Anchor Systems 2008

7/22/2019 Anchor Systems 2008

1/36Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au

Anchor systems.

High performance. Easy to install. Very versatile.

134


2/36

Chemical anchors Page

HVU adhesive anchor 138

HIT-HY 150 injection technique 141

HIT-RE 500 injection technique 142

HIT-HY 70 injection technique 143Components & accessories 144

Heavy duty mechanical anchors

HSL-3 heavy duty anchor 148

Safe rings 149

HDA design anchor 150

HSC safety anchor 152

Medium duty mechanical anchor

HUS-H/F concrete screw anchor 153

HSA stud anchor 154

HKD-S drop-in anchor 156

HLC sleeve anchor 157

HNI nail in anchor 158

Light duty mechanical anchor

HT frame anchor 159

HCA ceiling hanger 159

DBZ wedge anchor 159

HHD-S cavity anchor 160

HSP/HFP drywall anchor 160

HRD-U plastic anchor 161

HUD-1 universal anchor 163

HGN anchor 163

HLD plastic toggle anchor 163

HPS-1 impact anchor 164

IN/IDP insulation fastener 165

Accessories

Threaded rods, couplers, nuts 166

Software

Profis 169

EXBAR 169

HIT HCC-B Concrete connector 169

135

Anchor systems

Hilti. Outperform. Outlast. I T 131 292 I www.hilti.com.au


3/36136

Anchor systems


Safety Approved ProductsAs an international company, Hilti

has gained many approvals for its

products with high performance

loads, fire rating and corrosion

resistance.Low odour chemical anchors, foil

capsules, simple setting

procedures Hilti anchors are

designed with the user in mind and

offer outstanding performance with

comfort and practicality.

Productivity System SolutionsComplete and integrated systems

from drilling to fixing with settingequipment and accessories, ideal

for serial fastenings saving time

and money.

Innovation Faster, easier, more economicalOur technical teams constantly

strive to improve on our anchor

design. Foil packs not glass, a

jumbo cartridge dispenser with

dosage meter and friction - grip

setting tools all seek to drive

speed and efficiency.

Support Field Engineers located aroundAustralia for personalised fastening

design and technical support on-

site with the backup of international

experience and approvals.

One supplier who designs,

manufactures and delivers the

product with on-site consultancy,

technical backup and service.


4/36

The corrosion resistance required from ananchor will depend on the location of the

fixing and the surrounding environment.

To enable the designer to select an

appropriate fixing for the conditions, Hilti

produce several anchors in a choice of

materials, to suit a range of environments.

The usual basic coating for most Hilti

anchors is electro-galvanised (zinc plated)

to 5 mm. This coating gives some degree

of protection but is most suitable in dry,

indoor conditions.

Improved resistance can be provided by

Hot-dip galvanising or equivalent

mechanical processes. The Galvanised

Finish Symbol indicates that such a

superior coating is available.

All stainless steel anchors stocked by Hilti

(Aust) are of superior quality A4 (SS 316)

stainless steel. It offers significantly better

corrosion protection than A2 stainless

steels offered by some manufacturers.

Materials in the A4 group (stainless steel)

or those of a higher quality should be used

for fastenings exposed to a greater risk ofcorrosion, such as those in town air,

industrial atmosphere, coastal climate and

in road construction.

Corrosion & chemical attack

Fire resistance

When subject to high temperatures, as in

fire, the properties of both the anchor and

the surrounding base material are

degraded. In order to provide customerswith appropriate information for fixings

which are to be used in situations where

they cannot be protected from the

possibility of fire, Hilti carries out

independent fire tests to international

standards on a range of anchors.

These assessments and performance

ratings are available on request

through your local Hilti Field Engineer.

For normal requirements, stainless steelA4 grade has a high resistance to

corrosion. In chemically aggressive

environments even A4 has difficulty

maintaining its mechanical integrity.

Tunnels, indoor swimming pools, facilities

exposed to sea water, water treatment

plants and chemical/power plants would

all fit into this category. Hilti have

developed a range of anchor products so

that fastening solutions can be offered in

these corrosive environments.

The material, HCR, is a chromium-nickel

steel alloy with a high molybdenum

content. The HAS-HCR rods have similar

mechanical properties and performance

to the A4 HAS-R versions. Details are

given in the product information pages.

Hilti products accompanied with this

symbol are available in HCR.

Base Material

The wide variety of building materials

used today provide different anchoring

conditions for anchors. There is hardly a

base material in or to which a fasteningcannot be made with a Hilti product.

However, the properties of the base

material play a decisive role when

selecting a suitable fastener/anchor and

determining the load it can hold.

Hilti can supply anchors suitable for

fixing to concrete, hollow and solid

masonry, aerated concrete, lightweight

concrete, and drywall or plasterboard.

In addition a large variety of other base

materials (eg. stone) can be

encountered in practice. Generally

fastenings can be made to these

materials, but these cases should be

referred to a Hilti Field Engineer.

Technical

Support

Our entire sales team is highly trainedto provide technical advice on the Hilti

range of anchors. In addition we have a

dedicated team of Field Engineers,

operating nationwide who can provide

on-site technical support, fastening

design advice and service, technical

seminars and training support on

PROFIS Anchor & EXBAR rebar design

softwares.

Our team is dedicated to working

directly with our customers to ensure

the simplest, safest and most

economical fastening solutions.

GALV

GalvanisedFinish

A4316

CorrosionResistance

HCRhigh Mo

CorrosionResistance

137

Anchor systems



5/36138

Anchor systems

For assistance in anchor design contact your local Hi lt i Engineer or cal l 131 292


Features

Fire rated

Virtually odourless resin with a high flash point

Good wetting of concrete by the adhesive: high bond strength

Capsule contains graded quartz crystals that roughen core drilled holes

Can be used in dry or damp base material

No expansion force in base material

Good resistance to chemicals

Capsules wont drop out of overhead holes

Wide installation temperature range -5C to +40C

Components in capsule are in correct measured amounts that

ensures reliable mixing and no air pockets in hole

Quick curing

Tough, flexible capsule

HVU adhesive capsuleExternal thread version HAS, H AS-R Internal thread version HIS-N, H IS-RN

Item Ordering Hole Version Hole Hole Version Hole Package Price

no. designation depth of dia. depth of thread dia. contents per(mm) thread (mm) (mm) (mm) (mm) (mm)

256691 HVU M 8 x 80 80 HAS M 8 10 10 100256692 HVU M 10 x 90 90 HAS M 10 12 95 HIS-N M 8 14 10 100256693 HVU M 12 x 110 110 HAS M 12 14 115 HIS-N M 10 18 10 100256694 HVU M 16 x 125 125 HAS M 16 18 130 HIS-N M 12 22 10 100256695 HVU M 20 x 170 170 HAS M 20 24 175 HIS-N M 16 28 5 100256696 HVU M 24 x 210 210 HAS M 24 28 210 HIS-N M 20 32 5 100256698 HVU M 30 x 270 270 HAS M 30 35 4 100

256700 HVU M 36 x 330 330 HAS M 36 40 2 100

Storage temperature 5 to 25C

HVU bulk packI tem Ordering Package Price

no. designation contents per334743 HVU M12 bulk pack 300 100334744 HVU M16 bulk pack 300 100334745 HVU M20 bulk pack 150 100

HVU adhesive anchor,for concreteThe HVU adhesive anchor comprises a foil capsule and HAS threaded rod

or HIS-N internally threaded sleeve.

Applications

Heavy duty fastenings into concrete and hard stone Where dynamic loads are required

Suitable for small spacing and edge distances

Curing time

Base material temperature +20C +10C 0C 5C

Time between setting and loading 20 min. 30 min. 1 hour 5 hours

Technical data

For external thread HAS-E For internal thread HIS-N/HIS-RN

Hole Designation Hole Nrec Vrec Designation Hole Nrec Vrec Foil capsule sizedepth, threaded diameter, kN kN internally diameter, kN kN Designationh1 (mm) rod d1 (mm) fc,cyl=20MPa fc,cyl=20MPa threaded d1 (mm) fc,cyl=20MPa fc,cyl=20MPa HVU

80 HAS M8 10 7.8 5.6 HVU M8 x 80

90 HAS M10 12 11.8 9.0 HIS-N M8 14 8.7 6.3 HVU M10 x 90

110 HAS M12 14 17.0 13.1 HIS-N M10 18 13.8 9.9 HVU M12 x 110

125 HAS M16 18 24.8 24.7 HIS-N M12 22 20.1 14.5 HVU M16 x 125

170 HAS M20 24 44.9 38.6 HIS-N M16 28 37.4 26.9 HVU M20 x 170

210 HAS M24 28 64.7 55.6 HIS-N M20 32 58.6 42.0 HVU M24 x 210

270 HAS M30 35 104.0 142.4 HVU M30 x 270

330 HAS M36 40 145.2 208.2 HVU M36 x 330

Nrec = Recommended working load in tension Vrec = Recommended working load in shear fc,cyl=20MPa concrete

Available on request subject to lead time.

For stainless steel, please contact your local Hilti Engineer or call 131 292


6/36139

Anchor systems



HAS-E anchor rod, completewith hexagon nut & washer

External end drive for quickerinstallation.

Item Ordering Anchor Hole Hole Max Fasten. Tighten. Package Price

no. designation length dia. Depth Thickness Torque contents per(Nm)

Steel (Grade 5.8 - 500 MPa) zinc plated to min. 5 microns332219 HAS-E M8 x 80/14 106mm 10mm 80mm 14mm 15 20 100332220 HAS-E M10 x 90/21 125mm 12mm 90mm 21mm 30 20 100332221 HAS-E M12 x 110/28 153mm 14mm 110mm 28mm 50 20 100332222 HAS-E M16 x 125/38 182mm 18mm 125mm 38mm 100 20 100332223 HAS-E M20 x 170/48 240mm 24mm 170mm 48mm 160 10 100332224 HAS-E M24 x 210/54 290mm 28mm 210mm 54mm 240 10 100

Steel (Grade 5.8, - 500 MPa) hot dipped galvanised to min. 40 microns333143 HAS-E-F M8 x 80/14 106mm 10mm 80mm 14mm 15 20 100333145 HAS-E-F M10 x 90/21 125mm 12mm 90mm 21mm 30 20 100333148 HAS-E-F M12 x 110/28 153mm 14mm 110mm 28mm 50 20 100333153 HAS-E-F M16 x 125/38 182mm 18mm 125mm 38mm 100 20 100333158 HAS-E-F M20 x 170/48 240mm 24mm 170mm 48mm 160 10 100333163 HAS-E-F M24 x 210/54 290mm 28mm 210mm 54mm 240 10 100

333165 HAS-E-F M30 x 270/70 (grade 8.8) 380mm 35mm 270mm 70mm 300 4 100333167 HAS-E-F M36 x 330/90 (grade 8.8) 460mm 40mm 330mm 90mm 1500 2 100

Stainless steel (316 grade, 700 MPa)333119 HAS-E-R M8 x 80/14 106mm 10mm 80mm 14mm 15 20 100333122 HAS-E-R M10 x 90/21 125mm 12mm 90mm 21mm 30 20 100333126 HAS-E-R M12 x 110/28 153mm 14mm 110mm 28mm 50 20 100333131 HAS-E-R M16 x 125/38 182mm 18mm 125mm 38mm 100 20 100333135 HAS-E-R M20 x 170/48 240mm 24mm 170mm 48mm 160 10 100333137 HAS-E-R M24 x 210/54 290mm 28mm 210mm 54mm 240 10 100

Other sizes available on request and subject to lead time

HIS-N internally threaded sleevewith cover cap

Item Ordering Hole Hole Max Fasten. Tighten. Package Priceno. designation dia. Depth Thickness Torque contents per

