Map document that compares 7-Mode commands with the equivalent cDOT commands

Exe 12

login: admin

Password:

netappu::> volume create -vserver vs2 -volume vs2_root_ls1 -aggr n01_aggr1 -type dp


netappu::> snapmirror create -source-cluster netappu -source-vserver vs2 -source-volume vs2_root -destination-cluster netappu -destination-vserver vs2 -destination-volume vs2_root_ls1 -type ls

[Job 61] Job succeeded: SnapMirror: done appu://vs2/vs2_root_ls1.

https://communities.netapp.com/docs/DOC-18943#comment-17445

https://communities.netapp.com/docs/DOC-18943#comment-17459

https://communities.netapp.com/people/mcope

https://communities.netapp.com/message-abuse!input.jspa?objectID=17445&objectType=105

https://communities.netapp.com/docs/DOC-18943

https://communities.netapp.com/docs/DOC-18943

https://communities.netapp.com/people/mcope

netappu::> volume create -vserver vs2 -volume vs2_root_ls2 -aggr n02_aggr1 -type dp [Job 63] Job succeeded: Successful

netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_ls2 -type ls [Job 64] Job succeeded: SnapMirror: done appu://vs2/vs2_root_ls2.

netappu::>

netappu::> snapmirror show

Source Destination Mirror Relationship Total

Path Type Path State Status Progress Healthy

------------- ---- ------------ ------------- -------------- ---------- -------

netappu://vs2/vs2_root

LS netappu://vs2/vs2_root_ls1

Uninitialized Idle - -

netappu://vs2/vs2_root_ls2



netappu::> snapmirror show -instance

Source Path: netappu://vs2/vs2_root

Destination Path: netappu://vs2/vs2_root_ls1

Relationship Type: LS

Managing Vserver: vs2

SnapMirror Schedule: -

Tries Limit: 8

Throttle (KB/sec): unlimited

Mirror State: Uninitialized

Relationship Status: Idle

Transfer Snapshot: -

Snapshot Progress: -

Total Progress: -

Snapshot Checkpoint: -

Newest Snapshot: -

Newest Snapshot Timestamp: -

Exported Snapshot: -

Exported Snapshot Timestamp: -

Healthy: -

Constituent Relationship: false






Tries Limit: 8






Total Progress: -


Newest Snapshot: -




Healthy: -



netappu::>

netappu::> snapmirror initialize-ls-set -source-path netappu://vs2/vs2_root

[Job 65] Job is queued: snapmirror initialize-ls-set for source netappu://vs2/vs2_root.




------------- ---- ------------ ------------- -------------- ---------- -------



Uninitialized Transferring 68KB -


Uninitialized Transferring 68KB -


netappu::>

netappu::> vol create -vserver vs2 -vol vs2_root_dp1 -aggr n01_aggr1 -type dp

(volume create)


netappu::> vol create -vserver vs2 -vol vs2_root_dp2 -aggr n02_aggr1 -type dp

(volume create)


netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp1 -type dp

[Job 68] Job succeeded: SnapMirror: done appu://vs2/vs2_root_dp1.

netappu::> snapmirror create -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp2 -type dp

[Job 70] Job succeeded: SnapMirror: done appu://vs2/vs2_root_dp2.




------------- ---- ------------ ------------- -------------- ---------- -------


DP netappu://vs2/vs2_root_dp1


netappu://vs2/vs2_root_dp2



Snapmirrored Idle - true




netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp1

[Job 72] Job is queued: snapmirror initialize of destination netappu://vs2/vs2_root_dp1.

netappu::>

netappu::> vol snapshot show -vserver vs2 -vol vs2_root

(volume snapshot show)

---Blocks---

Vserver Volume Snapshot State Size Total% Used%

-------- ------- ------------------------------- -------- -------- ------ -----

vs2 vs2_root

daily.2013-04-04_0010 valid 68KB 0% 35%

hourly.2013-04-04_1005 valid 68KB 0% 35%

hourly.2013-04-04_1105 valid 68KB 0% 35%

hourly.2013-04-04_1205 valid 68KB 0% 35%

hourly.2013-04-04_1305 valid 68KB 0% 35%

hourly.2013-04-04_1405 valid 68KB 0% 35%

hourly.2013-04-04_1505 valid 68KB 0% 35%

snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_154441

valid 60KB 0% 33%


valid 48KB 0% 28%


netappu::>

netappu::> snapmirror show -inst


Destination Path: netappu://vs2/vs2_root_dp1

Relationship Type: DP



Tries Limit: 8


Mirror State: Snapmirrored




Total Progress: -


Newest Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443

Newest Snapshot Timestamp: 04/04 15:54:43

Exported Snapshot: snapmirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_155443

