Page 1
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
131 -
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
135-145 0.00007
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
3.9-4.1 -
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
4.5 -
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
3.8 -
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
5.15 -
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
4 -
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
5.1 -
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
3.4-3.8 0.0030
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
3.4-3.8 0.0031-0.0035
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
3.2 -
Aluminum/MagnesiumAl95/Mg 5
5.6-6.1 0.0020
Aluminum/MagnesiumAl97/Mg 3
4.5-5.7 0.0019-0.0026
Aluminum/MagnesiumAl97.5/Mg 2.5
4.95 -
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
3.8 -
Aluminum/SiliconAl88/Si12
5.56 -
1
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 2
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Aluminum/SiliconAl99/Si 1
2.6-3.5 0.0042
Antimonial LeadPb96/Sb 4
24.0 -
Bismuth/LeadBi55.5/Pb44.5
43.0 -
BrassCu63/Zn37
6.2-6.6 0.0016-0.0017
BrassCu70/Zn30
6.2-7.8 0.0012-0.0016
BronzeCu89/Sn11
14-17 0.0006
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
137 0.00007
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
95 -
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
88.6 -
Constantan - ResistanceAlloyCu55/Ni45
52.0 +/-0.00002
Copper/BerylliumCu98/Be 2
5.4-11.5 0.0010-0.0018
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
1-2 -
Copper/NickelCu70/Ni30
37.4 -
Copper/TelluriumCu99.5/Te 0.5
1.92 -
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
5.0 0.0022-0.0026
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
134 0.00001
2
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 3
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
134 0.0001
Gilding MetalCu85/Zn15
4.6-5.4 0.0014-0.0016
Glass Sealing AlloyFe54/Ni29/Co17
48.9 0.0037
Gold/NickelAu82/Ni18
15.5 -
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
137 -
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
125-130 -
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
118 -
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
92 -
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
125 -
High Permeability MagneticAlloyNi80/Fe15/Mo 5
55 -
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
20 -
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
129 -
Inconel1 617Ni57/Cr22/Co12/Mo 9
1.22-1.34 -
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
103 -
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
125 -
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
122-124 -
3
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 4
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Indium/SilverIn97/Ag 3
7.5 -
Indium/TinIn50/Sn50
15 -
Invar1 - Controlled ExpansionAlloyFe64/Ni36
75-85 -
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
49.9 -
Iron/NickelFe50/Ni50
44 -
Iron/NickelFe52/Ni48
49 -
Iron/NickelFe55/Ni45
45 -
Iron/NickelFe58/Ni42
68 -
Leaded BrassCu58/Zn39/Pb 3
6.2 -
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
12.5 -
- -
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
70 0.003
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
55-62 -
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
43-48 0.00001
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
5.3-5.5 -
Monel1 alloy 400Ni65/Cu33/Fe 2
48-51 0.0019
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
61 -
Neodymium/Iron/BoronNd2Fe14
B1.1-1.7 -
Nickel Silver (18)Cu65/Ni18/Zn17
28.7 -
Nickel SilverCu62/Ni18/Zn20
29 0.0003
4
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 5
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Nickel SilverCu64/Ni12/Zn24
130 -
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
43 -
Nickel/ChromiumNi80/Cr20
108 0.00005
Nickel/CopperNi70/Cu30
48 -
Nickel/IronNi52/Fe48
45 0.0034
Nickel/IronNi80/Fe20
62 -
OFHC CopperOFHC
1.70 0.0038-0.0039
Palladium/SilverPd75/Ag25
35 0.001
Permendur 491
Co49/Fe49/V 240 -
Phosphor BronzeCu94/Sn 6
11.0-16.0 0.0006-0.0007
Platinum/IridiumPt70/Ir30
35 0.001
Platinum/IridiumPt75/Ir25
31-32 0.001
Platinum/IridiumPt80/Ir20
31-32 0.001
Platinum/IridiumPt85/Ir15
28.5-29.0 -
Platinum/IridiumPt90/Ir10
25 0.0013
Platinum/RhodiumPt60/Rh40
17.5 0.0014
Platinum/RhodiumPt70/Rh30
18.8 0.0014
Platinum/RhodiumPt87/Rh13
19.0 0.0016
Platinum/RhodiumPt90/Rh10
18.4-19.2 0.0017
Platinum/RhodiumPt94/Rh 6
19.2 0.0017
5
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 6
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
Platinum/TungstenPt92/W 8
62-68 0.00025
Silver/CopperAg72/Cu28
2 -
Silver/PalladiumAg70/Pd30
14.84 -
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
80 -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
70-80 -
