Aster building solutions_brochure

‘Inspire’‘Innovate’‘Succeed’

About Aster Building Solutions

Aster building solutions Private Limited (ABSPL)

ABSPL

ABSPL

ABSPL

is subsidiary of Aster Teleservices Private Limited

which is well known brand for its quality products and services offered in the field of Telecom, Power

and Broadcasting sector since 1998 and has set very high standards in this field. specializes in

Pre-Engineered Metal Building Systems from Design to Erection through Planning, Engineering,

Fabrication and Supply. Design and Detailing work is carried out by a highly skilled Engineering team

having rich experience and expertise exclusively in metal buildings using fully optimized techniques,

keeping up the quality and having excellent Computer Aided Design and Drafting facilities using the

Indian & International design Standards & Specifications of PEB.

started its journey in India having state of the art manufacturing facility plant of about 25,000

sq. m spread in 138,360 sq. m of land near Hyderabad in Andhra Pradesh with initial annual capacity

of 50,000 MT. The Company plans to enhance the production capacity to 100 MMTPA with

manufacturing facilities at Vadodara and Raipur along with Hyderabad. with full fledged

infrastructure facilities strives for excellence in providing cost effective and efficient Design &

Engineering with 100% accuracy and zero error towards utmost satisfaction of customer.

•

•

•

•

•

•

To provide services to our Customers in time and adapt to their changing needs.

Be a quality conscious value supplier of products, solutions and services.

Empower the employees.

Be an equal opportunity employer and provide all employees with a platform for

Growth and Leadership.

Maintain high standards of Corporate Governance.

Constantly strive to enhance shareholder value.

Mission

•

•

•

•

•

Commitment to Customers, Employees and Shareholders

Ethical Behavior

Respect for every individual

Aversion for waste

Lead by example

Values

“Achieve Performance Excellence And Create Standards”

We will strive to perform for our customers (both internal and external) in a manner that exceeds

customer expectations. We will deliver products, solutions and services that are optimum to meet

customer requirements. We will achieve performance excellence in all endeavours.

Vision

Aster implements a rigid quality management system architecture based on Asters mission and

corporate values. This architecture encompasses a wide range of mature and robust systems and

processes, and enables Aster to provide responsive support to customers.

Quality Management System

We offer reliable customer service as well as technical support from our own engineering team. We

make customized design as per specific needs of different customers indicating the different items of the

building, so that the customer can satisfy themselves before further proceeding with purchase order.

Our end product is warranteed as per specification commitments.

What we offer from Aster…..

Reliability

All our components are manufactured to the tolerances according to the Metal Building Manufacturers

Association. From the welds on our I-Beams to our long lasting paint finishes, we only allow the best

parts to leave the factory doors because we know that our products represent our company.

Quality

At ASTER, we Plan, Design, Engineer, and Detail the Pre-Engineered Buildings. Our Design range

covers all types of buildings from airplane hangars to multi story structures, Factory to Residential

Buildings, Warehouses to Shopping Malls.

Expertise

At ASTER we know that satisfied customers are the corner-stone of our success. Our goal is your

satisfaction.

Our philosophy

1.R

igid F

rame

2.V

ertical Fascia

3.R

oll up D

oor

4.B

racing

5.C

oncrete Floo

r

6.D

ow

n Sp

out

7.In

dustrial Fin T

ype lou

ver

8.E

ave Gutter

9.T

urb

o Vent

10.R

oof Jack

11.R

oof Mo

nitor

12.

Ro

of Cu

rb

13.

Rid

ge V

ent

14.

Sk

y L

ight P

anels

15.

Ro

of & W

all Pan

els

16.

Rak

e Trim

17.

Can

opy

18.

Sliding

Do

or

19.

Z-P

urlin

/Girt

20.

Po

st and B

eam at E

ndwall

21.

Alum

inum

Glass W

indo

w

1

14

13

11

01

9

12

02

21

19

17

16

18

4

5

2

8

76

3

15

Details of P

EB

A Pre-Engineered Building system is a building structure that consists of pre-engineered, pre-fabricated building

components that are combined together and assembled structurally, so that all components work together as one “system”.

