M320 Multiservice Edge Router InterfaceModule ReferenceMay
2013This guide provides an overviewand description of the PICs
supported by the JuniperNetworks M320 Multiservice Edge
Router.ContentsM320PICDescription. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3High
Availability Features . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 4M320PICsSupported. .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 5M320FPCsSupported. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14M320 PIC Combination Limitations . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 15M320 PIC/FPC
Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 15PIC/FPC Compatibility (Type 1 FPCs
and Type 1 PICs) . . . . . . . . . . . . . . . . . . 16PIC/FPC
Compatibility (Type 2 FPCs and Type 2 PICs) . . . . . . . . . . . .
. . . . . . 19PIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs) .
. . . . . . . . . . . . . . . . . 21ATM2DS3IQPIC(M320Router). . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23ATM2 E3 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 25ATM2 OC3/STM1 IQ PIC
(M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 27ATM2 OC12/STM4 IQ PICs (M320 Router) . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 30ATM2 OC48/STM16
IQPIC with SFP (M320 Router) . . . . . . . . . . . . . . . . . . .
. . . . 33Channelized DS3 IQ PIC (M320 Router) . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 36Channelized DS3/E3
Enhanced IQ (IQE) PIC (M320 Router) . . . . . . . . . . . . . . . .
38Channelized E1 IQPIC (M320 Router) . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 42Channelized OC3/STM1
Circuit Emulation PIC with SFP (M320 Router) . . . . . . .
44Channelized E1/T1 Enhanced IQ (IQE) PIC (M320 Router) . . . . . .
. . . . . . . . . . . . 47ChannelizedOC3IQPIC(M320Router). . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 50Channelized
OC3/STM1 Enhanced IQ (IQE) PIC with SFP (M320 Router) . . . . . .
53Channelized OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router)
. . . . . 58Channelized OC48/STM16 Enhanced IQ (IQE) PIC with SFP
(M320 Router) . . . 63Channelized STM1 IQPIC (M320 Router) . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
68Channelized T1 IQPIC (M320 Router) . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . 70DS3/E3 Enhanced IQ (IQE)
PIC (M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . .
. . 73E1 PICs (M320 Router) . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
76E1/T1CircuitEmulationPIC(M320Router). . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 78E3PIC(M320Router). . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 82E3 IQ PIC (M320 Router) . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 841
Copyright 2013, Juniper Networks, Inc.EIA-530PIC(M320Router). . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 86Fast Ethernet PICs (M320 Router) . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 89Gigabit
Ethernet PICs with SFP (M320 Router) . . . . . . . . . . . . . . .
. . . . . . . . . . . . 92Gigabit Ethernet IQPICs with SFP (M320
Router) . . . . . . . . . . . . . . . . . . . . . . . . . 95Gigabit
Ethernet IQ2 PICs with SFP (M320 Router) . . . . . . . . . . . . .
. . . . . . . . . . . 97Gigabit Ethernet Enhanced IQ2 (IQ2E) PICs
with SFP (M320 Router) . . . . . . . . . 10110-Gigabit Ethernet IQ2
PIC with XFP (M320 Router) . . . . . . . . . . . . . . . . . . . .
. 10510-Gigabit Ethernet Enhanced IQ2 (IQ2E) PIC with XFP (M320
Router) . . . . . . 10810-Gigabit Ethernet PIC with XENPAK (M320
Router) . . . . . . . . . . . . . . . . . . . . . . 11110-Gigabit
Ethernet DWDMPIC (M320 Router) . . . . . . . . . . . . . . . . . .
. . . . . . . . . 113MultiservicesPICs(M320Router). . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
115SONET/SDH OC3/STM1 Enhanced IQ (IQE) PIC with SFP (M320 Router)
. . . . . 118SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP (M320
Router) . . . . . . . . . . 121SONET/SDH OC12/STM4 Enhanced IQ(IQE)
PIC with SFP (M320 Router) . . . . 124SONET/SDH OC12/STM4
(Multi-Rate) PICs with SFP (M320 Router) . . . . . . . .
127SONET/SDH OC48c/STM16 PICs with SFP (M320 Router) . . . . . . .
. . . . . . . . . 130SONET/SDH OC48/STM16 Enhanced IQ (IQE) PIC
with SFP (M320 Router) . . 133SONET/SDH OC48/STM16 (Multi-Rate) PIC
with SFP (M320 Router) . . . . . . . 138SONET/SDH OC192c/STM64 PIC
(M320 Router) . . . . . . . . . . . . . . . . . . . . . . . . .
141SONET/SDH OC192/STM64 PIC with XFP (M320 Router) . . . . . . . .
. . . . . . . . . 144T1 PIC (M320 Router) . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
147TunnelServicesPIC(M320Router). . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 149Junos OS Documentation and
Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 150RequestingTechnical Support. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
151Self-HelpOnlineToolsandResources. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 151Opening a Case with JTAC . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
151Revision History . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
152Copyright 2013, Juniper Networks, Inc. 2M320 Multiservice Edge
Router Interface Module ReferenceM320PIC DescriptionPICs provide
the physical connection to various network media types, receiving
incomingpackets fromthe network and transmitting outgoing packets
to the network. During thisprocess, each PIC performs framing and
line-speed signaling for its media type. Beforetransmitting
outgoing data packets, the PICs encapsulate the packets received
fromtheFPCs. Each PIC is equipped with an ASIC that performs
control functions specific to themedia type of that PIC.PICs are
hot-removable and hot-insertable. You can install up to four PICs
in the slotsof each Type 1 and Type 2 FPC, and up to two PICs in
the slots of each Type 3 FPC. Type1 and Type 2 PICs have captive
screws at their upper and lower corners. Type 3 PICs havean upper
ejector handle and a lower captive screw.Therouter
supportsvariousPICs, includingATM, Channelized, Gigabit Ethernet,
IPServices,and SONET/SDH interfaces. Blank PICs resemble other PICs
but do not provide anyphysical connection or activity. When a slot
is not occupied by a PIC, you must insert ablank PIC to fill the
empty slot and ensure proper cooling of the
system.RelatedDocumentationM320 PICs Supported on page 5 M320
End-of-Life PICs Supported Maintaining M320 PICs and PIC Cables
Replacing an M320 PIC Troubleshooting the M320 PICs3 Copyright
2013, Juniper Networks, Inc.M320 PIC DescriptionHigh Availability
FeaturesHigh availability features include Routing Engine
redundancy, graceful Routing Engineswitchover (GRES), nonstop
bridging, nonstop active routing, graceful restart for
routingprotocols, Virtual Router Redundancy Protocol (VRRP), and
unified in-service softwareupgrade (ISSU). Some high availability
features are not supported by all platforms andall PICs. For
information about the first supported Junos OS Release for these
featuresby PIC and platform, see the Junos OS High Availability
Library for Routing Devices.RelatedDocumentationM320 PIC
Description on page 3 M320 PIC Combination Limitations on page 15
M320 PICs Supported on page 5 M320 FPCs Supported on page 14 M320
PIC/FPC Compatibility on page 15Copyright 2013, Juniper Networks,
Inc. 4M320 Multiservice Edge Router Interface Module
ReferenceM320PICs SupportedThe following tables list the PICs
supported by the M320 router. The PICs are listedalphabetically by
PIC family. Table 1 on page 5 lists the ATM2 IQPICs. Table 2 on
page 6 lists the Channelized IQPICs. Table 3 on page 6 lists the
Channelized IQE PICs. Table 4 on page 7 lists the Circuit Emulation
PICs. Table 5 on page 7 lists the DS3, E1, E3, and T1 PICs. Table 6
on page 8 lists the EIA-530 PIC. Table 7 on page 8 lists the Fast
Ethernet PICs. Table 8 on page 9 lists the Gigabit Ethernet PICs.
Table 9 on page 11 lists the 10-Gigabit Ethernet PICs. Table 10 on
page 11 lists the Services PICs. Table 11 on page 12 lists the
SONET/SDH PICs.Table 1: ATM2 IQPICs Supported by the
M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports
PIC Family and Type6.4 Coaxial: 10 ft (3.05 m) posilock SMBto BNC
(provided) Four pairs of Rx and Txcoaxial cablesPB-4DS3-ATM2 4 ATM2
DS3 IQPIC (M320Router) on page 236.3 Coaxial: 10 ft (3.05 m)
posilock SMBto BNC cable (provided) Four pairs of Rx and Txcoaxial
cablesPB-4E3-ATM2 4 ATM2 E3 IQPIC (M320Router) on page 256.2
Optical: SC/PC PB-2OC3-ATM2-MMPB-2OC3-ATM2-SMIR2 ATM2 OC3/STM1
IQPIC(M320 Router) on page 27ATM2 OC12/STM4 IQPICs (M320 Router) on
page 306.2 Optical: SC/PC PB-1OC12-ATM2-MMPB-1OC12-ATM2-SMIR1 ATM2
OC12/STM4 IQPIC6.2 Optical: SC/PC
PB-2OC12-ATM2-MMPB-2OC12-ATM2-SMIR2 ATM2 OC12/STM4 IQPIC5 Copyright
2013, Juniper Networks, Inc.M320 PICs SupportedTable 1: ATM2 IQPICs
Supported by the M320Router (continued)First Junos OSReleaseSupport
Connector Model Number Ports PIC Family and Type7.3 Optical: LC/PC
PB-1OC48-ATM2-SFP 1 ATM2 OC48/STM16 IQPICwith SFP (M320 Router)
onpage 33Table 2: Channelized IQPICs Supported by the
M320RouterFirst Junos OSReleaseSupport Connector Model Number Ports
PIC Family and Type6.2 Coaxial Standard DS3 BNC coaxialcable
interfacesPB-4CHDS3-QPP 4 Channelized DS3 IQPIC(M320 Router) on
page 369.1R49.2R39.3R1 120-ohmRJ-48C PB-10CHE1-RJ48-QPP-N 10
Channelized E1 IQPIC (M320Router) on page 427.1 Optical: SC/PC
PB-1CHOC3-SMIR-QPP 1 Channelized OC3 IQPIC(M320 Router) on page
506.2 Optical: SC/PC PB-1CHSTM1-SMIR-QPP 1 Channelized STM1
IQPIC(M320 Router) on page 687.4 120-ohmRJ-48C
connector(female)PB-10CHT1-RJ48-QPP 10 Channelized T1 IQPIC
(M320Router) on page 70Table 3: Channelized IQE PICs Supported by
the M320RouterFirst Junos OSReleaseSupport Connector Model Number
Ports PIC Family and Type9.3 Coaxial Standard DS3 BNC coaxialcable
interfacesPB-4CHDS3-E3-IQE-BNC 4 Channelized DS3/E3Enhanced IQ(IQE)
PIC (M320Router) on page 389.5 120-ohmRJ-48C