Exported Snapshot Timestamp: 04/04 15:54:43

Healthy: true







Tries Limit: 8






Total Progress: -


Newest Snapshot: -




Healthy: -







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true



netappu::>

netappu::> snapmirror initialize -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp2 -foreground true

[Job 73] Job succeeded: SnapMirror: done mirror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484685.2013-04-04_155826.







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true



netappu::>



---Blocks---


-------- ------- ------------------------------- -------- -------- ------ -----

vs2 vs2_root

daily.2013-04-04_0010 valid 68KB 0% 36%

hourly.2013-04-04_1005 valid 68KB 0% 36%

hourly.2013-04-04_1105 valid 68KB 0% 36%

hourly.2013-04-04_1205 valid 68KB 0% 36%

hourly.2013-04-04_1305 valid 68KB 0% 36%

hourly.2013-04-04_1405 valid 68KB 0% 36%

hourly.2013-04-04_1505 valid 68KB 0% 36%


valid 60KB 0% 33%


valid 60KB 0% 33%


valid 56KB 0% 32%


netappu::> snapmirror update -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp* -foreground true

[Job 74] Job succeeded: SnapMirror: done ror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484684.2013-04-04_160147.

[Job 75] Job succeeded: SnapMirror: done _dp2.

2 entries were acted on.







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true



netappu::>



---Blocks---


-------- ------- ------------------------------- -------- -------- ------ -----

vs2 vs2_root

daily.2013-04-04_0010 valid 68KB 0% 35%

hourly.2013-04-04_1005 valid 68KB 0% 35%

hourly.2013-04-04_1105 valid 68KB 0% 35%

hourly.2013-04-04_1205 valid 68KB 0% 35%

hourly.2013-04-04_1305 valid 68KB 0% 35%

hourly.2013-04-04_1405 valid 68KB 0% 35%

hourly.2013-04-04_1505 valid 68KB 0% 35%


valid 60KB 0% 33%


valid 68KB 0% 35%


valid 72KB 0% 37%


netappu::>

Task 3

netappu::> vol create -vserver vs2 -vol vs2_vol03 -aggr n01_aggr1 -junction-path /vs2vol3

(volume create)


Notice: Volume vs2_vol03 now has a mount point from volume vs2_root. The load

sharing (LS) mirrors of volume vs2_root have no replication schedule.

Volume vs2_vol03 will not be visible in the global namespace until the

LS mirrors of volume vs2_root have been updated.

login as: root

root@linux01's password:

Last login: Wed Apr 3 14:04:00 2013 from nadc.netappu.com

[root@linux01 ~]# cd /mnt/vs2

[root@linux01 vs2]# ls

dataefficiency vs2vol1

[root@linux01 vs2]#

netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root

[Job 77] Job is queued: snapmirror update-ls-set for source netappu://vs2/vs2_root.

[root@linux01 vs2]# ls /mnt/vs2

dataefficiency vs2vol1 vs2vol3

[root@linux01 vs2]#

[root@linux01 vs2]# touch /mnt/vs2/myfile

touch: cannot touch `/mnt/vs2/myfile': Read-only file system

[root@linux01 vs2]#

[root@linux01 vs2]# mkdir /mnt/vs2rw

[root@linux01 vs2]# mount 192.168.66.132:/.admin /mnt/vs2rw

[root@linux01 vs2]# touch /mnt/vs2/myfile

touch: cannot touch `/mnt/vs2/myfile': Read-only file system

[root@linux01 vs2]# ls /mnt/vs2rw/myfile

ls: cannot access /mnt/vs2rw/myfile: No such file or directory

[root@linux01 vs2]# mount 192.168.66.132:/ .admin /mnt/vs2rw

Usage: mount -V : print version

mount -h : print this help

mount : list mounted filesystems

mount -l : idem, including volume labels

So far the informational part. Next the mounting.