Stainless Steel - 17-7PHFe/Cr17/Ni 7
80-85 -
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
70-72 -
Stainless Steel - AISI 302Fe/Cr18/Ni 8
70-72 -
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
72 -
Stainless Steel - AISI 304LFe/Cr18/Ni10
72 -
Stainless Steel - AISI 304Fe/Cr18/Ni10
70-72 -
Stainless Steel - AISI 310Fe/Cr25/Ni20
70-78 -
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
70-78 -
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
70-73 -
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
70-73 -
Stainless Steel - AISI 410Fe/Cr12.5
56-72 -
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
55 -
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
80 -
Sterling SilverAg92.5/Cu 7.5
1.8 -
T1 - Thermocouple AlloyNi90/Cr10
70.6 0.00032
6
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 7
Alloy - Electrical PropertiesElectrical resistivity
mOhmcmTemperature coefficient
K-1
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
29-33 0.0019
Tantalum/TungstenTa90/W 10
17.6 -
Tin/Lead/AntimonySn60/Pb39/Sb 1
14.8 -
Tin/SilverSn96/Ag 4
10.5 -
Tinned CopperCuSn
1 - 2 -
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
168 0.0004
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
126 -
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
135 -
Tungsten/CopperW 60/Cu40
3.7 -
Tungsten/CopperW 80/Cu20
4.1 -
Tungsten/RheniumW 75/Re25
29 -
Tungsten/RheniumW 95/Re 5
9.5 -
Tungsten/RheniumW 97/Re 3
9.5 -
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
120-130 -
7
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 8
Alloy - Magnetic Properties
Coercivity (Hc)A m-1
Curie temperatureC
Initial permeability Maximumpermeability
Remanence fromsaturation (Brem)
T
Saturation fluxdensity
T
Saturation InductionT
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
- -196 1.005 - - - -
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
- 600 - - - - -
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
- 600 - - - - -
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
- 600 - - - - -
Glass Sealing AlloyFe54/Ni29/Co17
- 435 - - - - -
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
- - 1.002 - - - -
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
- -196 1.0006 - - - -
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
- -124 1.010 - - - -
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
- <-196 1.0013 - - - -
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
- -193 1.0020 - - - -
Invar1 - Controlled ExpansionAlloyFe64/Ni36
- 279 - - - - -
Iron/NickelFe50/Ni50
- 530 - - - - -
Iron/NickelFe55/Ni45
8 450 6000 40000 1.0 - 1.6
Iron/NickelFe58/Ni42
- 380 - - - - -
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
4000 95 - 105 2 45 0.02 0.6 -
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
1.0 380 60000 240000 0.37 - 0.77
8
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 9
Alloy - Magnetic PropertiesCoercivity (Hc)
A m-1Curie temperature
CInitial permeability Maximum
permeabilityRemanence fromsaturation (Brem)
T
Saturation fluxdensity
T
Saturation InductionT
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
- -134 - - - - -
Neodymium/Iron/BoronNd2Fe14
B875-1990 310 - - 1.0-1.3 - -
Nickel/Iron/MolybdenumNi80/Fe15.5/Mo 4.5
1.2 450 50000 250000 0.35 - 0.8
Nickel/IronNi80/Fe20
<0.02 460 30000 400000 - 0.77 -
Permendur 491
Co49/Fe49/V 2- 940 - - - 2.34 -
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
- - - 1.07 - - -
9
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 10
Alloy - Mechanical Properties
Elongation atbreak%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
<45 100-200 - - - 196 - - 550-585
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
15 - - - - - - - 650-1000
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
12-25 - - - - - - - 124-290
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
<15 - - 110 - 71 220 - 365
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
5-8% 150 - - - - 331 - 510-538
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
8 60 - - - 74 90 - 175
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
5.1 130 - - - 77 - - 550
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
>10 - - 60 - 70.5 - - 159
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
<20 10-100 - - 27-34 70 160-200 - 150-430
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
<20 65-95 - - - 69 - - 245-325
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
<16 - - - - 69.5 - - 90-300
Aluminum/MagnesiumAl95/Mg 5
<20 60-120 - - - - 150-230 - 300-450
Aluminum/MagnesiumAl97/Mg 3
<25 45-100 - - 30-50 65-75 125-175 - 200-350
Aluminum/MagnesiumAl97.5/Mg 2.5
<14 - - 70 - 70 135 - 210
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
11 - - 100 - 70 210 - 340
10
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 11
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Aluminum/SiliconAl88/Si12
<20 - - - - 71.1 - - 241.5