connector(female)PB-10CHE1-T1-IQE-RJ48 10 Channelized E1/T1
EnhancedIQ(IQE) PIC (M320 Router)on page 479.3 Optical: LC/PC
PB-2CHOC3-STM1-IQE-SFP 2 Channelized OC3/STM1Enhanced IQ(IQE) PIC
withSFP (M320 Router) onpage 53Channelized OC12/STM4 Enhanced
IQ(IQE) PIC with SFP (M320 Router) on page 58Copyright 2013,
Juniper Networks, Inc. 6M320 Multiservice Edge Router Interface
Module ReferenceTable 3: Channelized IQE PICs Supported by the
M320Router (continued)First Junos OSReleaseSupport Connector Model
Number Ports PIC Family and Type9.3 Optical: LC/PC
PB-1CHOC12-STM4-IQE-SFP 1 Channelized OC12/STM4Enhanced IQ(IQE) PIC
withSFP9.4 Optical: LC/PC PB-4CHOC12-STM4-IQE-SFP 4 Channelized
OC12/STM4Enhanced IQ(IQE) PIC withSFP9.4 Optical: LC/PC
PB-1CHOC48-STM16-IQE-SFP 1 Channelized OC48/STM16Enhanced IQ(IQE)
PIC withSFP (M320 Router) onpage 63Table 4: Circuit Emulation PICs
Supported by the M320RouterFirst Junos OSReleaseSupport Connector
Model Number Ports PIC Family and Type9.4 Optical: LC/PC
PB-4CHOC3-CE-SFP 4 Channelized OC3/STM1Circuit
EmulationPICwithSFP(M320 Router) on page 449.4 RJ-21 connector
Cables are rated forintra-building
connectionsonly.PB-12T1E1-CE-TELCO 12 E1/T1 Circuit Emulation
PIC(M320 Router) on page 78Table 5: DS3, E1, E3, and T1 PICs
Supported by the M320RouterFirst Junos OSReleaseSupport Connector
Model Number Ports PIC Family and Type9.3R2 Coaxial Standard DS3
BNC coaxialcable interfacesPB-4DS3-E3-IQE-BNC 4 DS3/E3 Enhanced
IQ(IQE)PIC(M320Router) onpage736.4 Four RJ-48 connectors (oneper
port) Four coaxial connectorsCustom10-ft (3.05-m)posilock to BNC
male cable,separate Rx and TxPB-4E1-COAXPB-4E1-RJ484 E1 PICs (M320
Router) onpage 766.3 Custom10 ft (3.05 m)posilock to BNC male
cable,separate RX and TXPB-4E3-QPP 4 E3 PIC (M320 Router) onpage
827 Copyright 2013, Juniper Networks, Inc.M320 PICs SupportedTable
5: DS3, E1, E3, and T1 PICs Supported by the M320Router
(continued)First Junos OSReleaseSupport Connector Model Number
Ports PIC Family and Type6.2 Coaxial Standard DS3 BNC coaxialcable
interfacesPB-4E3-QPP 4 E3 IQPIC (M320 Router) onpage 846.4
100-ohmRJ-48 connector PB-4T1-RJ48 4 T1 PIC (M320 Router) onpage
147Table 6: EIA-530PIC Supported by the M320RouterFirst Junos
OSReleaseSupport Connector Model Number Ports PIC Family and
Type6.2 Two DB-25 male connectors(one per port, included withPIC)
V.35 requires an EIA-530 toV.35 cable and connects toa V.35 DTE
34-pinWinchester type male cable(one per port) X.21 requires an
EIA-530 toX.21 cable and connects to aX.21 DTE DB-15 male
cablePB-2EIA530 2 EIA-530 PIC (M320 Router)on page 86Table 7: Fast
Ethernet PICs Supported by the M320RouterFirst Junos
OSReleaseSupport Connector Model Number Ports PIC Family and
TypeFast Ethernet PICs (M320 Router) on page 896.2 RJ-45 Two-pair,
Category 5unshielded twisted-pair Pinout: MDI noncrossoverPB-4FE-TX
4 Fast Ethernet PIC6.3 MT-RJ female PB-8FE-FX 8 Fast Ethernet
PIC6.2 One very high densityconnector interface(VHDCI)to RJ-21
cable that connectsto an RJ-45 patch
panelPB-12FE-TX-MDIPB-12FE-TX-MDIX12 Fast Ethernet PICCopyright
2013, Juniper Networks, Inc. 8M320 Multiservice Edge Router
Interface Module ReferenceTable 7: Fast Ethernet PICs Supported by
the M320Router (continued)First Junos OSReleaseSupport Connector
Model Number Ports PIC Family and Type6.4 Four VHDCI
connectorsVHDCI-to-RJ-21 cables thatconnect to an RJ-45
patchpanelPB-48FE-TX 48 Fast Ethernet PICTable 8: Gigabit Ethernet
PICs Supported by the M320RouterFirst Junos OSReleaseSupport
Connector Model Number Ports PIC Family and TypeGigabit
EthernetGigabit Ethernet PICs with SFP (M320 Router) on page 926.4
Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivity Pinout: MDI crossoverPB-1GE-SFP 1 Gigabit
Ethernet PIC withSFP6.4 Optical: LC/PC Copper: RJ-45 Four-pair,
Category 5shielded twisted-pairconnectivityPB-2GE-SFP 2 Gigabit
Ethernet PIC withSFP7.0 Optical: LC/PC Copper: RJ-45 Four-pair,
Category 5shielded twisted-pairconnectivityPB-4GE-SFP 4 Gigabit
Ethernet PIC withSFP6.2 Optical: LC/PC Copper: RJ-45 Four-pair,
Category 5shielded twisted-pairconnectivityPC-10GE-SFP 10 Gigabit
Ethernet PIC withSFPGigabit Ethernet IQGigabit Ethernet IQPICs with
SFP (M320 Router) on page 959 Copyright 2013, Juniper Networks,
Inc.M320 PICs SupportedTable 8: Gigabit Ethernet PICs Supported by
the M320Router (continued)First Junos OSReleaseSupport Connector
Model Number Ports PIC Family and Type6.2 Optical: LC/PC Copper:
RJ-45 Four-pair, Category 5shielded twisted-pairconnectivity
Pinout: MDI crossoverPB-1GE-SFP-QPP 1 Gigabit Ethernet IQPICwith
SFP6.2 Optical: LC/PC Copper: RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivity Pinout: MDI crossoverPB-2GE-SFP-QPP 2
Gigabit Ethernet IQPICwith SFPGigabit Ethernet IQ2Gigabit Ethernet
IQ2 PICs with SFP (M320 Router) on page 977.6R3 Optical: LC/PC
Copper: RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivityPB-4GE-TYPE1-SFP-IQ2 4 Gigabit Ethernet IQ2
PICwith SFP7.6R2 Optical: LC/PC Copper: RJ-45 Four-pair, Category
5shielded twisted-pairconnectivityPB-8GE-TYPE2-SFP-IQ2 8 Gigabit
Ethernet IQ2 PICwith SFP8.2 Optical: LC/PC Copper: RJ-45 Four-pair,
Category 5shielded twisted-pairconnectivityPC-8GE-TYPE3-SFP-IQ2 8
Gigabit Ethernet IQ2 PICwith SFPGigabit Ethernet IQ2EGigabit
Ethernet Enhanced IQ2 (IQ2E) PICs with SFP (M320 Router) on page
101Copyright 2013, Juniper Networks, Inc. 10M320 Multiservice Edge
Router Interface Module ReferenceTable 8: Gigabit Ethernet PICs
Supported by the M320Router (continued)First Junos OSReleaseSupport
Connector Model Number Ports PIC Family and Type9.4 Optical: LC/PC
Copper: RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivityPB-4GE-TYPE1-SFP-IQ2E 4 Type 1 Gigabit
EthernetEnhanced IQ2 (IQ2E) PICwith SFP9.4 Optical: LC/PC Copper:
RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivityPB-8GE-TYPE2-SFP-IQ2E 8 Type 2 Gigabit
EthernetEnhanced IQ2 (IQ2E) PICwith SFP9.4 Optical: LC/PC Copper:
RJ-45 Four-pair, Category 5shielded
twisted-pairconnectivityPC-8GE-TYPE3-SFP-IQ2E 8 Type 3 Gigabit
EthernetEnhanced IQ2 (IQ2E) PICwith SFPTable 9: 10-Gigabit Ethernet
PICs Supported by the M320RouterFirst Junos OSReleaseSupport
Connector Model Number Ports PIC Family and Type6.2 XENPAK
PC-1XGE-XENPAK 1 10-Gigabit Ethernet PICwithXENPAK (M320 Router)
onpage 1117.5 Optical: SC/PC PC-1XGE-DWDM-CBAND 1 10-Gigabit
Ethernet DWDMPIC (M320 Router) onpage 1138.0R3 Optical: LC/PC
PC-1XGE-TYPE3XFP-IQ2 1 10-Gigabit Ethernet IQ2 PICwith XFP (M320
Router) onpage 1059.4 Optical: LC/PC PC-1XGE-TYPE3XFP-IQ2E 1
10-Gigabit EthernetEnhanced IQ2 (IQ2E) PICwith XFP (M320 Router)
onpage 108Table 10: Service PICs Supported by the M320RouterFirst
Junos OSRelease Support Connector Model Number Ports PIC Family and
TypeMultiservices PICs (M320 Router) on page 11511 Copyright 2013,
Juniper Networks, Inc.M320 PICs SupportedTable 10: Service PICs
Supported by the M320Router (continued)First Junos OSRelease
Support Connector Model Number Ports PIC Family and Type8.1 None
PB-MS-100-1 0 100 Multiservices PIC8.1R2 None PB-MS-400-2 0 400
Multiservices PIC8.3 None PB-MS-500-3 0 500 Multiservices PICTunnel
Services PIC (M320 Router) on page 1496.2 None PB-TUNNEL-1 0 Type 1
Tunnel Services PIC6.2 None PB-TUNNEL 0 Type2Tunnel Services PIC6.3
None PC-TUNNEL 0 Type3Tunnel Services PICTable 11: SONET/SDHPICs
Supported by the M320RouterFirst Junos OSReleaseSupport Connector
Model Number Ports PIC Family and TypeSONET/SDH9.3R2 Optical: LC/PC
PB-4OC3-STM1-IQE-SFP 4 SONET/SDH OC3/STM1 Enhanced IQ(IQE) PIC with
SFP (M320 Router) onpage 118SONET/SDH OC3/STM1 (Multi-Rate) PICs
with SFP (M320 Router) on page 1218.4 Optical: LC/PC
PB-4OC3-1OC12-SON-SFP 4 SONET/SDH OC3/STM1 (Multi-Rate)PIC with
SFP8.3 Optical: LC/PC PB-4OC3-1OC12-SON2-SFP 4 SONET/SDH OC3/STM1
(Multi-Rate)PIC with SFP9.3 Optical: LC/PC PB-1OC12-STM4-IQE-SFP 1
SONET/SDH OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router)
onpage 124SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP (M320
Router) on page 1278.4 Optical: LC/PC PB-1OC12-SON-SFP 1
SONET/SDHOC12/STM4(Multi-Rate)PIC with SFP8.3 Optical: LC/PC
PB-4OC3-4OC12-SON-SFP 4 SONET/SDHOC12/STM4(Multi-Rate)PIC with
SFP6.2 Optical: LC/PC PC-4OC48-SON-SFP 4 SONET/SDH OC48c/STM16 PICs
withSFP (M320 Router) on page 130Copyright 2013, Juniper Networks,
Inc. 12M320 Multiservice Edge Router Interface Module
ReferenceTable 11: SONET/SDHPICs Supported by the M320Router
(continued)First Junos OSReleaseSupport Connector Model Number
Ports PIC Family and Type10.4R2 Optical: LC/PC
PC-4OC48-STM16-IQE-SFP 4 SONET/SDHOC48/STM16EnhancedIQ(IQE) PIC
with SFP (M320 Router) onpage 1338.3 Optical: LC/PC
PB-1OC48-SON-B-SFP 1
SONET/SDHOC48/STM16(Multi-Rate)PICwithSFP(M320Router) onpage1386.2
12-ribbonmultimode fiberwithMTPconnectorPC-1OC192-SON-VSR 1
SONET/SDHOC192c/STM64PIC(M320Router) on page 1418.1 Optical: LC/PC
PC-1OC192-SON-XFP 1 SONET/SDH OC192/STM64 PIC withXFP (M320 Router)
on page 144RelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 FPCs Supported on page 14 M320 PIC/FPC Compatibility
on page 1513 Copyright 2013, Juniper Networks, Inc.M320 PICs
SupportedM320FPCs SupportedTable 12 on page 14 lists the FPCs that
the M320 router supports. You can install anycombination of the
following FPCs in the M320 router.Table 12: FPCs Supported by the
M320RouterFirst Junos OSReleaseMaximumThroughput per
FPC(Full-Duplex)MaximumNumber of PICsSupportedFPC Model Number FPC
Name FPC Type6.2 4 Gbps 4 M320-FPC1 FPC1 17.5 4 Gbps 4 M320-FPC1-E2
Enhanced II FPC1 18.4 4 Gbps 4 M320-FPC1-E3 Enhanced III FPC1 16.2
16 Gbps 4 M320-FPC2 FPC2 27.5 16 Gbps 4 M320-FPC2-E2 Enhanced II
FPC2 28.4 16 Gbps 4 M320-FPC2-E3 Enhanced III FPC2 26.2 20 Gbps 2
M320-FPC3 FPC3 37.5 20 Gbps 2 M320-FPC3-E2 Enhanced II FPC3 38.4 20
Gbps 2 M320-FPC3-E3 Enhanced III FPC3
3RelatedDocumentationMaintaining M320 FPCs Replacing an M320 FPC
Troubleshooting the M320 FPCsCopyright 2013, Juniper Networks, Inc.