Pre-Engineered Buildings can be as unique as customer's needs. A Computer-Assisted Design helps create a building for a

specific use, whether it's a Commercial or Residential use. They feature a structural steel framework of primary and

secondary members (rigid frame, purlins and girts) on to which cladding and roofing components are attached.

Suitable thermal insulation can be provided where an environmental conditioning is required.

The complete building is engineered to facilitate easy production and faster assembly on site.

Pre Engineered Steel Buildings

Office Buildings Commercial & Recreation CentresIndustrial Buildings & Warehouses

Architectural BuildingsShowrooms Railway Stations

Advantages of ASTER PEB: •

•

•

•

•

•

Economical

Aesthetic Appeal

Pleasing Colors

Faster Completion

Free from Construction Deficiencies

Strength & Durability

Seismic Resistance

Assured Quality

Modular Expansion

Environmental Resistance

Maintenance Free

Easy Relocation

•

•

•

•

•

•

Applications

Primary MembersMoment resisting frames provides lateral stability and transfers the roof and wall loads to the foundations

through anchor bolts. All Built-up Numbers Conforming to A 570/572 of Grade z.

Span : 6 to 90* m

Height : 3 to 15 m

Slope : 1 ' to 33 ' min

Bay : up to 9 m

Span : 24 to 180* m

Height : 3 to 15 m

Slope : 1 ' to 33 ' min

Bay : up to 9 m

Span : 6 to 50* m

Height : 3 to 12 m

Bay : up to 9 m

Span : 18 to 200 m

Height : 3 to 12 m

Slope : 1 ' to 33 ' min

Bay : up to 9 m

Span : 18 to 90* m

Height : 3 to 12 m

Slope : 1 ' to 33 ' min

Bay : up to 9 m

Span : 6 to 50* m

Height : 3 to 12 m

Slope : 1 ' to 33 ' min

Bay : up to 9 m

Span : 3 to 15* m Span : 4-6* m

Height : 3 to 12 m Height : 3 m

Slope : 1 ' to 33 ' min Slope : 1 ' to 33 ' min

Sample Cases - CLEAR SPAN OPTIONS (CS):

Sample Cases - MULTI SPAN FRAMES (MS):

Sample Cases - CURVED RAFTERS FRAMES (CR):

Sample Cases - MULTI GABLE FRAMES (MG):

Sample Cases - HIGH BAY-LOW BAY(CS):

Sample Cases - SINGLE SLOPE (SS):

LEAN TO: T-CANOPY :

*Span may change based on customer’s requirement

Created by Aster's professional engineers to meet your exact needs, our custom-designed framing systems

provide exceptional flexibility and optimum performance. Available in a wide variety of shapes, sizes and

layouts to suit virtually any building requirement, our framing systems are engineered to fit accurately for

efficient, economical construction.

Aster Building Framing Systems: Professionally Engineered

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 180 m

WIDTH MODULE WIDTH MODULE

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 90 m

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 200 m

WIDTH MODULE WIDTH MODULE

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 90 m

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 50 m

BUILDING WIDTH

MAX. PRACTICAL WIDTH = 50 m

LEAN TO

MAX. PRACTICAL WIDTH = 15 m

T - CANOPY

MAX. PRACTICAL WIDTH = 4-6 m

Roof and Wall Panels

Roof /Wall panels are manufactured out of high strength steel

grade with minimum tensile strength of 550 MPa

The steel base is coated with Zinc-aluminum alloy with minimum 2

Az150 (150 g/m coating mass) as per ASTM A792.

Color coated Galvalume confirming to ASTM specification has

specifically formulated paint system for external roofing and wall

cladding application to give aesthetical appearance for long

lasting color for much longer time than any other conventional

paint system.