The command is `mount [-t fstype] something somewhere'.

Details found in /etc/fstab may be omitted.

mount -a [-t|-O] ... : mount all stuff from /etc/fstab

mount device : mount device at the known place

mount directory : mount known device here

mount -t type dev dir : ordinary mount command

Note that one does not really mount a device, one mounts

a filesystem (of the given type) found on the device.

One can also mount an already visible directory tree elsewhere:

mount --bind olddir newdir

or move a subtree:

mount --move olddir newdir

One can change the type of mount containing the directory dir:

mount --make-shared dir

mount --make-slave dir

mount --make-private dir

mount --make-unbindable dir

One can change the type of all the mounts in a mount subtree

containing the directory dir:

mount --make-rshared dir

mount --make-rslave dir

mount --make-rprivate dir

mount --make-runbindable dir

A device can be given by name, say /dev/hda1 or /dev/cdrom,

or by label, using -L label or by uuid, using -U uuid .

Other options: [-nfFrsvw] [-o options] [-p passwdfd].

For many more details, say man 8 mount .

[root@linux01 vs2]#

[root@linux01 vs2]# ls /mnt/vs2/myfile

ls: cannot access /mnt/vs2/myfile: No such file or directory

[root@linux01 vs2]#

netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root

[Job 77] Job is queued: snapmirror update-ls-set for source netappu://vs2/vs2_root.

netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root -foreground true

[Job 78] Job succeeded: SnapMirror: done irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_161534.

[root@linux01 vs2]# ls /mnt/vs2/myfile

ls: cannot access /mnt/vs2/myfile: No such file or directory

[root@linux01 vs2]#

Task 4

netappu::> job schedule show

Name Type Description

----------- --------- -----------------------------------------------------

5min cron @:00,:05,:10,:15,:20,:25,:30,:35,:40,:45,:50,:55

8hour cron @2:15,10:15,18:15

RepositoryBalanceMonitorJobSchedule

interval Every 10m

avUpdateSchedule

cron @2:00

daily cron @0:10

hourly cron @:05

weekly cron Sun@0:15


netappu::> snapmirror modify -destination-path netappu://vs2/vs2_root_ls1 -schedule 5min

[Job 79] Job is queued: snapmirror modify the relationship with destination netappu://vs2/vs2_root_ls1.

netappu::> snapmirror show -destination-path netappu://vs2/vs2_root_ls* -instance





SnapMirror Schedule: 5min

Tries Limit: 8



Relationship Status: Transferring



Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: false



netappu::>

netappu::> snapmirror modify -destination-path netappu://vs2/vs2_root_dp1 -schedule hourly

[Job 80] Job is queued: snapmirror modify the relationship with destination netappu://vs2/vs2_root_dp1.

netappu::> snapmirror show -instance





SnapMirror Schedule: hourly

Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true







Tries Limit: 8






Total Progress: -






Healthy: true



netappu::>

netappu::> system date show

Node Date Timezone

--------- ------------------- -------------------------

netappu-01

4/4/2013 16:22:54 Etc/UTC

netappu-02

4/4/2013 16:28:21 Etc/UTC


Task 5

netappu::> vol show -vol vs2_root*

(volume show)

Error: Ambiguous argument. Possible matches include:

-volume

-volume-style

netappu::> vol show -volume vs2_root*

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----

vs2 vs2_root n02_aggr1 online RW 20MB 18.88MB 5%

vs2 vs2_root_dp1 n01_aggr1 online DP 20MB 18.88MB 5%


vs2 vs2_root_ls1 n01_aggr1 online LS 20MB 18.88MB 5%



netappu::> snapmirror promote -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_ls1

Warning: Promote will delete the read-write volume netappu://vs2/vs2_root and

replace it with netappu://vs2/vs2_root_ls1.


[Job 81] Job succeeded: SnapMirror: done t_ls1.

netappu::> vol show -volume vs2_root*

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----



vs2 vs2_root_ls1 n01_aggr1 online RW 20MB 18.88MB 5%






------------- ---- ------------ ------------- -------------- ---------- -------


DP netappu://vs2/vs2_root_dp1


netappu://vs2/vs2_root_dp2





netappu::> snapmirror update-ls-set -source-path netappu://vs2/vs2_root_ls1 -foreground true

[Job 82] Job succeeded: SnapMirror: done irror.b290138c-9aee-11e2-bbf1-123478563412_4_2147484676.2013-04-04_162940.

