ALL TAXES EXTRA. ALL PRICES F.O.B. FACTORY. LIST PRICES SHOWN IN CANADIAN DOLLARS. PRICES SUBJECT TO CHANGE WITHOUT NOTICE. WE RESERVE THE RIGHT TO CORRECT PRICING ERRORS. BERKELEY ® CENTRIFUGAL PUMPS AND ACCESSORIES CANADA 2017 LIST PRICES CB1525P_CAN • EFFECTIVE: MARCH 1, 2017 • SUPERSEDES ALL PREVIOUS PRICE LISTS
56
Embed
BERKELEY CENTRIFUGAL PUMPS AND …files.constantcontact.com/01e1a37d501/b543a32d-029f-4f72...“SSCX” Stainless Steel Centrifugal Pumps 5 “C” Single-Stage Motor Drive 7 SSHM-2
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ALL TAXES EXTRA. ALL PRICES F.O.B. FACTORY. LIST PRICES SHOWN IN CANADIAN DOLLARS.PRICES SUBJECT TO CHANGE WITHOUT NOTICE. WE RESERVE THE RIGHT TO CORRECT PRICING ERRORS.
BERKELEY® CENTRIFUGAL PUMPS AND ACCESSORIES
CANADA 2017 LIST PRICESCB1525P_CAN • EFFECTIVE: MARCH 1, 2017 • SUPERSEDES ALL PREVIOUS PRICE LISTS
2 CB1525P_CAN (03/01/17)
TABLE OF CONTENTS
Page General Information
Ordering Information 3Certified Test Charges 3Pump Model Nomemclature 4
Small Stainless Centrifugals“SSCX” Stainless Steel Centrifugal Pumps 5“C” Single-Stage Motor Drive 7SSHM-2 Horizontal Multi-Stage Pumps 7
Type “B” Closed Coupled CentrifugalsElectric Motor Drive
Type “B” Air Cooled (Gas) PumpsAir-Cooled Engine Drives – End Suction 53Air-Cooled Engine Drives – Self-Priming 53
Wastewater/Trash PumpsB-AG Series Submersible 54
AccessoriesFlange Kits and Impeller Cutting Charges 55Discharge Priming Valves 56
NEW!
CB1525P_CAN (03/01/17)3
PRODUCT AND ORDERING INFORMATION
Certified Pump TestingElectric Motor Drive Centrifugal Pumps
The following information is required with each order.1. Pump Model Number2. Motor Horsepower3. Catalog Number4. Impeller Diameter5. Required Flow Rate, Head and RPM6. Optional Flow Rate, Head and RPMCONNECTION OPENINGS – Suction and Discharge openings are NPT tapped for standard pipe, or faced and drilled per ANSI B16.1, class 125 for standard flanges as indicated. Maximum working pressure for class 30 cast iron, per ANSI B16.1, is 175 PSI unless otherwise stated on pump curve. List price for cast iron companion flanges includes threaded flange for standard pipe, gaskets, bolts and nuts, and can be found on page 55.PRICES INCLUDE – Assembed pump and motor. BASIC PUMP AND MOTOR – Pump end and bracket assembled on standard horizontal close-coupled motor.BERKELEY® reserves the right to use the motor manufacturer of its choice. Units specified (ordered) with specific motor manufacturer maybe subject to additional charges and lead times.Consult factory for TEFC motors not listed on price sheets. Part-wind start motors are available. Consult factory for delivery times.
MOTOR VOLTAGESSingle-phase motors showing both 115 and 230 volts, and three-phase motors showing both 230 and 460 volts as standard, are reconnectable for either voltage, 230 volt motors WILL NOT operate on 208 volt systems. For 208 volt systems, order 200 volt motor. **200V motors subject to additional charges.PUMP CASES – All pump cases are cast iron.BRACKETS – All brackets are cast iron.IMPELLERS – Cast iron and bronze (see price sheet). Pricing for special impeller trims is listed on page 55.SHAFT SEALS – Seal materials are ceramic carbon, Buna-N, and 300 Series stainless steel generally suitable for water to 200°F. All models ending with the letter “S” are fitted with mechanical shaft seal. Special seals may be available, consult factory. Stuffing box is standard on all other models.PACKING – Fiber-metallic packing is used in stuffing box models. For special pumping applications (liquids other than water), consult factory.WEAR RINGS – All wear rings are bronze.
SHAFT SLEEVES – All shaft sleeves are stainless steel.
SPECIAL CONSTRUCTION AND MATERIALSALL IRON – List price additions for all-iron construction include cast iron bracket, cast iron case, cast iron impeller, packing gland, cast iron wear ring (where used), stainless steel shaft sleeve, and corrosion-resistant bolts, nuts and capscrews.ACCESSORIES – Items of equipment frequently required to complete the pump installation may be ordered separately from sections of the catalog accessories.
VOLUTE ORIENTATION
HP Phase 115V 200V** 230V 460V 575V1 thru 1-1/2 1 available available standard refer to factory
2 thru 10 1 N/A available standard refer to factory1 thru 40 3 N/A available standard standard available
50 thru 200 3 N/A available available standard available
Performance TestsNet PricePart Number Description
CTEST01 Non-Witnessed Performance Test with no NPSH
$900 NET
CTEST02 Customer Witnessed Performance Test with no NPSH Test
CTEST03 Non-Witnessed Performance with 1 Point NPSH Test
CTEST04 Customer Witnessed Performance with 1 Point NPSH Test
CTEST05 Non-Witnessed Certified Hydrostatic Test
$129 NETCTEST06 Witnessed Certified Hydrostatic Test
NOTES:• Certified tests shall be factory laboratory tests conducted in accordance
with the edition of ANSI/HI 1.6 and ANSI/HI 2.6 test standards. Test will be evaluated to Level B requirements.
• If the measured performance is within -3% to +5% of the published rating point or the customer specified rating point, the pump will be shipped along with the documentation.
• The factory reserves the right to modify the impeller diameter in order to meet the published or customer specified rating point.
• Head Capacity at the pump casing discharge and amperage draw by the motor will be provided on the certified performance curve.
• Power available for testing is 230/1/60, 230/460/3/60, 600/3/60. Customer’s power requirements must match factory’s power available. Pumps will be tested at synchronous motor speed.
• All pumps are NPSH tested using vacuum tank suppression.• For certified testing of frame mount, SAE and air-cooled engine drive
pumps, please contact factory.• Pump will be shipped to location specified on Customer Purchase Order
within 24-48 hours from testing completion in Pentair Delavan Lab and receipt of customer approval of test results. Pump(s) will not be held in Lab after this period. A copy of the pump tests will be provided to the fax number on the Customer’s Purchase Order.