Aluminum/SiliconAl99/Si 1
- - - - - - - - 310
Antimonial LeadPb96/Sb 4
<50 8-24 - - - - - - 28-75
Bismuth/LeadBi55.5/Pb44.5
<37.5 15.0 - - - - - - 44.1
BrassCu63/Zn37
<55 65-136 - - - 95-110 280-310 - 330-500
BrassCu70/Zn30
<65 65-160 - - 50-90 100-115 200-400 - 300-700
BronzeCu89/Sn11
<65 70-200 - - - 80-110 230-490 - 300-900
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
15 - - - - - - - 650
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
- - - - - 200 - - 800 - 2200
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
<58.5 - - - - 225 - - 860
Constantan - ResistanceAlloyCu55/Ni45
<45 100-300 - - 107 162 - - 400-590
Copper/BerylliumCu98/Be 2
<50 100-360 - - - 120-160 - - 500-1300
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
<20 130-170 - 140-180 - - - - 450-600
Copper/Cobalt/BerylliumCu97/Co 2.5/Be 0.5
- 242 - 255 - - - - 900
Copper/NickelCu70/Ni30
<45 - - - - - - - 410-420
Copper/TelluriumCu99.5/Te 0.5
<12 - - 90-100 - - - - 260
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
<22 115-135 - - 8-22 73 - - 420-500
11
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 12
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
<33 - - - 42-100 221 - - 1210
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
<25 - - 230 - - - - 560
Gilding MetalCu85/Zn15
<60 65-125 - - 67-125 110-125 210-400 - 250-400
Glass Sealing AlloyFe54/Ni29/Co17
30 - - - - 207 - - 510-520
Gold/Germanium EutecticAu88/Ge12
- - - - - - - - 185
Gold/NickelAu82/Ni18
<13 - - - - 112 - - 616
Gold/TinAu80/Sn20
- - - - - - 270-280 - 270-280
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
<60 100-230 - - 42-100 180-220 - - 600-980
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
<53 - - - - 216 - - 1000-1200
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
<52 80-200 - - 42-100 170-220 - - 550-900
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
<46 - - - - - - - 740-760
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
1 - - - - 200-210 - - 960-970
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
<50 - - - - 211 - - 860
High Permeability MagneticAlloyNi80/Fe15/Mo 5
<50 - - 115-125 - 225 - - 500-700
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
<45 180-250 - - 160 196 - - 400-900
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
<40 175-240 - - - 147-210 - - 950
12
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 13
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Inconel1 617Ni57/Cr22/Co12/Mo 9
<62 - - - 232 190-200 - - 730-760
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
<50 120-290 - - 160 157 420-570 - 600-1200
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
<15 250-410 - - - 200 - - 800-1360
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
<20 150-280 - - - 210 118-152 - 700-1250
Indium/SilverIn97/Ag 3
- 2 - - - - - - 5
Indium/TinIn50/Sn50
83 - - - - - 11 - 12
Invar1 - Controlled ExpansionAlloyFe64/Ni36
<45 160 - - - 140-150 - - 450-590
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
- - - - - - 410 - 590
Iron/NickelFe50/Ni50
<35 - - - - 159 - - 552
Iron/NickelFe52/Ni48
<30 - - - - 248 - - 450-550
Iron/NickelFe55/Ni45
- - - 240 - - - - 470
Iron/NickelFe58/Ni42
<30 - - - - 21.5 - - 566
Lead/TinPb75/Sn25
<53 - - - - - - - 23.6
Leaded BrassCu58/Zn39/Pb 3
<25 - - 100-160 - 97 - - 360-580
Magnesium alloy AZ31Mg96/Al 3/Zn 1
15 73 - - - 45 - - 290
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
16 60 - - - - 140 - 310
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
- - - 130 - 8 - 20 - - -
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
- 105-290 - - 42-100 190-221 - - 530-900
13
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 14
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
<50 - - - 107 124-159 - - 300-600
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
<20 - - - - 320 - - 560-1150
Monel1 alloy 400Ni65/Cu33/Fe 2
<40 125-190 - - 110-140 185 - - 550-950
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
<45 - - - - 179 - - 630-1370
Neodymium/Iron/BoronNd2Fe14
B- - - 580 - 150 - - 75
Nickel Silver (18)Cu65/Ni18/Zn17
<45 - - - - 125 - - 385
Nickel SilverCu45/Zn43/Ni10/Pb2
<8 - - - - - - - 460
Nickel SilverCu62/Ni18/Zn20
<45 75-190 - - 110-130 120-135 290-400 - 400-700
Nickel SilverCu64/Ni12/Zn24
<3 - - <190 - 125 - - <620
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
>4 - - 180-385 - 195-210 - - 895-1205
Nickel/ChromiumNi80/Cr20
<40 - - - - - - - 650-1100
Nickel/CopperNi70/Cu30
<50 100-260 - - 90-160 160-180 - - 480-1200
Nickel/IronNi52/Fe48
<13 - - - - 160 - - 147
Nickel/IronNi80/Fe20
<38 - - - - - - - 930
Nimonic1 alloy 90Ni53/Cr20/Co18/Ti 2.5/Al 1.5/Fe 1.5
33 - - 300 - - - - 1210
Niobium/ZirconiumNb99/Zr 1
5-30 - - 65-140 - - - - 330-620
OFHC CopperOFHC
10-45 - - 50-90 55-75 120-135 - 200-300 200-320
Palladium/CopperPd60/Cu40
- - - - - - - - 1100-1150
Palladium/SilverPd75/Ag25
- - - - - - - - >350
14
