Android C200 Manual

User Manual

Car Entertainment & Navigation System

4.4 BluetoothSupport: HFP, HSP, A2DP, AVRCP and other applications, with CVC echo cancellation.

1. How to Connect a Bluetooth Device

Initial connection, use the phone to scan the bluetooth devices, enter the pairing code (0000) to connect. When have connection records, open the bluetooth in the effective range, it will connect automatically. After connect successfully, will show the bluetooth sign in the top right of the status bar.

2. How to Enter Bluetooth Applications

Touch the Bluetooth icon (in main interface or in all applications interface) or press the panel BT key to enter Bluetooth interface [As shown in Picture 4.4-1]

- HOME, Missed Calls, Received Calls, Outgoing Calls, Dial Pad, Phone Book.

Bluetooth music: Touch this icon to enter the bluetooth music [As shown in Picture 4.4-2].

Open the phone music player, can use the machine to play mobile phone music, and you can select music both on the device or on your mobile phone to realize the operation of forward, play/pause, next. When it in the play/pause state, the icon does not change, and are displayed as

Android SeriesThe information of this manual is for reference, if any

parameters when the product continue to upgrade,

please take the actual product as the standard. Please

forgive us for some small errors of printing and

translation. We will not notice you the change of contents

due to the technology improvement.

The Table of Content

01

01

01

02

04

06

06

09

09

11

13

16

19

19

20

21

27

27

1. Introduction of Product 1.1 User Interface

1.2 Key Features

2. Notice before Installation

3. Panel Keys

4. Function Operation 4.1 Main Interface

4.2 Navigation

4.3 Radio

4.4 Bluetooth

4.5 Multimedia

4.6 DVD

4.7 EQ

4.8 Browser

4.9 Steering Wheel Control

4.10 System Setting

4.11 Compass

4.12 Task Manager

4.13 File Manager

4.14 AUX IN

4.15 Front Camera

4.16 DVR (if applicable)

4.17 TV (if applicable)

4.18 Apk Installer

5. Troubleshooting

6. Product Specification

Thank you for choosing this Android Car Entertainment & Navigation System!

In order to use the device in the correct way, please read all contents carefully! We list out the operation for all functions of the car entertainment navigation system in it, so that you can facilitate the process easier. With it, you can obtain information about product introduction and function operation, and make sure the operation is more convenience.

The display pictures and contents in the manual may be a little different from the actual device when product continue to upgrade.

We will not notice you the update of specification or design due to the technology improvement.









High Performance: Cortex A9 Quad-Core processors, frequency 1.6GHz

Fast Response: RAM DDR III 1GB (2GB Optional)

High Capacity: Built-in Flash Memory 8GB (16GB Optional)

Operation System: Android 4.4.2 (with Unique User Interface)

Ultimate Entertainment with Multiple Apps Download

Internet Connect: Built-in with WiFi, support external 3G USB Dongle (WCDMA /EVDO /TD-SCDMA)

Digital TFT LCD Monitor, Capacitive Screen. Support 800*480 & 1024*600 resolution

Built in FM/AM Radio, Support RDS

Built in Bluetooth, Support Handsfree /A2DP /Phonebook /History Log

Built-in DVD or External DVD Box Optional

Support 720P and 1080P HD Video Play

With USB jack & SD Card Slot. Support USB 2.0 high/full/low-speed

1. Introduction of Product 1.1 User Interface

1.2 Key Features


3. Panel Keys

4. Function Operation 4.1 Main Interface

4.2 Navigation

4.3 Radio

4.4 Bluetooth

4.5 Multimedia

4.6 DVD

4.7 EQ

4.8 Browser

4.9 Steering Wheel Control

4.10 System Setting

4.11 Compass

4.12 Task Manager

1.1 User Interface

1.2 Key Features

4.13 File Manager

4.14 AUX IN

4.15 Front Camera

4.16 DVR (if applicable)

4.17 TV (if applicable)

4.18 Apk Installer

5. Troubleshooting

6. Product Specification

28

29

29

30

31

32

33

34

1.Introduction of Product

Introduction of Product









01

1. Do not disassemble, repair or change, we dont responsible for such operations caused the machine working abnormally.

2. Must exit the GPS navigation, then take out the GPS memory card, its out of our responsibility if user do not follow this step, caused the machine working abnormally

3. When install the device, please connect the machines ground wire with automotive metal parts (using screws to fix the ground wire on automotive metal parts), in order to enhance the stability of the machine and extend the life of the machine.