14M320 Multiservice Edge Router Interface Module ReferenceM320PIC
Combination LimitationsIn most cases, you can install PICs of
different media types on the same FPC as long asthe FPC and the
router support those PICs. However, configuration rules might
limitcertain combinations of PICs on some platforms.Newer Junos OS
services for some PICs can require significant Internet Processor
ASICmemory. Ethernet andSONETPICs typically donot uselargeamounts
of memory. GigabitEthernet, ATM2, IQserial PICs, and Multiservices
PICs use more. To conserve memory,you can group PICs in the same
family together on the same FPC.If you have different PIC families
on a single FPC, reviewthe configuration rules to planwhich PICs to
install on the FPCs for your router. Consult technical
bulletinPSN-2007-01-023 for information about configuration rules
for PIC combinations on theJuniper Networks Support site at
https://www.juniper.net/alerts/.WhenyouupgradetoJunos
OSRelease7.5or later, awarningappears if any configurationrules
affect your PIC combinations. If you continue the installation, one
or more PICsmight appear to be online (the LEDs are on), but the
Junos OS cannot enable themandthey cannot pass traffic. As a
workaround, you can: Install a Junos OS release that supports the
combination. Install PICs on a different FPC. Remove PICs fromthe
affected FPC.RelatedDocumentationM320 PIC Description on page 3
High Availability Features on page 4 M320 PICs Supported on page 5
M320 FPCs Supported on page 14 M320 PIC/FPC Compatibility on page
15M320PIC/FPC CompatibilityThe PIC/FPC compatibility matrixes list
the first Junos OS Release in which an FPCsupports
eachPICcurrentlysupportedfor theM320router. For example, Junos
OSRelease7.5 is the first release in which the E-II-FPC1 supports
the ATM2 OC3/STM1 IQ, 2-port PIC.NOTE: A indicates that the PIC is
not supported by the FPC. PIC/FPC Compatibility (Type 1 FPCs and
Type 1 PICs) on page 16 PIC/FPC Compatibility (Type 2 FPCs and Type
2 PICs) on page 19 PIC/FPC Compatibility (Type 3 FPCs and Type 3
PICs) on page 2115 Copyright 2013, Juniper Networks, Inc.M320 PIC
Combination LimitationsPIC/FPC Compatibility (Type 1 FPCs and Type
1 PICs)Table 13 on page 16 provides a PIC/FPC compatibility matrix
for the current Type 1 PICsfor the M320router and Type 1 FPCs.
Alink to the PICdescription is included in the table.Table 13:
M320PIC/FPC Compatibility Type 1E-III FPC1 E-II FPC1 FPC1 PIC Model
Number PICATM2 IQPICs8.4 7.5 6.4 PB-4DS3-ATM2 ATM2 DS3 IQPIC (M320
Router) onpage 234-port8.4 7.5 6.3 PB-4E3-ATM2 ATM2 E3 IQPIC (M320
Router) onpage 254-port8.4 7.5 6.2 PB-2OC3-ATM2-MM ATM2 OC3/STM1
IQPIC (M320Router) on page 272-port8.4 7.5 6.2 PB-2OC3-ATM2-SMIR8.4
7.5 6.2 PB-1OC12-ATM2-MM ATM2 OC12/STM4 IQPICs (M320Router) on page
301-port8.4 7.5 6.2 PB-1OC12-ATM2-SMIR8.4 7.5 6.2
PB-1OC12-ATM2-MMChannelized Circuit Emulation PICs9.4
PB-4CHOC3-CE-SFP Channelized OC3/STM1 CircuitEmulation PIC with SFP
(M320Router) on page 44Channelized IQPICs8.4 7.5 6.2 PB-4CHDS3-QPP
Channelized DS3 IQPIC (M320Router) on page
364-port9.1R49.2R39.3R19.1R49.2R39.3R19.1R49.2R39.3R1PB-1OCHE1-RJ48-QPP-N
ChannelizedE1 IQPIC(M320Router)on page 4210-port8.4 7.5 7.1
PB-1CHOC3-SMIR-QPP Channelized OC3 IQPIC (M320Router) on page
501-port8.4 7.5 6.2 PB-1CHSTM1-SMIR-QPP Channelized STM1 IQPIC
(M320Router) on page 681-portCopyright 2013, Juniper Networks, Inc.
16M320 Multiservice Edge Router Interface Module ReferenceTable 13:
M320PIC/FPC Compatibility Type 1 (continued)E-III FPC1 E-II FPC1
FPC1 PIC Model Number PIC8.4 7.5 7.4 PB-1OCHT1-RJ48-QPP Channelized
T1 IQPIC (M320Router) on page 7010-portChannelized Enhanced IQ(IQE)
PICs9.3 9.3 PB-4CHDS3-E3IQE-BNC Channelized DS3/E3 Enhanced IQ(IQE)
PIC(M320Router) on page 384-port9.5 9.5 PB-10CHE1-T1-IQE-RJ48
ChannelizedE1/T1 EnhancedIQ(IQE)PIC (M320 Router) on page
4710-port9.3 9.3 PB-2CHOC3-STM1-IQE-SFP ChannelizedOC3/STM1
EnhancedIQ(IQE) PIC with SFP (M320 Router)on page 532-port9.3 9.3
PB-1CHOC12-STM4-IQE-SFP Channelized OC12/STM4 EnhancedIQ(IQE)
PICwithSFP(M320Router)on page 58 IQE,1-portT1, DS3, E1, E3 PICs 6.2
PB-4DS3 DS3 EOL PIC (M320 Router),4-port9.3R2 9.3R2
PB-4DS3-E3-IQE-BNC DS3/E3 Enhanced IQ(IQE) PIC(M320 Router) on page
734-port8.4 7.5 6.4 PB-4E1-COAX E1 PICs (M320 Router) on page
76,4-port8.4 7.5 6.4 PB-4E1-RJ489.4 PB-12T1E1-CE-TELCO E1/T1
Circuit Emulation PIC (M320Router) on page 78, 12-port 7.5 6.3
PB-4E3 E3 PIC (M320 Router) on page 82,4-port8.4 7.5 6.4
PB-4T1-RJ48 T1 PIC (M320 Router) on page 147,4-portE3 IQPIC8.4 7.5
6.2 PB-4E3-QPP E3IQPIC(M320Router) onpage84,4-portEIA-530PIC17
Copyright 2013, Juniper Networks, Inc.M320 PIC/FPC
CompatibilityTable 13: M320PIC/FPC Compatibility Type 1
(continued)E-III FPC1 E-II FPC1 FPC1 PIC Model Number PIC8.4 7.5
6.2 PB-2EIA530 EIA-530 PIC (M320 Router) onpage 86,2-portEthernet
PICs8.4 7.5 6.2 PB-4FE-TX Fast Ethernet PICs (M320 Router)on page
89,4-port8.4 7.5 6.3 PB-8FE-FX Fast Ethernet PICs (M320 Router)on
page 89,8-port8.4 7.5 6.2 PB-12FE-TX Fast Ethernet PICs (M320
Router)on page 89,12-port8.4 7.5 6.4 PB-1GE-SFP Gigabit Ethernet
PICs with SFP(M320 Router) on page 92,1-port SFPEthernet IQPICs8.4
7.5 6.2 PB-1GE-SFP-QPP Gigabit Ethernet IQPICs with SFP(M320
Router) on page 95,1-port SFPEthernet IQ2 PICs8.4 7.6R3 7.6R3
PB-4GE-TYPE1-SFP-IQ2 Gigabit Ethernet IQ2 PICs with SFP(M320
Router) on page 97,4-port SFPEthernet Enhanced IQ2 (IQ2E) PICs9.4
9.4 9.4 PB-4GE-TYPE1-SFP-IQ2E Gigabit Ethernet Enhanced IQ2(IQ2E)
PICs with SFP(M320Router)on page 101,4-port SFPServices PICs8.4 8.1
8.1 PB-MS-100-1 Multiservices PICs (M320 Router)on page 115 1008.4
7.5 6.2 PB-TUNNEL-1 Tunnel Services PIC (M320 Router)on page
149Copyright 2013, Juniper Networks, Inc. 18M320 Multiservice Edge
Router Interface Module ReferenceTable 13: M320PIC/FPC
Compatibility Type 1 (continued)E-III FPC1 E-II FPC1 FPC1 PIC Model
Number PICSONET/SDHPICs9.3R2 9.3R2 PB-4OC3-STM1-IQE-SFP SONET/SDH
OC3/STM1 EnhancedIQ(IQE) PICwithSFP(M320Router)on page 1184-port,
SFP8.4 8.4 8.4 PB-4OC3-1OC12-SON-SFP SONET/SDHOC3/STM1
(Multi-Rate)PICs with SFP (M320 Router) onpage 121,4-port, SFP
(Type 1)9.3 9.3 PB-1OC12-STM4-IQE-SFP SONET/SDH OC12/STM4
EnhancedIQ(IQE) PICwithSFP(M320Router)on page 124,1-port, SFP8.4
8.4 8.4 PB-1OC12-SON-SFP SONET/SDH OC12/STM4(Multi-Rate) PICs with
SFP (M320Router) on page 127),1-port, SFPPIC/FPC Compatibility
(Type 2 FPCs and Type 2 PICs)Table 14 on page 19 provides a PIC/FPC
compatibility matrix for the current Type 2 PICsfor the M320router
and Type 2 FPCs. Alink to the PICdescription is included in the
table.Table 14: M320PIC/FPC Compatibility Type 2E-III-FPC2 E-II
FPC2 FPC2 Model Number PICATM2 IQPICs8.4 7.5 6.2 PB-2OC12-ATM2-MM
ATM2 OC12/STM4 IQPICs(M320 Router) on page 302-port8.4 7.5 6.2
PB-2OC12-ATM2-SMIRATM2 OC12/STM4 IQPICs (M320 Router) onpage 308.4
7.5 7.3 PB-1OC48-ATM2-SFP ATM2 OC48/STM16IQPICwithSFP (M320 Router)
on page 331-portChannelized Enhanced IQ(IQE) PICs9.4
PB-4CHOC12-STM4-IQE-SFP Channelized OC12/STM4Enhanced IQ(IQE)
PICwith SFP(M320 Router) on page 584-port19 Copyright 2013, Juniper
Networks, Inc.M320 PIC/FPC CompatibilityTable 14: M320PIC/FPC
Compatibility Type 2 (continued)E-III-FPC2 E-II FPC2 FPC2 Model
Number PIC9.4 PB-1CHOC48-STM16-IQE Channelized OC48/STM16Enhanced
IQ(IQE) PICwith SFP(M320 Router) on page 631-portEthernet PICs8.4
7.5 6.4 PB-48FE-TX Fast Ethernet PICs (M320Router) on page 89
48-port8.4 7.5 6.4 PB-2GE-SFP Gigabit Ethernet PICs with SFP(M320
Router) on page 922-port8.4 7.5 7.0 PB-4GE-SFP Gigabit Ethernet
PICs with SFP(M320 Router) on page 924-portEthernet IQPICs8.4 7.5
6.2 PB-2GE-SFP-QPP Gigabit Ethernet IQPICs withSFP(M320Router) on
page 952-portEthernet IQ2 PICs8.4 7.6R2 7.6R2 PB-8GE-TYPE2-SFP-IQ2
Gigabit Ethernet IQ2 PICs withSFP (M320 Router) on page
978-portEthernet Enhanced IQ2 (IQ2E) PICs9.4 9.4 9.4
PB-8GE-TYPE2-SFP-IQ2E Gigabit Ethernet Enhanced IQ2(IQ2E) PICs with
SFP (M320Router) on page 101 8-portServices PICs8.4 8.1R2 8.1R2
PB-MS-400-2 Multiservices PICs (M320Router) on page 115 4008.4 7.5
6.3 PB-TUNNEL Tunnel Services PIC (M320Router) on page
149SONET/SDHPICs8.4 8.3 8.3 PB-4OC3-1OC12-SON2-SFP SONET/SDH
OC3/STM1(Multi-Rate) PICs with SFP(M320 Router) on page
1214-port8.4 8.3 8.3 PB-4OC3-4OC12-SON-SFP SONET/SDH
OC12/STM4(Multi-Rate) PICs with SFP(M320 Router) on page
1274-portCopyright 2013, Juniper Networks, Inc. 20M320 Multiservice
Edge Router Interface Module ReferenceTable 14: M320PIC/FPC
Compatibility Type 2 (continued)E-III-FPC2 E-II FPC2 FPC2 Model
Number PIC8.4 8.3 8.3 PB-1OC48-SON-B-SFP SONET/SDH
OC48/STM16(Multi-Rate) PIC with SFP(M320 Router) on page
1381-portPIC/FPC Compatibility (Type 3 FPCs and Type 3 PICs)Table
15 on page 21 provides a PIC/FPC compatibility matrix for the
current Type 3 PICsfor the M320router and Type 3 FPCs. Alink to the
PICdescription is included in the table.Table 15: M320PIC/FPC
Compatibility Type 3E-III-FPC3 E-II-FPC3 FPC3 Model Number
PICEthernet PICs8.4 7.5 6.2 PC-10GE-SFP Gigabit Ethernet PICs with
SFP(M320 Router) on page 9210-port10-Gigabit Ethernet PICs8.4 7.5
6.2 PC-1XGE-XENPAK 10-Gigabit Ethernet PIC withXENPAK (M320 Router)
onpage 111 1port8.4 7.5 7.5 PC-1XGE-DWDM-CBAND 10-Gigabit Ethernet
DWDMPIC(M320Router) onpage1131portEthernet IQ2 PICs8.4 8.2 8.2
PC-8GE-TYPE3-SFP-IQ2 Gigabit Ethernet IQ2 PICs withSFP (M320
Router) on page 978port8.4 8.0R3 8.0R3 PC-1GE-TYPE3-XFP-IQ2 Gigabit
Ethernet IQ2 PICs withSFP (M320 Router) on page 971portEthernet
Enhanced IQ2 (IQ2E) PICs9.4 9.4 9.4 PC-8GE-TYPE3-SFP-IQ2E Gigabit
Ethernet Enhanced IQ2(IQ2E) PICs with SFP (M320Router) on page 101
8-port9.4 9.4 9.4 PC-1XGE-TYPE3-XFP-IQ2E 10-Gigabit Ethernet
EnhancedIQ2 (IQ2E) PIC with XFP (M320Router) on page 108
1-portServices PICs8.4 8.3 8.3 PC-MS-500-3 Multiservices PICs
(M320Router) on page 115 50021 Copyright 2013, Juniper Networks,
Inc.M320 PIC/FPC CompatibilityTable 15: M320PIC/FPC Compatibility
Type 3 (continued)E-III-FPC3 E-II-FPC3 FPC3 Model Number PIC8.4 7.5
6.3 PC-TUNNEL Tunnel Services PIC (M320Router) on page
149SONET/SDHPICs10.4R2 PC-4OC48-STM16-IQE-SFP SONET/SDH
OC48/STM16Enhanced IQ(IQE) PIC with SFP(M320Router)
onpage1334-port8.4 7.5 6.2 PC-4OC48-SON-SFP
SONET/SDHOC48c/STM16PICswith SFP (M320 Router) onpage 130 4-port8.4
7.5 6.2 PC-1OC192-SON-VSR SONET/SDH OC192c/STM64PIC (M320 Router)
on page 1411-port8.4 8.1 8.1 PC-1OC192-SON-SFP
SONET/SDHOC192/STM64PICwith XFP (M320 Router) onpage 144
1-portRelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 PICs Supported on page 5 M320 FPCs Supported on page
14Copyright 2013, Juniper Networks, Inc. 22M320 Multiservice Edge
Router Interface Module ReferenceATM2 DS3 IQPIC (M320Router) Junos
OS Release 6.4 and later (Type 1)For information on which FPCs
support this PIC, see M320PIC/FPCCompatibility on page 15.Software
release Four DS3 ports Power requirement: 0.41 A @48 V (20.0 W)
Fine-grained queuing per logical interface ATMstandards compliant
Model number: PB-4DS3-ATM2Description 16-MB SDRAMmemory for
ATMsegmentation and reassembly (SAR) ATMswitch ID Configurable
framing options: C-bit with ATMdirect mapping C-bit with Physical
Layer Convergence Protocol (PLCP) framing (default) M23 ATMdirect
