ROTARY VALVES BALL VALVES & ZONE VALVES ROTARY VALVES BALL AND ZONE VALVES Ball Valves: ■ Bronze, cast iron and stainless steel ball valves with NPT and flanged connections. ■ Range of fluid temperature rating ideal for chilled and hot water, and steam. ■ Fitted with damper type rotary actuators for easy field assembly and installation. ■ RPTFE seats allows valve to operate in high temperature applications. ■ Full, reduced, and standard port and a wide range of sizes and C v for various applications. Applications Available with spring return or non-spring return actuators, ball valves offer the solution for aggressive applications. The high close-off capabilities and stainless steel trim allow these valves to be used in low and medium pressure steam applications and those that operate with a higher media temperature. Zone Valves: ■ Designed to fit in compact areas where on/off control is required. ■ Actuator installation is a snap with an easy, one-handed removal or engagement. ■ Actuator has a synchronous and a mechanical spring for fail-safe operation. ■ Economical operation allows for low current draw and multiple valves per transformer. ■ Enhanced motion gear action reduces motor wear and provides smooth, quiet operation with no water hammer and dependable close-off. Applications For high rise and commercial applications where higher close-off is required: fin tube casing, fan coils, radiant panels and duct coils. Zone valves control the flow of hot and chilled water through coils and heat exchangers.
30
Embed
Belimo 2013 Product Guide and Price List · 11 INDUSTRIAL BALL VALVES Bronze, cast iron, brass and stainless steel ball valves with NPT and fl anged connections. Range of media temperature
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ROTARY VALVESBALL VALVES & ZONE VALVES
ROTARY VALVESBALL AND ZONE VALVES
Ball Valves:
■ Bronze, cast iron and stainless steel ball valves with NPT and
fl anged connections.
■ Range of fl uid temperature rating ideal for chilled and hot water,
and steam.
■ Fitted with damper type rotary actuators for easy fi eld assembly and
installation.
■ RPTFE seats allows valve to operate in high temperature applications.
■ Full, reduced, and standard port and a wide range of sizes and Cv for
various applications.
Applications
Available with spring return or non-spring return actuators, ball valves offer
the solution for aggressive applications. The high close-off capabilities
and stainless steel trim allow these valves to be used in low and medium
pressure steam applications and those that operate with a higher media
temperature.
Zone Valves:
■ Designed to fi t in compact areas where on/off control is required.
■ Actuator installation is a snap with an easy, one-handed removal
or engagement.
■ Actuator has a synchronous and a mechanical spring for fail-safe
operation.
■ Economical operation allows for low current draw and multiple valves
per transformer.
■ Enhanced motion gear action reduces motor wear and provides smooth,
quiet operation with no water hammer and dependable close-off.
Applications
For high rise and commercial applications where higher close-off
is required: fi n tube casing, fan coils, radiant panels and duct coils.
Zone valves control the fl ow of hot and chilled water through coils
Mode of OperationThe control valve is operated by an electronic actuatorthat responds to a standard voltage for on/off control,by a proportional VDC/4…20 mA, or 3-point controlsystem. The actuator will then move the ball of thevalve to the position dictated by the contol signal thuschanging the fl ow.
