This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1253 First Ave. Harvey, LA 70058Toll Free: 800-878-6111 Phone: (504) 328-6456 Fax: (504)328-6458
202 Thru-Way Park Road, Broussard, LA 70518Toll Free: 877-330-8011
Phone: (337) 330-8407 Fax: (337) 330-8408
IN 1995, Bay-Tech Equipment Rentals,
Inc. was formed to provide offshore
equipment to the commercial
diving and offshore industry. Founder, Mike
Wills, provided the base of industry experience
and management expertise to launch the company. The vision at the time was to provide relief to
customers requiring additional commercial diving support equipment during times of availability
shortfalls along the US Gulf Coast from Texas to Florida.
In 2001, as a result of the exceptional sales growth and demands from customers, Bay-Tech expanded
the business by starting a new division to compliment the rental division. Bay-Tech Industries, Inc. was
created to market quality equipment for the commercial diving industry, provide repair services and
become a distribution center for dive industry parts and equipment. The company provides a growing
range of commercial diving and offshore related equipment to customers worldwide.
Today, the company operates within a 24,000 square foot multiplex in Harvey, LA with a satellite
office in Broussard, LA. The sites offer large inventory storage capabilities and room for complex on-site
fabrication capable of designing and building standard or custom equipment for sale or rental.
Bay-Tech Equipment Rentals, Inc. and Bay-Tech Industries, Inc. has expanded over the years but has
not forgotten its roots as a struggling company. We gratefully pause to express our gratitude to the
diving companies and divers of the industry to whom much of our success is accredited.
Stay safe,
The Staff of Bay-Tech Industries, Inc.
�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Air Analysis 5Aluminum Fabrication 10Bailout and SCUBA Accessories 11Bells and Stages 14Blast Pot and Accessories 19Bottle Racks (H.P.) 20Buoys, Flags and Markers 21Burning Rigs and Accessories 22Cases �0Chambers �2Chamber Equipment �6Chamber and Saturation Equipment 55Cleaning Products 69Compressors, Bare 70Compressors, LP 71Compressors, High Pressure 78Compressor Oil 88Divers Apparel and Equipment 89Electrical 102Engines, Diesel 108Filtration 112Fittings, Adapters 114Fittings, Couplers and Nipples 117Fittings, Brass, LP 118Fittings, Brass, HP 122Fittings, Steel, Galvanized 12�Gauges, Depth 124Gauges, Pressure 128
Table of Contents
B o o k m a r k I co n With a recent version of Adobe Acrobat Reader, you will see a bookmark icon to the left of the catalog (see image at left). Click-ing on the bookmark icon will open a table of contents like the one below. That menu can be used to navigate through the catalog by clicking the text.
41253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Hand Tools 1�0Helmets (Desco, Gorski) 1�1Hose, Wire, & Rope 141Hose Reels 145Hot Water Units 147Hydraulic Units 148Hydraulic Tools and Accessories 154Hydraulic Tools, Wachs Saws 172Hydraulic Tools, Power Sheaves 174Jet Pumps 175Lift Bags 178Lighting 182Manifolds, Air and Gas 18�Pressure Washer 185Probes 187Radios and Communications 188Regulators 190Sealant and Lubricant 19�Splash Zone and Syntho Glass 194Testing, Magnetic Particle 195Testing, Ultrasonic 196Umbilicals 197Valves 200Video and Data Management 202Video Systems 206Video Systems - Parts and Repair 207Volume Tanks, Bare 214Volume Tanks, Plumbed 215Whips LP and HP 216Winch, Pneumatic 217Rentals Product Line and Rates 218Credit Card Authorization Form 22�Index 224
Table of Contents
Look for the Rental Available Tag!Rental Available!When you see the “Rental Available” tag,
refer to the back of the catalog for rates!
5202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
The Model AATS-8014 Air Analysis Test Stand is an all-in-one air analysis/verification station. The unit’s capabilities are: air quality testing, relief valve (pop-off verification), and pressure gauge accuracy verification for testing. The stand is made of aluminum which is powder-coated for durability. The stand is equipped with a 8014 compressed breathing air analysis regulator, flow meter, tube connector, 2.5” stainless steel 0-600 PSI verification gauge and a 6’ test whip. The unit is light weight and can be disassembled for transporting.
Carbon Monoxide Part Number: 8014-600SP 10 per boxCarbon Dioxide Part Number: 8014-601SP 10 per box
Oil Mist/Hydrocarbon Part Number: 8014-602SP 10 per boxRubber Connector Part Number: 8014-002
AATS-8014: Air Analysis Test Stand
Standard Unit Specifications
Replacement Tubes and Parts
Air Analysis Kit ONLY Includes: Case, Regulator & Flowmeter.8014-BAK-O2
Take oxygen readings with a Nuvair PRO O2 oxygen analyzer. (Sold Separately)PROO2Replacement Sensor: 9505
61253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
AIR ANALYSIS
Partial Pressure O2 analyzer. Same features as the EXP but displays partial pressure.EXP-PPO2Sensor: OSR-013
Oxycheq’s famous oxygen ana-lyzer. Easy to calibrate, uses long life sensor and is powered by AAA batteries.EXPSensor: OSR-013
Carbon Monoxide analyzer with alarm. Features PPM display, long life sensor and is set to activate at 10 PPM.EXP-COSensor: OSR-CO
Rechargeable, flow-through model, no sensor required. Please specify 110 VAC or 220 VAC on order.EXP-HE
For spot-checking or contin-uous monitoring. The Analox Mini-Ox sensor is one of the most widely used models in the world today.MINI-O2DIISensor: 9100-9212-2
Oxycheq Oxygen Analyzer Oxycheq PPO2 Analyzer Oxycheq CO Analyzer
Oxycheq Helium Analyzer
Analox Oxygen Analyzer
Portable oygen sensor from MSA. Uses 9V battery good for up to 1400 hours of use. MINIOX-1Sensor: 406931
MSA MiniOx I Oxygen analyzer from MSA with High/Low alarm and large display.MINIOX-3000Sensor: 406931
MSA MiniOx 3000
Analox Sub Aspida The Sub Aspida is a purpose designed compact portable gas monitor capable of detecting both car-bon dioxide and oxygen. The unit offers continuous monitoring of of partial pressure oxygen and volu-metric carbon dioxide, making it ideal for confined space entry or decompression chambers.Features:
Audio, visual and vibration alarms.Datalogging and full user maintenance through unique calibration softwareIntelligent software alerts user to maintenance requirementsAutomatic pressure correction for more accurate results
SAACAA5601B - Oxygen: 0-100% / CO2: 0-5% Unit with US 9V charger.Parts and Accessories:9300-1009K - Wall mount clip2822-008A - U.S. chargerPGA-401DK - Dual calibration adapter9100-1060RK - Replacement oxygen sensor kit
••
•
•
7202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
AIR ANALYSIS
Analox 1000 series oxygen monitors are designed and manufactured specifically for the diving industry. The Model 1000 comes standard with high and low audio and visual alarms, dual resolution, LED display, 0-1 volt signal for non-remote recording devices and screw-on type flow-through adapter.
Analox 1000 Oxygen Monitor
There are 4 sensor types available with this model:1. Analox � year disposable series, 9212 with built in temperature compensation.2. Teledyne B1 or C� disposable type which requires a separate temperature compensating module.�. The 100HYP MKIII Internal Chamber Analyzer.4. Infinite life Paramagnetic Sensor. (Cannot be placed in chamber or bell)
Sensors
Display: 4.5 digit LED displayResolution: 0.01% O2 or 0.1mbar PPO2Accuracy: +/- 1% full scale at CTP or +/-1% of reading +/-0.035% O2Power: 12-33VDC Max. Ripple 1v 12-24VAC, 110 VAC, 240VACDimensions:Panel Height: 5.25” cutout 4.41”Width: 4.75” cutout 4.01”Depth: 10.04” Weight: 4.4LBS
Specifications
SA1A01 is the base model. This includes:
High/Low Audible and Visual Alarms4.5 Digit LED Display
97-260v AC/9-��v DC 12-24v0-1 volt output
A: 0.01 to 100% O2
B: 0-2000 mBar PPO2
C: 0-2.000 Bar PPO2
1: 9205C-C3 w/12” leads and pins2: 9205B-B1 w/12” leads and pins6: 1111 Paramagnetic Panel Mount7: 1111 Paramagnetic Rack Mount8: 9212-9HG complete with sensor, back cover, 1m cable and flying lead.11: HYPMKIII 0-2 BarPPO2
12: 9212 long life sensor w/FA, hard wired inc lead and jack plug13: 9212-3 w/48” lead
9100-2001 B1 Fast Response Cell9100-2002 C� Long Life CellSA1P01X1115 1111 Paramagnetic9100-9212-2 Oxygen 9212-2 Cell (%)SA1S01NA��N001 9205C HousingSA1S01NA�2N001 9205B HousingSA1S01NA��N00148 9205C w/48” LeadSA1S01NA�2N00148 9205B w/48” Lead25��-1499 Mains Power FilterSA1PX415569 Fuse Pack0000-0181 Trim Tool
Spare Parts and Accessories
Part Number:SA1A01 ___ ___ ___ ___
A B C D A 2 P B
A: Range
B: Sensor TypeC: Mounting
D: Output Options
81253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
AIR ANALYSIS
Analox Series 5001 carbon dioxide monitors are manufactured specifically for the hyperbaric and diving industries. The 5001 sensor is an analox transducer complete with temperature and drift compensation, individually characterized in an environmental chamber for long term accuracy and reliability.
Analox 5001 Carbon Dioxide Monitor
Range: 0-10,000 PPM or 0-5,000 PPMAccuracy: +/-3% Full scale at constant temperature and pressure or +/-0-5% of full scale at CTP assuming regular calibrationStability: <25ppm CO2 in 12hr operating timeHumidity: 0-95% RHResponse: 30 sec. to 90% of readingSensor Life: InfiniteSample Flow: 0.15 liters/minMax. Pressure: 1.25 bar absoluteOutputs: 0-1vConnection: 1/4” mnpt
Dual Resolution4.5 digit LED display97-260 VAC/50-60 Hz9-��VDC, 18-�� VAC
0-1 volt output
Part Number:SA1A0� ____ ____ ____
A B C A1 CMP B
A1: 1-10,000ppm calibrated in heliumB1: 1-10,000ppm calibrated in nitrogenC1: 0.001-2% calibrated in nitrogenF1: 1-5000ppm calibrated in nitrogenG1: 1-5000ppm calibrated in helium
P: Display and Sensor sep Panel MountR: Display and Sensor sep Rack MountCMP: Display and Sensor com Panel MountCMR: Display and Sensor com Rack Mount
A: 2x SPCO Relays & 4-20 mAB: U.P.S. w/Battery Backup for display only
ASSASH7G 0-5000ppm CO2 in He Sensor5981-0454 Flowmeter for 500125��-1499 Mains Power FilterSA2A0LEAD US Power Lead2557-1268 Battery Pack
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
AIR ANALYSIS
This unit is designed to mount to a decompression chamber using any available 1/4” port. The panel includes a flow meter, regulator, and an oxygen monitor to periodically sample the chamber atmosphere. These units come installed on our international series chambers and are available in models that can monitor the inner lock or both the inner and outer lock.Inner Lock Monitor: O2/CO2SL-ASSYDual Lock Monitor: O2/CO2DL-ASSY
BTI Chamber Mounted Analyzer
LPA-20 Low Pressure Alarm
The LPA-10 Low Pressure Alarm was designed for use in noisy work areas. It uses a sensing line from the air source plumbed into the pelican case to continuously monitor the pressure. The unit is powered by a 12v lantern battery which powers a 125db alarm and will activate once a pre-set low pressure point is reached, notifying everyone in the area that a problem exists. The alarm will reset once the high point is reached again. The unit includes a power indicator light, a manual on/off switch, a 125db alarm and an oxygen fitting to plumb into the system. The LPA-10 activation and reset pressures can be customized to suit your needs.
Weight: 9 LBSDimensions: 10” L x 11” W x 7” H
We scaled the LPA-10 down to create the LPA-20 low pressure alarm specifically for mounting inside of a dive control station. The 100db alarm is small, easy to use, and its powering options make it a simple tool to have installed. When a pre-set low pressure point is reached, the supervisor is notified via audio and visual indicators. When the pressure reaches a pre-set high point, the alarm will reset. This unit runs on either a 9v battery or 12VDC. It comes mounted inside of a case with a 1/4” female pipe thread opening to mount for continuous monitoring. Like the LPA-10, the activation and reset pressure can be customized to suit your needs.
Weight: 2 LBSDimensions: 2.5” L x 8” W x 4.5” H
Nuvair Oxygen Analyzer: PROO2Carbon Dioxide Test Tubes: 8014-601SP
LPA-10 Low Pressure Alarm
Dual Lock Monitor Shown
101253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
ALUMINUM FABRICATION - MISC.
Our ladders are made from heavy gauge aluminum square tubing and round-stock. Rungs are spaced 1’ apart and each ladder includes a 8” standoff. The ladders can be custom fabricated to suit your needs.LADD12 - 12’ Aluminum LadderLADD20 - 20’ Aluminum LadderLADD24 - 24’ Aluminum Ladder
Jet Nozzles feature heavy duty 2.5” galvanized pipe fittings, or welded stainless steel fittings, 1” diameter barrels and double unions for greater flexibility. Standard unit comes with 24” barrels.JN1X24G-ASSY- Jet Nozzle, 1” x 24” barrel, galvanizedJN1X24SS-ASSY - Jet Nozzle, 1” x 24” barrel, SSJN1X24SSA-ASSY - Jet Nozzle w/air injection, 1” x 24” barrel, SS
We offer custom fabricated air-lifts for removal of mud and sand. Each lift is built with heavy walled aluminum for ease of movement and durability. Lifts come plumbed with handles and pad-eyes.AL6x10 - Aluminum Air Lift, 6” x 10’AL8x10 - Aluminum Air Lift, 8” x 10’AL8x20 - Aluminum Air Lift, 8” x 20’
We build a sonar reflector for objects that may become buried again or for marking a spot. Made of lightweight aluminum, these reflectors are assembled with stainless steel bolts and can be broken down into their component parts for easy storage. Units are 24” x 24” and are supplied with a 10’ galvanized steel pole. (Unit can also be purchased without the pole)SR24P - (With Steel Pole)SR24NP - (Without Pole)
Aluminum Ladders Jet Nozzles
Air Lifts Sonar Reflector
Galvanized Steel
Stainless Steel
Stainless Steel w/Air Injection
11202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
250 PSI rated bailout whips with your choice of stainless steel or brass quick disconnects.BW40-BS - BrassBW40-SS - Stainless
�2” bailout whips complete with brass or stainless Q.D. BW32-BS - Brass BW32-SS - Stainless
8” bailout whips complete with brass or stainless nipple.BW8-BS - BrassBW8-SS - Stainless
Tank contents gauge, 2.5”, for easy viewing of tank contents underwater.PG2226T
Bare whips, �2” and 8”. 250 PSI rated hose. BW-32 - �2” hoseBW-8 - 8” hose
200 PSI relief to save your hose and warn you of po-tential trouble in your 1st stage.AP0640
BAILOUT & ACCESSORIES
250 PSI rated 40” hose.SLP40
Attaches to HP port on the 1st stage for easy reading of contents.GA050
Genesis tank contents gauge and depth gauge combined. 2.5” gauges for easy viewing.GA201
Depth/Pressure Console
121253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Whip for use in filling up your bailout bottle from an-other HP air source. �000 PSI Rated. FW-6
6000 PSI service, not for use with HP oxygen. 1/4” FPT in x 1/4” MPT out.YVA-3010
4000 PSI service, not for use with HP oxygen. Standard scuba yoke with bleed screw, 1/4” FPT out.SA4302 Bleed Screw Replacement: 4302-20
Dust cap for any standard scuba yoke.5705-20
Makes any bottle capable of using a scuba yoke.93030-1
Genesis backup regu-lator for use in stages or standby-air.GS040
Contents gauge for bailout bottles. Not sub-mersible. 4000 PSI rated yoke with bleeder screw, dust cap and 4000 PSI dry gauge.CG4000-ASSY
BAILOUT & ACCESSORIES
Octopus Regulator HP YokeDust Cap
Line Valve Yoke Block Filling Whip
Conshelf XIV 1st stage regu-lator. Balanced diaphragm. 107700 - Balanced Reg.108195 - Rebuild Kit107455 - DIN Adapter Kit
1st Stage Regulator
Aqualung backup reg-ulator for use in bells or standby-air sources.116920
Octopus Regulator
This is the third generation of Titan regulators from Aqualung. It is a comfortable, light-weight and easy breathing regulator ideal for entry level SCUBA divers. 128500
1st & 2nd Stage Regulator Suunto tank contents gauge and 230’ depth gauge.41182
Depth/Pressure Console
Contents Gauge
1�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Clamps large enough to fit from 30 to 80 cu.ft. Stainless steel for long life with a worm gear drive.620-152
Replacement valve rated to �000 PSI with spin out din adapter for any size scuba bot-tle. VA100-30A
SCUBA Valves
BAILOUT & ACCESSORIES
Due to increased demand, we have begun stocking twin cylinder packages. These assemblies include two 80 cu.ft SCUBA cylinders, Stainless steel bands and manifold with isloator valve all mounted on our standard 7 D-ring backpack (Pg 94, item #ATL-BHBP7DCS). The valves on the tanks are modular and have inserts that can be removed. The valves will then be capable of accepting DIN style 1st stage regulators. The package also includes a DIN plug to prevent accidental gas leaks from the valve that does not have a regulator attached. TWIN80CLRA jocking strap is available for this system. Please see Pg 94.
Twin 80 SCUBA Cylinder Packages
The manifold that attaches the two SCUBA cylinders together is made up of three pieces. A left hand valve, a right hand valve, and a crossbar with isolation valve.VMX200-30N-VI - Complete ManifoldVX200R - Right Hand ValveVCOVO-N - CrossbarVX200L - Left Hand Valve
Manifold and Parts
7.25” Stainless steel bands for use with (2) 80 cu.ft cylindersSB725
Bands
Plug used to block DIN outlets.HL402
DIN Plug Stainless steel plate used to mount cylinder bands.HL801
Back Plate
Right Hand Valve
Left Hand Valve
Crossbar with Isolator Valve
DIN Plug
Back Plate
Stainless Bands
141253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
The Model BELL-48OB Diving Bell is an open bottom diving bell designed to accommodate up to two divers. The bell can hold up to four emergency gas bottles, has an innovative distressed diver platform built in, holds two divers hoses, has full communications and video capability, dome lighting, and a full bailout setup. The bell is designed to be used as a stand alone unit or in a LARS. Included with the bell is a certification plate and documentation package.
BELL-48OB: Dive Bell
48” Steel dome4 X HP bottle capacity with connectors2 X fold down seats2 X viewportsDeployable distressed diver platformFillable aluminum electrical enclosureVideo and communications connec-tions24V bell light (internal)Internal speakerInternal manifolds with 1st & 2nd stage regulatorsDual bailout whip connectionsIsolated air and pneumo valves for bellFlood valveSingle and dual point liftCable guidesTopside umbilical protectionPaintedLoad tested
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BELLS & STAGES
Our BELL-�6OB is a steel fabricated �6” Open-Bottom Dive Bell. The unit is fitted with a dual bottle rack, fold-down seat, and improved lifting eyes for diver safety. All bells are serialized and load tested. The bell is fitted with a certification plate and comes complete with a documentation package.
Gas cylindersPowder coatedDirectional finLifting slingsSpeakerViewport
••••••
Our stage is fabricated using 1/4” steel angle and is then galvanized for added durability . The unit has two pad eyes for safer lifting, dual hand-holds for the occupant and a chain to close the unit up while still allowing quick access. Heavy gauge steel grating is used in the floor for added strength and slip resistance. Our stage is designed to be lightweight and to provide years of service.
Dual pad eyesGalvanizedWrapped in expanded metal for safety
The DS-42 Two Man Dive Stage combines innovation and safety to go beyond requirements set by both local and international or-ganizations. The 42” wide by 48” long stage can accommodate two divers and their gear, including tools. A catch bar built on to the stage permits use with either of the Bay-Tech Industries, Inc. launch and recovery systems when cable guides are attached. The DS-42 is constructed using 1/4” x �” angle and is sheathed in expanded metal grating for protection of the occupants. Hand holds and equipment retaining bars are welded into both sides of the stage along with two d-rings in the upper cross-member. It features two on-board internationally color coded breathing air cylinders, as shown, complete with manifold, pressure gauge, first stage pressure regulator, bailout whip connection and 2nd stage scuba regulator. This gives each occupant two ways to access the on-board air. The cylinders are secured using cradles that are bolted into the structure of the stage. Also included is a safety bar with stainless steel latch and a foldable distressed diver platform. Because we know that one solution is not always the right one for every job, the DS-42 is designed to function with or without the cable guides. For this reason, we offer a clump weight as an option.
DS-42: Two Diver Stage
BELLS & STAGES
Replacement Inserts for Cable Guides (2 Inserts per side)P/N: 12-0034-ICG
Standard Unit Specifications
1/4” X �” angle constructionWrapped in expanded metal1950 LBS safe working load Dual emergency air cylindersDual air manifolds with bailout connection, 1st stage and 2nd stage regulatorsDistressed diver platformSafety bar with latchRemovable cable guidesCatch bar for use with BTI LARSPowder coated for durabilityLoad tested
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BELLS & STAGES
Launch and Recovery System 002
DESIGNED TO ACCOMMODATECUSTOMER SUPPLIEDBELL OR BASKET
4500 LBS safe working loadDesigned in accordance with ABS and DNV standardsADCI and IMCA compliantA-frame skid20 GPM @ 2000 PSI power requirementsMain winch capacity: 360’ of 1/2” wire ropeClump weight winch capacity: 800’ of 3/8” wire rope2 Separate physical brakes and counterbalance braking valveBuilt-in control panel with pressure gauge for a-frame and winches includes valve section for accessoriesHard stop built into boomStainless steel tubingThree part paint system
Weight & dimensions (approx.) - OverallWeight: 7800 LBSLength: 160”Width: 89”Height: 90” (in transport mode)
•••••••••
•••
••••
INCLUDES MAINTENANCE OPERATIONS
MANUALS
AN
D
The LARS-002, like many of Bay-Tech Industries, Inc. products, is revolutionary to the industry. It is a Launch and Recovery System designed and fabricated in the United States in accordance with ABS and DNV diving rules. It also meets or exceeds ADCI and IMCA compliance specifications. The unit is designed to accommodate a guide weight system and can be outfitted to handle a surface umbilical by the installation of a power sheave. Through extensive engineering and testing, it is able to resist the dynamic forces of surge and pitch of a vessel under various conditions. It is a rugged, skid mounted unit that is portable enough to be mounted on the deck of vessels, barges and production platforms while maintaining rugged functionality that the diving industry demands.
4500 LB SWLClump weight and sheave blocks with nylon sheaves and stainless pinsHard stops on overboard sideControls to operate A-frame and winches(2) Braden hydraulic winchesMain winch capacity: 325’ 0f 1/2 wire ropeClump weight winch capacity: 650’ of 3/8” wire ropeStainless steel tubingDenzo tape wrapped fittingsFully load tested Designed in accordance with ABS diving rules� Stage offshore paint
Weight & Dimensions (approx.) - OverallWeight: 9000 LBSLength: 159”Width: 77”Height: 94” (in transport mode)
••
•••••
••••
•
••••
Standard Unit Specifications
Launch and Recovery System 001
INCLUDES MAINTENANCE OPERATIONS
MANUALS
AN
D
The LARS-001 is a launch and recovery system built to be a more economical means of bell and clump-weight handling. Designed and manufactured in the United States according to ABS diving rules, it can handle the most demanding applications. The versatile unit is designed to handle a stage or bell and clump weight combination. The nylon wire sheaves use stainless steel pins to secure them in the block. These nylon sheaves are designed to minimize weight and maximize offshore durability. The a-frame features hydraulic actuation, hard stops built into the overboard side and has shipping links to secure a-frame in place during transport. It is designed to handle a 4500 LB working load and can accommodate our 48” bell.
CAN BE USED WITH EITHER A DIVE BELL OR DIVE STAGE
19202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BLAST POT & ACCESSORIES
Steel grit/sandblasting pots for use offshore. The unit is fully plumbed and ready for service. Each pot can hold 6.5 cu.ft of grit and is pressure rated to 300 PSI. The unit comes with certification tag.
For use with the blast pot and nozzle. Heavy duty 4 ply, 1 1/4” hose.HS-BHA-004
10’ heavy duty blast whip. (shown with nozzle)BWW-05
Blast Pot BPC-002
Blast Hose
Work Whip
Blast Nozzle
Standard Unit Specifications
Individual Pieces:Blast Pot Lid: BPL-003Bare Blast Pot: BP-001
Rental Available!
201253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
BOTTLE RACKS
Bay-Tech Industries
offers bottle racks to
suit most applications.
They come in 6, 12,
16, and 25* bottle
configurations. Each rack is made of
steel and is galvanized. They come
with four pad eyes for easy lifting.
These racks can be customized for
your convenience.
*25 rack configurations are horizontal
Fits most bottlesGalvanized steel frame with top4 X lifting eyesBottom lip to prevent slipping
••••
ManifoldRegulatorsBlasted and paintedPowder coatedWheels
•••••
BR6 6 Bottle Rack
BR12 12 Bottle Rack
BR16 16 Bottle Rack
BR25 25 Bottle Rack
Bottle Racks
Part Numbers
Options
Standard Unit Specifications
Our ADCI and IMCA compliant SCUBA Replacement Rack is de-
signed to use in place of SCUBA gear. Our rack consists of three �00 cu.ft cylinders rated to 2400 PSI which are
connected to two separate mani-folds to create a main and standby air source. Both air sources are controlled by Tescom regulators mounted into a convenient control panel. All plumbing is stainless braided high pressure hose includ-ing output whips. Cylinders are color coded and labeled according to their contents. The cylinders can be filled without removal, and are mounted in an engineered powder coated steel frame.
SCUBA Replacement Rack
Our SCUBA bottle rack consists
of three 1�0 cu.ft steel cylinders.
The cylinders are mounted in
an aluminum frame and are
connected via stainless steel
fittings and tubing. They are
plumbed into a control panel
where pressure and output can
be monitored and adjusted using
two Aqua Environment regulators.
The bottles are configured as two
separate sources, which creates a
main and standby and can be filled
separately.
Engineered skidTwo lifting pad eyes(�) �00 Cu.ft cylindersStainless braided hoses(2) Tescom regulatorsIMCA and ADCI compliantSeparate fill pointsColor coded and labeled cylin-ders1000 LBS - 7�”L x �1”H x �4”W
••••••••
•
Aluminum frame(�) 1�0 Cu.ft, �400 PSI cylindersStainless steel fittings and tub-ing(2) Aqua environment regula-tors(2) Output connections(2) Fill points�00LBS - �4”L x 24”W x 24”H
•••
•
•••
Standard Unit Specifications
SCUBA Bottle Rack
Standard Unit Specifications
21202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BUOYS, FLAGS, & MARKERS
Bright orange buoys with heavy duty pad-eyes for marking pipelines or underwater obstructions. Available in a wide array of colors.719205 - 9” dia. 28” Circumference719217 - 12”dia., �8” Circumference719229 - 15”dia., 47” Circumference719231 - 18”dia,. 57” Circumference719243 - 21”dia, 66” Circumference719255 - 27” dia, 85” Circumference719267 - �4” dia, 107” Circumference
9” rubber buoys for marking pipeline runs or spots on the bottom19177 - 9”dia.
50lb steel weights for an-choring buoys or downlines.WEIG01
Marking Light that is manually activated and waterproof to 500m. The strobe flashes 25 times per minute. Uses � x D-Cell Batteries and will operate approximately 175 hours @ 0oCMF1112Replacement Electronics and Light: 92553
Heavy duty nylon flag for diver safety.DIVER23 (2’ x 3’)DIVER35 (3’ x 5’)
Heavy duty nylon flag for diver safety.ALPHA23 (2’ x 3’)ALPHA35 (3’ x 5’)
6” White marking buoy.6-STY - 6”dia.
For designation or dis-play.American23 (2’ x 3’)American35 (3’ x 5’)
Waterproof Marking Light/Strobe
Odom WeightsStyrofoam Buoy
Norwegian Buoys
Ski Buoy - Yellow
SCUBA FlagAlpha FlagU.S. Flag
221253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Cleaned for oxygen serviceBrass head and valveHigh strength plastic bodyHeight: 9” (w/o cable)Width: 2”Length: 5 3/8” (front to back)Approximate weight: 5 LBS
•••••••
Standard Unit Specifications
BTI Torch
The BT Torch Head, engineered by Bay-Tech Industries, Inc, sets a new standard for safety and ergonomics in an underwater cutting rod holder. After a long period of research and development, we are proud to introduce the most robust and innovative torch ever designed for the diving industry.
Unique Thermal Shut-Off Valve and Spark Arrestor built into the head for
added safety.
Custom designed Oxygen Control Valve for maximum Oxygen flow.
Stress reduction points in the reinforced torch body to take the
strain off integral parts.
Upper portion of torch body vented to prevent gas build up in void areas.
BURNING RIGS & ACCESSORIES - TORCH HEAD
8A 8B 8J8I
8H
8G
8F
8E
8D
8C
1
27-30
6
31
7
12
11
10
5
4
98
131516
17
18
19
20
2122
23
24
2526
14
1
3
2
Loc. Part Number
Description
1 BT-001 Handle Assembly
2 BT-002 Screw, Brass, 1” (2)
� BT-00� Screw, Brass, 1 1/4”
4 BT-004 Screw, Brass, 1 1/2”
5 BT-005 Nut, Brass (4)
6 BT-006 Collet Nut, Tightening
7 BT-007 Washer, Collet Nut
8 BT-008 Torch Head Assembly
9 BT-009 Set Screw, Torch Head
10 BT-010 Crimp Stud, Copper
11 BT-011 Shrink Tubing
12 BT-012 Cable Assembly
1� BT-01� Coupler, Valve
14 BT-014 Valve Assembly, Complete
15 BT-015 Valve Plunger Assembly
16 BT-016 Valve Body
17 BT-017 Adapter, Oxygen
18 BT-018 Lever
19 BT-019 Valve Cartridge Nut
20 BT-020 Washer, Cartridge Nut, Copper
21 BT-021 O-Ring, Valve Plunger
22 BT-022 Washer, Valve Seat
2� BT-02� Plunger, Valve
24 BT-024 Spring, Plunger
25 BT-025 Screw, Lever
26 BT-026 Nut, Lever
27 BT-027 Collet, �/8” w/Washer
28 BT-028 Collet, 5/16” w/Washer
29 BT-029 Collet, 1/4” w/Washer
�0 BT-0�0 Collet, 5/�2 w/Washer
�1 BT-0�1 Washer, Collet
Not Shown
BT-SPK Spare Parts Kit Torch Head /Thermal Shut-Off Assembly
Loc. Part Number
Description
8A BT-008A Inlet Body
8B BT-008B Filter
8C BT-008C Solder Pin Assembly
8D BT-008D O-Ring for Thermal Shut Off
8E BT-008E Thermal Shut Off Assembly
8F BT-008F Spring
8G BT-008G Spring
8H BT-008H Non-Return Valve
8I BT-008I O-Ring, Outlet Body
8J BT-008J Outlet Body
2�
BT-16, 18, 19, 20, 21, 22, 23, 24, 25, 26
BT-014Valve Assembly
Includes:
BT-10, 11, 12
BT-012Cable Assembly
Includes:
BT-20, 21, 22, 23, 24
BT-015Valve Plunger Assembly
Includes:
BURNING RIGS & ACCESSORIES - TORCH HEAD
202 Thru-Way Park RoadBroussard, LA 70518
Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
2�
241253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
BURNING RIGS & ACCESSORIES - TORCH HEAD
Location Part Number
Description
1 200-001 Handle Assembly, 2pcs.
2 200-002 Nut, Collet Tightening
� 200-00� Torch Head Brass
�-A 201-00� Torch Head and Cable
4 201-004 Valve Assembly
5 201-005 Bonnet and Stem Assembly
6 201-006 Hose Coupler Assembly
7 200-007 Gasket Valve, Copper
8 200-008 Spring, Valve Stem
9 201-009 Screw and Locknut, Lever
10 201-010 Cable Assembly
11 200-011 Nut, Nylon (Set of 4)
12 200-012 Screw, Nylon (Set of 4)
1� 200-01� Lever, Stainless Steel, Valve
14 200-014 Bonnet Nut, Valve
15 200-015 O-Ring, Valve Stem
16 200-016 Washer, Valve Seat
17 200-017 Valve Stem
18 200-018 Adapter, Brass, Oxygen
19 200-019 Washer, Collet Nut
20 200-120 Collet, �/8” w/Washer
20 200-220 Collet 5/16” w/Washer
20 200-�20 Collet 1/4” w/Washer
20 200-420 Collet 5/�2” w/Washer
21 200-021 Washer, Collet
22 200-022 Retainer, Flash Arrestor
22B AT-107 Retainer
2� 200-02� Flash Filter, Sintered
2�B AT-108 Flash Screen
Not Shown SPK-ATC Complete Spare Parts Kit
Not Shown SPK-C-ASSY Complete Spare Parts Kit
The Aqua-Thermic cutting torch is one of the most widely used cutting heads in the world today. It’s unique design allows it to save up to 20% on Oxygen usage, stops side-tube blowout, allows for smoother cuts, has a longer service life and uses 30% lower amperage settings. The Aqua-Ther-mic has been used in the Gulf of Mexico, by the U.S. Navy, and throughout the world.
Aqua-Thermic Torch
25202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BURNING RIGS & ACCESSORIES - BAR HOLDER
The Oxylance Thermic Torch is a self consuming exothermic cutting tool that can be used for a variety of applications in may different industries such as, construction, demolition, heavy equipment repair, mining, steel mills, and foundries.
Thermic torches offer many advantages over standard oxy-fuel torches. Becaue the thermic torch is an exothermic reaction, it can burn in conditions that an oxy-fuel torch can not. Thermic torches can operate while being sprayed with water, they can be submerged under water or mud and will cut metals that are covered with rust, corrosion and even concrete.
Oxylance Thermic Torch
Location Part Number
Description
1 LAP2-1 #2 LA Body
2 LAP2�-2 #2 LA Lever Handle
� LAP2�-� #2 LA Inner Link
4 LAP2�4-4 Link Bolt
5 LAP2�4-5 Link Bolt Nut
6 LAP2�5-6 2 Hinge Pin
7 LAP2-7 #2 Barrel Nut
8 LAP2-8 #2 Barrel
9 LAP2�4-9 Barrel Nut Bolt
Not Shown LAP2-10 #2 Hand Shield and Shield Nuts
11 LA26751 Rubber Grommet for LA267FB-C holder
12 OXY0002 1/2” Thermal Shut off
Not Shown FTHW-C-�2 1/2” NPT x CGA “C” Fitting
Thermal Shut Off
12
�
5
4
7
8
9
6
Rubber Grommet
11
12
Burning Bar Holder for 5/8” Bars:
LA267FB-C (Includes 1/2” Thermal Shut off )
Other holders are available, please call for information.
3/8” hose is available but might impair the oxygen flow which may cause the bar to burn improperly.
261253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Our burning rigs are built to last. Heavy duty 2/0 cable, Gates hose, Aqua-Thermic torch head, all brass lugs and bolts. Rigs are built to your specifications so call us and discuss how you would like yours constructed.
BURNING RIGS & ACCESSORIES
2/0 CableGates HoseReusable Oxygen Fittings Length as Per Customer RequestAquathermic Torch Head
For connecting cable lugs. From left to right:BH5000-001 - Brass bolt,1/2”NH5000-004 - Brass nut, 1/2”BW1/2BS - Brass washer,1/2”
High flowing 10,000 SCFH regulator for oxygen.OXY-5-500
�00 AMP rated spring actuated grounding clamp. GC300
Cable SpliceOxygen Regulator
Knife SwitchGround Clamp 600Ground Clamp 300
Standard Unit Specifications
Burning Rig
Nuts and BoltsLug - 2/0
400 AMP, dual throw knife switch with locking clasp and 90 degree stop.A1109
Knife Switch Dual Throw
27202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BURNING RIGS & ACCESSORIES - RODS
Oxylance manufactures underwater cutting electrodes in an Exothemic design, the Aqua EXO, and Tubular Steel Aqua-lance. The Aqua EXO will burn without power after it is ignited. The Aqualance is an Oxy Arc rod that requires �00 amps of electricity to maintain the arc. All of the rods have a proprietary plating process that prevents the exterior of the rod from corrosion. Oxylance uses a continuous heat shrink process for insulation that will not un-wrap or become brittle in cold water. The rods can be used in other manufacturer’s holders.
�7BAQUAEXO �/8” X 18” Exothermic Cutting Rod (50 per box)�1EAQUALANCE 5/16” X 16” Tubular Steel Cutting Rod (50 per box)UNDTA22�8 �/8” ColletUNDTA22516 5/16” Collet
Oxylance manufactures a variety of Underwater Welding electrodes for carbon steel as well as stainless steel. All of the electrodes meet or exceed the requirements of ANSI/AWS D3.6 Specification for Underwater Welding. Oxylance is the sole source provider of Nickel Wet Welding Electrodes for the US Navy.
