Basic Training in Pneumatics/Electropneumatics

Basic Training in Pneumatics/ElectropneumaticsBudget Solution

Festo Didactic

�

Festo Didactic

www.festo-didactic.com

Basic Training in PneumaticsLC 101 equipment set

Pneumatics, Basic levelThe Classic as a Budget Solution

Conveying today what will be stand-ard in the company tomorrow. The workbook contains a series of gradu-ated project exercises based on ac-tual industrial applications, an en-hanced section on fundamentals and a multimedia CD-ROM.

The number of components and the design are specially tailored to the projects contained in the workbook. This means maximum training return for minimum investment. The indus-trial-quality components are not as-sembled and are intended for assem-bly on a perforated panel with an 8 mm grid.

Storage and organisational tools should be ordered separately.

Learning goalsStructure, function and application of single-acting and double-acting cylindersCalculating basic parametersDirect and indirect actuationApplication and function of 3/� and 5/�-way valvesMethods of actuation of directional control valvesAnalysing circuitsOptions for pressure measurementPressure-dependent control sys-temsDistinguishing flow control meth-ods and using them as intendedExplaining and building latching circuitsLogic operations: explaining and implementing AND/OR/NOT op-erationsCombining logic operationsFunction and application of limit switchesTime delay valvesRealising oscillating movementEconomic considerations of using pneumatic components

–

–––

–

–––

–

–

–

––

–––

Close upIn industrial applications, switches and valves should be mounted as close to the actuator as possible to ensure optimum performance. You can now apply the same principle when designing your circuits thanks to the new components.

Time delay valveThe pneumatic time delay valve per-mits precise adjustment and can be read easily from the front – pneumat-ics at their finest!

The best teachware for LC 101

The workbookProvides detailed descriptions of industry-related projects with prob-lem descriptions, parameters and project orders. Worksheets support the students through the required stages of planning, execution and function testing and provide sam-ple solutions. New topics: economic considerations and notes on safe-ty. Includes a multimedia CD-ROM containing photos and videos of in-dustrial applications and circuit dia-grams. Theoretical information is conveyed using animated cutaway models for greater comprehension and worksheets and exercise sheets can be reprinted as necessary.

Optional supplementsDesign and simulation using FluidSIM® (�)Digital learning program, Pneu-matics

–

–

DE 540671

EN (1) 541088

ES 54�503

FR 54�507

3

Festo Didactic

www.festo-didactic.com

Pneumatics LC 101 equipment set (without mounting plate) 54868�

The most important components at a glance:

�x Plastic tubing PUN 4 x 0.75, packaging unit 10 m 151496

1x Plastic tubing PUN 6 x 1, packaging unit 5 m 15�963

10x Push-in T-connector for tubing PUN 4 x 0.75 1531�8

1x On-off valve with filter regulating valve 540691

1x Adjustable pressure regulating valve with pressure gauge 153495

�x 3/�-way valve, actuated by the ring magnet of the cylinder 541189

3x 5/�-way valve, actuated at both ends by pressurizing 541194

1x 5/�-way valve, actuated at one end by pressurizing 541195

1x Quick exhaust valve for direct assembly on the cylinder 541196

1x Timer, � – 30 s, pressure supply port normally blocked 541197

1x Distributor block with hand slide valve 541198

1x Shuttle valve with threaded joint and mounting kit 541199

�x Dual-pressure valve with threaded joint and mounting kit 541�00

�x One-way flow control valve, adjustable 539773

1x 3/�-way valve, actuated by lever with detent 541�0�

�x 3/�-way valve, actuated by pushbutton 541�03

1x Double-acting cylinder with adjustable end-position cushioning 5443�3

�x 3/�-way valve, actuated by roller with spring return 5443�4

1x 3/�-way valve, actuated by pushbutton with spring return 548663

1x 5/�-way valve, actuated by lever with detent 548664

�x Pressure gauge 548665

1x 3/�-way valve, actuated at one end by pressurizing 548666

1x Pressure sequence valve, pressure supply port normally closed 548667

1x Single-acting cylinder 548668

Mounting plate 550 x 700 mm, zinc-coated perforated panel 8 mm grid 541�06

Distance bolt, packaging unit 4 items 110693

Tubing cutter �55851

Compressor, 40 dB (A), maximum 800 kPa (8 bar) and 50 l/min (3) 91030

Case for the mounting plate and the components (4) 30336

Recommended accessories

1 Workbook Pneumatics Basic Level

4 Case for mounting plate and components

� FluidSIM® Pneumatics

3 Compressor

4

Festo Didactic

www.festo-didactic.com

Basic Training in ElectropneumaticsLC 201 equipment set

Electropneumatics, Basic levelThe most important basic principles in one compact and practical book!