(Nm)

Steel (Grade 460 - 510MPa) zinc plated to min. 5 microns258015 HIS-N M8 x 90 (for HVU M10) 14mm 95mm 20mm 15 10 100258016 HIS-N M10 x 110 (For HVU M12) 18mm 115mm 25mm 28 10 100258017 HIS-N M12 x 125 (For HVU M16) 22mm 130mm 30mm 50 5 100258018 HIS-N M16 x 170 (For HVU M20) 28mm 175mm 40mm 85 5 100258019 HIS-N M20 x 205 (For HVU M24) 32mm 210mm 50mm 170 5 100

Stainless steel (grade 316 - 700MPa)258024 HIS-RN M8 x 90 (HVU M10) 14mm 95mm 20mm 12 10 100

258025 HIS-RN M10 x 110 (HVU M12) 18mm 115mm 25mm 23 10 100258026 HIS-RN M12 x 125 (HVU M16) 22mm 130mm 30mm 40 5 100258027 HIS-RN M16 x 170 (HVU M20) 28mm 175mm 40mm 70 5 100258028 HIS-RN M20 x 205 (HVU M24) 32mm 210mm 50mm 130 5 100

Available on request and subject to lead time

With external end drive


7/36140

Anchor systems



TE setting tool for HAS-E, HAS-E-F, HAS-E-Ranchor rods for external end drive

Item Ordering Connection For Use Recommended

No. Designation Thread on with Rotary

Anchor Rod Hammer

369223 TE-C-E M 8 M 8 HAS-E, HAS-E-F, HAS-E-R M8 TE 7-C, TE 16-C, TE 16-M*369224 TE-C-E M 10 M 10 HAS-E, HAS-E-F, HAS-E-R M10 TE 7-C, TE 16-C, TE 16-M*369225 TE-C-E M 12 M 12 HAS-E, HAS-E-F, HAS-E-R M12 TE 7-C, TE 16-C, TE 16-M*369226 TE-C-E M 16 M 16 HAS-E, HAS-E-F, HAS-E-R M16 TE 16-C, TE 16-M*376459 TE-T-E M 12 M 12 HAS-E, HAS-E-F, HAS-E-R M12 TE 35-C376460 TE-T-E M 16 M 16 HAS-E, HAS-E-F, HAS-E-R M16 TE 35-C376461 TE-T-E M 20 M 20 HAS-E, HAS-E-F, HAS-E-R M20 TE 35-C369227 TE-Y-E M 16 M 16 HAS-E, HAS-E-F, HAS-E-R M16 TE 56, TE 56-ATC, TE 76-ATC369228 TE-Y-E M 20 M 20 HAS-E, HAS-E-F, HAS-E-R M20 TE 56, TE 56-ATC, TE 76-ATC369229 TE-Y-E M 24 M 24 HAS-E, HAS-E-F, HAS-E-R M24 TE 56, TE 56-ATC, TE 76-ATC

* with TE-C chuck

Setting equipment for HIS-N, HIS-RN internally threaded sleeves

This HIS-S simple setting tool is screwed into the HIS-N, HIS-RN sleeve. A socket drive is then placed over the settingtool (same size as HAS rod) and using an appropriate shaft, the sleeves are set using a Hilti rotary hammer.

Item Ordering For For use withno. designation HIS-N Socket drives:

HISR-N 1/2 drive 3/4 drive

045964 HIS-S-M 8 setting tool M 8 1/2 for M8 rod 045965 HIS-S M 10 setting tool M 10 1/2 for M10 rod 045966 HIS-S M 12 setting tool M 12 1/2 for M12 rod 3/4 for M 12 rod045967 HIS-S M 16 setting tool M 16 1/2 for M16 rod 3/4 for M 16 rod045968 HIS-S M 20 setting tool M 20 3/4 for M20 rod

Setting equipment for HAS-E, HAS-E-F, HAS-E-R anchor rods

Drive sockets

This is where two nuts (double nut) are screwed into the end of the anchor rod. Using a drive socket,with appropriate connection shaft, the rods are set using a Hilti rotary hammer.

Item Orderingno. designation

1/2" DRIVE SOCKET (can also be used for double nut setting of threaded rods)060186 For M8 rod060187 For M10 rod060188 For M12 rod060189 For M16 rod

3/4" DRIVE SOCKET (can also be used for double nut setting of threaded rods)001958 For M12 rod060190 For M16 rod060191 For M20 rod060192 For M24 rod

3092011 For M30 rod3092009 For M36 rod

Connection shafts

Connection shafts can be used with appropriate drive socket for setting HAS-E, HAS-E-F,

HAS-E-R anchor rods, or with HIS-S setting tools and drive socket for setting HIS-N, HIS-RN.

Item Ordering For For UseNo. Designation Connection in Rotary

thread Hammer

032220 TE-C connection shaft 1/2 M 8, M 10, M 12, M 16 TE 7-C, TE 16-C, TE 16-M*332169 TE-T connection shaft 3/4 M 12, M 16, M 20, M 24, M 30, M 36 TE 35-C032221 TE-Y connection shaft 3/4 M 12, M 16, M 20, M 24, M 30, M 36 TE 56, TE 56-ATC, T E 76-ATC

* with TE-C chuck


8/36141

Anchor systems



Features

Fire rated

Quick curing

Versatility in types of

fastenings installed and base

materials used

Foil pack can be completelyemptied, less wastage

Easy and accurate dispensing

of adhesive

Mixer ensures accurate mixing of the adhesive components

User friendly system

Odourless: no styrene or plasticizers, can be used in confined areas

No expansion force in base material

Item Ordering Volume Package Priceno. designation contents per

334539 HIT-HY 150 (includes 2 mixers) 330ml 20 1338973 HIT-HY 150 (includes 2 mixers) 500ml 20 1373955 HIT-HY 150 JUMBO (includes 1 mixer) 1400ml 4 1335834 HIT-HY 150 promo (includes 1 mixer) 330ml 20 1

HAS-E anchor rod, comphexagon nut and washerExternal end drive for quicker installation

Item Ordering Anchor Hole Hole Max Fasten. Tighten. Package Priceno. designation length dia. Depth Thickness Torque contents per

(Nm)

Steel (Grade 5.8 - 500 MPa) zinc plated to min. 5 microns332219 HAS-E M8 x 80/14 106mm 10mm 82mm 14mm 15 20 100

332220 HAS-E M10 x 90/21 125mm 12mm 92mm 21mm 30 20 100332221 HAS-E M12 x 110/28 153mm 14mm 115mm 28mm 50 20 100332222 HAS-E M16 x 125/38 182mm 18mm 130mm 38mm 100 20 100332223 HAS-E M20 x 170/48 240mm 24mm 175mm 48mm 160 10 100332224 HAS-E M24 x 210/54 290mm 28mm 215mm 54mm 240 10 100

Steel (Grade 5.8, - 500 MPa) hot dipped galvanised to min. 40 microns333143 HAS-E-F M8 x 80/14 106mm 10mm 82mm 14mm 15 20 100333145 HAS-E-F M10 x 90/21 125mm 12mm 92mm 21mm 30 20 100333148 HAS-E-F M12 x 110/28 153mm 14mm 115mm 28mm 50 20 100333153 HAS-E-F M16 x 125/38 182mm 18mm 130mm 38mm 100 20 100333158 HAS-E-F M20 x 170/48 240mm 24mm 175mm 48mm 160 10 100333163 HAS-E-F M24 x 210/54 290mm 28mm 215mm 54mm 240 10 100

Stainless steel (316 Grade, 700 MPa)

333119 HAS-E-R M8 x 80/14 106mm 10mm 82mm 14mm 12 20 100333122 HAS-E-R M10 x 90/21 125mm 12mm 92mm 21mm 25 20 100333126 HAS-E-R M12 x 110/28 153mm 14mm 115mm 28mm 40 20 100333131 HAS-E-R M16 x 125/38 182mm 18mm 130mm 38mm 90 20 100333135 HAS-E-R M20 x 170/48 240mm 24mm 175mm 48mm 135 10 100333137 HAS-E-R M24 x 210/54 290mm 28mm 215mm 54mm 200 10 100

HIT-HY 150 injection technique

For concrete and solid masonry

Applications

Fastenings in concrete, solid masonry and hard stone

Wide range of connections:

- reinforcing bars

- threaded anchor rods

- internally threaded sleeves

- connectors, brick ties

- profiles, sections etc.

Suitable for small spacing and edge distances

330ml/500ml/1400ml foil pack

With external end drive

Technical data

For external thread HAS-E For internal thread HIS-N

Hole Designation Hole Nrec Vrec Hole Designation Hole Nrec Vrecdepth, threaded diameter, kN kN depth, internally diameter, kN kNh1 (mm) rod d1 (mm) fc,cyl=20MPa fc,cyl=20MPa h1 (mm) threaded d1 (mm) fc,cyl=20MPa fc,cyl=20MPa

80 HAS M8 10 6.0 5.6

90 HAS M10 12 8.0 9.0 95 HIS-N M8 14 8.2 6.3110 HAS M12 14 12.0 13.1 115 HIS-N M10 18 12.3 9.9

125 HAS M16 18 15.3 24.7 130 HIS-N M12 22 15.6 14.5

170 HAS M20 24 26.0 38.6 175 HIS-N M16 28 26.9 26.9

210 HAS M24 28 32.4 55.6 210 HIS-N M20 32 32.2 42.0

Nrec = Recommended working load in tension Vrec = Recommended working load in shear fc,cyl=20MPa concrete

For stainless steel, please contact your local Hilti Engineer or call 131 292

Curing time

Base material temperature +20C +5C 0C 5C

Time between setting and loading 50 min. 1.5 hours 3 hour 6 hours


9/36142

Anchor systems



HIS-N internally threaded sleevewith cover cap

Item Ordering Hole Hole Thread Tighten. Package Priceno. designation dia. Depth Depth Torque contents per

Steel (Grade 460 - 510 MPa) zinc plated to min. 5 microns258015 HIS-N M8 x 90 (for HVU M10) 14mm 95mm 20mm 15 10 100258016 HIS-N M10 x 110 (For HVU M12) 18mm 115mm 25mm 28 10 100258017 HIS-N M12 x 125 (For HVU M16) 22mm 130mm 30mm 50 5 100258018 HIS-N M16 x 170 (For HVU M20) 28mm 175mm 40mm 85 5 100258019 HIS-N M20 x 205 (For HVU M24) 32mm 210mm 50mm 170 5 100

Stainless steel (Grade 316 - 700 MPa)258024 HIS-RN M8 x 90 (HVU M10) 14mm 95mm 20mm 12 10 100258025 HIS-RN M10 x 110 (HVU M12) 18mm 115mm 25mm 23 10 100258026 HIS-RN M12 x 125 (HVU M16) 22mm 130mm 30mm 40 5 100258027 HIS-RN M16 x 170 (HVU M20) 28mm 175mm 40mm 70 5 100258028 HIS-RN M20 x 205 (HVU M24) 32mm 210mm 50mm 130 5 100

HIT-RE 500 injectiontechnique

For fastening rebar, high loading& special environment

Hilti HIT-RE 500 is a high-performance adhesive for anchoring reinforcing

bars of different diameters and at great depth. The exceptional ease of

use of this reliable, high-strength fastening system further increases its

suitability for a wide range of applications and setting conditions.

Applications Fastening to old or new concrete

Horizontal, vertical and overhead applications

Floor slabs, temporary openings (eg. tower cranes)

Construction joints, structural extensions

Starter bars

New columns, piers

Structural enhancement

Bridge/parapet renovation

Staircases, manholes

Retaining walls

Access platforms

Technical data

Embedment depth details & loading criteria are available by contacting your local Hilti Engineer.

