April 24 - 27, 2007 The Effect of Temperature on the Uptake Rates of a New PDMS-Based Permeation Passive Sampler for VOCs in Air Suresh Seethapathy, Tadeusz Górecki Monika Partyka, Bożena Zabiegała, Jacek Namieśnik Department of Chemistry, University of Waterloo, Waterloo, ON, Canada. Department of Analytical Chemistry, Gdańsk University of Technology, Gdańsk, Poland 7th Passive Sampling Workshop and Symposium Virginia, United States
21
Embed
April 24 - 27, 2007 The Effect of Temperature on the Uptake Rates of a New PDMS-Based Permeation Passive Sampler for VOCs in Air Suresh Seethapathy, Tadeusz.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
April 24 - 27, 2007
The Effect of Temperature on the Uptake Rates of a New PDMS-Based Permeation Passive Sampler for
VOCs in Air
Suresh Seethapathy, Tadeusz Górecki
Monika Partyka, Bożena Zabiegała, Jacek Namieśnik
Department of Chemistry, University of Waterloo, Waterloo, ON, Canada.
Department of Analytical Chemistry, Gdańsk University of Technology, Gdańsk, Poland
7th Passive Sampling Workshop and SymposiumVirginia, United States
2
Concentration Profiles for the Two Types of Passive Samplers
Sample environment Sorbent
Diffusion barrier
Distance
Con
cent
ratio
n
Permeation samplers
Diffusion samplers
Membrane thickness
Sample environment
Distance
Con
cent
ratio
n
Sorbent
3
Comparison of Diffusion and Permeation Passive Samplers
• Diffusion samplers– sampling rate can be estimated based on the properties
of the analyte
– sensitive to moisture, air currents, temperature variations
• Permeation samplers– effective moisture elimination, much less sensitive to
air currents and temperature changes
– must be calibrated for each analyte
Permeation passive sampling – permeation through a membrane
Diffusive passive sampling – diffusion through air
4
Calibration Constant / Uptake rate
M = Amount of analyte collected by sorbent
D = Diffusion coefficient
A = Area of membrane
Cma = Concentration of the analyte on the membrane surface in contact with air
Cms = Concentration of the analyte on the membrane surface in contact with the sorbent
t = Time of sampling
Lm = Membrane thickness
msmam
CCL
AD
t
M
sorbentPDMS membrane
CmsCmaCo
Con
cent
ratio
n
5
M = Amount of analyte collected by sorbent
D = Diffusion coefficient
A = Area of membrane
Cma = Concentration of the analyte on the membrane surface in contact with air.
Cms = Concentration of the analyte on the membrane surface in contact with the sorbent
t = Time of sampling
Lm = Membrane thickness
K = Partition coefficient of the analyte between air and the membrane
P = Permeability constant of the polymer towards the analyte
Co = Concentration of the analyte in air
k = Calibration Constant (time/volume)
k-1 = Uptake rate (volume/time)
t
kMC 0
Theory
msmam
CCL
AD
t
M
oma KCC
PA
Lk m
0CL
ADK
t
M
m
6
Properties of PDMS
• Individual segmental motions even at –127 OC !!!
• Nearly constant diffusion coefficient for most VOCs
• Relative permeabilities are primarily decided by partition coefficients
• Temperature effects on permeability
increase in temperature results in
- decreased partition coefficient
- increased diffusivity
op
o
RTRTEPP
11exp
P = Đ K
7
p d sE E H Energy of Activation of permeation
Energy of activation of diffusion
Heat of solution
For PDMS, towards most volatile organic compounds
ΔHs < 0
Ed > 0
8
op
o
RTRTEPP
11exp
o
ppo
RT
E
RT
EPP lnln
PA
Lk m lnlnln
1ln ln ln p pm
oo
E ELk P
A RT R T
PA
Lk m
slope
Effect of Temperature on the Calibration Constant
9
Passive Sampler Design
PDMS
membrane
Disposable 1.8 mL crimp-top vial based
permeation passive sampler
Area of PDMS membrane exposed: 38 mm2
1.8 mL crimp
top vial
Al cap
Turned upside down before use
10
1. Remove septum from crimp cap
2. Cut PDMS membrane
3. Add sorbent to the vial
4. Assemble membrane and cap
5. Crimp to seal 6. Attach support/turn upside down for sampling
Aluminum crimp cap
cut membrane
Cutting tool
Teflon lined
septum
sorbent
vial
PDMS membrane
Sampler Preparation
11
Analyte extraction/analysis
7. De-crimp cap, add desorption solvent
8. Crimp with aluminum crimp cap/teflon lined
septum and shake
9. Introduce into GC auto sampler – either directly or after transferring the
extract into a different vial
12
Design of a Reusable Passive Sampler
Aluminumcrimp cap
PDMS membrane
Mouth portion of a screw top vial
Mouth portion of a crimp top vial
Plastic screw cap
Area of PDMS membrane exposed: 38 mm2
Reusable, 1.8 mL crimp-top vial-based permeation passive sampler
13
Brass ferrule
PTFE PlugNeat liquid
PTFE tube
Experimental Setup
Laboratory made permeation tubea
aProf. Jacek Namieśnik, Technical University of Gdańsk, Private communication.
Air Purifier
Flow controller
Standard gas mixture generator
Thermostatedexposure chamber
Activated carbon sampling tube
High pressure N2
source
Flow controller and monitor
Suction Pump
Vent
stirrer
14
Effect of Temperature on the Calibration Constant
• Experiments were conducted over a temperature range of 285 to 312.5 K