The workbook contains a series of graduated project exercises based on actual industrial applications, an enhanced section on fundamentals and a multimedia CD-ROM. The foun-dation for competent training.Place your order now!

The number of components in the equipment set LC �01 is specially tailored to the projects contained in the workbook. This means maximum training return for minimum invest-ment. The industrial-quality compo-nents are not assembled and are in-tended for assembly on a perforated panel with an 8 mm grid.

Storage and organisational tools should be ordered separately.

Learning goalsStructure, function and application of single-acting and double-acting cylindersCalculating basic parametersDirect and indirect actuationApplication and function of 3/� and 5/�-way solenoid valvesAnalysing circuitsOptions for pressure measurementPressure-dependent control sys-temsLatching circuitsLogic operations: AND/OR/NOTCombining logic operationsFunction and application of limit switchesEnd-position monitoring using electronic proximity sensorsTime delay valvesRealising oscillating movementEconomic considerations of using pneumatic componentsTroubleshooting simple electrop-neumatic circuits

–

–––

–––

––––

–

–––

–

Magnetic proximity sensors – compatible and reliableThe proximity sensors are based on the same slot mounting system as the pneumatic proximity sensors in LC 101.

Industrial wiringWire your signal inputs and outputs and the signal processing in line with industry standards using wire end sleeves and cable channels on a ter-minal strip. Use the FluidSIM® P to generate a terminal allocation list and document your circuit profes-sionally.

The convincing teachware for LC 201

The workbook

Optional supplementsDesign and simulation using FluidSIM® (�)Digital learning program, Electro-pneumatics

–

–

DE 540673

EN (1) 541090

ES 54�505

FR 54�509

5

1 Workbook Electropneumatics Basic Level

Festo Didactic

www.festo-didactic.com

Equipment set, Electropneumatics LC �01 (without mounting plate) 548683

The most important components at a glance:

�x Electrical limit switch, actuated by roller with spring return 110669

1x Connecting cable, blue and red with 4 mm connectors 110678

1x Plastic tubing PUN 4 x 0.75, packaging unit 10 m 151496

1x Plastic tubing PUN 6 x 1, packaging unit 5 m 15�963

�0x Push-in T-connector for tubing PUN 4 x 0.75 1531�8

1x On-off valve with filter regulating valve 540691

3x Relay w. 3 changeover switches or 3 norm. closed and 3 norm. open contacts 54115�

�x Electrical pushbutton (normally open and normally closed contacts) 541155

1x Electrical control switch 541156

1x Terminal strip complete with 35 terminals 541158

1x H-rail for relay base and terminal strip 541159

1x Distributor block with hand slide valve 541198

4x One-way flow control valve, adjustable 539773

1x 5/�-way valve, electrically actuated at one end with spring return 541�08

�x Proximity sensor, magnetic (reed) 544�43

�x 5/�-way valve, electrically actuated at both ends 544�44

1x Cable duct set with mounting accessories 544�5�

1x Cable/tube binder set, packaging unit 100 items 544�58

1x Core end sleeve 0.75 mm², packaging unit 100 items 544�59

1x Plastic conductor blue 0.75 mm², packaging unit 100 m 544�60

1x Electromechanical pressure switch 1.5 – 8 bar (changeover switch) 544�91

�x Double-acting cylinder with adjustable end-position cushioning 5443�3

1x Single-acting cylinder 548668

1x 3/�-way valve, pressure supply port normally closed 548669

1x Proximity sensor, optical (changeover switch) 548670

Mounting plate 550 x 700 mm, zinc-coated perforated panel 8 mm grid 541�06

Distance bolt, packaging unit 4 items 110693

Tubing cutter �55851

Compressor, 40 dB (A), maximum 800 kPa (8 bar) and 50 l/min 91030

Power pack �4 V DC/4.5 A for 115/�30 V AC (47 – 63 Hz), without cable (3) 16�416

Case for the mounting plate and the components (4) 30336

Recommended accessories

Supplementary equipment set LC 101 – LC �01 548684

The most important components at a glance:

Supplement to a Pneumatics LC 101 equipment set, making it a complete Electropneumatics LC 201 equipment set

�x Electrical limit switch, actuated by roller with spring return 110669

1x Connecting cable, blue and red with 4 mm connectors 110678

3x Relay w. 3 changeover switches or 3 norm. closed and 3 norm. open contacts 54115�

�x Electrical pushbutton (normally open and normally closed contacts) 541155

1x Electrical control switch 541156

1x Terminal strip complete with 35 terminals 541158

1x H-rail for relay base and terminal strip 541159

1x 5/�-way valve, electrically actuated at one end with spring return 541�08

�x Proximity sensor, magnetic (reed) 544�43

�x 5/�-way valve, electrically actuated at both ends 544�44

1x Cable duct set with mounting accessories 544�5�

1x Cable/tube binder set, packaging unit 100 items 544�58

1x Core end sleeve 0.75 mm², packaging unit 100 items 544�59

1x Plastic conductor blue 0.75 mm², packaging unit 100 m 544�60

1x Electromechanical pressure switch 1.5 – 8 bar (changeover switch) 544�91

1x 3/�-way valve, pressure supply port normally closed 548669

1x Proximity sensor, optical (changeover switch) 548670

1x Double-acting cylinder with adjustable end-position cushioning 5443�3

�x One-way flow control valve, adjustable 539773

3 Power pack

� FluidSIM® Pneumatics

4 Case for mounting plate and components

Festo worldwide

ArgentinaFesto S.A.Edison �39�(B1640 HRV) MartinezProv. de Buenos AiresTel. ++54 (0)11/47 17 8� 00, Fax 47 17 8� 8�E-mail: [email protected]

AustraliaFesto Pty. Ltd.Head Office (Melbourne)179-187 Browns Road, P.O. Box �61Noble Park Vic. 3174Call Toll Free 1300 88 96 96Fax Toll Free 1300 88 95 95Tel. ++ 61(0)3/97 95 95 55, Fax 97 95 97 87E-mail: [email protected]

AustriaFesto Gesellschaft m.b.H.Linzer Straße ��71140 WienTel. ++43 (0)1/91 07 50, Fax 91 07 5� 50E-mail: [email protected]

BelarusIP FestoMinsk, ��0035Mascherov Prospekt, 78, BelarusTel. ++375 (0)17/�04 85 58, Fax �04 85 59E-mail: [email protected]

BelgiumFesto Belgium sa/nvRue Colonel Bourg 1011030 Bruxelles/BrusselTel. ++3� (0)�/70� 3� 11, Fax 7�6 90 11E-mail: [email protected]

BrazilFesto Automaçao Ltda.Rua Guiseppe Crespi, 76KM 1�,5 - Via Anchieta04183-080 Sao Paulo SP-BrazílTel. ++55 (0)11/50 13 16 00, Fax 50 13 18 68E-mail: [email protected]

BulgariaFesto Bulgaria EOOD159� Sofia9, Christophor Kolumb Blvd.Tel. ++359 (0)�/960 07 1�, Fax 960 07 13E-mail: [email protected]

CanadaFesto Inc.5300 Explorer DriveMississauga, Ontario L4W 5G4Tel. ++1 (0)905/6�4 90 00, Fax 6�4 90 01E-mail: [email protected]

ChileFesto S.A.Mapocho 19016500151 Santiago de ChileTel. ++56 (0)�/690 �8 00, Fax 695 75 90E-mail: [email protected]

ChinaFesto (China) Ltd.1156 Yunqiao RoadJinqiao Export Processing Zone, Pudong,�01�06 Shanghai, PRCTel. ++86 (0)�1/58 54 90 01, Fax 58 54 03 00E-mail: [email protected]

ColombiaFesto Ltda.Avenida El Dorado No. 98-43BogotáTel. ++57 (0)1/404 80 88, Fax 404 81 01E-mail: [email protected]

CroatiaFesto d.o.o.Nova Cesta 18110000 ZagrebTel. ++385 (0)1/619 19 69, Fax 619 18 18E-mail: [email protected]

Czech RepublicFesto, s.r.o.Modranska 543/76147 00 Praha 4Tel. ++4�0 �61 09 96 11, Fax ++4�0 �41 77 33 84E-mail: [email protected]

DenmarkFesto A/SIslevdalvej 180�610 RødovreTel. ++45 70 �1 10 90, Fax ++45 44 88 81 10E-mail: [email protected]