4. When system upgrade please dont cut off the power, to avoid upgrade failure caused by insufficient power supply.


Warning!

Please read carefully before use, and observe the listed instructions, to make sure the safety of long-term trouble-free use.

1. This machine uses automotive 12V power (must be grounded), please don't install it in those car or bus with 24V power system directly.

2. Please don't install it on the place which affects the driver's vision or operation.

3. Please use genuine CD, don't use non-standard and inferior disc, it may cause the machine to malfunction or affecting its life.

4. For driving safety, the driver is prohibited to watch program or operate the machine while driving, to avoid traffic accidents (except passengers watch through back monitors)

5. Without professional guidance, don't replace the power fuse yourself. Using improper fuse will cause machine damage or fire problem.

6. The machine consists of high-precision components, should avoid strong impact. Not to open the cover or adjust any part unauthorized, if you need maintenance please go to consult a professional service nearby.

7. Don't use fine-pointed or sharp hard substance to click the screen, in order to avoid scratches.

8. If the panel or TFT display is dirty, wipe with a soft cloth and a mild detergent; if you use a hard cloth, alcohol, or corrosive thinner to wipe, can cause panel damage or blurred screen, the text disappears and so on.

9. Please prevent placing the product in the humid environment and water, in order to avoid electric shock caused by short circuit, unnecessary damage and fire occurrence.

10. If in the excessive dust environment, please use head cleaning disc to clean bald, wash dish mouth groove often.

11. In order to prevent excessive battery discharge problem lead to can't start the car, the device has under voltage protection, such as the battery voltage is low or high to force shut down.

Tips:

1. Please read all above carefully before installation, and recommends installing this machine by car audio professional vendors.

2. To prevent accidents, before installing please keep in mind to turn off the car and break the ACC and B + connection.

3. Never insert small size disc, non-standard disc or foreign matter, otherwise it will damage the machine.

Important:

1. Android car entertainment navigation system is a completely open system. When intall third-party software and viruses or other reasons lead to crashes, system running abnormally and so on, don't belong to quality problem.

2. The machine provides ONE-KEY RECOVERY function (when the machine is

powered on, first press the power button for 4 seconds to power off, then press the power button again to turn on and off for 15 seconds, the system enters to one-key recovery mode) to restore the device to factory-setting, in case of some dysfunction cannot be resolved. Note: in this way, the documents, files, data and installed third-party applications will be all cleared.

3. Boot time, the system configuration of cold start boot is about 30 seconds. Turn off the engine and remove the key, after 30 seconds the system is completely shut down. Within 30 seconds to re-boot takes 2 to 3 seconds. After cold start, turn off the device to enter deep sleep mode, re-boot takes 2 to 3 seconds.

4. The machine support China Unicom, China Mobile, and China Telecom's 3G standard. Namely China Unicom WCDMA, China Telecom EVDO, China Mobile's TD-SCDMA.

5. The user can through 3G or WiFi Internet to download, or through SD card to install the third-party applications freely, but we dont guarantee third-party applications can be use completely on the machine, the user must identify and assess their own risk.

6. In the status of USB connecting with the the 3G network card (need to buy 3G USB dongle), turn on the engine and power the machine on, 3G network will connect automatically to normal within one minute. In the normal connection, the indicator light will be always on, and the 3G connection symbol is displayed at the right corner of top status bar.

Notice before Installation Notice before Installation

Support Original Car Can-bus & Car Steering Wheel Control

Multi Extension Functions: Support external DVR, Parking Camera, digital TV receiver (DVB-T2 / DVB-T mpeg4 / ISDB-T); Support OBDII, TPMS, Mirror Link etc.









0302

Please read carefully before use, and observe the listed instructions, to make sure the safety of long-term trouble-free use.

1. This machine uses automotive 12V power (must be grounded), please don't install it in those car or bus with 24V power system directly.

2. Please don't install it on the place which affects the driver's vision or operation.

3. Please use genuine CD, don't use non-standard and inferior disc, it may cause the machine to malfunction or affecting its life.

4. For driving safety, the driver is prohibited to watch program or operate the machine while driving, to avoid traffic accidents (except passengers watch through back monitors)

powered on, first press the power button for 4 seconds to power off, then press the power button again to turn on and off for 15 seconds, the system enters to one-key recovery mode) to restore the device to factory-setting, in case of some dysfunction cannot be resolved. Note: in this way, the documents, files, data and installed third-party applications will be all cleared.