Viewed fromthis direction
Viewed fromthis direction
Pump with aClockwise
Rotation
Pump with aCounter-Clockwise
Rotation(Standard Option on Frame Mount)
Clo
ckw
ise
rotation
As viewed As viewed
Counter-Clockwise
12
6
39
12
6
39
RotationVolute Orientation
(viewed from driver end of pump)
Clockwise
T1 T2 (Default) T3 T4
Counterclockwise (Std. option on frame mount)
4 CB1525P_CAN (03/01/17)
TYPE “B” PUMP MODEL NOMENCLATURE
B 4 G P B H SType Of ConstructionB="Back Pull-Out" Design
Discharge Size (Inches)
Nominal Impeller Diameter (Inches)3" = A 7" = W 11" = F 15" = EX 18" = EY4" = M 8" = Y 12" = G 15.5" = XT 19" = EZ5" = X 9" = Z 13" = J 16" = ET 20" = EE6" = T 10" = E 14" = N 17" = EW
Type of DriveP = Electric Motor - Pump Attached Directly
to Motor FrameQ = Engine Drive - Pump Attached Directly
to Engine FrameR = Frame Mounted Belt or Flexible Coupling DriveRM = Special Duty Mounting Frame
Special Features (Optional)B = Hydraulically Balanced Impeller DesignK = Self-Priming
Relative Capacity of ImpellerLL = Very LowL = LowM = Medium (Often Omitted)H = HighHH = Very High
Number Of Stages (Optional)(Single stages not indicated)
Shaft Seal (Optional)S = Mechanical Seal (Packed Stuffing Box is not indicated)
Horsepower of Motor or Engine (Normally indicated on Engine Driven Pumps only)
B –
4 –G –
P –
B –
H –
2 –
S –
10 –
4" x 6" x 13" B H Discharge Size (Inches)
Suction Size (Inches)
Nominal Impeller Diameter (Inches)3" = A 7" = W 11" = F 15" = EX 18" = EY4" = M 8" = Y 12" = G 15.5" = XT 19" = EZ5" = X 9" = Z 13" = J 16" = ET 20" = EE6" = T 10" = E 14" = N 17" = EW
Special Features (Optional)B = Hydraulically Balanced Impeller Design
Relative Capacity of ImpellerLL = Very LowL = LowM = Medium (Often Omitted)H = HighHH = Very High
4" –
6" –
13"–
B –
H –
The model configurations above illustrate the complete range of closed coupled product identification numbers.
NAME PLATE EXAMPLE: PUMP SIZE EXAMPLE:
CB1525P_CAN (03/01/17)5
SMALL STAINLESS CENTRIFUGALS
Berkeley® SSCX Series
Electric Motor Drive, Noryl Impeller
Model No. HPVoltage/
Phase EnclosureSuction
SizeDischarge
SizeCatalog
No. List PriceWeight
(lbs)
SS1XN-1⁄2 1/2
115/230-1ODP
1-1/4” 1”
B78635 $847 22230/460-3 B78636 868 26115/230-1
TEFCB78647 1,088 32
230/460-3 B78648 1,106 29
SS1XN-3⁄4 3/4
115/230-1ODP
1-1/4” 1”
B78637 921 25230/460-3 B78638 946 23115/230-1
TEFCB78649 1,159 37
230/460-3 B78650 1,216 32
SS1XN-1 1
115/230-1ODP
1-1/4” 1”
B78639 1,009 27230/460-3 B78640 1,014 22115/230-1
TEFCB78651 1,220 40
230/460-3 B78652 1,337 35
SS1XN-11⁄2 1-1/2
230-1ODP
1-1/4” 1”
B78641 1,106 32230/460-3 B78642 1,143 28
230-1TEFC
B78653 1,431 50230/460-3 B78654 1,492 37
SS11⁄4XN-2 2230-1
ODP1-1/2” 1-1/4”
B78643 1,396 36230/460-3 B78644 1,304 31
230-1 TEFC B78655 1,582 52
SS11⁄4XN-2-1/2 2-1/2230-1
ODP 1-1/2” 1-1/4”B78645 1,554 37
230/460-3 B78646 1,536 33The standard seal in a SSCX series pump with a Noryl Impeller is a Buna-Carbon/Ceramic. The volute uses a Buna O-Ring to seal the pumping chambers. Use the Seal Options below to upgrade your seal selection.
Mechanical Seal Options
Seal FacesElastomers – Mechanical
Seal & Pump Volute
ODP and TEFCSS_XN Seal Adder
List PriceCarbon / Ceramic Buna IncludedCarbon / Ceramic Viton $64 Carbon / Silicon Carbide Viton 113 Silicon Carbide Viton 170
230/460-3 B82428 1,757 33The standard seal in a SSCX series pump with a Stainless Steel Impeller and ODP motor is Viton-Carbon/Ceramic. For TEFC equipped pumps a Viton-Silicon Carbide seal is included. Use the Seal Options below to upgrade your seal selection.
Mechanical Seal Options
Seal FacesElastomers – Mechanical
Seal & Pump Volute
With ODP Motor With TEFC MotorSS_XS Seal Adder
List PriceSS_XS Seal Adder
List PriceCarbon / Ceramic Viton Included N.A.Carbon / Silicon Carbide Viton $112 N.A.Silicon Carbide Viton 161 Included
N.A. = Not available
CB1525P_CAN (03/01/17)7
SMALL STAINLESS CENTRIFUGALS
Berkeley® C Series
Electric motor drive, cast iron construction, silicon bronze impeller
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
6” – Nominal Impeller Diameter
Model Number (Size) HP
RPM Shaft Seal Impeller Material
Volute Con-nection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B1-1/2TPL 3
3600 PackingCast Iron
NPT
B53747 $3,777 B51592 $3,681 105(1-1/2 x 2 x 6 L) 5 B53748 4,312 B53749 3,927 145
5 Silicon Bronze B74385 4,270 B74386 3,919 145
B1-1/2TPLS 3
3600 MechanicalCast Iron
NPT
B54493 3,454 B54497 3,324 105(1-1/2 x 2 x 6 L) 5 B54494 3,987 B54498 3,563 145
5 Silicon Bronze B74388 3,961 B74389 3,571 145
B1-1/2TPM 5
3600 Packing
Cast Iron
NPT
B58143 4,338 B58144 3,964 145(1-1/2 x 2 x 6 M) 7.5 B58145 4,962 B58146 4,174 165
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
6” – Nominal Impeller Diameter
Model Number (Size) HP
RPM Shaft Seal Impeller Material
Volute Con-nection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B2-1/2TPM 3
3600 Packing Cast Iron Flanged
B75939 3,768 B75940 3,693 105(2-1/2 x 3 x 6 M) 5 B75943 4,278 B75944 3,930 145
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
6” – Nominal Impeller Diameter
Model Number (Size) HP
RPM Shaft Seal Impeller Material
Volute Con-nection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B3TPMS 7.5
3600 Mechanical
Cast Iron NPT
B54589 4,935 B54596 4,072 175(3 x 4 x 6 M) 10 B54651 5,597 B54597 4,707 210
NPT B66871S 7,385 380(3 x 4 x 6 H) Flanged B70140S 7,385 380B3TPHS 25 3600 Mechanical Silicon
BronzeNPT B66873S 6,827 380
(3 x 4 x 6 H) Flanged B70144S 6,827 380B3TPH 3 1800 Packing Silicon