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 15
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Palladium/SilverPd77/Ag23
- - - - - - - - 350-700
Permendur 491
Co49/Fe49/V 26 - - - - - - - -
Phosphor BronzeCu94/Sn 6
<60 80-225 - - 62 90-120 250-430 - 320-740
Platinum/IridiumPt70/Ir30
<18 - - 280-285 - 236 - - 980-1100
Platinum/IridiumPt75/Ir25
<20 - - 230-240 - 218-220 - - 860-1500
Platinum/IridiumPt80/Ir20
<20 - - 190-200 - 198 - - 680-700
Platinum/IridiumPt85/Ir15
- - - 135-188 - 185.5-189.6 - - 517-981
Platinum/IridiumPt90/Ir10
<25 130-190 - - - - - - 380-620
Platinum/RhodiumPt60/Rh40
<30 - - 115-150 - - - - 569-588
Platinum/RhodiumPt70/Rh30
<30 130-238 - - - - - - 460-930
Platinum/RhodiumPt87/Rh13
<32 - - - - - - - 330-580
Platinum/RhodiumPt90/Rh10
<35 90-165 - - - - - - 320-620
Platinum/RhodiumPt94/Rh 6
<10 70-130 - - - - - - 300-610
Platinum/TungstenPt92/W 8
<5 - - 180 - 230 - - 895 - 2070
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
<30 - - - - - - - 1020
Stainless Steel - 17-4PHFe/Cr17/Ni 4
<11 - - - - - - - 1050-1150
Stainless Steel - 17-7PHFe/Cr17/Ni 7
<25 - - - 61-115 214 - - 1020-1550
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
<60 165 - - 20-136 190-210 - - 550-1260
Stainless Steel - AISI 302Fe/Cr18/Ni 8
<60 160-190 - - 20-136 190-210 - - 510-1100
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
<35 - - - - 193 - - 500-1000
15
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 16
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Stainless Steel - AISI 304LFe/Cr18/Ni10
<58 - - - - - - - 565
Stainless Steel - AISI 304Fe/Cr18/Ni10
<60 160-190 - - 20-136 190-210 - - 460-1100
Stainless Steel - AISI 310Fe/Cr25/Ni20
<50 170 - - 20-136 190-210 - - 530-1200
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
<60 160-190 - - 20-136 190-210 - - 460-860
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
<60 160-190 - - 20-136 190-210 - - >560
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
<60 160-190 - - 20-136 190-210 - - 520-1100
Stainless Steel - AISI 410Fe/Cr12.5
<38 140-175 - - 10-136 190-210 - - 480-1500
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
>12 - - - - 200 - - 860
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
<25 <290 - - - 200 - - -
Sterling SilverAg92.5/Cu 7.5
<41 - - 71 - - - - 207
T1 - Thermocouple AlloyNi90/Cr10
<44 - - - 108 186 - - 620-780
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
<44 - - - 108 220 - - 550-780
Tantalum/TungstenTa90/W 10
<30 - - - - 205-207 - - 550-620
Tantalum/TungstenTa97.5/W 2.5
<20 - - 115-160 - 186 - - 240-310
Thoriated TungstenW 99/Th 1
<4 - - - - - - - 480
Tin/AntimonySn95/Sb 5
- - - - - - - - 44
Tin/SilverSn96/Ag 4
<49 - - - - - 82 - 98
Tinned CopperCuSn
<50 - - 40-120 - 117 - - 200-400
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
>10 - - - 20 106-114 - - >895
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
<15 - - - - 103.5 - - 830
16
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 17
Alloy - Mechanical PropertiesElongation at
break%
Hardness -Brinell
Hardness -Rockwell
Hardness -Vickerskgf mm-2
Izod impactstrengthJ m-1
Modulus ofelasticity
GPa
Shear strengthMPa
Tensile modulusGPa
Tensile strengthMPa
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
<14 - - - - 96-103 - - 930
Tungsten/CopperW 60/Cu40
- - 82 140 - - - - 460
Tungsten/CopperW 72/Cu28
- - 92 - - - - - 600
Tungsten/CopperW 80/Cu20
- - - - - - - - 675
Tungsten/Nickel/IronW 95/Ni 3.5/Fe 1.5
7 - - - - 280 - 320 - - 825
Tungsten/RheniumW 75/Re25
<20 - - - - 370-430 - - 1310-2100
Tungsten/RheniumW 95/Re 5
<20 - - - - - - - 220
Tungsten/RheniumW 97/Re 3
<15 - - - - - - - 1180
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
<33 - - - 42-100 221 - - 550-1210
Zinc/AluminumZn96/Al 4
5 92 - - - 85 - - 330
17
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 18
Alloy - Physical Properties
Densityg cm-3
Melting pointC
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
8.14 2500
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
7.1 1520
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
2.7 585
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
2.82 535
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
2.7 555
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
2.8 447-635
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
2.675 555
Aluminum/IronAl50/Fe50
- 1175
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
2.53 600-655
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
2.69 645
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
2.69 -
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
2.69 -
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
2.7 655
Aluminum/MagnesiumAl95/Mg 5
2.65 -
Aluminum/MagnesiumAl97/Mg 3
2.67 -
Aluminum/MagnesiumAl97.5/Mg 2.5
2.68 605
18
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 19
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Aluminum/ManganeseAl99.7/Mn 0.3