EstoniaFesto OY AB Eesti FiliaalLaki 11B1�915 TallinnTel. ++37� 666 15 60, Fax ++37� 666 15 61E-mail: [email protected]

FinlandFesto OYMäkituvantie 9, P.O. Box 8601511 VantaaTel. ++358 (09)/87 06 51, Fax 87 06 5� 00E-mail: [email protected]

FranceFesto E.U.R.L.Head OfficeNuméro Indigo Tel. 08�0/�04640, Fax �04641BP �58,rue du clos Sainte-Catherine94363 Bry-Sur-Marne CedexTel. ++33 (0)1/48 8� 64 00, Fax 48 8� 64 01E-mail: [email protected]

GermanyFesto Didactic GmbH & Co. KGPostfach 10 07 1073707 EsslingenRechbergstraße 373770 Denkendorfwww.festo-didactic.deTel. 08 00/5 60 09 67, Fax 08 00/5 60 08 43E-mail: [email protected]

GreeceFesto Ltd.40 Hamosternas Ave.11853 AthensTel. ++30 �10/341 �9 00, Fax 341 �9 05E-mail: [email protected]

Hong KongFesto Ltd.Unit C&D, 7/F, Leroy Plaza15 Cheung Shun StreetCheung Sha Wan, KowloonHong KongTel. ++ 85�/�7 43 83 79, Fax �7 86 �1 73E-mail: [email protected]

HungaryFesto Kft.Csillaghegyi út 3�-34.1037 BudapestTel. ++36 (06)1/�50 00 55, Fax �50 15 93E-mail: [email protected]

IndiaFesto Controls Private Ltd.�37B,Bommasandra Industrial Area,Bangalore Hosur Highway,Bangalore 560 099Tel. ++91 (0)80/�� 89 41 00, Fax 783 �0 58E-mail: [email protected]

IndonesiaPT. FestoJL. Sultan Iskandar Muda No.68Arteri Pondok IndahJakarta 1��40Tel. ++6� (0)�1/�7 50 79 00, Fax �7 50 79 98E-mail: [email protected]

IranFesto Pneumatic S.K.#1,Behbahan St. Ramsar aveTehran 1581975411Tel. ++98 (0)�1/88 8� 9� �5, Fax 88� �1 6�E-mail: [email protected]

IrelandFesto LimitedUnit 5 Sandyford ParkSandyford Industrial EstateDublin 18Tel. ++ 353(0)1/�95 49 55, Fax �95 56 80E-mail: [email protected]

IsraelFesto Pneumatic Israel Ltd.P.O. Box 1076, Ha‘atzma‘ut Road 48Yehud 56100Tel. ++97� (0)3/63� �� 66, Fax 63� �� 77E-mail: [email protected]

ItalyFesto S.p.AVia Enrico Fermi 36/38�0090 Assago (MI)Tel. ++39 0�/45 78 81, Fax 488 06 �0E-mail: [email protected]

JapanFesto K.K.1-�6-10 Hayabuchi, Tsuzuki-kuYokohama ��4-00�5Tel. ++81 (0)45/593 56 10, Fax 593 56 78E-mail: [email protected]

Korea SouthFesto Korea Co., Ltd.470-1 Gasan-dong, Geumcheon-guSeoul #153-803Tel. ++8� (0)�/850 71 14, Fax 864 70 40E-mail: [email protected]

LatviaFesto SIADeglava iela 601035 RigaTel. ++371 (0)7/57 78 64, Fax 57 79 46E-mail: [email protected]

LithuaniaFesto UABKaraliaus Mindaugo pr. ��3000 KaunasTel. ++370 (8)7/3� 13 14, Fax 3� 13 15E-mail: [email protected]

MalaysiaFesto Sdn.Berhad10 Persiaran IndustriBandar Sri Damansara, Wilayah Persekutuan5��00 Kuala LumpurTel. ++60 (0)3/6� 86 80 00, Fax 6� 75 64 11E-mail: [email protected]

MexicoFesto Pneumatic, S.A.Av. Ceylán 3, Col. Tequesquinahuac540�0 Tlalnepantla, Edo. de MéxicoTel. ++5� (01)55/53 �1 66 00, Fax 53 �1 66 65E-mail: [email protected]

NetherlandsFesto B.V.Schieweg 6��6�7 AN DelftTel. ++31 (0)15/�51 88 99, Fax �61 10 �0E-mail: [email protected]