Bar size (mm) Y10 Y12 Y16 Y20 Y24 Y28 Y32 Y36 Y40

Drill bit dia. (mm) 12-14 16-18 20-22 25-28 29-32 34-37 39-42 44-46 48-50

Item Ordering Volume Package Priceno. designation contents per

CHEMICAL INJECTION FOR SETTING REINFORCING BARS INTO CONCRETE337109 HIT-RE 500 (includes 1 static mixer, 1 mixer extension) 330ml 25 1369109 HIT-RE 500 (includes 1 static mixer, 1 mixer extension) 500ml 20 1373958 HIT-RE 500 JUMBO (includes 1 static mixer, 1 mixer extension) 1400ml 4 1

330ml / 500ml /1400ml foil pack

Features

Very high loading values with reinforcing bars in the range Y10-Y40

(400 MPa & 500MPa)

High performance fastening with threaded anchor rod

Optimum working time in extended temperature range from

-5 to +40C

Low sensitivity to oversized holes, dusty & wet holes

Also suitable for holes drilled with diamond coring equipment

Red coloured adhesive for easy checking of proper setting on site

Comprehensive technical software for effective fastening design

Pneumatic bulk dispenser available

Low wastage foil pack

Base material temperature 40C 30C 20C 10C 0C 5C

Gel time 12 min 20 min. 30 min. 2 hrs 3 hrs 4 hrs

Curing time before rebar 4 hrs 8 hrs 12hrs 24 hrs 50 hrs 72 hrscan be fully loaded


10/36143

Anchor systems



Features

Variable embedment depths. Hiltis unique, combinable, corrosion

free, composite mesh sleeve makes it possible

Optimised application, comfortable and flexible

For indoor and outdoor applications, as well as for use in dry and

wet drilled holes

Can be used at any time of the year in a temperature range between

-5 and +40C

Fastenings are free of expansion forces

High degree of fire resistance

Mortar injection control: the user identifies when the correct mortar

amount has been injected. Less mortar loss and lower costs per

fastening with full performance

HIT-HY 70 injection system

Applications

Quick and reliable fastening in:

- hollow brick masonry

- solid brick masonry

- aerated light-weight concrete

- glass construction/facades

Base Material Setting HIT-AC, HIT-IG, internallydepth threaded rod threaded sleeve(mm) M6 M8 M10 M12 M8 M10 M12

Concrete Brick N rec 0.5 0.5 0.5 0.816MPa V rec 1.0 1.5 1.5 2.0

N rec 1.8 1.8 1.8 1.8 1.8 1.8 1.8V rec 1.3 2.0 2.0 2.0 2.0 2.0 2.0

Hollow Concrete Block N rec 0.6 0.6 0.6 0.615MPa V rec 1.0 1.5 1.5 2.0

N rec 0.6 0.9 0.9 1.7 0.9 1.7 1.7V rec 1.3 2.0 2.0 2.0 2.0 2.0 2.0

Clay Common N rec 1.5 1.5 1.5 1.5(extruded) V rec 2.0 2.0 2.0 2.0

N rec 2.0 3.0 3.0 4.0 3.0 4.0 4.0V rec 2.0 2.0 2.0 2.0 2.0 2.0 2.0

Clay Common N rec 2.5 3.0 4.0 2.5 3.0 4.0

(dry pressed) V rec 2.0 2.0 2.0 2.0 2.0 2.0

Recommended load values for Australian brick. For further information refer to the FasteningTechnology Manual or contact your local Field Engineer on 131 292.

50

80

50

80

50

80

80

Technical data

Item Ordering Contents Packageno. designation (mm) contents

383677 HIT-HY 70/330/2 including 2 mixers 330 1

HIT-SC composite sleevesItem Ordering Hole Setting Package Priceno. designation dia. depth contents per

375979 HIT-SC 12x50 12mm 50mm 20 100375980 HIT-SC 12x85 12mm 85mm 20 100375981 HIT-SC 16x50 16mm 50mm 20 100375982 HIT-SC 16x85 16mm 85mm 20 100273662 HIT-SC 22x50 22mm 50mm 20 100284511 HIT-SC 22x85 22mm 85mm 20 100

HIT-IC internally threaded sleeveItem Ordering For use with Setting Package Priceno. designation sieve (size) depth contents per

47935 HIT-IC M 8x80 SC 16x85 50-80mm 10 10047936 HIT-IC M 10x80 SC 20x85 50-80mm 10 10047937 HIT-IC M 12x80 SC 20x85 50-80mm 10 100

Anchor rods for use with 85mm sieves(common size for bricks)

Item Ordering Anchor Hole Package Priceno. designation length dia. contents per

334767 HIT-AN M8 x 80/9 rod 100mm 16mm 10 100334768 HIT-AN M10 x 80/16 rod 110mm 16mm 10 100334769 HIT-AN M12 x 80/19 rod 115mm 16mm 10 100077331 HIT-A M16 x 130 rod 130mm 20mm 5 100

Anchor rods for use with 50mm sievesItem Ordering Anchor Hole Package Priceno. designation length dia. contents per

088071 HIT-M 8 x 65 65mm 16mm 10 100088072 HIT-M10 x 75 75mm 16mm 10 100088073 HIT-M12 x 80 80mm 16mm 10 100

Base material temperature Gel time Curing time

-5C 10 hours 6 hours

0C 10 min. 4 hours

5C 10 min. 2.5 hours

20C 4 min. 45 min.

30C 2 min. 30 min.

40C 1 min. 20 min.


11/36144

Anchor systems



HIT Profi System

for heavy anchoring applicationsand the post-installation of rebars

Applications

Unique and approved system for safe installation of rebar and

anchoring elements up to 40mm diameter and 3200mm in

embedment depth

HIT Profi accessory setsItem Orderingno. designation

384753 HIT Premium rebar accessory set

The Hilti HIT premium set for the rebar professionals who perform post-installationof rebars in the most challenging situations, with all the required accessories topost-install rebars up to 25 and 2500 mm in embedement depth.

Content: case, installation instructions, installation report, drilling aid, compressed-air connector, blowing extension hoses and tubes, air nozzles DL 12-32 (for rebar 8-25), holders TE-Y and TE-C, brush extensions RBS, round steel brushes RB 12-32 (for rebar 8-25), injection extension hoses and tubes, piston plugs SZ 12-32(for rebar 8-25), markers, thermometer, rebar saw


274888 HIT Profi rebar accessory set

The Hilti HIT set for those professionals who often encounter rebar installation intheir daily business, with all the required equipment to post-install rebars up to 20 mm and 800 mm in embedement depth. Compact, versatile and complete tomake best use of the Hilti HIT rebar system and gain productivity in the mostcommon applications.

Content: case, installation instructions, installation report, blow-out gun, blowingextension hoses, air nozzles DL 12-25 (for rebar 820), holders TE-Y and TE-C,brush extensions RBS, manual brush extension and handle, round steel brushes RB12-25 (for rebar 8-20), manual dispenser MD 2500, injection extension hoses,piston plugs SZ 12-25 (for rebar 8-20)

HIT Profi accessoriesItem Ordering Uni t/sales Uni t/exportno. designation Package Package

038246 HIT-BH Drilling aid 1 1 005205 HIT Protective goggles 1 100

Features

Comprehensive sets of accessories for maximising your HIT

performances and productivity gain

Great opportunity to customise your HIT installation equipment

according to your application needs


12/36145

Anchor systems



HIT Profi accessoriesItem Ordering Diameter Length Unit/sales Unit/exportno. designation (mm) (mm) Package Package

060579 Blow-out pump 1 10 381215 G 1/4" Blow-out gun 1 10

038251 HIT-DL 10/0.8 Extension hose for blow-out gun 10 0.8 1 10 038252 HIT-DL 16/0.8 Extension hose for blow-out gun 16 0.8 1 10

336643 HIT-DL A Connecting piece for air compressor 1 10038250 HIT-DL K Coupler for blowing extensions 16 10 100

336644 HIT-DL V10/1 Extension hose for HIT-DL A 10 1 1 10 371714 HIT-DL B Extension tube 16 1 10

336646 HIT-VL 16/0.7 Extension tube 16 0.7 10 80 038249 HIT-VL 16 Extension hose 16 10 m 50 m

371715 HIT-DL 8/12 Air nozzle 12 1 10371716 HIT-DL 10/14 Air nozzle 14 1 10371717 HIT-DL 12/16 Air nozzle 16 1 10

371718 HIT-DL 14/18 Air nozzle 18 1 10371719 HIT-DL 16/20 Air nozzle 20 1 10371720 HIT-DL 20/24 Air nozzle 24 1 10371721 HIT-DL 25/32 Air nozzle 32 1 10

HIT Profi accessories for brushing

238727 HIT-RBV Manual brush extension for round steel brush 0.3 1 25 229138 HIT-RBH Manual brush handle for round steel brush 0.3 1 25 263439 TE-Y Holder for brush extension RBS 1 10 263437 TE-C Holder for brush extension RBS 1 10

263438 TE-T Holder for brush extension RBS 1 10 336645 HIT-RBS 10/0.7 Brush extension for round steel brush 0.7 1 10 371722 HIT-RBS-10/0.35 Brush extension for round steel brush 0.35 1 10

380917 HIT-RB 10 Round steel brush 10 1 10336548 HIT-RB 8/12 Round steel brush 12 1 10336549 HIT-RB 10/14 Round steel brush 14 1 10336550 HIT-RB 12/16 Round steel brush 16 1 10336551 HIT-RB 14/18 Round steel brush 18 1 8336552 HIT-RB 16/20 Round steel brush 20 1 8370774 HIT-RB 18/22 Round steel brush 22 1 12380918 HIT-RB 24 Round steel brush 24 1 10336553 HIT-RB 20/25 Round steel brush 25 1 12

380919 HIT-RB 28 Round steel brush 28 1 10380920 HIT-RB 30 Round steel brush 30 1 10336554 HIT-RB 25/32 Round steel brush 32 1 12380921 HIT-RB 35 Round steel brush 35 1 10382259 HIT-RB 37 Round steel brush 37 1 10382260 HIT-RB 40 Round steel brush 40 1382261 HIT-RB 42 Round steel brush 42 1382262 HIT-RB 45 Round steel brush 45 1382264 HIT-RB 47 Round steel brush 47 1382265 HIT-RB 52 Round steel brush 52 1382266 HIT-RB 55 Round steel brush 55 1

HIT Profi accessories for injection

024632 HIT-VL 9/1.0 Extension hose 9 1 10 100

336646 HIT-VL 16/0.7 Extension tube 16 0.7 10 80038249 HIT-VL 16 Extension hose 16 10 m 50 m 335021 HIT-VL K Coupler for injection extensions 16 5 100

335022 HIT-SZ 8/12 Piston Plug 12 10 100335023 HIT-SZ 10/14 Piston Plug 14 10 100335024 HIT-SZ 12/16 Piston Plug 16 10 100335025 HIT-SZ 14/18 Piston Plug 18 10 100335026 HIT-SZ 16/20 Piston Plug 20 10 100380922 HIT-SZ 22 Piston Plug 22 10 100380923 HIT-SZ 24 Piston Plug 24 10 100335027 HIT-SZ 20/25 Piston Plug 25 10 100380924 HIT-SZ 28 Piston Plug 28 10 80

380925 HIT-SZ 30 Piston Plug 30 10 80335028 HIT-SZ 25/34 Piston Plug 32 10 80380926 HIT-SZ 35 Piston Plug 35 10 50382267 HIT-SZ 37 Piston Plug 37 10 50

380927 HIT-SZ 40 Piston Plug 40 10 40380928 HIT-SZ 42 Piston Plug 42 10 30380929 HIT-SZ 45 Piston Plug 45 10 30380930 HIT-SZ 47 Piston Plug 47 10 30382268 HIT-SZ 52 Piston Plug 52 10 50382269 HIT-SZ 55 Piston Plug 55 10 50


13/36146

Anchor systems



ED 3500 dispenser

Application

Injection of Hilti HIT adhesive mortar for fastening anchor rods and

rebars in concrete, masonry and stone

Features

Suitable for 330ml and 500ml tubes

Ideal for use in difficult to reach areas and repetitive applications

Very easy to useallows mortar to be dispensed quickly and easily

Increase job site productivity

Powerful tool with the pressure of a pneumatic system but without

the need for a heavy compressor

Easy dispensing capability in cold temperatures and deep holes

ED 3500 dispenserItem no. Ordering designation

273295 ED 3500 Basis kit

Dispenser, 2 cartridge holders, 3 round brushes, blow-out pump andprotective goggles supplied in a Hilti toolbox.

