This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Allis ChalmersA brief history about Allis Chalmers
Allis Chalmers farm tractors were in production from 1914 through 1985. In 1985, Deutz acquired the Allis Chalmers brand and then sold it to AGCO in 1990. In an effort to preserve America’s agricultural heritage, Steiner Tractor Parts offers many restoration quality components for collectors and enthusiasts of these machines.
Anthony Dyson of Sanford, North Carolina
Customer submitted photos
Thanks for giving us your best shot! The following photos were submitted by folks just like you in our annual catalog photo contest. Our complete album can be viewed at www.steinertractor.com/tractor-photo-winners View more pictures and tractor stories at AntiqueTractorBlog.com
"Before I started to build this skidder I collected parts that I thought I might use on the project and borrowed $4,000.00." Gerald Sundberg, Duluth, Minnesota
"Allis Chalmers D19. We have owned and used it for 20 years. It still bales our hay every year." Melissa Schwartz, Festus, Missouri
"Recently restored 1952 WD Allis. I won the tractor at an auction as a barely running, well-used machine right out of the field." Noel Allard, Menahga, Minnesota
ACS004GK $16.80 Gasket Set (For ACS004)Replaces: 70299958NOTE: For carburetor gasket order ABC408.
ACS217 $4.95 Manifold Stud (For ACS004)Replaces: 70203072 (4-1/2" long, 3/8" - 16 NC both ends) USA made NOTE: 6 studs used per engine; Sold individually.
ACS1762 $5.50Muffler Bracket fits: Early D17 gas, Styled WC, WD, WD45; Will also fit the B, C, CA, RC if customer trims approximately 1" off the length & redrill one hole if needed USA made
ACS003 $169.95 Manifold fits: D14, (D15 up to SN: 9001 gas); Will fit D15 gas SN: 9001 & up, but customer must make an adaptor for muffler; I-60, I-600Replaces: 70234143
ACS003GK $9.75Gasket (For ACS156, ACS003)Replaces: 70234140 USA made
Manifolds, parts cont...Order # Price Description / Application
ACS004 $174.50Manifold w/out Threaded Exhaust & Bracket fits: D17 up to SN: 32000 gas w/out threaded exhaustReplaces: 70224782, 70229416
ACS081 $174.50 Manifold w/ Threaded Exhaust fits: D17 series III, IV SN: 32001 & up; 170, 175 gas (All w/ threaded exhaust)Replaces: 70257485 NOTE: Will also fit Early D17, WD, WD45 gas, LP when threaded pipe exhaust is desired.
ACS1875 $9.95Exhaust Pipe fits: D17 SN: 32001 & up gas, LP, 170 gas, 175 gasReplaces: 70234541 (1-1/2" pipe thread x 4" length) USA made
ABC1878 $1.75 Manifold Nut & Lockwasher fits: D15 diesel, D17, D19 gas, diesel, 170, 175 gas, Replaces: 70237091(7/16" - 20 NF) NOTE: Brass nut, yellow zinc lock washer. 6 or more used per tractor; Sold individually.
ACS1872 $5.95 Manifold Stud fits: D17, 170, 175 gas, LP; Combines E, E3 both w/ 226 gas engine, Replaces: 70229339(7/16" - 14 NC x 7/16" - 20 NF x 4-3/4" length) NOTE: 6 used per engine; Sold individually.
ACS005 $267.00Manifold fits: D19 gas; Combines: A, C, F w/ 6-cyl. 230, 262 C.I. Allis Chalmers engine, Replaces: 74513468, 74516769
COS010GK $19.95Manifold Gasket (For ACS005) fits: D19 gas USA made NOTE: For carburetor gasket order ABC410.
ABC2511 $3.95 Turbocharger to Exhaust Manifold Mounting Gasket fits: D19 - 8550Replaces: 74025781 USA madeNOTE: See website for full applications.
Turbo chargerFits: Some D19, 190, 190XT, 200, 7000, 7010, 7020, early 8010 when converted or using TO4B80 Air Research turboReplaces: 74008894, 74009171
Description Order # Price
NEW! Turbo Charger (NEW not Rebuilt) .......ACS3681 ..........$374.50w/ Mounting GasketNOTE: Early engines used Rajay or Thompson turbos, but must change oil lines, etc. to convert to TO4B80 Air Research style turbo. See website for all applications including Combines & Industrials.
Tips on ordering an engine piston ring set:
Measure old rings before ordering. Do not order by tractor model only. To ensure you order the correct rings, you will need the following information:
1 Bore size2 Thickness of each ring3 Quantity of each ring thickness per piston
Piston rings can not be returned if opened. Call or email for price and availability of other sizes.
Make your own gasket with ourgasket material. Made in the USA!
Order # Price Description / Application
ABC448 $18.75 Exhaust Manifold Gasket Material (1/16" thick x 12" wide x 28-1/2" long)NOTE: Perforated steel core.
ABC1830 $13.95 Cork / Rubber Rollpack Gasket Material (1/16" thick x 12" wide x 24" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.
ABC1835 $14.95 Cork / Rubber Rollpack Gasket Material (3/32" thick x 12" wide x 24" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.
ABC1844 $15.95 Gasket Paper (0.0160" thick x 18" wide x 98" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.
ABC1846 $22.95 Gasket Paper (0.0275" thick x 20" wide x 108" long) NOTE: For making general purpose gaskets. Do not use for high temperature applications.
En
gin
e p
arts
Piston ring sets - USA made (unless noted)
Order # Price Application
Fits: Some early B w/ Waukesha Flathead engine (If 3 ring piston, discard 1 compression ring) & early B (w/ AC engine) 4-cyl.ABC2166 $81.99 ABC2166: 3-1/4" bore, (3) 0.125" compression rings, (1) 0.187" oil ring
Fits: Some B, C, CA, IB, RC; D10, D12 both up to SN: 3500 ABC2070 Replaces: 70230093, 79017908ABC2070 $77.75 ABC2070: 3-3/8" standard bore, (3) 0.125" compression rings, (1) 0.187" oil ring
ABC2072 $152.50 ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings NOTE: On some engines, discard 1 oil ring per cylinder.
"Renew the performance of your engine with our line of new aftermarket turbo chargers. This turbo charger has all new components assembled in a state of the art factory that specializes in manufacturing turbo chargers. O.E.M. quality at an aftermarket price - No core charge required. Includes mounting gaskets and an installation sheet. This is a direct replacement for the listed applications."
9STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
En
gin
e parts
Engine overhaul kits:Inframe or out of frame kits are available by special order for G, B, C, CA, RC, WC, WD, WD45, D10 through 8070. For price and availability call, or visit Special Order Parts under Shop Online on our website.
Piston ring sets - USA made (unless noted) cont...
11STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
En
gin
e parts
Valve train kitsNOTE: For valve train kits not listed please call.
Order # Price Application
ACS323 $155.95
Fits: G w/ N-62 Continental engineNOTE: Includes NEW valves, guides, springs, locks, retainers.
ACS2129 $119.95 (For valves w/ rotators) fits: (B, IB, C with engine SN: CE161057 & up), CA, D10, D12, D14, (D15 up to SN: 9000), H3, I40, I400, RC gas, LP, Replaces: (4) - 70234829 (intake valves), (8) - 70206879 (valve springs), (4) - 70228589 (exhaust valves), (8) - 70234824 (valve guide), (16) - 70206880 (valve keepers) NOTE: Does not include retainers. To use on earlier engines customer must use exhaust valve roto caps 70224926 (not supplied from STP, Inc.).
ACS3303 $128.50 (For valve seats w/ a 45 degree angle) fits: WC, WF both w/ engine SN: 84247 & up, WD, WD45 gas NOTE: Includes valve stem seals, does not include retainers. Will fit earlier WC if you change valve seats - available by special order.
ACS3309 $124.50 Fits: D17, 170, 175, Combines, Industrial models w/ G226 gas, LP enginesNOTE: Includes valve stem seals, does not include retainers. Fits cylinder head casting AM4659, AM4472. The intake valve seat angle is at 30 degrees. The exhaust valve seat angle is at a 45 degree angle.
ACS089 $44.95 Crankshaft Pulley Fits: CA, (D10 up to SN: 3500), D12 up to SN: 3000, D14; Serviceable for B, C, IB but does not have provision for hand crank Replaces: 70236741, AM4529(5" pulley dia., 5/8" belt width) NOTE: Set screw NOT included.
ACS069 $185.00 Crankshaft Pulley (Double groove power steering w/ cone-shaped allen screw) Fits: WD, WD45 w/ & w/out power steering, Replaces: 70227395NOTE: Includes set screw.
ACS154 $78.50 Crankshaft Pulley fits: D10 SN: 3501 & up, D12 SN: 3001 & up, D15, I60, I500, I600, Replaces: 70235043, AM4761(5-1/16" pulley dia., 3/8" belt width)NOTE: Includes set screw.
ABC1996 $9.95 Front Crankshaft Seal fits: B, IB, C, CA (All w/ engine SN: CE177567 & up, 1943 & up); D10, D12, D14, D15, H3, WC, WD, WD45, WF, I40, I60, I400, I600 gas, LPReplaces: 70224929, 70226620, 70275814(1.500" I.D., 2.000" O.D., 0.250" wide)NOTE: WC, WD, WD45, WF w/ engines up to SN: 269166 can not reuse seal retainer 224929 as this seal is wider.
ABC2263 $18.95Front Crankshaft Seal fits: GReplaces: 70800223, 70272367(2.000" I.D. 2.722" O.D. 0.465" wide)USA made
ABC270 $5.50 NEW! Front Crankshaft Dust Seal fits: GReplaces: 800224, 70800224(2.000" I.D., 3.156" O.D., 0.375" wide)USA made NOTE: Felt.
12 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Crankshaft, parts cont...Order # Price Description / Application
IHS1307 $8.95 Front Crankshaft Seal fits: D19 gas; Also fits the following diesels: WD45, D15, D17, D19, Replaces: 74513621(1.875" I.D., 2.627" O.D., 0.312" wide)
ACS2829 $14.50 Rear Crankshaft Seal fits: B, C, CA, IB, RC using 206847 retainer, Replaces: 70225805(3.375" I.D., 3.955" O.D., 0.270" width)USA made NOTE: Original felt style.
ABC2056 $9.95Rear Crankshaft Seal fits: G w/ N62 Continental engine, Replaces: 70800225(3.375" I.D., 4.381" O.D., 0.500" wide)
ACS2037 $8.952-pc. Rear Crankshaft Main Seal fits: W, WC, WD, WF, WD45 gas, LPReplaces: 70224945, 70227120
ACS2388 $9.952-pc. Rear Crankshaft Main Seal fits: D17, 170, 175 gas, LP, Replaces: 70229180, 70241294 USA made
Crankshaft, parts cont...Order # Price Description / Application
ACS3486 $22.95 16-pc. Connecting Rod Shim Stock Kit fits: B, IB, C, CA, D272, RC w/ 116, 125 C.I. engines, Replaces: 70207523(0.004" thick) USA madeNOTE: Kit is 1 set of 16 shims.
ACS3492 $22.95 12-pc. Main Bearing Cap Shim Kit fits: B, IB, C, CA, D272, RC w/ 116, 125 C.I. engines, Replaces: 70206964, 70211236(0.004" thick) USA madeNOTE: Kit is 1 set of 12 shims.
ACS3498 $22.95 16-pc. Connecting Rod Shim Stock Kit fits: WC, WD, WF w/ 201 C.I. enginesReplaces: 70204720 (0.004" thick)USA made NOTE: Kit is 1 set of 16 shims.
ACS3504 $24.95 12-pc. Main Bearing Cap Shim Kit fits: WC, WD, WF, (WD45 gas, LP) w/ 201 C.I. & very early 226 C.I. gas, LP engines, Replaces: (4) 70227149, (8) 70204721 (0.004" thick) USA madeNOTE: Kit is 1 set of 12 shims.
Crankshaft bearingsNOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order # Price Description Applications Replacement number(s)
The following fit Some G w/ N62 ContinentalACS2872 $24.50 Standard Connecting Rod Bearing (For (1.500") standard rod journal & horizontal
split rod caps)70800499
ACS2874 $24.50 Connecting Rod Bearing (For 0.010" undersize (1.490") rod journal & horizontal split rod caps)
ACS2876 $24.50 Connecting Rod Bearing (For 0.020" undersize (1.480") rod journal & horizontal split rod caps)
ACS2878 $24.50 Connecting Rod Bearing (For 0.030" undersize (1.470") rod journal & horizontal split rod caps)
ACS2880 $26.50 Connecting Rod Bearing (For 0.060" undersize (1.440") rod journal & horizontal split rod caps)
ACS250 $98.50 Main Bearing Set (Set of 4 - 2 bearings) (2.000" standard size) USA madeNOTE: Thrust washers NOT included.
70800498
ACS2882 $101.25 Main Bearing Set w/ Thrust Washers (For 0.010" undersize (1.990") main journal)ACS2884 $101.25 Main Bearing Set w/ Thrust Washers (For 0.020" undersize (1.980") main journal)ACS2886 $101.25 Main Bearing Set w/ Thrust Washers (For 0.030" undersize (1.970") main journal)
Fits: B SN: 101 & up, C, CA, IB, RCACS2481 $21.99 Standard Connecting Rod Bearing (For 1.937" standard rod journal) 70223629ACS2483 $20.75 Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA made 70223639ACS2524 $20.75 Connecting Rod Bearing (For 0.020" (1.917") under size rod journal) USA made
The following fit B, C, CA, IB, RC, B125 Power UnitsACS2763 $119.99 Main Bearing Set (For 2.250" standard main journal) 70206962, 70206961ACS2766 $119.99 Main Bearing Set (For 0.010" (2.240") undersize main journal size) USA made
ACS2768 $119.99 NEW! Main Bearing Set (For 0.020" (2.230") undersize main journal size)
The following fit D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 4-cyl. 138, 149, 160 C.I. gas, LP)ACS1952 $69.95 Standard Connecting Rod Bearings (Set of 4) (For 1.937" standard rod journal) USA made 70228486, 70237802ACS2485 $17.15 Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA madeACS2488 $17.15 Connecting Rod Bearing (For 0.020" (1.917") undersize rod journal) USA madeACS1954 $194.99 Main Bearing Set (For 2.749" standard main journal) USA made 70237651, 70237652,
70237830, 70237831ACS2776 $156.65 Main Bearing Set (For 0.010" (2.739") undersize main journal size)ACS2778 $168.25 Main Bearing Set (For 0.020" (2.729") undersize main journal size) USA made
The following fit D17, (WC w/ engine SN: 13655 & up), WD, WD45, 170, 175 gas, LPACS2490 $13.25 Standard Connecting Rod Bearing (For 2.375" standard rod journal) USA made 70231125ACS2493 $13.25 Connecting Rod Bearing (For 0.010" (2.365" undersize rod journal) USA made
ACS2562 $13.25 Connecting Rod Bearing (For 0.020" (2.355") undersize rod journal) USA made 70223625The following fit WC, WD, WD45, WF (All gas, LP w/ 201 & early 226 engines)ACS2770 $119.95 Main Bearing Set (For standard main journal size)
(2.436" front & 2.477" center & rear main standard journal size) USA made70228620
ACS2772 $117.75 Main Bearing Set (For 0.010" undersize main journal)(2.426" front & 2.467" center & rear undersize main journal size) USA made
ACS2774 $117.75 Main Bearing Set (For 0.020" undersize main journal)(2.416" front & 2.457" center & rear undersize main journal size) USA made
The following fit D17, 170, 175 gas, LP w/ crankshaft 229022 w/ center main thrust bearing ACS2780 $89.95 Main Bearing Set (For (3.000") standard main journal size) USA made 241103, 234177,
70241103, 70234177ACS2782 $89.95 Main Bearing Set (For 0.010" (2.990") undersize main journal size) USA madeACS2784 $89.95 Main Bearing Set (For 0.020" (2.980") undersize main journal size) USA made
The following fit D15 diesel, D17 diesel, D19 gas, diesel, WD45 dieselABC2495 $15.95 Standard Connecting Rod Bearing (For Standard 1.998" rod journal) USA made 74517331ABC2498 $15.95 Connecting Rod Bearing (For 0.010" (1.988") undersize rod journal) USA made 74514864The following fit I60, 6040 w/ Perkins 3-cyl. 144, 152 C.I. gas, dieselABC2888 $14.95 Standard Connecting Rod Bearing 3-cyl. Set 72080082ABC2890 $14.95 Connecting Rod Bearing 3-cyl. Set (For 0.010" (2.239") undersize rod journal) 72080083ABC2892 $14.95 Connecting Rod Bearings 3-cyl. Set (For 0.020" (2.229") undersize rod journal) 72080084ABC2894 $14.99 Connecting Rod Bearing 3-cyl. Set (For 0.030" (2.219") undersize rod journal) 72080085ABC2898 $22.50 Main Bearing Set (For 2.749" standard main journal) 72080078ABC2900 $22.50 Main Bearing Set (For 0.010" (2.739") main journal size) 72080079ABC2902 $22.50 Main Bearing Set (For 0.020" (2.729") main journal size) 72080080ABC2904 $22.50 Main Bearing Set (For 0.030" (2.719") main journal size) 72080081ABC2811 $7.99 4-pc. Thrust Washer Set (Standard (0.122") thick) 72080086, 72080088ABC2813 $9.95 4-pc. Thrust Washer Set (Oversize (0.129") thick) 72080087, 72080089
14 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Engine assy. & break-in lubeContains a special additive to cover the wear surfaces that help prevent scoring & galling during initial engine start up. Also contains corrosion inhibitors to help prevent rust & pitting of surfaces & zinc for older engine valve train protection. Use on bearings, camshafts, lifters, oil pumps, etc. (4 oz. bottle) USA made
Description Order # Price
Melling Engine Assembly & Break-In Lube .ABC3346 ..........$6.50NOTE: Not for use on cylinder wall or piston rings.
