ASSIGNMENT RADIO FREQUENCY ( RF) Design Coupled Line Band pass Filter (edge coupled) NAME MATRIC NUMBER SARAVANAN A/L SUKUMARAN B071210044 MOHD RAFFI BIN JALIL B071210304 ABD HARITH BIN ABD HALIM B071210210 MUHAMMAD AKMAL BIN ZOHIZAM B071210167 NOORADILA BINTI ZAINE B071210240 MASHASSILA BINTI MD ALI B071210011 Prepared for : Pn. ELIYANA BINTI RUSLAN
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ASSIGNMENT RADIO FREQUENCY ( RF)
Design Coupled Line Band pass Filter (edge coupled)
NAME MATRIC NUMBER
SARAVANAN A/L SUKUMARAN B071210044
MOHD RAFFI BIN JALIL B071210304
ABD HARITH BIN ABD HALIM B071210210
MUHAMMAD AKMAL BIN ZOHIZAM B071210167
NOORADILA BINTI ZAINE B071210240
MASHASSILA BINTI MD ALI B071210011
Prepared for : Pn. ELIYANA BINTI RUSLAN
INTRODUCTION
• Band pass filter allows frequencies between two cut-off frequencies while attenuating frequencies outside the cut-off frequencies.
• The Butterworth filter is a type of signal processing filter designed to have as flat a frequency response as possible in the passband.
• Known as a maximally flat magnitude filter
OBJECTIVE• To design, simulate, and fabricate edge coupled filter in microstrip
technology.
• To determine the comparison between measured and simulated results in regarding to microstrip technology.
• To calculate the values of admittance intervals, even and odd mode characteristics impedance.
• To design the circuit using the software called Advanced Design System (ADS).
• To acquire the knowledge on the process of fabrication can be divided into five main processes.
LITERATURE REVIEW
Attenuation versus normalized frequency for maximally flat filter prototypes.
Element value for maximally flat low pass filter prototypes.