Valve Nominal Size Type Suitable Actuators
Cv Inches DN [mm] 2-way NPT 3-way NPT
2-Way Flanged
Non-Spring Return
Spring Return
Electronic Fail-Safe
1 ½ 15 B2050VS-01
LM S
erie
s
SY S
erie
s
LF S
erie
s
2 ½ 15 B2050VS-02
4 ½ 15 B2050VS-04
15 ½ 15 B2050VS-15
30 ¾ 20 B219VS
NM
Serie
s
NF
Serie
s
51 ¾ 20 B220VS
43 1 25 B224VS
AM S
erie
s
AF S
erie
s
68 1 25 B225VS
48 1¼ 32 B232VS
84 1½ 40 B239VSGM
Ser
ies
177 1½ 40 B240VS
108 2 50 B249VS
389 2 50 B250VS GK
190 2½ 65 B265VS
370 3 80 B280VS GK15 ½ 15 B2050VSS-15
NM
Serie
s LF
30 ¾ 20 B219VSS NF
43 1 25 B224VSS
AM
Serie
s
AF S
erie
s
48 1¼ 32 B232VSS
84 1½ 40 B239VSS
GM S
erie
s
108 2 50 B249VSS
190 2½ 65 B265VSS GK
370 3 80 B280VSS
6.4 ½ 15 B315L
LR S
erie
s
LFR
Serie
s
12.8 ¾ 20 B320L
11 1 25 B325L
34 1¼ 32 B332L NR
AFR
Serie
s
57 1½ 40 B340L
AR
Serie
s
87 2 50 B350L
330 2 50 B650VS
SY S
erie
s
420 2½ 65 B665VS
600 3 80 B680VS
1200 4 100 B6100VS
3300 6 150 B6150VS
9000 8 200 B6200VS
12400 10 250 B6250VS
Product FeaturesModifi ed equal percentage of fl ow for B2, B3 and B6.Modifi ed linear fl ow for B3.
Actuator Specifi cationsControl type on/off, fl oating point, proportional, 2-10 VDC multi-function technology (MFT)Manual override LM, NM, GM, AM, SY, AF, NF, GKElectrical connection 3 ft [1m] cable with ½” conduit fi tting
Valve Specifi cationsService chilled or hot water, (60% glycol), steamFlow characteristic modifi ed equal percentage (2-way), modifi ed linear (3-way)
Sizes ½” to 10”End fi tting NPT (B2...VS & B3.. L) fl anged (B6...VS)Materials Body bronze (B2..VS), stainless steel (B2..VSS), nickel plated brass (B3...L), cast iron (B6..VS) Ball stainless steel, bronze (½”) chrome plated brass (B3...L) Stem stainless steel, bronze (½”) nickel plated brass (B3...L) Seats 2-way MPTFE 3-way LPTFE Packing 2-way NPT RPTFE 2-way fl anged PTFEMedia temp range B2..VS, B6..VS -22°F to +280°F [-30°C to +138°C] B2..VSS -22°F to +298°F [-30°C to +148°C] B3...L 0°F to 250°F [-18°C to +120°C]Body pressure rating up to 2000 psig WOG 3-way 600 psi DN 15-25 (B3...L) 400 psi DN 32-50 (B3...L)Maximum inlet pressure Steam 35 psi B2..VS 50 psi B2..VSS, B6..VS Water 50 psi B3...LLeakage ANSI class VI
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN
11-2
FLOW PATTERN
Flow Direction
Open CCW
Closed CW
B to ABOpen CCW
B to AOpen CW
NOTE: B3…L are piped differently than B3 CCV Valves.
VS SERIES BALL VALVE PIPING DIAGRAMS
Assembly can be mounted horizontally or vertically for water applications. For steamapplications the valve can be mounted vertically but if mounted horizontally the valve mustbe 90° off center of the pipe. Do not install with actuator below pipe.
Typical Installation
PIPING/MOUNTING ORIENTATION
(Water application only) (Steam or water application)
NOTE:To avoid torque increase during off season shut down, or other periods of inactivity longer than 1 month- the valve should be exercised (actuator or manually driven full open-closed cycle) at least once permonth. This is necessary to avoid any application problems after an off season shut down.
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.2* Denotes tandem actuators.