Oil capsOrder # Price Description / Application
IHS338 $9.95 Engine Oil Fill Cap w/ Gasket fits: G, Replaces: 70800287(1-3/4" I.D., 1-3/8" tang to tang)NOTE: Has (2) tangs on top mounted from center out. Dipstick not included.
Oil Fill / Breather Cap w/ Clip & Copper Filter Element fits: B, IB, C, CA, RC, WC (On rocker arm cover); Late WD, WD45, WF, D10, D12, D14, D15, D17, 170, 175, 190XT, I-40, I-400, I-60, I-600IHS406 Replaces: 203196, 205298, 200267ACS178 Replaces: 70205298(3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top.
ACS178(w/out clip)
$38.50
JDS500 $32.50 Oil Fill / Breather Cap w/ Copper Filter Element fits: WC, Early WD, WF, (On governor housing) D15 diesel, D19 both up to engine SN: D-03046Replaces: 70207552 (1-1/2" tall)USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe.
ABC042 $12.99Oil Fill / Breather Cap w/ Clip & Filter Element fits: Same as JDS500Replaces: 70207552 (1-1/2" tall)NOTE: Economy style.
ACS286 $15.50
Oil Fill Cap w/ Gasket fits: WD45, 170, 175 gas, Replaces: 70226376 (2-3/16" I.D.)
Oil pan drain plug, gasketsOrder # Price Description / Application
ABC539 $7.95 Oil Pan Drain Plug fits: B SN: 64501 & up, IB, C, CA, WC, WD, WD45, D10 - D21, (170, 175 gas only), 180 - 220, 6060, 6070, 6080, 7000, 7010, 7020, 8010 gas, diesel, LP Replaces: 74026437 (7/8" - 18 UNF)USA made NOTE: White zinc finish.
15STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
En
gin
e parts
Oil pump parts - USA made cont...Order # Price Description / Application
ACS3454 $14.50 Oil Pressure Relief Valve Spring fits: WC, WD, WF, WD45 gas, (D17 gas up to SN: 24001), Replaces: 70229181 (3.040" o/a length, 0.550" O.D., 0.073" wire dia.)NOTE: Used w/ original oil pumps 203100, 226259, 229540, 232436, 232554. Mounts in right side of cylinder block.
Oil pump parts - USA madeOrder # Price Description / Application
ACS322 $176.70Oil Pump Kit fits: G w/ N-62 Continental engine, Replaces: 70800264, 70800266, 70800267, 70800271, 70800273, 70800658 NOTE: Must size bushing to fit.
ABC3465 $3.95 Oil Pump Relief Valve Spring fits: G w/ N-62 Continental engine, Replaces: 70800277 (2.030" o/a length, 0.445" O.D., 0.058" wire dia.) NOTE: The spring is on the right side of the block.
ACS3420 $124.50Oil Pump Repair Kit fits: B, C, CA, D10, D12, D14, D15, H3, IB, RC gas, LPNOTE: See website for all applications, replacement numbers & contents.
ACS3398 $46.95 2-pc. Oil Pump Rotor Blade (Vanes) Set fits: Same as ACS3420, Replaces: 70207842 NOTE: See website for all applications. 1 set used per engine.
ACS3402 $58.75 Oil Pump Rotor Shaft fits: Same as ACS3420, Replaces: 70223531 (2.465" o/a length) NOTE: See website for all applications.
ACS3405 $2.75 Oil Pump Rotor Blade Spring fits: B, C, CA, D10, D12, D14, D15, H3, IB, RC gas, LP, Replaces: 70207838 (0.150" O.D., 1.140" free length) NOTE: 4 used per engine; Sold individually. See website for all applications.
ACS3408 $6.50 Oil Pump Spring Retaining Pin fits: B, C, CA, (D15 SN: 9001 & up), (H3 SN: 6001 & up), IB, RC gas, LP, Replaces: 70233390(0.625" o/a length) NOTE: 1 used. See website for all applications.
ACS3413 $1.60 Engine Oil Pump Pressure Regulating Spring fits: B, C, CA, (D15 SN: 9001 & up), (H3 SN: 6001 & up), IB, RC, Replaces: 70207839 (0.270" - 0.350" O.D., 1.140" free length) NOTE: 1 used per engine.
ACS3415 $4.95 Oil Pump Outer Cover Gasket Set fits: B, C, CA, IB, RC, Replaces: 70207840 (0.004" thick) NOTE: 1 or more used per engine depending on clearance. Sold in pairs.
ACS3418 $4.50 Oil Pump Outer Cover Gasket Setfits: D10, D12, D14, D15, H3, I40, I400, I60, I600, Replaces: 70228393 (0.004" thick) NOTE: 1 or more used per engine depending on clearance. Sold in pairs.
ACS3411 $3.25 Oil Pump Body to Cylinder Block Gasket fits: B, C, CA, D10, D12, D14, D15, H3, IB, RC gas, LP, Replaces: 70277273 ((4) - 3/8" mounting holes) NOTE: See website for all applications.
16 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Restoration quality mufflersOrder # Price Application
ACS067 $44.95
Fits: G, Replaces: 70800458NOTE: Exact of original. Not painted.
ACS082 $49.50 Fits: B, IB, C, CA (1938-57) (All w/ under the hood muffler), Replaces: 70210081NOTE: Aluminum high temperature paint.ACS082 dimensions: Inlet length: 1", Inlet O.D.: 1-1/2", Shell length: 4-1/4", Shell O.D.: 4" x 9", Outlet length: 3-1/2", Outlet O.D.: Bent pipe, Overall length: 9"
ACS3156 $54.50 Fits: B, C, CA (All w/ through the hood muffler), Replaces: 225341, 227240, 70227240NOTE: ACS3156 - Aluminum high temperature paint. If using All-Fuel manifold you must trim the tab to fit.
NOTE: ACS3168 - Stainless steel. If using All-Fuel manifold with instruction plate you must trim the tab to fit.
Muffler bracketFits: Early D17 gas, Styled WC, WD, WD45; Will also fit the B, C, CA, RC if customer trims approximately 1" off the length & redrill one hole if neededUSA made
Exhaust pipeFits: 190 gas, diesel, 190XT; Serviceable for D21, Replaces: 70244555, 70243284(3" I.D. inlet & outlet, 40" o/a length)USA made
Description Order # Price
Exhaust Pipe .........................................................ACS2233 ..........$39.99NOTE: Black finish.
Exhaust stacks - USA madeNOTE: Chrome; Double wall (Lined).
Order # Price Description / Application
ACS230(Straight)
$109.95
Exhaust Stack fits: B, IB, C, CA, RC, D10, D12, D14, (D15 up to SN: 9001) (All w/ through the hood mufflers)(3" O.D.; 24" body + 5" base = 29" overall)NOTE: For B - CA tractors w/ 2-1/2" hood exhaust hole, customer must enlarge the hole. For ACS230 use RCS015 raincap.
ACS231(w/ Bend)
$119.95
ACS187(Straight)
$109.95
Exhaust Stack fits: D17 gas except series IV, WC, WD, WD45 gas(3-1/2" O.D.; 22-1/2" body + 6-1/2" base = 29" o/a) NOTE: For ACS187 use RCS016 raincap.
Choke Rod fits: G, Replaces: 800118(27-1/8" o/a length) USA made
ABC423 $9.95Universal Choke Cable fits: Tractors, Forklifts & other applications using 72" or less cable (72" long) NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines.
ABC3210 $16.50Universal Engine Stop Cable (Diesel Fuel Shut Off) fits: Tractors, Forklifts & other applications using 96" or less cableNOTE: Nylon sheathed. Cut to length.
JDS718 $21.50 Universal Choke Cable fits: Tractors, Forklifts & other applications using 47" or less cable (47" long) NOTE: Metal sheathed w/ "CHOKE" on plastic knob. Cut to length.
18 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Choke parts cont...Order # Price Description / Application
ABC2426 $4.96 Choke or Fuel Shut Off Cable Clip (For Marvel Schebler carburetors)fits: D15 SN: 9001 & up, D17 SN: 42001 & up, D19, 170, 175, H3, I500, I600; Also works for diesel fuel cable shut off for 7000 - 7580, Replaces: 74047137 NOTE: See website for a complete listing of applications & carburetor numbers.
ACS2699 $7.95Choke Knob fits: D10 up to SN: 3501, D12 up to SN: 3001, D14, (D17 up to SN: 32001 as a fuel shut off knob)Replaces: 70228321 (1/4" - 20 thread, 1.035" O.D.) USA made
Carburetors, partsNOTE: Can't find your carburetor number? Look on page 368A.
Carburetors are limited to replacement only - NO refunds.
No replacement will be given if dirt, rust, etc. is found in the
carburetor or if it has been taken apart.
Order # Price Description / Application
IHS905 $399.95NEW! Carburetor (New, Zenith) fits: D10, D12, Replaces: 70235975; TSX 156, 157, 319; Zenith 9749, 9752, 12115, 12122, 12123, 12225, 12285, 12475, 12522, 12613, 12749, 14007 (2-3/8" c.c. stud holes)USA made NOTE: Direct bolt on. See website for all carburetor numbers.
ABC223 $395.25 Carburetor New, Zenith Replacement fits: B, IB, C, CA, D10, D12, Replaces Marvel Schebler TSX 154, 159, 305, 422, 470, 486, 670, 701, 815, Replaces: Zenith 9705, 9706, 9797, 9804, 11141, 11142, 12401, 12522, 12749 (2-5/16" c.c. stud holes)USA made NOTE: Has 1-1/8" throttle bore. May have to trim throttle shaft on some applications. Will fit manifolds w/ 2-5/16" - 2-3/8" c.c. stud holes because of the smaller dia. studs that are included.
ACS3571 $375.50
Carburetor (New, not Rebuilt) fits: WD45, (D17 up to SN: 42000), Replaces: Marvel Schebler TSX 464, 561, 773(2-3/8" c.c. mounting bolt pattern)
ABC297 $7.75 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: Allis Chalmers models(Male end (screen end) - 1/8" pipe thread; female end - 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting NOT compression fitting.
Carburetors, parts cont...Order # Price Description / Application
ABC564 $27.40 Main Jet Adjustment Needle Assembly (For Zenith carburetors) fits: D10, D12 both w/ carb 12401, 12577, 12749; WC, WD both w/ carb 9707, 10981, 14012Replaces: 70223897, Zenith 71-21(3/8"-24 thread) USA made
ABC557 $29.95 Main Carburetor Nozzle (For Zenith carburetors) fits: B, IB, C, WC, WF, WD (All w/ carb 9707, 9707A, 9707B, 10981, 10981A, S1203), Replaces: 70223893, Zenith C66-47-50 USA made
ABC513 $2.55 Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetors)fits: B - D15 (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size.
ACS3565 $58.95 Premium Carburetor Repair Kit (For Marvel Schebler carburetors) fits: WD45, D17 both w/ TSX 464, 561, 773, (TSX 797, 871 but must reuse choke shaft)
Diesel fuel lift pumpFits: 170 up to engine SN: 236U93188, 175 up to engine SN: 248U8332 both using 2 bolt mount lift pump, Replaces: 70251278
Description Order # Price
Diesel Fuel Lift Pump w/ Gasket ................ABC3471 ..............$24.95NOTE: Fuel outlet is at 6:00 position & the fuel inlet is at 12:00 position.
ACS3733 $19.99 NEW! Governor Gear Bushing fits: B, C, CA, D10, D12, D14, D15, H3, IB, RC gas, LP, Replaces: 207466, 210689, 70210689(.561" wide, 1.874" O.D., .062" thick) USA made NOTE: Mounts in front of the engine block. See website for all applications.
ACS3739 $9.99 NEW! Front Governor Shaft Bushing fits: B, C, CA, D10, D12, D14, D15, D272, H3, IB, RC gas, LP, Replaces: 207714, 70207714 (.437" I.D., .625" O.D., .496" o/a length) USA made NOTE: See website for all applications.
22 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Radiators, partsOrder # Price Description / Application
ACS2626 $450.00
Radiator (Pressurized) fits: GReplaces: 70800056
ACS128 $282.99 Radiator (Pressurized) fits: B, IB, C, CA, (D10 up to SN: 3501), D12 up to SN: 3001, Replaces: 70232113(CORE measurements: 14-3/4" height, 15" width, 2-1/4" depth. These are not overall dimensions)NOTE: Must use ACS209, ABC008 or ABC1396 radiator caps only.
ACS114 $345.65 Radiator (Pressurized) fits: Styled WC, WD, WD45 gas, WF Replaces: 70228587 (CORE measurements: 18-1/2" height, 18" width, 1-3/8" depth. These are not overall dimensions) NOTE: Will fit tractors w/ 4 blade fan only, not 5 blade fan. Fan shroud opening is 17-1/8" so customer may have to trim to clear or order ACS183 fan blade.
ACS109 $499.75Radiator fits: D17 gasReplaces: 70229702(CORE measurements: 19-1/4" H, 18" W, 2" D. These are not overall dimensions)
ABC455 $2.95Radiator Mounting Pad fits: Most Allis Chalmers models (2" x 2", 1/4" thick)NOTE: 2 used per tractor; Sold individually.
ABC209 $3.50Radiator Drain Plug fits: B - 8550Replaces: 912415 (1/4"-18 NPT)USA made NOTE: See website for full applications.
ACS192 $32.50Lower Water Pipe fits: B, IB, C, CA, RCReplaces: 70227184(1-1/4" O.D., 10")NOTE: Steel.
MHS045 $13.50Radiator Cap w/ Gasket (For Non-Pressurized system) fits: B up to SN: 101; Serviceable for B up to SN: 61222, C up to SN: 18580 - ACS172 is correct for these applications, Replaces: 70206459(1.761" tang length)
ACS172 $19.96 Radiator Cap w/ Gasket (For Non-Pressurized systems) fits: B up to SN: 61222, IB up to SN: 1000, C up to SN: 18580, RC, Styled WC, Styled WFReplaces: 70207244 NOTE: Original style. Fits original radiator only, not aftermarket. For gasket only use MHS043GK.
MHS043GK $1.50Gasket only (For ACS172)(2.622" O.D., 1.500" I.D., 0.100" thick)USA made NOTE: Rubberized cork gasket.
IHS337 $9.95 Radiator Cap w/ Gasket (For Non-Pressurized system) fits: Unstyled WC, Unstyled WF, W201 Power Unit, Replaces: 70206622(2.886" O.D., 0.398" tang width, 1.845" inside center dia.) NOTE: Fits on inside of neck. Check I.D. before ordering.
IHS913 $37.50 Thermostat fits the following equipped w/ 4-bolt water manifold bypass: B w/ engine SN: 126210 & up, C w/ engine SN: 60157 & up, CA w/ engine SN: 195136 & up; D10 - D17, WD45, 170, 175 gas, LPReplaces: 226505, 70229927 (160 degree Temp) NOTE: Pointed end goes down.
Thermostats, parts cont...Order # Price Description / Application
ABC1898 $19.95NEW! Thermostat fits: Same as IHS913Replaces: 70228543 (160 degree Temp) USA made NOTE: Gasket not available from STP, Inc.