2.42 -
Aluminum/NickelAl50/Ni50
- 1350
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
2.70 555
Aluminum/SiliconAl65.7/Si34.3
- 860
Aluminum/SiliconAl75/Si25
- 760
Aluminum/SiliconAl88/Si12
2.66 577
Aluminum/SiliconAl90/Si10
- 600
Aluminum/SiliconAl98/Si 2
- 650
Aluminum/SiliconAl99/Si 1
2.7 600
Aluminum/TitaniumAl75/Ti25 (Atomic %)
3.11 -
Antimonial LeadPb95/Sb 5
- 194
Antimonial LeadPb96/Sb 4
11.04 250-300
Bismuth/LeadBi55.5/Pb44.5
10.44 124
Bismuth/TinBi58/Sn42
8.56 -
BrassCu63/Zn37
8.45 900-920
BrassCu70/Zn30
8.55 910-965
BronzeCu89/Sn11
8.9 830-1020
C-SolderSn based
7.4 232
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
7.1 1500
Chromium/AluminumCr80/Al20
6.29 -
19
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 20
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Chromium/NickelCr50/Ni50
8.05 1335-1355
Chromium/TitaniumCr70/Ti30
- 1570
Cobalt/AluminumCo90/Al10
- 1400
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
8.3 1450 - 1460
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
9.13 1330-1410
Cobalt/ChromiumCo70/Cr30
- 1470
Cobalt/TitaniumCo94/Ti 6
- 1450
Cobalt/TungstenCo50/W 50
- 1530
Constantan - ResistanceAlloyCu55/Ni45
8.9 1225-1300
Copper/BerylliumCu98/Be 2
8.25 860-1000
Copper/IronCu70/Fe30
- 1430
Copper/LeadCu80/Pb20
- 1010
Copper/NickelCu70/Ni30
8.94 1171
Copper/SiliconCu85/Si15
- 840
Copper/SilverCu70/Ag30
- 945
Copper/SilverCu98/Ag 2
- 1075
Copper/TinCu80/Sn20
8.1-8.9 880
Copper/TitaniumCu56.4/Ti43.6
- 980
20
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 21
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Copper/TitaniumCu70/Ti30
- 935
Copper/TitaniumCu90/Ti10
- 1000
Copper/ZirconiumCu70/Zr30
- 1140
Copper/ZirconiumCu87/Zr13
- 980
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
2.8 -
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
8.1 1340-1390
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
7.22 1380-1490
Gallium/Indium/TinGa62/In22/Sn16
6.4 11
Gallium/Indium/TinGa68.5/In21.5/Sn10
6.4 11
Gallium/IndiumGa75.5/In24.5
6.35 15.7
Gilding MetalCu85/Zn15
8.75 1000-1025
Glass Sealing AlloyFe54/Ni29/Co17
8.36-8.50 1450
Gold/Germanium EutecticAu88/Ge12
- 340-350
Gold/NickelAu82/Ni18
15.8 955
Gold/PalladiumAu75/Pd25
16 1410
Gold/TinAu80/Sn20
- 280
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
9.24 1340-1390
Hastelloy1 B-2Ni68/Mo28/Fe 2/Cr 1/Co 1
9.22 1370
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
9.22 1418
21
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 22
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
8.94 1270-1390
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
8.22 1260-1355
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
8.3 1480
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
8.97 1300-1370
High Permeability MagneticAlloyNi80/Fe15/Mo 5
8.8 -
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
7.95 1350-1420
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
8.44 1290-1350
Inconel1 617Ni57/Cr22/Co12/Mo 9
8.36 1332-1380
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
8.42 1370-1425
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
8.19 1260-1335
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
8.25 1390-1425
Indium/SilverIn97/Ag 3
7.38 143
Indium/TinIn50/Sn50
7.30 125
Indium/TinIn95/Sn 5
7.14 238
Invar1 - Controlled ExpansionAlloyFe64/Ni36
8.0 1427
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
7.78 -
22
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 23
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Iron/NickelFe50/Ni50
8.39 1400-1450
Iron/NickelFe52/Ni48
8.2 1450
Iron/NickelFe55/Ni45
8.25 1400-1450
Iron/NickelFe58/Ni42
8.11 1450
Iron/SiliconFe83/Si17
- 1200
Iron/SiliconFe91/Si 9
- 1380
Iron/TitaniumFe60/Ti40
- 1380
Lead/TinPb75/Sn25
9.96 270
Leaded BrassCu58/Zn39/Pb 3
8.47 875
Magnesium alloy AZ31Mg96/Al 3/Zn 1
1.8 605-630
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
1.8 525-610
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
8 1130
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
8.8 -
Manganese/NickelMn70/Ni30
- 1040
Manganese/NickelMn88/Ni12
7.08 -
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
8.4 960
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
10.22 2500-2600
Molybdenum/RheniumMo52.5/Re47.5
13.48 -
Molybdenum/TitaniumMo80/Ti20
8.15 2520
Molybdenum/TitaniumMo90/Ti10
9.07 2600
23
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 24
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Monel1 alloy 400Ni65/Cu33/Fe 2
8.84 1300-1350
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
8.4 2400-2460
Neodymium/Iron/BoronNd2Fe14
B7.5 -
Nickel Silver (18)Cu65/Ni18/Zn17
8.73 1070-1110
Nickel SilverCu62/Ni18/Zn20
8.72 1060-1110
Nickel SilverCu64/Ni12/Zn24
8.67 -
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
8.14 1195-1325
Nickel/BoronNi85/B 15
- 1065
Nickel/ChromiumNi80/Cr20
8.4 1400