Oxylance manufactures thermic torches in a variety of diameters so the operator can size the torch according to the material to be cut. Thermic torches can be used in steel mills and foundries for cleaning up spills, cutting up slag, removing solidified material from vessels, ladles and molds. They can also be used for removing risers from castings, cutting up skulls, repairing slag pots, and scrap processing. Thermic torches can be used for heavy equipment repairs such as removing frozen pins from paper mill rolls, hinge pins from draw bridges and tunnel boring machines. Removing frozen pins is a common procedure for burning bars. When the pin is pierced, it is heated from the inside and the resulting hole allows room for the pin to shrink.
Burning Bars - Oxylance
Part# 62B1050-A - .625 OD (5/8”) x 10’ 6” - Plain EndCustom Rods are available for special jobs. Please see below.
Part# 62B0525-A - .625 OD (5/8”) x 5’ 3” - Plain EndMore sizes are available for different burning bar holders. Please call for information.
BURNING RIGS & ACCESSORIES - RODS
29202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
BURNING RIGS & ACCESSORIES - OXYLANCE
The Oxylance OXY-5-500 regulator was designed specifically for 1/2” hose and high flow requirements. This single stage regulator has a 1/2” NPT port on the output side so it can be used with 1/2” or 3/4” hose without the flor restriction of a standard regulator with 1/4” NPT output. From a high pressure cylinder this regulator will flow in excess of 10,000 SCFH. From a high pressure liquid system with external vaporizer, this regulator will flow in excess of 7,500 SCFH. OXY-5-500
The new U/W 400, 400 amp welding stinger can be used in either wet or dry hyperbaric environments. The twist lock design makes it easy to use and simple to maintain. All components are brass or heat-treated and hardened stainless steel. OXY-STGR-400
Burning Regulator - Oxylance
Welding Stinger - Oxylance
10,000 SCFH FLOW RATE WITH OXYGEN
7,500 SCFH FLOW WITH LIQUID OXYGEN
(WITH EXTERNAL VAPORIZER)
INCLUDES CGA-540 INLET AND 1/4” OUTLET
•
•
•
Part Number Description
UW400 01477 Brass Head Member
UW400 01472 Head Insulator
UW400 01481 Pressure Pin
UW400 014825 Brass Body
UW400 01484 Handle
UW400 11/16 Grommet Rubber Grommet 11/16”
UW400 9/16 Grommet Rubber Grommet 9/16”
UW400 Cable Guard Cable Guard
UW400 01485 Stainless Steel Screw
UW400 1MPC 10 1/2x20 Stainless Steel Screw
.800 Heat Shrink Heat Shrink
UW400 L-12 Welding Lug Welding Lead Lug
�01253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
MICRO CASES: 1010-1060
Cub
e C
ases
: 034
0-03
70
Regu
lar C
ases
: 112
0-17
50
Pelican™ cases are made from an impact resistant plastic for maximum strength and durability. Used by Govern-ments, Military, adventure enthusiasts and regular people around the world, these cases are ideal in any storage capacity. Carrying sensitive electronics, packing a survival kit or just keeping your cellphone dry, Pelican™ has a case for every need. Each case has an Unconditional Lifetime Guarantee to back up their toughness. This guarantee is void only if the Pelican™ product has been abused beyond normal and sensible wear and tear. The guarantee does not cover shark bite, bear attack and children under five.
Please see “Pelican™ Case Specifications” on next page to choose the case that is right for you.
CASES, PELICAN
�1202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Cas
eW
eigh
t w/ F
oam
Wei
ght w
/o F
oam
Inte
rnal
Dim
ensi
ons
(in)
Exte
rnal
Dim
ensi
ons
(in)
Dep
th (i
n.)
Col
ors
Avai
labl
eL
WH
LW
HLi
dC
ase
Bla
ckSi
lver
Ora
nge
Yello
w
1010
-.4
04
7/16
2 15
/16
1 11
/16
5 7/
164
1/16
2 7/
64B
Y
1020
-.5
05
�/8
� 5/
81
11/1
66
�/8
4 �/
42
7/64
BY
10�0
-.5
46
1/2
2 �/
42
1/16
7 1/
2�
7/8
2 7/
16B
Y
1040
-.6
86
9/16
� 15
/16
1 �/
47
17/�
25
5/64
2 5/
�2B
Y
1050
-.8
46
9/16
� 15
/16
2 �/
47
17/�
25
5/64
� 1/
8B
Y
1060
-.9
88
7/16
4 7/
162
1/4
9 1�
/�2
5 5/
642
5/8
BY
1120
1.24
1.17
7 �/
84
7/8
� 1/
168
1/4
6 9/
16�
9/16
1/2
2 9/
16B
SO
Y
1150
1.98
1.76
8 �/
85
7/8
� 11
/16
9 1/
47
9/16
4 �/
8�/
42
15/1
6B
SO
Y
1200
2.87
2.65
9 �/
87
1/4
4 1/
810
5/8
9 11
/16
4 7/
81
�/16
2 15
/16
BS
OY
1�00
�.5�
�.09
9 �/
87
1/4
6 1/
810
5/8
9 11
/16
6 7/
81
�/16
4 15
/16
BS
OY
1400
4.40
�.90
129
1/16
5 �/
161�
�/8
11 5
/86
1 �/
164
BS
OY
1420
-�.
781�
510
158
1/2
10 1
/21
9B
1450
6.40
5.60
14 1
�/16
10 �
/86
161�
6 7/
81
�/4
4 1/
4B
SO
Y
1470
5.45
�.80
15 �
/410
9/1
6�
�/4
16 1
1/16
1� 1
/16
4 �/
81
�/8
2 �/
8B
1470
NF
-�.
8015
�/4
10 9
/16
� �/
416
11/
161�
1/1
64
�/8
1 �/
82
�/8
B
1490
6.55
5.20
17 7
/811
1/2
4 1/
819
7/1
61�
15/
164
11/1
61
1/2
2 5/
8B
1490
NF
-5.
2017
7/8
11 1
/2
4 1/
819
7/1
61�
15/
164
11/1
61
1/2
2 5/
8B
1490
CC
I7.
20-
17 7
/811
1/2
4 1/
819
7/1
61�
15/
164
11/1
61
1/2
2 5/
8B
1490
AC
7.10
-17
7/8
11 1
/24
1/8
19 7
/16
1� 1
5/16
4 11
/16
1 1/
22
5/8
B
1490
CC
26.
55-
17 7
/811
1/2
4 1/
819
7/1
61�
15/
164
11/1
61
1/2
2 5/
8B
1500
7.10
6.50
1711
7/1
66
1/8
18 1
/214
1/1
66
15/1
61
1�/1
64
5/16
BS
OY
1510
**-
-20
.211
.47.
522
149
B
1520
8.60
8.00
17 7
/812
�/4
6 �/
419
1/8
15 7
/16
7 9/
161
1�/1
64
15/1
6B
SO
Y
1550
11.9
010
.50
18 1
5/16
14 7
/16
7 �/
420
11/
1617
�/1
68
9/16
1 1�
/16
5 15
/16
BS
OY
1600
14.0
01�
.00
21 �
/416
1�/
167
7/8
24 1
/419
7/1
68
11/1
61
�/4
6 1/
8B
SO
Y
1610
**2�
.25
20.0
022
�/1
617
1/8
10 9
/16
24 9
/16
19 5
/16
11 1
5/16
2 1/
168
1/2
B
1620
**26
.10
24.5
022
1/1
617
12 9
/16
24 1
�/16
19 �
/81�
7/8
2 1/
1610
1/2
B
1650
**�0
.�5
29.4
029
17 7
/810
1/2
�2 1
/220
1/2
11 5
/16
1 7/
88
5/8
B
1660
**49
.00
�4.0
029
1/8
2017
5/8
�12�
19�
1/2
14 1
/8B
1700
**17
.00
16.0
0�5
�/4
1� 1
�/16
5 1/
4�8
1/8
17 1
�/16
6 1/
81
�/4
� 1/
2B
1720
**19
.10
16.8
042
1� 1
/25
5/16
44 �
/816
6.12
1.79
�.54
B
1750
**25
.60
2�.5
050
1/2
1� 7
/16
5 1/
45�
17 7
/16
6 1/
161
�/4
� 1/
2B
0�40
29.7
624
1818
1820
.50
20.5
019
.25
4.00
12.5
0B
0�50
�2.0
125
.99
2020
2022
.50
22.4
�21
.25
515
B
0�70
41�1
.97
2424
2426
.50
26.5
025
.25
4.5
18.0
0B
CASES, PELICAN
�21253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBERS
2 X �0” Manways with door dogs4 X 8” View portsStainless steel penetratorsHeavy duty skid with multiple fork-lift slotsDual lifting eyesBlasted and paintedPowder-coated aluminum deck platesPowder-coated aluminum phone bracketsPowder coated aluminum canopyChamber mattress with fire resistant foam and coverStainless steel inlet pressure gauge� X sound powered phones2 X paging speakersAir silencers in/out2 X Main air inlets2 X Oxygen inlets with gaugeOverboard dump valve (inner lock)Check valveRelief valveCrossover valveFlange for supply lock
Our Double-Lock Decompression Chambers are constructed and outfitted in accordance with ASME PVHO-1, OSHA, USCG and the ADCI safety standards for commercial diving operations. The chambers are also available to meet other regulating agencies at the customers request. A variety of sizes are available. There are also a number of options available including supply lock, left-hand doorways and additional penetrators and brackets. All chambers come standard with dual communications, dual air inlets, dual oxygen inlets and
are fitted with a safety relief valve and aluminum canopy with safety hinges. The inner lock is also plumbed for overboard dump masks. All vessels come complete with a certification package for your records as well as a certification pouch located under the canopy for job site documentation.
Innovative new doors
��202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Specifications and Features
CHAMBERS
Stainless steel view port forgings and door rings are available upon request.
Our Double-Lock Decompression Chamber is outfitted to meet ADCI, USCG, IMCA, USACE, and OSHA standards. All of our chambers are constructed in accordance with ASME PVHO-1 standards. This 60” DDC has had several improvements over a standard plumbed 60”DDC. It maintains the same viewport and over all height as a standard 54” DDC. The skid has been redesigned to be heavier duty while allowing for optimal loading by having
multiple forklift slots. We also redesigned the plumbing using superior quality parts which allows for a safer and easier controlled environment. The door locking system has been improved from a standard door dog to a handle that doesn’t have to be removed during operation. Finally, the inner door has been offset to allow for easier entry with the installed bunk.
2 x �0” Manways with door dogs4 x 8” View portsStainless steel penetratorsHeavy-duty skid with multiple fork-lift SlotsDual lifting eyesBlasted and paintedPowder coated aluminum deck platesPowder coated aluminum phone bracketsPowder coated aluminum canopy2 x �00 FSW pneumo gauges1 x Therapeutic pneumo gauge (in-ner lock) Caisson gaugeCarbon dioxide scrubberOxygen/carbon dioxide monitoring systemChamber mattress with fire resis-tant foam and coverPowder-coated aluminum bunkStainless steel supply lock w/powder-coated trayPneumatic safety interlock
••••
•••
•
•••
•••
•
••
•
Manual safety interlockStainless steel inlet pressure gaugeFire blanketFire extinguisherLightsPower supply (115 VAC)� x Sound powered phones2 x Paging speakersAir Silencers in/out2 x Main air inlets2 x Oxygen inlets with gaugeOverboard dump valves (inner lock and outer lock)Check valvesRelief valves (inner/outer locks)Crossover valve
••
••••••••••
•••
�41253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBERS, CUSTOM
We are capable of manufacturing completely custom-built chambers to suit just about any need. From 48” Single and Double-Lock Chambers,
to complete containerized units that are ready to be put to work.
80” Decompression Chamber22’ Over-All LengthMaximum Working Pressure: 90 PSIDouble LockSeating, Main-Lock: 4 Seats, 1 BunkSeating, Entry-Lock: 2 SeatsSupply LockCCTV System with MonitorsDVD/RGas Sampling SystemFull Communications SystemFire Suppression System (Internal and External on both Outer and Inner Locks)Control ConsoleBattery Backups
••••••••••••
••
Control Console FSS Tanks and Skid
80” Chamber Specifications
60” Decompression Chamber12’ Over-All LengthMaximum Working Pressure: 135 PSIDouble LockSeating, Main-Lock: up to 4 seatsSeating, Entry-Lock: 1 SeatSupply LockCCTV System with MonitorsComputer Chamber Interface (page �4)Gas Sampling SystemFull Communications SystemFire Suppression System (Internal and External on both Outer and Inner Locks)Control Console Mounted on ChamberBattery Backup
••••••••••••
••
60” Chamber Specifications
FSS Tanks and Skid
Custom Console, Mounted
�5202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBERS, CUSTOM
8’ x 20’ DNV Approved Container60” International Compliant Double-Lock Decompres-sion Chamber Heavy Duty Chamber Mounting SystemRemovable Sub-Wall for Chamber Maintenance 2 - Marine Grade Aluminum DoorsMinWool Insulation Air Conditioning UnitMarine Grade Light FixturesEmergency Lighting220 VAC and 480 VAC Power Diver Entrance Outside of Container120 VAC and 220 VAC Outlets
••
••••••••••
Containerized 60” Decompression Chamber
Tungum and Brass PlumbingAll Dumps Vent OutsideAll Inlets Connected OutsideAll Plumbing Installed Inside of TraysPressure TestedBuilt-In DeskLifting Slings
•••••••
For Specifications, please see 54” and 60” Double Lock
Decompression Chambers on Pages 32 & 33
�61253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
Our patent pending stainless steel supply lock is available! It incor-porates all of the same features as the previous supply lock but we reduced its size and maximized corrosion resistance. New features in-clude complete stainless steel construction, non-galling cladding on the locking teeth, single locking lever which gives greater leverage for opening/closing and space-saving design for tight installations. The supply lock will fit existing flanges on all Bay-Tech Industries cham-bers and uses the same adjustable inner door strap assembly.LW-SLLP12-SS - Supply Lock, Low Profile
Supply Lock
Features
Safety Interlock (Manual)
Outer Door Assembly
Stainless steel constructionReduced size Dual safety interlocksO-ring seals on inner and outer doorsInner door sold separately
••••
•
Safety Interlock (Automatic) Safety Interlock (Automatic): This interlock will activate as soon as pressure is applied to the supply lock and will not re-lease until pressure is vented via the manual safety interlock, pre-venting the door from opening under pressure.
Safety Interlock (Manual): The manual interlock is one of the key locking mechanisms of this unit. The lever assembly not only closes a valve, but provides another lock for the outer door. The manual interlock will release air pressure inside of the unit, al-lowing the automatic safety in-terlock device to release.
�7202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Supply Lock, Inner Door
12” Nominal pipe size (12-�/4” O.D. x 6-5/8” length) - (5-3/4” Internal projection)0.688 wall thickness (door sealing sur-face: .6275)11-�/8” I.D. (machined to 11-1/2” I.D. at the sealing surface)
•
•
•
Nozzle Specifications
CHAMBER EQUIPMENT
Do not attempt to modify your chamber from specifications on this page. Please call for more information.
12-¾”11-½”
6-5/8"
5-¾”
.625"
.688"
11-3/8"
O-Ring SealSealing Surface
Hinge Secondary Equalization Valve
Spring Clasp
Fully Adjustable Door Strap
Bay-Tech uses a nozzle that is 6-5/8” long. This size only allows use on a 54” or 60” chamber with a .375 wall thickness.
Our patent pending stainless steel inner door assembly usesan adjustable strap which fits securely on the internal projection of the nozzle of any Bay-Tech Chamber. The assembly is fully adjustable to ensure a complete seal and can be mounted to allow the door to swing from either direction. The spring loaded latch holds the door during transportation and pressurization. Unlike swing bolt inner doors which can hold pressure in the supply lock as a chamber pressure drops, our patented latch automatically vents supply lock pressure as chamber pressure is reduced. The door is fitted with a secondary equalization valve which, under normal operation, is left closed, but can be used by the diver to equalize the pressure in the supply lock if needed. To mount the door, the internal projection of the nozzle must have a minimum of 5-�/4” clearance on the sides to accommodate the hinge and spring clasp. It must also be mounted just above horizontal center-line. Installing higher or lower will impair the ability to install the door strap.
Please call for more information.
�81253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
Amron’s 450M BIBS mask is the perfect combination of performance, durability and comfort. It has been specifically designed to meet the rigorous NORSOK U-101 breathing standards and has been successfully performance tested by NUI and validated by DNV. Un-like other BIBS on the market today, Amron’s 450M is built to withstand the extreme conditions found in a saturation diving environment. The Amron 450M BIBS demand regulator is fully adjustable to allow for easy breathing from surface decompression all the way down to 450 meters pres-surized depth. Diver’s comfort was a major consider-ation so it comes with a comfortable oral nasal and a supportive head strap.
PATENT PENDING
Amron 450M BIBS MASK
Features
Third party tested and certified by NUI to NORSOK U-101:1999 and verified by DNVEasy breathing (light inhalation and exhalation resis-tance, resulting in low work of breathing)Rugged regulator housing with stainless steel valve assembliesTool-less removal of demand and exhaust valve as-semblies for ease of maintenance and servicePneumatically balanced demand regulator with fine tune adjustmentPneumatically balanced exhaust regulator with over-board dump, permits minimum ventilation of the chamberVacuum relief valve includedGas router and CO2 purge mechanism attached to the valvesUltrafit, high comfort silicone oral nasal, designed to fit most faces and accommodate a microphoneFull head harness for added comfort during long administrationFor use with Air, Oxygen and Heliox
•
•
•
•
•
•
••
•
•
•
�9202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER EQUIPMENTAmron 450M Breakdown
401253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
Amron’s 350M BIBS mask is the perfect combination of performance, durability and comfort. It has been specifically designed to meet the rigorous NORSOK U-101 breathing standards and has been successfully performance tested by NUI and validated by DNV. Un-like other BIBS on the market today, Amron’s 350M is built to withstand the extreme conditions found in a saturation diving environment. The Amron �50M BIBS demand regulator is fully adjustable to allow for easy breathing from surface decompression all the way down to �50 meters pres-surized depth. Diver’s comfort was a major consider-ation so it comes with a comfortable oral nasal and a supportive head strap.
PATENT PENDING
Features
Third party tested and certified by NUI to NORSOK U-101:1999 and verified by DNVEasy breathing (light inhalation and exhalation resis-tance, resulting in low work of breathing)Rugged regulator housing with stainless steel valve assembliesTool-less removal of demand and exhaust valve as-semblies for ease of maintenance and servicePneumatically balanced demand regulator with fine tune adjustmentPneumatically balanced exhaust regulator with over-board dump, permits minimum ventilation of the chamberVacuum relief valve includedGas router and CO2 purge mechanism attached to the valvesUltrafit, high comfort silicone oral nasal, designed to fit most faces and accommodate a microphoneFull head harness for added comfort during long administrationFor use with Air, Oxygen and Heliox
•
•
•
•
•
•
••
•
•
•
Amron 350M BIBS MASK
41202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER EQUIPMENT
Amron 350M Breakdown
421253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
The Pressur Vak II is designed to administer oxygen or gas mixtures to a diver or patient in a hyperbaric cham-ber environment. The demand regulator assembly pro-vides breathing gas on demand (inhalation). The regula-tor is designed to operate with a constant inlet pressure of 65 to 125 PSIG over chamber pressure.
Item Part Number DescriptionA-1 80�152-XX Faceseal Assy with Headstrap
Parts A7 - A9 make up the buckle assembly for the head strap.
4�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
The Scott Series 80�600 Inhalator is designed for dry atmosphere decompression in a recompression chamber and other applications where it is desirable to breathe mixtures other than ambient and is not critical if the exhaled gas is vented directly to the chamber at-mosphere. This mask is used for surface recompression of persons in a recompression chamber.
CHAMBER EQUIPMENT
Item Part Number Description1 801804-00 1st Stage Regulator Assembly
2 58�70-00 Regulator Body Only
� 6818-� Plug, Regulator
4 8580-00 Coupling, Regulator
5 18969-00 Quick Disconnect
6 18970-00 Hose Plug
7 260�7-08 Hose Assembly, 8ft.
8 800227-00 Demand Regulator Assembly
9 26018-01 Cover, Regulator
10 26010-01 Clamp, Regulator
11 26004-01 Diaphragm
12 2827-08 Gasket, Regulator to Faceseal
1� 800228-00 Case Assembly
14 27495-00 Microphone Assembly
15 62�2-00 Microphone Only
16 58506 Tinsel Line Cord, 8ft.
17 27495-04 Housing, Microphone
18 80�677-02 Faceseal w/Straps
19 600118-00 Strap Assembly
22 64001-00 Buckle Bar and Clip
2� 64152-02 Exhaust Valve Assembly
24 2827-49 Gasket, Hose
25 10005711 Plug
Rk-80�600 Inhalator Repair Kit
RK-800227-00 Regulator Repair Kit
Scott 803600 BIBS Mask
441253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
This BIB mask is designed for use in cham-bers, diving bells and hyperbaric welding en-vironments. STS-SHB
High performance pneumatical-ly balanced lever operated pop-pet-valve regulator, with operator adjustable venturi assistance by means of a lever operated air flow spoiler mounted co-axially about the valve spindle.
Apart from the operator ad-justable venturi the mask has two other adjustments, lever height (24 seat) adjustment for optimiz-ing the lever travel and a adjust-ing screw (15) for higher supply pressures. This can be used by the service technician to fine tune the regulator to give the opti-mum breathing performance for a range of supply pressures
STS-Single Hose Bell BIBS Mask
Features
45202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Dual Treatment Panel: Model 8890-2
Model 8890 Oxygen Treatment Panel
The Model 8990 Treatment Panel provides easy administration and humidification of the oxygen supply to the patient within the cham-ber. Exhaled gas is discharged outside of the chamber, thereby aid-ing in control of the oxygen and carbon dioxide gas levels within the chamber. The panel has a wide array of treatment hoods and masks available for use. This panel is not for use with standard BIBS treat-ment masks.Also available in two patient model (Model 8890-2)
CHAMBER EQUIPMENT
Input pressure range: 15 PSIG over chamber pressure to 100 PSIGMaximum pressure: 100 PSIGSupply inlet fitting ¼ in CPI typeHood supply on/off valve: ¼ turn ball valveHood supply flow meter: 5-50 LPMSupply outlet connection: 22 mm ODHumidifier supply flow meter: .6-5 LPMHumidifier outlet connection: O2 fittingExhaust inlet connection: 22 mm ODExhaust flow control valve: needle valveHood exhaust on/off valve: ¼ turn ball valveExhaust outlet fitting: ½ in. CPI typeWeight: 5.1 LBSLength: 9”
Depth: 2” Height: 8.5”
•
•••
•••••••
•••
Standard Unit SpecificationsCE registeredEasy administration and humidification of oxygen supplyAvailable with a wide selection of masks and hoodsOxygen flow rates are adjustable and easily monitoredSmall size designed for easy installation
••
•
•
•
Features
461253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
The Model 9000-ECS is the supply source for chilled or heated water which is circulated through an internal chamber conditioning system such as the Model 9100 ICS2. When used in conjunction with one or more internal units, the system provides temperature and humidity control by cooling and dehumidifying or heating the chamber environment.
Power 220 VAC, 60 Hz., 1 phase, 15 AmpCooling Capacity 4000 BTU/hr.Heating Capacity �000 WattsFluid Flow Rate � GPM @ 5 PSIGFluid Media 50% Ethylene or Propylene Glycol 50% WaterDimensions Length: 19.5” Width: 27.0” Height: 30.25”Weight With Fluid: 215 LBS Without Fluid: 175 LBS
The Model 9100 is designed for use in air decompression and hyperbaric medical chambers. The unit has a single heat exchanger coil which can be used for cooling or heating, depending on the temperature of the fluid supplied to the unit. When cool fluid is supplied the unit will provide both cooling and dehumidification of the chamber environment.
Power 24 VDC, 2 AmpsDepth Rating 250 FSWCooling Capacity 4000 BTU/hr.Heating Capacity �000 WattsFluid Flow Rate Required �-6 GPM @ 5 PSIGFluid Media 50% Ethylene or Propylene Glycol 50% Water
Model 9000-ECS, External Chamber Conditioning System
Unit Specifications
Model 9100-ICS2, Internal Chamber Conditioning System
Unit Specifications
47202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER EQUIPMENT
Oxylance Personal Cooling System As body temperature rises, work performance, decision making ability and reaction times decrease, while the risk of heat exhaustion and heat stroke increase. The Oxylance Personal Cooling system allows the core of the body to keep cool, greatly decreasing the risk of heat exhaustion or heat stroke during the same amount of exposure. One situation relevant to most companies is the decompression chamber, which is hot and humid. The Oxylance Personal Cooling System has been tested as a means of making the diver more comfortable in the environment. The Oxylance Personal Cooling system consists of a shirt with of surgical capillary tubing installed, 10’ of supply and return hose, and a cooler with a 24V pump. The cooler is filled with ice and water and then plugged in to a power supply. It then begins circulating the cooled water across the chest and back which assists in bringing the core temperature down.
24 Quart Cooler 24v Double-Insulated, UL Approved Pump10’ Cooling Hose w/Insulated CoverCool Shirt (please specify size on order)Tested to 450 FSWUses Only Ice and Water2 to 6 Hour Cooling Time (depending on ice used)
•••••••
Oxylance Cool Shirt System Specifications
Reduces dehydrationReduces heart rateHelps maintain a safe core body temperatureCools 28 times faster than cool air alone
CS-OX-C-MLS Male Hose Connector (Replacement Part)
Cooling PadCS-OX-24X60PAD Therapeutic Cooling Pad
49202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
The Bay-Tech Industries chamber power supply is a multi-functional device built for many of your standard chamber power needs. The unit is complete with scrubber on/off switch, dual light outlets and includes dimmer switches.PS110/24
Sound powered phone with straight cord for use in hyperbaric environ-ments.SPT-550SCSpeaker Replacements: TRU-105
Heavy-duty plastic cra-dle for sound powered phones.1905-000
CHAMBER EQUIPMENT
Heavy-duty 8ohm speak-er for internal chamber use.DCM-3
The Amron 7140 LED Hyperbaric Chamber Light is an economical light rich with features. It uses a �.2 Watt LED Bulb that produces limited heat due to a high performance heat sink. It uses a standard � Pin connector for power, is milled from 6061 aluminum and is rated to 1000 FSW.7140-01
Provides communication between operator and cham-ber. Headset connection is wired for conference mode.3113
5 watt, 8ohm low cost speak-er for chamber operations.3114
The light is designed for use in a decompression chamber. Three pin connector ensures compatibility. This light is DNV approved.Light: STS-HBLBulb: STS-HBL-B24
Speaker, Model 3114Speaker, Model 3113
Speaker, DCM-3CradleSound Powered Phone
7140 LED Chamber LightChamber LightChamber Power Supply
Solid machined brass BIBS manfold includes 4 inlets and 4 exhaust ports. Ideal for appli-cations where space is limited.8000-004
BIBS Manifold
501253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Stainless hyperbaric toilet for saturation systems. HT-01
Mounts to chamber viewport for quick viewing.*Gauge not included
CGB6
Analog Hygrometer for temperature/humidity readings in a hyperbaric environment.HTAB-176
Heavy duty 1/2” brass bulkhead penetrator with rubber bushing.1502-1/2 (Terminal)SRB-106 (Bushing .4�75 OD)
Stainless steel 90 degree penetrator with 8’ tails and 4 conductor wire. 10,000 PSI rating.1/2SS-4 (4 Wire)1/2SS-6 (6 Wire)
Vinyl covered mattress made with fire retardant materials for 54” chambers.CM02
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER EQUIPMENT
This unit has a working depth of up to 1500 FSW and is supplied with a mounting bracket. Total Volume: 7.5 LitersExtinguishant Volume: 5 Liters STS-5000Refill Adapter Number: STS-ADAP-Extinguisher
This is not to be used on electrical fires over 24v.
This is a Class 2-A extin-guisher which provides fire fighting safety equip-ment and is designed for the pressures and confines of a chamber. Extinguisher is filled with potable water and has a maximum work-ing depth rating of 225 FSW.
240
Non-toxic refill solution for STS fire extinguish-ers.STS5001 - Refill for STS-5000 (5 liter)
STS2001 - Refill for STS-2000 (2 liter)
Fire Blanket
Extinguisher Refills
Model BTI 5000Model 240
3 liter fire extinguisher that is perfect for small spaces. This unit has a working depth of up to 1500 FSW, and is supplied with a mounting bracket. Total Volume: 3 LitersExtinguishant Volume: 2 LitersSTS-2000Refill Adapter Number: STS-ADAP-Extinguisher
This is not to be used on electrical fires over 24v.
Model BTI 2000
This unit is a heavy-duty fire blanket which is used inside of chambers to smother fires. It comes with a water resistant cover with a quick-pull lanyard. These can be mounted via brackets in the cham-ber for quick access during an emergency.FB5X6
521253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER EQUIPMENT
Computer Chamber Interface
The CCI from HCI, LLC is the latest innovation in hyperbaric technology for air compressed chambers. Imagine paperless charting, access to medical records, real-time video conferences, and learning and memory training programs, all while never leaving the hyperbaric chamber!
All of this and more is possible with the Computer Chamber Interface!
Composed of a solid brass CNC machined penetrator and standard computer interface cables, this unit allows the low voltage components of a computer (monitor, mouse, speakers, microphone, and even web-cam) to be run inside of the chamber via USB cables while the tower remains safe outside of the chamber atmosphere.
Commercial Diving:PhoneConferencingEntertainmentWeb BrowsingWeb Camera
Military:Briefing / DebriefingTraining
•••••
••
Research:Log entries and dives Send reports via emailTeleconferencing/Trouble shootingDirect access to real-time information during research.Explore the possibilities of enhanced learning and physical therapy.
Therapy:Recent studies indicate improved brain functionality during hyperbaric treatments combined with computer training programs.
Clinical:Access to patient recordsLive video-conferencesEmail and fill out reportsPsychometric testingPhone
Entertainment:Watch moviesPlay games
••••
•
•
•••••
••
Standard Configuration:4 x USB Cables
1 x Mic
1 x Speaker / Headphone
1 x 15-Pin VGA Cable
Specifications:1” NPT Penetrator
4.5” OAL (5.75” w/strain relief )
6’ Cables
Tested to 750 PSI
5�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Purafil Chemisorbant is designed for use in environments where toxic, corrosive and odorous gases are a concern. In use, Purafil absorbs contaminants and odors as air is passed through the media.
PURAFIL, 50lb Pail
Purafil Chemisorbant shall meet the following re-moval capabilities:Hydrogen Sulfide - 8% minimum by weight.Sulfur Dioxide - 3.5% minimum by weight.Nitric Dioxide - 2.5% minimum by weight.Nitrogen Dioxide - 1.0% minimum by weight.Formaldehyde - 1.4% minimum by weight.
Note: As an example, 100 LBS of Purafil Chemisor-bant will remove eight pounds of hydrogen sulfide.
CHAMBER EQUIPMENT
Sodasorb HP-I is a media used in commercial diving to absorb carbon dioxide from a hyperbaric atmosphere or in scuba rebreathers. Sodasorb contains ethyl-violet which changes color as its capacity for carbon dioxide absorption is exhausted.
The standard granule size mesh is is a 4-8 Tyler and a finer 6-12 mesh is available. Sodasorb HP is processed into porous, coral-like granules in order to expose a greater area of the absorbents surface. In a canister, these knobby granules permit free inter-granular circulation of gases. They have no flat surfaces to stack and block, and their hardness makes them highly resistant to powdering and breakage in packing, shipping and handling.
SODASORB HP-I, �7# Pail
Purafil Chemisorbant
Contaminant Removal Capability
Sodasorb HP
541253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
The premier two-pack, high solids, high build surface tolerant epoxy mastic coating for corrosion protection of steel and concrete. For the protection of steelwork and steel structures in industrial facilities, bridges, tank exteriors,marine exposures, offshore, oil refineries, mines and mineral smelters, pipe work, structural steel and small industrial factories. Also suitable for protection of concrete and as a finish for floors.AMERLOCII-P - 2 part chamber paint kit.
Surface tolerant, self priming top coat.Suitable for application direct to most exist-ing coatings.Compatible with prepared damp surfaces.Encapsulates adherent rust remaining on prepared surfaces.Can be over-coated with a wide range of topcoats.Provides excellent corrosion protection in marine and industrial environments.Low temperature cure down to -18°C.Good resistance to splash/spillage and fumes of most chemical materials.Fast drying times, re-coat in � hours at 20°C.NOT APPROVED FOR POTABLE WATER
••
••
•
•
••
••
CHAMBER EQUIPMENT
Amerlock II Paint
Amerlock Properties
Oxy-Safe (also called Compound O) is used following the tumbling of tanks to pre-vent flash rust, a reddish film which usually forms on walls while drying. This chemical re-places compound B which is a non-oxygen compatible rust inhibitor. Oxy-Safe can be used in oxygen as well as Nitrox en-vironments.OXYSAFE, 1 Gallon
OxySafe Rust Inhibitor
Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Carboguard 890 serves as stand-alone system for a variety of chemical environments. Carboguard 890 is also designed for various immersion conditions.PNT-CARBOLINE - 2 part chamber paint kit
Carboline 890 Paint
Excellent Chemical ResistanceSurface tolerant characteristicsConventional and low-temperature versionsSelf-priming and primer/finish capabilitiesVery good abrasion resistanceVOC compliant to current AIM regulations
••••••
Carboline 890 Properties
55202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
This unit can be
mounted into ei-
ther a chamber or
in a diving bell. In
either location, it
can be fitted out
with either a 6kg
(1�.2lb) Carbon
Dioxide canis-
ter that provides
scrubbing for up
to three divers
over a 4-6 hour period, and is also
available with a 4kg (8.8lb) canister
for use in a two diver bell. Either op-
tion increases available space in a
diving bell. Available with ABS and
DNV Certification.
This unit can be
installed into
diving bells or
into chambers.
Each scrubber
can remove the
carbon dioxide
exhaled by two
or three divers
for up to six hours before recharg-
ing, depending on which canister
is installed. Available with ABS and
DNV Certifications.
Lexmar emer-
gency lung pow-
ered scrubbers
come with their
own dedicated
tubular bag.
The clear acrylic
tubing must be
filled with a car-
bon dioxide ab-
sorbent before commencing with
a saturation dive. Oral Nasal masks
and straps are provided and the up-
per part of the unit houses a char-
coal filter which must be replaced
depending on the actual usage.
CHAMBER & SATURATION EQUIPMENT
Heavy duty stainless steel canisters for use with ei-ther carbon dioxide scrub-ber units. 6kg and 4kg cans available.LME-CANS-4KGLME-CANS-6KG
Model 6424 Papst Fan, 24v, .75 Amps. Meets IMCA standards.6424U
This unit, combined with the “ABYSS II” Helmet, is currently the most cost effective method of reclaiming/recovering gas available. This system is designed to recover the gas exhaled by the diver(s) while in the water and process it back into a breathable mixture and re-delivers this back to the diver.
The LESGAZ system comprises of three main units:1. Topside Gas Reprocessing Unit (TRU)2. Bell Onboard Unit (BOU)�. Reclaim Management Panel (RMP)
The diver exhales through the helmet exhaust/recovery valve then is passed through the Bell Onboard Unit, removing any water in the return hose. This provides another level of safety with the Pilot Operated Safety (POS) valve.
After passing through the Bell Onboard Unit (BOU), recovered/reclaimed gas is then passed through the umbilical into the Topside Gas Reprocessing Unit (TRU). Oxgen is then injected to meet the desired level of mix for the given depth mixture. The gas is then compressed using either electrical or air driven pumps, delivered into the medium pressure receivers and then to the bell Reclaim Management Panel (RMP). On arrival at the control panel, it is analyzed again before being sent back to the divers.
Pneumatic Reclaim Unit
Electrical Driven Reclaim Unit
External Water Trap Internal Bell Gas Panel
Reclaim Management Panel
Bell Onboard Unit
LME-RC-02-DH “LEZGAZ” DiverGas Recovery Reclaim System
57202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER & SATURATION EQUIPMENT
The Divers Gas Reclaim Unit consists of three basic units designed to recycle the divers exhaled gas.
The three units consist of: ProcessorGas ManagementInternal and External Bell Equipment
The return line gas enters the filter system, consisting of a water trap and a series of micro particle and bacteria filters, where the oxygen metabolic make-up takes place. The final filter is the CO2 absorbent.
The scrubbed gas returns to the diver via the volume tank, dive control panel and the bell panel. The diver exhausts directly to the internal bell equipment where the correct negative pressure is maintained by the bell BPR.
The surface processor, booster and electronic control units are mounted on a purpose built skid. The booster is controlled via PLC system complete with incorporated alarms. The PLC is also fitted with an EPROM that will automatically reset the PLC in the event of a power failure.
The booster is capable of supplying 200LPM to the divers at a maximum depth of �00m; however the unit is tested and approved to meet the DNV requirement of 1�5LPM for two divers at �00m.
The gas management panel located in the dive control station is fitted with one CO2 and one O2 analyzer monitoring the outgoing gas through the processor. The panel also controls the oxygen injection and the initial pressurization of the system.
LME-RC-03-SHY “LEZGAZ” DiverGas Reclaim Unit (Single Compressor)
581253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
CHAMBER & SATURATION EQUIPMENT
The Divers Gas Reclaim Unit consists of three basic units designed to recycle the divers exhaled gas.