mapping M23 with PLCP framing Internal and loop timingHardware
features23 Copyright 2013, Juniper Networks, Inc.ATM2 DS3 IQPIC
(M320 Router) Per-virtual circuit (VC) and per-virtual path (VP)
traffic shaping Unspecified bit rate (UBR) traffic shaping
Fine-grained variable bit rate (VBR) traffic shaping Circuit
cross-connect (CCC) ATMInverse Address Resolution Protocol (ARP),
which enables routers to automatically learnthe IP address of the
router on the far end of an ATMpermanent virtual circuit (PVC)
Simple Network Management Protocol (SNMP): Management Information
Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB AAL5
encapsulations: ATM-VC-MUX ATM-NLPID ATM-Cisco-LLPID ATM-SNAP
ATM-CCC-VC-MUXSoftware features 10 ft (3.05 m) posilock SMB to BNC
(provided) Four pairs of Rx and Tx coaxial cablesCables and
connectorsOne tricolor per port: OffNot enabled GreenOnline with no
alarms or failures YellowOnline with alarms for remote failures
RedActive with a local alarm; router has detected a failureLEDs
Alarmindication signal (AIS) Far-end block error (FEBE) Frame error
Idle code Idle received Local and remote loopback Loss of signal
(LOS) Out of frame (OOF) Path parity error YellowalarmAlarms,
errors, andeventsRelatedDocumentationM320 PIC Description on page 3
High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 5Copyright 2013,
Juniper Networks, Inc. 24M320 Multiservice Edge Router Interface
Module ReferenceATM2 E3 IQPIC (M320Router) Junos OS Release 6.3 and
later (Type 1)For information on which FPCs support this PIC, see
M320PIC/FPCCompatibility on page 15.Software release Four E3 ports
Power requirement: 0.41 A @48 V (20 W) Fine-grained queuing per
logical interface ATMstandards compliant Model number:
PB-2E3-ATM2Description 16-MB SDRAMmemory for ATMsegmentation and
reassembly (SAR) ATMswitch ID Configurable framing options: G.751
direct mapping G.751 with PLCP encapsulation (default) G.832
ATMdirect mapping Internal and loop timingHardware features25
Copyright 2013, Juniper Networks, Inc.ATM2 E3 IQPIC (M320 Router)
Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping
Unspecified bit rate (UBR) traffic shaping Fine-grained variable
bit rate (VBR) traffic shaping Circuit cross-connect (CCC)
ATMInverse Address Resolution Protocol (ARP), which enables routers
to automatically learnthe IP address of the router on the far end
of an ATMpermanent virtual circuit (PVC) Simple Network Management
Protocol (SNMP): Management Information Base (MIB) 2 (RFC 1213)
ATMMIB (RFC 1695) SONET MIB AAL5 encapsulations: ATM-VC-MUX
ATM-NLPID ATM-Cisco-LLPID ATM-SNAP ATM-CCC-VC-MUXSoftware features
10 ft (3.05 m) posilock SMB to BNC (provided) Four pairs of Rx and
Tx coaxial cablesCables and connectorsOne tricolor per port: OffNot
enabled GreenOnline with no alarms or failures YellowOnline with
alarms for remote failures RedActive with a local alarm; router has
detected a failureLEDs Alarmindication signal (AIS) Frame error
Line code violation Local and remote loopback Loss of signal (LOS)
Out of frame (OOF) YellowalarmAlarms, errors,
andeventsRelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 PICs Supported on page 5Copyright 2013, Juniper
Networks, Inc. 26M320 Multiservice Edge Router Interface Module
ReferenceATM2 OC3/STM1 IQPIC (M320Router) Junos OS Release 6.2 and
later (Type 1)For information on which FPCs support this PIC, see
M320PIC/FPCCompatibility on page 15.Software release Two OC3 ports
Power requirement: 0.41 A @48 V (20 W) Fine-grained queuing per
logical interface Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
ATMand SONET/SDH standards compliant Alarmand event counting and
detection Compatible with well-known ATMswitches ATMswitch ID,
which displays the switch IP address and local interface name of
the adjacentFore ATMswitches Model number:
PB-2OC3-ATM2-MMPB-2OC3-ATM2-SMIRDescription Single 3010 SAR for
segmentation and reassembly into 53 byte ATMcells High-performance
parsing of SONET/SDH frames ASIC-basedpacket
segmentationandreassembly(SAR) management andoutput port queuing 64
MB SDRAMmemory for ATMSAR Packet buffering, Layer 2 parsingHardware
features27 Copyright 2013, Juniper Networks, Inc.ATM2 OC3/STM1
IQPIC (M320 Router) Circuit cross-connect (CCC) for leveraging
ATMaccess networks User-configurable virtual circuit (VC) and
virtual path (VP) support Support for idle cell or unassigned cell
transmission OAMfault management processes alarmindication signal
(AIS), remote defect indication(RDI) cells, and loop cells
Point-to-point and point-to-multipoint mode Layer 2 counters per VC
and per VP Local and remote loopback ATMInverse Address Resolution
Protocol (ARP), which enables routers to automatically learnthe IP
address of the router on the far end of an ATMpermanent virtual
circuit (PVC) Simple Network Management Protocol (SNMP): Management
Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR),
and constant bit rate (CBR)traffic shaping Per-VC or per-VP traffic
shaping Support for F4 OAMcells Support for 16 bit VCI
rangeSoftware features Duplex SC/PC connector (RX and TX) SONET/SDH
OC3/STM1 fixed transceivers: Multimode Intermediate reach
(IR-1)Optical interface specificationssee SONET/SDH OC3/STM1
Optical Interface SpecificationsCables and connectorsOne tricolor
per port: OffNot enabled GreenOnline with no alarms or failures
YellowOnline with alarms for remote failures RedActive with a local
alarm; router has detected a failureLEDsCopyright 2013, Juniper
Networks, Inc. 28M320 Multiservice Edge Router Interface Module
Reference Alarmindication signalline (AIS-L) Alarmindication
signalpath (AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error
ratesignal fail (BERR-SF) Loss of cell delineation (LOC) Loss of
frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload
mismatch (PLM-P) Payload unequipped (unequipped STS at path level)
(UNEQ-P) Remote defect indicationline (RDI-L) Remote defect
indicationpath (RDI-P) Error detection: Bit interleaved parity
errors B1, B2, B3 Errored seconds (ES-S, ES-L, ES-P) Far-endbit
errors, remoteerror indicationline(REI-L),
far-endlinecodingviolations(CV-LFE) Far-end bit errors, remote
error indicationpath (REI-P), far-end path coding
violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE) Far-end
severely errored seconds (SES-LFE, SES-PFE) Far-end unavailable
seconds (UAS-LFE, UAS-PFE) Severely errored frames (SEF) Severely
errored framing seconds (SEFS-S) Severely errored seconds (SES-S,
SES-L, SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors,
andeventsRelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 PICs Supported on page 529 Copyright 2013, Juniper
Networks, Inc.ATM2 OC3/STM1 IQPIC (M320 Router)ATM2 OC12/STM4
IQPICs (M320Router)Figure 2: 2-Port ATM2 OC12/STM4 IQPIC Figure 1:
1-Port ATM2 OC12/STM4 IQPIC Junos OS Release 6.2 and later (Type 1
and Type 2)For information on which FPCs support this PIC, see
M320PIC/FPCCompatibility on page 15.Software release One or two
OC12 ports Power requirement: 1-port: 0.41 A @48 V (20 W) 2-port:
0.52 A @48 V (25 W) Fine-grained queuing per logical interface
Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 Complies with
ATMand SONET/SDH standards Alarmand event counting and detection
Compatible with well-known ATMswitches ATMswitch ID, which displays
the switch IP address and local interface name of the adjacentFore
ATMswitches Model number for 1-Port ATM2 OC12/STM4 IQPIC:
PB-1OC12-ATM2-MMPB-1OC12-ATM2-SMIRModel number for 2-Port ATM2
OC12/STM4 IQPIC: PB-2OC12-ATM2-MMPB-2OC12-ATM2-SMIRDescription ATM2
IQ1-port OC12 PICs have one 3010 SAR for segmentation and
reassembly into 53-byteATMcells; ATM2 IQ2-port OC12 PICs have dual
3010 SAR High-performance parsing of SONET/SDH frames
ASIC-basedpacket segmentationandreassembly(SAR) management
andoutput port queuing 64 MB SDRAMmemory for ATMSAR Packet
buffering, Layer 2 parsingHardware featuresCopyright 2013, Juniper
Networks, Inc. 30M320 Multiservice Edge Router Interface Module
Reference Circuit cross-connect for leveraging ATMaccess networks
User-configurable virtual circuit (VC) and virtual path (VP)
support Support for idle cell or unassigned cell transmission
OAMfault management processes alarmindication signal (AIS), remote
defect indication(RDI), and loop cells Point-to-point and
point-to-multipoint mode Layer 2 counters per VC and per VP Local
and remote loopback ATMInverse ARP, which enables routers to
automatically learn the IP address of the router onthe far end of
an ATMPVC Simple Network Management Protocol (SNMP): Management
Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695) SONET MIB
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR),
and constant bit rate (CBR)traffic shaping Per-VC or per-VP traffic
shaping Support for F4 OAMcells Support for 16-bit VCI
rangeSoftware features Duplex SC/PC connector (Rx and Tx) SONET/SDH
OC12/STM4 fixed transceivers: Multimode Intermediate reach
(IR-1)Optical interface specificationssee SONET/SDH OC12/STM4
Optical Interface SpecificationsCables and connectorsOne tricolor
per port: OffNot enabled GreenOnline with no alarms or failures
YellowOnline with alarms for remote failures RedActive with a local
alarm; router has detected a failureLEDs31 Copyright 2013, Juniper
Networks, Inc.ATM2 OC12/STM4 IQPICs (M320 Router) Alarmindication
signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error
ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF)
Loss of cell delineation (LOC) Loss of frame (LOF) Loss of pointer
(LOP-P) Loss of signal (LOS) Payload mismatch (PLM-P) Payload
unequipped (unequipped STS at path level) (UNEQ-P) Remote defect
indicationline (RDI-L) Remote defect indicationpath (RDI-P) Error
detection: Bit interleaved parity errors B1, B2, B3 Errored seconds
(ES-S, ES-L, ES-P) Far-endbit errors, remoteerror
indicationline(REI-L), far-endlinecodingviolations(CV-LFE) Far-end
bit errors, remote error indicationpath (REI-P), far-end path
coding violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE)
Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end
unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames
(SEF) Severely errored framing seconds (SEFS-S) Severely errored
seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L,
UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC
Description on page 3 High Availability Features on page 4 M320 PIC
Combination Limitations on page 15 M320 PICs Supported on page
5Copyright 2013, Juniper Networks, Inc. 32M320 Multiservice Edge
Router Interface Module ReferenceATM2 OC48/STM16 IQPIC with SFP
(M320Router) Junos OS Release 7.3 and later (Type 2)For information
on which FPCs support this PIC, see M320PIC/FPCCompatibility on
page 15.Software release One OC48 port Power requirement: 0.41 A
@48 V ( 20 W) Fine-grained queuing per logical interface Conforms
to ANSI T1.105-1991 and T1E1.2/93-020R1 Complies with ATMand
SONET/SDH standards Alarmand event counting and detection
Compatible with well-known ATMswitches ATMswitch ID, which displays
the switch IP address and local interface name of the adjacentFore
ATMswitchesDescription ATM2 IQ1-port OC48 PICs have one 3010 SAR
for segmentation and reassembly into 53-byteATMcells.