Valve Specifi cationsService chilled or hot water,
60% glycol, 35# steamFlow characteristic modifi ed equal percentageAction 90° rotation valve open
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA/CARIBBEAN
11-6
Spring Return Actuators
ACTUATOR PART # LF24 US LF120 US LF24-MFT US NFB24-X1 NFX24-MFT- X1Control type On/Off On/Off Proportional/MFT On/Off Proportional/MFTManual override • •
Running timeMotor <40 to 75 seconds <40 to 75 seconds 150 seconds (default)
75 to 300 seconds <75 seconds 150 seconds (default)40 to 220 seconds
3 ft cable, ½” conduit fi tting • • • • •Valve Nominal Size
Ball ValveModel #
CvRating Inches DN
mmClose-off
psiB2…VS 2-WAY BALL VALVE WITH SPRING RETURN ACTUATORSB2050VS-01 1 ½ 15 100 $625.00 $664.00 $871.00B2050VS-02 2 ½ 15 100 $625.00 $664.00 $871.00B2050VS-04 4 ½ 15 100 $625.00 $664.00 $871.00B2050VS-15 15 ½ 15 100 $625.00 $664.00 $871.00B219VS 30 ¾ 20 400 $849.00 $1,091.00B220VS 51 ¾ 20 200 $888.00 $1,132.00
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.
B2…VS Series Ball Valve, Spring Return Actuators2-way Valve, Bronze Body, NPT Female Ends
Valve Specifi cationsService chilled or hot water,
60% glycol, 35# steamFlow characteristic modifi ed equal percentageAction 90° rotation valve open
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.2* Denotes tandem actuators.
B2…VS Series Ball Valve, Spring Return and Electronic Fail-Safe Actuators2-way Valve, Bronze Body, NPT Female Ends
Valve Specifi cationsService chilled or hot water,
60% glycol, 35# steamFlow characteristic modifi ed equal percentageAction 90° rotation valve open
Dual mounted actuators use standard run time only (no reprogramming of standard run time allowed).Specify MFT codes when ordering MFT actuators.Note: Not for use in dual temperature applications. Must be used in chilled or hot water applications only.
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators. Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.
B3…L Series Ball Valve, Spring Return Actuators3-way Valve, Nickel Plated Brass Body, NPT Female Ends
Visit www.belimo.us to see additional Spring Return options.s
Valve Specifi cationsService chilled or hot water,
60% glycolFlow characteristic modifi ed linearAction 90° rotation (B to A open
CW, B to AB open CCW)Sizes ½”, ¾”, 1”, 1¼”, 1½”, 2”End fi tting NPT female endsMaterials:
Body nickel plated brassBall chrome plated brassStem seal o-ring EPDMValve seat PTFE
B584 brass (1¼” to 3”) Gland B16 brassStem 316 stainless steelLever Nut stainless steelBody Seal PTFE brassBody B584-C84400 bronze
Pressure Rating 600 psig WOGMedia temp. range -22°F to +280°F
[-30°C to +138°C]Maximum differentialpressure (ΔP)
100 psi
Leakage ANSI class VICv rating see chart below for values
SY MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Built-in Feedback Loss of Signal Running Time List Price
MFT ACE 2-10 VDC 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACF 0.5-10 VDC 0.5-10 VDC stop ( ) actuator(s) constant No Charge MFT ACG 4-20mA 4-20mA stop actuator(s) constant ( ) No Charge MFT ACH 4-20mA 2-10 VDC stop ( ) actuator(s) constant No Charge MFT W3E 0.02-5.00 seconds PWM* 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACJ 2-10 VDC 2-10 VDC open ( ) actuator(s) constant No Charge MFT ACK 0.5-10 VDC 0.5-10 VDC open actuator(s) constant ( ) No Charge MFT ACL 4-20mA 4-20mA open ( ) actuator(s) constant No Charge MFT ACM 4-20mA 2-10 VDC open actuator(s) constant ( ) No Charge MFT ACN 2-10 VDC 2-10 VDC close ( ) actuator(s) constant No Charge MFT ACP 0.5-10 VDC 0.5-10 VDC close actuator(s) constant ( ) No Charge MFT ACR 4-20mA 4-20mA close ( ) actuator(s) constant No Charge MFT ACS 4-20mA 2-10 VDC close actuator(s) constant ( ) No Charge g
Most popular confi gurations are available at no additional cost. All other confi gurations carry a $34.00 list price.Standard delivery may vary, please consult your customer service representative for the latest lead time(s).Specify MFT codes when ordering MFT actuators.*Available only on 24-MFT actuators.