The three units consist of: ProcessorGas ManagementInternal and External Bell Equipment
The return line gas enters the filter system, consisting of a water trap and a series of micro particle and bacteria filters, where the oxygen metabolic make-up takes place. The final filter is the CO2 absorbent.
The scrubbed gas returns to the diver via the volume tank, dive control panel and the bell panel. The diver exhausts directly to the internal bell equipment where the correct negative pressure is maintained by the bell BPR.
The surface processor, booster and electronic control units are mounted on a purpose built skid. The booster is controlled via PLC system complete with incorporated alarms. The PLC is also fitted with an EPROM that will automatically reset the PLC in the event of a power failure.
The booster is capable of supplying 200LPM to the divers at any given depth; however the unit is tested and approved to meet the DNV requirement of 1�5LPM for two divers.
The gas management panel located in the dive control station is fitted with one CO2 and one O2 analyzer monitoring the outgoing gas through the processor. The panel also controls the oxygen injection and the initial pressurization of the system.
LME-RC-02-DC “LEZGAZ” DiverGas Reclaim Unit (Dual Compressor)
DNV APPROVAL TO150 METERS
59202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER & SATURATION EQUIPMENT
LME-CGR-01 Chamber Gas Reclaim
LME-GTC-01 Gas Transfer Compressor
The Chamber Gas Reclaim Unit is designed and manufactured to safely compress mixtures of helium and oxygen without cylinder oil lubrication through use of teflon based piston rings.
The unit works in conjunction with the gas bag that collects all exhaust or vented gas from the system. When the gas bag frame detects inflation via infrared sensors, the compressor is activated and the gas is reclaimed. Gas in the bag is displaced or transferred via the chamber gas reclaim unit for purification processing before it is transferred to the reclaimed chamber gas storage tubes.
It is capable of compressing gas up to 1450 PSI and is equipped with a full range of control features to allow the machine to operate safely without compromising gas purity.
The Gas Transfer Compressor is designed and manufactured to safely compress mixtures of helium and oxygen without cylinder oil lubrication through use of teflon based piston rings.
The gas is displaced or transferred to the respective storage; eg. from supply vessels, according to operational requirements.
It is capable of compressing gas up to �625 PSI and is equipped with a full range of control features to allow the machine to operate safely without compromising gas purity or contamination.
The Hyperbaric External Regeneration System is a standalone unit designed to circulate and re-process gas from the decompression chamber while at depth, either on mixed gas or air; the system controls the environmental conditions in the chamber ensuring that the temperature, humidity and CO2 are maintained.
The HERS incorporates three basic units, the positive displacement blower, hyperbaric environmental conditioning unit (HECU-06: Chilling and Heating) and sodasorb CO2 canisters.
The positive displacement blower, with an actual circulation of 4110.6cu.ft (116.4m�) per hour, changes the atmosphere in a 6-Man 882.8 cu.ft (25m�) decompression chamber 4.66 times per hour. The sodasorb CO2 removal canisters are downstream of the DDC before the Robuschi blower. This enables the chamber gas to be drawn through the sodasorb removing the CO2 and other trace contaminants. The chamber gas, aided by the blower, passes through the HECU-06 heat exchangers where the chamber optimal humidity and temperature are controlled to within +/- 1 degree of the relative set points. The humidity inside the DDC is controllable between 50% - 70% and the temperature between 27oC - �5oC. The units are controlled by a humidity/temperature transmitter which sends a signal to the control unit on the SAT panel and is fully automatic. In the unlikely event of a controller failure, the HERS is fitted with a full manual override.
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER & SATURATION EQUIPMENT
The HECU-05 Hyperbaric Environment Control Unit has been manufactured to provide a low maintenance unit for use in Chambers and Saturation Systems up to depths of �00 MSW
The HECU is designed to maintain a chambers internal environment with temperature control between 75oF (24oC) and 95oF with humidity from 50%-70%. This system, which used in conjunction with the CCU-0� (listed below) can also remove the CO2 produced by up to 6 people. The temperature control is achieved by using a Temperature Controller and Chamber/Habitat sensor unit. Each system provides all circulation, heating, cooling and dehumidification required for chamber/habitat up to 560 cu.ft (16 cubic meters).
The system can handle between two and three CCU-0� units (shown at right). It also provides the fluids for temperature and humidity control, and the CCU converts these fluids into heating, cooling, dehumidification and can also be filled with an absor-bent to remove CO2 while circulating the gas.
The LME-HWE-D-02 fully complies with international requirements to have a “fully redundant” back-up system at all times. When fitted with an optional header tank, it can allow continuous diving even when undertaking maintenance on one of the units as per the IMCA guidelines.
The hot water unit can be configured into various sizes to meet your space requirements, either as a stacking unit with other same size equipment, as a wall mounted unit and finally a free standing unit. You can decide. Please call for information!
The electrically powered Model HWE Units are designed and constructed for use in professional diving systems.There are two basic models:
1. Single Heater Unit @ 84 KW Heating Capacity (HWE-04)2. Single Heater Unit @ 156 KW Heating Capacity (HWE-0�)
The HWE Units can be variably adjusted to suit the temperatures at various location and depths. Heat losses through the umbilical can be compensated for by controlling the temperature at the source. As a safety feature, the machine is controlled by a safety thermostat which has been preset to prevent scalding.
Temperature of the water is controlled via a �-way electro-mechanical valve which has an accuracy of +/- 1 degree celsius and can actuate within 10 seconds.
LME-HWE-04 Hot Water Unit
Unit Specifications
LME-HWE-D-02 Hot Water Unit
6�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER & SATURATION EQUIPMENT
The Hyperbaric Fire Fighting System functions as a sup-pressant in the event of a fire in the chamber and has been designed specifically for this type of environment.
Each lock of the chamber complex shall be served by an independent dedicated unit. It works by sensing the depth/pressure at which the lock is operating, via a tracking regula-tor. The unit is able to supply suppressant at any depth and is set to deliver it to depth + 70 PSI (5 bar).
LexMar’s hyperbaric fire fighting system complies with the rules and meets the requirements of the classification societ-ies.
It can be assembled to a variety of configurations and as-sembled with various types of control components that may be preferred by the customer.
The Saturation Control Panel functions as a control and monitoring station for equipment and machinery relating to the diving system, particularly to the SAT chambers and its ancillary equipment.
The control panel is equipped with:Depth gaugesControl valvesPressure regulatorsFlow-metersGas analysersCamera monitorsCommunicationsScrubber controlLighting controlTemperature and humidity controlVideo recorder
•••••••••••
LME-SCP-02 Saturation Control Panel
LexMar complies with the rules of classification societies by ensuring that the requirements stipulated are designed into our control systems.
The panels are built in a modular design to comply with customer requirements and can be used in either fixed or portable installations.
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Lexmar Model LME-BELL4.5M-�D is a 4.5 meter three man rated, side and bottom mate SDC and is rated to �00 meters (1000 FSW) and comes complete with a certified flotation system, stability certificate, and a tubular bumper system. The build code is ASME PVHO and is certified by ABS and is in compliance with IMCA standards. The external SDC shell is fully insulated, has fiberglass matting and is covered with a smooth gel-coat finish for additional protection. The internal shell hull is painted with flame retardant paint. Man-Way trunks have an internal diameter of no less than 610mm (24”). The SDC has three separate means of recovery: The main lift wire, the two part clump weight assembly, and the main SDC lifting pad eye delta plate which can be used to attach a crane sling. The negatively buoyant SDC is equipped with a two part drop weight system, thus; only when the drop weights are released does the SDC become positively buoyant.
CHAMBER & SATURATION EQUIPMENT
Bottom and side mate capabilityBuilt to ASME PVHO standardsIMCA compliant2 Part drop weight system24” Manways2 x 50m (165’) excursion umbilicals1 x 55m (180’) bellman/divers excursion umbilical1 x Through-water communications system1 x SDC transponder locating system1 x Stainless steel electrical change-over box2 x 24VDC Roof lights� x Passive lung powered scrubbers� x View ports for observation1 x CCTV camera� x Single hose BIBS units1 x Sound powered phone and open circuit talk-back speaker communications system
••••••••••••••••
2 x ��0m Caisson gauges (external and internal)1 x Internal PPO2 analyzer� x Seats, safety harnesses, and helmets1 x Diver emergency recovery system1 x First aid/Medical kit1 x Emergency battery pod (24hrs operation)Emergency on-board gas supplies (24 Hours / � Man)1 x Xenon flashing strobe light1 x Through water communications transponder1 x Lost bell locator transponder and diver held receiver1 x Delta plate fitted for alternative lifting point with bellow sling1 x Steel wire mechanical spliced lifting sling
This unit was designed and built for a contractor in the Gulf of Mexico as a one of a kind control module specific to their operations. It consists of a fully air conditioned and insulated 20’ container fitted with marine doors, windows, rubber studded floor covering, escape hatch and dynamic lifting corners complete with certified slings. Internally fitted with three-diver bell control panel complete with bell electrical panel, analyzer panel and reclaim control panel. Two unscrambler radios - both with Carbon Dioxide and Oxygen analyzers, 9” flat screen CCTV color monitors and CCTV Color Cameras for inside of the bell. One chamber control panel for a 4/6 man main lock, TL Trunking, and HRC complete with three Carbon Dioxide and three Oxygen analyzers, three flat screen CCTV monitors and cameras, and two three-diver radios. This unit was fully outfitted in accordance with IMCA requirements.Weight & Dimensions (approx):Dimensions: Height: 8’ Length: 20’ Width: 8’Weight: 9 Tons
CHAMBER & SATURATION EQUIPMENT
Combined Bell and Chamber Control Module
67202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CHAMBER & SATURATION EQUIPMENT
Hyperbaric Rescue Chamber The Hyperbaric Rescue Chamber has been designed to evacuate the divers in the Saturation System in the event of an emergency.
During normal operations, the HRC can be utilized as a living chamber, par-ticularly in a portable Saturation Diving System.
The HRC can support up to 18 divers complete with life support capability on autonomous supply for 24 hours and 72 hours plus in conjunction with the Life Support on the Emergency Support Module. LexMar builds HRC’s in accordance with IMCA and the classification societies requirements. HRC’s are available with davit launch systems or pull-off systems for launching to suit the clients requirements.
Built in breathing system (bibs)Environmental controlsCommunicationsLightingSanitationOn-board gas supplyElectrical power via battery podsEmergency beacon/transponder
The HRC Control Van compliments the Hyper-baric Rescue Chamber on the previous page. The unit comes complete with Hyperbaric Environ-mental Control Unit Chiller, electrical supply and transformers. Included is a control panel com-plete with Gauges, analyzers, unscrambler radio, backup radio and flow-meters.
Air conditioner unit Environmental control systemLights, sockets and transformers from 440VAC /220VAC -24VDC30’ Deck umbilical consisting of: gas, BIBS, O2 supply, pneumo, hot water and cold water hoses, comm and CCTV cablesControl panel fitted out with 2 x HeO² supplies, 2 x treatment gas supplies and 1 x O² supply. All depth gauges, pressure gauges, flow meters, O² & CO² analyzers, unscrambler radio, and emergen-cy comms unit
Dimensions (approx.):Length: 118”
Width: 94” Height: 88”
•••
•
•
•
HRC Control Module
Features
69202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Germicidal disposable wipes for use in cleaning bib masks and interior chamber surfaces. Q89072
Non-staining, non-toxic, food grade germicide. Similar to Betadine®. 1 Gallon.QUICKSAN
Germicidal cleaning so-lution for chamber. 1 Gal-lon. MADACIDE
Biological enzyme used to break down waste and im-prove performance of waste systems. 1 Gallon. BIOFRESH
Sani-Wipes
MadaCide
Quick-SanBio-Fresh
O2 cleaning solution for gas handling systems. 1 Gallon. 111/113
Oxygen Cleaning Solution
CLEANING PRODUCTS
MadaCide Fast-Drying WipesMadaCide Fast-Drying
Germicidal cleaning solution for chambers and other non-porous hard surfaces in a fast drying formula. 1 Gallon. MADACIDE-FD
Fast drying germicidal cleaning solution on disposable wipes for chambers and other non-porous hard surfaces.MADACIDE-WP
Quincy QR-25 Series Compressors The proven performance of the Quincy QR-25 Series is best examined through decades of delivering compressed air on-demand. There are over two million Quincy QR-25 compressors currently in use, some originally installed over 40 years ago. Decades of reliable operation ensures complete satisfaction and builds confidence day after day, year after year.
The Quincy QR-25 Series compressors produce more air using less horsepower by running at slower speeds. The efficiency of running slower also has another benefit - lower
operating temperature. Lower temperature means cooler air and less stress on the critical compressor components.
In addition, the Quincy QR-25 series utilizes a positive displacement rotary oil pump that lubricates every critical area of the compressor, from the “bottom end” to the wrist pin. This keeps things running smoothly and further reduces the operating temperature as the oil absorbs the heat. To keep the oil clean, a spin-on automotive type oil filter is standard on 2-stage compressors.
Quincy 2-Stage Pressure Lubricated Compressors
71202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS
The AC5120KASR is designed to meet or exceed all existing government and industry regulating standards and has been built by personnel that know the industry and conditions to which the equipment is subjected. We have combined the irreplaceable Quincy 5120 air compressor with the new “M” Series Kubota, Model D170�M, diesel engine to build a compressor package that is affordable, easy to maintain, compact in size, light weight and fuel efficient. It maintains
200 PSI @ 88.5 cu.ft of free air. The skid measures 3.5’ x 7’ long and is made of tubular steel with forklift slots and pad eyes for a four point lift. Included in this package is a Unit Certification Pouch for job site documentation.
Powder coated tubular steel mini-mal debris frame with drip pan and forklift pockets4 point lift4 Diver ASME coded manifold15 Gallon aluminum fuel tankAluminum belt guardAluminum radiator guardUpdated Isolated inner baseHi-temp / low oil pressure Racor shutdown�0 Gallon ASME coded, 250 PSI air receiverHour meterStainless steel hardwareStainless steel pressure gaugesBrass plumbingRelief valveCheck valveEpoxy primed and painted engine and compressorLoad tested
25 HP TEFC electric motor� Phase460 V 60 Hz1750 RPMPhase Monitor
••••••
COMPRESSORS
Quincy 5120 climate controlTwo Stage 4-cylinder12�.0 cu.ft Displacement92 / 78.6 cu.ft Free Air Delivery195 PSI Set Air Pressure
•••••
Customer must specify power requirements at time of order.
Two-stage filtrationThree-stage filtration Custom paintAluminum coverGalvanized or painted frame
•••••
50 Hz�80 V1475 RPM78.6 cu.ft
60 Hz460 V1750 RPM92 cu.ft
Load test�0 HP motor for 50 or 60 Hz operation
••
Standard Unit Specifications
Motor
Compressor
AC5120ESKDM Compressor Package
Options
We have designed a compressor package to meet the need of customers that want an electric driven unit. This unit can be containerized or installed below deck and are ideal because of the reduced noise, lack of fuel consumption, and ease of maintenance. The unit is comprised of a 5120 Quincy Compressor, a 120 Gal. air receiver, and a �0 HP Electric Motor which is mounted in an engineer certified skid. Each compressor package comes with a 4 outlet manifold, a 25 ft. power cable and a 6 ft. ground cable. The electrical system includes a phase monitor to prevent the unit from reverse rotation as well as saving the starter box from damage due to improper connection or incorrect power source.
7�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS
The HydraComp compressor is a new patent pending concept in hydraulic and compressor application. The “tri-circuit” hydraulic power system provides for 2 hydraulic tools to be used at the same time or independently. The third, a 22 GPM circuit, overrides the (2) 11 GPM circuits. The 5120 Compressor is clutch power-take off engaged. All components can function at the same time or independently. The HydraComp is two pieces of equipment in one skid. This cuts down on deck space requirements, gross weight and saves money.
HydraComp Compressor / Hydraulic Unit
Structural steel welded galvanized skid with forklift slots and 4 point lifting eyesAluminum cover7 Point deluxe vibration isolation plate110% Containment drip pan45 Gallon fuel tankFuel gaugeShell / BHP compliant
Kubota V�600e diesel engine65 HP @ 2600 RPMAir startLubricatorSentinel shutdown systemFuel filter and secondary fuel filterClutch power take offAuxillary hydraulic pumpSpark arrestorEpoxy primed and painted
••••••••••
Quincy 5120 climate controlTwo stage 4-cylinder12�.0 Cu.ft displacement88.5 Cu.ft free air delivery200 PSI set air pressure4 Groove power bandBelt guard60 Gallon air receiver4 Diver manifoldCheck valveSafety relief valveDual air filtersEpoxy primed and painted
•••••••••••••
Vickers vane pump22 GPM�000 PSI� Stage proportional valveDeluxe control panelTri-circuit (2 @ 11 GPM or 1 @ 22 GPM)60 Gallon hydraulic reservoirReturn filterSuction strainerTemp site gaugeEpoxy primed and painted
••••••
•••••
Compressor System
Engine Hydraulic System
741253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
This compressor is great for jobs where 5120’s just aren’t needed or are economical. The unit is designed to meet or exceed all existing government and industry regulating standards and has been built by personnel that know the industry and conditions to which the equipment is subjected. We have combined the workhorse Quincy �90 air compressor with the “M” Series Kubota, Model D170�M, diesel engine to make a unit that is affordable, easy to maintain, compact in
size, light weight and fuel efficient. This compressor package maintains 200 PSI @ 66.5 cu.ft of free air. The skid measures 3.5’ x 7’ long and is made of tubular steel with forklift slots and pad eyes for four point lift. Included in this package is a Unit Certification Pouch for job site documentation.
Kubota D170�M Diesel�6.7 Brake HP @ 2800 RPMAir start
•••
Quincy �90 climate controlTwo Stage 2-cylinder90.0 cu.ft displacement66.5 cu.ft free air delivery200 PSI Set air pressure
•••••
COMPRESSORS
Two-stage filtrationThree-stage filtrationElectric startCustom paintLarger fuel tank and skidDual �0 gal. Air receiversAluminum coverGalvanized or painted frameLoad test
•••••••••
Options
Compressor
EngineStandard Unit Specifications
AC390KASR Compressor Package
Hour Meter:
46-T-75-H
ASME Coded Manifold
75202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Aluminum roll-around frame with handles and wheelsStainless steel surge tank1-1/2 Gallon aluminum fuel tankAluminum belt guardIsolated inner base, powder coated for durabilityStainless steel hardwareStainless steel pressure gaugeBrass plumbingRelief valveEpoxy primed and painted compres-sor
Our Model �25KES Air Compressor package is designed as a compact, light-weight unit. The Quincy �25 compressor is driven by a Kubota OC95 air-cooled diesel engine. The Kubota OC95 is one of the few small air-cooled engines on the market today that conforms to the U.S. E.P.A. Regulation for non-road compression-ignition engines.
We have packaged the unit in a small aluminum frame with an isolated inner base, wheels and dual pad eyes, as well as a Unit Certification Pouch for job site documentation.
761253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
COMPRESSORS
Quincy �25 climate controlSingle stage two-cylinder24.60 Cu.ft displacement19.20 Cu.ft free air delivery150 PSI set air pressure
•••••
�.5 Gallon fuel tankElectric startCustom paintPowder coated frameEnclosed belt guardGalvanized steel inner base
••••••
Aluminum roll-around frame with handles and wheelsStainless steel surge tank1-1/2 Gallon fuel tankAluminum belt guardIsolated inner base, powder coated for durabilityStainless steel hardwareStainless steel pressure gaugeBrass plumbingRelief valveCompressor - epoxy primed and painted
Our Model �25Y Air Compressor package is designed as a compact, light-weight unit. The Quincy �25 compressor is driven by a Yanmar diesel engine. The Yanmar has proven itself the standard for small diving compressors for its reliability. The unit is built in an all aluminum frame with an isolated inner base. The unit includes dual pad eyes as well as a Unit Certification Pouch for job site documentation.
Shown with optional electric start and battery box
77202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS, CUSTOM
5120 w/Perkins Engine
5120, Electric, Tank Mounted 5120, Electric, Base Mounted
5120 w/Deutz Engine 5120 w/John Deere Engine
We offer maintenance and repair for your equipment.
We specialize in custom builds. If you need a compressor but want a configuration
that is out of the ordinary, call us! We can help!
5120 Electric Base Mount in Skid w/Dual Volume Tanks
5120 w/Twin 30 Gallon Volume Tanks and Cover
781253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
COMPRESSORS - HIGH PRESSURE
Junior II lightweight portables, complete with air purification system and fill hose, are safe, reliable three stage compressors designed for serious sport divers. Available in single phase 115/2�0VAC and three phase 2�0/460 VAC electric motor, gasoline or diesel engine drive. Capacities range from 2.9 to 4.� CFM charging rate.
Bauer P0 breathing air purifica-tion systemBelt guard designed to meet osha guidelinesInlet filterVibration isolatorsHigh temperature switch (jrii-g)5 Foot fill hose assembly with scuba yoke, bleed valve and pressure gauge
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.**Compressor capacity referenced to standard inlet conditions.E1/115 = Single Phase Electric, 115 VAC/60 HzE1=Single Phase Electric, 2�0 VAC/60 HzE�=Three Phase Electric, 2�0/460VAC/60 HzG=GasolineD=Diesel
Junior II - HP Compressor
Standard Features Optional Features
79202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS - HIGH PRESSURE
Bauer P0 breathing air purification systemBelt guard designed to meet osha guide-linesSturdy, long lasting, low pressure oil pumpHigh temperature switch (oceanus-g)Corrosion-resistant coolersInlet filterVibration isolators5 Foot fill hose asembly with scuba yoke, bleed valve and pressure gaugeStainless steel frame
•
•
•
•••••
•
Visual co/moisture monitor indicatorFinal pressure switch for gasoline engineHourmeter/tachometer (gasoline engine drive)Honda gasoline engineAvailable with automatic condensate drain (acd) and final air pressure switch shutdown
Oceanus light-weight compressors, complete with air purification system and fill hose, are safe, reliable, three stage compressors designed to go above the work of regular sport diving compressors. Oceanus compressors are capable of maintaining up to a two cylinder 5000 PSI DOT storage system.
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.**Compressor capacity referenced to standard inlet conditions.E1/115 = Single Phase Electric, 115 VAC/60 HzE1=Single Phase Electric, 2�0 VAC/60 HzE�=Three Phase Electric, 2�0/460VAC/60 HzG=GasolineD=Diesel
Bauer Oceanus - HP Compressor
Standard Features
Optional Features
801253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Electric motor (1 or �phase), gasoline engine, or diesel engine (DMT 08) (depending on choice of compressor)Inlet filterStainless steel intercooler/aftercoolerHigh temp switch (except for d drive)Vibration isolatorsP0 purification (dmt06 model only)P31 purification (all except dmt06)Low oil pressure switch
•
•••••••
Inter-stage gaugesPurification upgrade to P41Automatic condensate drain (electric driven and electric start models)Pressure switch (G drive)Electric start (DMT08-G/D, DMT10-G)Hour meterCO monitor50 Hz electrical systemImpact frame
•••
••••••
COMPRESSORS - HIGH PRESSURE
Dive Mate takes breathing air compressors to a whole new level. Complete with air purification, Dive Mate is a safe and reliable three or four stage breathing air compressor designed to give you lightweight portability. It is available with electric, gasoline, or diesel engines to suit your needs.
ModelCharging
Rate SCFM*
FAD** HP RPMDimensions
L-W-HWeight
(LBS) Purification
5000 PSI Service
DMT06-E1/E� 6 5 5 1050 4� x 24 x 27 �00-400 P0
DMT06-GS 6 5 6 1050 4� x 24 x 27 �00-400 P0
DMT08-E1/E� 8.4 7 7.5 1250 4� x 24 x 27 �00-400 P�1
DMT08-GS 8.4 7 9 1250 4� x 24 x 27 �00-400 P�1
DMT08-DY 8.4 7 6.4 1250 4� x 24 x 27 �00-400 P�1
6000 PSI Service
DMT10-E1/E� 9.7 8.1 7.5 1180 4� x 24 x 27 �00-400 P�1
DMT10-GS 9.7 8.1 1�.5 1180 4� x 24 x 27 �00-400 P�1
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.**Compressor capacity referenced to standard inlet conditions.E1/115 = Single Phase Electric, 115 VAC/60 HzE1=Single Phase Electric, 2�0 VAC/60 HzE�=Three Phase Electric, 2�0/460VAC/60 Hz (Other voltages are available upon request)GS=GasolineD=DieselDimensions and Weight are approximate and subject to change.
Dive Mate - HP Compressor
Standard FeaturesOptional Features
81202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS - HIGH PRESSURE
When your needs dictate a rugged and performance proven HP compressor package, the Basic package is what you’re looking for. The Basic Package line of compressors is designed for the application that requires a horizontal configuration built around Bauer’s proven air cooled compressors and breathing air purification systems
Breathing air purification system (see chart)
Modern designBauer plc based controller with four line text dis-playNema 4 rated enclosureHourmeterNumber coded wiring harnessLow oil pressure shutdownHigh temperature shutdownEmergency stop push buttonStainless steel tubingPowder coated finish
•••
••••••••
ModelCharging
Rate SCFM*
FAD** HP RPMDimensions
L-W-HWeight
(LBS) Purification
5000 PSI Service
BPII-06-E1/E� 6 5 5 1050 61 x �0 x 45 700-1075 P0
BPII-08-E1/E� 8.4 7 7.5 1250 61 x �0 x 45 700-1075 P�1
BPII-20-E� 21 17.5 15 1�00 61 x �0 x 45 700-1075 P5
BPII-26-E� 26.4 22 20 1�50 61 x �0 x 45 700-1075 P5
6000 PSI Service
BPII-05-E1/E� 5 4 5 1050 61 x �0 x 45 700-1075 P2 SECURUS
BPII-10-E1/E� 9.7 8.1 7.5 1180 61 x �0 x 45 700-1075 P2
BPII-1�-E1/E� 1� 10.8 10 1420 61 x �0 x 45 700-1075 P2
BPII-18-E� 18 15 15 1�25 61 x �0 x 45 700-1075 P5
BPII-25-E� 25.2 21 20 1�00 61 x �0 x 45 700-1075 P5
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.
**Compressor capacity referenced to standard inlet conditions.
E1 = Single Phase Electric, 2�0 VAC/60 Hz.
E� = Three Phase Electric, 2�0/460 VAC/60 Hz.
Other voltages available on request.
Dimensions and weight are approxi-mate and are subject to change.
821253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
COMPRESSORS - HIGH PRESSURE
The Vertecon HP compressor from Bauer is a space saving alternative to other compressors. While compact, it delivers the unsurpassed performance you’ve come to expect from Bauer. The units design allows easy access and requires no tools for basic maintenance checks or fluid level confirmation.
Vertecon - HP Compressor
Breathing air purification system (see chart)
Modern designBauer plc based controller with four line text displayNema 4 rated enclosureSelf-adjusting drive belt tensionerNumber coded wiring harnessEmergency stop push buttonAll stainless steel tubingAutomatic condensate drain system (vtc05, vtc25, vtc26)
•••
••••••
Standard Features
ModelCharging
Rate SCFM*
FAD** HP RPMDimensions
L-W-HWeight
(LBS) Purification
5000 PSI Service
VTC06-E1/E� 6 5 5 1050 44 x �� x 54 6�0-1075 P0
VTC08-E1/E� 8.4 7 7.5 1250 44 x �� x 54 6�0-1075 P�1
VTC20-E� 21 17.5 15 1�00 44 x �� x 54 6�0-1075 P5
VTC26-E� 26.4 22 20 1�50 44 x �� x 54 6�0-1075 P5
6000 PSI Service
VTC05-E1/E� 5 4 5 1050 44 x �� x 54 6�0-1075 P2 SECURUS
VTC10-E1/E� 9.7 8.1 7.5 1180 44 x �� x 54 6�0-1075 P2
VTC1�-E1/E� 1� 10.8 10 1420 44 x �� x 54 6�0-1075 P2
VTC18-E� 18 15 15 1�25 44 x �� x 54 6�0-1075 P5
VTC25-E� 25.2 21 20 1�00 44 x �� x 54 6�0-1075 P5
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.
**Compressor capacity referenced to standard inlet conditions.
E1 = Single Phase Electric, 2�0 VAC/60 Hz.
E� = Three Phase Electric, 2�0/460 VAC/60 Hz.
Other voltages available on request.
Dimensions and weight are approxi-mate and are subject to change.
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS - HIGH PRESSURE
The Engine Driven line of compressors from Bauer are among the largest engine driven compressors in the line up. Starting at a 21 SCFM charging rate, Bauer offers models that will produce up to 60 SCFM at 5000 PSI.
Engine Driven - HP Compressor
Closed-loop water-cooled diesel engineBreathing air purification system (see chart)
Modern designBauer plc based controller with four line text dis-playNema 4 rated enclosureCompressor low oil pressure and high temp. Safety shutdownsAutomatic condensate drain system with non-cor-rosive condensate reservoir and integrated float switch (automatic “full” indication and compressor shutdown)Interstage pressure gaugesElectric start package including electric clutch and speed control solenoid
••••
••
•
••
Standard Features
Options
Audible alarms for safety shutdownsCo monitor
••
ModelCharging
Rate SCFM*
FAD** HP RPMDimensions
L-W-HWeight
(LBS) Purification
5000 PSI Service
K20-G 21 17.5 20 1�00 6� x 49 x 46 1�00-�750 P5
K20-D 21 17.5 27 1�00 6� x 49 x 46 1�00-�750 P5
K26-D 26.4 22 27 1�50 6� x 49 x 46 1�00-�750 P5
K42-D 42 �5 44 1�00 95 x 52 x 49 1�00-�750 P10
K60-D 60 50 60 1�50 112 x 52 x 5� 1�00-�750 P12 SECURUS
6000 PSI Service
H1�-G 1� 10.8 1�.5 1420 6� x 49 x 46 1�00-�750 P2 SECURUS
H1�-D 1� 10.8 18 1420 6� x 49 x 46 1�00-�750 P2 SECURUS
H18-D 18 15 27 1�25 6� x 49 x 46 1�00-�750 P5 SECURUS
H25-D 25.2 21 27 1�00 6� x 49 x 46 1�00-�750 P5 SECURUS
H�5-D �5.9 29.8 44 1200 95 x 52 x 49 1�00-�750 P10 SECURUS
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.
**Compressor capacity referenced to standard inlet conditions.
G=Gasoline Engine
D=Diesel Engine
Dimensions and weight are approxi-mate and are subject to change.
841253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
COMPRESSORS - HIGH PRESSURE
If you need a high pressure compressor that can with-stand harsh offshore environments, then Bauer has a compressor to suit that need. The Offshore compressor has been specifically designed to weather the harshest elements.
Offshore - HP Compressor
Bauer breathing air purification systemTefc motorNema 4 electrical enclosureLow oil pressure/high temp shutdown switchEmergency stop push buttonAutomatic condensate drain system w/non-cor-rosive condensate reservoir and integrated float switchGauge panelLifting lugs integrated to frameInlet particulate filterOn/off and final air pressure switchPowder coated frame and enclosureStainless steel tubing, fittings and fasteners
••••••
••••••
Standard Features
Closed loop water-cooled dieselElectric clutch and speed control solenoidSpark arrestor mufflerAnti-vibration mountingHigh pressure pipe fittings
•••••
Diesel Engine Models
ModelCharging
Rate SCFM*
FAD** HP RPMDimensions
L-W-HWeight
(LBS) Purification
5000 PSI Service
O20-D 21 17.5 27 1�00 62.5 x 57.5 x 48.5 1100-1200 P5
O20-E� 21 17.5 15 1�00 62.5 x 57.5 x 48.5 1100-1200 P5
O26-D 26.4 22 27 1�50 62.5 x 57.5 x 48.5 1100-1200 P5
O26-E� 26.4 22 20 1�50 62.5 x 57.5 x 48.5 1100-1200 P5
6000 PSI Service
O10-D 9.7 8.1 10 1180 62.5 x 57.5 x 48.5 1100-1200 P2
O10-E� 9.7 8.1 7.5 1180 62.5 x 57.5 x 48.5 1100-1200 P2
O1�-D 1� 10.8 18 1420 62.5 x 57.5 x 48.5 1100-1200 P2
O1�-E� 1� 10.8 10 1420 62.5 x 57.5 x 48.5 1100-1200 P2
O25-D 25.2 21 27 1�00 62.5 x 57.5 x 48.5 1100-1200 P5
O25-E� 25.2 21 20 1�00 62.5 x 57.5 x 48.5 1100-1200 P5
Options
Purification upgradeCo monitorSECURUSHydrogen sulfide monitor with alarm
••••
*Based on recharging an 80 cubic foot tank from 500 to �000 PSIG.
**Compressor capacity referenced to standard inlet conditions.
E1 = Single Phase Electric, 2�0 VAC/60 Hz.
E� = Three Phase Electric, 2�0/460 VAC/60 Hz.
Other voltages available on request.
Dimensions and weight are approxi-mate and are subject to change.
85202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS - HIGH PRESSURE
This system is Bauer’s new method of automatically cascading your air storage system. It utilizes a patent pending manifold block with integral valve bodies. Couple this with a commercially available PLC controller and you have the simplest cascade system available today!
Auto Cascade System
Four to one safety factor12 Or 115 v operatedManifold integrationCorrosion resistant high strength aluminum alloy mani-fold blockProgrammable logic controller No adjustable shuttle valvesLed indication to determine which cylinder is being usedPressure sensing transducersBypass circuit
••••
•••
••
Standard Features
Bauer offers the only independently tested containment fill stations which were found to protect the operator from overpressure and fragmentation per NFPA 1901. Formed plate steel and fewer welds help maintain structural integrity while at the same time reducing size and weight. The ergonomic “easy load” door design allows the operator to open and close the door with less than 18 LBS. of force without hyper-extended hand and wrist movements. Available in Single, Dual and Triple Cylinders.
Containment Fill Station
Complete with cylinder scuff guard, scba fill con-nection, fill hose and bleed valveFill control panel with adjustable regulator, relief valve, manual control valve and pressure gauge for each fill position (stationary version only)Cfs m versions designed for use with remote air distribution panelMounting base is standard on stationary and op-tional on the mobile version.Convenient door handle actuation
•
•
•
•
•
Standard Features
861253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Bauer Air Purification Systems purify high pressure air to a quality that meets or exceeds the requirements of CGA Pamphlet G-7, Compressed Air for Human Respiration, ANSI/CGA G-7.1, Commodity Specification for Air, Grade E, and all other recognized standards for breathing air.
PurificationSystem
Air Processing Capability+
P0** �,200 cu.ft
P2 40,000 cu.ft
P2 SECURUS 67,000 cu.ft
P5 90,000 cu.ft
P5 SECURUS 150,000 cu.ft
P10 140,000 cu.ft
P10 SECURUS 2�0,000 cu.ft
P12 SECURUS* 420,000 cu.ft
P14 SECURUS* 650,000 cu.ft
PurificationSystem
Air Processing Capability+
P�1** 11,760 cu.ft
P41 28,700 cu.ft
P41 SECURUS 47,000 cu.ft
P42 64,000 cu.ft
P42 SECURUS 107,000 cu.ft
P4� 100,000 cu.ft
P4� SECURUS 164,000 cu.ft
* P12 and P14 only available with SECURUS.+ Air Processing capability based on standard inlet conditions, 68oF., a pressure of 14.70 PSIA and a relative humidity of 36%.**5000 PSI Maximum Pressure. Triplex Design is not incorporated on a panel.
SECURUS II ensures 100% utilization of the air processing cartridges because the moisture sensor is embedded directly into the molecular sieve. The Securus cartridge, with its moisture sensor, is the last cartridge in the air processing system. SECURUS II is powered from the PLC Control System and provides for automatic warning and shutdown when the SECURUS cartridge becomes saturated. The SECURUS II can be mounted locally to the SECURUS cartridge chamber or to the compressor’s control panel. SECURUS II is available for working pressures from 2000-6000 PSIG and flow rates to 125 SCFM.
Air Purification Panel - High Pressure
Air Purification - SECURUS II
COMPRESSORS - HIGH PRESSURE
87202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
COMPRESSORS - HIGH PRESSURE
Bauer Air Storage Systems meet the code requirements of either the Department of Transportation or the American Society of Mechanical Engineers. Storage systems are available with 5000 PSI and 6000 PSI DOT cylinders or 5250/7000 PSI dual rated ASME cylinders. Optional mounting racks are available.
Bauer also offers several fill panels for these units. See below for full list.
Working Pressure 5000 PSI 6000 PSI 5000 PSI 6000 PSI
Test Pressure 7500 PSI 9000 PSI 7875 PSI 10500 PSI
Diameter 9 �/8” 9 9/�2” 9 5/8” 9 5/8”
Height 55” with Valve 55” with Valve 54” without Valve 54” without Valve
Weight 175 LBS 188 LBS 400 LBS 400 LBS
Cylinder Valve CGA DF Standard Valve Supplied Standard Valve Supplied
Finish Primer and Topcoat Primer and Topcoat Primer and Topcoat Primer and Topcoat
Fill Panels:BFP - Basic fill panel designed for conversion to a cascade panel. Suitable for wall mounting or for attachment to DOT or ASME storage cylinders. Includes an adjustable regulator, inlet/outlet gauges, relief valve, fill control valves and inlet port for storage refill. Available with two and four fill whips.