BronzeNPT B66552S 4,390 B66553S 4,136 160
(3 x 4 x 6 H) Flanged B70105S 4,407 B70139S 4,136 160B3TPHS 3 1800 Mechanical Silicon
BronzeNPT B66554S 4,097 B66555S 3,800 160
(3 x 4 x 6 H) Flanged B70108S 4,097 B70143S 3,800 160B3TPHH 20 3600 Packing Silicon
Bronze Flanged B82477 7,593 355(3 x 4 x 6HH) 25 B82475 8,132 400B3TPHHS 20 3600 Mechanical Silicon
Bronze Flanged B82478 7,593 355(3 x 4 x 6HH) 25 B82476 8,132 400
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
CB1525P_CAN (03/01/17)11
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® W Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
7” – Nominal Impeller Diameter
Model Number
(Size) HP RPM Shaft SealImpeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B1WP 33600 Packing Silicon
Bronze NPTB55567S $3,971 B53697S $3,882 110
(1 x 1-1/2 x 7) 5 B55568S 4,448 B55569S 4,140 1507.5 B58132S 5,093 B55570S 4,368 170
B1WPS 33600 Mechanical Silicon
Bronze NPTB54485S 3,522 B54486S 3,402 110
(1 x 1-1/2 x 7) 5 B54487S 4,078 B54488S 3,645 1507.5 B54489S 4,701 B54490S 3,872 170
B5WP 51800 Packing Silicon
Bronze FlangedB51920S 7,959 B51922S 7,772 265
(5 x 6 x 7) 7.5 B51921S 8,721 B51923S 8,309 30510 B51924S 8,630 330
B5WPS 51800 Mechanical Silicon
Bronze FlangedB62577S 8,818 B68315S 8,739 265
(5 x 6 x 7) 7.5 B62579S 9,604 B62580S 9,272 30510 B68316S 10,323 B62581S 9,600 330
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
12 CB1525P_CAN (03/01/17)
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® Z Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
9” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B1-1/2ZPL 7.5
3600 Packing
Cast Iron
NPT
B53750 $5,363 B53751 $4,403 175(1-1/2 x 2 x 9 L) 10 B55574 6,027 B53752 4,924 210
B1-1/2ZPHS 3 1800 Mechanical Silicon Bronze NPT B75253 3,882 B75254 3,837 159(1-1/2 x 2 x 9 H)
B2ZPL 10
3600 Packing
Cast Iron NPTB55571 6,309 B55572 5,528 220
(2 x 2-1/2 x 9 L) 15 B55573 5,944 25420 B55561 6,654 34010 Silicon
Bronze NPTB73881 6,187 B73882 5,330 215
15 B73886 5,855 22020 B73890 6,538 34010 Silicon
Bronze FlangedB74476 6,187 B74477 5,463 215
15 B74480 5,855 22020 B74483 6,538 340
B2ZPLS 10
3600 Mechanical
Cast Iron NPTB55562 5,762 B55563 4,856 215
(2 x 2-1/2 x 9 L) 15 B55564 5,278 22020 B55565 6,509 34010 Silicon
Bronze NPTB73894 5,637 B73895 4,805 215
15 B73899 5,213 22020 B73901 6,388 34010 Silicon
Bronze FlangedB74486 5,637 B74487 4,805 215
15 B74490 5,213 22020 B74492 6,388 340
B2ZPH 25 3600 Packing Cast Iron NPT B58067 7,736 415(2 x 2-1/2 x 9 H) 30 B58149 8,969 490
CB1525P_CAN (03/01/17)13
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® Z Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
9” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B2ZPHS 25
3600 Mechanical
Cast Iron NPT B58068 7,370 415(2 x 2-1/2 x 9 H) 30 B58069 8,688 490
25 Cast Iron Flanged B76253 7,063 41530 B76304 8,326 490
30 Silicon Bronze Flanged B85787 8,393 400
B2-1/2ZPL 15
3600 Packing
Cast Iron
NPT
B53800 6,216 235(2-1/2 x 3 x 9 L) 20 B51626 6,933 345
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
9” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B3ZPM 3
1800 Packing
Cast Iron NPT
B53820 4,908 B53823 4,887 180(3 x 4 x 9 M) 5 B53821 6,035 B53824 5,148 200
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
9” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B3ZPBHS 30
3600 Mechanical
Cast Iron NPT
B55543 9,431 490(3 x 4 x 9 BH) 40 B55544 10,668 555
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
18 CB1525P_CAN (03/01/17)
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® E Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
10” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B4EPBM 40
3600 Packing Cast Iron Flanged
B58786 12,848 525(4 x 5 x 10 BM) 50 B58787 14,548 590
60 B58788 15,773 67575 B58789 18,969 725
100 B58790 22,137 895125 B58791 25,918 1,225
B4EPBMS 40
3600 Mechanical
Cast Iron
Flanged
B58792 12,341 525(4 x 5 x 10 BM) 50 B58793 14,040 590
B4EPM 15 1800 Packing Cast Iron Flanged B51726 9,335 455(4 x 5 x 10 M) 20 B51727 9,941 495B4EPMS 15 1800 Mechanical Cast Iron Flanged B54154 8,858 455(4 x 5 x 10 M) 20 B54155 9,462 495B5EPBM 60
3600 Packing Silicon Bronze Flanged
B56011S 18,024 1,025(5 x 6 x 10 BM) 75 B55984S 20,688 1,165
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
20 CB1525P_CAN (03/01/17)
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® G Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
12” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B4GPBH 15
1800 Packing Silicon Bronze Flanged
B80470 $8,824 488(4 x 5 x 12 BH) 20 B80472 9,111 538
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
12” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B8GPBMS 15
1200 Mechanical Cast Iron Flanged
B54227 18,479 745(8 x 10 x 12 BM) 20 B54228 19,934 815
B56007 24,306 1,170(10 x 12 x 12 BM) 75 B56008 25,292 1,240
100 B56009 28,290 1,820125 B56010 30,795 1,895
B10GPBMS 60
1800 Mechanical Cast Iron Flanged
B62106 25,029 1,170(10 x 12 x 12 BM) 75 B62107 26,044 1,240
100 B62108 29,115 1,820125 B62109 31,682 1,895
B10GPBM 20
1200 Packing Cast Iron Flanged
B53865 24,173 820(10 x 12 x 12 BM) 25 B50611 25,212 895
30 B50612 22,826 94540 B75261 35,763 1,124
B10GPBMS 20
1200 Mechanical Cast Iron Flanged
B54234 24,936 820(10 x 12 x 12 BM) 25 B54235 26,000 895
30 B54236 29,225 94540 B75263 36,659 1,124
Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
22 CB1525P_CAN (03/01/17)