ABC052 $11.50 Thermostat w/ Gasket fits: B, C CA, IB (All w/ cast iron 2 bolt thermostat housing, must reuse spacer spring); Late D17 diesel, D21, 180, 185, 190, 190XT, 210, 220, 6040, 7000 - 8070, Replaces: 70209720, 74025103, 72080437 (160 degree Lo-Temp)USA made NOTE: Gasket included fits Ford models only.
ABC1086 $12.50Thermostat fits: D10, D12, WC, WD, WFReplaces: 70210157 (180 degree Temp, 2-1/2" O.D.) USA made
ACS1214 $49.95 Thermostat Housing Bypass Cover fits: WD45, D17, 170, 175, (W226 Power Unit SN: PO97614 & up) gas; Combines: E3, K gas, Replaces: 70262804NOTE: If gasket is needed order ACS1571 gasket.
ACS1219 $49.95
Thermostat Housing Cover fits: WC, WD, WF, Replaces: 70262805 NOTE: If gasket is needed order ACS1571.
ACS1571 $6.50 Thermostat Housing Gasket only fits: D17, WC, WD, WD45, WF, 170, 175 (All w/ 201, 226 C.I. gas, LP)Replaces: 70210158 USA made NOTE: Cork.
Water pumpsNOTE: NEW; No core charge
Order # Price Application
ACS227 $114.50Fits: B, IB, C, CA, (Early D10, D12 w/ sheet metal pulley), RC, D14, (Early D15 w/ sheet metal pulley), RCReplaces: 70250397 NOTE: Will NOT fit engines w/ cast pulley.
ACS2795 $129.95Fits: Some D10, D12, D15 gas, LP & Industrials (All w/ FIXED cast iron pulley), Replaces: 233394, 79004256(3/8" belt pulley width) NOTE: Includes pulley, backing plate & gasket. See website for full applications.
ACS1833 $29.95 (60-0-60) fits the following converted to 12-v system: B - WD45, D10 - D21, 160 - 220 NOTE: Includes "Allis Chalmers" logo. See website for additional applications.
ABC466 $14.95
(60-0-60) fits: B - 220 w/ Alternator system (Terminal type) NOTE: No logo.
Oil pressure gauges w/ stainless steel bezelNOTE: ACS Gauges have a metal base, glass lens & stainless
steel bezel. Includes "ALLIS CHALMERS" name. For 2" diameter
hole. ABC Gauges have a stainless steel bezel & vary from
original appearance. Does not include "ALLIS CHALMERS"
name.
When ordering a dash mounted oil pressure gauge you also
need to order (1) of the following fittings depending on the
line size to adapt your existing line to the gauge: ABC538,
IHS626.
Order # Price Application
ABC004 $19.95(0-30 PSI) fits: B, IB, C, CA, G, RC, WC, WD, WD45, WF, Replaces: 70207834(1/8" NPT male thread) NOTE: Engine mounted. Screws into oil filter housing. No logo.
Water pumps cont...NOTE: NEW; No core charge
Order # Price Application
ACS229 $98.50
Fits: WC, WD, WD45 gas, WFReplaces: 70250396
ACS2799 $135.00Fits: D17, 170, 175 (All w/ Late 226 C.I. gas, LP engines), Replaces: 229465, 79003710 NOTE: Includes cast iron pulley, backing plate & gasket.
Fan bladeFits: D17 gas, diesel, WC, WD, (WD45 gas, diesel), WF, Replaces: 70240973(16-7/8" O.D. tip to tip, 3-7/8" blade width, 1" pilot, 1-1/4" c.c. bolt holes, 5/16" bolt hole dia.)
Description Order # Price
Fan Blade (4 Blade) ........................................ACS183 .................$22.30
Fan beltsNOTE: Verify belt size before ordering.
Order # Price Application
ABC009 $12.99 Fits: B, IB, C, CA, (D10 up to SN: 3501), (D12 up to SN: 3001), D14 (All w/ generators), Replaces: 70209656(5/8" x 36-1/2")
FDS1453 $12.50 Fits: 6060, 6070, 6080 (fan/alt)Replaces: 70263408 (1/2" x 53-1/4") USA made
Traction booster gaugeFits: CA, (D10 up to SN: 9199), D12 up to SN: 9167, D14, (D15 up to SN: 9000), D17 up to SN: 75000, D19, WD, WD45 Replaces: 70235598 (1/4" male flare end)
Description Order # Price
Traction Booster Gauge .................................ACS124 ................. $95.50 w/ "Allis Chalmers" name NOTE: Functional, like original!
ACS159 $29.95 (0-30 PSI) fits: B, C, CA, G, IB, RC, WC, WD45; Some U, UC both w/ SN: 15345 & up & w/ engine mounted oil pressure gauge, Replaces: 70203805, U3805(1/8" NPT male thread) NOTE: Engine mounted. Includes "Allis Chalmers" name.Screws into oil filter housing.
ACS160 $29.95(0-45 PSI) fits: D10, D12, D14, D15, D17, I-40, I-400, I-60, I-600 gas, LPReplaces: 70228718, 70228719(1/8" NPT male thread) NOTE: Dash mounted. Includes "Allis Chalmers" logo. Line adapter sold separately.
ACS262 $29.95 (0-80 PSI) fits the following gas: Some A, D19, (U, UC both up to SN: U15344 w/ dash mounted gauge); Fits the following diesels: D15, D17, D19, WD45Replaces: 70232546 (1/8" NPT male thread) NOTE: Dash mounted. Includes "Allis Chalmers" name. Line adapter sold separately.
ABC082 $19.95(50 PSI) fits: D10, D12, D14, D15, D17 series I, II, I-40, I-400, I-60, I-600, WD45 diesel, Replaces: 70228719(1/8" NPT male thread) NOTE: Dash mounted. No logo. Line adapter sold separately.
ABC005 $19.95
(80 PSI) fits: D15 diesel - 220Replaces: 70200197 (1/8" NPT male thread) NOTE: Dash mounted. No logo. Line adapter sold separately.
ABC523 $23.99 Oil Gauge Copper Line Kit (For tractors using 1/8" x 6' copper oil line)(6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor)NOTE: Use w/ ABC538 fitting.
ABC538 $13.95Oil Gauge Fitting (For gauges w/out removable fitting), Replaces: 919095(1/8" pipe thread to 1/8" compression)USA made NOTE: Brass. Use w/ ABC523 line kit.
IHS626 $12.95Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/4" compression) USA madeNOTE: Brass.
Water temperature gauges w/ stainless steel bezelACS Gauges have a metal base, glass lens & stainless steel
bezel. Includes "ALLIS CHALMERS" name. For 2" diameter hole.
ABC Gauges have a stainless steel bezel & vary from original
appearance. Does not include "ALLIS CHALMERS" name.
Order # Price Application
ACS064 $27.95
Fits: B, IB, C, CA, RC, WC, WD, WD45, WF, Replaces: 70213675 NOTE: Threads into radiator neck. Includes "Allis Chalmers" logo.
Tachometer / Operation Meter fits: D10, D12 both up to SN: 9000Replaces: 70232189 (tachometer), 70232177 (1 bracket), 70232176 (mounting clamp) NOTE: Has AC logo.
ACS312 $27.95 Tachometer Cable w/ Nylon Sheath fits: D10, D12 both up to SN: 9000Replaces: 70244104 (41-3/8" long w/ key)NOTE: Measure before ordering.
JDS1802 $39.95 Tachometer Cable w/ Nylon Sheath Serviceable for D10, D12 both up to SN: 9000 (43-1/8" long w/ key)NOTE: Measure before ordering.
ACS265 $72.95Tachometer / Operation Meter fits: D14, (D15 gas up to SN: 6630), D17 gas, I-40, I-400, Replaces: 70242376, 70276770, 70277450 NOTE: Has AC logo.
ACS289 $123.99
Tachometer / Operation Meter fits: D15 gas SN: 6631 & up, I-60, I-600Replaces: 70236777
ACS1228 $35.95Tachometer Cable w/ Metal Sheath fits: D14, D15 gas, Replaces: 70228767, (cable), 70261609 (key end)(47" long w/ key)
ABC1868 $21.10Auxiliary Male 2-Pin Connector Plug (For ABC395), Replaces: 70227303(3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins. Wires must be soldered or crimped.
ABC2285 $4.95Electrical Outlet Socket Boot fits: Tractors using single wire outletNOTE: 1 wire style. Does not fit ABC395.
Battery cables - USA madeHeavy Duty; Straight terminals
unless otherwised noted
EO = Eyelet Opening
L = Length
Order # Price Specifications
Ground Cables (Non-Insulated)
ABC401 $13.99 (2 Gauge, EO = 7/16", L = 6")ABC411 $17.30 (2 Gauge, EO = 7/16", L = 9")ABC405 $19.55 (2 Gauge, EO = 1/2", L = 13")ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14")ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19")ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24")
Insulated Battery Cables
ABC407 $16.99 (2 Gauge, EO = 3/8", L = 10-1/2")ABC415 $18.40 (2 Gauge, EO = 3/8", L = 12")ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2",
90 degree terminal ends)ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH
ENDS, L = 16-1/4")ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21")ABC419 $20.35 (2 Gauge, EO = 3/8", L = 27")
Battery boxes, parts - USA madeOrder # Price Description / Application
ACS063 $85.50Battery Box w/ Lid fits: GReplaces: 70800626(Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long)NOTE: Persian orange #1 powder coat.
Battery Box w/ Lid fits: B, C, CAReplaces: 70226026 (Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long)NOTE: Persian orange #1 powder coat.
ACS072 $85.75Battery Box w/ Lid fits: RC, WC, WFReplaces: 70224539 (Inside dimensions: 7-5/8" wide x 8-3/4" tall x 9-1/8" long) NOTE: Mounts on side of frame, Lid is not available separate.
28 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Battery boxes, parts - USA made cont...Order # Price Description / Application
ACS030 $84.50 Battery Box w/ Lid fits: WD, WD45 gasReplaces: 70224540 (Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long) NOTE: Persian orange #1 powder coat. Dash not included; must re-use old dash.
ACS193 $104.95
Battery Box w/ Lid fits: WD45 dieselReplaces: 70226951 (Inside dimensions: 9" wide x 8-3/4" tall x 14-1/16" long)
ACS195 $89.95
Battery Box w/ Lid fits: D10, D12Replaces: 70233332 (Inside dimensions: 7-3/16" wide x 8-3/4" tall x 9-3/4" long)
Battery boxes, parts - USA made cont...Order # Price Description / Application
ACS1509 $22.50Battery Box Side Cover fits: B, C, CA, D10, D12, D14, D14 AUX, W226, WD, WD45, Replaces: 70222525 NOTE: Persian orange #1 powder coat.
ACS063L $29.95 Battery Box Lid only fits: G, B, C, CA, D10, D12, WD, WD45 gasReplaces: 70210907 NOTE: Persian orange #1 powder coat.
FDS369 $23.75 Battery Hold Down fits: D17 gas up to SN: 24000 using Group 1 batteryReplaces: 70229487 (9-3/16" long x 7-1/16" wide; Mounting holes c.c. = 10-1/8") NOTE: 16 gauge steel. New & improved quality!
$19.99 Distributor Coil (Metal Housing) & Mounting Bracket fits: Allis Chalmers modelsABC011 Replaces: 70247333, Delco 1115379, D502ABC509 Replaces: 74514967, Delco 1115380, U505NOTE: ABC509 is internally resisted. See website for full applications.
ABC509(12-volt)
$19.99
ABC348 $49.95 HOT" Coil (55000-volts) fits: 12-volt systems NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor.
ABC3161 $4.95
Coil Bracket fits: Same as ABC011, ABC509, ABC348 USA made
ABC366 $7.95 Universal 12-volt Voltage Resistor fits: Allis Chalmers models, Replaces: 70241266 NOTE: Used to step down 12-volt battery. 2 terminal style. Reduces voltage to distributor points. 2.0 Ohms of resistance. Resistor gets very hot.
30 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Ignition parts cont...Order # Price Description / Application
Distributor Clamp
ABC2523 $6.95 Distributor Hold Down Clamp (For 3/8" hold down bolt) fits: B - 175 (All w/ distributor), Replaces: 70225344 NOTE: 2 used per engine; Sold individually. See website for additional applications.
Distributor Tags
ABC511(6-volt)
$14.45
Distributor Tag w/ (2) Rivetsfits: Tractors & Industrial using Delco Remy distributor (2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers.
ABC514(12-volt)
$14.45
Spark Plug Wiring Sets, parts
ACS287 $19.50 Spark Plug Wiring Set (Pre-assembled) w/ Straight Boots fits: B, IB, C, CA, D10, D12, D14, D15, D17, RC, WC, WD, WD45, 170, 175, I-40, I-400, I-60, I-600 (All w/ distributor), Replaces: 70225613, 70229867 USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene.
ACS1548 $34.90 Tailored Spark Plug Wiring Set fits: B, IB, C, RC (All w/ magneto), Replaces: 70213505 (4 wires measure 7", 9-3/4", 11-1/2", 12-1/2") USA made NOTE: Original type, cotton braid w/ copper wire. Preassembled.
ACS1552 $35.95 Tailored Spark Plug Wiring Set fits: B, C, CA (All w/ distributor), Replaces: 70225613 (5 wires measure 7-1/4", 9-3/4", 12-1/4", 16-3/4", 13" coil wire) USA made NOTE: Original type, cotton braid w/ copper wire. Preassembled.
FDS149 $12.50 Spark Plug Wiring Set w/ 90 degree Boots fits: G - 175 4-cyl. USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.
ACS228 $16.75 Spark Plug Wiring Set w/ Straight Boots fits: 4-cyl. models USA madeNOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.
ABC326 $20.35 Spark Plug Wiring Set w/ 90 degree Boots fits: 6-cyl. models, Replaces: 74512808 (35" long wires) USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.
Ignition parts cont...Order # Price Description / Application
Spark Plug Wiring Sets, parts cont...
ABC2863 $20.40 Spark Plug Wiring Set w/ Straight Boots fits: 6-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length.
ACS309 $28.50Wire Loom Holder fits: GReplaces: 70800260 (bracket), 70800261 (grommet) USA made
ABC1897 $1.55
Spark Plug Wire Grommet fits: GReplaces: 70800261
Spark Plugs (Autolite)
ABC168 $4.25 Fits: B, IB, C, CA, D10, D12, D14, Early D15, (D17 up to SN: 75000), G, H3, RC, WC, WD, WF
ABC168 specifications: 14 mm thread, 3/8" reach, 13/16" hex, Autolite 295, Plug Gap .030
ABC169 $7.95 Fits: K, L, M, UABC169 specifications: 7/8" x 18 mm thread, 5/8" reach, 15/16" hex, Autolite 3076, Plug Gap .030
ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, Autolite 405, Plug Gap .025
ABC183 $4.25 Fits: UCABC183 specifications: 14 mm thread, 3/8" reach, 13/16" hex, Autolite 306, Plug Gap .025
ABC171 $5.35 Fits: Some Industrial applicationsABC171 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 388, Hot heat range, Std Tip / Resistor, Plug Gap . 030
Ignition Tune-Up Kits
ACS110 $25.95 Ignition Tune-Up Kit w/ Rotor (For Delco distributor) fits: B, IB, C, CA, D10, D12, D14, (Early D15, Early D17 w/ 3/8" reach), G, H3, RC, WC, WD, WF (4-cyl.) gas, Replaces: 70243507, 70225736, 9001652 NOTE: Kit contains: Spark plugs, heavy duty points, condenser & rotor. Spark plug gap .030; Point gap .020.
ABC018 $10.75Ignition Tune-Up Kit w/ Rotor (For Delco distributors w/ clip held cap through 1963) fits: All 4-cyl. models; D19 6-cyl. wheel tractor; Combines: A, B, C, EReplaces: 70243507, 70225736NOTE: Kit includes points, condenser, rotor; Point gap .020.
31STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersIgnition parts cont...
Order # Price Description / Application
Ignition Tune-Up Kits cont...
ABC333 $10.75 Ignition Tune-Up Kit (For Delco-Remy systems w/ screw held cap) fits: Late D15, D17, 170, 175, 180, 185, 190, 190XTReplaces: 79001128, 79001168 USA madeNOTE: Kit includes heavy duty point set, vibration resistant condenser, rotor; Point gap .025.
FM04 $18.75 Point Set fits: FM-J, FM-J4-B3, FM-JE, JM-JG, FM-T (All w/ clockwise rotation & 2-pc. cap) NOTE: Point Gap .020. See our website for a full application listing.