Nickel/CopperNi70/Cu30
8.9 1300-1350
Nickel/Iron/MolybdenumNi80/Fe15.5/Mo 4.5
8.75 1454
Nickel/IronNi52/Fe48
8.4 1450
Nickel/IronNi80/Fe20
- 1445
Nickel/IronNi81/Fe19
8.68 1445
Nickel/ManganeseNi75/Mn25
- 1240
Nickel/ManganeseNi92/Mn 8
- 1420
Nickel/MolybdenumNi80/Mo20
- 1430
Nickel/MolybdenumNi84/Mo16
- 1445
Nickel/SiliconNi62/Si38
- 966
Nickel/TitaniumNi60/Ti40
- 1280
24
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 25
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Nickel/TitaniumNi70/Ti30
- 1200
Nickel/TitaniumNi90/Ti10
- 1340
Nickel/ZirconiumNi70/Zr30
- 1450
Niobium/TitaniumNb56/Ti44
- 2200
Niobium/ZirconiumNb99/Zr 1
8.59 2399
NitinolNi55/Ti45
6.5 1310
OFHC CopperOFHC
8.9 1083
Palladium/SilverPd75/Ag25
11.7 1250
Palladium/SilverPd77/Ag23
11.16 -
Permendur 491
Co49/Fe49/V 28.15 -
Phosphor BronzeCu94/Sn 6
8.9 900-1050
Platinum/IridiumPt70/Ir30
21.7 2153
Platinum/IridiumPt75/Ir25
21.7 1820-2133
Platinum/IridiumPt80/Ir20
21.7 1830-2123
Platinum/IridiumPt85/Ir15
21.6 2093
Platinum/IridiumPt90/Ir10
21.56 1800
Platinum/RhodiumPt60/Rh40
17.0 2226
Platinum/RhodiumPt70/Rh30
17.6 1920-1930
Platinum/RhodiumPt83/Rh17
19 -
Platinum/RhodiumPt87/Rh13
19.64 1840-1865
25
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 26
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Platinum/RhodiumPt90/Rh10
19.97 1830-1855
Platinum/RhodiumPt94/Rh 6
20.55 1825-1835
Platinum/TungstenPt92/W 8
21.3 1870 - 1910
Roses MetalBi50/Pb28/Sn22
9.85 95-110
Silver SteelFe98/C 1.1/Cr 0.4/Mn 0.3/Si0.2
7.80 -
Silver/CopperAg72/Cu28
9.96 779
Silver/PalladiumAg70/Pd30
10.90 1225
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
7.81 -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
7.82 1400-1450
Stainless Steel - 17-7PHFe/Cr17/Ni 7
7.81 1435
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
7.9 1400-1420
Stainless Steel - AISI 302Fe/Cr18/Ni 8
7.92 1400-1420
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
8.03 1455
Stainless Steel - AISI 304Fe/Cr18/Ni10
7.93 1400-1455
Stainless Steel - AISI 310Fe/Cr25/Ni20
7.9 1400-1455
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
7.96 1370-1400
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
7.9 1400-1425
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
7.93 1400-1425
Stainless Steel - AISI 410Fe/Cr12.5
7.73 1480-1530
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
7.8 1450
26
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 27
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
7.8 1440
Sterling SilverAg92.5/Cu 7.5
10.4 788-891
T1 - Thermocouple AlloyNi90/Cr10
8.5 1420
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
8.5-8.7 1315-1390
Tantalum/TungstenTa90/W 10
16.9 3080
Tantalum/TungstenTa97.5/W 2.5
16.66 3014
Thoriated TungstenW 99/Th 1
19.298 -
Thoriated TungstenW 99.4/Th 0.6
19.3 -
Tin/AntimonySn95/Sb 5
7.26 232-240
Tin/Lead/AntimonySn60/Pb39/Sb 1
8.42 183
Tin/LeadSn50/Pb50
- 183-216
Tin/LeadSn60/Pb40
- 188
Tin/SilverSn96/Ag 4
7.39 221-246
Tinned CopperCuSn
8.92 1083
Titanium Alloy Beta 3Ti77.5/Mo12/Zr 6/Sn4.5
5.07 -
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
4.42 1600-1650
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
4.45 1700-1750
Titanium/AluminumTi65/Al35
- 1480
Titanium/AluminumTi78/Al22
- 1600
Titanium/AluminumTi88/Al12
- 1660
27
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 28
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Titanium/ChromiumTi80/Cr20
- 1560
Titanium/IronTi50/Fe50
- 1310
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
4.93 815-900
Titanium/MolybdenumTi84/Mo16
- 1900
Titanium/MolybdenumTi85/Mo15
- 1900
Titanium/SiliconTi92/Si 8
- 1330
Titanium/VanadiumTi90/V 10
- 1680
Tungsten/ChromiumW 90/Cr10
- 3100
Tungsten/CobaltW 50/Co50
14.1 -
Tungsten/CopperW 60/Cu40
13.0 -
Tungsten/CopperW 65/Cu35
14.9 -
Tungsten/CopperW 72/Cu28
14.4 -
Tungsten/CopperW 80/Cu20
15.4 -
Tungsten/Nickel/IronW 95/Ni 3.5/Fe 1.5
18.1 -
Tungsten/RheniumW 75/Re25
19.7 3100
Tungsten/RheniumW 95/Re 5
19.4 3350
Tungsten/RheniumW 97/Re 3
19.4 3325
Tungsten/TitaniumW 95/Ti 5
16.57 3300
Vanadium/ChromiumV 75/Cr25
- 1850
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
8.18 1340-1390
28
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 29
Alloy - Physical PropertiesDensityg cm-3
Melting pointC
Woods MetalBi50/Pb25/Cd12.5/Sn12.5
9.67 70
Zamak 410 - Zinc/Aluminum/Copper/MagnesiumZn95/Al 4/Cu 1/Mg
6.7 -
Zinc/AluminumZn50/Al50
- 560
Zinc/AluminumZn96/Al 4
6.7 379-388
Zinc/CopperZn95/Cu 5
- 500
Zinc/NickelZn90/Ni10
- 800
Zirconium/AluminumZr90/Al10
- 1440
Zirconium/NickelZr70/Ni30
- 1150
Zirconium/VanadiumZr56.5/V 43.5
- 1869
29
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 30
Alloy - Thermal Properties
Coefficient of thermalexpansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Alloy 825Ni39.5/Fe32/Cr22/Mo 3/Cu 2/Ti
14.1 @20-200C - - 440 @23C - - 11.1 @23C
Aluchrom O1 - ResistanceAlloyFe70/Cr25/Al 5