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® J Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
13” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B2-1/2JPBM 15
1800 Packing
Cast Iron
NPT
B51693 $7,870 450(2-1/2 x 4 x 13 BM) 20 B51694 8,632 500
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
13” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B4JPBH 20
1800 Packing
Cast Iron
Flanged
B58872 10,811 540(4 x 5 x 13 BH) 25 B58873 11,978 605
B4JPBHH 60 1800 Packing Cast Iron Flanged B55974 18,693 855(4 x 6 x 13 BHH)B4JPBHHS 60 1800 Mechanical Cast Iron Flanged B62036 18,110 855(4 x 6 x 13 BHH)B6JPBL 25
1800 Packing Cast Iron Flanged
B53858 12,948 670(6 x 8 x 13 BL) 30 B53859 13,616 715
40 B51759 15,545 79550 B51760 16,599 855
B6JPBLS 25
1800 Mechanical Cast Iron Flanged
B54214 12,502 670(6 x 8 x 13 BL) 30 B54215 13,172 715
40 B54216 15,062 79550 B54217 16,146 855
B6JPBM 30
1800 Packing Cast Iron Flanged
B58126 13,484 720(6 x 8 x 13 BM) 40 B56761 15,368 800
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
13” – Nominal Impeller Diameter
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B6JPBM 30
1800 Packing Silicon Bronze Flanged
B74909 14,017 720(6 x 8 x 13 BM) 40 B74913 15,829 800
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
CB1525P_CAN (03/01/17)25
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® EX Series Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
15” – Nominal Impeller Diameters
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B4EXPBL 60 1800 Packing Cast Iron Flanged B55975 $23,640 1,060(4 x 5 x 15 BL) 75 B55976 25,341 1,130B5EXPBH 100 1800 Packing Cast Iron Flanged B55988 28,805 1,265(5 x 6 x 15 BH) 125 B55989 31,386 1,475B6EXPBL 75 1800 Packing Cast Iron Flanged B55994 25,605 1,065(6 x 8 x 15 BL) 100 B55995 28,638 1,265B6EXPBLS 75 1800 Mechanical Cast Iron Flanged B68434 27,824 1,065(6 x 8 x 15 BL) 100 B68436 30,564 1,265B6EXPBH 75
1800 Packing Cast Iron Flanged
B58129 25,986 1,065(6 x 8 x 15 BH) 100 B58130 29,014 1,265
Berkeley® EY Series18” – Nominal Impeller Diameters
Model Number (Size) HP RPM Shaft Seal
Impeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number
List Price
Catalog Number
List Price
B4EYPBM 40
1800 Packing Cast Iron Flanged
B83191 16,146 965(4 x 5 x 18 BM) 50 B83195 20,411 1,025
60 B83192 23,030 1,25075 B83193 24,681 1,320
100 B83188 27,658 1,810B4EYPBMS 40
1800 Mechanical Cast Iron Flanged
B83186 18,450 965(4 x 5 x 18 BM) 50 B83187 19,473 1,025
60 B83194 22,194 1,25075 B83189 24,268 1,320
100 B83190 27,179 1,810B4EYPBH 100 1800 Packing Cast Iron Flanged B83196 26,770 1,810(4 x 5 x 18 BH) 125 B83197 29,160 1,962
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
26 CB1525P_CAN (03/01/17)
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Berkeley® Electric Motor Drive
When ordering 575 volt product, please add -575T to the 3 phase base part number (i.e. B54488S would become B54488S-575T)3-30hp 575V pumps will be provided with TEFC motors at no additional charge40 – 200hp will be subject to additional charges for TEFC motors (Please Consult Factory)
Self-Priming
Model Number
(Size) HP RPM Shaft SealImpeller Material
Volute Connection
ODP 1 Phase ODP 3 PhaseWeight (Lbs.)
Catalog Number List Price
Catalog Number List Price
B2XPKS 1-1/23600 Mechanical Cast Iron NPT
B51499 $2,355 B51502 $2,714 91(2 x 2 x 5) 2 B51500 2,536 B51503 2,890 95
3 B51501 2,915 98B3TPKS 10 3600
Mechanical Cast Iron NPT
B60767 5,764 B60768 5,234 220(3 x 3 x 6) 15 B60769 5,771 329
B4TPKLS 3 1800 Mechanical Cast Iron NPT B54629 6,011 B54630 6,149 185(4 x 4 x 6 L)B4TPKHS 5 1800 Mechanical Cast Iron NPT B54631 6,686 B54632 6,513 196(4 x 4 x 6 H)B4ZPKS 5
1800 Mechanical Cast Iron NPTB58449 6,730 B58450 6,560 370
(4 x 4 x 9) 7-1/2 B54633 7,557 B54634 7,146 35010 B54635 8,189 B54636 7,511 423
NOTE: See page 4 for model description.Three phase motors used meet premium efficiency levels (NEMA MG 1-2011, Table 12-12, 20A or 20B).
Berkeley® Electric Motor Drive
Seal Adders
RPM Range
Horsepower Range Viton EPDM
Sil-Carbide/Viton
1200 1-50 HP $71 $71 $171 1200 60-125 HP 105 105 3551800 1-50 HP 71 71 1711800 60-125 HP 105 105 3553600 5-60 HP 71 71 1713600 75-150 HP 105 105 355
Seal adders are for Berkeley® B-Line electric closed coupled pumps only. Please note, standard Berkeley Pumps are designed for pumping water only. Always check chemical compatibility charts when pumping solutions other than water.Consult factory for additional seal options and lead times.EPDM seals use standard carbon/ceramic rotating and stationary faces with 316 stainless steel compression spring. The operating temperature range is from -50° F to 300° F, EPDM seals are not compatible with petroleum products.Viton seals use standard carbon/ceramic rotating and stationary faces with 316 stainless steel compression spring. The operating temperature range is from -10° F to 400° F. Viton seals have a wider range of chemical compatibility than standard BUNA or EPDM seals.Sil-Car/Viton seals use an extremely durable silicon carbide material on both the stationary and rotating faces. Elastomers are Viton, 316 stainless compression spring. The operating temperature is from -10° F to 400° F.
CB1525P_CAN (03/01/17)27
TYPE “B” CLOSE COUPLED CENTRIFUGALS
Close Coupled Pump Motors
Note: Single phase motors are standard efficiency. Three phase motors are premium efficiency.
B4ZRKH CW Packing Cast Iron NPT B80468 6,154 195(4 x 4 x 9)NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.