3. Boot time, the system configuration of cold start boot is about 30 seconds. Turn off the engine and remove the key, after 30 seconds the system is completely shut down. Within 30 seconds to re-boot takes 2 to 3 seconds. After cold start, turn off the device to enter deep sleep mode, re-boot takes 2 to 3 seconds.

4. The machine support China Unicom, China Mobile, and China Telecom's 3G standard. Namely China Unicom WCDMA, China Telecom EVDO, China Mobile's TD-SCDMA.

5. The user can through 3G or WiFi Internet to download, or through SD card to install the third-party applications freely, but we dont guarantee third-party applications can be use completely on the machine, the user must identify and assess their own risk.

6. In the status of USB connecting with the the 3G network card (need to buy 3G USB dongle), turn on the engine and power the machine on, 3G network will connect automatically to normal within one minute. In the normal connection, the indicator light will be always on, and the 3G connection symbol is displayed at the right corner of top status bar.

3.Panel Keys

Panel Keys Panel Keys

POWER Key / Volume Adjust

Press the POWER key for 3 seconds to turn the device on or off.

When power on, short press the POWER key to mute or restore mute.

HOME Key / Frequency

Press the HOME key to return to the main interface or entered into all application interface. In radio mode, clockwise rotation can be achieved step backward search, counterclockwise rotation can be realized stepping forward search.

BACK Key

Press the BACK key to back to the previous interface.

MENU Key

Press the MENU key to pop out the operation menu in the bottom corner.

BAND Key

Click the BAND key to quickly start the radio application. In the radio mode, click it to achieve the function of FM1, FM2, FM3, AM1, AM2 cycle switching

SRC Key

Press the SRC key to quickly start the radio, music player, navigation, DVD etc.

NAVI Key

Press the NAVI key to start navigation, press it again to back to previous interface.

EJECT Key

Click the EJECT key to input or take out the disc.

PREVIOUS Key

In Music Player /Bluetooth Music /DVD play mode, click the PREVIOUS key to play the previous music /video. In radio mode, click the PREVIOUS button to start step forward search.

PLAY/PAUSE Key

In Music Player /Bluetooth Music /DVD Play mode, light press it to achieve play/pause.

NEXT Key

In Music Player /Bluetooth Music /DVD play mode, click the NEXT key to play the next music /video. In radio mode, click the NEXT button to start step backward search.

MUTE Key

Press the MUTE key to switch mute or non-mute. Long press the MUTE key, off-screen function can be achieved, click on screen or press any key to activate the screen.









04 05

4. Function Operation

Function Operation Function Operation

4.1 Main InterfaceWhen the unit is on, system will enter into main interface automatically. In other interface, press [HOME] key or HOME icon to get into the main interface [As shown in Picture 4.1-1 & Picture 4.1-2].

12 36

5

4

Status Bar: Displays the time, GPS positioning, the sign of 3G /WiFi /Bluetooth /Message etc.

Transparent Background: The background color of the top status bar is transparent, so you can get a full-screen view when watching movie. The big selling point is that almost all the background color of the operation bars are transparent or translucent, there is no dead angle for watching picture or movie even do some operation on the screen.

A. Put your finger at the left half side area of the top status bar and slide down, will show you the time & date [As shown in Picture 4.1-3]. It also works on other interface.

B. Put your finger at the right half side area of the top status bar and slide down, will display Setting, Day/Night View, WiFi, Airplane Mode [As shown in Picture 4.1-4]. It also works on other interface.

[Picture 4.1-3] [Picture 4.1-4]

[Picture 4.1-5]

Music Player Widget: Touch it to enter the music player interface.

Date & Time Widget: Touch it to enter the interface of date & time setting.

Application Icons: Touch any icon can enter into the corresponding application interface.

Icons Removable: All icons and widgets are removable here, you can drag the icon to any position any page you want, or remove it from the main interface (drag the icon to the middle top position when the words remove appears).

Page Symbol: Default are two pages, page will be added automatically when there is no space in the current page.

Floating HOME Icon: It appears in each interface acting as a [HOME] button. Short touch it, 5 optional icons appear in the center of screen [As shown in Picture 4.1-5].

A B

D E








C



06 07

4.2 NavigationSupport Navigation Software: Support High Germany /Baidu /Kay Rucker /Sogou; Support iGo /Sygic /Navitel /Google On-line map

Support: 3D navigation Virtual Map

Support: Real-time traffic

Support: Voice navigation

4.3 RadioTouch the RADIO icon on the main interface or on the all application interface, or directly press the panel BAND key, can enter into the radio mode[As shown in Picture 4.3-1].