BFP/CSCD - The designation for Cascade fill includes a shut-off valve and gauge for up to four banks of storage. This feature can be factory installed or easily added by the user later.
881253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
COMPRESSOR OIL
BTI-�0 Food Grade Breathing Air Compressor Oil is a superior performance lubricant specifically designed to lubricate breathing air compressors. BTI-�0 has extremely low volatility, excellent hydrolytic stability, very high flash point, and NON-TOXIC formulation that contributes to safer operation of breathing air compressors. Advanced additives incorporates superior anti-wear properties resulting in truly extraordinary compressor wear protection. It also provides for clean, carbon resistant operation of breathing air compressors.
Bauer Compressor oil is a synthetic oil designed to handle the extreme work loads of high pressure compressors. The performance of your compressor depends on basic maintenance. Bauer HP Compressor Oil has been tested by Bauer to meet or exceed all industry standards. Using this lubricant assures peak performance of your Bauer Compressor with minimal piston, cylinder and valve wear.0024 - 1 Gallon
Bauer HP Compressor Oil
BTI 6221 Oil is a high performance lubricant specifically designed to lubricate high pressure and low pressure breathing air compressors. Designed to meet the needs of HP/LP systems, BTI6221 meets USDA H-1 requirements for lubricants with incidental food contact and is suitable for NITROX up to 40% Oxygen. The formulations low volatility, excellent hydrolytic stability, very high flash point and non-toxic/non-hazardous design contribute to safer operation of breathing air compressors. BTI 6221’s advanced additive system incorporates superior anti-wear properties resulting in truly extraordinary compressor wear protection. This system also provides for clean, carbon resistant operation within the compressor.
2 piece 6.5mm farmer john style suit. Made of softstretch® neoprene for comfort and warmth.Q283 (M, L, XL, XXL)
2 piece, 5mm suit made from 4-way flex neoprene makes these suits extremely comfortable. If you’re look-ing to purchase a custom suit, try one of these first.FLEX-282 (M, L, XL, XXL)
Heavy duty rubber fins, great for commercial work.FN203 (L)FN204(XL)
Durable Akona hard sole booties with zip up side.AKBT334-(size 9, 10, 11, 12)
Heavy neoprene rubber construction with steel toe and steel shank.86304 (specify size on order)
Bottom Boots
6.5mm neoprene wetsuit. Can be used alone or with Aqualung farmer john.1000837-L, 1000838-XL, 1000839-XXL
Aqualung Shorty
6.5mm neoprene wetsuit. Can be used alone or with Aqualung shorty above.1000845-L, 1000846-XL, 1000847-XXL
Aqualung Farmer John
Aqualung Caravelle fin. Great adjustable fin without the cost of high end brands.62822-Regular Size, 62823-Giant Size
Caravelle Fins
Heavy-Duty cordura bib overalls for use with both wetsuits and drysuits. Includes oversized pockets on the thighs and chest.OVERALLS
Bib Overalls
Heavy-duty cordura chaps with thigh pockets designed to wear over a wetsuit or drysuit.CHAPS
Chaps
91202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
DIVERS APPAREL & EQUIPMENT
The DUI hot water suit is made from heavy duty 7mm neoprene and has a heavy duty valve and tubing for hot water distribution. 190010Med-Reg, Med-Tall, Lg-Reg, Lg-Tall, XL-Reg, XL-Tall, 2XL-Reg, 2XL-TallCoupler: BPHC-8-8F
This suit is based around a unique heavy anodized aluminum water distribution valve, with its unique �60 degree stainless steel quick connector. The water flows along an anti-kink rubber tubing profile designed by and unique to Northern Divers.Features:
Reinforced knee and shin pads.2 x deep thigh pocketsHeavy duty zipperFleece lined neckNeoprene shoulder epaulettes - so harness won’t slide offLight reflective strips
ND-HWSSizes: (Please see drysuit sizing chart on following page) S, M, ML-T, L, L-Relaxed, XL, XL-T, XL-Relaxed, XXL, XXL-Relaxed, XXXL, XXXL-RelaxedCoupler: BPHC-8-8F
•
••••
•
Lightweight denim hot water suit for use over thermal suits or wetsuits. Adds wetsuit protection while maintaining maneuverability.AM-HWSSizes: S, M, L, XL, XXL
Fleece and Lycra full body suit for use under Hot Water suits.ND-HWUSizes: S, M, L, XL, XXL
Heavy neoprene gloves with velcro to attach to hot water suits.ND-HWGSizes: S, M, L, XL
Neoprene boots with velcro to attach to hot water suits.ND-HWBSizes: S, M, L, XL
AM Hot Water Suit
Hot Water BootsHot Water Gloves
Thermal SuitDUI Hot Water SuitND Hot Water Suit
921253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
DIVERS APPAREL & EQUIPMENT
Northern Diver Heavy-Duty Drysuit with steel-toe option. This suit is a heavy grade rubber material with reinforced crotch, knees and elbows for maximum durability. The suit has a high resistance to chemical and biological permeation, triple welded seams and can be fitted with a neck ring for most helmets and dry-gloves to make it suitable for haz-mat diving.HD1600ST-size
Northern Diver commercial work suit is a great dry-suit for light salvage and moderate commercial work. It comes with lightweight boots for slipping swim fins over and is available in front or back entry. HD1050B-size
Northern Diver introduces a revolutionary concept in dry glove systems designed for latex and neoprene wrist seals.Features
Revolutionary locking mechanism for quick engagement or release without assistance2 sets of pinch rings to fit varying material thicknessDurable PVC gloves with textured fingers and palm for enhanced gripResistant to many contaminating agentsRemovable fleece liners for comfortLocking tool for dry-suit fitting
HD4600 -size (M, L, XL)
•
•
•
•
••
Northern Diver Drysuit Options:Genesis Helmet YokeDesco Helmet YokeSteel Toe or Swim BootsDry Glove System (installed)Relief ZipperBack or Front Entry Neoprene or Latex Hood
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Commercial diving rated 7mm neoprene suit with an outer coating of Harvey’s Dino-Hide® for abrasion resistance.SPL1013V Med, Med-Lg, Lg, XL, 2XL
Light duty rated 6.5mm dry-suit for inspection or sport diving.SSNT1013VMed, Med-Lg, Lg, XL, 2XL
Harvey’s Aqua CapsuleHarvey’s Work CapsuleHarvey’s 16oz Fleece Un-dergarment is a one-piece jumpsuit. Includes hand warmer pockets and front zip closure. This garment is engineered to “wick” mois-ture away from your skin. PW-190Sizes: S, M, L, XL, XXL
Fleece Woolies Harvey’s fleece socks are an addition to the woolies using the same 16oz fleece material. PW-710Sizes: S, M, L, XL,
Fleece Socks
DIVERS APPAREL & EQUIPMENT
Thermalux® undersuits from Northern Diver offer a lightweight solution to keeping warm. the micro-fiber and fleece layers help retain body heat without the bulk associated with many other thermal undersuits. Ergonomically designed stretch leg and foot stirrups ensure the garment stays in place during use. Designed comfort zone panels consisting of elastic lycra fleece structural panels ensure the fit and comfort compliment each other.THERMALUX - size(XS, S, M, ML, MLR, L, LR, XL, XLR, XXL, XXLR, XXXL)
ND Thermalux Undersuit
Metalux® undersuits from Northern Diver has the enviable reputation of being one of the most effective light-weight, high performance insulating materials available, designed to reduce air movement and reflect thermal radia-tion. Metalux® retains its impressive insula-tion qualities when wet or compressed and the quilt construction retains ther-mal integrity throughout the life of the garment.Warning: it is possible to become too hot. Choose your Metalux® undersuit carefully! Ensure that the Metalux® �00 is used only in extreme conditions.METALUX - style - sizeTemperate - S, M, MR, ML, MLR, MLT, L, LR, XL, XLR, XLT, XXL, XXLR, XXXL, XXXLR Arctic - Same As Above (See Warning)
ND Metalux Undersuit
941253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
DIVERS APPAREL & EQUIPMENT
7 D-Ring harness, with backpack. Chest mounted rings for added con-venience. Stainless rivets and a D-ring mounted to the backpack are standard. Chest Strap is optional.ATL-BHBP7DCS-Size (M, LG, XL)Model shown with optional chest strap
Standard “H” type harness for the standby diver. STH-SB-4D (M, LG, XL)
This vest combines safety and functionality into one unit. Features 7 D-Rings, Leg Straps, Weight pock-ets with rip cord for quick ditching, hard mount or soft mount (lace up) for bailout bottle. The vest is made from durable materials for long product life.R-VEST (L or XL)
Full body harness with back-pack, chest strap, leg straps, and 7 D-rings. The harness made of heavy duty nylon and stainless rivets.ATL-16510 (M, L, XL)
For use with bailout harnesses.JS-800
Standby Harness
Northern Divers R-Vest 7 D-Ring HarnessFull Body Harness
Jocking Strap Heavy duty stainless steel cara-biners in different sizes. Available with locking sleeve and eye.From left to right.S0181-0120L - 4-�/4” OAL S0120-0120 - 4-�/4” OAL S0120-0100 - �-7/8” OALS0120-0080 - �-1/8” OAL
Carabiner
Stainless steel quick links in different sizes. From left to right.00330670 - �” OAL 00330667 - 2” OAL00330665 - 1-�/8” OAL
Quick Link
2-7/8” width stainless steel D-rings. DR-2
D-Rings
Stainless steel snap shackles for your har-ness. Available with or without a lanyard.RF6210 - Shackle RF-6210-L - Shackle and Lanyard
Snap Shackles
95202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
DIVERS APPAREL & EQUIPMENT
Brass snaps with swivel eye. Sizes 2 and � available.From left to right.M1174-003 - 4-1/2” (#�) OAL M1174-002 -�-9/16” (#2) OAL
Strong stainless steel shackles for knives or your harness.RF634 - �/16” RF635 - 1/4”
Brass dust cap for male oxygen adapters. Includes chain and clip.W-DC-B7
1/8” 1st stage w/o-ring x O2 adapter.W230
ShacklesBrass Snap 1st Stage O2 Adapter
Brass Dust Cap
2” webbing for use with weight belts. Cut to length and priced per foot.WB01-BLUEWB01-BLK
Scuba lead for 2” webbing. SCWT2 (2lb)SCWT3 (3lb)SCWT4 (4lb) SCWT5 (5lb)SCWT6 (6lb) SCWT8 (8lb) SCWT10 (10lb)
Cast bronze buckle with hardware for commercial belts.CBB-02
Stainless nut for weight screws.CN-05
Stainless steel backing plate for commercial weights.CBP-03
Heavy duty 48” rubber strap for commercial weight belts.CBB-48
Shoulder straps for heavy belt with keepers.CSS-04
Shoulder StrapsScrewsNut
Backing PlateCommercial BuckleHeavy Belt Strap
DIVERS APPAREL & EQUIPMENT
ADC Log Book for com-mercial divers.BOOK-LOG - Divers Log BookBOOK-SUPR - Supervisors Log Book
Log Books Oakton stopwatch for keeping track of dive time.WD-35002-10
Stop Watch Oakton timer with count up feature for keeping track of bottom time.WD-35001-75
Large Display Timer
97202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Meets ANSI standards for head protection. Available in red or white with or without full brim.Regular: HHSTD-R (Red) HHSTD-W(White)Full Brim: HHFB-R (Red) HHFB-W(White)
USCG approved work vest.WV10
Neon green glowing light stick. 8-12 hour life.GS-12
Vinyl bags for your personal gear. Available with dividers. Not waterproof. BAG-GB-SM BAG-GBD-MED BAG-GBD-SM BAG-GB-LG BAG-GB-MED BAG-GBD-LG
Large vinyl bags with internal pockets for your helmet and spares.BAG-HB-STD
Deluxe vinyl bag for storing your helmet.BAG-HB-DLX
Mythos Mask Scuba mask with low profile and single lens.401312 - Blue401310 - Clear
Visage Mask Suunto Compass with large, easy to read dial.41108
Wrist Compass
Medium 12x12x28
Small 10x10x24
Large 14x14x�0
Vinyl rod pouch for burning or welding rods.RP01
Rod Pouch Mesh bags for use underwater.GB41 - (15” x 20”)GB43 - (18” x �0”)GB45 - (24” x �6”)
Mesh Bags
981253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
DIVERS APPAREL & EQUIPMENT
A new option for divers wanting the brightness of LED’s with hours of life. 2010C
The choice of divers world wide. Water resistant to 500 FSW. � C Cell batteries included.2000C
A small and very bright light for use underwater.1900C
Pelican waterproof strobe light for personal use.2130C
Pelican waterproof flashlight for mounting on a cap or work vest.2140C
The standard of underwater lights. 4 C Cell batteries included.SL4
Pelican Super Sabre
Hat Mounted LightStrobe Light
Underwater Kinetics SL4Pelican Mity Lite
Pelican Super Sabre - LED
99202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
DIVERS APPAREL & EQUIPMENT
Straight blade stainless steel knife with serrated and straight edge. In-cludes sheath.KN83
420 stainless steel serrated blade with high impact plastic handle and blunt tip.KN32
The Pacific Salt is made from H1 precipitation-hardened steel which makes it impervious to rust pitting and salt. Available in Yellow and Black.C91PYL (Straight Blade, Yellow)C91SYL (Serrated Blade, Yellow) Length Open: 8 5/8”Length Closed: 4 15/16”
The “Salt” series of Spyderco knives use hardened steel which makes it rust and salt proof. The C89 is the popular “Atlantic Salt” known for its durability and blunt tip. Available in Yellow and Black.C89SYL (Serrated Blade, Yellow)Length Open: 8 1/4”Length Closed: 4 5/8”
The Salt series of spyderco are made from H1 precipitation-hardened steel which makes it impervious to rust pitting and salt. Available in Yellow and Black.C88SYL (Serrated Blade, Yellow)Length Open: 7”Length Closed: 4”
The Tasman Salt uses the same steel as other salt series knives, but this one is in the hawkbill blade that is popular for rope and net cutting. Available in Yellow and Black.C106SYL (Serrated Blade, Yellow)C106SBK (Serrated Blade, Black) Length Open: 6 13/16”Length Closed: 4”
Scuba Knife Stainless Steel Knife
Spyderco C106 Tasman SaltSpyderco C88 Salt I
Spyderco C89 Atlantic SaltSpyderco C91 Pacific Salt
Rigging: Snap, Brass:M1174-002Shackle, SS:RF634
1001253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
DIVERS APPAREL & EQUIPMENT
2.5” mylar ear speakers. Right speaker comes with 12” wire and the Left with 16.25” wire.SP-2.5-R - 12” WireSP-2.5-L - 16” Wire
Sealed and wired, this micro-phone is a direct replacement for a number of helmets and masks on the market today. LOC-61 300-394 - 14” WireLOC-61 400-394 - 9” Wire
5-Way® binding post for communications wire. Please specify Red or Black in color.01-1032-1-0310 - Black01-1032-1-0312 - Red
It is one of the safest and most reliable type of con-nector, since it cannot be removed unless mounting screw is removed.RV14-10C
Ear Speakers
TapeWire Eyes
Binding PostMicrophone
High grade adhesive tape for the assembly and repair of just about anything. Used in every industry from the most intricate scientific processes to the most mundane tasks.Duct Tape: AC45 (Black)Duct Tape: NAT-NC168 (Grey)
Duct Tape �M invented vinyl electrical tape and sets the industry standard for quality with a tape for almost every application. Comes in a range of color. 3M-1700C-color(specify color of electrical tape on order)-Black = Black -R = red -G = Green -B = Blue -W = White -Y = Yellow -O = Orange
101202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
DIVERS APPAREL & EQUIPMENT
1021253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Material: Special Neoprene, MoldedContacts: Copper Alloy, Hard Gold Plated per ASTM-B488Voltage Rating: 600 VDCPressure Rating, Mated: up to 20,000 PSI
Seacon/Brantner In-Line Connectors - Male
RMG-1-MP1#10
Cable: 18/1SO or Equivalent
RMG-2- MP1#101#14
Cable: 18/2SO
RMG-�-MP1#102#14
Cable: 18/3SO
RMG-4-MP1#10�#16
Cable: 18/4SO
RMK-5-MP1#104#16
Cable: 18/5SO
RMK-6-MP1#105#16
Cable: 18/6SO
Material: Special Neoprene, MoldedContacts: Copper Alloy, Hard Gold Plated per ASTM-B488Voltage Rating: 600 VDCPressure Rating, Mated: up to 20,000 PSI
RMG-1-FS1#10
Cable: 18/1SO or Equivalent
RMG-2- FS1#101#14
Cable: 18/2SO
RMG-�-FS1#102#14
Cable: 18/3SO
RMG-4-FS1#10�#16
Cable: 18/4SO
RMK-5-FS1#104#16
Cable: 18/5SO
RMK-6-FS1#105#16
Cable: 18/6SO
Seacon/Brantner In-Line Connectors - Female
ELECTRICAL
10�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
ELECTRICAL
Fits 1, 2, 3, and 4 Pin ConnectorsFemale models will mate to bulkhead connectors
K-FLS-D K-MLS-D
Fits 5, 6, 7, 8, and 9 Pin ConnectorsFemale models will mate to bulkhead connectors
Seacon/Brantner Locking Sleeves - Male and Female
Seacon/Brantner Bulkhead ConnectorsMaterial: Glass Reinforced EpoxyContacts: Copper Alloy, Hard Gold Plated per ASTM-B-488Pressure Rating, Mated: Up to 20,000 PSI
G-FLS-P G-MLS-P
1041253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
ELECTRICAL
# of Pins Male Female2 RMG-2-MPD RMG-2-FSD
� RMG-�-MPD RMG-�-FSD
4 RMG-4-MPD RMG-4-FSD
5 RMG-5-MPD RMG-5-FSD
Molded neoprene plugs to protect or seal off con-nectors from the elements.
Additional plugs available upon request
Alternate configurations are available.Please call us!
Dummy Plugs
Chamber Penetrator, 1/2” This penetrator allows cable assemblies to pass through a bulkhead without the use of connectors. The stainless steel body is pressure rated to 10,000 PSI and is water-blocked with a glass reinforced epoxy insert. This assembly comes with six feet of #18 AWG SO cable (4 or 6 wires) and can be molded to any connector up to 4 or 6 pins or it can be left bare for other applications.4 Wire - 1/2SS-46 Wire - 1/2SS-6
105202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
ELECTRICAL
FORK TERMINALS Description Wire Size Stud or Tab Size # Per Pack Part NumberBlock Fork Terminal 22 - 18 AWG Stud Size 6 100 �M-BFV18-6C
Submersible Electrical Enclosure Most submersible electrical enclosures are large, expensive and are mainly designed for the ROV and AUV market. There are few smaller submersible enclosures that are built to withstand the rigors of saltwater exposure. We took this into consideration and are proud to offer the BTI-SEE, the industry’s first wet-bell specific electrical enclosure. The BTI-SEE is machined from a solid block of aluminum and features an o-ring sealed polycarbonate lens. It is designed to be filled with non-conductive oil in order to resist pressure changes while allowing
quick visual inspection of electrical connections. We have machined eight 1/2” MPT ports in the body which can be plugged if not in use or fitted with bulkhead penetrators* that seal off any through hull wiring**. Four extra ports are used for filling and draining the oil from the housing. Inside of the body, we’ve mounted a 12 circuit barrier strip rated to 20A/300V and is capable of handling a maximum of 12 AWG (22 AWG minimum).
*Plugs and penetrators sold separately.**Some wire can potentially wick oil out of the enclosure. Seal all wiring at the jacket.
12-0034-EE
1081253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
ENGINES
Yanmar’s single-cylinder, air-cooled direct injection diesel engines are EPA & CARB exhaust emission compliant and utilize a counter-balancing system for smooth, high-speed operation. Multiple PTO shaft options are available along with electric or recoil starting.
Keeping with the tradition of compact design, the new LV series is simple to install. It fits in cramped spaces without sacrificing power and performance. Yanmar’s proprietary direct injection technology allows the engine to sip rather than gorge on fuel. This means lower running cost in the world of rising fuel prices.
Yanmar L100 Series Engines
Model L100V SeriesEmissions Regulation EPA Tier 4Engine Type Air Cooled, 4 Cycle, Vertical CylinderFuel DieselNo. of Cylinders 1Bore x Stroke 86mm x 75mmCombustion Type Direct InjectionTotal Displacement 4�5 ccAspiration Natural AspirationValves Per Cylinder 2Rated Speed �600 RPMNet Intermittent HP 9.1 HP @ �600 RPMNet Continuous HP 8.� HP @ �600 RPMFuel Tank Capacity 4.7 LitersOil Capacity 1.60 LitersAir Cleaner Dry-Type w/Paper ElementLength 16.2 in (412mm)Width 18.6 in (472mm)Height 19.4 in (49�mm)Dry Weight (approx) 107 LBS (5�.5 kg)
109202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
ENGINES
The Kubota OC series is an unique engine that has light-weight and compact features of an air-cooled engine together with the low noise, durability and clean exhaust emission of a water-cooled diesel engine. With ACTV (Advanced Cooling Three Vortex) system, the cylinder block is air cooled whereas the combustion area of the cylinder head is oil-cooled.
The OC 95 engine complies with EPA Tier 4 emissions regulations. These are the most stringent emissions regulations in the world in this class. It offers seamless transition from Tier 2 to Tier 4 by totally maintaining the same performance and physical characteristics of the previous Tier 2 engines.
Kubota OC95 Diesel Engine
Model OC95-E3
Emission Regulation EPA Tier 4
Type 4 Cycle Oil-Air Cooled Diesel
No. Of Cylinders 1
Bore in. (mm) �.27 (8�)
Stroke in. (mm) �.0� (77)
Displacement cu.in (L) 2�.59 (0.416)
Aspiration Naturally Aspirated
Max. Speed RPM �600
Output:Net Intermittent
kW 7.0
HP 9.4
PS 9.5
Oil Pan Capacity Gal. (L) 0.44 (1.7)
Starter Capacity V-kW 12 - 1.2
Alternator Capacity V-A 12 - 4.0
Length in. (mm) 19.80 (50�)
Width in. (mm) 17.80 (452)
Height in. (mm) 19.72 (501)
Dry Weight lb (kg) 12� (56)
1101253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
The Kubota05 Series is an established leader in its horsepower range and has been the preferred power source of various industrial equipment manufacturers. It complies with EPA Tier 4 emissions regulations which are the most stringent emissions regulations in the world in this class. It accomplishes this through an improved TVCS (Three Vortex Combustion System). This system has been optimized to achieve a 50% lower particulate matter (PM) level. The D1005 engine offers a seamless transition from Tier 2 to Tier 4 by maintaining the same footprint and hardware mounting points with only slight performance changes from the Tier 2 engine.
Must choose at time of order:Air start or electric start w/key switchStub shaft or hydraulic pump adapter
••••
••••••••
•
•
Engine Includes
BatteryBattery Box
••
Options
Model shown with hydraulic pump adapter.
111202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
ENGINES
Model D1703
Emission Regulation Interim Tier 4
Type Vertical 4-Cycle Liquid Cooled Diesel
No. Of Cylinders �
Bore in. (mm) �.4� (87)
Stroke in. (mm) �.64 (92.4)
Displacement cu.in (L) 100.5 (1.647)
Aspiration Naturally Aspirated
Max. Speed RPM 2800
Output:Net Intermittent
kW 26.1
HP �5.0
PS �5.5
Direction of Rotation Counterclockwise
Oil Pan Capacity Gal. (L) 1.48 (5.6) US / 1.85 (7.0) EU
Starter Capacity V-kW 12 - 1.4
Alternator Capacity V-A 12 - 40
Length in. (mm) 22.5 (572.1)
Width in. (mm) 19.6 (499.0)
Height 1 in. (mm) 25.� (64�.0) US / 26.8 (679.5) EU
Height 2 in. (mm) 9.0 (229.�) US / 10.5 (266.0) EU
Dry Weight lb (kg) �26.� (148.0)
The Kubota D170�M is well recognized for industrial applications. With numerous features such as built in solenoid, low fan position and single side serviceability, this engine offers excellent performance characteristics and application flexibility.
It complies with EPA Interim Tier 4 emissions regulations that are effective through the end of 2012. This engine also complies with EU Stage IIIA Requirements that are effective through 2012 and beyond. It does this through an improved TVCS (Three Vortex Combustion System). The airflow, combustion chamber and piston recesses were optimized to provide a 50% lower particulate matter (PM) level, the same stringent level as above the �7kW class (EPA Interim Tier 4 Option 1).
The D170�M engine offers a seamless transition from Tier 2 to Interim Tier 4 by maintaining the same footprint and hard mounting points with only slight performance changes from the Tier 2 engine.
Must choose at time of order:Air start or electric start w/key switchStub shaft or hydraulic pump adapter
••••
••••••••
•
•
Engine Includes
BatteryBattery Box
••
Options
1121253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
FILTRATION
Our Model BT3 filtration system consists of three canister assemblies. The canisters are made of powder-coated die cast aluminum with 1” flow ports. The first and second stage canis-ters are fitted with auto drains and the third has a manual drain. The unit is plumbed with brass fittings, stainless steel hardware, and stainless steel gauges. The assembly is mounted in an aluminum frame. The unit is shipped ready to use with #10 JIC male fittings on the inlet and outlet valves.
Two inlets & two outlets1/2” Brass ball valvesInlet/outlet gauges - 0-�00 stainless steel housing#10 JIC male hose adaptersBrass plumbingStainless steel hardware
Our Model BT2 filtration system is a dual canister assembly. The canister bowls are made of stainless steel with brass heads and come with manual drains. Both filter elements are disposable after use. The first stage element is a coalescing filter and the second stage is a activated charcoal filter. The unit is supported by an aluminum frame with rubber feet.
One air inlet, #10 JICTwo air outlets, 1/2” ball valves0-�00 Stainless steel outlet gauge Brass plumbingStainless steel hardware
Element SpecificationsStandard Unit Specifications
BT3: Three-Stage Filtration System
Element SpecificationsStandard Unit Specifications
BT2: Two-Stage Filtration System
First Stage: 5311-01Particulate (5 micron)
Optional: ELEM-5311-03
40 micron coarse bronze filter
Second Stage: 5351-03Oil Removal
Third Stage: 665-70Vapor and Odor
•
•
•
11�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
FILTRATION
First Stage: F17-800-A1-DA Filter assembly, Norgren, complete with filter and auto-drain. Includes: 5311-01 Filter element, 5 micron, fine bronzeOptional: 5311-03 Filter element, 40 micron, coarse bronze
Second Stage: F46-800-AO-MA Filter assembly, Norgren, com plete with filter and auto-drain.Includes: 5351-03 Filter element, oil removal, green foam
Third Stage: F46-827-MA-MA Filter assembly, Norgren, com plete with filter and manual drainIncludes: 665-70 Filter element, charcoal (water vapor and odor removal)
Filter element, oil removal, green foam5351-035 Micron, fine bronze
filter element5311-01
Filter element, charcoal (water vapor and odor removal)665-70
First Stage Housing: HS-RHB-786 Filter housing, 1st stage, with drainRequires: RWS-5 Filter element, coalescing, water and particulate removal
Filter element, coasescing, water and particulate removal RWS-5
Second Stage Housing: HS-RHB-786 Filter housing, 2nd stage, with drainRequires: MS97AC Filter element, coalescing, water and particulate removal
Filter element, charcoal, water vapor and odor removalMS97AC
Two Stage Filter (1st)
Three Stage Filter (3rd)Three Stage Filter (2nd)Three Stage Filter (1st)
Two Stage Filter (2nd)
1141253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
FITTINGS, ADAPTERS
Nut for use with oxy- gen barbs.W-7
Nut for use with JIC barbs.P-6BTX-B
Oxygen hose barb for 1/4” ID hose.W-C-19
2 5/8” Hose barb with JIC#6 end for �/8” ID hose.3/8Bx#6
Oxygen Nut
JIC6 Barb
Oxygen Nipple
JIC6 Nut
Size Description Part NumberO2 O2 x O2 Union, 200 PSI W-�0
1/4” O2 x 1/4” MPT, 200 PSI W-�2
�/8” O2 x �/8” MPT 200 PSI W-142
1/2” O2 x 1/2” MPT, 200 PSI 7ADR
Size Description Part Number1/4” (4) JIC4 x 1/4” MPT, �,�00 PSI P-4-4FTX-B
1/4” (6) JIC6 x 1/4” MPT, �,�00 PSI P-6FTX-B
�/8” (6) JIC6 x �/8” MPT, �,�00 PSI P-6-6FTX-B
1/2” (6) JIC6 x 1/2” MPT, �,�00 PSI P-6-8FTX-B
1/4” (8) JIC8 x 1/4” MPT, �,�00 PSI P-8-4FTX-B
1/2” (8) JIC8 x 1/2” MPT, �,�00 PSI P-8-8FTX-B
�/4” (8) JIC8 x �/4” MPT, �,�00 PSI P-8-12FTX-B
�/8” (10) JIC10 x �/8” MPT, �,�00 PSI P-10-6FTX-B
1/2” (10) JIC10 x 1/2” MPT, �,�00 PSI P-10FTX-B
�/4” (16) JIC16 x �/4” MPT, 2,�00 PSI P-16-12FTX-B
1” (16) JIC16 x 1” MPT, 2,000 PSI P-16FTX-B
Size Description Part Number4 JIC4 x JIC4, �,�00 PSI P-4HTX-B
6 JIC6 x JIC6, �,�00 PSI P-6HTX-B
8 JIC8 x JIC8, �,�00 PSI P-8HTX-B
10 JIC10 x JIC10, �,�00 PSI P-10HTX-B
2 5/8” Hose barb with oxygen end for �/8” ID hose.3/8BxO2
Oxygen Barb
Oxygen Reusable O2
Oxygen Adapters
JIC Unions
JIC Adapters
Gas CGA Number Part Number PressureAir CGA-�46 W-14-2 �000 PSI
Oxygen CGA-540 W-62 �000 PSI
Heliox CGA-580 W-92 �000 PSI
Nitrox CGA-296 W-29-2 �000 PSI
CGA NutsGas CGA Number Part Number Pressure
Air CGA-�46 W-14-� �000 PSI
Oxygen CGA-540 W-6� �000 PSI
Heliox CGA-580 W-15-� �000 PSI
Nitrox CGA-296 W-29-� �000 PSI
CGA Nipples
Reusable oxygen fit-ting for 1/4” ID hose.99R
115202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
FITTINGS, ADAPTERS
Reusable JIC#10 fit-ting for 1/2” ID hose.001-411-10BS
Reusable Oxygen fit-ting, specifically for 3/8” ID Gates hose.375B
JIC10 Reusable
Gates Reusable O2
Reusable oxygen fitting for temporary repair of Aquaflow hose.113R
Reusable O2 Reusable oxygen fit- ing for �/8” ID Armstrong hose.112R
Reusable O2Reusable JIC6 fitting, specifically for 3/8” ID Gates hose.375B-6
Gates Reusable JIC6
1/2” MPT x 1/2” ID Hose. 30-207
1/2” Hose Barb 1/2” MPT x 5/8” ID Hose. 30-209
5/8” Hose Barb 5/8” x 5/8” ID barbs. 30-303
5/8” Hose Splice 1/2” x 1/2” ID barbs. 30-302
1/2” Hose Splice
Reusable JIC4 fitting for 1/4” ID hose.99J-4
JIC4 Reusable
Reusable oxygen fit- ing for �/8” ID/.75OD hose.115R
Reusable O2
Most fittings listed are in stock. If you require something but do not see it here, please call us!
Reusable oxygen fit- ing for �/8” ID Lifestar hose.LDROXY-0606
Reusable O2 Reusable oxygen fit- ing for �/8” ID Lifestar hose.LDRFJS-0606
Reusable JIC6
1161253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
FITTINGS, ADAPTERS
Crowsfoot, 1/2” hose barb, galvanized.AM1
1/2” Crowsfoot
Crowsfoot, 1” hose barb, galvanized.AM11
1” Crowsfoot
Crowsfoot, 1” male pipe, galvanizedAM12
1” Crowsfoot
Crowsfoot, 5/8” hose barb, galvanized.AM5
5/8” Crowsfoot
Crowsfoot, �/4” hose barb, galvanized.AM6
3/4” Crowsfoot
Crowsfoot, 1/2” male pipe, galvanized.AM2
1/2” Crowsfoot
Crowsfoot, �/4” male pipe, galvanized.AM7
3/4” Crowsfoot
Crowsfoot, 1/2” female pipe, galvanized.AM3
1/2” Crowsfoot 1-1/4” Crowsfoot
Crowsfoot, 1-1/4” female pipe, galvanized.AM18
2” Crowsfoot
Crowsfoot, 2” female pipe, galvanized.AM28
P-AWR-4 - 2 Prong WasherD16AWR14 - 4 Prong Washer
WashersSafety Pin and Lanyard for all crowsfoot fittings.HOZ - 50401
Safety Pin and Lanyard
Most fittings listed are in stock. If you require something but do not see it here, please call us!
117202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
FITTINGS, COUPLERS & NIPPLES
In order From left to right:Part Number: P-B23N1/4” Coupler x 1/4” FPTPart Number: P-BH3C1/4” Nipple x 1/4” FPTPart Number: P-B23N-SL1/4” Coupler x 1/4” FPT w/ Sleeve LockPart Number: P-BH2C1/4” Nipple x 1/4” FPTPart Number: P-B22N1/4” Coupler x 1/4” MPT
In order From left to right:Part Number: GR-6021/4” Coupler x 1/4” FPT, Oxygen ServicePart Number: 02A1/4” Nipple x 1/4” FPTPart Number: GR-6011/4” Coupler x 1/8” MPT, Oxygen ServicePart Number: GR-6031/4” Coupler x 1/4” MPT, Oxygen Service
In order From left to right:Part Number: P-BH2-601/4” Coupler x 1/4” FPT, �700 PSIPart Number: P-BH2-611/4” Nipple x 1/4” FPT, �700 PSI
�04SS couplers (In order From left to right:)Part Number: P-SH2-621/4” Coupler x 1/4” FPT, 5000 PSIPart Number: P-SH2-631/4” Nipple x 1/4” FPT, 5000 PSIAlso available in �16 Stainless Steel.
In order From left to right:Part Number: P-SH4-621/2” Coupler x 1/2” FPT, 5000 PSIPart Number: P-SH4-631/2” Nipple x 1/2” FPT, 5000 PSI
HP Stainless Q.D.HP Stainless Q.D.HP Brass Q.D.
Brass LP Oxygen Sockets and PlugsLP Brass Couplers and Nipples
1181253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
FITTINGS, BRASS - LOW PRESSURE
Size Description Part Number1/4” �00 PSI 28-1�2
1/2” �00 PSI 28-1�4
�/4” 1500 PSI 2212-001
1” 1�00 PSI 2216-001
1 1/2” 1000 PSI 2224-001
2” 1000 PSI 22�2-001
Size Length Description Part Number1/4” 2” 2000 PSI 2204-200
1/4” 4” 2000 PSI 2204-400
1/4” 6” 2000 PSI 2204-600
1/2” 2” 1700 PSI 2208-200
1/2” 2 1/2” 1700 PSI 2208-250
1/2” �” 1700 PSI 2208-�00
1/2” 4” 1700 PSI 2208-400
1/2” 6” 1700 PSI 2208-600
�/4” 2 1/2” 1500 PSI 2212-�00
�/4” 6” 1500 PSI 2212-600
1” �” 1�00 PSI 2216-�00
1” � 1/2” 1�00 PSI 2216-�50
1” 4” 1�00 PSI 2216-400
1” 6” 1�00 PSI 2216-600
Size Description Part Number1/4” 1200 PSI 28-025
�/8” 1200 PSI 28-026
1/2” 1200 PSI 28-027
�/4” 1000 PSI 28-028
Size Description Part Number1/4” 1200 PSI 28-042
�/8” 1200 PSI 28-04�
1/2” 1200 PSI 28-044
�/4” 1000 PSI 28-045
Size Description Part Number1/8” 1200 PSI 28-058L
1/4” 1200 PSI 28-059L
�/8” 1200 PSI 28-060L
1/2” 1200 PSI 28-061L
�/4” 1000 PSI 28-062
Size Description Part Number1/4” 1200 PSI 28-212
�/8” 1200 PSI 28-21�
1/2” 1200 PSI 28-214
�/4” 1000 PSI 28-215
1” 1000 PSI 28-216
Hex Nipples
Couplers
Crosses
Tee (Female)
Nipples
Close Nipples
Most fittings listed are in stock. If you require something but do not see it here, please call us!