Belt and Coupling Drive
Model Number
(Size)Drive Type Rotation Shaft Seal
Impeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B1MRS CouplingCCW
Mechanical
Cast Iron
NPT
B56413 $918 15(1 x 1-1/4 x 4)B1XRS Coupling B56414 918 15(1 x 1-1/4 x 5) BELT B01784 918 20B1XRMS Coupling
CW
Silicon Bronze
B56415S 810 17(1 x 1-1/4 x 5) BELT B07005S 827 B1-1/2TRLS
CouplingCast Iron B56417 1,322 37
(1-1/2 x 2 x 6 L) Silicon Bronze B74361 1,362 37
Belt
Cast Iron
B03539 1,322 35B2TRMS Coupling B56418 1,355 37(2 x 2-1/2 x 6 M) BELT B03540 1,355 40B2-1/2TRMS Coupling B56419 1,438 41(2-1/2 x 3 x 6 M) BELT B03541 1,438 42B3TRMS Coupling B56420 1,570 45(3 x 4 x 6 M) BELT B03542 1,570 50
40 CB1525P_CAN (03/01/17)
TYPE “B” FRAME MOUNT
Berkeley® Z Series
9” – Nominal Impeller Diameter
Model Number
(Size) Rotation Shaft SealImpeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B1-1/2ZRL
CWPacking
Cast Iron
NPT
B52383 $2,153 90(1-1/2 x 2 x 9 L) Silicon
Bronze B74963 2,196 80
B1-1/2ZRLS Mechanical Cast Iron B68454 2,421 80(1-1/2 x 2 x 9 L)B2ZRL
CWPacking
Cast Iron NPTB55566 2,391
90(2 x 2-1/2 x 9 L)B2ZRLS Mechanical B68410 2,651(2 x 2-1/2 x 9 L)B2ZRM
CWPacking
Cast Iron NPTB52170 2,430
90(2 x 2-1/2 x 9 M)B2ZRMS Mechanical B68411 2,705(2 x 2-1/2 x 9 M)B2-1/2ZRL
CWPacking
Cast Iron
NPT
B52385 2,835 105(2-1/2 x 3 x 9 L) Silicon
Bronze B74966 2,854 100
B2-1/2ZRLS Mechanical Cast Iron B68412 3,094 100(2-1/2 x 3 x 9 L)B2-1/2ZRM
CWPacking
Cast Iron NPTB52175 2,889 75(2-1/2 x 3 x 9 M)
B2-1/2ZRMS Mechanical B68413 3,144 100(2-1/2 x 3 x 9 M)B3ZRM¨
Mechanical B80432 5,379 (6 x 8 x 9 L) Heavy Duty FrameB6ZRL¨
CWPacking
Cast Iron FlangedB69504 4,809
190(6 x 8 x 9 L) B6ZRLS¨ Mechanical B69760 4,986 (6 x 8 x 9 L) B6ZRM¨ CCW Flange
Kit Needed. See page 53
PackingCast Iron Flanged
B66167 4,175 190(6 x 8 x 9 M)
B6ZRMS¨ Mechanical B63821 3,360 (6 x 8 x 9 M)B6ZRH
CW
Packing Cast Iron Flanged B80433 4,965
240
(6 x 8 x 9 H “HD”) Heavy Duty FrameB6ZRHS
Mechanical Cast Iron Flanged B85529 5,186 (6 x 8 x 9 H “HD”) Heavy Duty FrameB6ZRH¨
CWPacking
Cast Iron FlangedB69501 4,809 169(6 x 8 x 9 H)
B6ZRHS¨ Mechanical B69500 4,986 190(6 x 8 x 9 H)B6ZRBHH
CWPacking
Cast Iron FlangedB85717 7,606 405(6X8X9 PBHH)
B6ZRBHHS Mechanical B85718 7,952 405(6X8X9 PBHH)
42 CB1525P_CAN (03/01/17)
TYPE “B” FRAME MOUNT
Berkeley® E Series
10” – Nominal Impeller Diameter
Model Number (Size) Rotation Shaft Seal
Impeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B1-1/2ERL
CWPacking Silicon
Bronze NPTB75017 $4,126
85(1-1/2 x 2 x 10 L)B1-1/2ERLS Mechanical B60194S 4,841 (1-1/2 x 2 x 10 L)B2ERL
CW PackingCast Iron
NPTB60656 4,510
95(2 x 3 x 10 L)B2ERL Silicon
Bronze B85321 5,367 (2 x 3 x 10 L)
B2ERL CCW Packing Cast Iron NPT B60657 4,510 95(2 x 3 x 10 L)B2ERLS CW Mechanical Cast Iron NPT B60892 4,935 95(2 x 3 x 10 L)B2ERH
CWPacking
Cast Iron NPTB60658 4,510
95(2 x 3 x 10 H)B2ERHS Mechanical B61368 4,935 (2 x 3 x 10 H)B2ERBH
CWPacking
Cast Iron NPTB54345 5,576
165(2 x 3 x 10 BH)B2ERBHS Mechanical B73020 5,828 (2 x 3 x 10 BH)B2ERHH CW Packing Cast Iron NPT B55829 4,510 95(2 x 3 x 10 HH)B2ERHH CCW Packing Cast Iron NPT B55159 4,510 116(2 x 3 x 10 HH)B2ERHHS CW Mechanical Cast Iron NPT B75178 4,729 116(2 x 3 x 10 HH)B3ERBL CW Packing
Cast Iron NPT
B58063 6,183 215(3 x 4 x 10 BL) CCW B58064 6,183 180B3ERBLS CW Mechanical B73019 6,389 180(3 x 4 x 10 BL) CCW B73022 6,389 180B3ERM
CWPacking
Cast Iron NPTB55210 5,241
115(3 x 4 x 10 M)B3ERMS Mechanical B61799 5,433 (3 x 4 x 10 M)B4ERM CW Packing Cast Iron Flanged B55211 5,517 155(4 x 5 x 10 M)B4ERBM CW Packing Cast Iron Flanged B58811 6,540 225(4 x 5 x 10 BM) CCW B58810 6,540 200B4ERBMS CW Mechanical Cast Iron Flanged B73023 6,814 200(4 x 5 x 10 BM) CCW B73027 7,013 200B5ERH
CWPacking
Cast Iron FlangedB66929 8,874
340(5 x 6 x 10 H)B5ERHS Mechanical B66928 7,820 (5 x 6 x 10 H)
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required. See page 45 for ordering instructions.
CB1525P_CAN (03/01/17)43
TYPE “B” FRAME MOUNT
Berkeley® G Series
12” – Nominal Impeller Diameter
Model Number (Size) Rotation Shaft Seal
Impeller Material
Volute Connection
Catalog Number
List Price*
Weight (Lbs.)
B4GRMBH
CWPacking
Silicon Bronze Flanged
B75569 $8,849328
(4 x 6 x 12 BH)B4GRMBHS Mechanical B75570 9,336(4 x 6 x 12 BH) Dry-Run B75570D 10,553B8GRMBM CW Packing
Cast Iron Flanged
B52379 12,224 440(8 x 10 x 12 BM) CCW B52380 12,224
490B8GRMBMS CW Mechanical B66915 13,029(8 x 10 x 12 BM) CCW B66916 13,029
CW Dry-Run B66915D 14,352B10GRMBM
CW
Packing
Cast Iron Flanged
B52381 13,388 430(10 x 12 x 12 BM)B10GRMBMS Mechanical B66917 14,193 495(10 x 12 x 12 BM)
Dry-Run B66917D 15,515NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.*Berkeley Dry-Run pumps include: Mechanical Seal, Dry-Run Gland with Lip Seal, Hardened Stainless Steel Shaft Sleeve, Lubricant Reservoir & Tubing. See page 54 for Dry-Run Spare Parts Kits.See page 40 for ordering instructions.
44 CB1525P_CAN (03/01/17)
TYPE “B” FRAME MOUNT
Berkeley® J Series
13” – Nominal Impeller Diameter
Model Number (Size) Rotation Shaft Seal
Impeller Material
Volute Connection
Catalog Number
List Price*
Weight (Lbs.)