[Picture 4.1-6]


Touch and hold the floating HOME icon, can drag it to anywhere you like. In other interface, quickly press it two times or long press for 3 seconds, can back to the main interface.

A. Return: Return to the previous interface (no effect when in the main interface already).

B. All Application: Touch it to enter the all application interface [As shown in Picture 4.1-6].

Floating HOME icon: Touch it, five options display in the center of the screen, followed by return, applications list, home, menu, recently used application icons as introduced in 4.1 main interface.

Forward Search: Short press this icon, go to forward frequency (FM frequency is -0.05, AM frequency is -9); Long press this icon, go to search previous strong signal station (click any icons that in the bottom to stop searching).

Preset Stations: Press any icon of P1-P6 for 3s, can store the current listening station in the icon. After storage, short press any of P1-P6, can play the station stored in the icon.

Page sliding can switch the wave bands between FM1, FM2, FM3, AM1, AM2.

Automatic Preview: In FM mode, touch this icon to preview automatically from FM1-P1 to FM3-P6, preview 10s in each station; In AM mode, preview automatically from AM1-P1 to AM2-P6, 10s in each station. Touch again to stop the preview and switch to play the current station. /Switch between digital radio and local radio: Touch this icon, can switch between local radio and digital radio.

Automatic Search: In FM mode, search strong signal stations automatically and store its FM frequency from FM1 to FM3, can store up to 3x6 stations; In AM mode, search strong signal stations automatically and store its AM frequency from AM1 to AM2, up to 2x6 stations. Touch again to stop searching.

FM/AMTouch this icon to switch wave band between FM1, FM2, FM3, AM1, AM2.







C. Home: Return to main interface.-

D. Menu: Touch this icon to enter the small menu interface to select wallpaper, widget and do system setting [As shown in Picture 4.1-7]. You can also enter this interface by pressing any empty position of the main interface for 3 seconds.

E. Recent Opened Application: Touch this icon to display all applications recently opened [As shown in Picture 4.1-8]. Slide the application window up or down, you can close the application.



08 09



Forward Search: Short press this icon, go to forward frequency (FM frequency is -0.05, AM frequency is -9); Long press this icon, go to search previous strong signal station (click any icons that in the bottom to stop searching).

Preset Stations: Press any icon of P1-P6 for 3s, can store the current listening station in the icon. After storage, short press any of P1-P6, can play the station stored in the icon.

Page sliding can switch the wave bands between FM1, FM2, FM3, AM1, AM2.

Automatic Preview: In FM mode, touch this icon to preview automatically from FM1-P1 to FM3-P6, preview 10s in each station; In AM mode, preview automatically from AM1-P1 to AM2-P6, 10s in each station. Touch again to stop the preview and switch to play the current station. /Switch between digital radio and local radio: Touch this icon, can switch between local radio and digital radio.

Automatic Search: In FM mode, search strong signal stations automatically and store its FM frequency from FM1 to FM3, can store up to 3x6 stations; In AM mode, search strong signal stations automatically and store its AM frequency from AM1 to AM2, up to 2x6 stations. Touch again to stop searching.

FM/AMTouch this icon to switch wave band between FM1, FM2, FM3, AM1, AM2.

RDS Function: Touch this icon to enter into RDS interface [As shown in Picture 4.3-2].

RDS is a special radio system developed by BBC company, which could only be used in Europe and HK. In mainland China, RDS is not available, so AF/TA/PTY are grayed and not touchable.

A. AF: AF table offers the information sent by the same or adjacent transmitter which receives the broadcast of the same program, the receiver stores this table in order to reduce the time of the search of alternative frequencies. (Needs to be supported by RDS function)

B. TA: TA is a switching signal, specializing in traffic announcement broadcasting status. When there is an emergency, the radio will automatically switch to the program which is broadcasting the traffic announcement according to the received signal. After the announcement finished, it will automatically get back the previous menu/function. (Needs to be supported by RDS function)

C. PTY: PTY is a type of program ID, along with the launch of a program, which category the broadcasting programs into the specified programs among the 31 such programs. Receiver Click ID to receive, record this type of program. (Needs to be supported by RDS function)

Backward search: Short press this icon, go to next frequency (FM frequency is +0.05, AM frequency is +9); Long press this icon, go to search next strong signal station (click any icons that in the bottom to stop searching).