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.Dual mounted actuators use standard run time only (no reprogramming of standard run time allowed).2* Designates tandem actuators.
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.2* Designates tandem actuators.
B2…VSS Series Ball Valve, Spring Return and Electronic Fail-Safe Actuators2-way Valve, Stainless Steel Body, NPT Female Ends
Valve Specifi cationsService chilled or hot water,
60% glycol, 50# steamFlow characteristic modifi ed equal percentageAction 90° rotation valve open
CCW, valve close CWSizes ½”, ¾”, 1”, 1¼”, 1½”, 2”End fi tting NPT female endsMaterials:
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.2* Denotes tandem actuators.
B584 brass (1¼” to 3”)Gland B16 brassStem 316 stainless steelLever Nut stainless steelBody Seal PTFEBody A351-CF8M 316
stainless steelPressure rating 2000 psi WOG (½” to 1”)
1500 psi WOG (1¼” to 2”)1000 psi WOG (2 ½” to 3”)
Media temp. range -22°F to +298°F[-30°C to +148°C]
Maximum differentialpressure (ΔP)
100 psi
Leakage ANSI class VICv rating see chart below for values
SY MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Built-in Feedback Loss of Signal Running Time List Price
MFT ACE 2-10 VDC 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACF 0.5-10 VDC 0.5-10 VDC stop ( ) actuator(s) constant No Charge MFT ACG 4-20mA 4-20mA stop actuator(s) constant ( ) No Charge MFT ACH 4-20mA 2-10 VDC stop ( ) actuator(s) constant No Charge MFT W3E 0.02-5.00 seconds PWM* 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACJ 2-10 VDC 2-10 VDC open ( ) actuator(s) constant No Charge MFT ACK 0.5-10 VDC 0.5-10 VDC open actuator(s) constant ( ) No Charge MFT ACL 4-20mA 4-20mA open ( ) actuator(s) constant No Charge MFT ACM 4-20mA 2-10 VDC open actuator(s) constant ( ) No Charge MFT ACN 2-10 VDC 2-10 VDC close ( ) actuator(s) constant No Charge MFT ACP 0.5-10 VDC 0.5-10 VDC close actuator(s) constant ( ) No Charge MFT ACR 4-20mA 4-20mA close ( ) actuator(s) constant No Charge MFT ACS 4-20mA 2-10 VDC close actuator(s) constant ( ) No Charge g
Most popular confi gurations are available at no additional cost. All other confi gurations carry a $34.00 list price.Standard delivery may vary, please consult your customer service representative for the latest lead time(s).Specify MFT codes when ordering MFT actuators.*Available only on 24-MFT actuators.
Seats MPTFEPacking PTFEGland cast iron - ASTM A126
class BGasket PTFELever Nut steel - ASTM A6
Pressure rating 200 psi WOGMedia temp. range -22°F to +250°F
[-30°C to +120°C]Maximum differentialpressure (ΔP)
200 psi
Leakage ANSI class VICv rating see chart below for values
SY MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Built-in Feedback Loss of Signal Running Time List Price
MFT ACE 2-10 VDC 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACF 0.5-10 VDC 0.5-10 VDC stop ( ) actuator(s) constant No Charge MFT ACG 4-20mA 4-20mA stop actuator(s) constant ( ) No Charge MFT ACH 4-20mA 2-10 VDC stop ( ) actuator(s) constant No Charge MFT W3E 0.02-5.00 seconds PWM* 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACJ 2-10 VDC 2-10 VDC open ( ) actuator(s) constant No Charge MFT ACK 0.5-10 VDC 0.5-10 VDC open actuator(s) constant ( ) No Charge MFT ACL 4-20mA 4-20mA open ( ) actuator(s) constant No Charge MFT ACM 4-20mA 2-10 VDC open actuator(s) constant ( ) No Charge MFT ACN 2-10 VDC 2-10 VDC close ( ) actuator(s) constant No Charge MFT ACP 0.5-10 VDC 0.5-10 VDC close actuator(s) constant ( ) No Charge MFT ACR 4-20mA 4-20mA close ( ) actuator(s) constant No Charge MFT ACS 4-20mA 2-10 VDC close actuator(s) constant ( ) No Charge g
Most popular confi gurations are available at no additional cost. All other confi gurations carry a $34.00 list price.Standard delivery may vary, please consult your customer service representative for the latest lead time(s).Specify MFT codes when ordering MFT actuators.*Consult factory.