FM02 $79.95 End Cap only fits: FM-J4, FM-J4B3, FM-OX4, FM-X4B3, FM-B1 (All w/ 2-pc. cap)USA made NOTE: This is just the end cap that the plug wires slide into.
32 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Generator parts cont...Order # Price Description / Application
ACS1913 $19.95 Lower Generator Bracket fits: B, C, CA, (D10 up to SN: 3500), (D12 up to SN: 3000), D14, (W226 Power Unit SN: 96714 & up), Replaces: 70210990 (6.080" o/a length, 1" wide, 0.250" thick, 2 holes = 0.375" O.D., 2 holes = 0.340" O.D.)USA made
ABC103 $10.85Generator Belt fits: M, Late U, UCReplaces: U424 (1/2" wide x 24-1/4" long)
ABC1207 $17.95 Generator Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Generator Housing) fits: B, IB, C, CA, RC, WC, WD, WD45, WF, Replaces: 1872638 (1-5/8" wide) USA made NOTE: Stainless steel.
ABC519 $14.45 Generator Tag w/ 2 Rivets fits: Tractors & Industrial using Autolite generator(2.300" o/a length, .732" wide, .145" dia. rivet hole, 2" c.c. rivet holes) USA madeNOTE: Anodized aluminum. Customer must stamp numbers.
ABC511 (6-volt)
$14.45
Generator Tag w/ (2) Rivets fits: Tractors & Industrial using Delco Remy generator(2.5" o/a length, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA madeNOTE: Stamped w/ raised letters. Customer must stamp numbers.
ABC514(12-volt)
$14.45
Voltage regulatorsOrder # Price Description / Application
ABC153 $32.95 6-volt (4 Terminal) Voltage Regulator (Saddle Mount) fits: B, IB, C, CA, WC, WD, WD45 gas, WF using Delco 1101357, 1101413 or 1101414 generators when used w/ ABC188 Voltage Resistor KitReplaces: 74514722 NOTE: Provides 2-unit positive ground generator mounted regulator.
ABC188 $45.55 Voltage Regulator Conversion Kit fits: B, IB, C, CA, WC, WD, WD45, WFUSA made NOTE: Used w/ ABC153 voltage regulator when replacing Delco-Remy cut-outs 1116766, 1116807, 1116809 or 1116816 & updating your generator system.
ABC152 $32.95 6-volt (4-Terminal) Voltage Regulator (Base Mount) fits: D10 up to SN: 3501, D12 up to SN: 3001, D14 up to SN: 19001 using Delco 1100025 generatorReplaces: 70228365, Delco 1119575
Voltage regulators cont...Order # Price Description / Application
Alternators, partsNEW not rebuilt • To convert 6-volt to 12-volt system.
For negative ground systems.
Order # Price Description / Application
ABC3551 $149.95 Mini 35 Amp Alternator w/ Pulley fits: Allis Chalmers models requiring a smaller dia. alternator for clearance(4-1/2" housing dia., 2-3/4" pulley O.D., 1/2" belt width) NOTE: For 12-volt negative ground systems only. Simple 1 wire alternator hook up: Run a wire from the alternator through the ammeter to positive side of battery. Must rev the engine to 800 - 850 RPM in order to self-excite. Includes instructions.
ABC2315 $34.95
Alternator Pulley (For ABC3551) (0.587" I.D., 1.437" o/a length, 3" pulley O.D., 5/8" belt width) USA made
ABC418 $99.95 63 Amp Alternator w/ Pulley fits: Allis Chalmers models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width)NOTE: For 12-volt negative ground systems only. Must rev engine to 800 - 850 RPM in order to self excite. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery!
ABC1426 $19.95
Pulley only (For ABC418) (.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width)
ABC495 $20.55
Pulley only (For ABC418) (.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width)
33STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersAlternators, parts cont...
Order # Price Description / Application
ACS2347 $49.95 Alternator Bracket Kit fits: B, IB; Serviceable for C, CA, but must trim 1" off lower end of adjustment bracket & redrill hole to clear drag link; Lower bracket only fits D10, D12, D14 USA made NOTE: Use w/ ABC418 alternator & w/ existing belt.
ACS2352 $59.10Alternator Bracket Kit fits: WC, WD, WD45, WF gas, LP USA madeNOTE: Use w/ ABC418 alternator.
ABC404 $34.95 Universal Mounting Kit fits: Allis Chalmers models NOTE: Used when switching from a generator to an alternator. Does not include top adjusting bracket. May have to be drilled or modified for your application.
ABC529 $23.50 Universal Top Adjusting Bracket fits: Allis Chalmers models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models.
ABC508 $5.35 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals) NOTE: Brass.
ABC506 $5.30 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) NOTE: Brass.
Starter Rod, Foot / Lever Switch & Levers
ACS342 $24.95Starter Rod fits: G , Replaces: 70800110(21-3/4" o/a length) USA made
Starter parts cont...Order # Price Description / Application
Starter Rod, Foot / Lever Switch & Levers cont...
ABC012 $11.95 Manual Starter Switch (Saddle Mount) fits: B, IB, C, CA, G, RC, WC, WD, WD45 gas, WF, Replaces: 70226128 (2 mounting holes, .190" I.D., 1-3/8" centers) NOTE: Will not fit Autolite starters.
ACS275 $7.95 Lever (For Push Rod-Type Starter Switch) fits: B up to SN: 113778, IB up to SN: 1878, C, RC, (WC SN: 74330 & up), WF SN: 1904 & up, Replaces: 70210172, Delco 1878153USA made
ACS277 $7.95 Lever (For Pull Rod-Type Starter Switch) fits: B SN: 113779 & up, IB SN: 1879 & up, CA, G, WD, WD45, Replaces: 70225587USA made
ABC066 $16.40 Manual Starter Switch (Base Mount) (For 7/8" hole) fits: A, IU, K, M, U, UC Replaces: U879, 23459, Delco 405C (Dash mount for 1-3/4" mounting hole) NOTE: Will work on 6-volt or 12-volt systems.
Starter Drive Housings, parts
ACS324 $69.45 Starter Drive Housing fits: B, IB, C, CA, Early D10, D12 w/ starter 1107471, D14 gas w/ starter 1107466, RC, WC, WD, WD45, WF (All w/ starter 1107006, 1107017, 1107024, 1107043, 1107044, 1107045, 1107046, 1107096, 1107951), Replaces: 1879156 NOTE: No returns if broken.
ABC1203 $17.95 Starter Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco starter housing) fits: B, IB, C, CA, (D10 up to SN: 3501), D12 up to SN: 3001, (D14 6-volt only), D15 diesel, RC, WC, WD, WD45 gas, WFReplaces: 7412626 (1-3/16" wide)USA made NOTE: Stainless steel.
ABC1939 $17.95 Starter Commutator (Brush) Band Cover (For 3-3/4" O.D. Delco starter housing) fits: G w/ Delco starter 1109605, 1109614Replaces: 1887889 USA madeNOTE: Stainless steel.
ACS1269 $53.85 Starter Drive Housing fits: D14 SN: 19001 & up, D15, H3 gas, LP (All w/ factory 12-volt starter 1107758 or 1109388)Replaces: 70233294, Delco 1948113(2.575" to center of mounting bolt locating hole, 3.775" to 1st edge of starter drive gear opening) NOTE: Dimensions are from end of nose cone where it bolts to starter. No returns if broken.
Starter parts cont...Order # Price Description / Application
Push Button & Push / Pull Switches cont...
ABC398 $8.20 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment w/ battery ignition(10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. This can be used on battery ignition systems only.
JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch fits: Ag & Light Industrial equipment w/ voltage regulator (10-24 NC knob thread)NOTE: 15 AMP, five terminals, fused, 7/16-20 stem, black plastic knob.
ABC065 $12.99Ignition / Key Switch w/ (2) Keys & Mounting Nut fits: B, C, CA, (D14 up to SN: 9500), WD, WD45, Replaces: 70225310 NOTE: 2 wire switch. May have to drill hole to 0.800" on some applications.
IHS760 $19.95 Ignition / Key Switch w/ (2) Keys & Mounting Nut fits: B, C, CA, (D14 up to SN: 9500), WD, WD45, Replaces: 225310USA made NOTE: 2 spade terminal switch. May have to drill hole to 0.800" on some applications.
ACS288 $37.40 Ignition / Key Switch w/ (2) Keys fits: D10 up to SN: 3500, D12 up to SN: 3000, D14 SN: 9500 & up, D15 up to SN: 9000, D17 up to SN: 75000, D19, D21 (All w/ Delco switch), Replaces: 70235785(.995" dia. threaded end) NOTE: Five spade terminals, .995" dia. threaded end. Will fit D10 & D12 w/ newer serial numbers but must use 70227195 washer (not available from STP) so switch will fit dash.
IHS950 $14.50 Field Resistor on Light Switch fits the following using original switch 208197 & cut-out system: B, IB, C, CA, G, RC, WC, WF, WD, (WD45 gas up to SN: 201241)
ACS139 $38.99 3-Position Light Switch (Hi-Lo-Charge) (Hi charge w/ lights) fits: B, C, CA, G, RC, WC, WD, WD45, WF (All w/ cut-out on generator), Replaces: 70208197(.800" dia. threaded stem, 10-32 thread)NOTE: Three screw type terminals.
ABC425 $4.95Knob only (Says "LIGHTS") (For ACS139)(10-32 thread)
ABC367 $4.95Knob only (Plain Face) (For ACS139)(10-32 thread)
Complete Headlight Assembly fits: B, IB, C, CA, (Late U, UC, UI using 4-3/4" dia. lights), Replaces: 70210921, 70210922 (1/2" dia. stud)NOTE: See light chart A for subcomponents.
ACS205(12-volt)
$49.50
ACS150 $49.50
6-volt Complete Headlight Assembly fits: RC, WC, WF, WD, WD45Replaces: 70236969 (4-3/4" curved lens)NOTE: See light chart A for subcomponents.
36 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Headlights, parts cont...Need light components? See page 38
Order # Price Description / Application
FDS213 $48.5012-volt Complete Sealed Beam Headlight Assembly Serviceable for D15 up to SN: 9001, D17 up to SN: 42001, H3, HD3Replaces: 70229915 (5-3/4") NOTE: Mounts to side of grille & not to fender.
IHS647 $29.95 12-volt Sealed Beam Headlight Assembly (For Flat Top Fenders) fits: 190XT, 170, 175, 180, 185, 190, 200, but not like original; 6040, 6060, 6080, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080Replaces: 70267185 (4-1/2") NOTE: Post is out of back w/ wires through post.
ABC3441 $64.6512-volt LED Trapezoid Headlight Assembly w/ Cree LED chips fits: Same as IHS647 (6 LED bulbs, 1/2" rear stud mount, 4-1/2" dia. bulb) NOTE: Will update your tractor to LED technology.
Headlights, parts cont...Order # Price Description / Application
ABC3500 $64.6512-volt LED Flood Light Assembly w/ Cree LED chips fits: Same as IHS647(6 LED bulbs, 1/2" rear stud mount, 4-1/2" dia. bulb) NOTE: Will update your tractor to LED technology.
ABC3514 $39.5012-volt LED Flood Light Assembly w/ Bridgelux LED chips fits: 12-volt applications (1 bolt bottom mount for 0.335" mounting hole) NOTE: 60 degree flood beam pattern. See website for all specifications.
ABC353(Lo Beam)
$9.50
12-volt Sealed Beam Lampfits: Same as ABC525, IHS647ABC353 Replaces: 4411, 70230232ABC460 Replaces: 4410(4.365" O.D.)
ABC460(Hi Beam)
$16.50
ABC3474(Trapezoid pattern)
$46.50
12-volt Cree LED Lampfits: Same as ABC525, IHS647, JDS581, JDS582, ABC3441, ABC3500, ABC3514ABC3474 Replaces: 4411ABC3490 Replaces: 4410(4.50" O.D.)
ABC3490(Flood pattern)
$46.50
ABC3028 $12.50 Light Bezel (For 'Hobbs' style light w/out glare guard) fits: Same as IHS647Replaces: 70269431 (5.250" O.D., 3.675" I.D., 1.125" wide, 3 outer tabs to attach rubber ring to light housing & 4 inner tabs to secure to sealed beam)NOTE: Rubber.
ABC3035 $21.90Light Bezel (For 'Hobbs' Late style w/ glare guard) fits: Tractors w/ 'Hobbs' round lights & 5.250" O.D. bezel when extended glare guard bezel is desired (5.250" O.D., 3.675" I.D., 2.430" wide, 3 outer tabs & 4 inner tabs)NOTE: Rubber. Will fit IHS647.
ABC527 $4.95
Concaved Mounting Washerfits: Same as IHS647(2-1/4" O.D., 9/16" center hole)
6-volt Bulb, Single contact ............................ABC344 ................$1.80
12-volt Bulb, Single contact ..........................ABC345 ................$1.95
Dash Light Cover only .................................. JDS589CH ...........$15.45
Tail lights, partsNeed light components? See page 38
Order # Price Description / Application
ACS264V6(6-volt)
$42.50
Bullet Style Tail Light Assembly fits: G, B, C, CA, (D10, D12 both up to SN: 9001), (D14 up to SN: 19000), WD, WD45, Replaces: 70228377 NOTE: See light chart C for subcomponents.
ABC3538 $49.7512-volt LED Fender & Cab Warning Light w/ amber & red lenses fits: Tractors & equipment w/ 12-volt systems (4" dia. lense & 1/2-20" mounting stud) NOTE: See website for dimensions & detailed information.
ABC3899 $9.95 NEW! 12-volt Positive Ground LED Flasher Unit fits: Tractors, Combines, Industrials using LED warning lights(.230" dia. single bolt mount, 1 to 150 watt, compact 1.090" across x 1.630" tall w/ 2 spade connections) NOTE: One flasher can flash (4) lights simultaneously or order (1) flasher per light for separate flashes. Use w/ ABC3538 LED light
ABC546 $28.00 12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base Serviceable for Allis Chalmers models (All using rectangular warning light) (4-1/2" dia.)
ACS220(Lens)
$18.95 Tail Light Lens w/ Guide Name or Gasket fits: D14 SN: 19001 & up, D15 up to SN: 9001, D17 gas up to SN: 42001 & diesel up to SN: 38964ACS220 Replaces: 70229795NOTE: Red plastic.
ABC541 $18.70 Combo Tail light Switch w/ Lever Style Knob
ABC536 $6.50 Lever Style Plastic Knob
ACS123 ABC1979
OLS071ABC344ABC345
OLS072
Light chart CThe light subcomponents below fit ACS264V6, ACS264V12:ACS123 $14.95 Red Glass Tail Light Lens
OLS071 $9.95 Trim Ring
OLS072 $2.00 Gasket USA madeABC1979 $1.45 Base Gasket (For Bullet Tail Light)
ABC344 $1.80 6-volt Bulb, Single contact
ABC345 $1.95 12-volt Bulb, Single contact
Ele
ctri
cal p
arts
Need just a lens, bulb or gasket? This is the place for you. For application information see the light assemblies on the previous pages or go to www.SteinerTractor.com
39STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersEmblems
Order # Price Description / Application
ACS135 $29.95
Front Grille Emblem fits: D10 up to SN: 1950, D12 up to SN: 1950, D14 up to SN: 19000, D17 up to SN: 24000; Combines: A2, C, E, E3, F, K; Lawn & Garden: 116, 122, 616, 622, Replaces: 70228474NOTE: Die cast, chromed, painted orange. Orange used through mid 1959.
ACS138 $29.95Front Grille Emblem fits: D10 SN: 1951 & up, D12 SN: 1951 & up, D14 SN: 19001 & up, D15, (D17 SN: 24001 & up), D19, D21, ED40; Combines: A2, C, E, E3, F, K; Lawn & Garden: 616, 622, Replaces: 70233852NOTE: Die cast, chromed, painted creme. Creme used from mid 1959 to approx. 1965 then used ACS218.
ACS218 $60.95
Front Grille Emblem w/ Decal fits: Late D10, D12, D15, D17, D21, ED40, EIII Gleaner Combine (Approx. 1965 & up)Replaces: 70246724 USA madeNOTE: Die cast, chromed.
ACS247 $69.99Side Nameplate (Emblem) fits Ag: D10, D12, D15, D17 (1961-63) Replaces: 70233854 (3" wide x 29" length)NOTE: Creme background w/ black lettering. 2 required per tractor; Sold individually. Rivets & clips not included.