11.0 @20-100C - 1250 - - - 16 @23C
Aluminium alloy 6061Al97.5/Mg 1/Si 0.6/Fe 0.5/Cu0.4
22.7-23.9 - 130-150 878-914 - - 152-169
Aluminum alloy 2011Al93/Cu 5.3/Fe 0.7/Si 0.4/Pb0.3/B
23 @20-100C - - - - - 138 @23C
Aluminum alloy 6082Al97.4/Si 1/Mg 0.9/Mn 0.7
24 @10-100C - - - - - 180 @23C
Aluminum alloy 7075Al90/Zn 5.5/Mg 2.5/Cu 1.5/Si0.5
24.4 @20-250C - - - - - 130 @20C
Aluminum alloy EN AC 42100Al 91.7/Si 7/Mg 0.3
21.5 @20-100C - - - - - 160 @20-100C
Aluminum/Lithium/CopperAl95/Li 2.5/Cu 1.5/Mg 1
21.4 @20-100C - - 930 @23C - - 93.5 @C
Aluminum/Magnesium/Manganese/ChromiumAl96.45/Mg 2.6/Mn 0.8/Cr0.15
23.6 @20-100C - - - - - 135 @23C
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 0.6
23.0 @20-100C - - 904 @23C - - 180-193 @23C
Aluminum/Magnesium/SiliconAl98/Mg 1/Si 1
23.0 @20-100C - - - - - 180-195 @23C
Aluminum/Magnesium/SiliconAl99/Mg 0.5/Si 0.5
23.4 @20-100C - - 960 @23C - - 209 @23C
Aluminum/MagnesiumAl95/Mg 5
23.0-23.5 @20-100C - - - - - 125-130 @23C
Aluminum/MagnesiumAl97/Mg 3
23.5 @20-100C - - - - - 135-160 @23C
Aluminum/MagnesiumAl97.5/Mg 2.5
23.7 @20-100C - - 880 @23C - - 138 @23C
30
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 31
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Aluminum/Silicon/Magnesium/ManganeseAl97.5/Si 1.0/Mg 0.8/Mn 0.7
24 @20-100C - - 894 @23C - - 180 @23C
Aluminum/SiliconAl88/Si12
20.4 @20-100C - - - - - 121 @23C
Aluminum/TitaniumAl75/Ti25 (Atomic %)
21 @20-100C - - - - - 115 @23C
Antimonial LeadPb96/Sb 4
27.8 @20-100C - - - - - 30.5 @23C
Bismuth/LeadBi55.5/Pb44.5
- - - 155 @23C - - 4 @85C
BrassCu63/Zn37
19.0-20.5 @20-100C - - - - - 125 @23C
BrassCu70/Zn30
19.0-20.0 @20-100C - - - - - 109-121 @23C
BronzeCu89/Sn11
17.0 @20-100C - - - - - 42-50 @23C
Chromaloy O1 - ResistanceAlloyFe75/Cr20/Al 5
11 @20-100C - 1250 - - - 16 @23C
Cobalt/Chromium/Iron/Nickel/Molybdenum/ManganeseCo40/Cr20/Fe15/Ni15/Mo 7/Mn 2/C/Be
12.5 @0-100C - - 430 @20C - - 12.5 @20C
Cobalt/Chromium/Tungsten/Nickel/Iron/ManganeseCo50/Cr20/W 15/Ni10/Fe 3/Mn 2
12.6 @25-100C - - - - - 9.4 @23C
Constantan - ResistanceAlloyCu55/Ni45
14.9 @20-100C - 500 - - - 19.5 @23C
Copper/BerylliumCu98/Be 2
17.0 @25-300C - - - - - 60-120 @23C
Copper/Chromium/ZirconiumCu98.9/Cr 1.0/Zr 0.1
- - - - - - 320 @23C
Copper/NickelCu70/Ni30
16.2 @20-300C - - 377 @23C - - 29.4
Copper/TelluriumCu99.5/Te 0.5
- - 350 - - - -
31
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 32
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Dural1 - Aluminum/Copper/MagnesiumAl95/Cu 4/Mg 1
22.5 @20-100C - - - - - 147 @23C
Evanohm1 - PrecisionResistance AlloyNi75/Cr20/Al 2.5/Cu 2.5
11.7 @20-100C - 300 435 @23C - - 14.6 @23C
Fecralloy1 - Iron/ChromiumFe72.8/Cr22/Al 5/Y 0.1/Zr 0.1
11.1 @20-100C - 1100-1300 - - - 16 @23C
Gallium/Indium/TinGa68.5/In21.5/Sn10
- - - - - - 55
Gilding MetalCu85/Zn15
18.7 @25-300C - - - - - 159 @23C
Glass Sealing AlloyFe54/Ni29/Co17
4.81 @20-200C - - 439 @23C - - 17.3 @23C
Gold/Germanium EutecticAu88/Ge12
13 @20-100C - - - - - 44 @23C
Gold/NickelAu82/Ni18
14.0 @20-700C - - - - - 49 @23C
Gold/TinAu80/Sn20
16 @20-100C - - - - - 57 @23C
Hastelloy1 B - CorrosionResistant AlloyNi62/Mo28/Fe 5/Cr/Mn/Si
10.3 @20-100C - 760 - - - 11.1 @23C
Hastelloy1 B-2Ni68/Mo28/Fe 2/Cr 1/Co 1
10.3 @20-100C - - - - - -
Hastelloy1 B-3Ni65/Mo28.5/Cr 1.5/Fe 1.5/(Co+ Mn + W ) 3.5max
10.6 @20-100C - 400 - - - 11.2 @23C
Hastelloy1 C276 - HeatResisting AlloyNi57/Mo17/Cr16/Fe/W/Mn
10.8-11.3 @20-100C - 1090 427 @23C - - 10.1-12.5 @23C
Hastelloy1 XNi49.5/Cr22/Fe18/Mo 9/Co 1/W
13.0 @25-100C - - 486 @23C - - 9.1 @23C
Havar1 - High-Strength Non-Magnetic AlloyCo42.5/Cr20/Ni13/Fe/W/Mo/Mn
12.5 @0-50C - - - - - 13.0 @23C
Haynes1 230 alloyNi62/Cr22/W 14/Mo 2
13 @25-200C - - 397 @23C - - 8.9 @23C
High Permeability MagneticAlloyNi80/Fe15/Mo 5
- - - 455 @23C - - 19 @23C
32
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 33
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Incoloy1 alloy 800 - HeatResisting AlloyNi32.5/Cr21/Fe
14.2-15.8 @20-100C - - 460 @23C - - 11.5-12.9 @23C
Inconel 6251 - CorrosionResistant AlloyNi61/Cr22/Mo 9/Fe 5
12.8 @20-100C - - 410 @23C - - 9.8 @23C
Inconel1 617Ni57/Cr22/Co12/Mo 9
11.6 @20-200C - - 419 @23C - - 13.4 @23C
Inconel1 alloy 600 - HeatResisting AlloyNi72/Cr16/Fe 8
11.5-13.3 @20-100C - - 444 @23C - - 14.8 @23C
Inconel1 alloy 718 - HeatResisting AlloyNi53/Fe19/Cr19/Nb/Mo/Ti
13.0 @20-100C - 700 435 @23C - - 11.2 @23C
Inconel1 X750 - HeatResisting AlloyNi74/Cr15/Fe 7/Ti/Al/Nb
12.6 @20-100C - - 431 @23C - - 12.0 @23C
Indium/SilverIn97/Ag 3
22 @20-100C - - - - - 73 @23C
Indium/TinIn50/Sn50
20 @20-100C - - - - - 34 @23C
Invar1 - Controlled ExpansionAlloyFe64/Ni36
1.7-2.0 @20-90C - - 515 @23C - - 13 @23C
Iron/Chromium/MolybdenumFe90/Cr 9/Mo 1
11.3 @25-100C - - - - - 26.0 @23C
Iron/NickelFe50/Ni50
9.9 @25-450C - - 502 @23C - - 14 @23C
Iron/NickelFe52/Ni48
8.5 @20-100C - 450 502 @23C - - 16.7 @23C
Iron/NickelFe55/Ni45
7 @20-100C - - 460 @23C - - 13 @23C
