BWK-01/TNC The Body Worn Kit type BWK-01/TNC is a special system enabling end fed (monopole) or center-fed (dipole) handheld or manpack antennas to be used in so called "body worn extended mode": antenna is not anymore attached to the radio and hidden by the operator's body but it is attached and elevated with the body worn kit which can be attached to the standard MOLLE jacket. This way the antenna is exposed over the operator's body which greatly enhances the antenna radiation efficiency. All parts are made of aluminium, brass, stainless steel or heavy durable plastic materials. BWK-01/TNC is composed of - Goose Neck Extension (GNE) Unit length of 800 mm with TNC female connector on the top and a special Current Choke Unit (CCU) at the bottom. GNE is made of flexible metal tube covered and protected by a heatshrinkable tube and is acting also as a metal counterpoise for the end-fed type antennas. - A set of MOLLE attachment textile clips. Two of them are intended for attaching the GNE in horizontal and two of them for attaching of the GNE in vertical position. - 1 m of coaxial cable RG-223 C/U with TNC male connectors (attachment to the GNE unit and to the radio unit) TRIVAL ANTENE d.o.o., Gorenjska c. 25, 1234 MENGES, SLOVENIA; tel. +386-1-8314-396; fax. +386-1-8313-377 email: [email protected]; www.trival-antennas-mast.com 20-520 MHz 50 ohm 20 W CW 800 mm 390 g 550 g MIL-STD-810G TECHNICAL SPECIFICATIONS: Frequency range Impedance Max. power GNE length GNE weight BWK weight Environmental specs. MOLLE attachments horizontal MOLLE attachments vertical Goose Neck Extension Unit (GNE) 1m RG-223 cable Date: 04.03.2020 (for attaching vertically) GNE (for attaching horizontally) GNE
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BWK-01/TNC
The Body Worn Kit type BWK-01/TNC is a special system enabling end fed (monopole) or center-fed (dipole) handheld or manpack antennas to be used in so called "body worn extended mode": antenna is not anymore attached to the radio and hidden by the operator's body but it is attached and elevated with the body worn kit which can be attached to the standard MOLLE jacket. This way the antenna is exposed over the operator's body which greatly enhances the antenna radiation efficiency.All parts are made of aluminium, brass, stainless steel or heavy durable plastic materials.
BWK-01/TNC is composed of - Goose Neck Extension (GNE) Unit length of 800 mm with TNC female connector on the top and a special Current Choke Unit (CCU) at the bottom. GNE is made of flexible metal tube covered and protected by a heatshrinkable tube and is acting also as a metal counterpoise for the end-fed type antennas. - A set of MOLLE attachment textile clips. Two of them are intended for attaching the GNE in horizontal and two of them for attaching of the GNE in vertical position. - 1 m of coaxial cable RG-223 C/U with TNC male connectors (attachment to the GNE unit and to the radio unit)
TRIVAL ANTENE d.o.o., Gorenjska c. 25, 1234 MENGES, SLOVENIA; tel. +386-1-8314-396; fax. +386-1-8313-377email: [email protected]; www.trival-antennas-mast.com
20-520 MHz50 ohm20 W CW800 mm390 g550 gMIL-STD-810G
TECHNICAL SPECIFICATIONS:Frequency rangeImpedanceMax. powerGNE lengthGNE weightBWK weightEnvironmental specs.
MOLLE attachments horizontal
MOLLE attachmentsvertical
Goose Neck Extension Unit
(GNE)
1m RG-223 cable
Date: 04.03.2020
(for attaching vertically)GNE
(for attaching horizontally)GNE
80
0 ±
5
Goose Neck Extension (GNE)
120
Ć22
Bottom connector protective cap
Standard TNC female connector
Standard TNC female connector
Upper connectorprotective cap
Flexible Goose-Neck covered with heatshrink tubing
BWK-01/TNC - WEARABLE OPERATION
MOLLE verticalattachments
MOLLE horizontalattachments
1m RG-223 coax cable
Goose Neck Extension
Radio unit
Antenna
Rigid tube
Related Documents