ACS248 $69.99 Side Nameplate (Emblem) fits Industrial: D10, D12, D15, D17, I-40, I-400, I-60, I-600, 616, 622, 801, 802 (1961-63)Replaces: 70242700 (3" wide x 29" length)NOTE: Black background w/ polished aluminum lettering. 2 required per tractor; Sold individually. Rivets & clips not included.
ACS1567 $0.99 Rivet only (For ACS247, ACS248) fits: D10, D12, D15, D17, I40, I60, I400, I600, 616, 622, 801, 802 Replaces: 70234173 USA made NOTE: 7 required per nameplate; Sold individually.
JDS630 $0.60
Push Clip only (For ACS247, ACS248)USA made NOTE: 7 required per nameplate; Sold individually.
Hand cranks, partsOrder # Price Description / Application
ACS133 $52.50
Hand Crank w/ Spinner fits: GReplaces: 70800646 USA made
ACS133B $22.50
BACK IN STOCK! Hand Crank Bracketfits: G, Replaces: 70800068 USA made
ACS058 $24.50
Crank Hole Casting fits: GReplaces: 70800086
ACS350 $52.50
Hand Crank w/ Spinner fits: B, C, CAReplaces: 70207893 USA made
41STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersAir cleaner parts cont...
Order # Price Description / Application
Caps, parts cont...
IHS283 $51.95Air Cleaner Cap fits: D17 gas SN: 42001 & up, D19 gas, Replaces: 70235918(2-1/4" I.D., 2-3/8" O.D.) USA made
ABC422 $13.35 Air Cleaner Oil Bath Filter Element (3" wide x 78" long) NOTE: Replaces the mesh in existing air cleaners. Sold by the bag (usually 2 required for B - D14; 3 required for WC - WD).
Oil Cups, parts
ACS115 $23.60 BACK IN STOCK! Air Cleaner Oil Cup (Clip-Style) fits: B, C, CA, G (All w/ clip mounted cup), Replaces: 70225818, 70800760
ACS047 $18.50
Air Cleaner Oil Cup (Clamp-Style) fits: B, IB, C, CA, RC, Replaces: 70225857(4" I.D.; 4-7/16" O.D.)
IHS181 $9.95
Air Cleaner Oil Cup Clamp (For ACS047)Replaces: 70225858
FDS034 $14.95 Air Cleaner Oil Cup (Clamp-Style) Serviceable for Early D10 up to SN: 3501, Early D12 up to SN: 3001, D14 Replaces: 70228478 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) NOTE: Looks slightly different, but works great.
FDS081 $11.50
Clamp (For FDS034)Replaces: 70225858
Pipe, parts
ACS117 $54.50
Air Cleaner Pipe fits: GReplaces: 800147 NOTE: If hoses are needed order (2) ACS208 hose.
ACS340 $18.50
Air Cleaner Pipe Bracket fits: GReplaces: 70800142 USA made
ACS1719 $21.50 Air Cleaner to Carb Hose fits: WD45 gas, W226 Power Unit both SN: 96714 & upReplaces: 70226266 (1-7/8" I.D. both ends, 8-7/16" outside curved length)
ABC492 $2.85Clamp (For 1-5/8" O.D. hose) fits: GReplaces: 911290 NOTE: Will fit ACS208 radiator hose.
FDS258 $3.60Clamp (For 1-3/4" to 2" O.D. hose) fits: B, C, CA, D10, D12, RC, WC, WD, WFReplaces: 921913
Pre-Cleaner Cap Assembly fits: D15 diesel up to SN: 9000; Serviceable for ED40 & others (All w/ 2" I.D. base & 5-1/2" bowl)Replaces: 74016565 (2" I.D. plastic base, 5-1/2" pre-cleaner O.D.) USA made
ABC383 $79.75
Pre-Cleaner Cap Assembly fits: D17 gas & others (All w/ 2-1/4" I.D. base & 7" bowl)Replaces: 70257382, 70234832 USA made
ABC512 $74.95
Pre-Cleaner Cap Assembly fits: Allis Chalmers models (All w/ 2-1/2" I.D. base & 7" bowl) USA made
ABC484 $24.95 Pre-Cleaner Bowl fits: D15 diesel up to SN: 9001, HD3, I-60, I-600 diesel (All w/ 5-1/2" dia.), Replaces: 70233663NOTE: Check measurements before ordering. Clear plastic.
ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom = 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16", Overall height = 3-9/16"
JDS559 $24.95 Pre-Cleaner Cover w/ Brass Nut fits: D17 gas up to SN: 42001, diesel up to SN: 38964; Combines: A - F2 (All w/ 7" dia. bowl), Replaces: 71125803 NOTE: Powder coat green.
ABC338 $13.95 Pre-Cleaner Bowl (For 2" to 3" inlet) fits: D17 gas up to SN: 42001, diesel up to SN: 38964; Combines: A - F2Replaces: 71125804, Can replace Donaldson bowl P020227NOTE: Clear plastic.
ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8"
JDS557 $68.95Pre-Cleaner Base (For ABC338 bowl & JDS559 top) fits: Combines; K2 diesel, F2, (G, L, M gas) (All w/ 3" I.D. base & 7" bowl) NOTE: Metal. Check size before ordering.
Fuel Tank fits: G, Replaces: 70800070USA made NOTE: Close out. Steel. Sealed w/ Red Kote® fuel tank liner.
MIS129 $67.20 Fuel Tank Liner Kit USA madeNOTE: Seals tanks up to 12 gallons. Includes all of the products necessary to successfully clean, prep and line your tank. Once lined, pinhole leaks will be sealed & future rust will be prevented. Fuel tank liner kit ships in own box. 1 kit per box. Can not be sold in the state of CA. For CA residents we can special order a low V.O.C. acetone formula.
MIS106 $29.95 Fuel Tank Liner only (1 quart can)ABC2672 $124.95 Fuel Tank Filler Neck Straightening
Tool w/ Instructions fits: A, (Early D17 using "Buy Clean Fuel" cap), M, U, UC, (Unstyled WC, WF up to SN: 2045)USA made NOTE: Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks). This part is a duplicate of the factory service tool that works in many applications using the ABC1880, IHS226, IHS416 & JDS416 caps.
43STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersFuel tank, parts cont...
Order # Price Description / Application
ABC494 $3.95 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 1" wide x .042" thick) USA madeNOTE: Economy black woven nylon. Sold in 3-foot length. Can be glued or riveted.
ABC1823 $4.95 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 1" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.
ABC1656 $5.25 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 1-1/2" wide x .050" thick)NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.
ABC1827 $5.60 Fuel Tank Webbing fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts(3' L x 2" wide x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Can be glued or riveted.
IHS338 $9.95 Auxiliary (Starting) Tank Fuel Cap w/ Gasket fits: B, C, CA, D14, D17, U, WC, WD, WD45, WF, Replaces: 70204827(1-3/4" I.D., 1-3/8" tang to tang)NOTE: Has (2) tangs on top mounted from center out.
ABC092 $27.95 Sediment Bowl Assembly fits: B, C, CA, D14, (D15 gas up to SN: 9001), D17 gas up to SN: 42000, D19 gas up to SN: 12000, IB, I-40, I-400, I-60, I-600, RCReplaces: 70237944 (3/8" pipe inlet, 1/8" pipe outlet, 1.280" long bowl. Includes 5/16" compression adaptor fitting)
ABC002 $29.95 Sediment Bowl Assembly fits: D10, D12, D14, WC, WD, WD45, WF, (170 gas SN: up to 7500), Replaces: 70239167(Includes shallow bowl w/ 3/8" pipe inlet, (2) 1/8" pipe outlets) NOTE: For tractors w/ (1) outlet use ABC092 sediment bowl assy.
ACS326, ABC092, ABC002 components
The following parts (sold separately) will fit ACS326, ABC092,
ABC490 $6.45In Line Fuel Filter w/ Hose & Clamps fits: Allis Chalmers models using a 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor.
ABC1315 $8.80 Fuel Tank Screen fits: Most Allis Chalmers models w/ stem style sediment bowl. Will fit ABC092, ABC281 sediment bowl assemblies (.375" screen O.D., .216" pipe O.D., 2.530" o/a length)USA made NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281 customer must drill sediment bowl stem out.
ABC1423 $32.45 Diesel Single Fuel Filter Assembly w/ Glass Bowl fits: 160, 170, 175, 5040, 5045, 5050, Replaces: 72089560 ((4) 1/2" x 20 UNF ports) NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded.
ABC1421 $5.50 EACH Diesel Fuel Filter Element w/ Seals
(For Cav/Simms diesel fuel filters) fits: 160, 170, 175, 5040, 5045, 5050, 6040, 6140, Replaces: 70251397, Cav 7111/296(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)NOTE: Sold individually.
ACS1974 $29.95 Fits: B, C, CA, IB, D10, D12Replaces: 70207278, 70215478, 70243108(13-1/8" o/a length, 1/4" tube O.D., 1/4" compression fittings)NOTE: May have to trim to fit.
ACS346 $349.95 Clutch Kit fits the following w/ 8-1/2" dia. clutch: B, IB, C, CA, Replaces: 70226262 (pressure plate), 70226729 (clutch), 70227704 (throw out bearing), 70206968 (pilot bearing) (8-1/2", 1-1/8" dia. spline, 10 splines, pressure plate mounting holes spaced in groups of 2) USA made NOTE: Includes new 8-1/2" woven clutch disc, pressure plate, throw out bearing & pilot bearing. Measure clutch prior to ordering. Please note this does not include a pilot bushing. Some tractors require a bushing instead of a bearing. We have a bushing available it is sold separate, see IHS3264.
46 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
sC
has
sis
par
tsClutch, transmission parts cont...
Order # Price Description / Application
ACS2470 $158.50 Clutch Kit fits the following w/ 9" dia. standard (not heavy duty) clutch: Some early B, C, CA, (D10 up to SN: 3501), (D12 up to SN: 3001), D14, D15 Replaces: 70206968 (9" dia., 1-1/8" - 10 splined hub, pressure plate mounting holes spaced in groups of 2) NOTE: Includes new 9" woven clutch disc, pressure plate, throw out bearing, pilot bearing & clutch lineup tool. Measure clutch prior to ordering. Please note this does not include a pilot bushing. Some tractors require a bushing instead of a bearing. We have a bushing available it is sold separate, see IHS3264.
ABC3502 $38.45Clutch Disc fits: Same as ACS2470Replaces: 70207784 (9" O.D., 10 splines, 1-1/8" spline I.D., solid center) NOTE: Measure before ordering as 2 different diameters were used.
ABC496 $19.95 Clutch Throw Out Bearing fits: B, C, CA, D14, D15, D17, D19, ED40, H3, H4, HD3, HD4, 180, 185, 190, 190XT, 200; Combines: A, A2, C, C2, F, F2, F3, L up to SN: 4316, M, M2, M3, Replaces: 70235079(2.078" I.D., 0.801" thick, 3.269" face dia.)NOTE: Measure before ordering.
IHS3264 $7.95 Clutch Pilot Bushing fits: B, IB, C, CA, (D10 up to SN: 3501), D12 up to SN: 3001, D14, D15 gas, LP, Replaces: 206968, 70228255, 70228188 (0.875" I.D., 1.125" O.D., 0.995" long) USA made
ACS189 $14.95
Clutch Inspection Cover Plate w/ Spring Steel Clips fits: B, IB, C, CA, D10, D12, D17, D19, Replaces: 70208465
ACS270 $12.99 Clutch Pedal Return Spring fits: B up to SN: 124037, (IB up to SN: 2836), C, (CA up to SN: 30611), Replaces: 70225646(4.300" o/a length, .100" wire dia., .750" body dia.) USA made
ACS305 $13.75 Clutch Pedal Return Spring fits: B SN: 124037 & up, IB SN: 2836 & up, CA SN: 30611 & up; D10, D12 both up to SN: 9001Replaces: 70226310 (5.573" o/a length, 0.100" wire dia., 0.750" body dia.)USA made
MHS076 $29.95
Clutch Disc only fits: GReplaces: 70800662(6-1/2" dia., 15/16"-10 spline)
Clutch, transmission parts cont...Order # Price Description / Application
ABC550 $85.95 Pressure Plate only (New, not rebuilt) fits: G, Replaces: 70800027 (6-1/2" dia.) NOTE: Must recheck clutch adjustment & clearance after installation. No returns if broken.
ACS076 $28.00
Clutch Throw Out Bearing fits: GReplaces: 70800041 (1.500" center hole)
IHS730 $7.50 Clutch Pilot Bushing Serviceable for GReplaces: 70800312 (0.815" O.D., .625" I.D., 1.000" length) USA madeNOTE: May have to shorten to 0.895".
ABC2974 $175.50NEW! Pressure Plate only fits: WC, WD, WF, (WD45 to SN: 99647)Replaces: 70208286, 70230506(10" O.D., 6 springs)
ACS2982 $194.50 NEW! Pressure Plate only fits: WD45 SN: 99648 & up; Will also fit WC, WD, WF, Early WD45 when heavy duty pressure plate is desired, Replaces: 70230424, 70230506 (10" O.D., 9 springs) USA madeNOTE: Six mounting holes are equally spaced.
ABC2937 $9.95 Clutch Pilot Bearing fits: Some B, C, CA when using a bearing instead of a bushing; WD, WD45, D17, D19, D21, 170 - 220, 7000, Replaces: 226859, 70226859(0.984" I.D., 2.047" O.D., 0.590" wide)NOTE: Sealed bearing.
47STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersClutch, transmission parts cont...
Order # Price Description / Application
ACS1507 $14.95Clutch Inspection Cover Plate w/ Spring Steel Clips fits: D14, D15 Replaces: 70227610 NOTE: Primer paint.
ACS2972 $317.75 Clutch Kit fits: WC, WD, WF, (WD45 up to SN: 99647), Replaces: 70226859 (pilot bearing), 70204829 (throw out bearing), 70226764, 70227074 (clutch), 70230506, 70208286 (pressure plate) (10" dia., 1-1/4" - 10 splined clutch hub, 6 spring pressure plate; pilot bearing - 0.984" I.D., 2.047" O.D.) NOTE: This clutch kit includes a new pressure plate, new clutch disc, throw out bearing & pilot bearing. Does not include pilot bushing used instead of bearing on WC & WF.
ACS2978 $357.95 Clutch Kit fits: WD45 SN: 99648 & up gas, LP, diesel; Will also fit WC, WD, WF, Early WD45 when heavy duty pressure plate is required, Replaces: 70226859 (pilot bearing), 70204829 (throw out bearing), 70226764, 70227074 (clutch), 70232594, 70230424 (pressure plate)(10" dia., 1-1/4" I.D. - 10 splined clutch hub, 9 spring pressure plate; pilot bearing - 0.984" I.D., 2.047" O.D.) NOTE: This clutch kit includes a new pressure plate, clutch disc, throw out bearing & pilot bearing.
ABC2501 $21.95 Clutch Throw Out Bearing fits: D17 SN: 75001 & up, 170, 175, 210, 220, 7000Replaces: 70260803 (2.490" I.D., 4.060" O.D., 0.870" wide) NOTE: Sealed bearing, no need to grease.
ACS321 $12.50Clutch Pedal Return Spring fits: D21Replaces: 70239262 (4.590" o/a length)USA made
Main Shaft Drive Gear fits: GReplaces: 70800377NOTE: 41 teeth. Close out.
Clutch, transmission parts cont...Order # Price Description / Application
ACS282 $165.75 Reverse Pinion Shaft Gear fits: Late CA SN: 13291 & up; D10 SN: 7760 & up (To fit older must also use ACS285); D12 SN: 6091 & up (To fit older must also use ACS285); D14 up to SN: 19001; D15 SN: 17565 & up (To fit older must also use ACS285), Replaces: 70241367(1.092" total width) NOTE: 30 teeth.
ACS285 $148.50 3rd Pinion Shaft Gear fits: Late CA SN: 13291 & up; D10 SN: 7760 & up (To fit up to SN: 7759 must also use ACS282); D12 SN: 6091 & up (To fit up to SN: 6090 must also use ACS282); D14; D15 SN: 17565 & up (To fit up to SN: 17564 must also use ACS282), Replaces: 70234575NOTE: 37 teeth.
ACS048 $36.50Transmission Bushing fits: CA, D10, D12, D14, D15, Replaces: 70227316 (1-1/8")NOTE: Close out.