119202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
FITTINGS, BRASS - LOW PRESSURE
Size Description Part Number1/8” 1200 PSI 28-156
1/4” 1200 PSI 28-157
�/8” 1200 PSI 28-158
1/2” 1200 PSI 28-159
�/4” 1000 PSI 28-160
1/4” 1200 PSI, 45o 28-2�1
1/2” 1200 PSI, 45o 28-2��
Size Description Part Number1/8” 1200 PSI 28-001
1/4” 1200 PSI 28-002
�/8” 1200 PSI 28-00�
1/2” 1200 PSI 28-004
�/4” 1000 PSI 28-005
Size Description Part Number1/8” 1200 PSI, Countersink 28-09�
1/4” 1200 PSI, Countersink 28-094
�/8” 1200 PSI, Countersink 28-095
1/2” 1200 PSI, Countersink 28-096
�/4” 1200 PSI, Countersink 28-097
1” 400 PSI, Countersink 44-6�5
1/4” 1200 PSI, Hex 28-202S
�/8” 1200 PSI, Hex 28-20�S
1/2” 1200 PSI, Hex 28-204S
�/4” 1000 PSI, Hex 28-205S
1” 1000 PSI, Hex 28-206S
1” 150 PSI, Square, Bronze 44-675
Size Description Part Number10 JIC x 1/2” MPT 650 PSI 28-780F
12 JIC x �/4” MPT 650 PSI 28-78�F
16 JIC x 1” MPT 550 PSI 28-786F
Size Description Part Number1/4” MPT x 1/8” FPT 1200 PSI 28-102L
�/8” MPT x 1/8” FPT 1200 PSI 28-104L
1/2” MPT x 1/4” FPT 1200 PSI 28-106L
1/2” MPT x �/8” FPT 1200 PSI 28-107L
�/4” MPT x 1/4” FPT 1000 PSI 28-109L
�/4” MPT x 1/2” FPT 1000 PSI 28-111L
1” MPT x 1/4” FPT 1000 PSI 28-112
1” MPT x 1/2” FPT 1000 PSI 28-114
1” MPT x �/4” FPT 1000 PSI 28-115
1 1/4” MPT x 1” FPT 150 PSI, Bronze 44-518
1 1/2” MPT x 1/4” FPT 150 PSI, Bronze 44-519
1 1/2” MPT x 1/2” FPT 150 PSI, Bronze 44-521
1 1/2” MPT x 1” FPT 150 PSI, Bronze 44-522
�” MPT x 1 1/2” FPT 150 PSI, Bronze 44-5�7
Elbows (Female)
Plugs
Elbows (Special)
Bushings
Elbows (Street)
Most fittings listed are in stock. If you require something but do not see it here, please call us!
1201253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Merit Brass is the nations leading manufacturer of brass, chrome-plated brass, stainless steel and aluminum fittings. They are a ISO2001:2000 company who continuously meets and exceeds all standards set for manufacturing.
Size Description Part Number1/4” 250 PSI, Square Head BS117A-04
�/8” 250 PSI, Square Head X117A-06
1/2” 250 PSI, Square Head X117A-08
�/4” 250 PSI, Square Head X117A-12
1” 250 PSI, Square Head X117A-16
Size Description Part Number1/8” 250 PSI, Countersink BS118HC-02
1/4” 250 PSI, Countersink BS118HC-04
�/8” 250 PSI, Countersink BS118HC-06
1/2” 250 PSI, Countersink BS118HC-08
�/4” 250 PSI, Countersink X118-12
1” 250 PSI, Countersink X118-16
Size Description Part Number1/4” MPT x 1/8” FPT 250 PSI BS114-0402
�/8” MPT x 1/8” FPT 250 PSI BS114-0602
1/2” MPT x 1/8” FPT 250 PSI BS114-0802
1/2” MPT x 1/4” FPT 250 PSI X114-0804
1/2” MPT x �/8” FPT 250 PSI X114-0806
�/4” MPT x 1/8” FPT 250 PSI X114-1202
�/4” MPT x 1/4” FPT 250 PSI X114-1204
�/4” MPT x �/8” FPT 250 PSI X114-1206
�/4” MPT x 1/2” FPT 250 PSI X114-1208
1” MPT X 1/8” FPT 250 PSI X114-1602
1” MPT X 1/4” FPT 250 PSI X114-1604
1” MPT X �/8” FPT 250 PSI X114-1606
1” MPT X 1/2” FPT 250 PSI X114-1608
1” MPT X �/4” FPT 250 PSI X114-1612
1 1/4” MPT X 1/8” FPT 250 PSI X114-2002
1 1/4” MPT X 1/4” FPT 250 PSI X114-2004
1 1/4” MPT X �/8” FPT 250 PSI X114-2006
1 1/4” MPT X 1/2” FPT 250 PSI X114-2008
1 1/4” MPT X �/4” FPT 250 PSI X114-2012
1 1/4” MPT X 1” FPT 250 PSI X114-2016
1 1/2” MPT X 1/4” FPT 250 PSI X114-2404
1 1/2” MPT X �/8” FPT 250 PSI X114-2406
1 1/2” MPT X 1/2” FPT 250 PSI X114-2408
1 1/2” MPT X �/4” FPT 250 PSI X114-2412
1 1/2” MPT X 1” FPT 250 PSI X114-2416
1 1/2” MPTX 1 1/4” FPT 250 PSI X114-2420
2” MPT X 1/4” FPT 250 PSI X114-�204
2” MPT X �/8” FPT 250 PSI X114-�206
2” MPT X 1/2” FPT 250 PSI X114-�208
2” MPT X �/4” FPT 250 PSI X114-�212
2” MPT X 1” FPT 250 PSI X114-�216
2” MPT X 1 1/4” FPT 250 PSI X114-�220
2” MPT X 1 1/2” FPT 250 PSI X114-�224
2 1/2” MPT X 1/2” FPT 250 PSI X114-4008
2 1/2” MPT X �/4” FPT 250 PSI X114-4012
2 1/2” MPT X 1” FPT 250 PSI X114-4016
2 1/2” MPT X 2” FPT 250 PSI X114-40�2
�” MPT X 1/2” FPT 250 PSI X114-4808
Size Description Part Number1/8” 250 PSI X190-02
1/4” 250 PSI X190-04
�/8” 250 PSI X190-06
1/2” 250 PSI X190-08
�/4” 250 PSI X190-12
1” 250 PSI X190-16
FITTINGS, BRASS - LOW PRESSURE
Unions
Bushings
Plugs, Countersunk
Solid Plugs
121202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Merit Brass is the nations leading manufacturer of brass, chrome-plated brass, stainless steel and aluminum fittings. They are a ISO2001:2000 company who continuously meets and exceeds all standards set for manufacturing.
Size Description Part Number1/4” Elbow, 250 PSI X150-04
�/8” Elbow, 250 PSI X150-06
1/2” Elbow, 250 PSI X150-08
�/4” Elbow, 250 PSI X150-12
1” Elbow, 250 PSI X150-16
1 1/4” Elbow, 250 PSI X150-20
1 1/2” Elbow, 250 PSI X150-24
2” Elbow, 250 PSI X150-�2
Size Description Part Number1/4” Tee, 250 PSI X15�-04
�/8” Tee, 250 PSI X15�-06
1/2” Tee, 250 PSI X15�-08
�/4” Tee, 250 PSI X15�-12
1” Tee, 250 PSI X15�-16
1 1/4” Tee, 250 PSI X15�-20
1 1/2” Tee, 250 PSI X15�-24
2” Tee, 250 PSI X15�-�2
Size Description Part Number1/4” Street, 250 PSI X160-04
�/8” Street, 250 PSI X160-06
1/2” Street, 250 PSI X160-08
�/4” Street, 250 PSI X160-12
1” Street, 250 PSI X160-16
1 1/4” Street, 250 PSI X160-20
1 1/2” Street, 250 PSI X160-24
2” Street, 250 PSI X160-�2
FITTINGS, BRASS - LOW PRESSURE
Elbows
Street Elbows
TeesSize Description Part Number1/4” Coupling, 250 PSI X157-04
�/8” Coupling, 250 PSI X157-06
1/2” Coupling, 250 PSI X157-08
�/4” Coupling, 250 PSI X157-12
1” Coupling, 250 PSI X157-16
1 1/4” Coupling, 250 PSI X157-20
1 1/2” Coupling, 250 PSI X157-24
2” Coupling, 250 PSI X157-�2
Couplings
Size Description Part Number1/4” Cross, 250 PSI X154-04
�/8” Cross, 250 PSI X154-06
1/2” Cross, 250 PSI X154-08
�/4” Cross, 250 PSI X154-12
1” Cross, 250 PSI X154-16
1 1/4” Cross, 250 PSI X154-20
1 1/2” Cross, 250 PSI X154-24
2” Cross, 250 PSI X154-�2
Crosses
1221253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
FITTINGS, BRASS - HIGH PRESSURE
Size Description Part Number1/4” �900 PSI, Male P-1/4CR-B
�/8” �900 PSI, Male P-�/8CR-B
1/2” �900 PSI, Male P-1/2CR-B
�/4” 2600 PSI, Male P-�/4CR-B
1/4” �200 PSI, Street P-1/4CD-B
�/8” �000 PSI, Street P-�/8CD-B
1/2” 1900 PSI, Street P-1/2CD-B
�/4” 1900 PSI, Street P-�/4CD-B
1” 1200 PSI, Street P-1CD-B
1/4” �200 PSI, Female P-1/4DD-B
�/8” �000 PSI, Female P-�/8DD-B
1/2” 1900 PSI, Female P-1/2DD-B
�/4” 1900 PSI, Female P-�/4DD-B
1” 1200 PSI, Female P-1DD-B
Size Description Part Number4 JIC x 4 JIC ��00 PSI P-4HTX-B
6 JIC x 6 JIC ��00 PSI P-6HTX-B
8 JIC x 8 JIC ��00 PSI P-8HTX-B
10 JIC x 10 JIC ��00 PSI P-10HTX-B
12 JIC x 12 JIC ��00 PSI P-12HTX-B
Size Description Part Number1/4” �900 PSI P-1/4GG-B
�/8” �900 PSI P-�/8GG-B
1/2” �200 PSI P-1/2GG-B
�/4” 2600 PSI P-�/4GG-B
1” 1900 PSI P-1GG-B
Size Description Part Number1/4” MPT x 1/8” FPT �900 PSI P-1/4X1/8PTR-B
�/8” MPT x 1/4” FPT �900 PSI P-�/8X1/4PTR-B
1/2” MPT x 1/4” FPT �200 PSI P-1/2X1/4PTR-B
1/2” MPT x �/8” FPT �200 PSI P-1/2X�/8PTR-B
�/4” MPT x 1/4” FPT �700 PSI P-�/4X1/4PTR-B
�/4” MPT x �/8” FPT �700 PSI P-�/4X�/8PTR-B
�/4” MPT x 1/2” FPT ��00 PSI P-�/4X1/2PTR-B
1” MPT x �/8” FPT �000 PSI P-1X�/8PTR-B
1” MPT x 1/2” FPT �000 PSI P-1X1/2PTR-B
1” MPT x �/4” FPT 2700 PSI P-1X�/4PTR-B
Size Description Part Number1/4” �900 PSI P-1/4HP-B
�/8” �900 PSI P-�/8HP-B
1/2” �900 PSI P-1/2HP-B
�/4” �500 PSI P-�/4HP-B
1” �000 PSI P-1HP-B
Size Description Part Number1/4” �900 PSI P-1/4FF-B
�/8” �900 PSI P-�/8FF-B
1/2” �900 PSI P-1/2FF-B
�/4” �500 PSI P-�/4FF-B
1” �000 PSI P-1FF-B
Most fittings listed are in stock. If you require something but do not see it here, please call us!
Size Description Part Number1/4” �200 PSI, Female P-1/4MMO-B
�/8” �000 PSI, Female P-�/8MMO-B
1/2” 1900 PSI, Female P-1/2MMO-B
�/4” 1900 PSI, Female P-�/4MMO-B
1” 1200 PSI, Female P-1MMO-B
1/4” �200 PSI, Run P-1/4MRO-B
�/8” �000 PSI, Run P-�/8MRO-B
1/2” 1900 PSI, Run P-1/2MRO-B
Run-Tees bigger than 1/2” are stainless steel
MMO
DD
CR
CD
MRO
Tees
Elbows
Bushings
Collars
Plugs
Nipples
Unions
FF
HTX
PTR
GG
HP
12�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
FITTINGS, GALVANIZED - STEEL
Size Description Part Number1” 250 PSI 58-100
1 1/4” 250 PSI 58-120
1 1/2” 250 PSI 58-140
2” 250 PSI 56-160
2 1/2” 250 PSI 56-180
Size Length Description Part Number1/4” 2” 250 PSI PND-40840
1/4” 4” 250 PSI PND-40848
1/4” 5” 250 PSI 56-028
1/4” 6” 250 PSI 56-0�0
�/4” 2” 250 PSI 56-082
�/4” � 1/2” 250 PSI 56-085
�/4” 4” 250 PSI 58-086
�/4” 18” 250 PSI 56-250
�/4” 24” 250 PSI 56-251
1” � 1/2” 250 PSI 58-104
1” 8” 250 PSI 58-111
1” 18” 250 PSI 56-260
1” 24” 250 PSI 56-261
Size Description Part Number1” Elbow, 250 PSI 64-105
2” Elbow, 250 PSI 64-108
1” Street, 250 PSI 64-165
2” Street, 250 PSI 64-168
Size Description Part Number1” 250 PSI 64-775
1 1/4” 250 PSI 64-416
REDUCING COUPLERS
1 1/4’ X 1” 250 PSI 64-446
2” X �/4” 250 PSI 64-451
2” X 1” 250 PSI 64-452
2 1/2” X 2” 250 PSI 64-462
Size Description Part Number1” X 1/4” 250 PSI 64-510
1” X 1/2” 250 PSI 64-512
1” X �/4” 250 PSI 64-51�
1 1/4” X 1/2” 250 PSI 64-516
1 1/4” X �/4” 250 PSI 64-517
1 1/2” X �/4” 250 PSI 64-522
1 1/2” X 1” 250 PSI 64-25�
2” X �/4” 250 PSI 64-528
2 1/2” X �/4” 250 PSI 64-547
4” X 2 1/2” 250 PSI 64-542
Size Description Part Number1/2” 250 PSI 64-65�
�/4” 250 PSI 64-654
1” 250 PSI 64-655
1 1/4” 250 PSI 64-656
1 1/2” 250 PSI 64-657
2” 250 PSI 64-658
2 1/2” 250 PSI 64-659
Size Description Part Number�/4” 250 PSI 64-254
1” 250 PSI 64-255
2” 250 PSI 64-258
Size Description Part Number1” 250 PSI 64-477
2” 250 PSI 64-478
Size Description Part Number2” 250 PSI 64-608
Street
Female
Close Nipples - Galvanized
Nipples - Galvanized
Elbows - Galvanized
Couplers - Galvanized
Unions - Galvanized
Caps - Galvanized
Tees - Galvanized
Plugs - Galvanized
Bushings - Galvanized
Most fittings listed are in stock. If you require something but do not see it here, please call us!
PGB-6Our pneumo box is a durable and simple way to keep track of depth. We place a rear flanged 0-300 FSW gauge inside of a heavy duty pelican case and then plumb it for 1 diver. Each box includes calibration certificate.
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
GAUGES, DEPTH
One of the premiere gauges in the industry is now available at Bay-Tech Industries, Inc. Known for their durability and quality, Perma-Cal® gauges can be found from offshore platforms to laboratories around the world.
The advantage of Perma-Cal® direct drive over conventional C- tube gauges is simple, there is only one moving part No gears, linkages, or springs to wear or break. Perma-Cal® gauges have a unique helical-wound elastic element that is attached directly to the pointer shaft. This eliminates the need for any movement-amplifying gears or linkages (the parts of a C-tube that fail most frequently). Perma-Cal® gauges maintain their structural integrity and accurate calibration in the most demanding environments, even during prolonged and rugged use. Perma-Cal® direct drive pressure gauges provide the lowest cost of ownership by giving the best value in durability, reliability, and accuracy.
Perma-Cal® gauges have more durability and longevity than liquid-filled gauges, without the mess or problems of liquid fill. Perma-Cal® gauges do not have any of the problems filling solves. There are no gears or linkages to lubricate, and Perma-Cal® gauges are internally dampened with a small application of heavy (600,000 centistokes) silicone grease that eliminates pointer flutter. Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill.
All Perma-Cal® gauges have a high repeatable accuracy, instantaneous action, and are available as Grade 3A (+.25% full scale), Grade 2A (+.5% full scale), or +.5% mid-scale/ + 1% full scale. The full scale accuracy rating is applicable in both ascending and descending modes on all gauges, except for gauges rated 8,000 PSI and above , where the descending accuracy is +1% of full scale. Test gauges (Grade �A) come with a calibration certificate traceable to the National Institute of Standards and Technology (NIST) included in the price. Perma-Cal® provides the best in durability, reliability and accuracy.
Please see chart on opposite page to order Perma-Cal® gauges.
Perma-Cal® Gauges
Ordering Information
Certified Accuracy
No Liquid Fill
Direct Drive Bourdon Tube
1261253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
GAUGES, DEPTH
Option A B C D E F G H I J - K
Part Number
1: Pressure Gauge2: Seawater Depth Gauge
0: 1/4% Full Scale (8.5”, 6”, 4.5”, 2.5” Dials)1: 1/2% Full Scale (6”, 4.5”, �.5”, 2.5” Dials)2: 1% Full Scale (1/2% Mid Scale) (6”, 4.5”, �.5”, 2.5” Dials)
0: 6” (External Zero Adjust - EZA)1: 4.5” (EZA on Test Gauges, Optional on Process Gauges)2: 3.5” (EZA Available)3: 2.5” (8.5”, 6”, 4.5”, 2.5” Dials)8: 8.5” (EZA Included)
F: Front Flange (8.5”, 6”, 4.5”, 2.5” Only)M: No Flange, Metallic (4.5” Only)N: No Flange (6”, 4.5”, 2.5” Only)R: Rear Flange (6”, 4.5”, 2.5” Only)S: No Flange, Stainless Steel (4.5” Only)T: Turret (4.5”, �.5”)
I: Process (Bold, Easy-Reading)T: Test (Knife Edge, Precision Reading)
EZA - External Zero AdjustMB - Mirror BandDamp - Dampening
A: BlackB: BlueG: GreenR: RedW: WhiteY: YellowH: High Temp (Glass Filled Nylon, 4.5” Yellow Turret Only)U: Unpainted (M, S, and -Z Case Types Only)
0: Rear2: Bottom 4: Top
1: 1/4” NPT2: Not Assigned3: 1/2” NPT4: MS33514E45: AS4395E46: MS33649E47: Not Assigned8: 9/16”-18 O-Ring Union (MIL-G-18997)9: Customer Specified
C: Calibration Certificate (not apropos on 1/4%)E: EPDM Isolator InstalledH: Helium Leak TestL: Tempered GlassN: NicobrazeO: Cleaned for Oxygen ServiceP: Pointer Stop PinT: Stainless Steel TagV: Vitona Isolator InstalledZ: Aluminum Case (2.5” NF, 4.5” RF, 8.5” RF Case Types Only)
Option A - Product Type
Option B - Accuracy
Option K - Miscellaneous
Option J - Fitting Type
Option I - Fitting Position
Option H - Case Color
Option G - Pressure Range
Option F - Dial Trim
Option E - Pointer Type
Option D - Case Type
Option C - Dial Size
127202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
GAUGES, DEPTH
Units Of Measurement
PSI BAR FSW MSW/FSW
Dial CodesAnd
PressureRanges
CODE RANGE CODE RANGE CODE RANGE CODE RANGE
00 (Test) 15
01 �0 40 2 87 21/70
02 �0 41 2 70 70
0� 60 42 4 71 100
04 100 4� 7 7� 250 88 76/250
05 150 44 10 74 �00 89 90/�00
2� 160 75 �50 90 100/�50
06 200 45 14 76 450 91 140/450
07 �00 46 20 78 700 9� 225/750
08 400 56 28 79 1000 94 �00/1000
20 500 47 �5 85 1200
09 600 48 40 80 1500 95 450/1500
10 800 81 2000
11 1000 49 70
12 1500 50 100 82 �500
1� 2000 51 140
14 �000 52 200
22 4000 55 280
15 5000 5� �50
16 6000 57 400
21 8000
17 10,000 54 700
18(Test) 15,000
How to get a part number for a gauge: You want a 6”, 300 FSW Pneumo Gauge with 1/4” bottom connection, .25% accuracy, Front Flange, Mirror Band, Dampen-ing, Zero Adjust and a knife edge pointer. You will have to pick an option for each section of the chart below from the op-tions on the previous page.
Option G - Pressure Range
Option A B C D E F G H I J - K
Part Number
2 0 0 F T M 74 A 2 1
.25% Accuracy
FSW
6”
Front Flange
Pointer Type: TestKnife Edge
Dial Trim: MB, Damp, EZA
Range: 300 FSW Case: Black
Connection:Bottom
Connection Size: 1/4” MPT
1281253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
GAUGES, PRESSURE
Connection Point Key:
BTM - Bottom . CBM - Center Back Mount . LB - Lower Back
McDaniel’s pressure gauges have become the standard in the industry. With features
like stainless steel housings and brass internal components, it’s clear why. Each
McDaniels gauge is built to withstand 300% of full scale pressure without rupture and
can still maintain accuracy even at 130% above full scale pressure. Each gauge is tested
and can be traced back to the National Institute of Standards and Technology.
Gauges listed are in stock. If you require a gauge but do not see it here, please call us!
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T6B1/8 2” 0-�0 Glycerine 1/8” BTM -
T7B 2” 0-�0 Dry 1/4” BTM -
T6B 2.25” 0-�0 Glycerine 1/4” BTM -
0-30 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T6H 2” 0-400 Glycerine 1/4” BTM -
T6HL 2” 0-400 Glycerine 1/4” CBM -
T7H 2” 0-400 Dry 1/4” BTM -
T7HL 2” 0-400 Dry 1/4” CBM -
T7HO 2” 0-400 Dry 1/4” BTM Oxygen Clean
J6H 2.5” 0-400 Glycerine 1/4” BTM -
J7H 2.5” 0-400 Dry 1/4” BTM -
J7HL 2.5” 0-400 Dry 1/4” CBM -
J7HO 2.5” 0-400 Dry 1/4” BTM Oxygen Clean
0-400 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T6GL 2” 0-�00 Glycerine 1/4” CBM -
J6GL 2.5 0-�00 Glycerine 1/4” CBM -
J6G 2.5” 0-�00 Glycerine 1/4” BTM -
J7GL 2.5” 0-�00 Dry 1/4” CBM -
0-300 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
J7F 2.5” 0-200 Dry 1/4” BTM -0-200 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T6D1/8 2.25” 0-100 Glycerine 1/8” BTM -
T6D 2.25” 0-100 Glycerine 1/4” BTM -
0-100 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T7EL 2” 0-160 Dry 1/4” CBM -
J7E 2.5” 0-160 Dry 1/4” BTM -
0-160 PSI
129202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
GAUGES, PRESSURE
The performance, construction and distinctive design of the gauge sets it apart from any other pressure gauge on the market. Lighter and easier to use than a deadweight tester, and more rugged than any mechanical pressure gauge, the gauge is used every day throughout the world: in workshops, calibration laboratories, and on offshore platforms. We keep the �000 PSI gauge in stock, but many other pressure ranges are available. Please call to discuss your options.3KPSIXP2I
.01% Accuracy over full scaleReads � times per secondOperating temperature: 14oF to 122oF1/4” NPT connectorBattery: 3 AA Aluminum alloy enclosureHuge .65” Numerical display
•••••••
Digital Pressure Gauge
Standard Unit Specifications
Boot P/N: 95408PR
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T6I 2” 0-600 Glycerine 1/4” BTM -
J6I 2.5” 0-600 Glycerine 1/4” BTM -
KIP-GF 2.5” 0-600 Glycerine 1/4” LB Front Flange
J7I 2.5” 0-600 Dry 1/4” BTM -
*J7IO 2.5” 0-600 Dry 1/4” BTM Oxygen Clean
0-600 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
J76K 2.5” 0-6000 Dry 1/4” BTM -
J76KO 2.5” 0-6000 Dry 1/4” BTM Oxygen Clean
0-6000 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
T74K 2” 0-4000 Dry 1/4” BTM -
T74KL 2” 0-4000 Dry 1/4” CBM -
J64K 2.5” 0-4000 Glycerine 1/4” BTM -
J64KL 2.5” 0-4000 Glycerine 1/4” CBM -
J74K 2.5” 0-4000 Dry 1/4” BTM -
*J74KO 2.5” 0-4000 Dry 1/4” BTM Oxygen Clean
0-4000 PSI
Part Number Size Range (PSI) Fill Connection(Size)
Connection Point
Special
J6N 2.5” 0-�000 Glycerine 1/4” BTM -
J6NL 2.5” 0-�000 Glycerine 1/4” CBM -
J7N 2.5” 0-�000 Dry 1/4” BTM -
0-3000 PSI
Connection Point Key:
BTM - Bottom . CBM - Center Back Mount . LB - Lower Back
1�01253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HAND TOOLS
Rigging axe, great for clean up of cables, ropes and other hazards underwater. Includes leather lanyard.RA558
Great tool for use when hydraulics are unavailable or impractical. Quickly remove barnacles and other marine growth.DK708
Bear Paw permanent magnets are light, easy to use and need no recharging. In application areas such as lifting steel or fabrication shop, off-cuts from saws can be easily handled and stacked with a Bear Paw magnet, ‘profiled’ components can also be moved, even when hot. Also great for underwater work when hand-holds are hard to find or for those long inspections.
Model Part Number Lift WeightBPM-150 20125-1 150 LBS 6 LBS
BPM-250 20125 250 LBS 6 LBS
BPM-400 201�0 400 LBS 8 LBS
BPM-600 20115 600 LBS 10 LBS
BPM-600CA 20171 600 LBS 12 LBS
600 CA Includes a lifting eye
Rigging Axe
Bear-Paw Magnets
Draw Knife
1�1202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
The DESCO Air Hat was designed in 1968, and has continually evolved to meet the requirements of the commercial diving industry. Major upgrades to the design of the Air Hat over the years were made so they could be retrofitted to older helmets thus increasing their service life. The design of the Air Hat maximizes safety, durability, and reliability, while requiring simple routine maintenance and care.
The DESCO Air Hat conforms to all current regulations of the ADC Consensus Standards, and U.S. Federal Regulations administered by OSHA and the U.S. Coast Guard. The Air Hat has been awarded certification by the European Community for use in EC member countries and carries the CE # stamped on the tail.
The DESCO Air Hat is a “free flow” helmet of contemporary design, using time proven techniques and materials in its construction, similar to the heavy gear helmets of the past. Brass castings are deep soldered to a 1/16” thick spun copper shell. The Air Hat is remarkable both for its ruggedness and its simplicity of design. It can be disassembled and reassembled using only a screwdriver and wrench. It can easily be donned or removed by the diver without assistance from the tender. Using the adjustable exhaust valve the Air Hat can be adjusted to either side of neutral buoyancy underwater with ease. With its low center of gravity and excellent fore and aft balance it
HELMETS
rest comfortably on the divers head. The interior headliner is adjustable for size and the foam pads are covered in leather for comfort. The DESCO Air Hat is the preferred helmet for working in hazardous environments where contamination of the diver is a concern. The “free flow” or “overpressure” design allows for a constant positive pressure to be maintained in the Air Hat. The standard double exhaust incorporates two separate successive seals to restrict the possibility of leak back.
The DESCO Air Hat comes standard with a neck dam for sealing at the neck. Leading dry suit manufacturers offer a DESCO yoke to directly mate the helmet to the dress in place of the neck dam. Installation of the insert ring to the dry suit is quick and easy, and does not require tools. Sealing of the Air Hat at the neck is achieved with two independent but complementary seals which are air and watertight. The Air Hat is shipped with the neck ring insert, a size 15 neck dam (unless another size is requested at time of ordering), and an adjustable jock strap.
The DESCO Air Hat now comes equipped with a side communications cup with integrated binding posts. The new configuration moves the transceiver out of the airflow path and closer to the divers ear. The standard configuration is two wire communications through the binding posts. The Air Hat can also be fitted to use 4 wire communications (assembly #61228) from the factory or the customer can install it later in the port provided.
DESCO Air Hat
1�21253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HELMETS
DESCO DIVING HATCAT. NO. 61000
1��202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Loc. Part # Description
Neck Ring Insert1 61054 Neck Seal O-Ring
2 61051 Neck Ring Insert
� 61052 Neck Dam
4 6105� Shim
Window Assembly5 61076 Window
6 61078 Window Gasket
7 61077 Window Screw
Air Intake Assembly8 61127 Copper Tube
9 61126 Inside Elbow
10 611�5 Air Distributor
11 NO PART # Lambs Wool
12 61128 Air Control Valve
1� 611�4 Valve Handle Nut
14 611��N Valve Handle
15 611�2 Valve Stem Adapter
16 611�1 Valve Retaining Nut
17 611�0 Brass Washer
18 61129 Lead Washer
Pot and Neck Ring Assembly19 61026 Pot and Neck Ring
The G2000SS helmet is a funtional, robust and durable helmet that sets the standard for modern diving helmets. The helmet shell, neck ring and retainer are all constructed from stainless steel to resist corrosion and electrolysis. It features a dual action locking system and a unique side-mounted regulator. All breathing loop components are protected inside of the shell and are easy to maintain.
The G2000SS is manufactured by The Aqualung group. Aqualung maintains a global network for sales and technical support for their products and is a leading manufacturer in the industry.
Accessories
NECK RETAINER LOCKING SYSTEM UPGRADE New locking system designed for 2011. New system is easier to oper-ate and maintain and will retrofit all existing Gorski Helmets.
WELDING SHIELD KITP/N: 400102 The welding shield is an essential piece of equipment for any diver. This corrosion resistant unit uses stainless stell hardware and installs in minutes.
DOUBLE EXHAUST KITP/N: 400111 This kit adds an extra layer of protection during contaminated water div-ing. Installs in minutes.
Must order all items to retrofit helmetLocking System - Right Unit 400109
Locking System - Left Unit 4001�2
Neck Retainer, MOD 1 400114
1�5202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HELMETS
38
APPEN
DIX H
WELD
ING
SHIELD
KIT (P/N
400102)
Loc. Part # Description Qty
85 400087 Welding Shield Body 1
86 400088 Welding Lens 1
87 400089 Welding Lens Clip 2
88 400090 Welding Lens Gasket 1
89 400091 Screw 2
90 400092 Welding Shield Hinge 2
91 40009� Screw 2
92 400094 Screw 2
9� 400095 Welding Shield Spring 1
94 400096 Screw 1
39
APPEN
DIX I
DO
UB
LE EXHAU
ST KIT (P/N
400111)
Loc. Part # Description Qty
95 400097 Dual Exhaust Bushing 1
96 400098 Dual Exhaust Seat 1
97 400099 Spacer Ring 5
98 400101 Screw 5
55 400047 Flapper Valve - Exhaust 1
Weld Shield KitP/N: 400102
Dual Exhaust Adapter KitP/N: 400111
1�61253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Loc. Part # Description Qty
1 400001 Stainless Steel Shell 1
2a 400116 Latch Base, Left 1
2b 400117 Latch Base, Right 1
� Lock Washer 2
4 40011� Latch Bolt 2
5 400114 Neck Retainer, MOD1 1
6 40000� Neck Retainer Bolt 1
7 400004 Neck Retainer Nut 1
8a 400118 Left Latch 1
8b 400119 Right Latch 1
9 400005 Latch Spring 2
10 400120 Latch Spring Washer 2
11 Bolt, Latch Spring 2
12 400006 Knob Nut 1
Loc. Part # Description Qty
1� 400007 Knob Spring 1
14 400008 Free Flow Knob 1
15 400009 Screw 10
16 400010 Valve Exhaust Cover 1
17 400011 Regulator Cover 1
18 400012 O-Ring, Face Port 1
19 40001� Face Port 1
20 400014 Port Retainer 1
21 400015 Screw 12
22 400016 Communication Post 2
2� 400017 Comm. Bulkhead Ass’y 1
2�a O-Ring 1
2�b Cap and Ferrules, Comm. Bulkhead
1
HELMETS
NECK DAM ASMSHEET 7 OF 7
6
7
8B2B
9
1213
1415
21201918
1517
SECOND STAGE ASMSHEET 5 OF 7
NOSE CLEARINGDEVICE ASMSHEET 6 OF 7
16
22
3
INNER COMPONENTSSHEET 2 OF 7
REV. E ~04/22/11
1011
MANIFOLD BODY ASMSHEET 3 OF 7
5
FREE FLOW ASMSHEET 4 OF 7
23 1
48A
2A9 10
11
23A
23B
ITEMNO. QTY. PART NUMBER DESCRIPTION
1 1 1SS-0001 G2000SS STAINLESS SHELL
2A 1 1SS-0101 LATCH BASE LEFT
2B 1 1SS-0102 LATCH BASE RIGHT
3 2 1SS-0003 LOCK WASHER
4 2 1SS-0099 LATCH BOLT
5 1 1SS-0100 NECK RETAINER, MOD1
6 1 1SS-0006 NECK RETAINER BOLT
7 1 1SS-0007 NECK RETAINER NUT
8A 1 1SS-0103 LEFT LATCH
8B 1 1SS-0104 RIGHT LATCH
9 2 1SS-0009 LATCH SPRING
10 2 1SS-0105 LATCH SPRING WASHER
11 2 1SS-0106 LATCH SPRING BOLT
12 1 1SS-0012 KNOB NUT
13 1 1SS-0013 KNOB SPRING
14 1 1SS-0014 FREE FLOW KNOB
15 10 1SS-0015 SCREW
ITEMNO. QTY. PART NUMBER DESCRIPTION
16 1 1SS-0016 VALVE EXHAUST COVER
17 1 1SS-0017 REGULATOR COVER
18 1 1SS-0018 O-RING
19 1 1SS-0019 FACE PLATE
20 1 1SS-0020 PORT RETAINER
21 12 1SS-0021 SCREW
22 2 1SS-0022 COMMUNICATION POST
23 1 1SS-0023 COMM. BULKHEAD ASSY
23A 1 1SS-0107 O-RING
23B 1 1SS-0108 CAP & FERRULES, COMM. BULKHEAD
SHEET 1 OF 7
Outer Components
1�7202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
* These parts are located inside the LP Valve Assembly.
Gorski Annual Service Kit (P/N: 400108)
141202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HOSE
Our pneumo hose is com-posed of a durable polyure-thane core and a PVC abrasion coating. The hose has a 250 PSI maximum working pressure and a nominal inner diameter of 1/4”.H73-04G - 1/4” pneumo hose
Available in 1/2”, 5/8” and 1” rubber hose for general work. Perfect for low cost hot water hose or use with pneumatic tools. P23-08-200 - 1/2” Hose, 200 PSIRR-200-3/4 - �/4” Hose, 200 PSIP23-10-150 - 5/8” Hose, 150 PSIP23-16-200 - 1” Hose, 200 PSI
Size (I.D.) Part Number O.D. Working Pressure
WeightPer 100’
�/8” 33HB3/8-<length> .75” 1,125 PSI 20.5 LBS
1/2” 33HB1/2-<length> .95” 1,000 PSI �1 LBS
Armstrong brand hose is a light-weight air line suitable for light duty applications. It is also a low cost alternative to Gates hose for burning rigs. Hose features a 250 PSI working pressure, 950 PSI burst pressure and �/8” nominal I.D.HS-3/8 - �/8” hose
Gates Divers Air Hose, 3/8” and 1/2” I.D.
Pneumo Hose, 1/4” I.D.Armstrong Hose, 3/8” I.D. Air Hose
Gates ��HB hose is designed for handling mixtures of oxygen, helium and nitrogen commonly used in diving applications. Gates hose is built to be kink resistant and will provide extra long wear under normal use.
Size (I.D.) Part Number O.D. Working Pressure
WeightPer 100’
�/8” LD128�-06 .75” 1,125 PSI @ 70ºF 18 LBS
1/2” COMING SOON! Call for information.
Lifestar® Breathing Air Hose Lifestar breathing air hose is made with a food grade polymeric compound that gives the diver a clean breathing air passageway. It is capable of handling mixtures of oxygen, helium and nitrogen gases. It features a “Star Core” safety design that makes the hose maybe the most kink resistant product on the market today.
�/8” Hose rated to 1125 PSI @ 70ºF Meets MIL-H-2815G off-gassing for air breathing applicationsRoHS CompliantSilicone Free core and cover
••••
Reusable Oxygen and JIC6 Fittings Available
1421253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HOSE
Lightweight, ultra-flexible and kink resistant. Aquaflow is ideal for breathing gas supply and pneumo service for surface demand umbilicals.