Stereo: Touch this icon to select or cancel stereo status.

Remote /Proximity Switch: Touch this icon, switch to remote or proximity station search mode. If set it in proximity station search mode, it only receive local stations; in remote mode, it will receive local and remote stations.

Manually input a frequency [As shown in Picture 4.3-3]










10 11

4.5 Multimedia1. Supports Storage Devices / File TypeSupport maximum capacity: 64GBSupport storage device formats: FAT, NTFS formatSupport storage devices: C disk, SD card, GPS card, U diskSupport audio file formats: mp3, mp2, ogg, wav, AAC, AC3, amr, mpe, flacSupport picture file formats: JPEG, JPG, GIF, PNG, BMP, WBMP.Support video formats: avi, mkv, mov, mp4, mpeg, mpg, rmvb, trp, ts, vob, webm, f4v, flv, m2ts, asf, divx (1080P@30fps Full HD)

2. Music Player

Function OperationFunction Operation







Touch the Music Player icon (in main interface or in all applications interface) to enter the music player interface [As shown in Picture 4.5-1].

Incoming Call

When a phone call is coming, will automatically switch the source and pop up the Bluetooth interface.

Phone

During the phone call, you can hang (stop calling), switch (cancel Bluetooth hands-free, switching to mobile devices to answer), mute the microphone, turn on the numeric keypad via Bluetooth interface.

Update Contacts

Touch the HOME icon it will pop up five options, then press the MENU icon, you can choose to update contacts or clear data.

1 2 3

3




On the screen, it list out all music files in different storage devices including built-in flash memory and external SD card and USB stick. If too many songs, you can input a word in the search box to quickly find your favorite songs to play [As shown in Picture 4.5-2].

Touch the [] beside the search box, then enter to the interface [As shown in Picture 4.5-3].

Category: Display the list by category of playing, song, artist and album.

Sort: Sort the category by title, type, size and time.

Search: Enter a word of the name to do quick search.

Setting: Set to play all, play shuffle and shuffle all.

[Picture 4.5-1]

12 13








Slide up and down the file list, then touch the target song to play. With memory function the device can automatically play the last song directly [As shown in Picture 4.5-4].

Out of order play: Play the music among the current list out of order

Play mode: Touch this icon to switch between shuffle play, order cycle, single repeat.

Previous: Touch this icon to play the previous song.

Play/Pause: Touch this icon to play/pause.

Next: Touch this icon to play the next song.

Lyrics: Touch this icon to display lyrics or not.

Music list: Touch this icon to display the music list.


3. Video Player

Touch the Video Player icon (in main interface or in all applications interface) to enter the video player interface [As shown in Picture 4.5-5].




[Picture 4.5-4]

[Picture 4.5-5]


On the screen, it list out all video files in different storage devices including built-in flash memory and external SD card and USB stick. If too many videos, you can input a word in the search box to quickly find your favorite movie to play [As shown in Picture 4.5-6].

Display Mode: Switch to directory display (display the storage devices directly such as internal storage, SD_0, SD-1, USB-0, USB-1) and preview display (display the video files with preview picture).


Category: Display the list by category of MKV, MP$, WMV file types.

Touch the [] beside the search box, then enter to the interface [As shown in Picture 4.5-7].


Slide up and down the file list, then touch the target video to play. With memory function the device can automatically play the last video directly [As shown in Picture 4.5-8].

14 15

4.6 DVDTouch the DISC icon (in main interface or in all applications interface) or press the panel DVD key, can enter the DVD application.

Support Discs

Support 12cm disc type: VD-Video, DVDR/RW, DVD-ROM, CD-DA, CD-ROM, CD-R,CD-RW

Support audio formats: CD, MP3, WMA, WAV, AAC

Support picture formats: JPG

Support video formats: MPEG2, MPEG4, AVI, DIVX, DIV, ASF, VOB, WMV, MOV, RMVB

A. CD Disc

Insert the CD disc to enter CD play mode; If already has a CD in, just touch the DISC icon

B. DVD Disc

Insert the DVD disc to enter DVD play mode; If already has a disc in, just touch the DISC icon (in main interface or in all applications interface) or press the panel DVD key to play [As shown in Picture 4.6-2].


Mute: Touch this icon to switch mute or non-mute.

- The icon followed floating HOME icon, Previous, Play/Pause, Next.

Shuffle Play: Touch this icon to switch between the order of play and shuffle play.