Iron/NickelFe58/Ni42
4.8 @30-100C - - 502 @23C - - -
Leaded BrassCu58/Zn39/Pb 3
20.9 @20-100C - - 380 @23C - - 123 @23C
Magnesium alloy AZ31Mg96/Al 3/Zn 1
26 @20-100C - - 1001 - - 96
Magnesium Alloy AZ61Mg93/Al 6/Zn 1
26 @20-100C - - 1050 @23C - - 79.5 @0C
Magnetic Shape MemoryAlloyNi50/Mn28/Ga22 (Atomic %)
20 1090 45 - 50 45 16
33
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 34
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Magnetic Shielding AlloyNi77/Fe14/Cu 5/Mo 4
13.0 @20-100C - - - - - 30-35 @23C
Manganin1 - Resistance AlloyCu86/Mn12/Ni 2
14-19 @20-100C - 300 - - - 22 @23C
Molybdenum HighTemperature Alloy TZMMo99/Ti 0.5/Zr 0.1
5.3 @20-100C - 400 305 @23C - - 126 @23C
Monel1 alloy 400Ni65/Cu33/Fe 2
13.9-14.1 @20-100C - 450 - - - 21.7 @23C
Monel1 alloy K-500Ni63/Cu30/Al3/Fe2/Mn1.5/Ti0.5
8 @20-150C - - 419 @23C - - 17 @23C
Neodymium/Iron/BoronNd2Fe14
B5.2 @20-100C - - - - - 9 @23C
Nickel Silver (18)Cu65/Ni18/Zn17
16.2 @20-300C - - 380 @23C - - -
Nickel SilverCu62/Ni18/Zn20
16.0-17.1 @25-300C - - - - - 28 @23C
Nickel SilverCu64/Ni12/Zn24
16 @20-200C - - - - - 42 @23C
Nickel/Beryllium/TitaniumNi97.5/Be 1.95/Ti 0.5
14 @20-200C - - - - - 48 @23C
Nickel/ChromiumNi80/Cr20
14 @20-100C - 1150-1250 - - - 13.4 @23C
Nickel/CopperNi70/Cu30
13.6-14.0 @20-100C - - 420 @23C - - 26 @23C
Nickel/IronNi52/Fe48
8.5 @20-100C - - 450 @23C - - 16.7 @23C
Nickel/IronNi80/Fe20
12.9 @20-100C - - - - - 34.6 @23C
OFHC CopperOFHC
16.8 @25-100C - 750-950 - - - 395 @23C
Permendur 491
Co49/Fe49/V 29.5 @20C - - - - - -
Phosphor BronzeCu94/Sn 6
17.0 @20-100C - - - - - 50-75 @23C
Platinum/IridiumPt70/Ir30
8.6 @20-100C - - - - - -
Platinum/IridiumPt80/Ir20
8.3 @0-100C - - - - - -
Platinum/IridiumPt90/Ir10
8.7 @20-100C - - - - - 31 @23C
34
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 35
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
Platinum/RhodiumPt60/Rh40
- - 1700 - - - -
Platinum/RhodiumPt90/Rh10
- - - - - - 38 @23C
Silver SteelFe98/C 1.1/Cr 0.4/Mn 0.3/Si0.2
- - - - - - 32.0 @20C
Stainless Steel - 15-7PHFe/Cr15/Ni 7/Mo 2.25
14.4 @20-90C - - - - - -
Stainless Steel - 17-4PHFe/Cr17/Ni 4
11.9 @21-93C - - - - - 14.9 @23C
Stainless Steel - 17-7PHFe/Cr17/Ni 7
15.3 @20-90C - - - - - 16.7 @23C
Stainless Steel - AISI 301Fe/Cr17/Ni 7/C 0.1max
18.0 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 302Fe/Cr18/Ni 8
15-18 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 303Fe/Cr18/Ni 9/Mn/Si
17.3 @20-200C - - - - - 16.3 @100C
Stainless Steel - AISI 304LFe/Cr18/Ni10
17.3 @23C - - - - - 16.2 @23C
Stainless Steel - AISI 304Fe/Cr18/Ni10
18.0 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 310Fe/Cr25/Ni20
16-18 @20-100C - - - - - 16.3 @23C
Stainless Steel - AISI 316Fe/Cr18/Ni10/Mo 3
16-18 @20-100C - - 502 @23C - - 16.3 @23C
Stainless Steel - AISI 321Fe/Cr18/Ni 9/Ti
18.0 @20-100C - 800 - - - 16.3 @23C
Stainless Steel - AISI 347Fe/Cr18/Ni10/Nb
16-18 @20-100C - 800 - - - 16.3 @100C
Stainless Steel - AISI 410Fe/Cr12.5
10-12 @20-100C - 750 - - - 18-24 @23C
Stainless Steel - AISI 420Fe86.7/Cr13.0/C 0.3
10.3 @0-100C - - 460 @23C - - 24.9 @100C
Stainless Steel - DuplexFe/Cr22/Ni 5.5/Mo 3/N
13.7 @20-100C - - 500 @23C - - 19.0 @23C
Sterling SilverAg92.5/Cu 7.5
19 @20-100C - - 245 @23C - - -
T1 - Thermocouple AlloyNi90/Cr10
17.2 @20-1000C - 1100 - - - 19 @23C
35
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021
Page 36
Alloy - Thermal PropertiesCoefficient of thermal
expansionx10-6 K
-1
Crystallizationtemperature
C
Maximum usetemperature in air
C
Specific heatJ K-1 kg
-1Temperature -Austenitic
C
Temperature -Martensitic
C
Thermal conductivityW m-1 K
-1
T2 - Thermocouple AlloyNi95/(Al+Mn+Si) 5
16.8 @20-1000C - 1100 446 @23C - - 30-32 @23C
Tantalum/TungstenTa97.5/W 2.5
6.48 @20-500C - - 141 @23C - - 55 @23C
Thoriated TungstenW 99/Th 1
- - - 146 @23C - - -
Tin/Lead/AntimonySn60/Pb39/Sb 1
24.0 @15-110C - - - - - 50.2 @23C
Tinned CopperCuSn
16.9 @20-100C - - - - - 391.1 @C
Titanium/Aluminum/VanadiumTi90/Al 6/V 4
8.0 @20-100C - - - - - 5.8 @23C
Titanium/Aluminum/VanadiumTi94.5/Al 3/V 2.5
9.66 @20-200C - - - - - 7.6 @23C
Titanium/Molybdenum/Niobium/Aluminum/SiliconTi78.8/Mo15/Nb 3/Al 3/Si 0.2
7.07 @20-100C - - 490 @23C - - 7.60 @23C
Tungsten/CopperW 60/Cu40
11.7 @20C - - 240 @25C - - 228 @23C
Tungsten/CopperW 72/Cu28
10.2 @20C - - 210 @25C - - 220 @23C
Tungsten/CopperW 80/Cu20
- - - - - - 145 @23C
Tungsten/RheniumW 75/Re25
4.48 @0-500C - - - - - -
Tungsten/RheniumW 97/Re 3
2.9 @20-100C - - - - - -
Waspaloy1 - Heat ResistingAlloyNi58/Cr19/Co14/Mo/Ti/Al/Fe
11.7 @20-100C - - - - - 10.7 @23C
36
Goodfellow Corporation 125 Hookstown Grade Road, Coraopolis, PA 15108-9302. USA
Tel: 1-800-821-2870 : Fax 1-800-283-2020
All information and technical data are given as a guide only. Although every effort has been made to ensure that the information
is correct, no warranty is given as to its completeness or accuracy. September 17 2021