ABC1628 $14.95Transmission Input Front Main Shaft Seal Fits: B, C, CA, (D10 up to SN: 3500), D12 up to SN: 3000, Replaces: 70206538(1.187" I.D., 2.004" O.D., 0.250" width)
Hydraulic Lever Knob fits: CA, D17, GSnap Coupler Lever Knob fits: D10 - D15, WD, WD45Seat Base Knob fits: 180, 185, 190, 190XT, 200, 210, 220
Order # Price
ABC221 $4.75 Knob (Bakelite) Replaces: 70206456 (3/8"-24 NF)USA made
Description / Application
Brake Lever Knob fits: B up to SN: 1101Final Drive Clutch Knob fits: CAPTO Lever Knob fits: RC, WC, WD, WD45Transmission Lock Out Lever Knob fits: RC, WC
Order # Price
ACS2509 $17.15
Knob (O.E.M.) (Rubber) Replaces: 70233770USA made
Description / Application
Shift Range Lever Knob fits: D10, D12, D19, 170, 190Hydraulic Lever Knob fits: D10 SN: 3501 & up, D12 SN: 3001 & upPTO & Shift Lever Knob fits: I40, I400
Order # Price
ACS202 $5.85
Knob (Rubber) Replaces: 70226023
Description / Application
Gear Shift Lever Knob fits: B SN: 120982 & up, IB SN: 26006 & up, C, CA SN: 8971 & up, D10, D12, D14, D15, D17, D19, D21, late WD SN: 127007 & up, WD45, WD45D, 170, 175, 180, 185, 190, 190XT, 200 up to SN: 4001, 210, 220PTO Lever Knob fits: 180 & 185 w/out Clutch PackThrottle Lever Knob fits: Some Allis Chalmers models
50 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
sC
has
sis
par
tsSteering wheels, parts cont...
Order # Price Description / Application
ACS134 (Black)
$49.50
Steering Wheel fits: D10, D12, (D14 SN: 19001 & up), D15, (D17 SN: 24001 & up), D19, D21; Combines: A2, C, E, E3, F, KACS134 Replaces: 70232033ACS137 Replaces: 70233851(17-1/2" dia., splined hub, 36 splines, 7/8" shaft, 3 COVERED TO CENTER spokes) NOTE: Black wheel used through mid 1959. Creme wheel used mid 1959 & up.
ACS137(Creme)
$49.50
ACS135 (Orange)
$29.95
Steering Wheel Cap fits: Same as ACS134, ACS137, Replaces: 70233852NOTE: Die cast, chromed, painted. Orange used through mid 1959. Creme used from mid 1959 to approx. 1965 then used ACS218.
ACS138(Creme)
$29.95
ACS216 $60.95Steering Wheel Emblem fits: D14 SN: 19001 & up, D15, (D17 SN: 24001 & up) (All w/ power steering) Replaces: 70232712 USA made
ACS068 $98.95Steering Shaft fits: B, IB both SN: B-101 & up, G (All w/ Ross steering box)Replaces: 70211001, 70255675(7.225" o/a length, 0.998" shaft O.D.) NOTE: Single prong, rides in worm.
ACS3048 $23.50 Steering Levershaft Pin fits: Same as ACS068 (0.919" o.a. length, fits 0.375" hole) USA made NOTE: For Ross steering box only. Old pin must be machined out.
ABC2962 $8.50 NEW! 11-pc. Steering Worm Shaft Ball Kit fits: G, Replaces: 70915904 (5/16" chrome steel, Grade 25) USA madeNOTE: 2 kits used per tractor.
JDS2966 $15.50 NEW! Steering Worm Shaft Race fits: G, Replaces: 70210467, 70249977(1.625" O.D., 0.840" center hole dia., 1.403" I.D., 0.335" wide) USA madeNOTE: 2 used per tractor; Sold individually.
ACS341 $74.95Steering Shaft Tube w/out Bushing fits: B w/ Ross steering boxReplaces: 70210472 (40-15/16" length, 1-1/2" O.D.) USA made
ACS343 $74.95Steering Shaft Tube w/out Bushing fits: C w/ Ross steering boxReplaces: 70219390 (40" o/a length, 1-1/2" O.D.) USA made
ACS337 $64.95Steering Shaft Tube w/out Bushing fits: G, Replaces: 70800097(50-1/2" length, 1-1/2" O.D.) USA made
ABC2507 $16.75 Steering Shaft Cross & Bearing (U-Joint) fits: D14, D15, D17, D19, (RC, WC, WF when using later style joint), WD, WD45Replaces: 70224890 USA made NOTE: 1 to 4 used per tractor; Sold individually.
ABC167 $98.95 Universal Steering Joints Repair Kit w/ Yokes, Pins & Grease Fitting fits: RC, WC, WD, WD45, WD45D, Replaces: 70202152(7/8" & 1" dia. shaft, .750" dia. u-joint caps) USA made NOTE: Must redrill pin holes to fit shaft. Check measurement before ordering.
Steering parts cont...Order # Price Description / Application
ABC280 $139.50 Universal Steering Joints Repair Kit w/ Yokes, Pins & Grease Fitting fits: Late WC, WD, WD45, WD45D, Replaces: 70224825 (7/8" & 1" dia. shaft, .936" dia. u-joint caps) USA made NOTE: Heavy duty; loader use. Must grind yokes for clearance. Check measurement before ordering.
Power steering partsOrder # Price Description / Application
ABC1233 $385.00 Belt Driven Power Steering Pump (For tractors using Eaton style pump) fits: Allis Chalmers modelsReplaces: Eaton P761, 20928, 503-1003, 503-1005-005 NOTE: For 5/8-18" male inverted flare pressure line. Can be adapted to tractors using Char-Lynn power steering w/ Eaton pump. Does not include brackets, reservoir or pulley.
ABC3275 $18.5010-pc. Eaton Power Steering Pump Seal & O-Ring Kit fits: WD, WD45 both w/ Eaton belt driven power steering pumpNOTE: Includes filter o-ring. Fits ABC1233.
ABC3277 $12.50 Power Steering Pump Filter fits: WD, WD45 both using Eaton belt driven power steering pump, Replaces: 7304(1.020" I.D., 2.990" O.D., 1.610" thick)USA made NOTE: Reservoir gasket / o-ring not included.
FDS1274 $49.95 Power Steering Pump Pulley fits: Allis Chalmers models (All using Eaton belt driven power steering pump) (3.750" O.D., .671" bore, 1/8" keyway, .500" wide belt groove) NOTE: Cast iron.
ABC1417 $37.95Power Steering Pump Pulley fits: Allis Chalmers models (5" O.D., 0.675" bore, 1/8" keyway, 0.9715" total width for 1/2" belt) USA made
ABC414 $10.95Power Steering Pump Belt fits: D17 SN: 42001 & up gas, Replaces: 70237386(1/2" x 41-1/4") NOTE: Verify belt size before ordering.
ABC1414 $48.75 Power Steering Pump Port Block fits: Allis Chalmers models w/ Eaton style pump w/ separate reservoirReplaces: Eaton 20925, AG33547A USA made
52 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
sC
has
sis
par
tsPower steering parts cont...
Order # Price Description / Application
ABC1419 $4.95
Bolt (For ABC1414), Replaces: Eaton 14126 USA made NOTE: Yellow zinc; Grade 8.
IHS338 $9.95 Power Steering Reservoir Cap w/ Gasket fits: WD45 gas, diesel, Replaces: 70204827(1-3/4" I.D., 1-3/8" tang to tang)NOTE: Has (2) tangs on top mounted from center out.
IHS555 $859.95Char-Lynn Power Steering Torque Generator w/out port block fits: WD, WD45 (7/8" shaft )
Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended Fluid Input - 3 to 4 GPM
IHS673 $71.50
Port Block only (For IHS555)USA made
ABC380(Original)
$98.50
Char-Lynn Power Steering Slip Fit Coupler (For IHS555)ABC380: (3-3/8" to 3-1/2" adjustable length)
ABC497: (2-5/8" o/a length)USA made
ABC497(Economy)
$18.50
IHS740 $223.35 Power Steering Priority Flow Control Valve fits: Allis Chalmers models w/ LIVE hydraulics (1/2" NPT inlet, 3/8" NPT return, 1/2" NPT to remote cylinders) USA made NOTE: Eliminates belt driven pump, pulleys & brackets. Enables you to use your hydraulic pump to operate the power steering. Is preset at 1500 PSI & 8 gpm. Adjust to your application.
Tie rods, partsOrder # Price Application / Dimensions
ACS213 (LH)
$72.50
Tie Rod End fits: B, CACS213: Replaces: 70207726(13/16" x 18 RH thread)
ACS211: Replaces: 70207725(13/16" x 14 RH thread)
ACS211 (RH)
$72.50
ACS066 $71.50 2-pc. Tie Rod fits: CA w/ adjustable wide front axle (Must use a 7 degree tapered reamer to fit steering arms); D14, D15, D17, D19, WD, WD45 (if cut to length), 170 up to SN: 170 - 7500, 175 up to SN: 175 - 2035, 180, 185, 190, 190XT, 200, Replaces: 70249418, 70254661, 70254662, Can Replace 70250141, 70250142 (Inside tie rod 16-3/8" long grease fitting to end, .782" dia. rod, Outer tube 17-3/8" long grease fitting to end, 1.560" O.D. tube, tie rod end tapers to .660" to .735")
53STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almersSeats, parts
Order # Price Description / Application
ACS116 $32.95Seat Back fits: B, C, Replaces: 70208664NOTE: Metal.
ACS175 $42.80 Spring Support fits: B, CReplaces: 70208874 USA madeNOTE: Spring steel, powder coat orange. 2 spring supports used per tractor; Sold individually.
ACS157 $6.75 Hardware Kit (For ACS116)NOTE: Includes (4) square nuts, (4) flat head screws, (4) lock washers. Like original.
ACS111 $76.50 Bottom Seat Cushion fits: B, CReplaces: 70205693 (28" long x 15" wide x 4" tall) USA madeNOTE: Black vinyl; Wood backed.
ACS071 $32.95Seat Back (Back Rest) fits: IB, RC, WC, WF, Rumley 6, Replaces: U2743(10-5/8" x 5-5/8" curved) USA made
ABC3211 $44.50 Shallow Seat Pan fits: IB, RC, WC, WF, Serviceable for U145, 200145(17-1/2" wide, 14" front to back, 3" tall, 1/2" single bolt hole) NOTE: Metal.
FDS067 $48.50 Seat Pan fits: CA, RC, WC, Some WD, WD45, WF (All w/ 1-bolt mount seat) Replaces: 70225050 (19" dia. pan, original seat pan was a 21" dia; 5/8" center bolt hole) NOTE: Steel, 9 hole, bolt down, non-flip back.
ABC372 $18.30 Seat Repair Kit w/ Rivets (For ABC3211, FDS067) (5-1/2" O.D.; 5/8" center bolt hole) USA made
ACS176 $14.95Seat Pivot Bolt Bushing fits: WD up to SN: 127006, Replaces: 70225041NOTE: 2 used per tractor; Sold individually.
ACS328 $24.95 Seat Pivot Bolt Bushing fits: CA w/ pan seat, WD SN: 127007 & up, WD45, WD45D, Replaces: 70225183(3.368" o/a length, .635" I.D.)NOTE: 1 used per tractor.
ACS1891 $14.95 Seat Bumper fits the following w/ a standard pan style seat: D10 SN: 2267 & up, D12 SN: 2242 & up, D14, D15, D17, D19, D21, (170 - 190XT w/out deluxe padded seat), Replaces: 70229703, 910880 (nut), 904204 (washer)(1.043" long, 1.015" dia.)
Seats, parts cont...Order # Price Description / Application
MIS2679 $34.75
Orange Tractor Seat Pad fits: 19" Pan (side to side) (Drawstring, 1-1/2" thick)USA made
MIS006AC $34.75
Orange & White Tractor Seat Pad fits: 19" Pan (side to side)(Drawstring, 1-1/2" thick) USA made
MIS3199 $39.95
Orange Seat Pad fits: 21" Pan (side to side) (Drawstring, 1-1/2" thick)USA made
MIS3204 $39.95
Orange & White Seat Pad fits: 21" Pan (side to side) (Drawstring, 1-1/2" thick)USA made
MIS006BK $39.95
Black Tractor Seat Pad fits: 21" Pan (side to side) (Drawstring, 1-1/2" thick)USA made
ACS221(Assy)
$364.50
Seat Cushions w/ Steel Frame fits: D10, D12, D14, D15, D17, D19, D21; Will also fit some 170, 175, 180, 185, 190, 190XT, 210, 220 (All using 2-piece seat w/out arm rests), Replaces: 70236318 USA made NOTE: Restoration quality. Metal backed. Cushions are embossed like original!
ACS222 Replaces: 70236318 USA made
ACS223 Replaces: 70236461 USA made
ACS222(Back rest)
$104.95
ACS223(Bottom)
$138.95
ABC445 $146.95
Universal Full Suspension Seat w/ Back Rest & 5-Angle Base (w/ Slide Track & Mounting Brackets) fits: Allis Chalmers models NOTE: Can be adapted to fit many utility tractors & lawn mowers.
IHS347 $43.75 Mid-Mounted Seat Shock Absorber w/ Bushings (7-1/4" c.c. compressed; 9-1/8" fully extended) NOTE: One horizontal bolt hole at each end.
ABC526 $9.65Seat Shock Bolt Also Serviceable for WD, WD45 (7/16"-20 NF, .625" shoulder, 2.380" o/a length) USA made
IHS030 $28.95
Seat Spring Coil
IHS584 $19.95 Seat Pivot Support Rod fits: B, C, CA, RC, U, WC, WF (3-1/2") NOTE: Includes (2) flat washers, (2) rubber bushings, (2) #5 bolts. Exact of original.
FendersSame gauge, weight & material as original equipment.
Fit to tractor before painting.
Order # Price Application
ACS093L(LH)
$102.50
Fits: Early B; Serviceable for Late B, C, CA ACS093L Replaces: 70225234ACS093R Replaces: 70225236NOTE: Not restoration quality, more rounded then original fenders. To fit Late B, C, CA customer will need to grind off brackets.
ACS093R(RH)
$102.50
ACS095L(LH)
$175.95
Fits: RC; Styled WC (1940 & up)ACS095L Replaces: 70208206ACS095R Replaces: 70208207NOTE: Includes mounting brackets. Not restoration quality.
ACS095R(RH)
$175.95
ACS097L(LH)
$151.50
Fits: WD, WD45ACS097L Replaces: 70224935ACS097R Replaces: 70224934NOTE: Not restoration quality.
ACS097R(RH)
$151.50
ACS126L(LH)
$225.00
Fits: D17, D19ACS126L Replaces: 70237344ACS126R Replaces: 70237342NOTE: Not restoration quality.
ACS2545 $62.50 Brake Pedal Shaft & Bushings fits: GReplaces: 70800000 (shaft) USA made
ACS1573 $28.35 NEW! Brake Pedal Shaft only fits: GReplaces: 800000, 70800000(11.783" long, .875" O.D.) USA madeNOTE: Bare metal.
ABC105 $42.50 Lined Brake Band (Hinged) fits: B, IB, C, CA, Replaces: 70216775NOTE: 1 band for 1 wheel only.
ACS1650 $8.95 Brake Pivot Pin fits: B, IB, C, CAReplaces: 70207221 (0.750" dia. x 1.625" long) USA made NOTE: Zinc plated. Fits hand & foot brakes.
ACS1652 $19.95 Brake Adjusting Screw fits: B, IB, C, CAReplaces: 70213375 (7/16"-20 NF x 3" long) USA made NOTE: Zinc plated. Fits foot brakes only.
ABC017 $9.95 Brake Shoe Lining Set w/ Rivets fits: B, IB, C, CA, Replaces: 70209864(Long shoe is 2" W x 7-3/8" L; Short shoe is 2" W x 6-3/8" L)NOTE: For 1 side.
56 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Brake parts cont...Order # Price Description / Application
ACS251 $18.50 Brake Shoe Lining Set w/ Rivets fits: D10, D12, D14, (D15 up to SN: 9001), G, Replaces: 70230874, 70800412(1-3/4" wide x 8-1/8" long x .190" thick)NOTE: For 1 side.
ACS252 $14.95 Brake Shoe Lining Set w/ Rivets fits: D17 up to SN: 42000, WD, WD45, WD45DReplaces: 70231633 (2" wide x 6-1/2" long) NOTE: For 1 side. New & improved using flexible material!