B2-1/2JRMBM
CWPacking
Cast Iron NPTB52362 $7,383 278(2-1/2 x 4 x 13 BM)
B2-1/2JRMBMS Mechanical B66925 7,869 135(2-1/2 x 4 x 13 BM)B3JRMBM CW Packing
Cast Iron NPT
B52363 7,491 265(3 x 4 x 13 BM) CCW B52364 7,491 278B3JRMBMS CW Mechanical B66924 8,373
150(3 x 4 x 13 BM) CCW B61999 7,980CW Dry-Run B66924D 9,969
B4JRMBH CW Packing
Cast Iron Flanged
B62321 8,242 312(4 x 5 x 13 BH) CCW B62323 8,242
310B4JRMBHS CW Mechanical B61050 9,130(4 x 5 x 13 BH) CCW B66923 8,873
CW Dry-Run B61050D 10,482B4JRMBHH
CWPacking
Cast Iron FlangedB62328 7,594 320(4 x 6 x 13 BHH)
B4JRMBHHS Mechanical B61657 7,869 310(4 x 6 x 13 BHH) Dry-Run B61657D 9,454B6JRMBL CW Packing
Cast Iron Flanged
B52375 8,849 390(6 x 8 x 13 BL) CCW B52376 8,849 350B6JRMBLS CW Mechanical B66919 9,723 390(6 x 8 x 13 BL)B6JRMBM CW≠ Packing
Cast Iron Flanged
B80368 9,284
390(6 x 8 x 13 BM) CCW B56775 9,504B6JRMBMS CW≠ Mechanical B80367 10,149(6 x 8 x 13 BM) CCW B66920 10,385
CW Dry-Run B80367D 11,664B6JRMBH
CWPacking
Cast Iron FlangedB58238 10,029
360(6 x 8 x 13 BH)B6JRMBHS Mechanical B75059 11,905 (6 x 8 x 13 BH)B8JRBH
*Berkeley Dry-Run pumps include: Mechanical Seal, Dry-Run Gland with Lip Seal, Hardened Stainless Steel Shaft Sleeve, Lubricant Reservoir & Tubing. See page 54 for Dry-Run Spare Parts Kits.
CB1525P_CAN (03/01/17)45
TYPE “B” FRAME MOUNT
Berkeley® EX Series
15” – Nominal Impeller Diameter
Model Number (Size) Rotation Shaft SealImpeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B6EXRBL
CW Packing Cast Iron FlangedB53962 $16,234
605(6 x 8 x 15 BL)B6EXRBH B56755 16,234 (6 x 8 x 15 BH)
NOTE: Suction and Discharge Companion Flange Kit pricing can be found on page 53, if required.¨ Model B4JRMBHH does not have a standard suction flanged connection. Requires a 6” x 10” special suction flange available through Berkeley.≠ New double volute case with splitter - Check literature for dimensional and performance information.See page 46 for ordering instructions.
Berkeley® EY Series18” – Nominal Impeller Diameter
Model Number (Size) Rotation Shaft SealImpeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B4EYRMBM
CWPacking
Cast Iron FlangedB85282 12,683 465(4 x 5 x 18 BM)
B4EYRMBMS Mechanical B85284 13,180 490(4 x 5 x 18 BM) Dry-Run B85284D 15,255B4EYRMBH
CWPacking
Cast Iron FlangedB85283 12,323
490(4 x 5 x 18 BH)B4EYRMBHS Mechanical B85285 13,564(4 x 5 x 18 BH)
Self-PrimeModel Number
(Size) Drive Type Rotation Shaft SealImpeller Material
Volute Connection
Catalog Number List Price
Weight (Lbs.)
B2XRKS Coupling
CW Mechanical Cast IronSuction-FPT Discharge-
Flange
B56562 $1,480 33
(2 x 2 x 5)V-Belt B06310 1,509 45
B3TRKS Coupling B60772 3,045 60
(3 x 3 x 6)V-Belt B60771 3,244 95
B4ZRKS¨ Coupling B82375 7,112 300(4 x 4 x 9)¨ New heavy-duty Z Frame.
Ordering InstructionsThe following information is required with each order.1. Pump Model2. Catalog Number3. Required Flow Rate, Head and RPM4. Impeller Diameter (See Cutting Charge)PRICES INCLUDEFrame-mounted pump with integral shaft and ball-bearing assembly either:1. Designed for use with a flexible coupling - or -2. Fitted with a conventional pulley for belt-drive.NOTE: Baseplate, coupling, guards, shields and other required components are not included and must be purchased separately. Refer to Tech Data 4163 for details of various drive arrangements.CONNECTION OPENINGS – Suction and discharge openings are NPT tapped for standard pipe as indicated.ROTATION – Clockwise (CW) or counter-clockwise (CCW) when looking at pulley end of shaft.
46 CB1525P_CAN (03/01/17)
TYPE “B” SAE MOUNT — FOR FLYWHEEL HOUSINGS
Berkeley® Z Series
9” – Nominal Impeller Diameter
Model Number (Size)
Shaft Seal
Impeller Material
Volute Connection
Shaft Spline
SizeShaft Ext.
SAE HSG Size
Basic Pump End Unmounted Less Flywheel Coupling
Weight (Lbs.)
Catalog Number List Price
B1-1/2ZQM
Packing Cast Iron NPT 1-3/8”-10T 2-1/2”
5 B70315 $4,326 115(1-1/2 x 2 x 9 M)B2ZQM 5 B65985 4,407 120(2 x 2-1/2 x 9 M)B2-1/2ZQM 5 B65989 4,881 130(2-1/2 x 3 x 9 M) 3” 4 B71826 4,881 130
9” - Nominal Impeller Diameter
Model Number
(Size) Shaft SealImpeller Material
Volute Connection
Shaft Spline
Size Shaft Ext.
Coupling Catalog Number
(Included)Clutch
Size
Pump Catalog
Number¨
List Price (Including
Elastomeric Coupling)
Weight (Lbs.)
B3ZQM¨
Packing Cast Iron
Flanged
1-1/2”-10T SAE 4–2-3/4” SAE 5–2-1/2”
B85398 6.5” B80831 $6,051
250(3 x 4 x 9 M) B85400 7.5” B80830 6,051 Heavy Duty Frame
Packing Cast Iron NPT 1-1/2”-10T SAE 4–2-3/4” SAE 5–2-1/2”
B85398 6.5” B80855 7,282
325(6 x 8 x 9 L) B85400 7.5” B80854 7,282 Heavy Duty Frame
B85402 8” B80857 7,282 B85404 10” B80856 7,366
B6ZQLS¨
Mechanical Cast Iron Flanged 1-1/2”-10T SAE 4–2-3/4” SAE 5–2-1/2”
B85398 6.5” B80859 7,615
325(6 x 8 x 9 L) B85400 7.5” B80858 7,615 Heavy Duty Frame
B85402 8” B80861 7,615 B85404 10” B80860 7,700
¨Pump includes a heavy duty elastomeric coupling.*“Z” series SAE pumps are dual machined to fit SAE #4 and SAE#5 engine bell housings. List prices include elastomeric coupling. Please refer to chart above for appropriate clutch size.
CB1525P_CAN (03/01/17)47
TYPE “B” SAE MOUNT — FOR FLYWHEEL HOUSINGS
Berkeley® E Series10” – Nominal Impeller Diameter
Model Number (Size)
Shaft Seal
Impeller Material
Volute Connection
Shaft Spline
Size Shaft Ext.
SAE HSG Size
Basic Pump End Unmounted Less
Flywheel CouplingWeight (Lbs.)