3429041 ED 3500 Complete kit

ED 3500 COMBO ( includes: 1 X Dispenser ED3500 Basic kit, 1 X Battery charger C 7/24 240V and 2 X SFB126 batteries ( 3.0 Ah NiMH )

Technical data

Dispensing time* 70 sec

Dispenser piston force 3000 N

Battery capacity: SFB 126 (12 V, 3.0 Ah NiMH) 75 foil packs


14/36

Item Ordering Min. Holeno. designation dia.

MIXERS337111 HIT-RE-M static mixer, for use with HIT-RE 500068156 HIT HY 150 mixer068071 HIT HY 20 mixer024632 HIT-EXT 9/1000 (length 1000mm) 10mm336646 HIT-EXT 16/700 (length 700mm) (for use with HIT-RE 500 only) 16mm

HIT mixers

Item Ordering Holeno. designation dia.

HOLE CLEANING EQUIPMENT060579 ABP blow-out pump (large)059725 BB blow-out bulb (small)229133 Round brush with grip 13mm dia.229134 Round brush with grip 18mm dia.229135 Round brush with grip 28mm dia.229136 Round brush with threaded connection 18mm dia.229137 Round brush threaded connection 28mm dia.229673 Round brush threaded connection 38mm dia.229674 Round brush threaded connection 50mm dia.229138 Brush extension with handle & threaded connection238727 Brush adaptor piece (internal section)

HIT dispensers andaccessories


229154 MD 2000 manual dispenser (330ml)338853 MD 2500 manual dispenser (500ml)229170 Spare foil pack holder (330ml)

339477 Spare foil pack holder (500ml)373960 Spare foil pack holder (1400 ml)229155 MD 2000 tool kit (includes MD 2000, blow out pump, brushes, 2 foil pack holders)369220 MD 2500 tool kit (includes MD 2500, blow out pump, brushes, 2 foil pack holders)373959 HIT-P 8000 D pneumatic dispenser (1400 ml)354180 HIT-P 3500F HY pneumatic dispenser (500ml)332117 HIT-BD 2000 fully automatic battery dispenser (330ml)332237 HIT-BD 2000 tool kit (includes BD2000, blow out pump, brushes, 2 foil packholders)315078 SBP 10 battery pack 378443 C7/24 smart charger

147

Anchor systems



Brushes & blow out pumps

For use with HVU, HIT-HY 150,HIT-HY20 & HIT-RE 500injection technique

ABP Blow-out pump

Brush with grip

MD 2000 / 2500dispenser

Foil pack holder

HIT-BD 2000dispenser

MD 2500Tool kit

HIT-RE-M static mixer

HIT HY 150/HY 20 mixer


15/36148

Anchor systems



HSL-3 heavy-duty anchors

A steel mechanical expansion anchor for heavy duty fastenings to

concrete and hard natural stone, where safety is a key requirement.

Applications

Fastening heavy loads e.g. columns, machines etc.

Dynamic loading, vibrations (machines, wind) For use in concrete and hard natural stone

Features

Integrated plastic section:

- to avoid turning in the hole

- to telescope and pull down

tightly (bridging of gaps)

The bolt can be retorqued

Fire rated Indicator nut version, HSL-3-B, with red cap nut which breaks off

when anchor correctly set to reveal green cap nut

Immediate keying and friction hold

High pull out and lateral shear load values

Safe and reliable fastening thanks to torque controlled force

expansion

Steel strength 8.8 with rolled thread, zinc plated to 5 microns thick

HSL-3 bolt versionSteel strength 8.8 with rolled thread, zinc plated to min. 5 microns thick

Item Ordering Hole Min. Hole Max Fasten. Tighten. Package Priceno. designation dia. Depth Thickness Torque contents per(Nm)

371775 HSL-3 M8/20 12mm 80mm 20mm 25 40 100371778 HSL-3 M10/20 15mm 90mm 20mm 50 20 100371779 HSL-3 M10/40 15mm 90mm 40mm 50 20 100384026 HSL-3 M12/20 BW PA 18mm 90mm 20mm 80 20 100384027 HSL-3 M12/25 BW PA 18mm 105mm 25mm 80 10 100371781 HSL-3 M12/25 18mm 105mm 25mm 80 20 100371782 HSL-3 M12/50 18mm 105mm 50mm 80 10 100371784 HSL-3 M16/25 24mm 125mm 25mm 120 10 100371785 HSL-3 M16/50 24mm 125mm 50mm 120 10 100371787 HSL-3 M20/30 28mm 160mm 30mm 200 6 100371788 HSL-3 M20/60 28mm 160mm 60mm 200 6 100371790 HSL-3 M24/30 32mm 180mm 30mm 250 4 100371791 HSL-3 M24/60 32mm 180mm 60mm 250 4 100

HSL-3-B bolt version with built-in indicator cap nutSteel strength 8.8 with rolled thread, zinc plated to min. 5 microns thick

Item Ordering Hole Min. Hole Max Fasten. Tighten. Package Priceno. designation dia. Depth Thickness Torque contents per

(Nm)

371808 HSL-3-B M12/25 18mm 105mm 25mm 20 100371809 HSL-3-B M12/50 18mm 105mm 50mm 10 100371811 HSL-3-B M16/25 24mm 125mm 25mm 10 100371812 HSL-3-B M16/50 24mm 125mm 50mm 10 100371814 HSL-3-B M20/30 28mm 160mm 30mm 6 100371815 HSL-3-B M20/60 28mm 160mm 60mm 6 100

371817 HSL-3-B M24/30 32mm 180mm 30mm 4 100371818 HSL-3-B M24/60 32mm 180mm 60mm 4 100

Externally threaded versions, HSL-3-G and HSL-G-R stainless steel, and their component sets, on request subject to lead time.

Autom

atic

torque

control

Technical dataRecommended load, (kN),non-cracked concrete, f = 20 MPaExtract from application conditions in Hilti fastening technology manual; please observe

special regulations when designing and making anchor fastenings.

Anchor size HSL-3 M8 HSL-3 M10 HSL-3 M12 HSL-3 M16 HSL-3 M20 HSL-3 M24

HSL-3 B M12 HSL-3 B M16 HSL-3 B M20 HSL-3 B M24

Tensile load,Nrec.(kN) 11.1 14.0 17.2 24.0 33.5 44.1

Shear load,Vrec.(kN) 17.8. 28.1 41.0 57.8 81.1 101.4


16/36149

Anchor systems



RingboltsItem Ordering Hole Hole Package Priceno. designation dia. Depth contents per

057032 Safe ring (stainless steel) 1 1057037 Safe ring white (nylon coated) 1 1057034 Safe ring (galvanised) 1 1057040 NW 35 x 16 plastic washer 1 100

HSL-3 system

371781 HSL-3 M12/25 18mm 125mm 20 100

371808 HSL-3-B M12/25 18mm 125mm 20 100067946 HSL-G-R M12 component set (S/S) 18mm 125mm 1 100

Chemical injection technique solution available on request.

Through bolting system

057066 M12 x 100 adaptor (stainless steel) 1 1057074 M12 x 66 OD backplate (stainless steel) 1 1058671 M12 threaded rod (stainless steel) 1 1067068 M12 hex. nuts (stainless steel) 50 100067062 M12 flat washers (stainless steel) 50 100057071 M12 x 100 adaptor (galvanised) 1 1053575 M12 x 66 OD backplate (galvanised) 1 1089052 M12 threaded rod (galvanised) 1 1

052341 M12 hex. nuts (galvanised) 50 100015723 M12 flat washers (galvanised) 50 100

Safe rings

Material

Three types of Safering are available:

Hot-dip galvanised

Drop-forged from Grade 8.8. high tensile steel

White nylon coated

Hot-dip galvanised Safe ring with a nylon coating for an

attractive appearance

Stainless Steel

Drop-forged from premium quality stainless steel and then

electro-polished. Required for exterior use

ProgramThread Thread

Diam.mm Length.mmSaferings material

Stainless steel, white coated,

Galvanised, NW 35x16 plastic washer 12 85

Minimum spacing and edge distance Smin and Cmin=200mm

Specifications

Hilti Saferings and fixing systems are designed to comply with the

requirements of BS 5845, AS 1891,AS 2317,AS 4626 & AS 4488.2, the

standard specification for permanent anchors used in association with

industrial safety belts and harnesses. As a quality check each Safe ring is

proof loaded to 10kN after manufacture. After installation each anchorage

must be subjected to a mandatory test in which the anchors are

proof loaded to a force of 7.5kN as per AS/NZS 1891.4, or 6 kN as per

AS/NZS 4488.2


17/36

HDA-P For Pre-Setting

(Zinc Plated)

Item Ordering Hole Effective Max Fasten. Tighten. Package Priceno. designation dia. Anchorage Thickness Torque contents per

331544 HDA-P 20-M10 x 100/20 20mm 100mm 20mm 50 12 100331546 HDA-P 22-M12 x 125/30 22mm 125mm 30mm 80 8 100331547 HDA-P 22-M12 x 125/50 22mm 125mm 50mm 80 8 100

331550 HDA-P 30-M16 x 190/40 30mm 190mm 40mm 120 4 100331551 HDA-P 30-M16 x 190/60 30mm 190mm 60mm 120 4 100

339265 HDA-P 37-M20 x 250/50 37mm 250mm 50mm 300 2 100 339266 HDA-P 37-M20 x 250/100 37mm 250mm 100mm 300 2 100

HDA-T For Through-Fastening

(Zinc Plated)

331545 HDA-T 20-M10 x 100/20 20mm 100mm 20mm 50 12 100331548 HDA-T 22-M12 x 125/30 22mm 125mm 30mm 80 8 100331549 HDA-T 22-M12 x 125/50 22mm 125mm 50mm 80 8 100331552 HDA-T 30-M16 x 190/40 30mm 190mm 40mm 120 4 100

331553 HDA-T 30-M16 x 190/60 30mm 190mm 60mm 120 4 100

339267 HDA-T 37-M20 x 250/50 37mm 250mm 50mm 300 2 100 339268 HDA-T 37-M20 x 250/100 37mm 250mm 100mm 300 2 100

HDA sherardised and stainless steel versions available on request subject to lead time


150

Anchor systems



Unity with the base material

The undercut is formed during the

setting operation as the rotating

segments are forced outwards by

the tapered section. The resulting

keying hold remains secure evenin cracked concrete under

dynamic loading.