High-performance parsing of SONET/SDH frames ASIC-basedpacket
segmentationandreassembly(SAR) management andoutput port queuing
64-MB SDRAMmemory for ATMSAR Packet buffering, Layer 2 parsing
Model number: PB-1OC48-ATM2-SFPHardware features33 Copyright 2013,
Juniper Networks, Inc.ATM2 OC48/STM16 IQPIC with SFP (M320 Router)
Multiprotocol Label Switching(MPLS) circuit cross-connect for
leveragingATMaccess networks User-configurable virtual circuit (VC)
and virtual path (VP) support Support for idle cell or unassigned
cell transmission OAMfault management processes alarmindication
signal (AIS), remote defect indication(RDI), and loop cells
Point-to-point and point-to-multipoint mode Layer 2 counters per VC
and per VP Local and remote loopback ATMInverse ARP, which enables
routers to automatically learn the IP address of the router onthe
far end of an ATMPVC Simple Network Management Protocol (SNMP):
Management Information Base (MIB) 2 (RFC 1213) ATMMIB (RFC 1695)
SONET MIB Unspecified bit rate (UBR), non-real-time variable bit
rate (VBR), and constant bit rate (CBR)traffic shaping Per-VC or
per-VP traffic shaping Support for F4 OAMcells Support for 16-bit
VCI rangeSoftware features Duplex LC/PC connector (RX and TX)
SONET/SDH OC48/STM16 fiber-optic SFPs: Intermediate reach (IR-1)
(model number: SFP-1OC48IR)Optical
interfacespecificationsseeSONET/SDHOC48/STM16Optical
InterfaceSpecificationsCables and connectorsOne tricolor per port:
OffNot enabled GreenOnline with no alarms or failures YellowOnline
with alarms for remote failures RedActive with a local alarm;
router has detected a failureLEDsCopyright 2013, Juniper Networks,
Inc. 34M320 Multiservice Edge Router Interface Module Reference
Alarmindication signalline (AIS-L) Alarmindication signalpath
(AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal
fail (BERR-SF) Loss of cell delineation (LOC) Loss of frame (LOF)
Loss of pointer (LOP-P) Loss of signal (LOS) Payload mismatch
(PLM-P) Payload unequipped (unequipped STS at path level) (UNEQ-P)
Remote defect indicationline (RDI-L) Remote defect indicationpath
(RDI-P) Error detection: Bit interleaved parity errors B1, B2, B3
Errored seconds (ES-S, ES-L, ES-P) Far-endbit errors, remoteerror
indicationline(REI-L), far-endlinecodingviolations(CV-LFE) Far-end
bit errors, remote error indicationpath (REI-P), far-end path
coding violations(CV-PFE) Far-end errored seconds (ES-LFE, ES-PFE)
Far-end severely errored seconds (SES-LFE, SES-PFE) Far-end
unavailable seconds (UAS-LFE, UAS-PFE) Severely errored frames
(SEF) Severely errored framing seconds (SEFS-S) Severely errored
seconds (SES-S, SES-L, SES-P) Unavailable seconds (UAS-L,
UAS-P)Alarms, errors, andeventsRelatedDocumentationM320 PIC
Description on page 3 High Availability Features on page 4 M320 PIC
Combination Limitations on page 15 M320 PICs Supported on page 535
Copyright 2013, Juniper Networks, Inc.ATM2 OC48/STM16 IQPIC with
SFP (M320 Router)Channelized DS3 IQPIC (M320Router) Junos OS
Release 6.2 and later (Type 1)For information on which FPCs support
this PIC, see M320PIC/FPCCompatibility on page 15.Software release
Four DS3 ports Power requirement: 0.32 A @48 V (15.6 W)
Fine-grained queuing per logical interface Channelization: DS3,
DS1, DS0 Model number: PB-4CHDS3-QPPDescription Data service unit
(DSU) functionality Subrate and scrambling: Digital Link/Quick
Eagle Kentrox Larscom ADTRAN Verilink B3ZS line encoding M13 or
C-bit parity Full bit error rate test (BERT) Local and remote
loopback testingHardware featuresCopyright 2013, Juniper Networks,
Inc. 36M320 Multiservice Edge Router Interface Module Reference
Quality of service (QoS) per channel: weighted round-robin (WRR),
randomearly detection(RED), weighted randomearly detection (WRED)
Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB
Dynamic, arbitrary channel configuration Encapsulations: Circuit
cross-connect (CCC) Translational cross-connect (TCC) Frame Relay
High-Level Data Link Control (HDLC) Point-to-Point Protocol
(PPP)Software features Standard DS3 BNC coaxial cable interfaces
Cables and connectorsOne tricolor per port: OffNot enabled
GreenOnline with no alarms or failures YellowOnline with alarms for
remote failures RedActive with a local alarm; router has detected a
failureLEDs Alarmindication signal (AIS) Excessive zeros (EXZ)
Far-end block error (FEBE) Frame error Idle code, Idle received
Line code violation (LCV) Loss of signal (LOS) Out of frame (OOF)
Parity bit (P-bit) disagreements Path parity error Yellowalarmbit
(X-bit) disagreementsAlarms, errors, andevents Layer 2 per-queue
and per-channel packet and byte counters
Instrumentation(counters)RelatedDocumentationM320 PIC Description
on page 3 High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 537 Copyright
2013, Juniper Networks, Inc.Channelized DS3 IQPIC (M320
Router)Channelized DS3/E3 Enhanced IQ(IQE) PIC (M320Router)g002620
Junos OS Release 9.3 and later (Type 1)For information on which
FPCs support this PIC, see M320PIC/FPCCompatibility on page
15.Software release Four E3 or Channelized DS3 ports E3 or
Channelized DS3 is configurable on a per-port granularity DS3
channelization: 4 DS3 channels 112 DS1 channels 1011 DS0 channels
Power requirement: 0.53 A @48 V (25.4 W) Model number:
PB-4CHDS3-E3-IQE-BNCDescription Ports are numbered 0 through 3 top
to bottom Hardware featuresSoftware features Maximumtransmission
units (MTUs) of up to 9000 bytes Dynamic, arbitrary channel
configuration Subrate and scrambling:NOTE: Only DS3 supports
subrate and scrambling. Digital Link/Quick Eagle Kentrox Larscom
ADTRAN Verilink (subrate: only port A mode)NOTE: For DS3
interfaces, Verilink does not function if an IQE interface is
paired with an IQinterface.Copyright 2013, Juniper Networks, Inc.
38M320 Multiservice Edge Router Interface Module Reference Data
service unit (DSU) functionality B3ZS line encoding Framing: M13,
C-bit parity, framed clear channel Full bit error rate test (BERT)
for DS0, DS1, and DS3 ANSI T1.403 FDL Internal and loop clocking
for DS3 and DS1 DS3 far end alarmand control (FEAC) channel Local
line, remote line, and remote playback loopback testing for each
DS3 and DS1 channel Quality of service (QoS) per channel: weighted
round-robin (WRR), randomearly detection(RED), weighted randomearly
detection (WRED) Enhancedfine-grainedqueuingper logical interface.
SeetheJunos OSClass of Service Libraryfor Routing Devices for more
information about class of service features. Simple Network
Management Protocol (SNMP): DS1 MIB, DS3 MIB Encapsulations:
Circuit cross-connect (CCC) Translational cross-connect (TCC)
Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame
Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC
High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC
framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI
NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for
TCC Standard DS3 BNC coaxial cable interfaces Cables and
connectorsOne tricolor per port: OffNot enabled GreenOnline with no
alarms or failures YellowOnline with alarms for remote failures
RedActive with a local alarm; router has detected a failureLEDs39
Copyright 2013, Juniper Networks, Inc.Channelized DS3/E3 Enhanced
IQ(IQE) PIC (M320 Router) Alarmreporting for error statistics and
failure counts DS1 alarms: Alarmindication signal (AIS) Loss of
frame (LOF) Remote alarmindication signal (RAIS) DS1 error
detection: Bursty errored seconds (BES) CRC errors Errored seconds
(ES) Line errored seconds (LES) Loss of framing seconds (LOFS) Loss
of signal seconds (LOS) Severely errored seconds (SES) Severely
errored framing seconds (SEFS) Unavailable seconds (UAS) DS3
alarms: Alarmindication signal (AIS) Loss of frame (LOF) Loss of
signal (LOS) Phase lock loop (PLL) Yellowalarm DS3 error detection:
When running bit error rate test (BERT) on 4-port CHDS3/E3 IQE
PICs, where DS3/E3 is notSONET/SDH mapped, the LOF is reported and
errors can be seen on the remote side. Bothlocal and remote ends
are C-bit framed and do not showerrors when the bit error rate
testis not running. When the bit error rate test is begun, framing
mode on the local interface isset to unframed while the remote
interface is still set to C-bit. This behavior is expected
the4-port CHDS3/E3IQEPICs sinceAmur Framingdoes not support
framedbit error ratetesting. C-bit code violations (CCV) C-bit
errored seconds (CES) C-bit severely errored framing seconds (CEFS)
CRC errors Excessive zeros (EXZ) Far-end block error (FEBE)Upon
initiation of the FEAC loop fromthe local port to the remote port,
far-end block errors(FEBEs) are detected in the remote port
statistics, this is expected behavior and these errorsshould be
suppressed. Far-end receive failure (FERF) Line errored seconds
(LES) Parity bit (P-bit) code violations (PCV) Parity bit (P-bit)
errored seconds (PES) Parity bit (P-bit) severely errored framing
seconds (PSES) Severely errored framing seconds (SEFS) Unavailable
seconds (UAS)Alarms, errors, andevents Layer 2 per-queue and
per-channel packet and byte counters
Instrumentation(counters)Copyright 2013, Juniper Networks, Inc.