The paint system is designed to resist chalking and fading. The

painting will be baked enamel polyester or silicon polyester with a

film thickness of 1.0 mil, the reverse side shall be white with 0.5

mil film thickness

The Aster panels shall have 30 mm deep major ribs, which taper in

width from 20 mm to 60 mm, and are spaced 250 mm on center.

Between two major ribs is additional minor stiffening ribs spaced

at 46 mm on center, Each panel shall provide one meter coverage.

Secondary Members

‘ Z ’ AND ‘ C ’ - COLD FORMED SECTIONS

Purlin, Girt and Eavestruts shall be cold formed from steel which has minimum

yields strength of 345 MPa (50,000 psi) and will confirm to the physical

specifications of ASTM A-570 (Grade 50) or equivalent.

1. Purlins and Girts shall be roll formed Z sections, 120-300 mm

deep with 50-100 mm flanges. Each flange shall have a 16 mm

stiffening lip formed at 45° to the flange with a thickness

of 1.5 to 2.5 mm.

2. C-channels are 100-300 mm deep roll formed with 50-100 mm

flanges

All other miscellaneous secondary members shall have a minimum yield 2

strength of 240 MPa/mC - Section

Z - Section

Surfmist Burnt Almond Headland

BeigeCottage GreenPale Eucalypt

Torres BlueSky Blue

Color Chart

Color shades are for color matching only.

250 mm

30 mm

1000 mm

60 mm

20 mm

46 mm

Building Accessories

Hardware Sealants & Foam Closures Ridge Vents Roof Curb

Roof Jack Sliding Door Sky Lights

Walk Door Window Adjustable Louver Fixed Louver

Building Additions:

Fascia :

Custom & Standard Canopies :

Insulation:

•

•

•

A fascia is typically used for aesthetic purposes. The fascia will

hide the slope of the roof and conceal any other roof accessories. It also

creates an exceptional area for signage, making the building a much more

attractive commercial structure.

Canopies provide a covering for

windows, walkways, doors, and MORE! They are appealing to the eye and

make your metal building unique. Contrasting colors can be used as well

to provide an impressive appearance. These canopies can be designed in

many shapes, sizes and colors to satisfy any customer's demands.

The temperature inside the metal buildings change with the

change in climatic conditions. They are also susceptible to condensation.

Insulation will reverse these effects by acting as a barrier and hence

maintaining the temperature at the desired level, thus preventing

condensation.

The Manufacturing ability to exceed expectations.

At ASTER, every single structural steel component of our building system is manufactured in-house

using technology that is second-to-none in the industry. This fully integrated manufacturing process

allows management to monitor every step of production while our commitment to state-of-the-art

equipment reduces costs and improves quality. Adequate manufacturing facility exists to meet the

requirement of the customer now and in future.

By combining the best technology and the best manufacturing practices under one roof, ASTER creates

structures that exceed both building requirements and our clients' expectations.

Built up lines, PHI

Samco Purlin Roll former

CNC Proarc Slitting & Cut to length Machine

Samco Workhouse-roll forming

Shearing Machine

Curved Rafter Building

Clear Span with L-To Building

High Bay - Low Bay Building

Multi Span Building

Projects Handled & Capabilities

WHEN IT'S TIME TO BUILD, BUILD WITH THE RELIABILTY OF ASTER

ASTER uses superior designs, state-of-the-art manufacturing capabilities and unparalleled expertise

to build the highest quality steel buildings worldwide.

Clear Span Building

Clear Span with T Shape Building

Clear Span with Curved Eaves Building

rd# A-8, 3 Floor, Aishwarya Chambers,Rukminipuri Colony, A.S. Rao Nagar, Hyderabad-500 062, India.

Tel: +91 (0) 40 2716 2621, Fax: +91 (0) 40 2716 2631 e-Mail: website: [email protected] www.asterbuildings.com

CORPORATE OFFICE

thE-67, 4 Crescent, Sainikpuri, Hyderabad-500 094, India.Tel : +91 (0) 40 2711 1199 Fax : +91 (0) 40 2711 0535

REGISTERED OFFICE

Aster Building Solutions Private Limited