Repeat Play: Touch this icon to switch between single repeat and order cycle.

EQ: Touch this icon to enter the sound settings interface, adjust the equalizer and balancer.

CD list of selections: Slide up and down the track list, change the display of track list. Touch the target track to play that track.








-: Icon in proper order is Aspect Ratio Switch, Previous, Play/Pause, Next, Video List.


Aspect Ratio switch: To set the video playback screen ratio.

[Picture 4.5-8]

(in main interface or in all applications interface) or press the panel DVD key to play [As shown in Picture 4.6-1].



Display Mode: Switch to directory display (display the storage devices directly such as internal storage, SD_0, SD-1, USB-0, USB-1) and preview display (display the video files with preview picture).


Category: Display the list by category of MKV, MP$, WMV file types.


Slide up and down the file list, then touch the target video to play. With memory function the device can automatically play the last video directly [As shown in Picture 4.5-8].

[Picture 4.6-2]

[Picture 4.6-1]

16 17

Previous: Short touch this icon to switch to rewind, continuous touch to switch between rewind x2, x4, x8, x16, x32, play. Long press it for 2 to 3 seconds, switch to play previous video.

Play/Pause: Touch this icon to play/pause

Next: Short touch this icon to switch to fast forward, continuous touch to switch between fast forward x2, x4, x8, x16, x32, play. Long press it for 2 to 3 seconds, switch to play next video.

Stop: Touch this icon to stop.

Menu: Touch this icon to pop-up menu options.

Next: Touch this icon to switch to the next menu bar. The menu bar is divided into 3 menu bars, it will switch order of cycle between the 3 pages.

4.8 BrowserWCDMA/EVDO/TD-SCDMA.

Support through 3G Dongle, WiFi and 3G phones hotpot to connect internet.

In WCDMA wireless data terminal and 3G mobile phone SIM card is properly connected status, touch the Browser icon (in main interface or in all applications interface) to enter into the browser interface [As shown in Picture 4.8-1].








In the second page of the menu bar, following icons:

Touch this icon, show execute up operation;

Touch this icon, show execute down operation;

Touch this icon, show execute left operation;

Touch this icon, show execute right operation;

Touch this icon, show execute OK operation;

Touch this icon, enter to the EQ interface.

Touch this icon, go to the next/third page.

In the third page of the menu bar, following icons:

Touch this icon, switch between the order of play and random play.

Touch this icon, switch between single cycle and list cycle.

Touch this icon, show the title of DVD disc.

Touch this icon, enlarge the image.

Touch this icon, switch subtitles.

Touch this icon, switch languages.

4.7 EQTouch the EQ icon (in main interface or in all applications interface) to enter the EQ interface [As shown in Picture 4.7-1 & Picture 4.7-2]

User can adjust the balancer and equalizer (as showed in the pictures) to get a better sound effect.

[Picture 4.7-1]

[Picture 4.7-2]



18 19

4.9 Steering Wheel ControlTouch the Steering Wheel Control icon to enter the steering wheel control interface [As shown in Picture 4.9-1].

4.10 System Setting

Enter the URL

Click on the URL bar, after you enter the URL in the pop-up keyboard click on the start icon to verify the connection to the Web site.

Text Input

Click in the text input area, enter text in the pop-up keyboard (short click on English icons on the bottom left keyboard, can switch to a Chinese input. Enter the Chinese pinyin, in the type list, select text that appears) and click on the go icon to confirm your entry. Short press the input area, you can select all, copy, paste, and select.


Language & Input

1. Language: select language in Chinese, English, Russian etc (over 40 kinds of languages).

2. Keyboard & Input Methods: Set the default input method; whether vibrate or play a tone while press a key, whether automatically capitalized, select input language, whether show recommendation words (input -enable Lenovo tips), whether open Auto-correction...

3. Text to Speech (TTS) Output: it contains the default engine settings(settings for Word speech synthesis engine), install the language data(the language that you want to install the speech synthesis data), PicoTTS settings

Touch the Settings icon to enter the setting interface. Including language & input, basic settings, display setting, network settings, advanced settings, device information etc.







Save button: Press it to save the setting of the steering wheel buttons.

Reset: Press it to clear the setting of the steering wheel buttons.

[Picture 4.9-1]

Steering Wheel Control Studying Way

Way 1: Firstly, click one of the original car steering wheel buttons, then click the related button on steering wheel control interface. In the red area, it will give you prompt if the study is successfully completed.