2 x 16 awg Power Core, 1 x Mini RG59 Coaxial CableOrange Polyurethane Jacket
0.4��” Diameter
CDX010811
Video Cable1 x 20 awg Screened Pair,
1 x 24 awg Pair1 x 16 awg Screened Pair
Single 16 awg Core1 x Mini RG59 Coaxial CableOrange Polyurethane Jacket
0.440” Diameter
CDR011611
Video Cable16 x 20 awg Core
1 x RG59 Coaxial CableBraided Strength Member
Orange Polyurethane Jacket0.4�” Diameter
1100 lb Breaking Strength
CDX0106093 Pair Signal Cable
� x 20 awg Screened Pairs,Black Polyurethane Jacket
0.�4” Diameter
CDX09081�4 Pair Signal Cable
4 x 20 awg Screened Pairs,Red Polyurethane Jacket
0.480” Diameter
1441253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
We offer a thermoplastic hose specifically built for Bay-Tech Industries, Inc. for use with hydraulic equipment. This hose is very durable and is used exclusively with our hydraulic hose reels. Hose features light but very strong thermoplastic hoses of �/4” supply and 1” return. The �/4” side is rated to 2250 PSI working pressure and the 1” return is rated to 1000 PSI working pressure. Available in 100’, 300’, or 600’ lengths. HS-3/4X1X100-D - Twinline Hydraulic Hose, 100’HS-3/4X1X300-D - Twinline Hydraulic Hose, 300’HS-3/4X1X600-D - Twinline Hydraulic Hose, 600’
Bay-Tech Industries, Inc. now offers a communications wire built to the same standards of the old military wire. The heavily armored wire is perfect for diving umbilicals. It is an 18/4 wire with a heavy duty stainless steel mesh inside of the heavy PVC outer coating. Comm. wire is the strongest member of your umbilical. Don’t substitute a cheaper, weaker wire. Think safety.WR-SP4 - Communication Wire
We keep many different sizes of rope in stock to meet any requirement you may have. Sizes and lengths are listed below. Rope1/4-600’ - 1/4” x 600’ Polypropylene RopeRope3/8-600’ - 3/8” x 600’ Polypropylene RopeRope-PPM3/8-600’ - 3/8” x 600’ Polypropylene Monofilament Rope1/2-600’ - 1/2” x 600’ Polypropylene RopeRope3/4-600’ - 3/4” x 600’ Polypropylene Rope
We stock a 2/0 heavy duty welding cable but can get any size you need. Our welding cable has a heavy rubber coating for higher abrasion resistance and greater insulation.C-1/0 - 1/0 Welding CableC-2/0 - 2/0 Welding CableC-3/0 - �/0 Welding Cable
HOSE, WIRE & ROPE
Rope
Communications Wire
Welding Cable
Twinline Hydraulic Hose
145202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HOSE REELS
Our HHR �00 Reel is a light, compact unit for smaller lengths of hydraulic hose. The reel is equipped with 2 pad eyes for lifting, 15’ whips to go to the hydraulic unit, a transport latch and all plumbing. We have added an aluminum drip pan with drain plug to the frame to catch any oil during a tool change out or if a leak develops. This unit is powder coated for durability but can be painted or galvanized upon request. Approximate Weight: 600 LBS.Length: 42”Width: 44”Height: 58”
HHR300: Hydraulic Hose Reel, 300’
All hose reels can be fitted with work whips upon request. These are 100’ sections of hydraulic hose that are at-tached to the existing hose to absorb most of the wear they are subjected to. These whips can be quickly and
easily replaced on site should a hose problem arise.
HHR600: Hydraulic Hose Reel, 600’ Bay-Tech Industries Inc’s purpose built hydraulic hose reel is one of the best on the market today. Reels can be purchased with or without hydraulic hose and/or oil. Each one is powder coated for years of service but can be galvanized or painted on request. The skid has been redesigned to accommodate flexibility and functionality. Our forklift slots are no longer enclosed and are raised 2” from the ground to make it more difficult for debris to enter. Instead of a 2 piece skid, the unit is now a single piece for greater strength and we’ve also incorporated a deeper drip pan into the design. We have also developed a foot brake to assist in stopping the reel and a latch to keep the reel in place during transport. The hose drum is mounted on pillow bearings and includes 15’ whips with quick disconnects. Approximate Weight: 1500 LBS.Length: 49”Width: 61”Height: 70”
Foot Brake Transport Latch
Rental Available!
Transport Latch
1461253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
The Model SSHD7044 is a completely stainless steel fabricated hose reel with a hydraulic motor mounted to the frame. It features 16T and 96T sprockets, spoked discs, 2” square tubing frame, pillow block ball bearings, 10ga drum, barstock tubing hub, mid duty pin lock, 1” FNPT risers fork lift pockets and drip pan. It also comes with a stainless chain guard , 2 lifting pad-eyes and brackets for hanging hoses when not in use.Approximate Weight: 800 LBSLength: 46”Width: 58”Height: 59”
SSHD7044: Stainless Hydraulic Hose Reel, 600’
HOSE REELS
Due to demand, we have made available a hydraulic powered reel capable of handling jet hose. The HD�76-78-80-�6RT is capable of handling up to 600’ of 2-1/2” Jet Hose and 1” Air Hose. It does this with the help of a 6 GPM/1500 PSI hydraulic motor that can rewind approximately 100 feet per minute.
The all stainless steel unit comes built with a �” square tubing frame, 1/4” thick rolled disc and drum, a parker hydraulic motor, #80 chain drive with 11T and 96T sprockets, full chain guards and swivel connections for both the jet and air hose. For transport, it comes with (2) 4” x 8” Forklift pockets and two pad eyes.
HD376 Stainless Jet Hose Reel
Shown plumbed with control valve
147202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HOT WATER UNIT
The Model: HWUDR401 is one of the most widely used and dependable hot water units available today. These units provide hot water for up to two divers down to �00 FSW. These units include a steel galvanized frame, digital controls, safety shut downs and a stainless steel submersible pump. We have updated it with an auxiliary marine grade junction box to power the stainless steel submersible pump. The box is wired into the control panel so the pump can be conveniently shut off. We have also added a 115 VAC. 20 Amp Plug with built in GFI for power.
Hot Water Suits, Page 91Hot Water Suit Coupler: BPHC-8-8F
Rental Available!
1481253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC UNITS
Our hydraulic power unit is driven by a Kubota D1005 water cooled engine. It is a rugged skid mounted diesel hydraulic power package designed for providing hydraulic flow for operating a variety of tools and equipment. The unit comes standard with a 40 gallon reservoir, steel tubular skid with drip pan and 4 lifting eyes. It has an adjustable flow control with built-in relief valve and flow meter. Models are available with single and dual circuits.
Kubota D100525 HP @ �600 RPMAir startManual emergency shut-down
••••
Gear drive�500 RPM max. @ �000 PSIIn port SAE16Out port SAE12
••••
Electric starterBlasted/painted skidGalvanized skidLoad testDenso taped fittings
•••••
Hour Meter:46-T-75-H Vibration Isolator:
52010-65
HPU1416KAS: Hydraulic Power Unit
Standard Unit Specifications
Options
Engine
Pump14-16 GPM2000 PSI8 Gallon fuel tank40 Gallon reservoirOil site/temp glassTemperature gaugeOil pressure gauge50 Micron suction strainerFlow control with adjustable relief valveIn line flow meterHour meterReturn filter0-�000 PSI stainless steel gaugeHeavy duty gear pump�/4” Quick disconnects - pressure and returnPowder coated skid with forklift slots and 4 point liftShock mounted engine
1 Gallon - HYD-NS32Biodegradeable Hydraulic Oil Available Upon Request.
Rental Available!
149202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC UNITS
Our hydraulic power unit is driven by a Kubota D170� water cooled engine. It is a rugged skid mounted diesel hydraulic power package designed for providing hydraulic flow for operating a variety of tools and equipment. The unit comes standard with a 60 gallon reservoir, steel tubular skid with drip pan and four lifting eyes. It has an adjustable flow control with built-in relief valve and flow meter. Models are available with single and dual circuits.
24 GPM2000 PSI15 Gallon fuel tank60 Gallon reservoirOil site/temp glassTemperature gaugeOil pressure gauge50 Micron suction strainerFlow control with adjustable relief valveIn line flow meterHour meterReturn filter0-�000 PSI stainless steel gaugeHeavy duty gear pump�/4” Quick disconnects - pressure and returnPowder coated skid with forklift slots and 4 point liftShock mounted engine
1 Gallon - HYD-NS32Biodegradeable Hydraulic Oil Available Upon Request.
Rental Available!
1501253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC UNITS
Since components to electric motor driven units are smaller and easier to swap out without major design changes, we of-fer this unit as a completely custom build. All of our units are built on a heavy duty skid frame with many of the standard features of other hydraulic units in this catalog.
Custom Hydraulic Power Unit
Oil reservoirOil site/temp glassOil pressure gauge50 Micron suction strainerFlow control valve with adjustable relief valveIn line flow meterReturn filter0-�000 PSI stainless steel gaugeHeavy duty gear pump�/4” Quick disconnects - pressure and returnPowder coated skid w/forklift slots and 4 point liftAluminum cover25’ Power cableMotor saver phase monitor
•••••
•••••
•
•••
Standard Features
GPM 1250 PSI 1500 PSI 1750 PSI 2000 PSI
10 8.58 10.� 12.0 1�.7
12 10.� 12.4 14.4 16.5
15 12.9 15.4 18.0 20.6
20 17.2 20.6 24.0 27.5
25 21.4 25.7 �0.0 �4.�
Horsepower To Drive A Pump
1.) Pressure
2.)
GP
M1. Choose your pressure requirement. 2. Choose your GPM requirement. �. Choose your voltage requirement.
1 Gallon - HYD-NS32Biodegradeable Hydraulic Oil Available Upon Request.
151202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC UNITS
Our portable hydraulic unit is driven by a Kubota OC95 Air Cooled Diesel engine. It is a rugged, frame mounted die-sel hydraulic power package designed to provide hydraulic power for operating a variety of tools and equipment. The unit comes standard with a 17 gallon reservoir, aluminum frame with drip pan and lifting eyes. It has an adjustable flow control valve with built in relief valve and flow meter.
8-10 GPM1500 PSI7 Gallon fuel tank17 Gallon reservoirOil site/temp glass50 Micron suction strainerFlow control with adjustable reliefValveIn line flow meterReturn filter0-�000 PSI stainless steel gaugeHeavy duty gear pump�/4” Quick disconnects - pressure and returnAluminum roll-around skid with handles
Gear drive4000 RPM max. @ �000 PSIIn port SAE12Out port SAE10
••••
From Left to Right:Rubber Shock: J-3424-175
Rubber Foot: J-3424-135
EngineStandard Unit Specifications
Pump
HPU10KES: Hydraulic Power Unit
Rental Available!
Hydraulic Oil, No Sheen
1 Gallon - HYD-NS32Biodegradeable Hydraulic Oil Available Upon Request.
1521253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC UNITS
The GT Series of Stanley Hydraulic Power Units are designed for continuous duty operation with an efficient oil cooler as standard equipment. With three different models to offer the underwater industry, Stanley Hydraulic Tools has a solid reputation of superior power units for top side work.
Stanley GT Series Power Units
Meets or exceeds HTMA hydraulic circuit design with superior coolingElectronically controlled engine speed - provides set flowAuto idle feature - lower fuel consumption and less noiseTool circuit lockout during engine startup - safety featureQuartz hour meter on control panel - records engine run timeLift and latch handle with fold-up side handles�5-AH sealed, non-spillable, no maintenance battery located in covered compartmentElectric start engine has pressure lubrication system, low engine oil shut down and spin on oil filterIn-tank hydraulic filter with dipstick and easy access filter replacement
•
•
•
•
•
••
•
•
Features
Specifications GT18GT18B01 - 5 or 8 GPM
GT18B02 - 5 or 8 GPM, CE
GTR10GTR10B02 - 5 or10 GPM
GT23GTR�B02 - 8 or 12 GPM
Output Capacity 5 or 8 GPM / 20 or �0 LPM 5 or 10 GPM / 20 or �8 LPM 8 or 12 GPM / �0 or 45 LPM
Pressure 2000 PSI / 140 BAR 2000 PSI / 140 BAR 2000 PSI / 140 BAR
Weight ��0 LBS / 150 KG ��0 LBS / 150 KG �40 LBS / 154 KG
Length �5” / 89 CM �5” / 89 CM �5” / 89 CM
Width 21-1/2” / 54.6 CM 21-1/2” / 54.6 CM 21-1/2” / 54.6 CM
Height 29” / 7�.7 CM 29” / 7�.7 CM 29” / 7�.7 CM
ACCESSORIESPart Number: Description
��212 Weather Cover
1��60 Hose Basket Conversion Kit
64940 12 VDC Male Plug, Marine Type
64942 12 V Receptacke Assembly
15�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
CUSTOM HYDRAULIC UNITS
Hydraulic Unit with Dual Circuits
Hydraulic Unit, 50 GPM
Hydraulic, Electric, Unit with Frame
Hydraulic Unit, Electric, Base Mount
1541253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC TOOLS & ACCESSORIES
Breaker/Driver - BR45
Part Number: BR45350Performance 1525 BPM @ 8 GPM
Steel Capacity 1” x 4 1/4” Hex
Handle Type T-Handle
Circuit Type Open Center
Flow Range 7-9 GPM / 26-�4 LPM
Optimum Flow 8 GPM / �0 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 4� LBS / 19.5 KG
Length 25” / 6�.4 cm
Width (at handles) 14” / �5 cm
Hydraulic Ports -8 SAE O-Ring
Whips Yes
Couplers No
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1” hex chuck and latch retainer. Painted hi-visibility yellow.
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
07702 Moil Point, 1” Hex, 12” under collar
0770� Narrow Chisel, 1” Hex, 14” under collar
07704 �” Wide Chisel, 1” Hex, 14” under collar
07705 Clay Spade, 1” Hex, 5 1/2” under collar
07706 Asphalt Wedge, 1” Hex, �” Wide Blade
Part Number: BR67320Performance 1�00 BPM @ 8 GPM
Steel Capacity 1-1/8” x 6” Hex
Handle Type T-Handle
Circuit Type Open Center
Flow Range 7-9 GPM / 26-�4 LPM
Optimum Flow 8 GPM / �0 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 7� LBS / �� KG
Length 29” / 7�.6 cm
Width (at handles) 16” / 41 cm
Hydraulic Ports -8 SAE O-Ring
Whips Yes
Couplers No
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
022�1 Clay Spade, 1 1/8” Hex, 5 1/2” Wide Blade
022�2 Asphalt Cutter, 1 1/8” Hex, 5” Wide Blade
02��� Moil Point, 1 1/8” Hex, 14” under collar
02��4 �” Wide Chisel, 1 1/8” Hex, 14” under collar
0�990 Narrow Chisel, 1 1/8” Hex, 14” under collar
04176 Rod Driver, 1 1/8” Hex, 1” Rod
08106 Asphalt Wedge, 1 1/8” Hex
Stanley Breaker/Driver - BR67 The BR67 is a medium sized breaker in the line up of underwater paving breakers. It is in the 70lb class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving. Standard 1-1/8” x 6” hex chuck and latch retainer.
Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
155202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Part Number: BR87320Performance 1080 BPM @ 8 GPM
Steel Capacity 1-1/8” x 6” Hex
Handle Type T-Handle
Circuit Type Open Center
Flow Range 7-9 GPM / 26-�4 LPM
Optimum Flow 8 GPM / �0 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 85 LBS / �9 KG
Length 29” / 7�.6 cm
Width (at handles) 16” / 41 cm
Hydraulic Ports -8 SAE O-Ring
Whips Yes
Couplers No
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
022�1 Clay Spade, 1 1/8” Hex, 5 1/2” Wide Blade
022�2 Asphalt Cutter, 1 1/8” Hex, 5” Wide Blade
02��� Moil Point, 1 1/8” Hex, 14” under collar
02��4 �” Wide Chisel, 1 1/8” Hex, 14” under collar
0�990 Narrow Chisel, 1 1/8” Hex, 14” under collar
04176 Rod Driver, 1 1/8” Hex, 1” Rod
08106 Asphalt Wedge, 1 1/8” Hex
Breaker/Driver - BR87 The BR87 is the largest breaker in the Stanley Hydraulic Tools line up of underwater paving breakers. It is in the 90lb class of breakers and with it’s long piston stroke, is our hardest hitting hand held breaker. It is used for heavy concrete and rock breaking, coral removal and rod/anchor driving.
HYDRAULIC TOOLS & ACCESSORIES
PARTS AND REPAIR ARE AVAILABLE!
Rental Available!
Part Number: HG60130BCapacity 2.5” Diamater x 2.75”
Performance 4500 RPM
Flow Range 5-10 GPM / 19-�8 LPM
Pressure 2000 PSI / 140 BAR
Ports -8 SAE O-Ring
Weight 11.� LBS / 5.1� Kg
Length 2�” / 58.4 mm
Width �.�” / 8.4 cm
Height 4” / 10.2 cm
Connection Flush Face Couplers
Hose Whips Yes
Arbor 5/8” -11
Bull Nose Grinder - HG60 The HG60 is ideal for smoothing weld seams, de-burring drilled holes, cleaning castings or any application where removal of unwanted material is needed. The motor is specifically designed to optimize power and RPM for grinding applications. It won’t bog down on those tough grinding jobs!
1561253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Part Number: CH18311Steel Capacity .580 Hex Shank, Round Collar Tool
Chipping Hammer - CH18 The ergonomic “D” handle with inside trigger prevents accidental operation of the tool. The handle is plastisol coated for diver comfort. The CH18 has a slide latch design tool big retainer that will accept .580 hex shank, round collar tool bits.
HYDRAULIC TOOLS & ACCESSORIES Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
Part Number: CH1533101Steel Capacity .580 Hex Shank, Oval Collar Tool
Chipping Hammer - CH15 The ergonomic “D” handle and short 17” over all length, makes it easy to use in confined and hard to access locations. The floating trigger design requires minimal pressure across any part of its surface to engate the tool. The CH15 has a solid bit retainer and will accept .580 hex shank, oval collar tool bits.
157202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Part Number: CO23341Capacity 10” / 25.4 CM Wheel
Performance �275 RPM @ 15 GPM
Arbor 1” / 2.5 CM
Circuit Type Open Center
Flow Range 10-15 GPM / �8-57 LPM
Optimum Flow 15 GPM / 57 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 2� LBS / 10.4 KG
Length 19-1/2” / 49.5 CM
Width 11” / 28 CM
Hydraulic Ports -8 SAE O-Ring
Couplers No
Hose Whips Yes
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
0�694 10” / 25.4 CM diameter, 1” Arbor, diamond blade for concrete
04116 10” / 25.4 CM diameter, 1” Arbor, abrasive blade for concrete
04117 10” / 25.4 CM diameter, 1” Arbor, abrasive blade for aluminum and metal
Cut Off Saw - CO23 The C02� Cut-Off Saw is a hydraulic powered saw for dimensional cutting of metal, concrete, rock, masonry and coral. It has a high torgue gear motor and 10” blade capacity for abrasive and diamond wheels with a 1” arbor.
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
076�8 15” Saw Bar
07641 15” Saw Chain
076�9 20” Saw Bar
07642 20” Saw Chain
11464 Scrench (Combo Screwdriver-bar nut wrench)
Chain Saw - CS06 The CS06 is a hydraulic powered chain saw for cutting all types of wood structures underwater - including bridge pilings, pier and dock timbers. Its compact design and high torque gear motor provides divers instant chain speed to cut through the toughest timbers with ease. Available with bars up to 20” Part Number:
CS06920 - 15” Cut Capacity w/Bar and ChainCS06930 - 20” Cut Capacity w/Bar and Chain
Cut Capacity 15” to 20” (see numbers above)
Chain Drive Standard Floating Pin Sprocket and Wear Plates
Chain Type 0.�25 Pitch
Flow Range 7-9 GPM / 26-�4 LPM
Optimum Flow 8 GPM / �0 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Motor Speed @ 8 GPM 8540 RPM
Chain Speed @ 8 GPM 3238’ per min / 16,45 m/s
Weight (less bar/chain) 7.� LBS / �.� KG
Length (less bar/chain) 14” / �6 CM
Width 9” / 2� CM
Hydraulic Ports -8 SAE O-Ring
Couplers No
Whips No
HYDRAULIC TOOLS & ACCESSORIESRental Available!
PARTS AND REPAIR ARE AVAILABLE!
1581253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
72947 24” / 61 CM Sprocket Nose Saw Bar
72951 24” / 61 CM Saw Chain
72948 �0” / 76 CM Sprocket Nose Saw Bar
72952 �0” / 76 CM Saw Chain
72949 �6” / 91 CM Sprocket Nose Saw Bar
7295� �6” / 91 CM Saw Chain
72950 42” / 107 CM Sprocket Nose Saw Bar
72954 42” / 107 CM Saw Chain
Chain Saw - CS11 The CS11 is an extreme duty hydraulic powered chain saw for cutting all types of wood structures underwater - including bridge pilings, pier and dock timbers. Its robust design and high torque gear motor provides divers instant chain speed to cut through the toughest timbers with ease. The power to weight ratio is significantly higher than any other wood cutting chain saw and is available with bar lengths up to �6”.
Part Number: CS113NO001 (Chain and Bar Sold Separately)
Cut Capacity 24”, �0” & �6” / 61, 76, 91 CM
Chain Type �/8” Pitch
Circuit Type Open Center
Flow Range 10-14 GPM / �8-5� LPM
Optimum Flow 14 GPM / 5� LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Motor Speed @ 12 GPM 5295 RPM
Chain Speed @ 12 GPM 2591’ per min / 13.16 m/s
Weight (less bar/chain) 17 LBS / 7.7 KG
Length (less bar/chain) 17” / 4� CM
Width 9” / 2� CM
Hydraulic Ports -8 SAE O-Ring
Couplers Yes
Whips Yes
Features
Integral Stanley Hyrevz gear motor produces high torqueDirect drive motor - no chain coast when trigger is releasedStainless Steel spool and fastenersInterlocking safety trigger and hand guardLow kick back bar and chain - standardOpen Center/Closed Center - Dual Spool FeatureLarge assist handleAdjustable chain oilerBucking cleatWide flow rangeOrder bar and chain separately
•
•
••••
•••••
HYDRAULIC TOOLS & ACCESSORIES Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
N O T I C EALL CS11 CHAINSAWS PRODUCED AFTER MAY 2012 HAVE A NEW STUD SIZE TO ATTACH THE BAR. OLD BARS AND CHAINS WILL NOT WORK ON NEW SAWS AND HAVE BEEN DISCONTINUED. SAWS PRODUCED BEFORE MAY 2012 WILL BE REQUIRED TO CHANGE THE MOUNTING STUDS IN ORDER TO ACCOMMODATE NEW EQUIPMENT.
STUD KIT - P/N: 72960
Older bars and chains are in stock and available. Call for part numbers.
159202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC TOOLS & ACCESSORIES
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
�0�05 15” Bar, Sprocket Nose
56801 15” Diamond Chain, Ultra �2
5680� 15” Diamond Chain, Pinnacle �2
�0�06 18” Bar, Sprocket Nose
56802 18” Diamond Chain, Ultra �7
586�2 18” Diamond Chain, Pinnacle �7
2�517 Sprocket Wrench
20859 Diamond Chain Butterfly Repair Kit
20857 Chain Repair Spinner
20858 Chain Repair Breaker
DCP�0101 Water Pump, 12 VDC, Battery Clip
DCP�0100 Water Pump, 12 VDC, Marine Type Plug
Diamond Chain Saw - DS11 The DS11 Diamond Chain Saw is specifically designed to cut solid concrete underwater. Cuts square corners without over-cut and can plunge cut sea walls up to 18” thick. It has two available bar lengths (15” and 18”) and two different chains depending on the amount of rebar and hardness of the concrete. A minimum of 20 PSI water pressure is required at the saw for cooling and lubrication of the bar and chain.
Part Number: DS115000 (Chain and Bar Sold Separately)
Capacity 15 or 18”, �5 or 45 CM Bar
Chain Type Diamond Impregnated Chain Segments
Circuit Type Open Center
Flow Range 12 GPM / 45 LPM
Working Pressure 1000-2000 PSI / 70-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight (less bar/chain) 28 LBS / 12.7 KG
Length (less bar/chain) �7 or 40” / 99 or 101.6 CM
Width 9” / 2� CM
Couplers Yes
Whips Yes
Lubrication/Cooling Internal Water Channels in Bar
Aggregate Extra Hard Hard Medium Soft Abrasive
Material Chert Basalt Granite River Rock Marble Limestone Sandstone Flint Quartz
Masonry, Brick, Block, Green Concrete
ApproximateMoh’s Scale
9 8 7 6 5 4 �
Reinforcing Steel Lots of Steel Some Steel No Steel
1” Double Mat Single Mat #5 #4 #� Wire Mesh
Pinnacle - �2Pinnacle - �7
150 in-ft 600-800 in-ft 2000 in-ft
Ultra - �2Ultra - �7
2000 in-ft 1500 in-ft
Saw Chain Wear in-ft
Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
1601253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC TOOLS & ACCESSORIES
Part Number: DL07652Chuck Capacity 1/2” / 12 CM
Flow Range �-10 GPM / 11.�-�8 LPM
Working Pressure 1000-2000 PSI / 70-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 7.8 LBS / �.5 KG
Length 10-1/2” / 26.7 CM
Hydraulic Ports -8 SAE O-Ring
Couplers No
Whips Yes
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
01857 Adjustable Chuck and Adapter, �/4” square x �/4”
04�65 �/4” Chuck, � JT Taper, use 7/16” bits
Drill - DL07652 The Stanley DL07 hydraulic drill is a forward/reverse, variable speed drill with a 1/2” keyed chuck for underwater drilling applications. The DL07 has more than enough torgue to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard.
Part Number: GR29310 - Less CouplersGR2930101 - Couplers, CE
Capacity 9” / 2� CM Wheel
Spindle 5/8 - 11” Threaded
Circuit Type Open Center
Flow Range 4-12 GPM / 15-45 LPM
Working Pressure 1000-2500 PSI / 70-175 BAR
Full Relief Setting 2250 PSI / 155 BAR
RPM �200 @ 12 GPM / 45 LPM
Weight (w/Guard) 15 LBS / 6.8 KG
Length 11” / 28 CM
Width (w/Guard) 10 1/4” / 26 CM
Hydraulic Ports -8 SAE O-Ring
Couplers Varies with model
Whips No
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
02587 Grinding Wheel for Metal, 9”
02588 Grinding Wheel for Masonry, 9”
0�691 Grinding Wheel, 7”
05194 Adapter 5/8-11 thread, depressed center wheel
Grinder - GR29 The GR29 is a right angle grinder that can be used for grinding and cleaning in underwater applications with a variety of wheels, brushes, and attachments. The high torque gear motor drives a standar 5/8-11” threaded spindle. A 9” adjustable wheel guard, two position assist handle and trigger guard are standard.
Hammer Drill - HD45 The feathering on/off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 7�6 Skil hex carbide tipped drill bits and is capable of drilling a 2” diameter hole up to 29” deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts.
Part Number: ID07920 - Less CouplersID0792001 - Couplers, Whips, CE
Capacity 1/2” / 12.7 MM Square Drive
Performance Torque: 500 FT/LBS / 675 Nm
Flow Range 4-12 GPM / 15-45 LPM
Working Pressure 750-2000 PSI / 50-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 7.2 LBS / �.� KG
Length 10” / 25.4 CM
Width 4 1/4” / 10.8 CM
Hydraulic Ports -8 SAE O-Ring
Couplers See Part Numbers Above
Whips See Part Numbers Above
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
05079 Adaptor 1/2” Female sq.dr. x 7/16” QC Hex(Required for Stanley Wood Boring Bits)
Impact Drill - ID07 The ID07 Impact/Drill is two hydraulic tools in one - an impact wrench and a wood drill. The 1/2” square drive impact wrench delivers torque up to 500 FT/LBS and can tighten and loosen nuts and bolts as well as tighten lag screws. Use the ID07 with the 05079 adapter and wood boring bits for drilling 1 1/16” diameter holes in timbers with no reactive torque to the diver.
Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
1621253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC TOOLS & ACCESSORIES
Part Number: IW16350 - Less CouplersIW1635001 - Couplers, CE
Capacity 1” Square Drive
Torque 500-2500 FT/LBS / 680-�400 NM
Flow Range 7-12 GPM / 26-45 LPM
Working Pressure 1500-2000 PSI / 105-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 26 LBS / 12 KG
Length 15” / �8 CM
Width 4.5” / 11 CM
Hydraulic Ports -8 SAE O-Ring
Couplers See Part Numbers Above
Whips No
Impact Wrench- IW16 The Stanley IW16 is a heavy duty 1” square drive impact wrench designed for the toughest underwater bolting applications. Powered by a stanley integral Hyrevz motor, the IW16 has a durable swing hammer impact mechanism with adjustable impact intensity from 500 to 2500 FT/LBS of torque.
Part Number: IW12340C - Less CouplersIW124001 - Couplers, CE
Capacity �/4” / 19 MM Square Drive
Torque 250-1200 FT/LBS / �40-16�2 NM
Flow Range 4-12 GPM / 15-45 LPM
Working Pressure 1000-2000 PSI / 70-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 14 LBS / 6.4 KG
Length 11 1/4” / 28.6 CM
Width 4” / 10.2 CM
Hydraulic Ports -8 SAE O-Ring
Couplers See Part Numbers Above
Whips No
Impact Wrench- IW12 The Stanley IW12 is a medium duty �/4” square drive impact wrench designed for underwater bolting and drilling applications. Powered by a stanley integral Hyrevz motor, the IW12 has a durable swing hammer impact mechanism with adjustable impact intensity from 250 to 1200 FT/LBS of torque. Designed to run from a wide range of hydraulic circuits, this wrench allows underwater bolting in the most extreme applications.
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
16�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC TOOLS & ACCESSORIES
Part Number: IW24360 - Less Couplers
Capacity 1 1/2” Square Drive
Torque 800-�500 FT/LBS / 1088-4760 NM
Flow Range 7-12 GPM / 26-45 LPM
Working Pressure 1800-2000 PSI / 124-140 BAR
Full Relief Setting 2250 PSI / 155 BAR
Weight 4� LBS / 19.5 KG
Length 16 1/2” / 41 CM
Width 5.1” / 1� CM
Hydraulic Ports -8 SAE O-Ring
Couplers No
Whips No
Impact Wrench- IW24 The Stanley IW24 is an extreme duty 1 1/2” square drive impact wrench designed for the toughest underwater bolting applications. Powered by a stanley integral Hyrevz motor, the IW24 has a durable swing hammer impact mechanism with adjustable impact intensity from 800 to �500 FT/LBS of torque.
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
068�0 Hose Whip, 18” Long, -8 SAE x 1/2” NPT
Part Number: SK58310 - Less Couplers
Drill Capacity 3” Diameter Hole, up to 20’ deep
Steel Type 1” x 4 1/4” Hex Shank
Circuit Type Open Center
Flow Range 7-9 GPM / 26-�4 LPM
Optimum Flow 8 GPM / �0 LPM
Working Pressure 1500-2000 PSI / 105-140 PSI
Full Relief Setting 2250 PSI / 155 BAR
Rotation Speed 0-�00 RPM
Weight (less bit) 70 LBS / �1.7 KG
Length 26” / 66 CM
Width (at handles) 18” / 46 CM
Hydraulic Ports -8 SAE O-Ring
Couplers No
Whips Yes
Air Port 1/2” NPT
ACCESSORIESPart Number: Description
0�971 Flush-Face Coupling Set, �/8” NPT
0�974 Flush Face Coupling Set, 1/2” NPT
05177 Carbide Rock Bit, for use with Air, 1 �/8” Diameter, H-Thread - Requires Drill Steel
05178 Carbide Rock Bit, for use with Air, 1 1/2” Diameter, H-Thread - Requires Drill Steel
04914 Carbide Rock Bit, for use with Air, 2” Diam-eter, H-Thread - Requires Drill Steel
05170 Drill Steel for use with Air, 1 x 4 1/2”, H-Thread, 24” U/C
05171 Drill Steel for use with Air, 1 x 4 1/2”, H-Thread, 48” U/C
Sinker Drill - SK58 The SK58 Sinker Drill is a heavy duty rock drill designed for drilling underwater in concrete, rock and masonry. The feathering on/off valve makes starting the bit relatively easy. The SK58 uses industry standard drill steel and can drill up to a �” diameter hole up to 20 feet deep. Air is required to clear holes of debris.
Rental Available!
PARTS AND REPAIR ARE AVAILABLE!
1641253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC TOOLS & ACCESSORIES
Drill Press, Magnetic (Jancy)The Jancy Slugger JMH1200 Hydraulic drill is designed for use underwater or anywhere a spark free environment is required. A permanent magnet and hy-draulic motor eliminates the need for electrical components.
Part Number: 300016.5 GPM @ 2000 PSI
Chuck Size �/4”
Cutter Diameter 2” (Max)
Height 16 1/2”
Length 14”
Width 6 1/4”
Weight (Approx.) 49 LBS
Drill Press, Magnetic (CS Unitec)The HB-4400 is designed for extreme duty applications. Constructed of stain-less steel, this model is ideal for under-water use. A permanent magnet and hydraulic motor eliminates the need for electrical components.
Part Number: HB-44006.5 GPM @ 2000 PSI
Chuck Size �/4”
Cutter Diameter 2 1/16” (Max)
Height 16 1/2”
Length 14”
Width 6 1/4”
Weight (Approx.) 49 LBS
Reciprocating Saw (Widder)The Widder Hydraulic Hacksaw offers an alter-native for those jobs where exhaust air and an electrical drive are not allowed. It features heavy duty construction and has a built-in control valve to set the number of strokes per minute.188005 GPM @ 1500 PSI
The CS Unitec Hydraulic reciprocating saws are ideal for cutting pipe, tanks structural steel pro-files and other materials. Saws can be fitted with blade guides and can handle blades up to �7”.5-1220-00504 GPM @ 2000 PSI
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC TOOLS & ACCESSORIES
SM20 Dewatering Pump The SM20 Submersible Pump is a light weight, self priming hydraulic dewatering pump with a 2.5” NPFT dischrge. SM2043101 - 8 GPM, Steel Impeller
SM2052101 - 5GPM, Urethane Impeller
SM2053101 - 8GPM, Urethane Impeller
2.5” Outlet250 GPM outputWeight: 14 LBS
•••
SM21 Dewatering Pump The SM21 Submersible Pump is a small diameter (caisson style) self priming hydraulic pump with 2.5” NPFT discharge.SM2151101 - 4-9 GPM, Cast Iron
Impeller
2.5” Outlet�00 GPM outputWeight: 23 LBS
•••
SM50 Dewatering Pump The SM50 Submersible pump is a light weight, self priming hydraulic dewatering pump with a �” NPFT dischrge and aluminum housing.SM2043101 - 7-12 GPM, Stainless Steel
Impeller
�” Outlet500 GPM outputWeight: 24 LBS
•••
TP03 Trash Pump
The TP0� trash pump offers 450 GPM output flow and is an efficient way to move liquids with concentrations of solids of up to 25% by volume.
TP0300301 - 7-9 GPM, Urethane Bowl and
Impeller
�” NPFT with �” Camlock500 GPM outputHandles solids up to �” Resistant to petrochemical solventsWeight: 33 LBS
•••••
TP08 Trash Pump
With over 800 GPM of output, the TP08 is capable of pumping high volumes of water, sand, slurries, mud and solids up to 4” in diameter.
TP08013 - 7-10 GPM, Cast Iron Impeller
4” NPFT with 4” Camlock800 GPM outputHandles solids up to 4” Weight: 65 LBS
••••
PARTS AND REPAIR ARE AVAILABLE!
1661253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
HYDRAULIC TOOLS & ACCESSORIES
Fast Flow Hydraulic Submersible Pumps
FF Mini 2” Pump2” Male cam lock discharge400 GPM Flow Rate260’ Vertical head max.4 - 14 GPM Hyd. Flow2800 to �000 PSI input
26 LBS - 16”L x 10”W x 11”H
•••••
•
The fast flow pump, with its heavy-duty impeller blade design, will handle abuse that most other systems cannot. The unique Fast Flow pump design utilizes suction from both sides of the impeller, eliminating the thrust-load problem associated with centrifugal pumps. Ideal for barge cleaning, enviro-pumping, dewatering, light hand jetting and wash down applications, the Fast Flow can easily handle solids and oily waste. Fast Flow has USPTO patents and international PCT patents for this new technology.USPTO Patent #: 6942448
FF Mini 3” Pump
AdvantagesHigh volume flow ratesDouble suction (patented design)Self primingHigh vertical head pressureCan be run dry, without damage!No mechanical seals, thrust wear plates, gaskets, gears, belts, valves, filters, switches or rubber impellers.Small and powerful!
