acting for and on behalf of The President of India invites E … · Description :Supply of 2 Nos. of RBC and 1 Nos. of OCC Eqpt , RBC Interface rack and modules for stations in the

Director & CEO/REL acting for and on behalf of The President of India invites E-Tenders against Tender NoREL_2018-19_MSS_1 Closing Date/Time 30/09/2019 15:00 Hrs. Bidders will be able to submit theiroriginal/revised bids upto closing date and time only. Manual offers are not allowed against this tender, and anysuch manual offer received shall be ignored.

1. NIT HEADER

Bidding type Two Stage Reverse Auction Template Normal

Contract typeMixed(Goods/Service/AMC)

Contract Category Expenditure

Tender No REL_2018-19_MSS_1 Tender Type Open - Indigenous

Evaluation Criteria Groupwise Bidding System Two Packet

Pre-Bid ConferenceRequired

YesPre-Bid Conference DateTime

16/04/2019 11:00

Tendering Section SIGNALLING

Inspection Agency Publishing Date / Time 16/03/2019 22:42

Procure From ApprovedSources

Yes Approving Agency

Closing Date Time 30/09/2019 15:00

Validity of Offer ( Days) 180 Ranking Order for Bids Lowest to Highest

Tender Doc. Cost (INR) 29500.00 Earnest Money (INR) 10000000.00

Initial Financial OfferRequired

YesAuto Elimination rulesapplicable

Yes

Initial Cooling Off Period(HH:MM)

02:00Subsequent Cooling OffPeriod (HH:MM)

00:30

Succesive Lots ClosingInterval (Min.)

30 Minimum Decrement (%) 0.20

Vendor Categories Bulk/Developmental Item Category General

Allow Next Bid LowerThan

Current Lowest Bid (Subject to Min. Decrement)

Tender Title PROVISION OF MODERN TRAIN CONTROL SYSTEM IN 4 SECTIONS OF IR

2. ITEM DETAILS

S.No. PL Code(Group)

Item TypeGST(Y/N)

Stock /NonStock

Ordering ConsiderFor Eval

ApprovingAgency

InspectionAgency

CurrencyAllowed

EstimatedRate

Group CP1-Contract Package - 1 for Work of Provision of Modern Train Control System Incl. LTE atRenigunta(RU)-Yerraguntla(YA) section of SCR (165 RKM)

1 1a (CP1) Service(Y)

Non Stock --- Yes CONSIGNEE INR

Description :Site survey to determine location of fixed balise, DPs of MSDAC and positioning of MSDACevaluators etc required for complete installation of ETCS Trackside including Signalling Systems and making roll-plan on Up and Dn line. (Kilo meter indicated below means RKM).

At (Location)RENIGUNTA -YERRAGUNTLA SECTION

Andhra Pradesh 165.00 Kilometre

2 1b (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Supply of Balise of ETCS L2 as per approved design requirement.

Page 1 of 30 Run Date/Time: 19/09/2019 17:35:38

CORPORATE OFFICE-DNM/RAILTEL CORPORATE OFFICETENDER DOCUMENT

Tender No: REL_2018-19_MSS_1 Closing Date/Time: 30/09/2019 15:00

Consignee REL Andhra Pradesh 1.00 Lot

3 1c (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Design and Supply of Interface Between RBC and EI/PI with SIL-4 Standard.

Consignee REL Andhra Pradesh 21.00 Station

4 1d (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Design and Supply of Interface Between RBC and RRI/Major PI with SIL-4 Standard


5 1e (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Design & supply of Power Plant and interconnecting cables, terminals, MCB, fuses, Cable tray forRBC Interface for each station. Details of Power Plant as per Annexure 3.


6 1f (CP1) Service(Y)


Description :1) Installation & Commissioning of balise as per approved plan including mount, frame, fixtures etc.2) RBC Interface including associated Power Plant, racks, cabling etc. at each station, and end to end testing withRBC


Andhra Pradesh 1.00 Lumpsum

7 1g (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Supply of essential tools & plant for ETCS Trackside as per approved list

Consignee REL Andhra Pradesh 1.00 Lumpsum

8 1h (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Spares (10%) for item no. 5(1e).