40M320 Multiservice Edge Router Interface Module
ReferenceRelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 PICs Supported on page 541 Copyright 2013, Juniper
Networks, Inc.Channelized DS3/E3 Enhanced IQ(IQE) PIC (M320
Router)Channelized E1 IQPIC (M320Router) PB-1OCHE1-RJ48-QPP-N:
Junos OS Release 9.1R4, 9.2R3, 9.3R1 and laterFor information on
which FPCs support this PIC, see M320PIC/FPCCompatibility on page
15.Software release Ten E1 ports Power requirement: 0.15 A @48 V
(7.2 W) Fine-grained queuing per logical interface Channelization:
E1, DS0 Model number: PB-10CHE1-RJ48-QPP-NDescription Data service
unit (DSU) functionality Ports configurable as clear channel E1
interfaces with 2.048-Mbps connectivity Supports unframed E1 G.703
and G.704 framing modes Supports HDB3 line coding CRC4 configurable
Local and remote loopback testingHardware features Quality of
service (QoS) per channel: weighted round-robin (WRR), randomearly
detection(RED), weighted randomearly detection (WRED) Simple
Network Management Protocol (SNMP): E1 MIB, DS0 MIB Dynamic,
arbitrary channel configuration Full bit error rate test (BERT)
Encapsulations: Circuit cross-connect (CCC) Translational
cross-connect (TCC) Frame Relay High-Level Data Link Control (HDLC)
Point-to-Point Protocol (PPP)Software features 120-ohmRJ-48C Cables
and connectorsCopyright 2013, Juniper Networks, Inc. 42M320
Multiservice Edge Router Interface Module ReferenceOne bicolor per
E1 port: OffPort not enabled GreenPhysical E1 link is up;
individual subchannels can be down RedPhysical E1 link is downLEDs
Alarmindication signal (AIS) Loss of frame (LOF) Out of frame (OOF)
Failed signal rate (FSR)Alarms, errors, andevents Layer 2 per-queue
and per-channel packet and byte counters
Instrumentation(counters)RelatedDocumentationM320 PIC Description
on page 3 High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 543 Copyright
2013, Juniper Networks, Inc.Channelized E1 IQPIC (M320
Router)Channelized OC3/STM1 Circuit Emulation PIC with SFP
(M320Router) Junos OS Release 9.4 and later (Type 1)For information
on which FPCs support this PIC, see M320PIC/FPCCompatibility on
page 15.Software release Four OC3/STM1 ports Power requirement:
0.52 A @48 V (25 W) Channelization: DS1Channelization down to
E1/T1Each port can be channelized as 84 T1 ports for a total of 336
T1 pseudowires or 63 E1 portsfor a total of 252 pseudowires. Model
number: PB-4CHOC3-CE-SFPDescription Subrate and scrambling: Digital
Link/Quick Eagle Kentrox Larscom ADTRAN Verilink M13/C-bit parity
encoding Local and remote loopback testingHardware
featuresCopyright 2013, Juniper Networks, Inc. 44M320 Multiservice
Edge Router Interface Module Reference Loop timing and external
timing Optical diagnostics AM1 or B8ZS line encoding APS/SDH MSP
Fractional mode and framed clear channel mode Superframe (D4/SF)
and extended superframe (ESP) framing Simple Network Management
Protocol (SNMP): OC3 MIB T1 MIB ATMMIB (Junos OS Release 10.2 and
later) Automatic protection switching (APS) Dynamic, arbitrary
channel configuration Full bit error rate test (BERT)
Encapsulations: Structure-agnostic time-division multiplexing (TDM)
over packet (SAToP)(RFC 4553) Pseudowire emulation edge-to-edge
(PWE3) for ATM(RFC 4717) (Junos OS Release 9.6 andlater)
ATMPseudowire emulation edge-to-edge via dynamic labels (LDP,
RSVP-TE) (Junos OSRelease 9.6 and later) Inverse mulitplexing (IMA)
for ATM(Junos OS Release 10.0 and later) ATMQoS for the Junos OS
Release 10.2 and later: Per-virtual circuit (VC) and per-virtual
path (VP) traffic shaping Unspecified bit rate (UBR) traffic
shaping Fine-grained real-time variable bit rate (rtVBR) and
real-time variable bit rate (nrtVBR)traffic shaping Port-level
egress shaping Constant bit rate (CBR) Policing on a per virtual
circuit basis Independent peak cell rate (PCR) and sustained cell
rate (SCR) policing Counting, tagging, or discard policing
actionsSoftware features Duplex LC/PC connector (Rx and Tx)
SONET/SDH OC3/STM1 fiber-optic SFPs: Multimode (model number:
SFP-OC3-SR) Intermediate reach (IR-1) (model number: SFP-OC3-IR)
Long reach (IR-1) (model number: SFP-OC3-LR)Optical interface
specificationssee SONET/SDH OC3/STM1 Optical Interface
SpecificationsCables and connectors45 Copyright 2013, Juniper
Networks, Inc.Channelized OC3/STM1 Circuit Emulation PIC with SFP
(M320 Router)OK LED, one tricolor: OffPIC is offline and it is safe
to remove it fromthe router. GreenPIC is operating normally.
YellowPIC is initializing. RedPIC has an error or failure.APP LED,
one bicolor: OffMonitoring application is not running.
GreenMonitoring application is running under acceptable load.One
tricolor per port: OffNot enabled GreenOnline with no alarms or
failures YellowOnline with alarms for remote failures RedActive
with a local alarm; router has detected a
failureLEDsStructure-agnostic alarms for T1 interface:
Alarmindication signal (AIS-L, AIS-P) Loss of signal (LOS) Errored
seconds (ES) Line-errored seconds (LES) Severely errored seconds
(SES) Unavailable errored seconds (UAS) Bipolar violation (BPV)
Controlled slip (CS) Line code violation (LCV)Structure-agnostic
alarms for E1 interface: Alarmindication signal (AIS-L, AIS-P) Loss
of signal (LOS) Errored seconds (ES) Line-errored seconds (LES)
Severely errored seconds (SES) Unavailable errored seconds (UAS)
Bipolar violation (BPV) Controlled slip (CS) Line code violation
(LCV)Alarms, errors, andeventsRelatedDocumentationM320 PIC
Description on page 3 High Availability Features on page 4 M320 PIC
Combination Limitations on page 15 M320 PICs Supported on page
5Copyright 2013, Juniper Networks, Inc. 46M320 Multiservice Edge
Router Interface Module ReferenceChannelized E1/T1 Enhanced IQ(IQE)
PIC (M320Router)g004432 Junos OS Release 9.5 and later (Type 1)For
information on which FPCs support this PIC, see
M320PIC/FPCCompatibility on page 15.Software release Ten E1 or T1
ports DS1 and E1 interfaces are selectable on a per-port
granularity E1 channelization per PIC: 10 E1 channels 310 DS0
channels T1 channelization per PIC: 10 T1 channels 240 DS0 channels
Power requirement: 0.52 A @48 V (24.73 W) Model number:
PB-10CHE1-T1-IQE-RJ48Description Top row: 0 and 1 fromleft to right
Second row: 2 and 3 fromleft to right Third row: 3 and 4 fromleft
to right Bottomrow: 5 and 6 fromleft to rightHardware
featuresSoftware features Quality of service (QoS) per channel:
weighted round-robin (WRR), randomearly detection(RED), weighted
randomearly detection (WRED) Enhanced fine-grained queuing per
logical interface. See the Junos OS Class of Service Libraryfor
Routing Devices for more information about class of service
features. Support sending and receiving in-band loopback codes in
both framed and unframed mode: Framed in-band loopback at CSU
Framed in-band loopback at Smartjack (ANSI) Unframed in-band
loopback at CSU47 Copyright 2013, Juniper Networks, Inc.Channelized
E1/T1 Enhanced IQ(IQE) PIC (M320 Router) Unframed in-band loopback
at Smartjack (ANSI) You can configure the following framing modes
using the CLI: T1SF (D4/superframe), ESF (extended superframe)
E1G704, G704no-crc4, unframed Packet buffering, Layer 2 parsing
Local line, remote line, and remote payload loopback testing; each
channel can be loopedindividually and independently of other
channels (DS1/E1 channels) Simple Network Management Protocol
(SNMP): T1 MIB (RFC 1406) Dynamic, arbitrary channel configuration
Full bit error rate test (BERT) Clocking: internal andloop(clock
recoveredfromnetwork anduse for transmit). Internal timingis the
default for channelized T1 ports. The external master clock can be
a multiple of 2.048MHz or 1.544 MHz for E1 or T1 operation. Line
coding: T1CLI configurable as AMI or B8ZS E1HDB3 Encapsulations:
Circuit cross-connect (CCC) Translational cross-connect (TCC)
Extended Frame Relay for CCC and TCC Flexible Frame Relay Frame
Relay Frame Relay for CCC Frame Relay for TCC Frame Relay port CCC
High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC
framing for TCC MPLS CCC MPLS TCC Point-to-Point Protocol (PPP) PPP
for CCC PPP for TCC Encapsulations available only for DS0 and DS1:
Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink Frame
Relay (MLFR) UNI NNI (MFR FRF.16) Multilink PPP (MLPPP)
Encapsulations available only for DS1: PPP over Frame Relay
120-ohmRJ-48C connector (female) Cables and connectorsCopyright
2013, Juniper Networks, Inc. 48M320 Multiservice Edge Router
Interface Module ReferenceOne tricolor per port: OffNot enabled
GreenOnline with no alarms or failures YellowOnline with alarms for
remote failures RedActive with a local alarm; router has detected a
failureLEDs DS1 alarms: Alarmindication signal (AIS) Loss of frame
(LOF) Remote alarmindication signal (RAIS) 24-hour alarmreporting
history maintained for error statistics and failure counts,
15-minuteintervals on all errors DS1 error detection: Bursty
errored seconds (BES) CRC errors Errored seconds (ES) Line errored
seconds (LES) Loss of framing seconds (LOFS) Loss of signal seconds
(LOSS) Severely errored seconds (SES) Severely errored framing
seconds (SEFS) Unavailable seconds (UAS)Alarms, errors, andevents
Layer 2 per-queue and per-channel packet and byte counters Layer 2
per-queue and per-channel packet and byte drop
countersInstrumentation(counters)RelatedDocumentationM320 PIC
Description on page 3 High Availability Features on page 4 M320 PIC
Combination Limitations on page 15 M320 PICs Supported on page 549
Copyright 2013, Juniper Networks, Inc.Channelized E1/T1 Enhanced
IQ(IQE) PIC (M320 Router)Channelized OC3 IQPIC (M320Router) Junos
OS Release 7.1 and later (Type 1)For information on which FPCs
support this PIC, see M320PIC/FPCCompatibility on page 15.Software
release One OC3 port Power requirement: 0.39 A @48 V (18.6 W)
Fine-grained queuing per logical interface Channelization: DS3,
DS1, DS0 Model number: PB-1CHOC3-SMIR-QPPDescription Subrate and
scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN
Verilink Packet buffering, Layer 2 parsing M13/C-bit parity
encoding DS3 far-end alarmand control (FEAC) channel support Local
and remote loopback testingHardware featuresCopyright 2013, Juniper
Networks, Inc. 50M320 Multiservice Edge Router Interface Module
Reference Quality of service (QoS) per channel: weighted
round-robin (WRR), randomearly detection(RED), weighted randomearly
detection (WRED) Simple Network Management Protocol (SNMP): OC3
MIB, DS3 MIB, T1 MIB Dynamic, arbitrary channel configuration Full
bit error rate test (BERT) Encapsulations: Circuit cross-connect
(CCC) Translational cross-connect (TCC) Frame Relay High-Level Data
Link Control (HDLC) Point-to-Point Protocol (PPP)Software features
Duplex SC/PC connector (Rx and Tx); single-mode fiber
intermediate-reach fiber SONET/SDH OC3/STM1 fiber-optic SFPs:
Multimode (model number: SFP-OC3-SR) Intermediate reach (IR-1)
(model number: SFP-OC3-IR) Long reach (IR-1) (model number:
SFP-OC3-LR)Optical interface specificationssee SONET/SDH OC3/STM1
Optical Interface SpecificationsCables and connectorsOne tricolor
per port: OffNot enabled GreenOnline with no alarms or failures
YellowOnline with alarms for remote failures RedActive with a local
alarm; router has detected a failureLEDs51 Copyright 2013, Juniper
Networks, Inc.Channelized OC3 IQPIC (M320 Router)Alarms:
Alarmindication signalline (AIS-L) Alarmindication signalpath
(AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate
signal fail (BERR-SF) Idle code, idle received Loss of frame (LOF)
Loss of pointer (LOP-P) Loss of signal (LOS) Out of frame (OOF)
Payload mismatch (PLM-P) Payload unequipped (unequipped STS at path
level) (UNEQ-P) Parity bit (P-bit) disagreements Path parity error
Remote defect indicationline (RDI-L) Remote defect indicationpath
(RDI-P) Yellowalarmbit (X-bit) disagreementsError detection: Bit
interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) Errored
seconds (ES-S, ES-L, ES-P) Far-endbit errors, remote error
indicationline (REI-L), far-endline coding violations (CV-LFE)
Far-endbit errors, remoteerror indicationpath(REI-P),
far-endpathcodingviolations(CV-PFE) Far-end block error (FEBE)
Far-end errored seconds (ES-LFE, ES-PFE) Far-end severely errored