Way 2: Firstly, click one of the buttons on steering wheel control interface, then click the related button on original car steering wheel. After that, in the red area, will comes the prompt if the study is successfully completed.



20 21


Date & Time

1. Time Correction: Select to use the GPS calibration time while boot, or use network-provided time to correct the date, time, and time zone.

2. Time Setting: Can manually set the date, time, time zone, time format & date format.

Sound

1. Volumes: set the system default volume.

2. Default Notification Sound: set the system default beep.

3. Touch Sounds: can be checked, default is turn off.

4. Mute When Parking: can be checked, default is turn on.

5. Boot Default Volume: the user can customize the default boot volume.

6. GPS Mixing: can be checked, the default is not selected. If not selected, the navigation doesn't work with other non-Bluetooth phone remix.

7. GPS Mixing Ratio: If GPS remix is checked, users can set the remix proportion of the navigation and other non-Bluetooth phone.

Display

1. Brightness: set brightness of the screen.

2. Wallpaper: set the wallpaper (Live wallpaper, default wallpaper).

3. Big Light Detecting: the brightness of the screen automatically dims when open the headlights.

4. Video Play while Driving: traffic rules prohibit watching videos when diving, turn it off then can play video while driving.

WLAN / WiFi

Built-in WiFi, when in the WiFi environment, can connect with internet by selecting the right WiFi network.









22 23


Network

1 .Airplane Mode: can be checked, default is not checked.

2. Tethering & Portable Hotspot: set up WiFi hotspot.

3. Mobile Networks: mobile network setting.

4. Data Usage: check the data used in a period.

DLNA

After opening the WiFi/WLAN, then you can open DLNA to connect with external devices

General Settings

1. Any Key to Boot: select this, press any key to start the machine.

2. Automatically Answer Incoming Calls: after the association of the local Bluetooth device, a call comes in, you need to decide by your own whether answer or not.

3. Bluetooth Phone Book Auto DeleteBluetooth phone book automatically deleted when the mobile phone disconnected. Can be checked, the default is not selected.

4. Sort Radio by Frequency: When complete the automatically radio station search, the searched stations will be sorted according to the order of the signals strength. Can be checked, selected by default.

5. Set Default Navigation: user can manually add multiple navigation software which has been installed, then select one of them as the default navigation.

6. Panel Backlight: set the backlight color of the panel keys.

7. Factory settings: this option is valid only for the factory.

8. Factory Data Reset: this setting will erase all data on device

9. System Upgrade: not suggest user to do MCU update or system update unless under our technicians professional guidance.









Advanced Settings

1. Location: can use Google Location Service or GPS to determine your location, default is GPS.

24 25

4.11 CompassTouch the Neolite Compass icon to enter the compass interface [AS shown in Picture 4.11-1].

[Picture 4.11-1]

[Picture 4.12-1]

Touch the Task Manager icon to enter into the interface [As shown in Picture 4.12-1].

Task Manager App is designed to allow the system to run more smoothly and stably. Fast end the process which users do not want to use, release memory resources, and provide a better experience for the user.


2. Security: It contains device administrators, unknown sources (whether to allow installation of apps from unknown sources), trusted credentials, install from external storage device.

3. Applications: include system applications, running applications, external storage device's applications, downloaded applications.

4. Storage: Show the total capacity of all connected storage device (SD card, USB, etc.) and built-in Flash memory, and also the rest space. And can unload connected storage device on this interface.

About Device

Click About Device to display the device information, including legal information, model number, Android version, baseband version, kernel version, build number, MCU version, serial number and other information related equipment.









4.12 Task Manager

26 27


[Picture 4.14-1]

[Picture 4.15-1]

4.13 File ManagerTouch the File Manager icon to enter the File Manager interface [As shown in Picture 4.13-1]

The internal storage is disc C, if with external SD card or USB stick, will come with disc D/E

[Picture 4.13-1]

Refresh: Touch this icon to reload all the running processes.

Select All: Touch this icon to select all running processes, touch again to cancel selection.

Delete: Touch the Select All icon, then touch this icon to delete all running processes. Touch the delete icon in the right side of a single process, you can end the process.

4.14 AUX INUnder Auxiliary equipment's valid input state, click the AUX icon to enter the AUX interface [As shown in Picture 4.14-1].

