perpustakaan.uns.ac.id digilib.uns.ac.id commit to user ANALISIS PRODUK SPION PS135 DENGAN PENGATURAN PARAMETER MOLD TEMPERATURE MATERIAL PLASTIK POLIPROPILENE PADA PROSES INJECTION MOLDING (STUDI KASUS PT. SINAR AGUNG SELALU SUKSES KARANGANYAR JAWA TENGAH) SKRIPSI Oleh : PREDI ARIF NUGROHO K2509051 FAKULTAS KEGURUAN DAN ILMU PENDIDIKAN UNIVERSITAS SEBELAS MARET SURAKARTA Juli 2013
19
Embed
ANALISIS PRODUK SPION PS135 DENGAN PENGATURAN …/Analisis...perpustakaan.uns.ac.id digilib.uns.ac.id (STUDI KASUS PT. SINAR AGUNG SELALU SUKSES KARANGANYAR JAWA TENGAH) SURAKARTA
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
ANALISIS PRODUK SPION PS135 DENGAN PENGATURAN
PARAMETER MOLD TEMPERATURE MATERIAL PLASTIK
POLIPROPILENE PADA PROSES INJECTION MOLDING
(STUDI KASUS PT. SINAR AGUNG SELALU SUKSES KARANGANYAR
JAWA TENGAH)
SKRIPSI
Oleh :
PREDI ARIF NUGROHO
K2509051
FAKULTAS KEGURUAN DAN ILMU PENDIDIKAN
UNIVERSITAS SEBELAS MARET
SURAKARTA
Juli 2013
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
ii
PERNYATAAN KEASLIAN TULISAN
Saya yang bertanda tangan di bawah ini
Nama : Predi Arif Nugroho
NIM : K2509051
Jurusan/ Program Studi : PTK/ Pendidikan Teknik Mesin
Menyatakan bahwa skripsi saya berjudul “ANALISIS PRODUK SPION PS135
DENGAN PENGATURAN PARAMETER MOLD TEMPERATURE
MATERIAL PLASTIK POLIPROPILENE PADA PROSES INJECTION
MOLDING (STUDI KASUS PT. SINAR AGUNG SELALU SUKSES
KARANGANYAR JAWA TENGAH)” ini benar-benar merupakan hasil karya
saya sendiri. Selain itu, sumber informasi yang dikutip dari penulis lain telah
disebutkan dalam teks dan dicantumkan dalam daftar pustaka.
Apabila pada kemudian hari terbukti atau dapat dibuktikan skripsi ini hasil
jiplakan, saya bersedia menerima sanksi atas perbuatan saya.
Surakarta, Juli 2013
Yang membuat pernyataan
Predi Arif Nugroho
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
iii
ANALISIS PRODUK SPION PS135 DENGAN PENGATURAN
PARAMETER MOLD TEMPERATURE MATERIAL PLASTIK
POLIPROPILENE PADA PROSES INJECTION MOLDING
(STUDI KASUS PT. SINAR AGUNG SELALU SUKSES KARANGANYAR
JAWA TENGAH)
Oleh:
PREDI ARIF NUGROHO
K 2509051
Skripsi
Diajukan untuk memenuhi salah satu persyaratan mendapatkan gelar
Sarjana Pendidikan Program Studi Pendidikan Teknik Mesin
Jurusan Pendidikan Teknik dan Kejuruan
FAKULTAS KEGURUAN DAN ILMU PENDIDIKAN
UNIVERSITAS SEBELAS MARET
SURAKARTA
Juli 2013
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
iv
PERSETUJUAN
Skripsi ini telah disetujui untuk dipertahankan di hadapan Tim Penguji
Skripsi Fakultas Keguruan dan Ilmu Pendidikan Universitas Sebelas Maret
Surakarta.
Dosen Pembimbing I
Danar Susilo W. S.T., M.Eng
NIP 19790124 200212 1 002
Surakarta, Juli 2013
Dosen Pembimbing II
Budi Harjanto S.T., M.Eng
NIP 19790116 200501 1 001
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
v
PENGESAHAN
Skripsi ini telah dipertahankan di hadapan Tim Penguji Skripsi Fakultas
Keguruan dan Ilmu Pendidikan Universitas Sebelas Maret Surakarta dan diterima
untuk memenuhi salah satu persyaratan untuk mendapatkan gelar Sarjana
Pendidikan.