Task 6

login: admin

(cluster setup)










create

System Defaults:








Enter the cluster name: other


Creating cluster other


Cluster other has been created.
















Enter the cluster management interface port [e0c]:










SFO is licensed.




Where is the controller located []: netappu

Enter the node management interface port [e0f]:









those nodes.





1) Using the NetApp System Manager to manage cluster other at 192.168.66.125.







login:

login: admin

(cluster setup)










create

System Defaults:








Enter the cluster name: other


Creating cluster other


Cluster other has been created.
















Enter the cluster management interface port [e0c]:










SFO is licensed.




Where is the controller located []: netappu










those nodes.












login:

Re-join node3/4

login: admin

(cluster setup)










join

System Defaults:






Step 1 of 3: Join an Existing Cluster


Enter the name of the cluster you would like to join {netappu, other}:

other

Joining cluster other

Starting cluster support services ....

This node has joined the cluster other.



SFO is licensed.






Enter the node management interface netmask [255.255.255.0]:

Enter the node management interface default gateway [192.168.66.2]:






those nodes.












login:

Exe 14

netappu::> vol show

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----

netappu-01


netappu-02




vs1 volume2 n02_aggr1 online RW 400GB 244.1MB 99%


vs2 dataefficiency

n02_aggr1 online RW 100MB 58.26MB 41%

vs2 dataefficiency_clone_splited






vs2 vs2_vol01 n01_aggr1 online RW 400MB 379.8MB 5%


vsISCSI1 lun_vsISCSI1_1_vol

n01_aggr1 online RW 123.3MB 20.76MB 83%


--------- ------------ ------------ ---------- ---- ---------- ---------- -----

vsISCSI1 vsISCSI1_root



netappu::> vol snapshot show -volume vs2_vol01


---Blocks---


-------- ------- ------------------------------- -------- -------- ------ -----

vs2 vs2_vol01

daily.2013-04-04_0010 valid 84KB 0% 26%

hourly.2013-04-04_1405 valid 88KB 0% 27%

hourly.2013-04-04_1505 valid 88KB 0% 27%

hourly.2013-04-04_1605 valid 88KB 0% 27%

hourly.2013-04-04_1705 valid 88KB 0% 27%

hourly.2013-04-04_1805 valid 88KB 0% 27%

hourly.2013-04-04_1905 valid 88KB 0% 27%


netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n01_aggr1 -foreground true

(volume move start)

Volume vs2_vol01 is already on aggregate n01_aggr1.


(volume move start)

Error: command failed: There is 244.1MB of available space on the aggregate

n02_aggr1 which is not enough to accommodate a volume.


netappu::> job show

Owning

Job ID Name Vserver Node State

------ -------------------- ---------- -------------- ----------

1 Certificate Expiry Check

netappu - Queued

Description: Certificate Expiry Check

2 CLUSTER BACKUP AUTO 8hour

netappu - Queued

Description: Cluster Backup Job

3 CLUSTER BACKUP AUTO daily

netappu - Queued


4 CLUSTER BACKUP AUTO weekly

netappu - Queued


5 Vol Reaper netappu - Queued

Description: Vol Reaper Job

62 SnapMirrorDaemon_4_2147484676

netappu netappu-01 Dormant

Description: Snapmirror Daemon for 4_2147484676




Owning


------ -------------------- ---------- -------------- ----------





netappu::> job show -id 71

Owning


------ -------------------- ---------- -------------- ----------




netappu::>

Task 2




--------- -------- --------- ----- ------- ------ ---------------- ------------


normal

aggr0_netappu_02_0


normal


normal

n02_aggr1 2.64GB 240.1MB 91% online 5 netappu-01 raid_dp,

normal

n02_fp1 7.03GB 7.03GB 0% online 0 netappu-02 raid_dp,

hybrid,

normal


netappu::> vol show -aggr n01_aggr1

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----







vsISCSI1 lun_vsISCSI1_1_vol

n01_aggr1 online RW 123.3MB 20.76MB 83%

vsISCSI1 vsISCSI1_root



netappu::>

netappu::> stor aggr create -aggr n01_aggr1_new -diskcount 6



netappu::> vol move start -vserver vs2 -volume vs2_vol01 -destination-aggregate n01_aggr1_new