Catalog Number List Price
B1-1/2EQL
Packing Cast Iron
NPT
2-1/2” 5 B71848 $5,822 170(1-1/2 x 2 x 10 L)B2EQHH 2-1/2” 5 B71850 6,060 160(2 x 3 x 10 HH) 3” 4 B71849 6,060 160B3EQBL 2-1/2” 5 B71978 6,470 180(3 x 4 x 10 BL) 3” 4 B71979 6,470 180B4EQM
Flanged2-1/2” 5 B71855 7,646 200
(4 x 5 x 10 M) 4 B71981 7,327 200B5EQBH 3” 4 B71860 8,537 350(5 x 6 x 10 BH)
9” - Nominal Impeller Diameter
Model Number
(Size) Shaft SealImpeller Material
Volute Connection
Shaft Spline
Size Shaft Ext.
Coupling Catalog Number
(Included)Clutch
Size
Pump Catalog
Number¨
List Price (Including
Elastomeric Coupling)
Weight (Lbs.)
B6ZQH¨
Packing Cast Iron Flanged 1-1/2”-10T SAE 4–2-3/4” SAE 5–2-1/2”
B85398 6.5” B80863 7,282
325(6 x 8 x 9 H) B85400 7.5” B80862 7,282 Heavy Duty Frame
B85402 8” B80865 7,282 B85404 10” B80864 7,366
B6ZQHS¨
Mechanical Cast Iron Flanged 1-1/2”-10T SAE 4–2-3/4” SAE 5–2-1/2”
B85398 6.5” B80867 7,615
325(6 x 8 x 9 H) B85400 7.5” B80866 7,615 Heavy Duty Frame
B85402 8” B80869 7,615 B85404 10” B80868 7,700
¨Pump includes a heavy duty elastomeric coupling.*“Z” series SAE pumps are dual machined to fit SAE #4 and SAE#5 engine bell housings. List prices include elastomeric coupling. Please refer to chart above for appropriate clutch size.
3” 2/3 B85333 16,432 564(6 x 8 x 15.5 BH) 2 1 B85335 16,432 59415.5” TrimB6XTQBHS
Dry-Run Cast Iron Flanged 1-1/2”-10T 3”2/3 B85333D 18,122
564(6 x 8 x 15.5 BH) 1 B85335D 18,12215.5” TrimB6XTQBH
Packing Cast Iron Flanged 1-1/2”-10T 3” 2/3 B85334 16,432 560
(6 x 8 x 15.5 BH) 2 1 B85336 16,432 59014” TrimB6XTQBHS-14”
Dry-Run Cast Iron Flanged 1-1/2”-10T 3”2/3 B85334D 18,122
560(6 x 8 x 15.5 BH) 1 B85336D 18,12214” Trim
Berkeley® EY Series 18” – Nominal Impeller Diameter
Model Number (Size) Shaft Seal
Impeller Material
Volute Connection
Shaft Spline
SizeShaft Ext.
SAE HSG Size
Basic Pump End Unmounted Less
Flywheel CouplingWeight (Lbs.)
Catalog Number
List Price*
B4EYQBM
Packing Cast Iron Flanged 1-1/2”-10T 3”
4 B85288 12,780
620(4 x 5 x 18 BM) 3 B85287 12,780
2 B85292 12,780 1 B85293 12,780
B4EYQBHPacking Cast Iron Flanged 1-1/2”-10T 3”
3 B85290 12,780 620(4 x 5 x 18 BH) 2 B85289 12,780
1 B85291 12,780 B4EYQBHS Mechanical Cast Iron Flanged 1-1/2”-10T 3” 3 B85286 13,047 620(4 x 5 x 18 BH)B4EYQBHS Mechanical
Cast Iron Flanged 1-1/2”-10T 3”2 B85342 13,047
620(4 x 5 x 18 BH)Dry-Run 3 B85286D 14,739
2 B85342D 14,739 NOTE: Suction and discharge companion flange kit pricing can be found on page 53.See page 6 for model description.*Berkeley Dry-Run pumps include: Mechanical Seal, Dry-Run Gland with Lip Seal, Hardened Stainless Steel Shaft Sleeve, Lubricant Reservoir & Tubing. See page 54 for Dry-Run Spare Parts Kits.
52 CB1525P_CAN (03/01/17)
TYPE “B” SAE MOUNT — FOR FLYWHEEL HOUSINGS
Model Number
(Size) Shaft SealImpeller Material
Volute Connection
Shaft Spline
Size Shaft Ext.SAE HSG
Size
Basic Pump End Unmounted Less
Flywheel CouplingWeight (Lbs.)
Catalog Number
List Price*
B4ZQKLS
Mechancial Cast Iron NPT 1-3/8”-10T
2-1/2” 5 B69490 $8,181 320(4 x 4 x 9 L) 3” 4 B69350 8,181 320B4ZQKHS 2-1/2” 5 B66110 8,181 320(4 x 4 x 9 H) 3” 4 B68865 8,181 215
NOTE: Basic pump end includes centrifugal pump end (unmounted), with ball bearing bracket assembly for mounting on engine with standard SAE flywheel housing. Flywheel coupling is not included.
Berkeley® Z Frame Series – New Self Priming Heavy Duty
Model Number
(Size) Shaft SealImpeller Material
Volute Connection
Shaft Spline
SizeShaft Ext.
Coupling Catalog Number
(Included)Clutch
Size
Pump Catalog
Number¨
List Price (Including
Elastomeric Coupling)
Weight (Lbs.)
B4ZQKLS
Mechanical Cast Iron NPT 1-1/2”-10T
SAE 4 - 2-3/4” SAE 5 - 2-1/2”
B85398 6.5” B82381 $9,112
325
(4 x 4 x 9 L) B85400 7.5” B82380 9,112 B85402 8” B82383 9,112 B85407 10” B82382 9,153
B4ZQKHS B85398 6.5” B82377 9,112 (4 x 4 x 9 H) B85400 7.5” B82376 9,112
B85402 8” B82379 9,112 B85407 10” B82378 9,112
“Z” series SAE pumps are dual machined to fit SAE #4 and SAE#5 engine bell housings. List prices include elastomeric coupling. Please refer to chart above for appropriate clutch size. Pump includes a heavy duty elastomeric coupling.
Flywheel Couplings for SAE HousingsWide RPM Range, Elastomer Mounted Hub
NOTE: All splines are 10T. A flywheel coupling is required for the connection of pumps to engines with SAE flywheel housings. The standard flywheel couplings listed here are shown on dimension sheet 4117. Suction and Discharge companion flange kit pricing can be found on page 53.To determine “R” Rating, divide horsepower by RPM and multiply by 100.EXAMPLE: (120 ÷ 1800) x 100 = 6.66 – A coupling with an “R” Rating of 7 would be used.
CB1525P_CAN (03/01/17)53
TYPE “B” AIR-COOLED (GAS) PUMPS
Engine Drive
Model Number HPEngine
ManufacturerEngine Model
Engine Type
Engine Starter
Fuel Tank Capacity
(Gal.)Mounting
TypeCatalog Number
List Price
Weight Lbs.