seconds (SES-LFE, SES-PFE) Far-end unavailable seconds (UAS-LFE,
UAS-PFE) Frame error Severely errored frames (SEF) Severely errored
framing seconds (SEFS-S) Severely errored seconds (SES-S, SES-L,
SES-P) Unavailable seconds (UAS-L, UAS-P)Alarms, errors,
andeventsRelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15 M320 PICs Supported on page 5Copyright 2013, Juniper
Networks, Inc. 52M320 Multiservice Edge Router Interface Module
ReferenceChannelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP
(M320Router) Junos OS Release 9.3 and later (Type 1)For information
on which FPCs support this PIC, see M320PIC/FPCCompatibility on
page 15.Software release Two OC3 or STM1 ports SONET or SDH is
configurable on a per-port granularity Channelization: OC3, DS3,
DS1, DS0, E3, E1 SONET channelization: 2 OC3 channels 6 DS3
channels 168 DS1 channels 1011 DS0 channels SDH channelization: 2
STM1 channels (non-concatenated) 6 E3 channels 126 E1 channels 6
DS3 channels (Junos OS Release 10.1 and later) 168 DS1 channels
(Junos OS Release 10.1 and later) 1011 DS0 channels Power
requirement: 0.56 A @48 V (27.1 W) Model number:
PB-2CHOC3-STM1-IQE-SFPDescription Ports are numbered 0 and 1
fromleft to right Hardware features53 Copyright 2013, Juniper
Networks, Inc.Channelized OC3/STM1 Enhanced IQ(IQE) PIC with SFP
(M320 Router) Dynamic, arbitrary channel configuration Quality of
service (QoS) per channel: weighted round-robin (WRR), randomearly
detection(RED), weighted randomearly detection (WRED)
Enhancedfine-grainedqueuingper logical interface. SeetheJunos Class
of ServiceConfigurationGuide for more information about class of
service features. Subrate and scrambling: Digital Link/Quick Eagle
Kentrox Larscom ADTRAN Verilink Packet buffering, Layer 2 parsing
M13/C-bit parity encoding DS3 far-end alarmand control (FEAC)
channel support Local line, remote line, and remote payload
loopback testing Simple Network Management Protocol (SNMP): OC3
MIB, DS3 MIB, T1 MIB Full bit error rate test (BERT)
Encapsulations: Circuit cross-connect (CCC) Translational
cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible
Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC
Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC
framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink
Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol
(PPP) PPP for CCC PPP for TCC Encapsulations available only for
DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink PPP
(MLPPP) PPP over Frame RelaySoftware features Duplex LC/PC
connector (Rx and Tx) SONET/SDH OC3/STM1 fiber-optic SFPs:
Multimode (model number: SFP-OC3-SR) Intermediate reach (IR-1)
(model number: SFP-OC3-IR) Long reach (IR-1) (model number:
SFP-OC3-LR)Optical interface specificationssee SONET/SDH OC3/STM1
Optical Interface SpecificationsCables and connectorsCopyright
2013, Juniper Networks, Inc. 54M320 Multiservice Edge Router
Interface Module ReferenceOne tricolor Status LED per port: OffNot
enabled. GreenOnline with no alarms or failures. YellowOnline with
alarms for remote failures. RedActive with a local alarm; router
has detected a failure.LEDsAlarms, errors, andevents SONET alarms:
Alarmindication signalline (AIS-L) Alarmindication signalpath
(AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal
fail (BERR-SF) Loss of frame (LOF) Loss of light (LOL) Loss of
pointer (LOP) Loss of signal (LOS) Payload label mismatch (PLM-P)
Remote defect indicationline (RDI-L) Remote defect indicationpath
(RDI-P) Remote error indication (REI) Payload unequipped
(unequipped STS at path level) (UNEQ-P) Virtual
containeralarmindication signal (VAIS) Virtual containerloss of
pointer (VLOP) Virtual containermismatch (VMIS) Virtual
containerremote defect indication (VRD1) Virtual
containerunequipped (VUNEQ) SDH alarms: Administrative unit
alarmindication signal (AU-AIS) Bit error rate signal degrade
(BERR-SD) Bit error rate signal fail (BERR-SF) Bit interleaved
parity (BIP) error B1, B2, B3 Higher order pathalarmindication
signal (HP-AIS) Higher order pathfar-end receive failure (HP-FERF)
Higher order pathpayload label mismatch (HP-PLM) Higher order
pathloss of pointer (HP-LOP) Higher order pathremote defect
indication (HP-RDI) Higher order pathunequipped (HP-UNEQ) Loss of
frame (LOF) Loss of light (LOL) Loss of signal (LOS) Multiplex
sectionalarmindication signal (MS-AIS) Multiplex sectionfar-end
receive failure (MS-FERF) Multiplex sectionremote defect indication
(MS-RDI) Multiplex sectionremote error indication (MS-REI) Phase
lock loop (PLL) Remote error indication (REI) Severely errored
frames (SEF)55 Copyright 2013, Juniper Networks, Inc.Channelized
OC3/STM1 Enhanced IQ(IQE) PIC with SFP (M320 Router) Tributary
unitalarmindication signal (TU-AIS) Tributary unitloss of clock
(TU-LOC) Tributary unitloss of pointer (TU-LOP) Tributary
unitmismatch (TU-MIS) Tributary unitremote defect indication
(TU-RD1) Tributary unitunequipped (TU-UNEQ) DS1 alarms:
Alarmindication signal (AIS) Loss of frame (LOF) Remote
alarmindication signal (RAIS) DS1 error detection: Bursty errored
seconds (BES) CRC errors Errored seconds (ES) Line errored seconds
(LES) Loss of framing seconds (LOFS) Loss of signal seconds (LOS)
Severely errored seconds (SES) Severely errored framing seconds
(SEFS) Unavailable seconds (UAS) DS3 alarms: Alarmindication signal
(AIS) Loss of frame (LOF) Loss of signal (LOS) Yellowalarm DS3
error detection: C-bit code violations (CCV) C-bit errored seconds
(CES) C-bit severely errored framing seconds (CEFS) CRC errors
Excessive zeros (EXZ) Far-end block error (FEBE) Far-end receive
failure (FERF) Line errored seconds (LES) Parity bit (P-bit) code
violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity
bit (P-bit) severely errored framing seconds (PSES) Severely
errored framing seconds (SEFS) Unavailable seconds
(UAS)RelatedDocumentationM320 PIC Description on page 3 High
Availability Features on page 4 M320 PIC Combination Limitations on
page 15Copyright 2013, Juniper Networks, Inc. 56M320 Multiservice
Edge Router Interface Module Reference M320 PICs Supported on page
557 Copyright 2013, Juniper Networks, Inc.Channelized OC3/STM1
Enhanced IQ(IQE) PIC with SFP (M320 Router)Channelized OC12/STM4
Enhanced IQ(IQE) PIC with SFP (M320Router)Figure 4: 4-Port IQE
PICg004426Figure 3: 1-Port IQE PIC 1-port: Junos OS Release 9.3 and
later (Type 1) 4-port: Junos OS Release 9.4 and later (Type 2)For
informationonwhichFPCs support these PICs, see
M320PIC/FPCCompatibility onpage 15.Software releaseDescription One
or four OC12/STM4 ports SONET or SDH is configurable on a per-port
granularity SONET channelization (1-port PIC): 1 OC12 channel 4 OC3
channels 12 DS3 channels 336 DS1 channels 1011 DS0 channels SDH
channelization (1-port PIC): 1 STM4 channel 4 STM1 channels 12 E3
channels 252 E1 channels 12 DS3 channels (Junos OS Release 10.1 and
later) 336 DS1 channels (Junos OS Release 10.1 and later) 1011 DS0
channels SONET channelization (4-port PIC): 4 OC12 channel 16 OC3
channelsCopyright 2013, Juniper Networks, Inc. 58M320 Multiservice
Edge Router Interface Module Reference 48 DS3 channels 672 DS1
channels 974 DS0 channels SDH channelization (4-port PIC): 4 STM4
channel 16 STM1 channels 48 E3 channels 504 E1 channels 48 DS3
channels (Junos OS Release 10.1 and later) 672 DS1 channels (Junos
OS Release 10.1 and later) 974 DS0 channels Power requirement:
1-port: 0.64 A @48 V (30.7 W) 4-port: 1.08 A @48V (52 W) Model
number for 1-Port IQE PIC: PB-1CHOC12-STM4-IQE-SFPModel number for
4-Port IQE PIC: PB-4CHOC12-STM4-IQE-SFP 1-port: Port is numbered 0.
4-port: Ports are numbered: Top row: 2 and 0 fromleft to right
Bottomrow: 3 and 1 fromleft to rightHardware featuresSoftware
features Quality of service (QoS) per channel: weighted round-robin
(WRR), randomearly detection(RED), weighted randomearly detection
(WRED) Enhanced fine-grained queuing per logical interface. See the
Junos OS Class of Service Libraryfor Routing Devices for more
information about class of service features. Subrate and
scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN
Verilink Packet buffering, Layer 2 parsing M13/C-bit parity
encoding DS3 far-end alarmand control (FEAC) channel support Local
line, remote line, and remote payload loopback testing Simple
Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
Dynamic, arbitrary channel configuration Full bit error rate test
(BERT) Encapsulations: Circuit cross-connect (CCC) Translational
cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible
Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC59
Copyright 2013, Juniper Networks, Inc.Channelized OC12/STM4
Enhanced IQ(IQE) PIC with SFP (M320 Router) Frame Relay port CCC
High-Level Data Link Control (HDLC) HDLC framing for CCC HDLC
framing for TCC MPLS CCC MPLS TCC Multilink Frame Relay (MLFR) UNI
NNI (MFR FRF.16) Point-to-Point Protocol (PPP) PPP for CCC PPP for
TCC Encapsulations available only for DS1: Multilink Frame Relay
end-to-end (MLFR FRF.15) Multilink PPP (MLPPP) PPP over Frame Relay
Duplex LC/PC connector (Rx and Tx); single-mode fiber SONET/SDH
OC12/STM4 fiber-optic SFP transceivers: Short reach (model number:
SFP-OC12-SR) Intermediate reach (IR-1) (model number: SFP-OC12-IR)
Long reach (LR-1) (model number: SFP-OC12-LR)Optical interface
specificationssee SONET/SDH OC12/STM4 Optical Interface
SpecificationsCables and connectorsOne tricolor per port: OffNot
enabled GreenOnline with no alarms or failures YellowOnline with
alarms for remote failures RedActive with a local alarm; router has
detected a failureLEDsAlarms, errors, andevents SONET alarms:
Alarmindication signalline (AIS-L) Alarmindication signalpath
(AIS-P) Bit error ratesignal degrade (BERR-SD) Bit error ratesignal
fail (BERR-SF) Loss of frame (LOF) Loss of light (LOL) Loss of
pointer (LOP) Loss of signal (LOS) Payload label mismatch (PLM-P)
Remote defect indicationline (RDI-L) Remote defect indicationpath
(RDI-P) Remote error indication (REI) Payload unequipped
(unequipped STS at path level) (UNEQ-P) Virtual
containeralarmindication signal (VAIS) Virtual containerloss of
pointer (VLOP) Virtual containermismatch (VMIS) Virtual
containerremote defect indication (VRD1)Copyright 2013, Juniper
Networks, Inc. 60M320 Multiservice Edge Router Interface Module
Reference Virtual containerunequipped (VUNEQ) SDH alarms:
Administrative unit alarmindication signal (AU-AIS) Bit error
ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF)
Bit interleaved parity (BIP) error B1, B2, B3 Higher order
pathalarmindication signal (HP-AIS) Higher order pathfar-end
receive failure (HP-FERF) Higher order pathpayload label mismatch
(HP-PLM) Higher order pathloss of pointer (HP-LOP) Higher order
pathremote defect indication (HP-RDI) Higher order pathunequipped
(HP-UNEQ) Loss of frame (LOF) Loss of light (LOL) Loss of signal
(LOS) Multiplex sectionalarmindication signal (MS-AIS) Multiplex
sectionfar-end receive failure (MS-FERF) Multiplex sectionremote
defect indication (MS-RDI) Multiplex sectionremote error indication
(MS-REI) Phase lock loop (PLL) Remote error indication (REI)
Severely errored frame (SEF) Tributary unitalarmindication signal
(TU-AIS) Tributary unitloss of pointer (TU-LOP) Tributary
unitmismatch (TU-MIS) Tributary unitremote defect indication
(TU-RD1) Tributary unitunequipped (TU-UNEQ) DS1 alarms:
Alarmindication signal (AIS) Loss of frame (LOF) Remote
alarmindication signal (RAIS) DS1 error detection: Bursty errored
seconds (BES) CRC errors Errored seconds (ES) Line errored seconds
(LES) Loss of framing seconds (LOFS) Severely errored seconds (SES)
Severely errored framing seconds (SEFS) Unavailable seconds (UAS)
DS3 alarms: Alarmindication signal (AIS) Loss of frame (LOF)
Yellowalarm61 Copyright 2013, Juniper Networks, Inc.Channelized
OC12/STM4 Enhanced IQ(IQE) PIC with SFP (M320 Router) DS3 error
detection: C-bit code violations (CCV) C-bit errored seconds (CES)
C-bit severely errored framing seconds (CEFS) CRC errors Excessive
zeros (EXZ) Far-end block error (FEBE) Far-end receive failure
(FERF) Line errored seconds (LES) Parity bit (P-bit) code
violations (PCV) Parity bit (P-bit) errored seconds (PES) Parity
bit (P-bit) severely errored framing seconds (PSES) Severely