ABC3703 $34.95 NEW! Brake Band w/ Riveted Lining fits: D17 SN: 42001 & up, D19, D21, 170, 175, 180, 185, 190, 190XT, (200 up to SN: 4000)
ABC164 $18.50 Brake Shoe Lining Set w/ Rivets fits: D17 SN: 42001 & up, D19, D21, 170, 175, 180, 185, 190, 190XT, (200 up to SN: 4000) (1-1/4" wide x 7-1/4" long)NOTE: For 1 side.
MIS1131 $33.95 Brake Riveting Tool (1-1/4" deep throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Not for use w/ deep recess shoes. Use for ABC017, ACS251 shoes.
MIS2547 $89.95 Riveting Tool (For brake shoe & disc relining for most tractors) (3-3/8" deep throat x 2-1/8" high throat) USA madeNOTE: Includes (2) punches. Use for ABC164, ACS252, ACS332 shoes.
ACS300 $24.90 Brake Rod Return Spring fits: G Replaces: 70800013 (9-9/16" o/a length)USA made NOTE: 2 used per tractor; Sold individually.
ACS298 $14.95 Brake Shoe Return Spring fits: G Replaces: 70800403 (2-3/16" o/a length)USA made NOTE: 4 used per tractor; Sold individually.
ACS271 $12.50 Brake Shoe Return Spring fits: B, C, CAReplaces: 70207320 (3-1/2" o/a length)NOTE: 2 used per tractor; Sold individually.
ACS2103 $12.95 Brake Band Return Spring fits: RC, WC, WF, W Speed patrol, Replaces: U2649, 70202649 (0.747" body O.D., 0.110" wire dia., 3.155" o/a length) USA madeNOTE: 2 used per tractor; Sold individually.
Brake parts cont...Order # Price Description / Application
ACS268 $13.95 Brake Rod Return Spring fits: WD, WD45 Replaces: 70222670 (6-5/8" o/a length)USA made NOTE: 2 used per tractor; Sold individually.
ACS283 $5.95 Front Brake Shoe Return Spring fits: D17 up to SN: 42000, D19, WD, WD45 Replaces: 70232564 (3.135" o/a length, .595" O.D., .081" wire dia.) USA madeNOTE: 2 used per tractor; Sold individually.
ACS266 $9.95 Rear Brake Shoe Return Spring fits: D17 up to SN: 42000, WD, WD45Replaces: 70222501 (3-1/4" o/a length)USA made NOTE: 2 used per tractor; Sold individually.
ACS316 $14.50 Brake Shoe Return Spring fits: D10, D12, D14, D15, Replaces: 70228253 (2-3/8" o/a length) USA made NOTE: 4 used per tractor; Sold individually.
ACS321 $12.50 Brake Pedal Return Spring fits: D10, D12, D14, D15, Replaces: 70239262 (4.590" o/a length) USA made NOTE: 2 used per tractor; Sold individually.
ACS3731 $6.50 NEW! Brake Return Spring fits: D17 SN: 42001 & up, D19, D21, 170, 175, 180, 185, 190, 190XT, (200 up to SN: 4000)Replaces: 235609, 250435, 70250435(.088" wire dia., .525" to .666" O.D., 1.389" o/a length) USA made NOTE: 4 used per tractor; Sold individually. See website for all applications.
ACS3727 $4.85 NEW! Brake Band Return Spring fits: D19, 190, 190XT, (200 up to SN: 4001)Replaces: 235618, 250446, 70250446(0.063" wire dia., 0.369" to 0.497" O.D., 1.293" o/a length) USA madeNOTE: 4 used per tractor; Sold individually. See website for all applications.
ACS3736 $3.45 NEW! Brake Band Return Spring fits: D17 SN: 42001 & up, 170, 175, 180, 185Replaces: 237220, 250447, 70250447(.062" wire dia., .510" O.D., 2.663" o/a length) USA made NOTE: 4 used per tractor; Sold individually.
ACS1191 $19.95 Brake Anchor Shoe Pin fits: D17 up to SN: 42000, WD, WD45, Replaces: 70232801 (0.752" O.D., 6-5/8" o/a length) USA made NOTE: 2 used per tractor; Sold individually.
ACS3558 $68.45 Brake Pin Removal Tool fits: D17 up to SN: 42000, WD, WD45, WD45D USA made NOTE: Pin must have at least half of the head remaining for the puller to work.
57STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
Ch
assis parts
Rear axle, parts cont...Order # Price Description / Application
ACS1529 $18.95 Outer Upper Final Drive Shaft Seal fits: B, IB, C, CA, ED40, Replaces: 70206449(1.375" I.D., 2.720" O.D., .468" width)NOTE: 2 used per tractor; Sold individually.
ACS1525 $14.50 Final Drive Pan Gasket fits: B, C, CA, D10, D12, D14, D15, ED40, I60, I500, I600Replaces: 70233186 USA made NOTE: 2 used per tractor; Sold individually.
ACS2612 $14.50Final Drive Pan Gasket fits: WD, WD45, D17, 170, 175, 180, 185, Replaces: 247874, 70247874 USA made
ABC2837 $9.95Inner Upper Final Drive Shaft Seal fits: WD, WD45, D17, 170, 175, 180, 185Replaces: 70218450 (1.500" I.D., 2.380" O.D., 0.315" wide) NOTE: 2 used per tractor; Sold individually.
ABC1543 $13.95 Outer Differential Shaft Seal fits: D10, D12, D14, D15; Industrials: 500, 510, 512, 600, 610, 612, 614, 615, 621, I60, I600Replaces: 70244961 (1.375" I.D., 2.378" O.D., 0.312" wide) NOTE: 2 used per tractor; Sold individually.
Steps - USA madeOrder # Price Description / Application
ACS272 $74.50
Step Assembly fits: B, C(16-1/2" o/a length, 5" pad width)NOTE: Mounts to square bar by pedals.
ACS1977 $74.50
Step Assembly fits: CA(16-1/2" o/a length, 5" pad width)NOTE: Mounts to left side of torque tube.
ACS3407 $112.50
2-pc. Step Kit fits: WD, WD45, WD45DNOTE: No drilling required. Both steps mount to the left frame rail in front of the rear tire. Mounting hardware is not included.
Brake parts cont...Order # Price Description / Application
ABC3477 $5.95 Actuating Spring (For Disc Brakes) Fits: 200 SN: 4001 & up, 210, 220, 7000Replaces: 70252628, 70261838 (1.294" o/a length, 0.110" wire dia., 0.840" O.D.) USA made NOTE: 3 used per actuator, 6 used per tractor; Sold individually.
ABC1628 $14.95Inner Axle Seal fits: G, Replaces: 70800351(1.187" I.D., 2.004" O.D., 0.250" width)NOTE: 2 used per tractor;Sold individually.
ACS1531 $14.95Rear Axle Outer Oil Seal Fits: B, IB, C, CA Replaces: 70206450 (2.500" I.D., 3.548" O.D., .438" width) NOTE: 2 used per tractor; Sold individually.
ABC1628 $14.95 Inner Upper Final Drive Shaft Seal fits: B, IB, C, CA, (D14 up to SN: 19001); Also fits D10, D12, (D14 up to SN: 19001), D15, ED40, I60, I400, I500, I600 as a differential carrier seal, Replaces: 70230851, 70232186, 70261958, 70800351(1.187" I.D., 2.004" O.D., 0.250" width)NOTE: 2 used per tractor;Sold individually.
ACS2105 $49.95 Rear Axle Hub Rubber Oil Seal fits: RC, WC, WF, W Speed patrol Replaces: U2533, 70202533, 79016729(8.550" I.D., 9.975" O.D., 0.795" wide)NOTE: 2 used per tractor; Sold individually.
58 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Hydraulic partsOrder # Price Description / Application
ACS178 $38.50 Hydraulic Breather Cap & Copper Filter Element fits: D10 up to SN: 3501, D12 up to SN: 3001, D14, D15, D17, D19Replaces: 70203196, 70205298 (3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "OIL" stamped into top.
ACS3464 $12.50 5-pc. Hydraulic Lift Cylinder Packing Kit (For 1 cylinder) fits: Some Late B, C using 1 single 70222677 hydraulic lift cylinder w/ 1.250" O.D. ram (Measure ram dia. before ordering, 1 used per tractor); CA; D10 up to SN: 3501, D12 up to SN: 3001 both w/ traction booster; WD, WD45, WD45 diesel (2 used per tractor)Replaces: 70222677 (1.740" O.D., 1.210" I.D.) USA made NOTE: Sold individually.
ACS3761 $41.25 NEW! External Hydraulic Lift Arm Cylinder Seal & Breather Kit fits: D17 series IV SN: 75000 & up, D19 w/ 3-point, 170 up to SN: 5019, 180 up to SN: 5097, 190 up to SN: 25538, Replaces: 70255805, 70257772 USA made NOTE: 2 kits used per tractor; Sold individually.
MIS118 $62.35PTO Over-Running Clutch (1-1/8" Female) fits: Tractors up to 75 horsepower Replaces: Hub City C670F(1-1/8" - 6 x 1-3/8", 6 spline)
MIS138 $62.35PTO Over-Running Clutch (1-3/8" Female & Male) fits: Tractors up to 75 horsepower, Replaces: Hub City C660F(1-3/8" - 6 x 1-3/8", 6 spline)
IHS1545 $16.99 Belt Pulley Shaft Seal fits: B, IB, C, CAReplaces: 70225450 (1.375" I.D., 2.506" O.D., 0.372" wide) NOTE: Narrower than original.
ABC1628 $14.95 PTO Shaft Seal fits: Some B, IB, C (All w/ 1-1/8" PTO), Replaces: 70206538(1.187" I.D., 2.004" O.D., 0.250" width)NOTE: May be narrower than original.
ABC2039 $8.95 PTO Shaft Seal (For 1-3/8" PTO) fits: Some B, C, CA, D10 - D19, H3 - I600, 170 - 7000 (All w/ 1-3/8" single speed PTO assy), Replaces: 70241779(1.375" I.D, 2.130" O.D., 0.437" wide)
ABC1543 $13.95EACH PTO / Belt Pulley Shaft Seal fits: RC, WC,
59STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
Ch
assis parts
Front wheel sealsOrder # Price Description / Application
ACS1177 $17.95 Front Wheel Seal fits: B, C, CA, D10, D12 Replaces: 70207365 (1.437" I.D., 2.563" O.D., 0.586" wide) NOTE: Steel & felt. Improved design. This Steiner exclusive is the best fitting wheel seal in the aftermarket and is half the price of the OEM seal.
ACS2085 $12.95 Front Wheel Seal fits: G, Replaces: 70800445 (1.180" I.D., 2.047 O.D., 0.388" wide) NOTE: 2 used per tractor; Sold individually. This seal is .060" smaller in O.D. than the original. Customers using this seal use RTV or FORM-A-GASKET on the outside of the seal to compensate for the difference.
ABC270 $5.50 Front Hub Seal fits: D10 SN: 3501 - 9000, D12 SN: 3001 - 9000, D14, (D15 up to SN: 9000), D17 up to SN: 42000, RC, WC, WD, WD45, WF (All w/ felt front hub seals) Replaces: 70202104 (2.000" I.D., 3.156" O.D., 0.375" wide) USA made NOTE: Felt.
Front wheels / rimsTo determine the width of Wheels / Rims: Measure the inside
(bead to bead) not outside to outside. See page 368B
Order # Price Description / Application
WHS023 $64.95
3" x 12" Front Wheel w/ Blank Center fits: G, Replaces: 70800047 (10.160" I.D.)
ACS010 $71.95 Front Wheel (5 Lug) fits: B, C, CA, D10, D12, Replaces: 70231520 (3" x 15", 2-3/4" pilot, 2-5/8" bolt center to center) USA made NOTE: We recommend new lug bolts & retorque lug bolts periodically.
Front wheels / rims continue on next page
PTO parts cont...Order # Price Description / Application
ABC3401 $11.95PTO Gearbox Output Shaft Oil Seal fits: WD, WD45, WD45D, Replaces: 70224779 (1.375" I.D., 2.441" O.D., 0.250" wide) NOTE: 1 used per tractor.
Front wheel hardwareOrder # Price Description / Application
ABC399 $2.25 Front Wheel Lug Bolt fits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, RC, WC, WD, WD45, 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, I-40, I-400, I-60, I-600, Replaces: 70207503, 70256906 (1/2" - 20 NF, 1" thread length, 13/16" hex head) NOTE: 5 to 6 used per rim; Sold individually.
ABC254 $20.50Front Wheel Clamp Lock Nut (For Axle Shaft & Front Wheel) fits: B - 7000 (All w/ regular axle except D21, 210, 220)(3/4"-16 UNF thread) NOTE: No re-threading necessary on worn shafts. Check size before ordering.
ACS1789 $39.95Front Wheel Bearing Kit fits: B SN: B-101 & up, IB, C, CA, (D10 up to SN: 3501 & SN: 9001 & up), D12 up to SN: 3001 & SN: 9001 & up, Replaces: 70228459 NOTE: 2 used per tractor; Sold individually. Seals sold separately, order ACS1177.
ACS1793 $57.99 Front Wheel Bearing Kit w/ Seal fits the following w/ 5 bolt front hub: D10 SN: 3501 & up, D12 SN: 3001 & up, D10, D12 high clearance up to SN: 3501, D14 wide front only, D15 up to SN: 9001, D17 up to SN: 42001, RC, WC, WD, WD45Replaces: 70228458NOTE: 2 used per tractor; Sold individually.
ABC3437 $5.20
Inner Front Wheel Bearing fits: 5015, 5020, 5030, 5215, Replaces: 72098252(1.181" I.D., 2.440" O.D., 0.629" wide)NOTE: Bearing is not sealed.
What is back spacing?To determine back spacing lay your wheel flat on the
ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8").
60 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Front wheels / rims cont...To determine the width of Wheels / Rims: Measure the inside
(bead to bead) not outside to outside. See page 368B
Order # Price Description / Application
ACS009 $82.95 Front Wheel (5 Lug) fits: D10, D12 both equipped w/ 16" rim, D14, D15, Early D17, WC, WD, WD45, WF, Replaces: 70232832(4.25" x 16", 3-3/8" pilot, 3" bolt center to center) USA made NOTE: Not recommended for tractors w/ loaders. We recommend new lug bolts & retorque lug bolts periodically.
IHS193 $65.49 Front Wheel (Blank Center) fits: WFReplaces: 70206134 (4.25" x 16"; 13.430" I.D.) USA made NOTE: Use w/ 13.430" dia. center dish. No loops, electro-coated black. Not for tractors using 3 loop style rims. Check your rim type before ordering as rim may have been switched from the original.
WHS042 $71.49Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Allis Chalmers models(6" x 15", 6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made
Front wheels / rims cont...Order # Price Description / Application
WHS022 $74.50Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some Late D15, D17, D19, 160 - 190XT, 6060, 6070, Replaces: 70235086, 70248460 (4.5" x 16", 4.625" pilot hole, 6" bolt circle, 4" back spacing) USA madeNOTE: For 5:50 x 6:00 x 16" tires.
WHS043 $82.95Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some D17 SN: 75001 & up, D19, 160, 170, 175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080, 7000, I60, I600 & othersReplaces: 70235727, 70237405(6" x 16", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing) USA made
WHS070 $86.45
Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 160 - 7000 seriesReplaces: 70255499 (8" x 15", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing) USA made
Ch
assi
s p
arts
Order # Price Description / Size
WHS057 $55.00 Triple rib, Tire only fits: G (4.00 x 12")WHS3697 $56.50 NEW! Triple rib, Tire only fits: G (4.50 x 12")WHS051 $16.45 Tube only (For 4.00 x 12", 4.80 x 12" Tires) fits: GWHS052 $83.75 Triple rib, 6 ply Tire only (For 3" x 15" Wheel) (5.00 x 15")WHS053 $14.80 Tube only (For 4.00, 5.00, 5.50 x 15" Tires)WHS047 $94.95 Triple rib, 6 ply Tire only (5.50 x 16")WHS048 $101.95 Triple rib, 4 ply Tire only (6.00 x 16")WHS049 $109.95 Triple rib, 6 ply, Tire only (6.50 x 16")WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires)WHS060 $37.95 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires)WHS059 $53.75 Rear Tube only (For 11.2, 12.4 x 24" Tires)WHS058 $56.55 Rear Tube only (For 11.2, 12.4 x 28" Tires)WHS061 $82.50 Rear Tube only (For 13.6, 14.9 x 28" Tires)WHS062 $56.95 Rear Tube only (For 9.5 x 32" Tires)WHS063 $66.95 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires)WHS064 $65.25 Rear Tube only (For 11.2, 12.4 x 38" Tires)WHS2513 $89.95 Rear Tube only (For 12.00, 13.00, 13.6, 14.00, 14.9, 15.5 x 38"
Tires)
Tires, tubes, valvesTubes are for BIAS ply tires only, not for radial tires. Also not for recreational use.