End SuctionB1WQS-9 9 Robin® EX27 OHC Rewind 1.59 Base Mtd. B72133 $3,222 182B1-1/2TQMS-9 9 Robin EX27 OHC Rewind 1.59 Base Mtd. B72136 3,531 152B1-1/2TQMS-12 12 Robin EX35 OHV Electric 1.59 Base Mtd. B72599 4,267 226B1-1/2TQMS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B71146 6,149 187B1-1/2ZQLS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B71124 7,211 221B1-1/2ZQLS-18 18 Briggs & Stratton® V-Twin OHV Electric N/A Base Mtd. B70287 7,640 265B2TQMS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B70371 6,272 242B2ZQLS-18 18 Briggs & Stratton V-Twin OHV Electric N/A Base Mtd. B70368 8,252 275B2-1/2TQMS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B71685 6,554 262B3TQMS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B71123 7,245 272B3TQMS-18 18 Briggs & Stratton V-Twin OHV Electric N/A Base Mtd. B71149 7,086 285Self-PrimingB2XQKLS-4.5 4.5 Robin EX13 OHC Rewind 0.7 Roll Cage B71907 3,863 91B2XQKHS-6 6 Robin EX17 OHC Rewind 0.95 Roll Cage B71908 4,121 98B3TQKLS-9 9 Robin EX27 OHC Rewind 1.59 Base Mtd. B72139 5,865 164B3TQKLS-12 12 Robin EX35 OHV Electric 1.59 Base Mtd. B72602 7,760 282B3TQKHS-14 14 Robin EX40 OHV Electric 1.85 Base Mtd. B71543 8,859 300B4TQKLS-18 18 Briggs & Stratton V-Twin OHV Electric N/A Base Mtd. B71546 9,910 330
NOTE: On base mounted 14 HP and 18 HP units, pumps are positioned to accommodate a lawn and garden battery.Lawn & garden battery is NOT included.Battery & battery cable not included on electric start units.Fuel tank not included on 18 HP units.Optional seals available, consult factory for lead times.
Pumper and Pumper Plus Series
Model Number HPEngine
ManufacturerEngine Model
Engine Type
Engine Starter
Fuel Tank Capacity
(Gal.)Mounting
TypeCatalog Number List Price Weight Lbs.
EDP55RV 5.5 Power Pro® 5.5 OHV Rewind 0.95 Roll Cage EDP55RV 1,011 46P60R 6 Robin EX17 OHC Rewind 0.95 BaseMtd. B82932 2,031 49P60R 6 Robin EX17 OHC Rewind 0.95 Roll Cage B82933 2,734 79P90R 9 Robin EX27 OHV Rewind 1.59 BaseMtd. B82934 2,855 71P90R 9 Robin EX27 OHV Rewind 1.59 Roll Cage B82935 3,923 71
PP60R 6 Robin EX17 OHC Rewind 0.95 BaseMtd. B82936 2,305 53PP60R 6 Robin EX17 OHC Rewind 0.95 Roll Cage B82937 3,010 53PP90R 9 Robin EX27 OHV Rewind 1.59 BaseMtd. B83148 3,352 73PP90R 9 Robin EX27 OHV Rewind 1.59 Roll Cage B83149 4,466 73
54 CB1525P_CAN (03/01/17)
WASTEWATER/TRASH PUMPS
Berkeley® AG Series Vortex Pumps
Model Number
Motor Horsepower (1 PH, 230V) Voltage (1 PH only) Catalog Number List Price
SMF25NO Mercury-free switch sealed in polypropylene, float ball weight attached to 25’ 18/2 SJQW/A cord, rated 125VA @ 115VAC, ball colored green $95 3
CB1525P_CAN (03/01/17)55
ACCESSORIES
Flange Kits and Cutting Charges
Companion Flange KitsNPT tapped suction and discharge openings are for standard pipe. All models with a discharge size 3” or smaller are NPT except for the victaulic coupled B3ZRM.Flanged suction and discharge openings are faced and drilled (per ANSI B16.1, class 125) for standard flanges. Maximum working pressure for class 30 cast iron, per ANSI B16.1, is 175 PSI unless otherwise stated on pump curve. All models with a discharge size of 4” or larger are flanged except the B6Z models as noted, and model B4JRMBHH as noted.
Series Suction Size List Price Discharge Size List PriceB2TPM
B60128 2-1/2” X 7” $149 B60120 2” X 6” $136 B2ZPLB2ZPHSB2EPBL B60129 3” X 7-1/2” 189 B60120 2” X 6” 136B2EPBHH
B2-1/2TPMB60129 3” X 7-1/2” 189 B60128 2-1/2” X 7” 149B2-1/2ZPL
B2-1/2ZPMB3TPM
B74303 4” X 9” 204 B60129 3” X 7-1/2” 189
B3TPHB3ZPLB3ZPM
B3ZPBHB3EPBLB4EPM
B59875 5” X 10” 270 B59870 4” X 9” 213B4EPBMB4JPBH
B4GPBH w/o Eccentric Reducer
B59871 5” X 10” 270 B59870 4” X 9” 213B4EYPBMB4EXPBLB4EYPBH
B4GPBH with Eccentric Reducer B59872 6” X 11” 278 B59870 4” X 9” 213B4JPBHH B59876 6” X 10” 426 B59870 4” X 9” 213
B5EPH
B59877 6” X 11” 278 B59871 5” X 10” 270B5EPBMB5WP
B5EXPBHB6ZPL
B59878 8” X 13-1/2” 404 B59872 6” X 11” 278
B6ZPHB6JPBLB6JPBMB6JPBH
B6EXPBLB6EXPBHB8GPBM B59879 10” X 16” 708 B59873 8” X 13-1/2” 404
Impeller Cutting ChargesAn impeller cutting charge will be applied for non-standard trims.
Description Catalog No. List PriceImpellers 9” diameter and smaller S16104 $233 Impellers over 9” diameter S16105 280
ACCESSORIES
Part No. Description List PriceSuction Primers
S20018 Manifold Primer $684 M12186 Replacement Diaphram Kit for #7 Protek Primer 206 M14832 TS6 Tuf-Skin Hand Primer, 6” 548 M14833 TS9 Tuf-Skin Hand Primer, 9” 812 M14834 TS6-3 Replacement Handle Tuf-Skin Hand Primer 198 M14835 TS6-5 Replacement Diaphragm Tuf-Skin Hand Primer 220 M14836 TS9-9 Replacement Handle Tuf-Skin Hand Primer 218 M14837 TS9-5 Replacement Diaphragm Tuf-Skin Hand Primer 257
Discharge Priming ValvesB02352 2 x 2-1/2 1,049 B05922 2-1/2 x 3 893 B05923 3 x 4 782 B05924 4 x 4 1,064 B05925 5 x 5 1,246 B05926 6 x 6 1,269
Packing PullerS15510 Packing Puller 70
Dry-Run Spare Part Kits
Catalog No. Pump Models Description List Price
B85599 B_G, B_J, B_EY Dry-Run Gland, with Lip Seal, Hardened SS shaft sleeve, O-ring, mechanical seal $1,775
B85600 B6XT Dry-Run Gland, with Lip Seal, Hardened SS shaft sleeve, O-ring, mechanical seal 2,309
All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.