Features

The load is applied immediately after setting the anchor

Visual check for correct setting

Complete removal possible

Fire rated

Manufactured from high grade 8.8 steel, zinc plated to min. 5 microns

Sherardised and stainless steel versions available in request

HDA design anchor

Applications

Anchor fastenings for high loads and stringent safety requirements

e.g. cranes, lift installations, machinery, instead of cast-ins

Dynamic loading

Very high shear loads

Close anchor spacing and edge distance

Base material

- Concrete

- Hard natural stone

- Small edge distances and close spacing

Sophisticated undercut geometry

A special mechanism ensures quick and reliable setting with

little effort

The segments produce their own undercut, ensuring a tight fit

A plastic ring ensures loads are taken up optimally

Technical dataRecommended load, (kN),non-cracked concrete, f yl= 20 MPaAnchor size HDA-P M10 HDA-P M12 HDA-P M16 HDA-P M 20 HDA-T M10 HDA-T M12 HDA-T M16 HDA-T M 20

Tensile load,Nrec. 21.9 31.9 60.0 91.1 21.9 31.9 60.0 91.1

Shear load,Vrec. 12.6 17.1 35.4 56 30.9 38.1 66.6 100

Note: These values are given for single anchors without influence from neighbouring anchors or concrete edges.

Consult the Hilti Fastening Technology Manual for more detailed design.


18/36151

Anchor systems



Setting tools

To expand the anchor correctly

Item Ordering For For Priceno. designation HDA-P HDA-T per

TO SUIT TE 35-C *

331843 TE-C-HDA-ST 20-M10 20-M10 x 100 20-M10 x 100 1331844 TE-C-HDA-ST 22-M12 22-M12 x 125 22-M12 x 125 1

TO SUIT TE 56-ATC287133 TE-Y-HDA-ST 20-M10 20-M10 x 100 20-M10 x 100 1287134 TE-Y-HDA-ST 22-M12 22-M12 x 125 22-M12 x 125 1

TO SUIT TE 76-ATC331846 TE-Y-HDA-ST 30-M16 30-M16 x 190 30-M16 x 190 1339269 TE-Y-HDA-ST 37-M20 37-M20 x 250 37-M20 x 250 1

*With TE-C chuck

Stop drill bit

Item Ordering For For Priceno. designation HDA-P HDA-T per

TO SUIT TE 35-C *332089 TE-C-HDA-B 20 x 100 20-M10 x 100 1332091 TE-C-HDA-B 22 x 125 22-M12 x 125 1

332090 TE-C-HDA-B 20 x 120 20-M10 x 100/20 1332092 TE-C-HDA-B 22 x 155 22-M12 x 125/30 1332093 TE-C-HDA-B 22 x 175 22-M12 x 125/50 1

TO SUIT TE 56-ATC237449 TE-Y-HDA-B 20 x 100 20-M10 x 100/20 1237450 TE-Y-HDA-B 20 x 120 20-M10 x 100/20 1237451 TE-Y-HDA-B 22 x 125 22-M12 x 125/30, 22-M12 x 125/50 1237452 TE-Y-HDA-B 22 x 155 22-M12 x 125/30 1237453 TE-Y-HDA-B 22 x 175 22-M12 x 125/50 1

TO SUIT TE 76-ATC332097 TE-Y-HDA-B 30 x 190 30-M16 x 190 1332098 TE-Y-HDA-B 30 x 230 30-M16 x 190/40 1332099 TE-Y-HDA-B 30 x 250 30-M16 x 190/60 1

339271 TE-Y-HDA-B 37 x 300 37-M20 x 250/50 1339272 TE-Y-HDA-B 37 x 350 37-M20 x 250/100 1339270 TE-Y-HDA-B 37 x 250 37-M20 x 250 1

*With TE-C chuck

Dynamic set washers forHVU and HDA

For upgrading shear resistance andimproving dynamic resistance

By using the dynamic set for static fastenings, the shear resistance is

improved significantly.

The unfavourable situation that only one row of anchors takes up the

entire load no longer exists

and the load is distributed uniformly between all anchors.

The Dynamic Set is available in zinc plated finish for M10/12/16/20/24

HVU and HDA anchors, and in stainless steel for M10/12/16/20, on request

subject to lead time.

Features

Injection washer: Fills clearance hole and thus guarantees that

the load is uniformly distributed among all anchors

Spherical washer: reduces bending moment acting on anchor

shaft not set at right angles and thus increases the tensile

loading capacity Lock nut: Prevents loosening of the nut and thus lifting of the

anchoring plate away from the concrete in case of cyclic loading


19/36152

Anchor systems



HSC safety anchor withautomatic undercuttingThe HSC anchor produces its own undercut when set. The undercut is

produced simultaneously when driving the anchor sleeve over the anchor

stud. For use in concrete and hard stone. Available with external and

internal threads.

Applications

Fastenings where safety is at stake, e.g. to secure cladding and

facades, installations and ceilings

Seating in stadiums

Fastenings in tunnels

Where high capacity with shallow embedment is required

HSC-A and HSC-IStainless steel versions on request subject to lead time

Item Ordering Hole Hole Thread Max Fasten. Tighten. Package Priceno. designation dia. Depth. Depth Thickness Torque contents per

(Nm)

EXTERNAL THREAD (ZINC PLATED)031139 HSC-A M8x40/15 14mm 46mm 15mm 10 25 100031140 HSC-A M10x40/20 16mm 46mm 20mm 20 25 100015507 HSC-A M12x60/20 18mm 68mm 20mm 30 20 100

INTERNAL THREAD (ZINC PLATED)031143 HSC-I M8x40 16mm 46mm 22mm 10 25 100031144 HSC-I M10x50 18mm 56mm 28mm 20 25 100031146 HSC-I M12x60 20mm 68mm 30mm 30 25 100

Stop bit for exact hole depthItem Ordering For For Priceno. designation HSC-A(R) HSC-I(R) per

TO SUIT TE 16-C, TE 16-M*, TE 35-C *

031157 TE-C-HSC-B 14x40 M8 x 40/15 1028568 TE-C-HSC-B 16x40 M10 x 40/20 M8 x 40 1

^ 030708 TE-C-HSC-B 18x50 M10 x 50 1^ 030709 TE-C-HSC-B 18x60 M12 x 60/20 M10 x 60 1^ 030710 TE-C-HSC-B 20x60 M12 x 60 1

^ To Suit TE 35 Only * With TE-C chuck

Setting tool for automatic undercutItem Ordering For For Priceno. designation HSC-A(R) HSC-I(R) per

TO SUIT TE 16-C, TE 16-M*, TE 35-C *031169 TE-C-HSC MW14 M8 1011267 TE-C-HSC MW16 M10 M8 1

^ 071352 TE-C-HSC MW18 M12 M10 1^ 071353 TE-C-HSC MW20 M12 1

^ To Suit TE 35-C Only * With TE-C chuck

Example of sequence for HSC-A

Features

Shallow embedment depth, avoids hitting rebars

Anchor hole drilled as usual, without undercutting

Automatic undercutting by anchor when anchor sleeve is

driven over anchor stud

Fire rated Maximum safety due to the undercut and keying action

Small spacings between fastening and edges

Fast setting: no specials undercutting tool required

For use anywhere, in the compression or cracked tension zone

of concrete

HSC-A, HSC-ARHSC-I, HSC-IR

Technical dataRecommended load, (kN),non-cracked concrete, f yl= 20 MPa

HSC-I HSC-IR

Anchor size M8x40 M10x50 M10x60 M12x60 M8x40 M10x50 M10x60 M12x60

Tensile load, Nrec. 6.1 8.5 11.1 11.1 6.1 8.5 11.1 11.1

Shear load,Vrec. 12.6 17.1 35.4 56 30.9 38.1 66.6 100

If used in cracked concrete, multiply the tensile load by the factor 0.7.

HSC-I internally threaded, zinc plated; HSC-IR internally threaded, stainless steel

HSC-I HSC-IR

Anchor size M8x40 M10x40 M12x60 M8x40 M10x40 M12x60

Tensile load, Nrec. 6.1 6.1 11.1 6.1 6.1 11.1

Shear load, Vrec. 8.3 13.3 19.3 5.9 9.3 13.5

If used in cracked concrete,multiply the tensile load by the factor 0.7.

HSC-A externally threaded, zinc plated; HSC-AR externally threaded, stainless steel

1) Drill hole with correct stop bit 2) Put HSC-A anchor in hole3) Hammer home with correct

setting tool and appropriate rotaryhammer, to create undercut


20/36153

Anchor systems



HUS-H concrete screw anchorThe Hilti HUS-H concrete screw anchor can be set efficiently and is the easy

fastening in cracked and non-cracked concrete, especially for repetitive applications.

Applications

Any fixings in concrete, solid brick and hard natural stone, eg. metal working,

steel connections, faade, plumbing, heating, base plates, construction, etc

Perfect for temporary fastenings eg: formwork, handrails etc as HUS-H is fully

removeable

Ideal for large-scale repetitive fastenings, eg. Shelving/rack systems, hand

rails, railings, stadium seating, etc

Technical data

Rated input: 470WWeight: 2.3 kg

No. load speed: 0-2200 r.p.m.

Clockwise/counter-clockwise rotation: Performance identical

Impact speed: Max. 2600 impacts/min.

Normal torque of tool: 294 Nm

Max. tightening torque when used with HUS-H anchors: 100 Nm

I tem Ordering Package Priceno. designation contents per

334204 SI 100 Impact screwdriver, in toolbox 1 1

Socket wrench insertsItem Ordering Length For SI 100 Package Priceno. designation (mm) contents per

335097 S-NSD 131/2 socket wrench insert (13 mm AF, short) 40 Concrete screw anchor 8 1 1335096 S-NSD 131/2 L. magnetic socket wrench insert (13 mm AF, long with magnet) 77 Concrete screw anchor 8 1 1334802 S-NSD 151/2 socket wrench insert (15 mm AF, short) 40 Concrete screw anchor 10 1 1336413 S-NSD 151/2 magnet socket wrench insert (15 mm AF, long with magnet) 77 Concrete screw anchor 10 1 1378234 S-NSD 211/2 socket wrench insert (21 mm AF, short) 40 Concrete screw anchor 14 1 1378235 S-NSD 211/2 M, magnet socket wrench insert (21 mm AF, short with magnet) 40 Concrete screw anchor 14 1 1

Concrete screw anchor HUS-H (delta tone)Item Ordering Hole Min. hole Max Fasten. Tightening Tensile Load Shear Load Package Priceno. designation dia. (mm) depth (mm) Thickness (mm) torque (mm) Nrec (kN) Vrec (kN) contents per

Concrete screw anchor 8335082 HUS-H 10.5x 55 8 50 5 35 3.3 7.3 50 100335083 HUS-H 10.5x 65 8 50/60 15/5 35 3.3/4.5 7.3 50 100335084 HUS-H 10.5x 75 8 50/60 25/15 35 3.3/4.5 7.3 50 100335085 HUS-H 10.5x 90 8 50/60 40/30 35 3.3/4.5 7.3 50 100

Concrete screw anchor 10335089 HUS-H 12.5x 65 10 60 5 45 4.8 10.3 50 100335090 HUS-H 12.5x 75 10 60/70 15/5 45 4.8/5.9 10.3 50 100335091 HUS-H 12.5x 85 10 60/70 25/15 45 4.8/5.9 10.3 50 100335092 HUS-H 12.5x 100 10 60/70 40/30 45 4.8/5.9 10.3 50 100

Concrete screw anchor 14377990 HUS-H 16.5x 115 14 70/90/110 45/25/5 65 10.4/16.2/20.0 24.3/26.2/27.0 16 100

Concrete screw anchor HUS-F (hot-dipped galvanised protection class)

Concrete screw anchor 10267758 HUS-HF 12.5x 65 10 60 5 45 4.8 9.1 50 100267759 HUS-HF 12.5x 75 10 60/70 15/5 45 4.8/5.9 9.1 50 100267760 HUS-HF 12.5x 85 10 60/70 25/15 45 4.8/5.9 9.1 50 100267761 HUS-HF 12.5x 100 10 60/70 40/30 45 4.8/5.9 9.1 50 100

Concrete screw anchor 14267764 HUS-HF 16.5x 115 14 70/90/110 45/25/5 65 10.4/16.2/20.0 24.3/26.2/27.0 16 100

*Recommended loads(kN) are in non-cracked concrete, fc,cyl= 20MPa

SI 100 impact screwdriverApplications

Tanagential impact in conjunction with the rotary action enables the

thread to chisel into the base material. No risk of spinning of the tool

Powerful tool especially designed for driving Hilti Concrete Screw

Anchors HUS-H 8 size and larger into concrete, and removing them

Driving screws into Hilti HRD framing anchors

Features

Electronic switch with soft-start function

Reverse switch to easily remove the anchors

Robust, reliable and professional

Little pressure required to set

Features

Ideal for temporary fixing. Easily removed and immediate loading

Various embedment depths. Close edge distance/spacing

Ductile shank and hardened tip for better performance and safety

Delta tone or hot-dipped galvanised protection

Neat finish (no protruding thread) and integrated washer for the perfect setting

Simple marking on the head enables visual control of suitability once the

anchor is set

Optimised setting speed and single-hand use with the special designed

Hilti SI 100


21/36154

Anchor systems



HSA stud anchorA stud anchor complete with nut and washer. Suitable for in-place

through fastenings. Wide range of sizes and lengths available. For use in

concrete.