••••••
•
�” Male cam lock discharge600 GPM Flow Rate300’ Vertical head max.4 - 14 GPM Hyd. Flow2800 to �000 PSI input
26 LBS - 16”L x 10”W x 11”H
•••••
•
FF Mini 3” Iron�” Male cam lock dischargeDuctile iron housing600 GPM Flow Rate300’ Vertical head max.4 - 14 GPM Hyd. Flow2800 to �000 PSI input
40 LBS - 16”L x 10”W x 11”H
••••••
•
FF Mini 3” Low�” Male cam lock dischargeIntakes on bottom housing500 GPM Flow Rate230’ Vertical head max.4 - 14 GPM Hyd. Flow2800 to �000 PSI input
�0 LBS - 22”L x 14”W x 1�”H
••••••
•
FF Super 4”4” Male cam lock discharge1150 GPM Flow Rate230’ Vertical head max.4 - 27 GPM Hyd. Flow2800 to �000 PSI input
65 LBS - 17”L x 11”W x 12”H
•••••
•
FF Steel 4”4” Male cam lock dischargeSteel housing1000 GPM Flow Rate200’ Vertical head max.4 - 27 GPM Hyd. Flow2800 to �000 PSI input
91 LBS - 17”L x 11”W x 12”H
••••••
•
FF Steel 6”6” Male cam lock dischargeSteel housing2000 GPM Flow Rate180’ Vertical head max.4 - 40 GPM Hyd. Flow2800 to �000 PSI input
2�5 LBS - �4”L x 24”W x 27”H
••••••
•
FF Twin 4”4” Male cam lock dischargeTwin agitators1000 GPM Flow Rate200’ Vertical head max.4 - 40 GPM Hyd. Flow2800 to �000 PSI input
105 LBS - �1”L x 15”W x 18”H
••••••
•
167202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC TOOLS & ACCESSORIES
High pressure hydraulic quick disconnects.Nipple: VHN-12-12F (3/4”)Nipple: VHN-16-16F (1”) �/4” or 1” Female, SteelCoupler: VHC-12-12F (3/4”)Coupler: VHC-16-16F (1”)�/4” or 1” Female, Steel
Reciprocating Saw BladesHeavy duty 10” blades for use with the CO2� cut off saw.Diamond: 580677Abrasive: Good: 04117-CW1020T Better: 04117-CW1020 Best: 04117-CW1020SR
Cut-Off Saw Blades
Blades for the Wachs guillotine saws.Model SC - 24-405-00Model D - 04-402-00Model SD - LH22086
Standard 7” x 1/8” grinding disc for hydraulic tools. 5/8”-11 arbor.GD7125Grinding disc, 7” x 1/4” used for metals. 5/8” -11 arbor.GD7250Grinding disc, 9” x 1/4” used for metals. 5/8” -11 arbor.GD9250
Pad developed by �M to remove coatings. 7”Pad:048011-18485-2Holder: 04811-09450
3M Coating Removal Pad
Grinding DiscSpiraKut Blades - Grinders5/8” Arbor nutSpirakut Nut: 042002Spanner wrench for the spirakut system.Spirakut Wrench: 043001
SpiraKut Nut and Wrench
HYDRAULIC TOOLS & ACCESSORIES
Heavy duty 6” cup style wire wheel for removing heavy deposits. 5/8” -11 arbor.RAD64000313
Wire Wheel - Cup
High density 6” wire wheel for removal of heavy scale, rust or anything else. 5/8” -11 arbor.RAD64000332
Wire Wheel - Flat
�M Surface Conditioning Pads. (From left to right)17866 - Coarse00645 - Medium04305 - Fine
3M Conditioning Pads
Pad developed by �M commonly used to clear underwater objects of marine growth.AM-3M3 - 9” pad, � density AM-3M5 - 9” pad, 5 density
3M Cleaning Discs
169202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Tools listed are in stock. If you require a tool but do not see it here, please call us!
Moil Point - 1” HexMoil points are widely used as an all purpose concrete break-er. Ideal for use in Stanley BR45 breakers.A210141” x 4-1/4” Hex Shank14” Long
3” Chisel - 1” HexOne of the most versatile chis-els, it can be used to break and score concrete or other sub-stances too soft for the moil point. Great for use in the Stan-ley BR45 breaker.A230141” x 4-1/4” Hex Shank14” Long, 3” Blade
Narrow Chisel - 1” HexUsed in similar situations as the moil point but with a blade rath-er than a point. Used in Stanley BR45 breakers. A220141” x 4-1/4” Hex Shank14” Long
Clay Spade - 1” HexThis thin curved blade is ideal for removal of clay. Used on Stanley BR45 breakers.B203001” x 4-1/4” Hex Shank5-1/2” Blade
Moil Point - 1-1/8” HexMoil points are widely used as an all purpose concrete break-er. Ideal for use in Stanley BR67 and BR87 breakers. A310141-1/8” x 6” Hex Shank14” Long
Narrow Chisel - 1-1/8” HexUsed in similar situations as the moil point but with a blade rath-er than a point. Fits Stanley BR67 and BR87 breakers.A320141-1/8” x 6” Hex Shank14” Long
3” Chisel - 1-1/8” Hex
One of the most versatile chisels, it can be used to break and score concrete or other substances too soft for the moil point. Can be used in Stanley BR67 and BR87 breakers.A330141-1/8” x 6” Hex Shank14” Long
Clay Spade, 1-1/8” Hex
This thin curved blade is ide-al for removal of clay. Used on Stanley BR67 and BR87 breakers.B303001-1/8” x 6” Hex Shank5-1/2” Blade
Cutter - 1-1/8” Hex
Used for efficiently cut-ting asphalt or other soft substances. Ideal for use in Stanley BR67 and BR87 breakers.B305001-1/8” x 6” Hex Shank12” Long
Wedge - 1-1/8” Hex
Used for cutting asphalt or other soft substances when a wedging action is needed. Used in both Stanley BR67 and BR87 breakers.B3100001-1/8” x 6” Hex Shank12” Long
171202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
HYDRAULIC TOOLS & ACCESSORIES
The Barnacle Buster is designed to be used to remove thick buildup of mussels, barnacles or other encrustation from steel, concrete, pilings, seawalls, bulkheads and ships.
It is furnished with a one piece stainless steel housing and attached steel knockers. The standard unit comes with plated hardened steel cutters. It is also available with a heavy duty quick change assembly. Unit comes with a 5/8” - 11 threaded center hole (14mm available) which attaches to standard pneumatic or hydraulic powered tools. 1,000 to 2,000 RPM is suggested for underwater use.
As the tool moves across the surface, the outside knocker bars shatter barnacles and other heavy growth. The rotating hardened steel cutters follow up with a chipping and scraping action which removes the remaining material,
leaving a clean surface. Water passing through the tool keeps the cutting wheels clean. The tool is ecologically safe since it adds no harmful chemicals to the environment. Rotary action displaces water creating a vacuum under the tool. This results in Barnacle Buster being pressed and held against the ship or work surface. Slight pressure on either side of the tool allows the operator to guide it in any direction.
Swirl-Off Tool: 50600
Barnacle Buster: 50810Swirl-Off / Barnacle Buster
Swirl-Off / Barnacle Buster Accessories
506�1 Cutters (Set of 49) Std. Unit5068� Spacers (Set of 49) Std. Unit506�0 Complete 6” Unit, Heavy Duty Quick Change506�1 Heavy Duty Quick Change Cutter Assembly. 50670 Complete 6” Unit with 8 Pointed Tungsten Carbide Cutters50671 Tungsten Carbide Tipped 8 Tooth Cutter Set (21)50684 Axles (Set of 7) fits all 6” Units50685 Inner Retaining Cup, Locks Axles in Place50686 5/8” - 11 Nut
1721253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
WACHS SAWS
Wachs hydraulic operated portable Guillotine Family, cold cut 2” through 24” pipe of all materials as well as solids, such as bar stock and rails. Their compact design and ease of setup provides fast, accurate cutting of pipe for contractors, water departments, gas companies and refineries, petrochemical and processing plants as well as piping applications in the nuclear industry.
Installation time is approximately 5 minutes! A chain pipe vise clamps the saw to the pipe. The machined cast iron “V” saddle base assures square cuts at right angles. It can be mounted on horizontal as well as vertical piping in any position.
The saws require minimal clearance (the model Super C needs as little as 2 1/2” on one side of the pipe). All models feature fingertip feed control. The pipe is cold cut in a matter of minutes. A 6” standard wall steel pipe is cut in only 6 minutes. A 16” dia. 1/2” wall steel pipe is cut in about 20 minutes.
Call us to ask about the size right for your job!
Super C - Cuts 2” through 12” pipe or up to 12.75” solidsModel D - Cuts 6” through 18” pipe or up to 18.625” solids.Super D - Cuts 10” through 24” pipe or up to 24.5” solids.Goliath - Cuts 16” through �2” pipe!
Guillotine Pipe Saw
Clearance
Models
Installation
REPAIRS ARE AVAILABLE!
Rental Available!
17�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Wachs Trav-L-Cutter is a portable milling machine capable of cold cutting and beveling simultaneously on all machinable pipe materials, pipe schedules and pipe sizes from 6” up to 72” O.D. Secured by its own tensioning chain, the Trav-L-Cutter propels itself around the pipe, machining as it travels. It is safe for cold-cutting, it’s also compact and can be used horizontally or vertically.
WACHS SAWS
Wachs Trav-L-Cutter
Rental Available!
Wachs subsea diamond wire saws are designed for underwater cutting of horizontal or vertical pipe, with only four models that cut from 4” to 84” OD. Running on hydraulic power, the wire saw is controlled remotely using the wachs topside control panel or by ROV control operable via zero leak hot stabs. All saws feature lightweight aluminum plate construction, long life diamond wire cutting element, hydraulically operated synchronized clamping arms, self adjusting automatic feed system, and an overload clutch for bow damage prevention.Model WS-1604 - 4” to 16” pipe Model WS-3616 - 16” to �6” pipe Model WS-5230 - �0” to 52” pipe Model WS-8460 - 60” to 84” pipe
Wachs Diamond Wire Saw
Wachs series split frames are the world’s most versatile and comprehensive line of machine tools on the market today. The LCSF is designed to cut, bevel, single point, counterbore and face flanges on pipe and tubing ranging from 2 to 48 inches O.D. on most wall thicknesses and materials. These frames feature quick mounting via splitting to mount around outside diameter of inline pipe. The LSCF models also utilize interchangeable parts and accessories. Each unit incorporates a self-squaring pipe clamping system with integrated, close tolerance legs and wide feet for exceptional stability.Models can be purchased with pneumatic, hydraulic or electric drive operation in a wide array of sizes to meet almost any job requirement. Please call for details.
Wachs Low Clearance Split Frames
The Wachs SUBSEA drill is the perfect drill for subsea and decomissioning projects. The drill is designed to meet needs encountered in the field. Built of corrosion resistant materials and sealed for use in up to �50 feet of seawater, this auto-feed variable speed tool can drill up to 5” diameter holes! The SUBSEA drill features 5” maximum hole diameter, 11.6” stroke, variable speed hydraulic drive which requires a max of 15 GPM @1500 PSI, and incorporates a versatile mounting system.P08-018-000 - Manual Feed DrillP08-018-001 - Auto Feed Drill
Wachs SubSea Drill
1741253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
We offer Kinematics brand power sheaves. Each unit is made of sturdy cast aluminum and is designed to withstand saltwater environments. It has open top construction to slip hoses easily into the block and can achieve speeds of up to 75RPM with its hydraulic motor. The rubber cleats inside help protect hoses.151 - 20” Block, Rubber Cleats158 - 15” Block, Rubber Cleats
20” BlockOpen top designCast aluminum constructionRubber cleatsSpeeds up to 75 RPM
•••••
20” BlockMotor Size Net Pull Sheave Speed Pressure and Flow
12.1” 4000 LBS 57 RPM 2000 PSI @ 20 GPM
Aluminum cleatsSmooth sheave15” Sheave available26” Sheave available
••••
POWER SHEAVE
Spring to Center control valve for two way operation of the power sheave. Heavy duty cast iron construction with brass and stainless internal parts for saltwater environments.252
20” Power Sheave
Rotary Control Valve
OptionsStandard Unit Specifications
15” BlockMotor Size Net Pull Sheave Speed Pressure and Flow
1�.7” �000 LBS 100 RPM 1600 PSI @ 7 GPM
Motors are available in different sizes.
Please call to discuss your options.
Rental Available!
175202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
JET PUMPS
Bay-Tech Industries offers purpose built Jet Pumps. Each pump is custom built to the customers specifications. It starts with pump size 4x3 or 6x5 and goes to engine choice. Each unit comes with a heavy walled steel frame that is galvanized or painted and is tested thoroughly before leaving our warehouse.
Need a Jet Pump for your next job? Let us know. We offer a full fabrication shop to meet your needs.
Custom 4x� Jet Pump with Diesel Engine, Manifold, Custom Paint Scheme and
Skid.
Custom 6x5 Jet Pump with Diesel Engine,
Custom Paint Scheme and “Stackable” Skid
Design.
Custom 6x5 Jet Pump with Diesel Engine,
100 Gallon Fuel Tank and Custom Skid.
Custom Manufactured Jet Pumps
1761253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Custom 6x5 Jet Pump with Diesel Engine,
Aluminum Enclosure, and Louvered Doors.
JET PUMPS
177202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
PUMP
The TUT Series pump is a cast iron, bronze-fitted, multi stage, horizontal split case design. Type TUT pumps are �, 4, and 5 stage. Engineered and manufactured, there are �5 pump sizes ranging from one and one half inch to ten inch discharge. The model shown is used in our jet pumps and has a six inch intake and five inch discharge. The TUT Series pump handles water and other nonabrasive fluids. Applications vary from small, single pump commercial installations to large, multi-pump municipal water supply systems. The Peerless pump gives superior performance in a wide variety of applications.
Pump TUT SeriesType �-Stage, centrifugal opposed impeller, split case
Max. Pressure 400 PSI (27.21 BAR)
Suction Port Size 6” (15.24cm) x 125lb ANSI
Discharge Port Size 5” (12.7cm) x 250lb ANSI
Priming Hand
The multi-stage pump casing material is a minimum of class 40 cast iron. Alternate volutes are reversed, balancing transverse pressures on running members. The bearing bracket supports are cast integral with the lower casing half for permanent alignment of bearings and all rotating parts. Bronze, renewable casing rings are doweled and shouldered in the casing. Cast bronze enclosed type, single suction impellers are carefully machined and are dynamically balanced for vibration-free performance and longer bearing life. Impellers are keyed to the shaft for positive driving. Bronze impeller wear rings are available on the pumps. Stuffing boxes can accommodate several mechanical seal types and a variety of API seal flush
plans. The gland bolts are swing type and made of steel with the 18-8 stainless steel nuts. Stuffing boxes are designed to hold a minimum of five rings of packing with a lantern ring. Split glands facilitate removal for re-packing. Stuffing boxes can be water cooled for high temperature applications. Peerless Pump designs tough, versatile products to meet your pumping needs. The TUT series delivers variety, durability, standardized options and configurations unequalled in the industry.
Features
Peerless Pump - TUT Series
P/N: 5TUT16N3
1781253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Model Description Lift (LBS) Dimensions (in.) Weight (LBS)CB-25 Open Bottom 25 15 x 20 1
CB-50 Open Bottom 50 18 x 25 1
CB-75 Open Bottom 75 20 x 25 1
CB-100 Open Bottom 100 25 x 28 2
CB-200 Open Bottom 200 �2 x �0 �
CB-250 Open Bottom 250 �2 x �8 4
CB-�00 Open Bottom �00 �2 x 46 5
CB-500 Open Bottom 500 �6 x 56 9
CB-1000 Open Bottom 1000 52 x 50 12
CB-2000 Open Bottom 2000 52 x 86 19
CB-5000 Open Bottom 5000 86 x 94 42
CB-12000 Open Bottom 12000 96 x 1�6 80
LIFT BAGS
Open Bottom Lift Bags are very versatile, light to medium duty lift bags. They are excellent for commercial diving and are suitable for most types of underwater lifting and salvage. All but the 25lb, 50lb and 75lb bags have diver actuated dump valves and all are open at the bottom to vent expanding air as they ascend. They are economical, lightweight, and fold into a neat, compact roll for easy handling underwater.
Enclosed Pillow Bags are totally enclosed and have over-pressure valves to vent expanding air as they ascend. The advantage of Pillow Bags over the Open Bottom Bags is that they can attain their maximum lift in much less water. For this reason, they are excellent for raising sunken boats, and for towing jobs. Like the boulder bags and salvage tubes, all pillow bags come with brass quick disconnect fittings attached to a short filler hose (1/4” MPT).
Model Description Lift (LBS) Dimensions (in.) Weight (LBS)CBEP-250 Enclosed Pillow 250 45 x �2 5
CBEP-500 Enclosed Pillow 500 56 x �6 9
CBEP-1000 Enclosed Pillow 1000 50 x 52 1�
CBEP-2000 Enclosed Pillow 2000 86 x 52 22
CBEP-4000 Enclosed Pillow 4000 96 x 75 �7
CBEP-6000 Enclosed Pillow 6000 96 x 87 46
Carter Open Bottom Lift Bags
Carter Enclosed Pillow Bags
Rental Available!
179202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Salvage Tubes are highly versatile in the number of ways in which they can be deployed. They can be used as pontoons for supporting docks and other floating structures and they are also excellent for pipe-laying and other underwater construction projects. Where Salvage Tubes really come into their own is when they are used in raising sunken boats. They can be used vertically to bring the boat out of deep water. When the boat is suspended near the surface, they can be slung under the boat with one end on each side to raise the boat higher out of the water to begin pumping out. In shallow water, two bags can be slung together, one on each side of the boat, like pontoons. They can also be used as rollers for moving beached boats back into the water.
LIFT BAGS
Model Description Lift (LBS) Dimensions (in.) Weight (LBS)CBST-2000 Salvage Tube 2000 29 x 180 �0
CBST-�000 Salvage Tube �000 26 x 264 40
CBST-10000 Salvage Tube 10000 66 x 228 110
Propeller Bags are specifically designed for installing and removing boat propellers, but they are well suited for several shallow water lifting jobs. To stabilize the lift of a heavy prop, it is often necessary to lower its center of gravity by attaching a weight to it’s lowest blade.
Model Description Lift (LBS) Dimensions (in.) Weight (LBS)CBPB-100 Propeller bag 100 27 x 15 4
CBPB-�00 Propeller bag �00 50 x 27 7
CBPB-1000 Propeller bag 1000 72 x 40 15
Boulder Bags get their name from gold dredgers and nugget hunters who use them for lifting boulders in shallow rivers of California’s “mother-lode” country. They are designed to lift from a single point in a minimum depth of water. For example, the 2000 lb lift bag gets it’s total lift in less than three feet of water.
Model Description Lift (LBS) Dimensions (in.) Weight (LBS)CBBB-1000 Boulder Bag 1000 54 x 58 18
Use these heavy-duty lift bags for light salvage, object recovery, construction and scientific applications. Accomplish the same work easier, with more control and for much less expense than with barges or cranes. Features single diver usage, high strength urethane coated nylon, proprietary dump valve, 6000lb rated lift straps with a safe working ratio of 6:1.
Subsalve’s most versatile and easy to use bag they make. This heavy duty urethane coated nylon bag features single point lift, allows maximum lift, proprietary dump valves, straps with a 6:1 safe working ratio and bags over 2 tons come with a 3/4” inflation port and a ball valve for deflation.
Subsalve Open Bottom Professional Lift Bags
Open Bottom Professional Lift Bag Features: Inverted Water droplet design facilitates maximum lift capacity with least possible weight.Equipped with all necessary hardware and ready for useTested prior to shipping
Fabric:High Strength urethane coated nylonSuperior abrasion resistanceHigh resistance to most petrochemicals
•
•
•
•••
Open Bottom Commercial Lift Bag Features: Easy for a single diver to useSuited for remote locationsEasily deployed from small craftMeets IMCA Standard
Fabric:High Strength urethane coated nylonSuperior abrasion resistanceHigh resistance to most petrochemicals
••••
•••
181202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
When you need to float an object close to the surface, use enclosed flotation bags! The bags are able to be configured for a multitude of rigging combinations. They feature high strength, heavy-duty urethane coated nylon shell for superior abrasion resistance, a heavy nylon lifting harness and are equipped with all necessary hardware and is ready for use.
Totally enclosed cylindrical bags are ideal for shallow water salvage, reducing the draft of a vessel or raising an object closer to the waters surface. These bags are equipped with shackles and valves and all necessary hardware and are ready for immediate use.
Subsalve Salvage Pontoons
Enclosed Lift Bag Features: Configure to multiple rigging combinationsUse with single pick pointInvert to use two stainless steel rings at top
Fabric:High Strength urethane coated nylonSuperior abrasion resistanceHigh resistance to most petrochemicals
•••
•••
Salvage Pontoon Features: Available in both standard cylinders and elongated tubesTested prior to shipping
Fabric:High Strength urethane coated nylonSuperior abrasion resistanceHigh resistance to most petrochemicals
•
•
•••
1821253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
LIGHTING
The Gulf Tek Offshore Light Tower is a combination light tower and generator. These heavy duty units are designed to withstand harsh offshore conditions and meet all current USCG standards. The Gulf Tek Offshore Light Tower comes in 4 models from 5kw to 12kw and are rated Class 1 Div 2.
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
MANIFOLD, AIR
ACM2D - No LP alarmACM2DLPA - with LP alarm
Brass manifold2 X air inlets, #10 JIC adapters2 X air outlets, oxygen adapters1 X emergency air inletBrass check valves and relief valve2 X 6”, 0-�00 FSW depth gaugesLow pressure alarm (optional)Emergency shut off valveStainless steel pressure gaugeDurable plastic case
The Amron Model 8��0 is a high/low pressure air control and depth monitoring system. It is a central air control system capable of supporting three divers.
83302 X 44-1�00 series tescom regulators2 X HP and 1x LP connection pointsLow pressure audio alarm50 Micron stainless in-line filterCheck valves on all inputsAutomatic gauge protectorsLength: 20”Width: 25”Height: 20”
•••••••••
Standard Unit Specification
Amron Air Control Box Model 8330
Our Air Control Console for two divers was purpose built for quick setup and breakdown and as a compact air control unit for maximizing space. It features an optional 100 db audio/visual low pressure alarm. The 9v battery powered alarm is set to activate when pressure drops below 120 PSI and reset at 140 PSI. It can also be customized to your requirements.
Air Control Box Model ACM2D
Model Shown With Low Pressure Alarm Installed
Rental Available!
1841253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Bay-Tech Industries also offers custom Gas Racks. Call us to customize yours today!
MANIFOLD, GAS
Bay-Tech Industries, Inc Model GM4D Gas Manifold is a compact and portable unit capable of running up to four divers. This unit can be assembled to meet your specific requirements.
GM4DStainless steel tubing and brass plumbingGas sampling valve with restrictor2 X low pressure inlets4 X high pressure inlets2 X high-flow regulators2 X 6” 0-450 FSW pneumo gauges� X outlets1 X bell outlet1 X 50/50 inlet with 2 x outletsDurable plastic case
Bay-Tech Industries, Inc Gas Manifold is a wall-mountable unit capable of running up to four divers. We have built this specifically to be the most compact we can get it for ease of transport and installation.
Gm3dwmTungum tubing and brass plumbingGas sampling valves2 X low pressure inlets5 X high pressure inlets4 X high flow regulators4 X 6” 0-450 FSW pneumo gauges� X diver outlets1 X bell outlet2 X 50/50 inlets with � x 50/50 outletsBrass inlet check valvesStainless steel inlet pressure gaugesStainless steel in-line filtersWall mount bracketsWeight: 100 LBS
••••••••••••••
Standard Unit Specifications
Gas Manifold - Model GM3DWM
Standard Unit Specifications
Rental Available!
185202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
PRESSURE WASHER
We offer the Cavi-Tek line of subsurface pressure washers. These units are designed to replace water blasters by offering a safer system of barnacle and rust scale removal. It accomplishes this by using cavitation rather than extremely high pressure. The Cavi-Tek units are are driven by a kubota diesel engine and are marine rated and offshore ready. Units are available from 10 GPM @ 2000 PSI (see following page) through 20 GPM @ 4000 PSI.
SEPCO CERTIFIED SKIDCAVI-TEK GUN INCLUDEDUSCG APPROVED FUEL TANK
1861253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
PRESSURE WASHER
We offer the Cavi-Tek line of subsurface pressure washers. These units are designed to replace water blasters by offering a safer system of barnacle and rust scale removal. It accomplishes this by using cavitation rather than extremely high pressure. The Cavi-Tek units are are driven by a kubota diesel engine and are marine rated and offshore ready. Units are available from 10 GPM @ 2000 PSI through 20 GPM @ 4000 PSI. The CTI222GASR is capable of 11 GPM @ 2200 PSI using a gear driven pump. This unit also includes a reel for discharge hose storage.
SEPCO CERTIFIED SKIDCAVI-TEK GUN INCLUDEDUSCG APPROVED FUEL TANK
187202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
PROBES
The Polatrak ROV II is the world’s best-selling, general-purpose, tip-contact cathodic-protection probe. The first CP probe with twin elements, it allows on-line calibration that eliminates time-consuming on-site procedures and greatly reduces user error. The ROV II probe interfaces easily with the ROV, but can also be held by divers. It serves as either a tip-contact or proximity-style probe. If ROV operators prefer to avoid connection with the umbilical, the ROV II probe can be connected directly to Deepwater’s Deep C Meter readout to make the survey system completely self-contained. The CP potentials are displayed directly on a subsea readout viewable with the ROV’s video camera. Like all Polatrak corrosion probes, the ROV II is fully field-serviceable, with plug-in electrode elements and interchangeable components. No battery is required.
Twin ag/agci electrodesProximity or contact probeReplaceable electrodes10,000 FSW ratingDiver held or ROV interfaced
•••••
Features and Specifications
Polatrak® ROV II
The CP Gun outperforms all other available bathycorrometer type devices in both accuracy and convenience. Longer battery life, interchangeable freshwater / seawater electrodes and ultra-bright LED displays (for limited-visibility conditions) make the CP Gun the most user-friendly diver-held CP probe. The dual-electrode elements and readouts coupled with a self-calibration capability make it the most accurate unit offered.
Polatrak® CP Gun
Twin ag/agci electrodesReplaceable interchangeable electrodes (Ag/AgCl or Cu/CuSO4)150 hours operation on two 9V batteries1000 FSW (�00 MSW) ratingIntegral voltage readoutDiver heldNeutrally buoyant
••
•••••
Features and Specifications
1881253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
RADIOS
The Amcom II Helium Unscrambler is one of the most popular radios for deep gas diving. This series includes hand-held push-to-talk microphone and digital helium speech unscrambler.
2825A/24/26-DSP22825A with digital helium unscrambler
The Amcom II Wireless Tender (2825) is a great option when the tender has to move around the deck checking equipment while keeping in communication with the diver. This series includes hand-held push-to-talk microphone and the wireless tender option.Part Number: 2825/24/28FDW2825A with AC Power, battery backup
and wireless tender option
The Amcom III (28�0) is the most versatile and powerful three diver communication system on the market today.
Part Number: 2830A/24AC powered
Part Number: 2830A/24/28FDWIncludes wireless tender, standard
Part Number: 2830A/24/26-DSP228�0A with digital helium unscrambler
The Amcom I is a compact one diver that is powerful enough for two divers. Includes MP� input jack.2810E-1Radio with standard battery
2810ERadio with rechargeable battery
The Amcom II 2820 series is the standard two diver radio Amron offers. This series includes hand-held push to talk microphone.2820AStandard radio w/4 - 6v batteries
2820A/232820 with Battery Charger
2820A/242820A AC powered w/Internal charger
The Amcom II Diver Deluxe (2825) includes hand-held push to talk microphones and separate volume controls for each diver.2825A2 Diver deluxe standard w/4-6v batteries
2825A/232825A with external charger
2825A/242825A AC powered w/Internal charger
Amcom™ I
Amcom™ III 3 Diver RadioAmcom™ II Wireless TenderAmcom™ II 2825 Unscrambler
Amcom™ II 2825 Diver DeluxeAmcom™ II 2820A Standard
B a t t e r i e s :Six Volt: 6v Twelve Volt: 4R25-2/12VAmron Rechargeable: 2823-602
189202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
RADIO & ACCESSORIES
Light and comfortable headset for extended wear. Boom microphone pivots up and down only. Vinyl cushioned adjustable ear pads and rubber coated adjustable headband. Includes 4ft. of straight cord.
Heavy duty headset with boom microphone and color-coded dual banana plugs to mate directly to Amcom communicators.
Hand-held noise canceling push-to-talk microphone pro-vides excellent sound clarity to the diver when used with any Amron radio.
Provides tender mobility around the dive site while maintaining constant communication with the diver. Includes 25ft. of cord.
The Wireless tender option is a perfect compliment for the Amcom series of radios. The unit is designed for the tender to communicate with the diver, hands-free. This unit also allows mobility for the tender while checking equipment and still maintaining contact with the diver.
Part Number: 2829-01Complete unit with chargerPart Number: 2829-03Transceiver with wall chargerPart Number: 2828-04Wireless Headset, single speakerPart Number: 2829-05Battery pack for transceiverPart Number: 2829-07Wall charger for transceiver
The HX�70S is a two way marine VHF radio. It is pre-programmed with all US, Canadian, and International Channels, supports all NOAA channels, and is compatible with 40 LMR channels. It is a rugged and waterproof unit designed for offshore use.
HX370S Marine Radio
The CMP460 is designed for use with the HX series radios but can be used with many other standard VHF hand-held radios. The microphone is fully submersible, and intrinsically safe.
CMP460 Microphone
1901253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
REGULATORS
The 44-1�00 Series is the standard in the GoM today. Tescom’s large piston sensor gives excellent sensitivity. It’s balanced valve design ensures stable downstream pressures.
Large piston sensor gives excellent sensitivityBalanced valve design assures stable downstream pressureLarge hand-knob provides fast low-torque pressure settingsSelf-venting standardAvailable with gauge portsDome and air loaded models availableOptional 6000 or 5000 PSIG inlet with 2500 PSIG outlet
•••••••
Advantages
The 44-4000 Back Bias Pressure Regulator is among the most widely used regulators where maintaining steady pressure is critical.
Tescom 44-4400 Series
High flow: cv = .7 Or 2.0 (Optional)Piston sensedAdjustable bias pressure ranges availableSelf-venting (captured)Compatible with tescom’s air actuators and ER3000 elec-tropneumatic PID controllers
E - Viton CTFE CTFE -15F to +165FM - E.P. CTFE CTFE -40F to +165FP - Kalrez® CTFE CTFE 0F to +165FV - Viton® Vespel® Vespel® -15F to +400F
0- BSP1- SAE2- NPT3- MS��649
08- 1/2”12- �/4”
44-13 1 3 2 08 1
44-40 1 3 E 2 08
44-40 1 3 E 2 08
44-13 1 3 2 08 1
191202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Western Enterprises regulators are some of the best regulators in service in the GoM today. Heavy brass and steel parts make this regulator able to withstand the most harsh offshore environments. Two models available: Air and Oxygen. Details are listed below.
The 26-2900 series Back Pressure Regulators are high flow negative spring bias regulators used mainly in BIBS applications.
Tescom 26-2900 Series
Balanced stern design eliminates the need to adjust bias over a wide range of operating pressures.High flow capacity: cv = 2.0Diaphragm sensedLow accumulationMounts in any positionChoice of stainless steel or brass construction
The model 87� regulator is a piston-type hand loaded regulator. It utilizes a balanced poppet design for high flow and minimum effect of inlet pressure on outlet pressure. The poppet assembly is contained in a cartridge with internal filtration permitting very easy in-field servicing. The low cost poppet cartridge is factory pre-assembled. It contains the more critical valve elements of the regulator thus eliminating in-field servicing problems. The regulator is self-venting but is optionally available without the vent. This regulator design was developed for gas mixtures for commercial diving where high flow, very precise pressure control and high reliability are needed. They have served this application for many years. It is available with different size sensing pistons resulting in a complete range of outlet pressures. A highly sensitive dome loaded version rated to 6000 PSI is also available.
Flow Coefficient (Cv): 0.8 (0.23” orifice)Rise of Outlet Pressure with drop of inlet pressure: 1 PSI per 1000 PSI (Model 873-150)Materials: Aluminum, Brass, Stainless SteelFittings: 1/2” NPT Outlet Port 1/4” NPT Inlet and Gauge PortsSize: 3” Dia x 5” Long
•••••
REGULATORS
Operation of high flow, low pressure equipment such as sirens from high pressure air tanks. Component testingAir tank fill stationsFire fighting air systemsInstrumentation and calibration panelsProcess industry controlShipboard and offshore air and gas controlAircraft service equipmentElectronic industry rare gas flowVehicle cng stationsPrecision gas mixing equipment
•
••••••
••••
Applications
Model 873 Specifications
Aqua Environment Regulators
Rebuild Kit: 979-400
19�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Permanent, high strength repairs and sealing for all types of gear. The industry standard for durability. 10114
High viscosity food grade lubricant for o-rings and other gaskets. .25 oz.26120
High viscosity food grade lubricant for o-rings and other gas-kets. 1.5oz.26414
Compound has good re-sistance to most chemicals, a wide service temperature range and excellent water resistance.DOW111
Oxygen compatible grease for lubrication of parts in a high oxygen environment. 2 oz.MCG111
7�2 silicone sealant has a good resistance to most chemi-cals, a wide service temperature range and excellent water resis-tance.DOW732-CL47
SEALANT & LUBRICANT
Wet Suit Repair and Sealant
Cotol 240
Dow 732 Sealant
Silicone Spray Silicone Lubricant
Dow 111 Silicone
Christo LubeSilicone Lubricant .25oz
Seal cement accelera-tor. 4 oz.12414
Seal Cement
Electrical insulating com-pound by Dow. 5.�oz tube.DOW4
Dow 4
1941253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
SPLASH ZONE & SYNTHO GLASS
Splash zone is a solvent-free patching compound used forRepairing pits, cracks and voids in steel, concrete, wood and other surfaces. Splash zone has the unique ability to be mixed, applied and cured underwater.Splashzone - 2 part kit
Designed for underwater and other wet applicationsCan be applied up to 2” thicknessSelf-priming on most surfacesRapid cure characteristicsVoc compliant to current aim regulationsDry film thickness:
Syntho-Glass® is a patented, pre-impregnated resin fiber-glass cloth that can be activated in salt or fresh water. Each roll is packed in a sealed foil pouch and is ready to use. Syn-tho-Glass® needs no mixing and can be applied even under-water. It gives you the ability to repair pipe of almost any diameter in minutes and saving you thousands of dollars in labor and parts while reducing downtime.
SG25: 2” x 5’SG39: 3” x 9’SG415: 4” x 15’SG420: 4” x 20’SG430: 4” x 30’SG450: 4” x 50’
••••••
Sizes
Syntho-Glass®
Specifications
A-788 Splash Zone - Underwater Epoxy
SG620: 6” x 20’SG630: 6” x 30’SG650: 6” x 50’SG830: 8” x 30’SG850: 8” x 50’
•••••
How much Syntho-Glass® do I need?�.14 x Pipe Dia. x Number of Layers (2 Minimum) x Length of pipe to cover = SG Needed (in Feet)Width of Roll
195202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
The Nautilus Magnetic Particle test kit is a great test kit that is used in many applications. The complete kit comes with electromagnet, 500’ of cable and AC/DC converter for the electromagnet. NAUTILUS-PS
TESTING, MAGNETIC PARTICLE
For testing magnetic field and the solution.MP-001-PG
Reference cell, includes 1’ of 18ga test lead wire.SRE-004-SF13
Plastic applicator bottle for Mi-Glow powder solu-tion.BOTT-4oz
Agra Reel shown with weight and 250’ of 18ga. wire for refer-ence cell.AR-004
Digital multimeter by Amprobe.AM-105
Stainless Steel Pit Gauge w/Leather case.PIT-PG01
Magnetic Particle Test Kit
MultimeterTest CellReelReference Cell
Applicator BottleMi-GlowPit GaugePie Gauge
Rental Available!
1961253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
The Cygnus 1 is one of the only ultrasonic thickness gauges that is fully submersible in salt water. This unit has been pressure tested to �00m and features rugged, shock proof protection, stable calibration, a large, bright LED display for poor visibility and rechargeable batteries with charger. With the Cygnus 1, there is no need for coating removal.
Double o-ring sealRemote probeLarge LED displayHeavy-duty constructionTested to �00m
•••••
Topside repeaterDatalogger
••
The Cygnus 2 features Single crystal probe to ensure accurate measurements on curved and heavily corroded back walls. It’s also shock proof and environmentally sealed. For underwater use, the probe (up to 300’) can be sent down with the diver while the display stays topside. There is no need for coating removal with the Cygnus 2 as it reads only metal thickness.
Remote probeLarge led displayHeavy-duty construction
•••
Cable (up to 300’)Datalogger
••
TESTING, ULTRASONIC
OptionsStandard Unit Specifications
Cygnus 1 - Ultrasonic Thickness Gauge
Cygnus 2 - Ultrasonic Thickness Gauge
OptionsStandard Unit Specifications
ACCEPTED BY ALL MAJOR CLASSIFICATION SOCIETIES
The wrist-mounted Cygnus Dive is the latest innovation in hands free ultrasonic thickness measurement. This unit is simple to operate and features rechargeable batteries that give up to 10 hours of run time, can measure through coatings and has a large display so divers can read it easily.
2.4” Display1 Meter coiled cable with probeRechargeable battery pack�00 Meter depth ratingA-scan displayInternal memory
••
••••
Topside repeaterTsr video overlayHelmet view
•••
Cygnus Dive - Ultrasonic Thickness Gauge
OptionsStandard Unit Specifications
Rental Available!
197202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
UMBILICALS
Our divers umbilicals are built to industry leading standards. Diving is a tough job and our hoses stand up to the demanding work. Each hose is seized at the D-Ring as well as every 10 feet for the first 50 feet and every 50 feet thereafter for half the length of the hose. Each member of the hose is added in and taped individually. Once the members are added, the umbilical is completed with multiple wraps of high strength tape. Each umbilical is hydro tested at 400 PSI with a 200 LB axial load on the fitting. Certificates are provided.
Before tape is applied at the d-ring.
Gates ��HB divers hose4-Part communications wire250 PSI pneumo hose�/8” Safety lineStainless steel d-ringHeavy-duty tapeTaped every 8”-10”ADCI color codedNylon seizingBrass oxygen adapters20’ Tails on topside endTested: pressure: 400 PSI
Pull: 200 LBS
••••••••••••
Custom configurationCustom lengthsNeutrally buoyant divers air hoseHot water hoseVideo cable
•••••
�/8” I.D.Weight: 21 LBS per 100’1000 PSI working pressureTemperature Range: -40-200oF
••••
Gates Hose Specifications
Divers Umbilical
Standard Umbilical Specifications Options
Bay-Tech Industries, Inc’s procedure is in accordance with the following:ADC Consensus Standards for Commercial Diving Operations Section IV-A,B & C
U.S. Coast Guard 46CFR-197.312OSHA 29CFR-1910.430
U.S. Army Corps of Engineers 30.E.06
Umbilical Protection Heavy Duty nylon sleeves for hose protection. Available in slip on or velcro closed units in lengths of up to 150’ for the velcro and 300’ for the tubular sleeve.
