Automation Interface Module (AIM) Worksheet Communications Interface Module (CIM) Worksheet Directions: Fill in section 1: Document the desired status and control points for each lighting panel. Please indicate the # of relays in each panel and whether you would like to just check status or if you would also like to issue commands. If the panels have the same command and status requirements, you may submit one sheet that has all applicable panels listed in the space provided at the bottom of this section. Fill in section 2 on one sheet only. Section I Relay Outputs Local Contact Inputs Relay Check Relay Status Issue Relay Commands If you wish to issue commands to this relay as part of a command group, please indicate group # that this relay belongs to. Notes Input Check Input Status Notes 01 01 02 02 03 03 04 04 05 05 06 06 07 07 08 08 09 09 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 23 23 24 24 25 25 26 26 27 27 28 28 29 29 30 30 31 31 32 32 33 34 35 Analog Input Check Input On/Off Status Check Analog Reading 36 37 38 01 39 02 40 03 41 04 42 43 44 45 46 47 48
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 5
Automation Interface Module (AIM) Worksheet
Communications Interface Module (CIM) Worksheet
Directions: Fill in section 1: Document the desired status and control points for each lighting panel. Please indicate the # of relays in each panel and
whether you would like to just check status or if you would also like to issue commands. If the panels have the same command and status requirements,
you may submit one sheet that has all applicable panels listed in the space provided at the bottom of this section. Fill in section 2 on one sheet only.
Section I Relay Outputs Local Contact Inputs
Relay
Check Relay Status
Issue Relay Commands
If you wish to issue commands to this relay as part of a command group, please indicate group #
that this relay belongs to. Notes Input
Check Input
Status Notes
01 01
02 02
03 03
04 04
05 05
06 06
07 07
08 08
09 09
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33
34
35
Analog Input
Check Input
On/Off Status Check Analog Reading
36
37
38 01 39 02 40 03 41 04 42
43
44
45
46
47
48
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Text Box
Occ Sensor
C5938
Text Box
Occ Sensor
C5938
Text Box
Photocell
C5938
Text Box
C5938
Text Box
C5938
Text Box
C5938
Snapshot
C5938
Text Box
C5938
Text Box
Section II Setup Information (Fill in on one sheet only and choose only one protocol)
What Protocol will you be using? (circle one) BACnet Modbus LON N2
BACnet
I will be using BACnet over IP I will be using BACnet over Ethernet (Please provide the following information for proper (Please provide the following information for proper configuration) configuration. Please note – the MAC address
information of the unit will be provided on the final
IP Address mapping table once the unit is configured)
Subnet Mask BACnet Network Number
Default Gateway IP Address Desired BACnet Device Object Instance ID#
Desired BACnet Device Object Instance ID#
I will be using BACnet over ARC156 I will be using BACnet over MS/TP (Please provide the following information for proper (Please provide the following information for proper configuration) configuration)