Applications

Versatile fastening through in place parts like wood beams, metal

sections, columns, brackets etc

Fastening metal supports, pipe rings and metal profiles

Fastening racking, shelving and brackets

HSA stud anchor complete withnut and washer assembled

Carbon steel zinc plated to min. 5 microns

Item Ordering Hole Thread Max Fasten. Package Priceno. designation dia. Length Thickness contents per

255830 HSA M6 x 50 6mm 15mm 5mm 200 100255831 HSA M6 x 65 6mm 30mm 20mm 200 100255832 HSA M6 x 85 6mm 50mm 40mm 100 100255833 HSA M6 x 100 6mm 65mm 55mm 100 100255834 HSA M8 x 57 8mm 20mm 5mm 100 100255835 HSA M8 x 75 8mm 35mm 23mm 100 100255836 HSA M8 x 92 8mm 52mm 40mm 100 100255839 HSA M10 x 68 10mm 25mm 5mm 50 100255840 HSA M10 x 90 10mm 42mm 25mm 50 100255841 HSA M10 x 108 10mm 60mm 45mm 50 100255842 HSA M10 x 120 10mm 72mm 55mm 50 100255844 HSA M12 x 80 12mm 30mm 5mm 25 100255845 HSA M12 x 100 12mm 45mm 25mm 25 100

255846 HSA M12 x 120 12mm 65mm 45mm 25 100255847 HSA M12 x 150 12mm 95mm 75mm 25 100255848 HSA M12 x 180 12mm 125mm 105mm 25 100255849 HSA M12 x 220 12mm 165mm 145mm 25 100255852 HSA M16 x 100 16mm 35mm 5mm 16 100255853 HSA M16 x 120 16mm 50mm 25mm 16 100255854 HSA M16 x 140 16mm 70mm 45mm 16 100255855 HSA M16 x 190 16mm 120mm 95mm 16 100255857 HSA M20 x 125 20mm 45mm 10mm 10 100255858 HSA M20 x 170 20mm 85mm 55mm 10 100

Features

Easy alignment due to ductility of stud, as anchor is cold formed

End face mark for accurate identification when anchor set

Range of anchor lengths for optimised use and efficiency when

fastening materials of different thickness

Ideal for through fastenings, hole size is the same as anchor size Stand off fastenings possible, due to varying thread lengths

Quick installation with a minimum of drilling

Fire rated

Technical data (standard version HSA)Recommended load, (kN), non-cracked concrete, f yl = 20 MPaExtract from application conditions in Hilti fastening technology manual; Please

observe special regulations when designing and making anchor fastenings.

Standard anchorage depth:

Anchor size M6 M8 M10 M12 M16 M20


Shear load, Vrec. 2.9 4.4 7.1 10.2 19.1 29.8

Reduced anchorage depth (corresponds to max. fastening thickness):

Anchor size M6 M8 M10 M12 M16 M20


Shear load, Vrec. 2.9 4.4 7.1 10.2 19.1 29.8


22/36155

Anchor systems



HSA-F stud anchor supplied withnut and washer assembled

Carbon steel, hot dipped galvanised to min. 35 microns (M6-M16)

to min. 45 microns (M20).


337127 HSA-F M10x90 10mm 28mm 25mm 50 100337129 HSA-F M10x120 10mm 72mm 55mm 50 100337130 HSA-F M12x80 12mm 30mm 5mm 25 100337131 HSA-F M12x100 12mm 32mm 25mm 25 100337133 HSA-F M12x150 12mm 95mm 75mm 25 100337134 HSA-F M16x100 16mm 35mm 5mm 16 100337135 HSA-F M16x140 16mm 70mm 45mm 16 100337136 HSA-F M16x190 16mm 120mm 95mm 16 100274696 HSA-F M20x125 20mm 45mm 10mm 10 100337137 HSA-F M20x170 20mm 85mm 55mm 10 100

HSA-R stud anchor supplied withnut and washer

Stainless steel grade 316


332184 HSA-R M6 x 65 6mm 30mm 20mm 100 100332186 HSA-R M8 x 57 8mm 20mm 5mm 100 100332190 HSA-R M10 x 68 10mm 25mm 5mm 50 100332191 HSA-R M10 x 90 10mm 48mm 25mm 50 100332193 HSA-R M12 x 80 12mm 30mm 5mm 25 100332194 HSA-R M12 x 100 12mm 50mm 25mm 25 100332195 HSA-R M12 x 120 12mm 50mm 45mm 25 100

337116 HSA-R M16 x 100 16mm 35mm 5mm 16 100337119 HSA-R M20 x 125 20mm 45mm 10mm 10 100


23/36156

Anchor systems


Item Ordering Hole Hole Thread Package Priceno. designation dia. Depth Depth contents per

STANDARD (Steel zinc plated to min. 5 microns)242861 HKD-S M6 x 25 8mm 27mm 11mm 100 100242866 HKD-S M8 x 30 10mm 33mm 13mm 100 100243737 HKD-S M10 x 30 12mm 33mm 12mm 100 100248123 HKD-S M10 x 30 Bucket 12mm 33mm 12mm 500 100242869 HKD-S M10 x 40 12mm 43mm 15mm 50 100248124 HKD-S M10 x 40 Bucket 12mm 43mm 15mm 500 100

334434 HKD-E M10 x 40 Bucket (For through fixing) 12mm 43mm 15mm 500 100242871 HKD-S M12 x 50 15mm 53mm 18mm 50 100252961 HKD-D M12 x 50 * 16mm 53mm 18mm 50 100242873 HKD-S M16 x 65 20mm 70mm 23mm 25 100242875 HKD-S M20 x 80 25mm 85mm 34mm 25 100242864 HKD-S 1/4" x 25 8mm 27mm 11mm 100 100246713 HKD-S 3/8" x 40 12mm 43mm 15mm 100 100242872 HKD-S 1/2" x 50 16mm 53mm 18mm 50 100

* HKD-D for Diamond Drilling Rigs

STAINLESS STEEL (316 GRADE)247951 HKD-SR M6 x 25 8mm 27mm 11mm 100 100247952 HKD-SR M8 x 30 10mm 33mm 13mm 100 100247953 HKD-SR M10 x 40 12mm 43mm 15mm 50 100247954 HKD-SR M12 x 50 15mm 54mm 18mm 50 100

247955 HKD-SR M16 x 65 20mm 70mm 23mm 25 100247956 HKD-SR M20 x 80 25mm 85mm 34mm 25 100

Setting tools for HKD

Item Ordering Priceno. designation per

FOR MANUAL EXPANSION FOR ANCHOR SIZE243738 HSD-G M6 1/4" x 25 M6 1243740 HSD-G M8 5/16" x 30 M8 1243742 HSD-G M10 3/8" x 40 M10 X 40 1230935 HSD-G M10 3/8" x 30 M10 X 30 1243743 HSD-G M12 1/2" x 50 M12 1

243744 HSD-G M16 5/8" x 65 M16 1243745 HSD-G M20 3/4" x 80 M20 1FOR USE WITH TE 16-C243751 HSD-M M10 3/8" x 40 M10 X 40 1243752 HSD-M M12 1/2" M12 1

HKD-S drop-in anchorAn internally threaded metal anchor, with shallow embedment depth,

which can be set flush with the surface.

Applications

For the medium load range; fastenings with bolts and threaded rods for

plumbing, heating, air-conditioning and ventilation installations, pipe

suspension, air ducts etc., for securing channels, rails, plates, brackets

and suspended ceilings

Use in concrete and hard natural stone Features

A flared end for accurate setting flush with the surface, independent

of the hole depth; ideal for repetitive fastening with threaded rods of

equal length

No damage to the thread when driving in the anchor; easy to expand

Visual verification of full expansion

Anchor and setting tools form a matched system

Manual or mechanically assisted setting tools

Complete expansion after a few hammer blows

Fire rated

Flaredend

HSD-G manual setting tool HSD-M mechanical setting tool

Technical dataRecommended load, (kN), non-cracked concrete, f yl 20 MPaExtract from application conditions in Hilti fastening technology manual; Please

observe special regulations when designing and making anchor fastenings.

Standard anchorage depth:

Anchor size M6 M8 M10: 3/8" M12 M16 M201/4" 5/6" x30 x40 1/" 5/8" 3/4"

Tensile load, Nrec. 2.1 3.3 3.3 5.1 7.1 12.6 17.2

Shear load, Vrec. 2.1 3.9 4.2 4.6 8.1 12.5 19.9



24/36157


HLC external thread with combined nut and washerItem Ordering Hole Min. Hole Thread Max Fasten. Package Priceno. designation dia. Depth Size Thickness contents per

STANDARD (zinc plated)230768 HLC 6.5 x 25/5 6.5mm 30mm M5 5mm 100 100230769 HLC 6.5 x 40/20 6.5mm 30mm M5 20mm 100 100230770 HLC 6.5 x 60/40 6.5mm 30mm M5 40mm 100 100230771 HLC 8 x 40/12 8mm 40mm M6 12mm 100 100333925 HLC 8 x 40/12 bucket 8mm 40mm M6 12mm 500 100230772 HLC 8 x 55/27 8mm 40mm M6 27mm 100 100230773 HLC 8 x 70/42 8mm 40mm M6 42mm 100 100230774 HLC 8 x 85/57 8mm 40mm M6 57mm 100 100230775 HLC 10 x 40/8 10mm 47mm M8 8mm 50 100

230776 HLC 10 x 50/18 10mm 47mm M8 18mm 50 100333926 HLC 10 x 50/18 bucket 10mm 47mm M8 18mm 400 100230777 HLC 10 x 60/28 10mm 47mm M8 28mm 50 100230778 HLC 10 x 80/40 10mm 47mm M8 48mm 50 100230779 HLC 10 x 100/68 10mm 47mm M8 68mm 50 100230780 HLC 12 x 55/17 12mm 56mm M10 17mm 50 100333927 HLC 12 x 55/17 bucket 12mm 56mm M10 17mm 250 100230781 HLC 12 x 75/37 12mm 56mm M10 37mm 50 100333928 HLC 12 X 75/37 bucket 12mm 56mm M10 37mm 200 100230782 HLC 12 x 100/62 12mm 56mm M10 62mm 25 100230783 HLC 16 x 60/12 16mm 72mm M12 12mm 25 100230784 HLC 16 x 100/52 16mm 72mm M12 52mm 10 100230785 HLC 16 x 140/92 16mm 72mm M12 92mm 10 100230786 HLC 20 x 80/25 20mm 85mm M16 25mm 10 100230787 HLC 20 x 115/60 20mm 85mm M16 60mm 10 100230788 HLC 20 x 150/95 20mm 85mm M16 95mm 10 100