SL 2.0 Urethane coated material for maximum abrasion resistance. Velcro closure. Will work with most 4 part umbilicals.
Diamond Back 60Tubular hose sleeve made of a six needle knit polymide.
1981253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
UMBILICALS
UI umbilicals, incorporating Aquaflow, Texflow and Flexflow hoses allow the professional diver to be safer and more productive by making life easier, underwater and on deck. The unique materials and cabled “rope-like” construction combine to produce the most flexible, controlled buoyancy umbilicals available today. With no need for tape, much reduced repairs, and longer life, UI umbilicals not only improve diver efficiency they actually reduce costs for the operator. Along with diving hoses and life support umbilicals of alltypes Umbilicals International (UI) offers a full range of underwater cables for all your project needs. See our cable data sheet for standard designs or contact us for custom requirements.
3/8” Aquaflow hose1/4” Aquaflow pneumo hoseComm wire/life line
1/2” Hot water hose3/8” Aquaflow hose1/4” Aquaflow pneumo hoseComm wire/life line
1/2” Hot water hose3/8” Aquaflow hose1/4” Aquaflow pneumo hoseComm wire/life lineVideo cable
1/2” Hot Water Hose1/2” Reclaim Hose3/8” Aquaflow Hose1/4” Aquaflow Pneumo Hose1/4” Hat Light Cable
Comm Wire/Life LineVideo CableHat Light Cable
UDT0108UDF0105
UDA0104UDA0204UDA0103
Custom umbilicals are available.
Please call us about our
Bell Umbilicals!
199202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
UMBILICALS
Description Cross Section
Main Bell UmbilicalHDR0112 3/4” NB Reflow Gas Reclaim Hose
HDF0312 3/4” NB Flexflow Gas HoseHDF1212 3/4” NB Flexflow Hot Water Hose
HDF0308 1/2” NB Flexflow Gas Hose5 x HDR0304 1/4” NB Flexflow Pneumo Hoses
Power Cable �4 x 14 awg CoresComm/Video Cable 4 x 75 ohms, � x 16 awg Screened Twisted
Quads, 7 x 16 awg Cores, and 14 x 16 awg Cores.Polyethylene Braided Jacket
Wet Bell UmbilicalHDF1212 3/4” NB Flexflow Hot Water Hoses
2 x HDF0308 1/2” NB Flexflow Gas Hoses4 x HDF0304 1/4” NB Flexflow Pneumo Hoses
� x CDR010411 Comm Cable w/ 2x 20awg Screened Twisted Pairs
2 x CDX010710 Video Cables w/ 1 x 22awg Screened Twisted Quad, 2 x 18 awg Cores, 1 x 75ohm Coaxial Cables
Polyethylene Braided Jacket
Habitat UmbilicalCentral Polyester Rope Strength Member2 x HDF0308 1/2” NB Flexflow Gas Hose1 x NDF0306 3/8” NB Flexflow Gas Hose2 x HDF050� �/16” NB HP Oxygen Hoses
Power Cables: 2 x 4awg CoresComms Cables: 12 x 18awg Screened Twisted Pairs
Video Cable: 3 x RG213 Coaxial CalbesPloyethylene Braided Jacket
Subsea Tools1 x HDF0110 5/8” NB Flexflow Hydraulic Hose1 x HDF0112 3/4” NB Flexflow Hydraulic Hose
CDX010408 Power Cable, � x 16awg CoresPolyethylene Braided Jacket
Welding and Burning1 x HDF0308 1/2” NB Flexflow Gas Hose
2 x 2/0awg Copper Welding CablesPolyethylene Braided Jacket
2001253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VALVES
Valves listed are in stock. Don’t see the one you’re looking for? Call us!Stainless Steel Valves Available on Request! Many other brands of valves are available!
Size Example In Out Pressure Rating Special Manufacturer Part Number
1/4”
1/4” FPT 1/4” FPT 500 PSI Panel Mount Specialty 6610290
1/4” FPT 1/4” FPT 500 PSIPanel Mount,
�-WaySpecialty 6620290
1/4” FPT 1/4” FPT 600 PSI - Apollo 70-101-10
1/4” FPT 1/4” FPT 600 PSI - Parker P-V500P-4-02
1/4” FPT 1/4” FPT �000 PSI Panel Mount Hoke HO-7115F4B
1/4” Tube 1/4” Tube 2500 PSITube Fittings, Panel Mount
Size Example In Out Pressure Rating Special Manufacturer Part Number
1/4”
O2 1/4” MPT 250 PSI - Western W-207
1/4” MPT 1/4” MPT �000 PSI - Western W-211
1/4” FPT 1/4” MPT �000 PSI - Western W-217
1/4” FPT 1/4” FPT �000 PSI Panel Mount Hoke HO-�812F4B
1/4” Tube 1/4” Tube �000 PSI Panel Mount Hoke HO-D�712G4B
Needle Valves
201202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
VALVES
Valves listed are in stock. Don’t see the one you’re looking for? Call us!Stainless Steel Valves Available on Request! Many other brands of valves are available!
Size Example In Out Pressure Rating Special Manufacturer Part Number
1/4”
1/4” FPT 1/4” FPT 400 PSI Ball/Cone Apollo 61-101-01
1/4” FPT 1/4” FPT �000 PSI High Pressure Hy-Lok CV1-F-4N
1/4” MPT 1/4” MPT �000 PSI High Pressure Hy-Lok CV1-M-4N
1/4” MPT 1/4” FPT 6000 PSI High Pressure Aqua Environment 955
1/4” FPT 1/4” MPT 6000 PSI High Pressure Aqua Environment 955R
1/2”
1/2” FPT 1/2” FPT 400 PSI Ball/Cone Apollo 61-10�-01
1/2” MPT 1/2” MPT 800 PSI High Pressure Circle Seal CS-2259B4-MM
1/2” FPT 1/2” FPT �000 PSI High Pressure Circle Seal CS-249B-4PP
1/2” MPT 1/2” FPT 6000 PSI High Pressure Aqua Environment MOD684
�/4”�/4” FPT �/4” FPT 400 PSI Ball/Cone Apollo 61-104-01
�/4” MPT �/4” MPT �000 PSI High Pressure Hy-Lok CV5-M-12N
1” 1” FPT 1” FPT 400 PSI Ball/Cone Apollo 61-105-01
Size Example Pressure Rating Special Manufacturer Part Number
1/4” MPT
100 PSI - Kingston 112CSS-2-100
150 PSI - Kingston 112CSS-2-150
175 PSI - Kingston 112CSS-2-175
200 PSI - Kingston 112CSS-2-200
225 PSI - Kingston 112CSS-2-225
250 PSI - Kingston 112CSS-2-250
�/4” MPT70 PSI - Kingston 114-5-070
1�5 PSI - Kingston 114-5-1�5
Relief Valves
2021253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VIDEO & DATA MANAGEMENT SYSTEMS
AXSUB’s Diving Data Manager System is the most advanced flexible and portable diver management platform ever built. When combined with the AxSEE 57i Smart Camera, the AxDEPTH 57S (single sensor) or 57D (dual sensor), the divers parameters are monitored and transmitted to the AxDDM for immediate analysis and storage. Along with the sensor data, the unit can record MP-4 video and can take stills which can be accompanied by notes the supervisor adds, all while continuously recording. The AxDDM assists the diving supervisor by allowing confident decisions to be made by providing accurate real-time data of the dive. Data can also be customized by allowing users to add or remove features per job. Custom, company-based diving tables can be integrated into the system if required.
AxDDM Diving Data Management System
Compact size with rugged components
12 Inch sunlight viewable resistive touchscreen
Available uninterruptable power supply in case of
power failure
Pre-Dive Mode that allows you to configure dive
team and requirements
Dive Mode to monitor depth, water temp, and
ascent rates (with optional sensors)
Decompression Mode with real-time
decompression schedule available
Digital Audio-Video Mode with on-screen
display
Gas Monitoring Screen with built-in alarms
(when combined with AxGAS)
Generates paper and PDF reports for logbooks
Allows remote access through wi-fi or ethernet
cable
Project management interface available
•
•
•
•
•
•
•
•
•
•
•
Video Input: 1 or 28 Pin Input: 1 or 24 Pin Input: 1 or 2L.E.D. Output: 2 (24 VDC)L.E.D. Dimmers: 2RCA Audio Input: 1USB Input: 2Ethernet Input: 1Speaker Output: 2 WattsVideo Format: H.264/MPEG-4RCA Composite Video Output: 1 or 2Approximate Weight: 8.4 LBSDimensions: 14” L x 12” W x 2” D
Diver’s depth: 0 to 440 FSW (134 MSW)
Water temperature: 28° to 100° F (-2° to 38° C)
Ascent rate: feet per minute
Bottom and total dive time
Decompression schedule (optional)
Audio and video
Other compatible sensors available on request
•
•
•
•
•
•
•
Monitored and Logged Parameters
General Specifications
20�202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
VIDEO & DATA MANAGEMENT SYSTEMS
AxVIEW Camera Viewer & LED Controller
AXSUB’s AxVIEW is an entry level self contained camera viewer and LED light controller. It acquires video signal, supplies power to the diver’s camera and lighting system as well as gives the option of an uninterruptable power supply that switches to a 24 Volt auxiliary source (B05Ah-24 VDC) in case of a power failure. It is a rugged, weatherproof system that is compact and integrated with industrial or military components which are compliant with today’s highest electrical and electronics standards. Because it is an entry level device, you choose your options & you get what you need! Options include a foldable 7” weatherproof LCD screen, a numeric video encoder with USB output to your computer with AXSUB Software, which converts the video signal to MP-4 format, and an on-screen display unit that will enable the AxVIEW to engrave customized information in the video recording. With the AxVIEW V, the AxVIEW software to be installed on your computer is provided.
Completely adaptable to fulfill your present
and future requirements
Weatherproof
Compact and rugged components
Integrated uninterruptable power supply (you
need at least one battery pack B05Ah-24VDC)
Safe low voltage output to the diver (24 VDC)
Video output and Audio input
•
•
•
•
•
•
Standard Unit Specifications
Video Input: 1 (Analog)Video Output: 1 (RCA or BNC)Audio Input: 1 (RCA)LED Output: 1 (24 VDC)LED Dimmer: 0 to 100%Power Inlet 1: 100-240 VACPower Inlet 2: 24 VDC
Approximate Weight: 4.2 LBSDimensions: 11” L x 8” W x 1.75” D
Recommended Accessories
AxLIGHT 57 LED lamp
AxSEE 57 camera
AxSEE 57i smart camera
AxDEPTH 57 depth sensor with dive profile and
decompression capability
AXSUB Software to enable digital audio/video
recording and REAL TIME depth monitoring
Portable 24 VDC lead acid battery system for
auxiliary power source
•
•
•
•
•
•
2041253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VIDEO & DATA MANAGEMENT SYSTEMS
The AxLIGHT 57 is a high performance underwater lighting system that has been designed with low maintenance and operating cost in mind. It utilizes an energy efficient and long lasting L.E.D. matrix mounted on an anodized aluminum heat sink. This enables a life expectancy of 50,000 hours or 6 years of continuous operation.
AxLIGHT 57 L.E.D. LightDelrin® housing with scratch resistant polycarbonate lens1000 FSW (�00 MSW) depth ratingWater-cooled with innovative heat sink1,�20 Lumens120° beam angle24 VDCVariable intensity control ready (with AxVIEW or AxDDM)
•
•
•
••••
Features
The AxSEE 57 Camera is a top performance underwater camera system that has been designed with low maintenance and operating costs in mind. It utilizes the latest camera technology to provide cutting edge high resolution video to the user.
AxSEE 57 Color CameraDelrin® housing with scratch resistant polycarbonate lens1000 FSW (�00 MSW) depth ratingHigh resolution 700 HTV linesIntegrated noise reductionAutomatically switches between black and white and color.12 VDC power98 ° field of view underwater
•
•
•••
••
Features
The AxSEE 57i is a technological breakthrough that allows the diving supervisor to get high picture quality and real time data from the integrated electronic depth meter and water temperature sensor. With the AxDDM or AxVIEW and this camera, you will have the perfect tools at your disposal to improve your safety and efficiency.
AxSEE 57i Smart CameraDelrin® housing with scratch resistant polycar-bonate lens1000 FSW (�00 MSW) depth ratingElectronic depth meter and temperature sensorHigh resolution 700 HTV linesIntegrated noise reduction
•
•
•
•
•
Features
Can be used with both AxDDM and AxVIEW
Can be used with both AxDDM and AxVIEW
Can be used with both AxDDM and AxVIEW
205202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
VIDEO & DATA MANAGEMENT SYSTEMS
AxDEPTH 57S & 57DDelrin® housing rated to 1000 FSWRedundant sensor available (57D)Standard sensor capable of reading up to 1000 FSW at ±1.0 FSW accuracyOptional sensor capable of reading up to ��� FSW at ±0.� accuracyOperating Temp: -40°C to 100°C
•
•
•
•
•
Features
The AxGAS 2A-P is a portable gas analyzer designed to measure pressured dew point and carbon monoxide concentration in the air or mix gas being used. With the AxGAS, you can prevent incidents before they occur. These can include CO poisoning, helmet regulator freezing and bacterial contamination in the umbilical. A rack mounted system is also available. This version can test air quality continuously and it is fully compatible with the AxDDM Dive Data Management System for real time monitoring, logging and alerts.
AxGAS 2A-P Gas Analyzer
Fully portable compressed air analyser
Rugged and waterproof system
Built-in regulators
Fast response time
High precision dew point sensor for a direct
measurement of line pressure
Can be connected via bluetooth to an external
thermal printer
Li-ion batery operated with integrated smart
charger
•
•
•
•
•
•
•
Custom sensor configurationUp to 7 sensors available for AxGAS UnitSensor Readings Available: Pressure, Temperature, Dew Point, Water Content, Carbon Monoxide, Carbon Dioxide, Oxygen and Methane (special order)Rack mounted system for continuous measurement and integration with AxDDM
•••
•
Options and Features
The AxDEPTH 57S and 57D are Depth and Temperature Sensors for use with the AxDDM or AxVIEW V. The 57S features a depth and temperature sensor capable of reading up to 1000 FSW. The 57D features redundant sensors (2 x depth, 2 x temp) also capable of reading up to 1000 FSW. The 1000 FSW sensor is accurate to ±1.0 FSW. For greater precision, the 57S and 57D are available with a ��� FSW sensor accurate to ±0.� FSW.
Can be used with both AxDDM and AxVIEW
2061253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VIDEO SYSTEMS - BTI CONSOLES
The UWV09 is a color video monitor system that offers multi-purpose applications: construction, inspection, search and rescue, and marine research. This unit is a self-contained transportable system. It comes standard with a 15” LCD monitor, DVD recorder and power supply. A color video camera, 150w light, and 600’ of cable (in a box or on a reel) are available with the system (please see part numbers below). Options include: Viperfish Nitro and a smart mic The controls for the camera and light are easily accessible at the front of the unit. The unit features variable control light switch, audio, cable service light, front panel umbilical connection, front door compartment storage and built-in ground fault interrupter (GFI) and isolation transformer for user’s safety.P/N: UWV09-C Video System Console with DVD/R P/N: UWV09-N Video System w/Viperfish Nitro and DVD/R
12 VDC power consumptionColor CCD 1/� formatLow Illumination: 0.1 LUXHigh Resolution: 560 lines�.6mm lens92o Field of viewVideo Output: composite signalDepth Range: 3300’ (1000m)Stainless steel housing
•••••••••
110v AC/60 Hz150w High intensity bulbStainless steel housing
Power supply for video systems. 115 VAC power with built in GFI unit accommodates power for light, camera, mics and cable. (Please specify DVD or Viperfish on order.) VF2DVD
Character generator for UWV09 video system with 24 Hour time and date.DTT-RCMP
Replacement bulb for LIGH-VID-2001, 150w.BT108
Replacement connectors for the video cable and power supply.Female: AMPH-PMMale: AMPHE-M-ASSY
UWV Console (ONLY)
Amphenol ConnectorBulb, 150wCharacter Generator
Power SupplyWe have designed a reel for video cable. Includes rubber feet, wheels, swivel, a brake and is powder coated for durability. DOES NOT INCLUDE CABLE. CR-10
Video Cable Reel
VIDEO SYSTEMS - PARTS & REPAIR
Female Male
� Conductor data cable for use with systems that require twisted pair. Consists of 1 x 22 shielded twisted pair and 2 x 22 AWG conductors.DC-B - Data Cable, Bare
Data Cable
Video & Data Cable6 Conductor jacketed cable designed to be used with video and data management systems. Wiring consists of: (2) x 16AWG, (2) x 20AWG, (1) x 22AWG Coax & (1) x 22AWG shielded twisted pair.VDC-J - Data Cable, w/jacket
Video & Data Cable6 Conductor cable designed to be used with video and data management systems. Wiring consists of: (2) x 16AWG, (2) x 20AWG, (1) x 22AWG Coax & (1) x 22AWG shielded twisted pair.VDC-B - Data Cable, Bare
2081253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VIDEO SYSTEMS - PARTS & REPAIR
160GB Replacement or Spare hard drive for Viperfish Nitro.VF-MSX-CR-160
Viperfish Nitro Hard DriveAdapter for Viperfish Nitro, USB to Ethernet. VF-USB/ETH
USB to Ethernet Adapter
Microphone for use with viperfish digital video systems.SM01
Smart Mic - Viperfish
USB 2.0 Cable for use with Viperfish video systems.VF-USB
USB 2.0 Cable
Dual head USB 2.0 Cables for use with Viperfish Video Systems.VF-USB-DUAL
Dual USB 2.0 Cable
Microphone for use with viperfish digital video systems.BT-SM02
BTI Microphone
24v Helmet light with 2 pin connector and mounting bracket.HL24Replacement Bulb:HLB24V/50W
24v Helmet Light
Replacement uni-directional mic for video systems.10-22
Microphone
209202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
Single splice Kit3M-82-F1“Y” splice Kit3M-82-BF1
Resin Refill, 8oz: 2130B
Used in applications for seal ing items that will be exposed to oil, water or burial. Can is supplied with applicator brush.3M-SK-15
Meets industry specifications and has excellent physical and electrical properties which provides moisture seal and voidless build-up.3M-130C
�M invented vinyl electrical tape and sets the industry standard for quality with a tape for almost every application. Comes in a range of color. Please specify: White, Yellow, Orange, Red, Green, Blue, or Black. 3M-1700C-color(specify color of electrical tape on order)-Black = Black -R = red -G = Green -B = Blue -W = White -Y = Yellow -O = Orange
Tape
VIDEO SYSTEMS - PARTS & REPAIR
Custom 6 pin male by 5 and � pin female connector allows quick swap-out of damaged video con-nectors. (Video cable must have 6-Pin Female).BTCY-6-3-5
6-Pin Y-Splice Cable
2101253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Machined and fabricated by Bay-Tech Industries, this new modular camera and light mounting system is designed to swap from helmet to helmet in seconds. The quick release mounting bases are machined from aluminum for durability in harsh offshore and inland conditions. The Camera and Light are secured to Delrin bases via a stainless clamp for quick removal should a repair be necessary.
This system is composed of three main parts.
1. The Helmet BracketGenesis Helmet, Right Side - P/N: GRH1Genesis Helmet, Left Side - P/N: GLH2Proteus Helmet, Right Side - P/N: PRH1Proteus Helmet, Left Side - P/N: PLH2
Available for other helmets. Please call for details.
2. The Quick Release Quick Release - P/N: BCQR2008
3. The Delrin CradleDelrin Base, Camera - P/N: BCD2008ADelrin Base, Light - P/N: BLD2008A
Complete Assembly (less camera and light)Genesis, Left Side - BCG09-LH-ASSYGenesis, Right Side - BCG09-RH-ASSYProteus, Left Side - BCP09-LH-ASSYProteus, Right Side - BCP09-RH-ASSY
••••
•
••
••••
1
2
3
Bay-Tech Camera/Light Mounting System
VIDEO SYSTEMS - PARTS & REPAIR
Slide base out and transfer to new helmet
Push Lever up to release the lock
Modular Design To Fit Brackets For Any Helmet
Camera and Light Swapping Made Easy
211202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
VIDEO SYSTEMS - VIPERFISH NITRO
Designed for top-side applications, the Viperfish Nitro is a high performance shock and vibration proof digital recorder that converts analog video to digital format. It records high resolution video (720x486), full speed �0 frames per second. The high performance digital platform, Optophore 1 combines a 1GHz processor board with wavelet compression. Wavelet compression searches the entire field or each frame at once resulting in no blocking of artifacts. The result is clear, crisp, non-jerky and non-multiplexed video.
The new Optophore 1 digital platform combines Linux real time operating system with a wavelet compression resulting in clear non-fuzzy video. That’s because unlike other compression schemes Wavelet performs a detailed mathematical analysis of the entire field or each frame at once - unlike MPEG which only records the changes in each field. The performance comparison between Wavelet and MPEG compression is most noticeable when there is motion detected - which is over 98% of the time in all applications.
High resolution (720x486)Full speed �0 frames per secondSingle channelClear, non-jerky, non-multiplexed videoScalable to 640x480Record and view simultaneouslyRemote record triggerAlarm verificationLcd menu for grouping and downloading
VideoShock and vibration testedEmbedded linux operating system120 Gb removable hard driveInternal gps with antenna
•••••••••
••••
Features such as adjustable frame rate and adjustable picture quality allow you to choose the quality of the image you wish to record. You can record and view video simultaneously. Over-lay audio on disk to record important thoughts you have at critical times during your project. The Alarm Verification feature allows you to mark on all disk important incidents. All alarms can be grouped quickly and easily through the LCD menu. You can group video by alarms, clip to clip, date and time or manual fast forward or rewind. The text overlay feature allows you to overlay up to 20 characters which are viewed on screen dur-ing recording and playback - ideal for job man-agement.
The Viperfish Nitro gives you several options to view recorded video. The hard drive trade named COMRAD is a combination reader and hard drive. COMRAD can be removed and connected to a desktop PC for viewing or emailing video clips. The Viperfish viewer makes viewing the videos easy. If you prefer to download video from Viperfish Land to a separate hard drive, it can be done fast through the USB 2.0 port. On the job you can connect a laptop or analog TV directly to a Viperfish Land for viewing high resolution video while you record.
Downloading and Viewing VideoReliability and Clarity
Key Features and Benefits
Viperfish Nitro
2121253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Built in LCD Screen for Easy: Programming Video Playback Video Search, Group and Download Recording Preview
Automatic Daylight Savings Time AdjustmentOn Screen Characters (up to 20 for reference)Adjustable Recording Quality: Low, Med, HighAdjustable Framerate 5-�0 FPSInternal Voltage RegulationSoftware Upgrades via InternetSingle Channel
Internal GPS Receiver
•
•••••••
•
Audio VideoVideo Signal System NTSC or PALVideo Input 1 Video InputVideo Input Signal 1.0Vp-p 75 OhmsVideo Output 1 Video MonitorVideo Output Signal 1.0Vp-p 75 OhmsAudio Input 1 Audio InputAudio Output 1 Audio Output
Internal Voltage RegulationOperating Range 8-25vOutput 12vMaximum load � ampsBattery Jump Will accept double jump max �5vFilter Range Filters up to 500v spikesFuses Double end design
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
VIDEO SYSTEMS - VIDEO CAMERA HOUSING
The Amphibico EVO HD Elite camera housing is a marine grade aluminum housing rated to ��0 FSW built specifically for select Sony® HD Camcorders.
The housings key features are a large �.5” LCD display, camera controls at your fingertips, a moisture alarm, hydrophone, and can be equipped with a number of accessories for professional videos underwater.
Amphibico Video Camera Housing
Specifications and Features
3.5” Color monitor viewfinder at 10° angle Record/standbyElectronic-one-touch white balance (select models)Mechanical white balance (select models)Variable speed telephotoVariable zoom speedPhoto (direct to hard drive or memory stick)Toggle between manual to auto focus lockImage mode change (camera/photo)Flashing green tally light when recordingElectronic moisture sensor alarmMarine grade aluminum housing rated to ��0 FSWApproximate weight: 11 LBS dry/ .5 LBS underwater (weight estimated with camera and battery)Length: 12”Width: 10.5”Height: 6.5”
•••
•••••••••
•
•••
Options
Fully adjustable lights.55X wide angle lensFilters and close up dioptersCarry case
••••
2141253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
VOLUME TANKS, BARE
GallonsDiameter(Inches)
PSIW e i g h t
(LBS)Description Part Number
�0 16 250 111 Tank with Feet �-4�60
60 20 250 16� Tank with Feet �-45�6
GallonsDiameter(Inches)
PSIW e i g h t
(LBS)Description Part Number
20 14 200 61 Tank with Feet A221140��200
�0 16 200 77 Tank with Feet A222160�8200
60 20 200 16� Tank with Feet A22220048200
120 24 200 287 Tank with Feet A22224067200
120 24 200 278 Tank with Saddle A22224067200
200 �0 200 545 Tank with Saddle A22��0072200
240 �0 200 621 Tank with Saddle A22��0084200
400 �6 200 920 Tank with Saddle A22��6094200
GallonsDiameter(Inches)
PSIW e i g h t
(LBS)Description Part Number
�0 16 200 8� Tank with Feet A212160�8200
60 20 200 1�2 Tank with Feet A21220048200
80 24 200 211 Tank with Feet A21224048200
80 20 200 188 Tank with Feet A2122006�200
120 24 200 286 Tank with Base-Ring A21524067200
200 �0 200 517 Tank with Base-Ring A215�0072200
240 �0 200 5�� Tank with Base-Ring A215�0084200
400 �6 200 875 Tank with Base-Ring A215�6094200
Vertical Tanks: 200 PSI
Horizontal Tanks: 200 PSI
Horizontal Tanks: 250 PSI
Air Receivers from 10 gallon to 5,000 gallon capacity are available upon request. Please call for details.
215202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
60 Gallon Tank Specifications30 Gallon Tank Specifications
Model Shown with 2 stage filtration system installed.
Model Shown with 3 stage filtration system installed.
Rental Available!
Our Volume Tanks are ASME constructed 200 PSI rated air receivers. They come standard with heavy duty brass plumbing and your choice of filtration or no filtration. 1/2” check valve on the #10 JIC inlet and 1/2” ball valves with #10 JIC outlets are standard. They also come with a stainless steel pressure gauge and a brass relief valve. On models with 2 stage filtration systems, there is one 5 Micron 1st stage filter and one Charcoal 2nd stage filter.
Volume Tanks, Plumbed
2161253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
WHIPS
LP Deck Whips
HP Deck Whips Synflex brand thermoplastic high pressure hose has long been used as HP deck whips. Synflex 3R80 is a high pressure thermoplastic hose with a polyurethane cover and braided synthetic fibre reinforcement around a nylon core tube. It is available in lengths from 10” to 250’ but greater lengths are available via special order. Hoses are made to order so please call to discuss your options.
HoseI.D.
Pressure Rating
Fittings Available
1/4” 5000 PSI JIC - #4 and #6 Female (Steel and Stainless)
�/8” 4000 PSI JIC - #6 and #8 Female (Steel and Stainless)
1/2” �500 PSI JIC - #8 and #10 Female (Steel and Stainless)
Also available with custom male and female pipe fittings in steel and stainless steel. Please call.
We build our deck whips using Gates ��HB hose for maximum durability. Gates diving hose is designed for handling mixtures of oxygen, helium and nitrogen commonly used in diving applications. It is also built to be kink resistant and will provide extra long wear under normal use. Each whip comes tagged with a serial number and a certification showing that it was pressure tested to 400 PSI. We stock 25’ and 50’ whips in 3/8” and 1/2” I.D. Custom lengths are available. Please call.
HoseI.D.
Pressure Rating
Fittings Available
�/8” 1,125 PSIJIC - #6 Reusable, #6 Barb and NutOxygen - Gates Reusable Fittings, Oxygen Barb and Nut
1/2” 1,000 PSI JIC #10 Reusable
We offer a wide variety of custom high pressure hoses. Please call to discuss your options.
217202 Thru-Way Park Road
Broussard, LA 70518Toll Free: 877-330-8011Phone: (337) 330-8407
Fax: (337) 330-8408
BROUSSARD
WINCH
We’ve mounted the Braden BA3A winch in an all steel, galvanized skid to be ready for use offshore. This winch is a man-rated model that has a line pull rating up to 7,000 LBS*. It includes an oiler and filtration model, along with drip pans, safety guards and hand brake.* please see chart below
Designed in accordance with ANSI/ASME B�0.5 and B�0.75:1 design factor at rated loadEnclosed oil bath “wet” disc brake for outstanding load controlOverrunning clutch to prevent fall-backWinch mounted throttleMarine grade paint
BA2A and BA3A Drum Capacity (10.66”B x 19.00”F x 24.00”W)
D/d 1 2 � 4 5 6 7 8
1/2” 22.5:1 141 294 460 6�9 8�0 10�4 1250 1479*
5/8” 18.2:1 114 240 �79 5�1 695 872
BA5A Drum Capacity (15.00”B x 26.50”F x 20.00”W)
D/d 1 2 � 4 5 6 7
�/4” 21.0:1 109 228 �58 498 649 810 982*
* - Layer does not meet ASME-ANSI B�0.5** - Theoretical
Braden BA�A winchHeavy-duty steel galvanized skid w/drip pansLoad tested pad-eyesFiltration and oiler system1-1/2” Air inlet1-1/2” DischargePersonnel rating in accordance with API 2C90 PSI max operating pressureManual hand brake
Hydraulic Hose ReelsHose, 1” x 3/4”, Twinline, 100’ $�0.00 $150.00
Hose Reel - 300’ $60.00 $�00.00
Hose Reel - 600’ $90.00 $450.00
Hose Reel - 800’ $150.00 $750.00
Hydraulic Power UnitsHydraulic Power Unit 8 - 10 GPM, Diesel Engine
$60.00 $�00.00
Hydraulic Power Unit 14 - 16 GPM, Diesel Engine
$70.00 $�50.00
Hydraulic Power Unit 24 GPM, Diesel Engine
$100.00 $500.00
Hydraulic Power Unit, 20 GPM, Electric Motor, 460v/�Ph
$100.00 $500.00
ADCI & IMCA COMPLIANT
CHAMBER RENTALS AVAILABLE
218
1253 First AvenueHarvey, LA 70058
Toll Free: 800-878-6111Phone: (504) 328-6456
Fax: (504) 328-6458
HARVEY
Ladders12’ Aluminum Ladder $10.00 $50.00
20’ Aluminum Ladder $15.00 $75.00 Pollution Dome3’ x 3’ Dome w/2” Ball Valve and Cam Lock
$40.00 $240.00
Power SheavePower Sheave, 20” w/ Control Valve and Whips
$120.00 $600.00
Equipment Day WeekEquipment Day Week
Lift Bags100 LB - Open Bottom $15.00 $75.00
200 LB - Open Bottom $20.00 $100.00
500 LB - Open Bottom $25.00 $125.00
1000 LB - Open Bottom $�0.00 $150.00
2000 LB - Open Bottom $�5.00 $175.00
5000 LB - Open Bottom $45.00 $225.00
6000 LB - Open Bottom $45.00 $225.00
10,000 LB - Open Bottom $75.00 $�75.00
Ovality Gauges4” Ovality Gauge $�5.00 $175.00
6” Ovality Gauge $40.00 $200.00
8” Ovality Gauge $50.00 $250.00
10” Ovality Gauge $60.00 $�00.00
12” Ovality Gauge $70.00 $�50.00
�0” Ovality Gauge $120.00 $600.00
Metrology TableMetrology Table $125.00 $625.00
Pump, Diaphragm2” Pump $28.00 $112.00
Pump, Diesel2” Pump $�5.00 $140.00
�” Pump $45.00 $180.00
Hydraulic Tools and BitsImpact Wrench - 1” Drive $50.00 $250.00
Impact Wrench - 1 1/2” Drive $70.00 $�50.00
Sockets - 1” Drive - Deep• $2.00 $10.00
Sockets - 1 1/2” Drive - Deep• $2.00 $10.00
Hammer Wrenches• $2.00 $10.00
Chain Saw - 24” Bar $50.00 $250.00
Chipper $50.00 $250.00
Chipper Bits• $2.00 $10.00
Cut Off Saw $50.00 $250.00
Drill $50.00 $250.00
Hammer Drill $60.00 $�00.00
Magnetic Drill $75.00 $�75.00
Grinder $50.00 $250.00
Grinder, Multi-Use (Die) $50.00 $250.00
Reciprocating Saw $70.00 $�50.00
Clamp, Small Pipe (2” - 4”)• $�.00 $15.00
Clamp, Large Pipe (4” - 12”)• $5.00 $25.00
L.A.R.S - Launch and Recovery SystemLaunch And Recovery System
Built to ABS and DNV StandardsADCI and IMCA Compliant4500 LB Safe Working Load20 GPM @ 2000 PSI Hydraulic Power Requirement (MAX.)Includes Clump WeightDOES NOT INCLUDE CABLE
PRODUCT INDEXAdapter 95, 114-116, 167Adapter, BNC to RCA 106Adapter, USB to Ethernet 208Air Analysis Test Kit 5Air Analysis Test Stand 5Air Lift 10Air Storage System, HP 87Alarm, Low Pressure 9Analyzers, Gas 6-9, 205
Bag, Gear 97Bag, Helmet 97Bag, Mesh 97Band, Stainless, Twin 80 1�Barnacle Buster 171Battery, Replacement 188Bell, Open Bottom 14, 15Bell, Saturation Diving 65Belt, Heavy Rubber 96BIBS Manifold 49BIBS Mask, Bell 44BIBS Masks �8-4�Binding Post 100Blade, Cut Off Saw 167Blade, Guillotine Saw 167Blade, Reciprocating Saw 167Blade, Spirakut 168Blade, Trav-L-Cutter 167Blast Pot 19Bolt, Brass, Cable 26Book, Log 96Boots 90, 91Bottle, Applicator 195Bottle Racks 20Bracket, Caisson Gauge 50Bracket, Helmet, Camera and Light 210Bracket, Video Camera & Light 206Brass Snap 95Breaker, Hydraulic 154, 155Buckle, Commercial 96Buckle, Stainless, SCUBA 95Bulb, 150w, Video Light 207Bulb, LED 107Bull Nose Grinder, Hydraulic 155Buoys 21Burning Bars 28Burning Rig, Complete 26
Cable, 6 Pin Y-Splice 209Cable, Communication 14�, 144Cable, Power 14�Cable, USB 2.0 208Cable, Video 14�, 206Cable, Welding 144Cable Ties 107Camera, Underwater 204, 206Canister, Scrubber 55Carabiner 94
Cascade System, Auto 85Case, Pelican �0Chain Saw, Hydraulic 157, 158, 159Chamber, Decompression �4, �5Chamber, Hyperbaric Rescue 67Chaps 90Character Generator 207Chipping Hammer, Hydraulic 156Chisel, Hydraulic Tool Bit 168, 170Clamp, Grounding 26Clamp, Reciprocating Saw 164Clamp, Stainless, SCUBA Bottle 1�Clay Spade, Hydraulic Tool Bit 170Cleaning Products (All) 69Compass, Wrist 97Compressor, Bare 70Compressor, Gas Transfer 59Compressor Packages, HP 78- 84Compressor Packages, LP 71-76Computer Chamber Interface 52Conditioning Unit, Chamber, External (All) 46, 61Conditioning Unit, Chamber, Internal 46, 61Connector, Amphenol, Video Cable 106, 207Connector, Electrical 102-104, 209Connector, Rubber, Test Tube 5Control Module, HRC 68Control Panel, Saturation System 64Cool Shirt 47Cut Off Saw, Hydraulic 157Cygnus Gauge 196Cylinder, SCUBA 1�
Umbilical, Divers 197, 198Umbilical Protection 197Undersuit, Drysuit 9�Undersuit, Hot Water 91
Valve, Ball 200Valve, Check 201Valve, Control, Power Sheave 174Valve, Needle 12, 200Valve, Relief 11, 201Valve, SCUBA Cylinder 1�Video & Data Management System 202Video Camera and Light Controller 20�Video Controller, Camera and Light 20�Video System Console 206Volume Tank, Bare 214Volume Tank, Plumbed 215
Bay-Tech Industries, Inc.Bay-Tech Equipment Rentals, Inc.1253 First AvenueHarvey, LA 70058Toll Free: 1-800-878-6111Phone: (504) 328-6456Fax: (504) 328-6458Email: [email protected]
Bay-Tech Industries, Inc.Bay-Tech Equipment Rentals, Inc.202 Thru-Way Park RoadBroussard, LA 70058Toll Free: 1-877-330-8011Phone: (337) 330-8407Fax: (337) 330-8408Email: [email protected]
Payment Options:
Cash • Money Order • Wire Transfer • Company Check • Visa • Mastercard • American Express
Shipping Options:
U.S. Mail • UPS • Fed Ex • DHL • Motor Freight • Hot Shot
Return Policy:Customers have 30 days from the date on the invoice to return any item. The item(s) must not have any signs of use, wear or tear on them. No item that has been in the
water can be returned unless a manufacturers defect is the cause. Shipping costs will be paid by the customer unless otherwise specified.