It is for External audio and video signal inputs (eg. DTS, Player)

4.15 Front CameraTouch the Front Camera icon to enter the interface [As shown in Picutre 4.15-1].

The device support to connect with two cameras: Front Camera and Rearview Camera

28 29

4.16 DVR (if applicable)Touch the DVR icon to enter the DVR mode [As shown in Picture 4.16-1].

:Touch this icon for recording.

:Touch this icon to begin playback.

:Touch this icon to pause playback.

:Touch this icon to stop playback.

:Touch this icon to switch to the previous one.

:Touch this icon to switch to the next section.

:Touch this icon to switch toolbars [As shown in Picture 4.16-2].

:Touch this icon to display the menu bar.

:Touch this icon to switch up the contents of the menu bar.

:Touch this icon to switch down the contents of the menu bar.

:Touch this icon to determine the selection of content.

:Touch this icon to switch the contents of the menu bar to the left.

:Touch this icon to switch the contents of the menu bar to the right.

:Touch this icon to switch toolbars [As shown in Picture 4.16-1].

[Picture 4.16-1]

4.17 TV (if applicable)TV is optional function, not built-in the device. Touch the TV icon can enter the TV mode if you paid for adding TV function [As shown in Picture 4.17-1]. TV has two models, one is digital TV, another is analog TV.

:Touch this icon to switch to the previous one.

:Touch this icon to switch to the next station.

:Touch this icon to display the menu bar.

:Touch this icon to display the volume.

:Touch this icon to perform automatic station search.

:Touch this icon to display TITLE.

:Touch this icon to switch the toolbar [As shown in Picture 4.17-2].

[Picture 4.17-1] [Picture 4.17-2][Picture 4.16-2]

:Touch this icon to switch up the contents of the menu bar.

:Touch this icon to switch the contents of the menu bar down.

:Touch this icon to determine the selection of content.

:Touch this icon to switch the contents of the menu bar to the left.

:Touch this icon to switch the contents of the menu bar to the right.

:Touch this icon to exit.

:Touch this icon to switch the toolbar, [As shown in Picture 4.17-1].


30 31

4.18 Apk InstallerTouch the Apk Installer icon to enter the Apk Installer interface [As shown in Picture 4.18-1].

Touch the Install button in Picture 4.18-1, enter the software installation mode [As shown in Picture 4.18-2].



Touch the Manage button in Picture 4.18-1, enter the software management mode [As shown in Picture 4.18-3].

Touch any application in Picture 4.18-3, enter interface [As shown in Picture 4.18-4], can launch, export, uninstall and cancel the selected application.

Make sure all connections correct againCheck whether the fuse blown, replace it with the identical fuse

Press RESET key to restore to the factory settings

Check whether connected with the radio antenna, or connection loose. If so, connect the antenna and strong the connectionAntenna may not be set properly, check that the antenna is fully extended or broken, if the antenna is broken, replace the antennaBroadcast signal is too weak, change the stationAntenna didnt connect with ground, then connect it with ground.

Already has disc in.Small size disc is in (please DO NOT input small-size discs)

Disk is dirty, clean itThe disc format or disc video system is not compatible, change itDisk poor quality or damage, replace with a quality one

Check Bluetooth phone is paired and connected with the device correctly, refer to the mobile phone manual to pair it.

The voice is too loud, bring down the voice

The bluetooth phone is far away from the device, place the phone within 5 meters from the device.

Video file formats are various, we cant guarantee that the device supports all formats. And the device support maximum 64GB SD cards and USB flash drives.

The output current is not enough to drive mobile hard drives, unless the read mobile hard disk is powered singly.

Please check if the connection is loose

The video cable from main unit to the TV isnt connected properly

The audio cable is not properly connected, re-connect the cable.

Problem

No Power Supply

TFT Display Error or Buttons No Effect

Unable to Receive Radio Station

Poor Effect on Receiving a Station

Cant Input a Disc

Unable Play the Disc

No Sound

No Picture

Cant Use Bluetooth

Bluetooth Phone with Echo

Bluetooth Music or Phone Sound on and off

Cant Play Video from SD Card or USB Stick

Cant Read Hard Disk

Cant Play iTouch/iPod

Cause / Solution

Note: Please check Troubleshooting List carefully before sending the broken device back to repair. If the problem is out of list or still could not solve the problem, please feel freely to contact our professional after-sale team!

5Troubleshooting

Function Operation Troubleshooting

32 33

6.Product Specifications

GeneralPower Supply 12V (Allowable Range: 9V~16V)Working Current Max 15ASleep Current

Android C200 Manual

Documents