MECHANICALLY COATED CORROSION PROTECTION (GALVALLOY 50)3405675 HLC F 8 x 40 8mm 40mm M6 12mm 100 1003405676 HLC F 10 x 50 10mm 47mm M8 18mm 100 1003405677 HLC F 10 x 60 10mm 47mm M8 28mm 50 1003405678 HLC F 10 x 80 10mm 47mm M8 48mm 50 1003405679 HLC F 12 x 55 12mm 56mm M10 17mm 50 1003405680 HLC F 12 x 75 12mm 56mm M10 37mm 50 100

STAINLESS STEEL (316 GRADE)3405504 HLC R 6.5 x 40 6.5mm 30mm M5 20mm 100 1003405505 HLC R 6.5 x 60 6.5mm 30mm M5 40mm 100 1003405506 HLC R 8 x 40 8mm 40mm M6 12mm 100 1003405507 HLC R 8 x 65 8mm 40mm M6 37mm 100 1003405508 HLC R 10 x 40 10mm 47mm M8 8mm 100 100

3405509 HLC R 10 x 60 10mm 47mm M8 28mm 50 1003405510 HLC R 10 x 80 10mm 47mm M8 48mm 50 1003405621 HLC R 10 x 100 10mm 47mm M8 68mm 50 1003405622 HLC R 12 x 55 12mm 56mm M10 17mm 50 1003405623 HLC R 12 x 75 12mm 56mm M10 37mm 50 1003405624 HLC R 12 x 100 12mm 56mm M10 62mm 25 100

HLC sleeve anchorQuality sleeve anchor with hexagon bolt and washer or combined nut and

washer. For low to medium duty fastenings in a wide range of base

material.

Applications

Fastening through in-place parts

- handrails

- angles

- brackets

- timber parts

- electrical installation

- shelves brackets

Use in concrete, solid bricks, sand-lime blocks

Ingenious midriff prevents anchorturning in hole, even overhead

Features

Bridging of gaps

Wide range of applications in concrete, brick etc.

Use in concrete, solid bricks, sand-lime blocks

Complete anchor

Through fastening

Good holding power in low-strength base materials

Fire rated

Anchor systems



25/36158

Anchor systems



HLC flat countersunk

Item Ordering Hole Min. Hole Thread Max Fasten. Package Priceno. designation dia. Depth Size Thickness contents per

STANDARD (zinc plated)256730 HLC 6.5 x 45 F 6.5mm 30mm M5 28mm 100 100

254335 HLC 6.5 x 60 F 6.5mm 30mm M5 43mm 100 100254336 HLC 6.5 x 80 F 6.5mm 30mm M5 63mm 100 100254337 HLC 6.5 x 100 F 6.5mm 30mm M5 83mm 100 100254338 HLC 8 x 60 F 8mm 40mm M6 39mm 100 100254339 HLC 8 x 90 F 8mm 40mm M6 69mm 100 100254340 HLC 10 x 85 F 10mm 47mm M8 53mm 50 100254341 HLC 10 x 110 F 10mm 47mm M8 73mm 50 100256731 HLC 10 x 125 F 10mm 47mm M8 93mm 50 100STAINLESS STEEL (316 GRADE)3405588 HLC R 6.5 x 45 F 6.5mm 30mm M5 28mm 100 1003405589 HLC R 6.5 x 60 F 6.5mm 30mm M5 43mm 100 1003405590 HLC R 8 x 60 F 8mm 40mm M6 39mm 100 1003405631 HLC R 8 x 85 F 8mm 40mm M6 68mm 100 100

HLC-H with hexagon bolt and washer


STANDARD (zinc plated)256956 HLC 8 x 40/12-H 8mm 40mm M6 12mm 100 100230791 HLC 8 x 55/27-H 8mm 40mm M6 27mm 100 100256957 HLC 10 x 40/8-H 10mm 47mm M8 8mm 50 100230793 HLC 10 x 60/28-H 10mm 47mm M8 28mm 50 100230794 HLC 10 x 80/48-H 10mm 47mm M8 48mm 50 100256958 HLC 12 x 55/17-H 12mm 56mm M10 17mm 50 100230795 HLC 12 x 75/37-H 12mm 56mm M10 37mm 50 100230796 HLC 12 x 100/62-H 12mm 56mm M10 62mm 25 100

STAINLESS STEEL (316 GRADE)3405632 HLC R 8 x 40 H 8mm 40mm M6 12mm 100 1003405633 HLC R 8 x 65 H 8mm 40mm M6 37mm 100 1003405634 HLC R 10 x 40 H 10mm 47mm M8 8mm 100 1003405635 HLC R 10 x 60 H 10mm 47mm M8 28mm 50 100

HLC tie wire

Item Ordering Hole Min. Hole Thread Package Priceno. designation dia. Depth Size contents per

256732 HLC 6.5 x 25 T 6.5mm 30mm M5 100 100

HLC eyebolt

Item Ordering Hole Min. Hole Thread Package Priceno. designation dia. .Depth Size contents per

254343 HLC 8 x 40 EO (open) 8mm 40mm M6 50 100331673 HLC 8 x 40 EC (closed) 8mm 40mm M6 50 100

HNI nail in anchorComplete with nut and washer


064136 HNI M6x45 6mm 35mm M6 8mm 100 100064137 HNI M8x50 8.5mm 40mm M8 6mm 100 100


26/36159

Anchor systems



HT frame anchorComplete metal frame anchor comprising anchor body, expansion cone

and screw.

Applications

Fastening door and window frames

Features

No risk of distortion or forces of constraint

Expansion cone cannot be lost

Use in a wide range of base materials

- concrete

- lightweight and gas concrete

- hard and soft natural stone- solid brick

- cavity/perforated brick

Anchor body: steel of grade 4.8, zinc plated to 5 microns, chromated

Sleeve: Steel 02 Z DIN 17162, Sendzimir galvanised to 20 microns

HCA ceiling hangerLight duty steel metal anchor for overhead applications,

zinc plated to 5 microns

Applications

Ideal for suspended ceilings and lightweight suspensions.

HT10With countersunk head screw (set with Posi-Drive No.3)

Item Ordering Hole Hole Anchor Package Priceno. designation dia. Depth Length contents per

369266 HT 10/132 10mm 40mm 132mm 100 100

Item Ordering Hole Min. Hole Anchor Package Priceno. designation dia. Depth Length contents per

3405658 HCA 6.5mm 40mm 55mm 100 100

DBZ wedge anchorMetal wedge anchor, for through fastening to concrete, ceilings

Applications

Suspensions from concrete ceilings e.g. using slit-steel straps,

punched band, various hanger systems, wooden battens

Secure fixings cannot easily be removed once installed

Technical data 6/4.5 6/35

do Nominal drill bit diameter (mm) 6 6

h1 Min. hole depth (mm) 41 41

tfix Max. fastenable thickness (mm) 4.5 35

Nrec. = Tensile working load (static) in concrete fc,cyl 20-45 MPa., 0.8 kN for both sizesVrec. = Shear working load (static) in concrete fc,cyl 20-45 MPa., 1.1 kN for both sizes

DBZ 6/4.5 and DBZ 6/35 wedge anchorItem Ordering Hole Min. Hole Anchor Max Fasten. Package Priceno. designation dia. Depth Length Thickness contents per

256312 DBZ 6/4.5 6mm 41mm 49mm 5mm 100 100256311 DBZ 6/35 6mm 41mm 79mm 35mm 100 100

Features

Setting by impact expansion

Automatic follow-up expansion, thus

safe fastening

Fire rated

Steel St 3k40 (body) and Ck 60 (wedge),

zinc plated to 5 microns

Features

One piece metal hanger.

Easily set: Just hammer home, into hole, using claw hammer,

pull back to set


27/36160

Anchor systems



HHD-S cavity anchor withassembled screw

A metal anchor for lightweight fastenings into cavities and hollow

block material.

Applications

Fastenings into- cavity/perforated bricks, breeze blocks

- plasterboard, gypsum panels (drywall)

- hollow block floors

For plumbing, pipe fitting and interior finishing trades where

lightweight fastenings are needed in weak base materials

Fastening battens, channels, panels, decorative items

Steel, zinc plated to 5 microns

Item Ordering Hole Screw Base material Package Priceno. designation dia. Guage Thickness contents per

332062 HHD-S M4/12 x 38 8mm M4 8-12mm 100 100332063 HHD-S M4/19 x 45 8mm M4 14-19mm 50 100332066 HHD-S M5/12 x 52 10mm M5 8-12mm 50 100332067 HHD-S M5/25 x 65 10mm M5 18-25mm 50 100332069 HHD-S M6/9 x 38 12mm M6 6-9mm 100 100332070 HHD-S M6/12 x 52 12mm M6 8-12mm 50 100332071 HHD-S M6/24 x 65 12mm M6 18-24mm 50 100332072 HHD-S M6/40 x 80 12mm M6 35-40mm 50 100332073 HHD-S M8/12 x 54 (Hex head) 12mm M8 8-12mm 50 100

SETTING TOOLS332076 HHD-SZ 2 (for all sizes) 1 1

HSP/HFP drywall anchor

Applications

Plumbing

Interior finishing

Electrical installations

Drywall installation

Bit for HSP and HFP (D-B PH2 HSP/HFP)HFP-S

HFPHSP

Item Ordering Screw Base material Package Priceno. designation Guage Thickness contents per

332682 HSP (zinc) 8g 9-25mm 100 100332683 HSP-S (zinc) (includes screw) 8g 9-25mm 100 100332686 HFP (nylon) 8-10g 9-12mm 100 100

332687 HFP-S (nylon) (includes screw) 8-10g 9-12mm 100 100332688 D-B PH2 HSP/HFP insert bit 5 1

Features

Prefitted screw

Ergonomic setting tool for thread size M4 to M8

Quick and trouble-free installation

Features

"Shark's tooth" design for correct positioning and quick installation

Cuts its own thread One Hilti bit for anchor and screw. No setting tool required.

HSP and HFP delivered with or without screws

HP-S


28/36

HRD-U plastic frame anchor

Applications

Various base materials:

- reinforced concrete

- hard natural stone

- solid bricks- aerated concrete

- hollow/cavity brick masonry

Cladding/facade installation (metal frames/structures)

Metal construction (installing metal parts)

Roofing installation

Fastening door and window frames

161

Anchor systems



Features

For use in hollow and solid base material

High holding power, thus fewer fastenings, less installation work

and lower costs

High bending strength

Anchor body made of cadmium-free Polyamide

Screw made of zinc plated steel of 6.8 grade tensile strength

HRD-U8 frame anchor

Item no. Ordering Hole diameter Anchor length L Hole depth Min. hole depth Max. fastenable Package Pricedesignation (mm) (mm) (mm) for through-fastening (mm) thickness contents per

202341 HRD-UGT 8x60/10 8 60 50 70 10 50 100202342 HRD-UGT 8x80/30 8 80 50 90 30 50 100202343 HRD-UGT 8x100/50 8 100 50 110 50 50 100202344 HRD-UGT 8x120/70 8 120 50 130 70 50 100202345 HRD-UGT 8x140/90 8 140 50 150 90 50 100258144 S-B Tx30 torx bit 1 1

The 3-phase screw

For unique fastening quality

Innovative screw geometry for unbeaten performance.

The 3-phase screw ensures:1. Course thread for optimum screw driving.

2. New thread geometry ensures smooth controlled expansion. Increase in

resistance at the end of the driving operation ensures correct setting.

3. Fine-pitch double thread for an exceptionally secure hold even in

trouble-some materials.

