ANDI BUDIMAN ILJAS - PT Axis International ID

16

ANDI BUDIMAN ILJAS Associate Director Indonesia Qualifications Mechanical Engineering (S1) Graduate – ITB Bandung Australian Institute Of Chartered Loss Adjuster (AICLA) Indonesia Certified Adjusting Practitioner Course (ICAP) ANZIIF Certified Insurance Practitioner Associate of the ANZIIF Work Experiences 2020 - present PT Axis International Indonesia Associate Director 2018 – 2019 PT Prima Adjusterindo Mandiri Associate Director 2016 - 2017 PT Kuadra Inti Adjuster Technical Director 2012 - 2016 Charles Taylor – PT Radita Hutama Internusa Associate Director 2010 - 2012 PT Cunningham Lindsey Indonesia Operations Manager 2007 - 2010 PT McLarens Young Indonesia Operations Manager 1997 - 2007 PT McLarens Indonesia Loss Adjuster 1994 - 1997 PT Tripatra Engineers and Constructors Mechanical Engineer

17

Areas of Expertise

50 million USD involving loss of Coal-fired Boiler Power Plant Complex due to earthquake and tsunami. Lead Underwriters : PT Asuransi Sinar Mas 5 million USD involving loss of Combined-cycle power plant due to failure of disconnect circuit breaker from power network grid. Lead Underwriters : PT Asuransi Jasa Indonesia 13 million USD involving loss of Terex Highwall Machinery due to landslide in Kalimantan coal mining. Lead Underwriters : PT Asuransi Jasa Indonesia 9 million USD loss involving fire occurred at Sandal Manufacturing Factory. 3 stories building collapsed, causing further damage to stock and hundred sandal manufacturing machinery. Lead Underwriters : PT Asuransi MSIG Indonesia 6 million USD loss concerning GE Gas Turbine LM-6000PA Packaged by IHI Japan owned by PLN, government owned electrical power company. The incident was due to failure of main breaker being engaged from the main grid. Lead Underwriters : PT Asuransi Jasa Indonesia 1.5 million USD loss of Heat Recovery Boiler part of government owned fertilizer producer, PT. Pupuk Iskandar Muda. Lead Underwriters : PT Asuransi Jasa Indonesia 3 million USD loss concerning over-firing of a furnace part of the biggest PE manufacturer in Indonesia, PT. Chandra Asri. Lead Underwriters : PT Asuransi Astra Buana A total of 1 million USD loss concerning extruder breakdown part of PE manufacturer at Anyer, PT. Titan Petrokimia, previously owned Lead Underwriters : PT Asuransi Allianz Utama Indonesia Approximate of 5 million USD fire loss involving a close-packed plastic moulded manufacturer. Lead Underwriters : PT Asuransi QBE Indonesia Previously, Andi had also handled in tenths of losses at the Indonesian largest pulp and paper manufacturer, as well as various all risk and mechanical breakdown losses at power plant, mining industry, etc.

18

General Experiences

Andi started his professional employment soon after he graduated from the academic institution in 1993. He joined PT Tripatra Engineers and Constructors where he gained his first experience in engineering and field constructors, being involved in erection and construction of a large-scale Mobil Oil Indonesia, the oil and gas turn-key project. He mainly dealt with static and rotating mechanical equipment including large pressure vessels, heat exchangers, pumps, and gas turbines. He gained extensively hands-on experience in engineering equipment installation up to testing-commissioning stages.

He later switched to his loss adjusting experience when he joined one the international loss adjusting company in 1997, and leave this company in 2012 having reached management level being the Operations Manager. He then joined other international loss adjusting company, positioned again at Operations Manager until this May 2012.

From year 2012 to 2016, he joined PT Radita Hutama Internusa, a Charles Taylor company - being an Assistant Director, in assisting the Board of Directors of the company to develop a newly established Property, Casualty and Special Risk division, in addition to the previously well-known Marine Hull and Cargo Division.

Andi continued his operation and gaining more widened market experience with joining PT Kuadra Inti Adjuster, and then PT Prima Adjusterindo Mandiri, prior joining PT Axis International Indonesia.

During his service in loss adjusting profession, he had broadened his experience in handling many industrial mechanical breakdown losses, power plants breakdown, catastrophe losses, as well as other fire and perils claims, all risks claims, fidelity, liability, theft and couple of marine losses.

Up to present, he is continuing developing his loss adjusting skills and operations management.