New ZealandFesto LimitedMT. WellingtonAuckland NZTel. ++64 (0)9/574 10 94, Fax 574 10 99E-mail: [email protected]

NorwayFesto ABOstensjoveien �70661 OsloTel. ++47 �� 7� 89 50, Fax ++47 �� 7� 89 51E-mail: [email protected]

PeruFesto S.R.L.Calle Amador Merino Reyna #480, San IsidroLima, PerúTel. ++51 (0)1/��� 15 84, Fax ��� 15 95

PhilippinesFesto Inc.KM 18, West Service Road, South Superhighway1700 Paranaque City, Metro ManilaTel. ++63 (0)�/776 68 88, Fax 8�3 4� 19E-mail: [email protected]

PolandFesto Sp. z o.o.Janki k/Warszawy, ul. Mszczonowska 705090 RaszynTel. ++48 (0)��/711 41 00, Fax 711 41 0�E-mail: [email protected]

RomaniaFesto S.R.L.St. Constantin 17010�17 BucurestiTel. ++40 (0)�1/310 �9 83, Fax 310 �4 09E-mail: [email protected]

RussiaFesto-RF OOOMichurinskiy prosp., 49119607 MoskowTel. ++7 495/737 34 00, Fax 737 34 01E-mail: [email protected]

SingaporeFesto Pte. Ltd.6 Kian Teck WaySingapore 6�8754Tel. ++65 6� 64 01 5�, Fax ++65 6� 61 10 �6E-mail: [email protected]

SlovakiaFesto spol. s r.o.Gavlovicová ul. 183103 Bratislava 3Tel. ++4�1 (0)�/49 10 49 10, Fax 49 10 49 11E-mail: [email protected]

SloveniaFesto d.o.o. LjubljanaIC Trzin, Blatnica 81�36 TrzinTel. ++386 (0)1/530 �1 00, Fax 530 �1 �5E-mail: [email protected]

South AfricaFesto (Pty) Ltd.��-�6 Electron Avenue, Isando, P.O. Box �55Isando 1600Tel. ++�7 (0)11/971 55 00, Fax 974 �1 57E-mail: [email protected]

SpainFesto Pneumatic, S.A.U.Tel.: 901�43660 Fax: 90��43660Avenida Granvia, 159Distrito económico Granvia L‘HES-08908 Hospitalet de Llobregat, BarcelonaTel. ++ 3493/�61 64 00, Fax �61 64 �0E-mail: [email protected]

SwedenFesto ABStillmansgatan 1, P.O. Box �1038�00�1 MalmöTel. ++46 (0)40/38 38 40, Fax 38 38 10E-mail: [email protected]

SwitzerlandFesto AGMoosmattstrasse �48953 Dietikon ZHTel. ++41 (0)44/744 55 44, Fax 744 55 00E-mail: [email protected]

TaiwanFesto Co., Ltd.9 Kung 8th RoadLinkou �nd Industrial Zone, Linkou #�44Taipei Hsien TaiwanTel. ++886 (0)�/�6 01 9� 81, Fax �6 01 9� 87E-mail: [email protected]

ThailandFesto Ltd.67/1 Moo 6 Phaholyothin RoadKlong 1, Klong Luang,Pathumthani 1�1�0Tel. ++66 �9 01 88 00, Fax ++66 �9 01 88 33E-mail: [email protected]

TurkeyFesto San. ve Tic. A.S.Tuzla Mermerciler OrganizeSanayi Bölgesi 6/1834956 Tuzla - Istanbul/TRTel. ++90 (0)�16/585 00 85, Fax 585 00 50E-mail: [email protected]

UkraineFesto UkrainaBorisoglebskaja 11Kiev 04070Tel. ++380 (0)44/�39 �4 33, Fax 463 70 96E-mail: [email protected]

United KingdomFesto LimitedApplied Automation Centre, Caswell RoadBrackmills Trading EstateNorthampton NN4 7PYTel. ++44 (0)1604/66 70 00, Fax 66 70 01E-mail: [email protected]

United StatesFesto Corporation395 Moreland RoadHauppauge, NY 11788Tel. ++1 (0) 631-404-318�Fax ++1 (0) 631-435-3847

VenezuelaFesto C.A.Av. �3, Esquina calle 71, No. ��-6�Maracaibo, Edo. ZuliaTel. ++58 (0)�61/759 09 44, Fax 759 04 55E-mail: [email protected]