(volume move start)

[Job 87] Job is queued: Move "vs2_vol01" in Vserver "vs2" to aggregate "n01_aggr1_new". Use the "volume move show -vserver vs2 -volume vs2_vol01" command t

netappu::> stor aggr show n01_aggr1



Size: 2.64GB

Used Size: 347.1MB

Used Percentage: 13%


State: online

Nodes: netappu-01

Number Of Disks: 5



netappu-01:v5.20,

netappu-01:v5.21,

netappu-01:v5.22,

netappu-01:v5.24




RAID Type: raid_dp

Max RAID Size: 16




Inconsistent: false

Hybrid: false



HA Policy: sfo




Volume Style: flex



Is Root: false

Block Type: 64-bit


netappu::> stor aggr delete n01_aggr1

(storage aggregate delete)

Warning: Are you sure you want to destroy aggregate "n01_aggr1"?

{y|n}: y

Error: command failed: It is not allowed to delete an aggregate that contains

volume(s). Please first remove all of the volumes on the aggregate.

netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr1

(storage aggregate rename)

Error: comma netappu::> stor aggr rename -aggr n01_aggr1_new -newname n01_aggr2

(storage aggregate rename)


nd failed: An aggregate already uses n01_aggr1 as name

Task 3

netappu::> net int modify -vserver vs2 -lif


Error: Missing value for -lif.





----------- ---------- ---------- ------------------ ------------- ------- ----

netappu


netappu-01




netappu-02




vs1


vs2

vs2nas1 up/up 192.168.66.132/24 netappu-02 e0d true


vsISCSI1

netappu-01_iscsi_if1

up/up 192.168.66.134/24 netappu-01 e0c true


up/up 192.168.66.135/24 netappu-01 e0d true



----------- ---------- ---------- ------------------ ------------- ------- ----

vsISCSI1


up/up 192.168.66.136/24 netappu-02 e0c true


up/up 192.168.66.137/24 netappu-02 e0d true


netappu::> net int modify -vserver vs2 -lif data1 -firewall-policy mgmt


Error: command failed: entry doesn't exist

netappu::> net int modify -vserver vs2 -lif vs2nas1 -firewall-policy mgmt


netappu::>

login as: vs2admin

Using keyboard-interactive authentication.

Password:

vs2::> cluster show

Error: "cluster" is not a recognized command

vs2::>

vs2::> vol show

(volume show)


--------- ------------ ------------ ---------- ---- ---------- ---------- -----

vs2 dataefficiency


vs2 dataefficiency_clone_splited









vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2admin"

(volume modify)

vs2::> vol show -volume vs2_vol01 -instance

(volume show)

Vserver Name: vs2

Volume Name: vs2_vol01


Volume Size: 400MB




Volume Type: RW

Volume Style: flex




User ID: 0

Group ID: 1


UNIX Permissions: ---rwxrwxrwx

Junction Path: /vs2vol1

Junction Path Source: RW_volume

Junction Active: true

Junction Parent Volume: vs2_root_ls1

Comment: modified by vs2admin



Used Size: 252KB

Used Percentage: 5%


Maximum Autosize (for flexvols only): 480MB

Autosize Increment (for flexvols only): 20MB








Creation Time: Wed Apr 03 15:06:12 2013

Clone Volume: false


NVFAIL Option: off


Extent Option: off


















Block Type: 64-bit






vs2::>

login as: vs2intern

Using keyboard-interactive authentication.

Password:

vs2::> network port show

Error: "port" is not a recognized command

vs2::> network int show



----------- ---------- ---------- ------------------ ------------- ------- ----

vs2




vs2::> vol modify -volume vs2_vol01 -comment "modified by vs2intern"

Error: "modify" is not a recognized command

vs2::>

C mode class

Technology

cluster base license

additional license key

zofnaahkwvmadfiscsi

valid license key

bakjzzgkwvmadfnfs license

rqqqxzgkwvmadfcifs license

feature license keys

cluster interfaces