+

Technical data HRD-U8 HRD-U10 HRD-U14

Drill Diameter 8 mm 10 mm 14 mm

Min Anchor Dept 50 mm 80 mm 85 mm

Non-cracked concrete fcc => 20N/mm2 1.2 kN 1.8 kN 2.3 kN

Solid brick 0.4 kN 0.8 kN 1.2 kN

Hollow brick 0.14 kN 0.5 kN 0.8 kN


29/36

HRD-U 10

Plastic anchor body,screw steel, zinc plate

Item Ordering Hole Hole Max. fasten. Package Priceno. designation dia. Depth thickness contents per

HRD-UGS HEXAGON HEAD SCREW

257277 HRD-UGS 10 x 80/10 10mm 80mm 10mm 50 100257278 HRD-UGS 10 x 100/30 10mm 80mm 30mm 50 100257279 HRD-UGS 10 x 120/50 10mm 80mm 50mm 50 100257280 HRD-UGS 10 x 140/70 10mm 80mm 70mm 50 100257281 HRD-UGS 10 x 180/110 10mm 80mm 110mm 50 100060186 13mm (M8) drive socket - 1/2" conn. 1 1032220 TE-C shaft 1/2" 1 1

HRD-UFS HEXAGON HEAD SCREW (hot-dipped galvanised)066453 HRD-UFS 10 x 80/10 10mm 80mm 10mm 50 100066454 HRD-UFS 10 x 100/30 10mm 80mm 30mm 50 100066455 HRD-UFS 10 x 120/50 10mm 80mm 50mm 50 100

HRD-URS HEXAGON HEAD SCREW (stainless steel grade 316)257291 HRD-URS 10 x 80/10 10mm 80mm 10mm 50 100257292 HRD-URS 10 x 100/30 10mm 80mm 30mm 50 100

257293 HRD-URS 10 x 120/50 10mm 80mm 50mm 50 100

HRD-UGT COUNTERSUNK HEAD SCREW257272 HRD-UGT 10 x 80/10 10mm 80mm 10mm 50 100257273 HRD-UGT 10 x 100/30 10mm 80mm 30mm 50 100257274 HRD-UGT 10 x 120/50 10mm 80mm 50mm 50 100257275 HRD-UGT 10 x 140/70 10mm 80mm 70mm 50 100257276 HRD-UGT 10 x 180/110 10mm 80mm 110mm 50 100258146 TS-B Tx40 torx bit 1 1306013 TE-C screwdriving adaptor 1 1

HRD-URT COUNTERSUNK HEAD SCREW (stainless steel grade 316)257289 HRD-URT 10 x 80/10 10mm 80mm 10mm 50 100257290 HRD-URT 10 x 120/50 10mm 80mm 50mm 50 100

162

Anchor systems



HRD-UGT, Torx T40 head screw HRD-UGS, with hex. head screw

HRD-U 14

Plastic frame anchor

Item Ordering Hole Hole Max. fasten. Package Priceno. designation dia. Depth thickness contents per

HRD-UGT Countersunk head screw312622 Frame Anchor HRD-UGT 14 x 80/10 14mm 85mm 10mm 50 100312623 Frame Anchor HRD-UGT 14 x 110/40 14mm 85mm 40mm 50 100312624 Frame Anchor HRD-UGT 14 x 140/70 14mm 85mm 70mm 50 100312625 Frame Anchor HRD-UGT 14 x 160/90 14mm 85mm 90mm 50 100312626 Frame Anchor HRD-UGT 14 x 180/110 14mm 85mm 110mm 50 100257257 Bit holder S-BH 50 M 1 1315122 Screwdriver bit S-B TX 50 1 1

HRD-UGS Hexagon head screw312632 Frame Anchor HRD-UGS 14 x 80/10 14mm 85mm 10mm 50 100312633 Frame Anchor HRD-UGS 14 x 110/40 14mm 85mm 40mm 50 100312634 Frame Anchor HRD-UGS 14 x 140/70 14mm 85mm 70mm 50 100312635 Frame Anchor HRD-UGS 14 x 160/90 14mm 85mm 90mm 50 100312636 Frame Anchor HRD-UGS 14 x 180/110 14mm 85mm 110mm 50 100335632 NSD 171/2 socket wrench insert 1 1032220 TE-C SHAFT 1/2 1 1

HRD-UGT Countersunk head screw HRD-UGS Hexagon head screw


30/36163

Anchor systems



Size Permissible load (kN)Concrete fc,cyl 20 MPa Solid brick Tension Shear Tension Shear

5 0.3 0.4 0.17 0.24

6 0.55 0.9 0.35 0.3

8 0.85 1.25 0.6 0.44

10 1.4 2.2 0.8 -

12 2.0 3.0 1.0 -

HUD-1 universal anchor

Applications

A versatile high quality plastic anchor for a wide rang of fastenings in various

base materials

Variety of base materials: concrete, natural stone, brick, sand lime brick

Wider range of lightweight fastenings using commercially available screws:

- wood laths and battens- brackets, signs, shelves and racking

- lightweight cupboards, plumbing and bathroom fittings

Item Ordering Hole Screw Package Priceno. designation dia. Gauge contents per

045626 HGN 12 12mm 8-10mm 50 100045627 HGN 14 14mm 10-12mm 50 1003092063 10 x 100 coach screw 50 100

(For smaller diameters use HUD-1)

HGN anchor for lightweight concrete

Applications

A plastic anchor with defined geometry for aerated concrete

Variety of soft base materials

- aerated concrete

Wide range of lightweight fastenings using commercially available screws

Technical data HGN12 HGN14

Nrec Rec. tensile load in 2.5 MPa aerated concrete (kN) 0.5 0.65Nrec Rec. tensile load in 5 MPa aerated concrete (kN) 0.75 1.0

Nrec Rec. tensile load in 7.5 MPa aerated concrete (kN) 1.6 2.0


h1 Min. hole depth (mm) 95 110

d Screw diameter (mm) 810 10

I Anchor length (mm) 75 85

HLD plastic toggle anchorApplications

A plastic toggle anchor for use in a wide range of base materials from

4-20 mm thick

Fastening to virtually all base materials, especially panels or similar

All lightweight fastenings

- brackets

Features Made of quality PA 6 polyamide plastic

Resilient toggling action to suit every base material

Versatile in thin walled materials, even if they are of low strength

Resistance to rotation in hole

Bridges a large range of wall/panel thickness

Simple setting; just drill hole and push in

Setting check through noticeable increase in resistance

when the screw has been driven home

Good screw guidance

Technical data HLD 2 HLD 3Nrec Rec. tensile load in drywall panel, a 12 mm (kN) 0.08 0.08


h Panel / base material thickness (mm) 4 15

ds Screw length (mm) 33 40

d Screw diameter (mm) 45 45

l Anchor length (mm) 28 35


335506 HLD 2 10mm 8g 4-12mm 150 100335507 HLD 3 10mm 8g 15-19mm 100 100


331615 HUD-1 5 x 25 5mm 6-8g 500 100

331616 HUD-1 6 x 30 6mm 8-10g 500 100331617 HUD-1 8 x 40 8mm 10-12g 400 100331618 HUD-1 10 x 50 10mm 7-8mm 200 100331619 HUD-1 12 x 60 12mm 8-10mm 100 100

Features

High-quality polyamide PA 6 plastic anchor, with no cadmium

Easy to use

Good resistance to turning in the hole when setting screw

Wide range of screws can be used

Features

High quality polyamide PA 6 plastic anchor with no cadmium

Accurate screw guidance Good keying thanks to large fins

Resistance to turning in hole


31/36164

Anchor systems



HPS-1 with prefitted drive screw


STANDARD260369 HPS-1 4/0 x 20 4mm 25mm 2mm 250 100260395 HPS-1 5/0 x 20 5mm 25mm 2mm 250 100260347 HPS-1 5/5 x 25 5mm 30mm 5mm 200 100260348 HPS-1 5/15 x 35 5mm 30mm 15mm 200 100

247850 HPS-1 5/15 x 35 bulk 5mm 30mm 15mm 2400 100260349 HPS-1 6/5 x 30 6mm 40mm 5mm 150 100230516 HPS-1 6/10 x 35 6mm 40mm 10mm 150 100260350 HPS-1 6/15 x 40 6mm 40mm 15mm 150 100247852 HPS-1 6/15 x 40 bulk 6mm 40mm 15mm 1350 100260351 HPS-1 6/25 x 50 6mm 40mm 25mm 100 100247853 HPS-1 6/25 x 50 bulk 6mm 40mm 25mm 900 100260352 HPS-1 6/40 x 65 6mm 40mm 40mm 100 100252804 HPS-1 6/40 x 65 bulk 6mm 40mm 40mm 900 100260353 HPS-1 8/10 x 40 8mm 50mm 10mm 100 100230518 HPS-1 8/20 x 50 8mm 50mm 20mm 50 100260354 HPS-1 8/30 x 60 8mm 50mm 30mm 50 100230519 HPS-1 8/40 x 70 8mm 50mm 40mm 50 100260355 HPS-1 8/60 x 90 8mm 50mm 60mm 50 100260356 HPS-1 8/80 x 110 8mm 50mm 80mm 50 100

COUNTERSUNK HEAD

260375 HPS-1 5/15 S x 35 5mm 30mm 15mm 200 100230529 HPS-1 5/30 S x 50 5mm 30mm 30mm 150 100

STAINLESS STEEL PIN260357 HPS-1 R 5/5 x 25 5mm 30mm 5mm 200 100260358 HPS-1 R 5/15 x 35 5mm 30mm 15mm 200 100260360 HPS-1 R 6/15 x 40 6mm 40mm 15mm 100 100260361 HPS-1 R 6/25 x 50 6mm 40mm 25mm 100 100

For firm tightening or removal of HPS-1 use a Pozidrive No. 2 Screwdriver

HPS-1 impact anchorA ready to use anchor comprising plastic anchor sleeve and

pre-assembled screw, which can be hammered home to expand

the anchor

Applications

Variety of base materials

- concrete

- aerated concrete

- solid and hollow brick work

Fastening pipes and cables, wood battens and components for

electrical and pipefitting / plumbing installations

Drywall partition installation, skirting boards, flashing/steel metal

Features

High quality polyamide plastic body, screw zinc plated or

stainless steel

Ready to use fastener for through fastening

Bridging of gaps due to collapsible section

Impact expansion by hammer of screwdriver

Only one anchor type required for both solid and hollow materials Can be removed with a screwdriver

Quick and simple setting, easily expanded with a few blows

of a hammer

Large programme of different versions, including stainless steel

Size Permissible load (kN) in concrete fc,cyl 20 MPaTension Nrec Shear Vrec

4/0 0.05 0.15

5/0-15 0.16 (0,10) 1) 0.35 (0,30) 1)

6/0-40 0.25 0.55 (0,35) 2)

8/0-40 0.40 (0,30) 3) 0.90 (0,50) 3)

8/60-100 0.40 0.50

1) HPS-1 5/020 2) HPS-1 6/30+6/40 3) HPS-1 8/030


32/36165

Anchor systems



Item Ordering Hole Insulation Package Priceno. designation dia. thickness contents per

332106 IDP 2/4 8mm 20-40mm 250 100332107 IDP 4/6 8mm 50-60mm 250 100

332108 IDP 6/8 8mm 70-80mm 250 100 332109 IDP 8/10 8mm 90-100mm 250 100


IN insulation fastenerA plastic insulation fastener for insulating material up to 12cm thick,

ideally soft insulating materials

Applications

Fastening soft, non-self-supporting insulating materials, primarily

mineral wool or glass wool

Wide variety of base materials- concrete

- lightweight concrete

- solid brick

- cavity/perforated brick

Features

Anchor Systems 2008

Documents