Hari :
Tanggal :
Tim Penguji Skripsi
Nama Terang Tanda Tangan
Ketua : Yuyun Estriyanto S.T., M.T _________________
Sekretaris : Suharno S.T., M.T _________________
Anggota I : Danar Susilo W. S.T., M.Eng _________________
Anggota II : Budi Harjanto S.T., M.Eng _________________
Disahkan oleh:
Fakultas Keguruan dan Ilmu Pendidikan
Universitas Sebelas Maret
Dekan
Prof. Dr. H. M. Furqon Hidayatullah, M.Pd
NIP 196007271987021001
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
vi
ABSTRAK
Predi Arif Nugroho. ANALISIS PRODUK SPION PS135 DENGAN
PENGATURAN PARAMETER MOLD TEMPERATURE MATERIAL
PLASTIK POLIPROPILENE PADA PROSES INJECTION MOLDING
(STUDI KASUS PT. SINAR AGUNG SELALU SUKSES KARANGANYAR
JAWA TENGAH) Skripsi, Fakultas Keguruan dan Ilmu Pendidikan Universitas
Sebelas Maret Surakarta. Juli 2013.
Tujuan penelitian ini adalah: (1) Mengetahui pengaruh variasi mold
temperature terhadap cacat sisa (flash formation) dan weld line. (2) Mengetahui
mold temperature yang menghasilkan produk dengan kualitas optimal pada proses
injection molding produk plastik polypropylene globalene 7533 (PP)
menggunakan software simulasi. (3) Mengetahui mold temperature yang
menghasilkan produk dengan kualitas optimal pada proses injection molding
produk plastik polypropylene globalene 7533 (PP) pada mesin injection molding.
(4) Mengetahui kesesuaian antara software simulasi dengan aplikasi produksi di
industri untuk desain parameter kerja mold temperatur pada proses injection
molding produk plastik polypropylene globalene 7533 (PP).
Penelitian ini menggunakan metode deskriptif kuantitatif. Sampel
penelitian yang digunakan adalah spion PS135. Data diperoleh dari simulasi
menggunakan software AutoDesk Inventor 2013 dengan parameter mold
temperature 20oC, 30
oC, 40
oC, 50
oC, 60
oC, 70
oC, 80
oC, 90
oC. Data yang
diperoleh dari hasil penelitian dimasukkan ke dalam tabel, dan ditampilkan dalam
bentuk grafik kemudian dianalisis.
Berdasarkan hasil penelitian dapat disimpulkan bahwa: (1) Mold
temperature berpengaruh pada cacat sisa flash formation dan weld line. (2)
Parameter yang optimal untuk proses injection molding menggunakan software
AutoDesk Inventor 2013 pada mold temperature 20 o
C. (3) Hasil yang optimal
pada injection molding menggunakan mesin HAITIAN HTF 160X pada parameter
mold temperature 20 oC. (4) Hasil simulasi menggunakan AutoDesk Inventor
2013 sama dengan proses di mesin injection molding yang sesungguhnya.
Kata kunci: mold temperature, polypropilene, injection molding, AutoDesk
Inventor 2013, flash formation dan weld line
perpustakaan.uns.ac.id digilib.uns.ac.id
commit to user
vii
ABSTRACT
Predi Arif Nugroho. ANALYSIS OF REARVIEW MIRROR CASE
PRODUCT OF PS135 WITH THE REGULATION OF MOLD
TEMPERATURE PARAMETER OF POLYPROPYLENE PLASTIC
MATERIAL ON INJECTION MOLDING PROCESS (A CASE STUDY AT
THE LIMITED LIABILITY COMPANY OF PT. SINAR AGUNG SELALU
SUKSES KARANGANYAR, CENTRAL JAVA). Skripsi: The Faculty of
Teacher Training and Education, Sebelas Maret University, Surakarta, July 2013.
The objectives of this research are to investigate: (1) The effect of mold
temperature variations on the flash formation and weld line; (2) The mold
temperature resulting in the rearview mirror case product with optimal quality on
the injection molding process of the polypropylene globalene 7533 (PP) plastic
product by using simulation software; (3) Mold temperature resulting in the
rearview mirror case product with optimal quality on the injection molding
process of the polypropylene globalene 7533 (PP) plastic product on injection
molding machine. (4) The correspondence between the simulation of the software
and the production application in industry on injection molding process for the
design of mold temperature of injection molding process of the polypropylene
globalene 7533 (PP) plastic product.
This research used the descriptive quantitative. The samples of the
research were the rearview mirror cases of PS135. The data of the research were
gathered from simulations by using the software of Autodesk Inventor 2013 with
the mold temperature parameters of 20oC, 30
oC, 40
oC, 50
oC, 60
oC, 70
oC, 80
oC,
and 90oC. They were then entered into a table, displayed in the form of graphs,
and analyzed.
The results of the research are as follows: (1) The mold
temperature influences the flash formation and weld line; (2) The parameter which
is optimal for the injection molding process based on the measurement with the
software of Autodesk Inventor 2013 prevails at the mold temperature of 20oC; (3)
The optimal result on the injection molding obtained through the use of machine
of HAITIAN HTF 160X exists at the mold temperature of 20oC; and (4) The
result of simulation by using the software of Autodesk Inventor 2013 is the same
as that of the process on the actual injection molding machine.