Need a tire or tube that is not listed? Call our technical service department.Tires, tubes, valves, nut are sold individually.
Order # Price Description / Application
ABC531 $5.15 Rear Tire Inner Tube Valve (Air / Water Valve) (New Style) fits: Tractor tubes w/ Internal threadsNOTE: Sold individually.
ABC384 $10.70 Rear Tire Inner Tube Valve (Air / Water Valve) Old Style) fits: Tractor tubes w/ External threadsNOTE: Sold individually.
61STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
Ch
assis parts
Rear rim hardwareOrder # Price Description / Application
ABC399 $2.25 Rear Rim Lug Bolt fits: GReplaces: 70207503, 70256906(1/2" - 20 NF, 1" thread length, 13/16" hex head) NOTE: 5 used per rim; Sold individually.
ACS276 $24.85 Clamp (Plain Style) fits: B SN: 58401 & up, IB, C, Replaces: 70210215 (5/8" bolt hole)NOTE: 4 used per tractor; Sold individually.
ACS274 $24.85 Clamp (Eccentric Style) fits: B SN: 58401 & up, IB, C, Replaces: 70210216 (13/16" bolt hole) NOTE: 4 used per tractor; Sold individually.
ACS281 $14.45Eccentric Bolt fits: B SN: 58401 & up, IB, CReplaces: 70210218 NOTE: 4 used per tractor; Sold individually.
MIS061 $3.75 Rear Rim Bolt Assembly w/ Nut & Washer fits: RC, WC, Early WD w/ 28" Rear Rim (3-1/2" NC hex head bolt w/ washer) NOTE: 6 used per rim; Sold individually.
MIS063 $3.95 Rear Rim Bolt Assembly w/ Nut (For tractors w/ stamped steel center dishes) fits: 28" Rear Rims - WHS004, WHS016 applications (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: 6 used per rim; Sold individually.
MIS121 $0.55 Flat Washer (For MIS063) (5/8" I.D.) NOTE: 6 needed per wheel; Sold individually.
ABC397 $2.95 Rear Rim Lug Bolt fits: D10, D12, D14, D15, D17, WD, WD45, 170, 175, 180, 185, I-40, I-400, I-60, I-600 (All w/ stamped steel dish), Replaces: 70225191, 70251815(9/16" x 18 NF, 1-1/8" thread length, 7/8" hex head) USA made NOTE: Sold individually. Can also work for front on some applications.
Rear rims / wheels - USA madeTo determine the width of Rims / Wheels: Measure the inside
(bead to bead) not outside to outside. See page 368B
Order # Price Description / Application
WHS030(8" x 24")
$279.50
Rear Rim (4 Dimple, 2 Blocks) fits: B, IB, CWHS030 Replaces: 70211201WHS031 Replaces: 70212169NOTE: Like original.
WHS031(10" x 24")
$280.50
Rear rims / wheels - USA made cont...Order # Price Description / Application
WHS026 $279.50 Rear Rim (6 Dimple, 2 Blocks) fits: RC, (WC SN: 81757 & up), Early WD, (WF SN: 1904 & up)Replaces: 70209464 (10" x 28")NOTE: Like original.
WHS016(9" x 28")
$149.00
Rear Rim (6 Loops) fits: Some ED40, RC, WC, Early WDWHS004 Replaces: 721299WHS012 Replaces: 79024700, 79024701
WHS004(10" x 28")
$159.00
NEW!WHS012(11" x 28")
$175.50
WHS013 $179.95NEW! Rear Rim (6 Loops) fits: 160, 5040, etcReplaces: 79024702(12" x 28")NOTE: Back spacing on loops = 3-1/2" & 7-3/4".
WHS1613 $235.95Flat Base Rear Rim (Blank Center) (For stamped steel 9 bolt pattern rims) fits: Allis Chalmers models(10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet.
WHS024 $306.00Rear Rim (Double Bevel) fits: Some D21, 190, 190XT, 200, 7000, others, Replaces: 70235523(14" x 38") NOTE: Has 18 drive lugs.
Front wheel weight, partOrder # Price Description / Application
MHS037 $90.00Front Wheel Weight Serviceable for B, C, CA & All 3" x 15" (5 Hole) rims(12-3/4" c.c. bolt holes) NOTE: Sold indvidually. Close out.
MHS038 $3.50J-Hook (For MHS037 Weight) NOTE: (4) J-Hooks required per weight; Sold individually.
62 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s
Rear spinout rims, partsNOTE: Stop holes are angled.
Order # Price Description / Application
ACS027 $450.00 Rear Spinout Rim (4 Rails) fits: D14, D15, Replaces: 70228211, 70232580 (12" x 26") USA made
WHS007 $453.00 Rear Spinout Rim (4 Rails)fits: D14, D15, Replaces: 70228211, 70232580 (12" x 26") USA made
ACS028 $453.00 Rear Spinout Rim (4 Rails) fits: Some D14, D15, WD, WD45, etc., Replaces: 70220011 (11" x 28")USA made
ACS026 $465.00 Rear Spinout Rim (4 Rails)fits: Some WD, WD45, 160, othersReplaces: 70226270 (12" x 28")USA made
WHS008 $477.00Rear Spinout Rim (4 Rails) fits: D17, Some WD45, 170, 5040, 5045, 5050, 6140, othersReplaces: 70237573 (13" x 28")USA made NOTE: Stop holes are angled. Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108).
MIS109 $14.99Rear Spinout Rim Stop (For Parallel Drilled Rim Rail) fits: Allis Chalmers models, Replaces: 70219456
NOTE: Use MIS109 for the listed spinout rims.
MIS108 $18.75Rear Spinout Rim Stop (For 90 degree Drilled Rim Rail) fits: Allis Chalmers models, Replaces: 70232274, 70230832 USA made NOTE: Will not fit the rims that we sell.
MIS110 $8.95Stop Bolt (For Rear Spinout Rim Stops)Fits: Allis Chalmers modelsReplaces: 70218662, 70225190, 72073627(2-5/8" o/a length) USA madeNOTE: Sold individually.
Front weights, partsOrder # Price Description / Application
ACS180 $164.50Front Weight fits: D15, D17, D19, RC, WC, WD, WD45 gas, LP, WFReplaces: 70227272, Casting AM4162-3NOTE: Will not fit WD45 diesel.
ACS347 $25.9513-pc. Snap Coupler Repair Kit fits: D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XT NOTE: 2 kits used per tractor; Sold individually. See website for contents.
ACS269 $6.50 Snap Coupler Spring fits: D10, D12, D14, D15, D17, D19, WD, WD45, 190, 190XTReplaces: 70235881, 327360 (3-1/4" o/a length) USA made NOTE: 4 used per tractor; Sold individually.
ABC2010 $24.00 Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually.
ABC1433 $2.15 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing fits: Allis Chalmers models w/ a Category 2 3-point hitch switching to a Category 1 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)
ACS301 $59.95BACK IN STOCK! Drawbar Hanger fits: G up to SN: 26750; Serviceable for SN: 26751 & up, Replaces: 70800454USA made
ACS356 $150.00
Drawbar Guide Assembly fits: WD, WD45, Replaces: 70226522 USA made
ACS261 $299.95
Drawbar Yoke Assembly fits: D14, D15, D17 series I, II, (III w/ snap coupler hitch), Replaces: 70232074, 70232073, 70231146, 70224650 USA made NOTE: Can be used for heavy duty applications for D14, D15.
3-point conversions, parts - USA madeOrder # Price Description / Application
ACS015 $575.003-Point Hitch Conversion Kit (Category 1) fits: B, C NOTE: Complete w/ 2" x 8" hydraulic cylinder, shortened adjustable top link & bracket. Tractor must have hydraulics to use this conversion. Bolts onto drawbar.
ACS011 $430.00 3-Point Hitch Conversion Kit (Category 1) fits: D14, D15, WD, WD45 NOTE: Snap coupler drawbar must be removed to install. Top link & top link bracket not included.
ACS016 $54.50
Top Link Bracket fits: CA, WD, WD45NOTE: Bolts around rockshaft. 7/8" dia. hole for Category 1 top link.
ACS017 $72.00
Top Link Bracket fits: D14, D15 NOTE: 7/8" dia. hole for Category 1 top link.
ACS014 $575.00
3-Point Hitch Conversion Kit (Category 2) fits: WD, WD45, D14, D15 series I, D17 series I & IINOTE: Top link & top link bracket not included.
ACS013 $475.003-Point Hitch Conversion Kit (Category 2) fits: D17, D19, 190, 190XT NOTE: Snap coupler drawbar must be removed to install. Top link & top link bracket not included.
ACS018 $92.95
Top Link Bracket fits: D17 except series IV NOTE: 7/8" dia. hole for category 1 top link.
ACS020 $105.00
Top Link Bracket fits: D17 series IV, 190, 190XT NOTE: Welded steel, not cast. 7/8" dia. holes for Category 1 top link. Close out.
64 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
All
isC
hal
mer
s Mylar decalsAllis Chalmers did not use symbol decals before 1951. The model symbol decal drawings were made in June 1951 and included the B, CA, WD. The decals had a
clear background with black letters. Blue letters were used through 1948 and black letters were used from 1949 and up. All decals are USA made.
Tips on applying our decalsAll decals are mylar unless otherwise noted. Have the pitted area filled, sanded smooth and painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed.
For mylar decals (film between lettering): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface.
For vinyl cut deals (no film between lettering) Special order only: Peel backing paper from decal. The decal will be stuck to the application paper. Align the decal using the design, not the application paper, and firmly press decal into place. Slowly remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. CAUTION: Inspect all decal pieces before applying to tractor.
DEC288 DEC215 DEC055DEC465
Mis
cell
aneo
us
Order # Price Application
DEC465 $7.50 Allis Chalmers square (4-1/2" x 4-1/2")DEC051 $39.99 B (up to & including 1939) (Blue w/ Long A & S)DEC288 $24.99 B (1939-44) (Black w/ Long A & S)DEC255 $24.99 B (1944 & up) (Black w/ even letters)DEC052 $24.99 C (1944 & up), Replaces: 213322 (Black w/ even letters)DEC053 $24.99 CA, Replaces: 225338 (Black)DEC301 $48.99 D10 series I up to SN: 1950 (1959-60), Replaces: 234495DEC302 $48.99 D12 series I up to SN: 1950 (1959-60 w/ black bar grille), Replaces: 234495DEC354 $56.99 D14 up to SN: 18230 gas (1957-59), Replaces: 232596
(Silver w/ black border; Oval model letter)DEC214 $48.99 D14 series I SN: 19001 & up (1959 & up), Replaces: 233542
(Black letter w/ black border)DEC303 $48.99 D15 series I up to SN: 13000 (1960-62), Replaces: 233542DEC356 $56.99 D17 gas up to SN: 24000 (1957-59), Replaces: 230280 (Oval model letter)DEC357 $59.99 D17 diesel up to SN: 24000, Replaces: 230279 (Oval model letter)DEC215 $48.99 D17 SN: 24001 - 31625 gas only (1959-60 w/ black bar grille)
Replaces: 232600DEC056 $24.99 GDEC433 $45.99 G (Vinyl cut)DEC049 $40.99 RC (Blue) NOTE: RC letters are NOT included. Available by special
order only.DEC047 $40.99 WC (1934-38) (Blue w/ Border) NOTE: Serviceable for 1933 but blue
letters instead of black, has long 'A' & 'S' letters.DEC048 $40.99 WC (1939-40) (Blue w/ Long A & S)DEC289 $41.00 WC (1941-48) (Black)DEC054 $24.99 WD (Black)DEC438 $79.99 WD (Black), Replaces: 226503 (Vinyl cut)DEC055 $44.99 WD45 (Black)DEC439 $79.99 WD45 (Black) (Vinyl cut)DEC383 $54.99 WD45 diesel (Black)DEC050 $40.99 WF (1937-40) (Blue w/ long A & S & w/ Border)DEC254 $40.99 WF (After 1940) (Black w/ long A & S)
NO REFUNDS on mylar decals if applied to surface and / or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water.
65STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Allis
Ch
almers
Manuals, videosBuild your "how-to" library with us. Reprint manuals are a must for your classic
Allis Chalmers. View tutorials and most requested repair videos at SteinerTractor.TV
Data bookAllis Chalmers Farm Tractors & Crawlers Data Book by Terry Dean
BOK074 • $19.95Put everything you need to know about Allis Chalmers tractors in your hip pocket! Beginning with the model 10-18, this book covers all major Allis Chalmers tractor and Crawler models produced up through 1963. Packed with specs, serial numbers, engine codes, dates of manufacture, decal placement, options and original prices. Ideal for auctions! (Sftbd., 4-1/2" x 7-1/2", 192 pgs., 60 b&w ill.)
I & T Shop Service™ manuals - Printed in USAAn I & T Shop Service™ manual tells you how to take a tractor apart,
how to fix it and how to put it back together again. These are authentic
manuals that deal with repairs in the language of a mechanic with an
easy to use format. They include valuable information as to specifications,
torques, etc. illustrated by exploded views and photos. If you are in
serious repairs or restoration, you need an I & T Shop Service™ manual.
It will offer many short cuts and save you time!
Order # Price Application
AC11 $31.95 B, C, CA, G, RC, WC, WD, WD45 diesel, WFAC201 $34.95 Allis Chalmers Collection: D10, D10 series III, D12, D12 series III, D14,
D15, D15 series II, D17, D17 series III & IV, 160, 170, 175NOTE: Includes electrical wiring diagrams.
AC202 $34.95 Allis Chalmers Collection: D19, D19 diesel, D21, D21 series II, Two-Ten, Two-Twenty, 180, 185, 190, 190 XT, 200, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080 NOTE: Includes electrical wiring diagrams for D19, D21, 180, 185, 190, 190XT, 200, 210, 220, 7000. Does not include electrical diagrams for 7010 - 7080.
Operator manual reprints - Printed in USAAn operator’s manual (reprints only) sometimes referred to as the owner’s
manual is the manual that came with the tractor. It is the manual that was
given to the ultimate consumer by the manufacturer. It can be compared
to the manual you receive in the glove box of a new car. This manual gives
the owner-operator instructions, shift patterns, capacities (anti-freeze,
crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a
very useful and valuable tool in operating your tractor.
Service manual reprints - Printed in USAA service manual reprint with wiring diagrams tells you how to take the
tractor apart, how to fix it and how to put it back together again. It is a
reprint of the manual that the factory furnished the dealer’s shop service
department, and was not sent or given to individual retail customers.
It deals with repairs in the language of a mechanic. Often times it includes
valuable information as to specifications, torques, etc. A service manual
reprint will offer many short cuts and save you time!
Order # Price Application
REP031 $14.95 B (Operator's Manual)REP032 $15.50 C (Operator's Manual)REP036 $19.95 B, C (Service Manual) NOTE: Includes electrical wiring diagram.REP3499 $20.00 Moldboard Plow (Setting Up & Repair Manual) For B w/ #5 1-bottom
plow & #52 2-way plow, manual lift plows, Replaces: TPL-119AREP033 $15.95 CA (Operator's Manual) NOTE: Includes electrical wiring diagram.REP037 $18.99 CA (Service Manual) NOTE: Includes electrical wiring diagram.REP094 $23.95 D14 (Service Manual) NOTE: Includes electrical wiring diagram.REP034 $15.95 G (Operator's Manual) NOTE: Includes electrical wiring diagram.REP039 $19.95 G (Service Manual) NOTE: Includes electrical wiring diagram.
Operator / service manual reprints continue on next page
Deluxe tractor umbrellasFour oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform.
ABC2362 • $192.95 White Deluxe Umbrella w/ Brackets
Show your Allis Chalmers pridewith our tractor yard spinner!
MIS130 • $78.65WD, WD45 styleAwesome in size & realism, these yard /garden spinners share the exact detailing as the real thing! Made with fade resistant SolarMax® & SunTex
TM fabric each spinner withstands daily UV rays, rain & snow. Includes a heavy duty fiberglass pole & ground stake. Licensed. 48" x 28", 18-1/2" diameter