errored framing seconds (SEFS) Unavailable seconds (UAS) Layer 2
per-queue and per-channel packet and byte counters
Instrumentation(counters)Table 16: PICs Supported in Fourth Slot of
M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs on M320RoutersPIC
Model Number PIC NamePB-2GE-SFP Gigabit Ethernet, 2-port
SFPPB-4GE-SFP Gigabit Ethernet, 4-port SFPPB-2GE-SFP-QPP Gigabit
Ethernet IQ, 2-port SFPPB-4OC12-SON-MM SONET/SDH OC12c/STM4, 4-port
with multimode transceiversinstalledPB-4OC12SON-SMIR SONET/SDH
OC12c/STM4, 4-port with single-mode intermediatereach transceivers
installedPB-1OC48SON-SFP SONET/SDH OC48/STM16, 1-port SFPPB-TUNNEL
Tunnel ServicesRelatedDocumentationM320 PIC Description on page 3
High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 5Copyright 2013,
Juniper Networks, Inc. 62M320 Multiservice Edge Router Interface
Module ReferenceChannelized OC48/STM16 Enhanced IQ(IQE) PIC with
SFP (M320Router) Junos OS Release 9.4 and later (Type 2)For
information on which FPCs support this PIC, see
M320PIC/FPCCompatibility on page 15.Software release One OC48/STM16
port SONET or SDH is configurable on a per-port granularity SONET
channelization: 4 OC12 channels 16 OC3 channels 48 DS3 channels 672
DS1 channels 975 DS0 channels SDH channelization: 4 STM4 channels
16 STM1 channels 48 E3 channels 504 E1 channels 48 DS3 channels 672
DS1 channels 975 DS0 channels Power requirement: 1.10 A @48V (53 W)
Model number: PB-1CHOC48-STM16-IQE-SFPDescription Port is numbered
0. Hardware features63 Copyright 2013, Juniper Networks,
Inc.Channelized OC48/STM16 Enhanced IQ(IQE) PIC with SFP (M320
Router) Quality of service (QoS) per channel: weighted round-robin
(WRR), randomearly detection(RED), weighted randomearly detection
(WRED) Enhanced fine-grained queuing per logical interface. See the
Junos OS Class of Service Libraryfor Routing Devices for more
information about class of service features. Subrate and
scrambling: Digital Link/Quick Eagle Kentrox Larscom ADTRAN
Verilink Packet buffering, Layer 2 parsing M13/C-bit parity
encoding DS3 far-end alarmand control (FEAC) channel support Local
line, remote line, and remote payload loopback testing Simple
Network Management Protocol (SNMP): OC12, OC3 MIB, DS3 MIB, T1 MIB
Dynamic, arbitrary channel configuration Full bit error rate test
(BERT) Encapsulations: Circuit cross-connect (CCC) Translational
cross-connect (TCC) Extended Frame Relay for CCC and TCC Flexible
Frame Relay Frame Relay Frame Relay for CCC Frame Relay for TCC
Frame Relay port CCC High-Level Data Link Control (HDLC) HDLC
framing for CCC HDLC framing for TCC MPLS CCC MPLS TCC Multilink
Frame Relay (MLFR) UNI NNI (MFR FRF.16) Point-to-Point Protocol
(PPP) PPP for CCC PPP for TCC Encapsulations available only for
DS1: Multilink Frame Relay end-to-end (MLFR FRF.15) Multilink PPP
(MLPPP) PPP over Frame RelaySoftware features Duplex LC connector
(Rx and Tx); single-mode fiber SONET/SDH OC48/STM16 fiber-optic SFP
transceivers: Short reach (SR-1) (model number: SFP-1OC48-SR)
Intermediate reach (IR-1) (model number: SFP-1OC48-IR) Long reach
(LR-1) (model number: SFP-1OC48-LR)Optical
interfacespecificationsseeSONET/SDHOC48/STM16Optical
InterfaceSpecificationsCables and connectorsCopyright 2013, Juniper
Networks, Inc. 64M320 Multiservice Edge Router Interface Module
ReferenceOne tricolor per port: OffNot enabled GreenOnline with no
alarms or failures YellowOnline with alarms for remote failures
RedActive with a local alarm; router has detected a
failureLEDsAlarms, errors, andevents SONET alarms: Alarmindication
signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error
ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF)
Loss of frame (LOF) Loss of light (LOL) Loss of pointer (LOP) Loss
of signal (LOS) Payload label mismatch (PLM-P) Remote defect
indicationline (RDI-L) Remote defect indicationpath (RDI-P) Remote
error indication (REI) Payload unequipped (unequipped STS at path
level) (UNEQ-P) Virtual containeralarmindication signal (VAIS)
Virtual containerloss of pointer (VLOP) Virtual containermismatch
(VMIS) Virtual containerremote defect indication (VRD1) Virtual
containerunequipped (VUNEQ) SDH alarms: Administrative unit
alarmindication signal (AU-AIS) Bit error ratesignal degrade
(BERR-SD) Bit error ratesignal fail (BERR-SF) Bit interleaved
parity (BIP) error B1, B2, B3 Higher order pathalarmindication
signal (HP-AIS) Higher order pathfar-end receive failure (HP-FERF)
Higher order pathpayload label mismatch (HP-PLM) Higher order
pathloss of pointer (HP-LOP) Higher order pathremote defect
indication (HP-RDI) Higher order pathunequipped (HP-UNEQ) Loss of
frame (LOF) Loss of light (LOL) Loss of signal (LOS) Multiplex
sectionalarmindication signal (MS-AIS) Multiplex sectionfar-end
receive failure (MS-FERF) Multiplex sectionremote defect indication
(MS-RDI) Multiplex sectionremote error indication (MS-REI) Phase
lock loop (PLL) Remote error indication (REI) Severely errored
frame (SEF) Tributary unitalarmindication signal (TU-AIS)65
Copyright 2013, Juniper Networks, Inc.Channelized OC48/STM16
Enhanced IQ(IQE) PIC with SFP (M320 Router) Tributary unitloss of
pointer (TU-LOP) Tributary unitmismatch (TU-MIS) Tributary
unitremote defect indication (TU-RD1) Tributary unitunequipped
(TU-UNEQ) DS1 alarms: Alarmindication signal (AIS) Loss of frame
(LOF) Remote alarmindication signal (RAIS) DS1 error detection:
Bursty errored seconds (BES) CRC errors Errored seconds (ES) Line
errored seconds (LES) Loss of framing seconds (LOFS) Severely
errored seconds (SES) Severely errored framing seconds (SEFS)
Unavailable seconds (UAS) DS3 alarms: Alarmindication signal (AIS)
Loss of frame (LOF) Yellowalarm DS3 error detection: C-bit code
violations (CCV) C-bit errored seconds (CES) C-bit severely errored
framing seconds (CEFS) CRC errors Excessive zeros (EXZ) Far-end
block error (FEBE) Far-end receive failure (FERF) Line errored
seconds (LES) Parity bit (P-bit) code violations (PCV) Parity bit
(P-bit) errored seconds (PES) Parity bit (P-bit) severely errored
framing seconds (PSES) Severely errored framing seconds (SEFS)
Unavailable seconds (UAS) Layer 2 per-queue and per-channel packet
and byte counters Instrumentation(counters)Table 17: PICs Supported
in Fourth Slot of M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs
on M320RoutersPIC Model Number PIC NamePB-2GE-SFP Gigabit Ethernet,
2-port SFPPB-4GE-SFP Gigabit Ethernet, 4-port SFPCopyright 2013,
Juniper Networks, Inc. 66M320 Multiservice Edge Router Interface
Module ReferenceTable 17: PICs Supported in Fourth Slot of
M320-FPC2-E2 and M320-FPC2-E3 with Type 2 IQEPICs on M320Routers
(continued)PIC Model Number PIC NamePB-2GE-SFP-QPP Gigabit Ethernet
IQ, 2-port SFPPB-4OC12-SON-MM SONET/SDH OC12c/STM4, 4-port with
multimode transceiversinstalledPB-4OC12-SON-SMIR SONET/SDH
OC12c/STM4, 4-port with single-mode intermediatereach transceivers
installedPB-1OC48SON-SFP SONET/SDH OC48/STM16, 1-port SFPPB-TUNNEL
Tunnel ServicesRelatedDocumentationM320 PIC Description on page 3
High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 567 Copyright
2013, Juniper Networks, Inc.Channelized OC48/STM16 Enhanced IQ(IQE)
PIC with SFP (M320 Router)Channelized STM1 IQPIC (M320Router) Junos
OS Release 6.2 and later (Type 1)For information on which FPCs
support this PIC, see M320PIC/FPCCompatibility on page 15.Software
release One STM1 port Power requirement: 0.39 A @48 V (18.6 W)
Fine-grained queuing per logical interface Channelization: STM1c,
fractional E1, framed and unframed DS0 Model number:
PB-1CHSTM1-SMIR-QPPDescription Packet buffering, Layer 2 parsing
Local and remote loopback testingHardware features Quality of
service (QoS) per channel: weighted round-robin (WRR), randomearly
detection(RED), weighted randomearly detection (WRED) SNMP:
SONET/SDH MIB, T1/E1 MIB Dynamic, arbitrary channel configuration
Full bit error rate test (BERT) patterns at E1 and DS0 levels
Encapsulations: High-Level Data Link Control (HDLC) Frame Relay
Circuit cross-connect (CCC) Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)Software features Duplex SC/PC
connector (Rx and Tx); single-mode intermediate-reach fiber Cables
and connectorsOne tricolor per port: OffNot enabled GreenOnline
with no alarms or failures YellowOnline with alarms for remote
failures RedActive with a local alarm; router has detected a
failureLEDsCopyright 2013, Juniper Networks, Inc. 68M320
Multiservice Edge Router Interface Module Reference Alarmindication
signalline (AIS-L) Alarmindication signalpath (AIS-P) Bit error
ratesignal degrade (BERR-SD) Bit error ratesignal fail (BERR-SF)
Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) Loss of
frame (LOF) Loss of pointer (LOP-P) Loss of signal (LOS) Payload
mismatch (PLM-P) Payload unequipped (unequipped STS at path level)
(UNEQ-P) Remote defect indicationline (RDI-L) Remote defect
indicationpath (RDI-P)Error detection: Errored seconds (ES-S, ES-L,
ES-P) Far-endbit errors, remote error indicationline (REI-L),
far-endline coding violations (CV-LFE) Far-endbit errors,
remoteerror indicationpath(REI-P),
far-endpathcodingviolations(CV-PFE) Far-end errored seconds
(ES-LFE, ES-PFE) Far-end severely errored seconds (SES-LFE,
SES-PFE) Far-end unavailable seconds (UAS-LFE, UAS-PFE) Severely
errored frames (SEF) Severely errored framing seconds (SEFS-S)
Severely errored seconds (SES-S, SES-L, SES-P) Unavailable seconds
(UAS-L, UAS-P)Alarms, errors, andevents Layer 2 per-queue and
per-channel packet and byte counters
Instrumentation(counters)RelatedDocumentationM320 PIC Description
on page 3 High Availability Features on page 4 M320 PIC Combination
Limitations on page 15 M320 PICs Supported on page 569 Copyright
2013, Juniper Networks, Inc.Channelized STM1 IQPIC (M320
Router)Channelized T1 IQPIC (M320Router)Software release Junos OS
Release 7.4 and later (Type 1)For information on which FPCs support
this PIC, see M320PIC/FPCCompatibility on page 15. Ten T1 ports
Power requirement: 0.15 A @48 V (7.2 W) Fine-grained queuing per
logical interface Channelization: T1, FT1, NxDS0 Model number:
PB-10CHST1-RJ48-QPPDescriptionCopyright 2013, Juniper Networks,
Inc. 70M320 Multiservice Edge Router Interface Module Reference
Data service unit (DSU) and channel service unit (CSU)
functionality Ports configurable as clear channel T1 interfaces
with 1.544-Mbps connectivity Framing: Superframe (SF or D4) and
Extended Superframe (ESF) Supports B8ZS (bipolar 8-zero
substitution) and AMI (alternate mark inversion) line coding Local,
remote, and payload loopback testing ANSI T1.403 loopback support:
Respondstoembeddedloopbackcommandsuponreceipt of
anFDLcommandfromremoteend with loopup and loopdown at both line and
payload level Insertion of loopback commands enables remote
CSU/NIU/Smartjack to enter loopbackand loopdown at both the line
and payload level (ANSI and Telcordia) Inband loopback support:
Responds to inband loopback commands at both the line and payload
level (ANSI andTelcordia) Insertion of inband loopback commands at
both the line and payload level (ANSI andTelcordia) Clocking
support of external (line) and internal Buildout support of the
following ranges: 0 through 132 (Line buildout is from1 through 132
feet) 133 through 265 (Line buildout is from133 through 265 feet)
266 through 398 (Line buildout is from266 through 398 feet) 399
through 531 (Line buildout is from399 through 531 feet) 532 through
655 (Line buildout is from532 through 655 feet)Hardware features
Quality of service (QoS) per channel: weighted round-robin (WRR),
randomearly detection(RED), weighted randomearly detection (WRED)
SNMP: T1 MIB and DS0 MIB Dynamic, arbitrary channel configuration
Full bit error rate test (BERT) patterns at T1 and DS0 levels
Encapsulations: High-Level Data Link Control (HDLC) Frame Relay
Circuit cross-connect (CCC) Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)Software features 120-ohmRJ-48C
connector (female) Cables and connectorsOne tricolor per port:
OffNot enabled GreenOnline with no alarms or failures YellowOnline
with alarms for remote failures RedActive with a local alarm;
router has detected a failureLEDs71 Copyright 2013, Juniper
Networks, Inc.Channelized T1 IQPIC (M320 Router)Alarms:
Alarmindic