Mode of OperationThe control valve is operated by an electronic actuatorthat responds to a standard voltage for on/off control,by a proportional VDC/4…20 mA, or 3-point controlsystem. The actuator will then move the ball of thevalve to the position dictated by the contol signal thuschanging the fl ow. Product FeaturesEqual percentage of fl ow300:1 rangeabilityANSI Leakage Class IV
Actuator Specifi cationsControl type on/off, fl oating point, proportional, 2-10 VDC multi-function technology (MFT)Manual override GM, AM, SY, NF, AF, GKElectrical connection 3 ft [1m] cable with ½” conduit fi tting
Valve Specifi cationsService chilled or hot water, (60% glycol), steamFlow characteristic equal percentageSizes 1” to 6”End fi tting NPT (1” to 2”) fl anged (3” to 6”)Materials Body carbon steel Ball hardened chrome plated stainless steel Stem stainless steel Seats Tefl on Seat O-rings ALFAS Characterizing disc hardened chrome plated stainless steel O-rings ALFAS Packing spring loaded Tefl on V-ring Bushings PEEKMedia temp range 380°F max.Body pressure rating NPT ANSI 300 (1” to 2”) Flanged ANSI 150 (3” to 6”)Maximum ΔP steam 100 psiMaximum ΔP water 150 psiClose-off pressure Water 150 psi Steam 200 psiMaximum inlet pressure Steam 200 psiLeakage ANSI class IV
Assembly can be mounted horizontally or vertically for water applications. For steam applications the valve can be mounted vertically but if mounted horizontally the valve must be 90° off center of the pipe. Do not install with actuator below pipe.
B2...VB and B6...VB V Ball Control ValveGeneral Information / Typical Installation
GENERAL INFORMATION
• Carbon Steel or Stainless Steel 150/300 ANSI Rated Bodies• Equal Percentage Flow Characteristic• Dual Body rating on 1”, 1 ½” & 2” (ANSI 150/300)• ASME B16.10 Face to Face Dimensions• ANSI Class IV Shut-off• 250 PSI 400 degree rated• Field replaceable seat• Maintenance free spring loaded packing
Ideal for replacing globe valves where high close off is required.
NOTE: Industrial ball valves have serviceable components similar to globe valves, proper maintenance of these parts will ensure longer in service life for the valves. The seats of these valves will require replacement at an interval consistent with number of full cycles the valve has been operated, or as fi eld condition dictates.
NOTE: Industrial ball valves have serviceable components, proper maintenance of these parts will ensure longer in service life for the valves. The seats of these valves will require replacement at an interval consistent with number of full cycles the valve has be operated, or as fi eld condition dictates.Replacement parts can be ordered from Belimo.SY MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Built-in Feedback Loss of Signal Running Time List Price
MFT ACE 2-10 VDC 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACF 0.5-10 VDC 0.5-10 VDC stop ( ) actuator(s) constant No Charge MFT ACG 4-20mA 4-20mA stop actuator(s) constant ( ) No Charge MFT ACH 4-20mA 2-10 VDC stop ( ) actuator(s) constant No Charge MFT W3E 0.02-5.00 seconds PWM* 2-10 VDC stop actuator(s) constant ( ) No Charge MFT ACJ 2-10 VDC 2-10 VDC open ( ) actuator(s) constant No Charge MFT ACK 0.5-10 VDC 0.5-10 VDC open actuator(s) constant ( ) No Charge MFT ACL 4-20mA 4-20mA open ( ) actuator(s) constant No Charge MFT ACM 4-20mA 2-10 VDC open actuator(s) constant ( ) No Charge MFT ACN 2-10 VDC 2-10 VDC close ( ) actuator(s) constant No Charge MFT ACP 0.5-10 VDC 0.5-10 VDC close actuator(s) constant ( ) No Charge MFT ACR 4-20mA 4-20mA close ( ) actuator(s) constant No Charge MFT ACS 4-20mA 2-10 VDC close actuator(s) constant ( ) No Charge g
Most popular confi gurations are available at no additional cost. All other confi gurations carry a $34.00 list price.Standard delivery may vary, please consult your customer service representative for the latest lead time(s).Specify MFT codes when ordering MFT actuators.*Available only on 24MFT actuators.
2* Denotes tandem actuators.NOTE: Industrial ball valves have serviceable components, proper maintenance of these parts will ensure longer in service life for the valves. The seats of these valves will require replacement at an interval consistent with number of full cycles the valve has be operated, or as fi eld condition dictates.Replacement parts can be ordered from Belimo.
MULTI-FUNCTION TECHNOLOGYDescription P-CODE Control Input Running Time Built-in Feedback List Price
P-10001 A01 2-10 VDC 150 seconds 2-10 VDC No ChargeP-10002 A02 0-10 VDC 150 seconds 0-10 VDC No ChargeP-10028 A28 0-10 VDC 100 seconds 0-10 VDC No ChargeP-10063 A63 0.5-4.5 VDC 150 seconds 0.5-4.5 VDC No ChargeP-10064 A64 5.5-10 VDC 150 seconds 5.5-10 VDC No ChargeP-20002 W02 0.02-5.00 seconds PWM 150 seconds 2-10 VDC No ChargeP-20003 W03 0.10-25.5 seconds PWM 150 seconds 2-10 VDC No ChargeP-30001 F01 Floating Point 150 seconds 2-10 VDC No ChargeP-40002 J02 On/Off 150 seconds 2-10 VDC No Chargeg
Specify MFT codes when ordering MFT actuators.Note: Most popular confi gurations available at no additional cost. All other confi gurations carry a $34.00 list price.
ZIP-USB-MP USPC-Interface: Compact Unit for use with USB port and “ZK” StyleCable Adapter (ZK Cable Below Purchased Separately)
• • • • $582.00
ZK1-GENCable for Use with ZIP-USB-MP US to Connect to New Genera-tion Non-Spring Return Actuator via Diagnostic/Programming Socket
• • $102.00
ZK2-GENCable for Use with ZIP-USB-MP US to Connect with Spring andNon-Spring Return Actuators Not Equipped with Diagnostic/ Programming Socket
• • • • $47.00
ZK6-GENCable for Use with ZIP-USB-MP US to Connect to SY Actuatorvia RJII Port
• $49.00
BATTERY BACKUPNSV-SY-01Battery Backup System for SY1-SY62 Position - 110 VAC
• $4,142.00
NSV-SY-02Battery Backup System for SY1-SY6 Proportional - 120 VAC • $4,328.00
NSV-SY-11Battery Backup System for SY1-SY52 Position - 24 VAC
• $4,833.00
NSV-SY-12Battery Backup System for SY1-SY5 Proportional - 24 VAC • $4,960.00
NSV-SY-21Battery Backup System for SY1-SY62 Position - 220 VAC
• $4,770.00
NSV-SY-22Battery Backup System for SY1-SY6 Proportional - 230 VAC • $4,896.00
Valve AccessoriesBall Valves
Non-Spring Return ActuatorSpring Return
ActuatorPROGRAMMING TOOLS AM GM SY AF List Price
MFT-P USBelimo MFT Confi guration Software (V3.X)Includes: PC Tool software and MFT-LBL Kit US (interfacecables [ZIP-RS232 US and ZIP-USB-MP] not included)