9 2a (CP1) Goods (Y) Non Stock --- Yes RDSO RDSO-QA INR

Description :Supply of MSDAC Equipment including DPs as per RDSO Spec RDSO/SPN/176/2013 Ver.3 andlatest amendment with 100% redundancy for all equipment of MSDAC separately for each track section, includingits associated all indoor equipment, indication panel and wiring the same to integrate with RBC as per theinstructions of Engineer at site. (Number in measurement unit means number of block section which includes Upand Dn both as one unit).

Consignee REL Andhra Pradesh 22.00 Numbers

10 2b (CP1) Goods (Y) Non Stock --- Yes RDSO RDSO-QA INR

Description :Supply of 6 Quad Cable as per RDSO Spec. IRS:TC 30/2005 and OFC cable as per RDSO spec.IRS:TC:55/2006/Rev 1.0 with latest amendments. This item also includes supply of related electronics, powersupply equipment required for interfacing various equipment being provided under the work.

Consignee REL Andhra Pradesh 220.00 Kilometre


Description :Interface between train detection system (MSDAC) with RBC.


12 2d (CP1) Service(Y)





Description :1)Installation and Commissioning of MSDAC including DPs including Interface with RBC 2)Diggingof 1.0mtr deep and0.3mtr wide trenches in all type of soils, including soft rock as per approved cable route planand back filling the trench after laying of cables. It includes clearing of roots of trees and bushes and temporaryobstructions on the selected cable route, ramming of soil and planting of cable marker (RFID) at every 50 mtrsand at every locations where direction of trench changes and special protection arrangements with GI/RCC pipeat track/LC crossing. The item includes covering of laid cables by sieved soil upto 5 cm before covering bybricks. Where digging of 1.0 mtr depth is not possible or depth is reduced/increased as per instructions given byengineer incharge then payment will be decreased/increased proportionately to the depth of trench. This itemincludes supply of galvanized cable markers. Note: Cable trenching between Station Limit (i.e. from Distant toDistant Signals) should be done at distance of 3.0 mtrs(minimum) from centre line of track and Outside StationLimit, cable trenching will be done at distance of 5.5 mtrs(minimum) from centre line of track. If above mentionedminimum distances are not available at site then trenching will be done by contractor as per instructions issuedby site engineer 3)Drawing/Laying of 6 Quad cable including jointing in the trench/pipes 4)Supply and laying ofpre- lubricated HDPE duct, 40mm OD, 33 ID as per specification number RDSO/SPN/TC/45/2012 revision 2.0.The item also includes supply and provision of all these accessories of HDPE duct like end caps, collars,bends,couplers etc. 5)Blowing /drawing of OFC cables in the HDPE duct along with all the protective work.6)Provision of earthing arrangement for OFC equipments. 7. This item also includes work of installation, testingand commissioning of OFC and related electronic equipments for the work. All the materials required for earthingwill be supplied by the Contractor. The value of earth will not be more than 1 ohm.If 1 ohm earth resistance is notachieved then number of pits may be increased or /and chemical treatment may be done without any additionalcost.


Andhra Pradesh 1.00 Job


Description :Supply of essential tools and plant as per approved list


14 2f (CP1) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :Spare (10%) for MSDAC with DP's, Quad Cable, OFC.


15 3a (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Supply of 2 Nos. of RBC and 1 Nos. of OCC Eqpt , RBC Interface rack and modules for stations inthe section , Power plant, cabling ,accessories, SPDs, Lightening Arrestor of class A, Networking Hardware ofOCC , client views and software.

Consignee REL Andhra Pradesh 1.00 Job

16 3b (CP1) Service(Y)


Description :Installation and Commissioning of RBC and OCC System




Description :Supply of essential tools and plant for RBC and OCC as per approved list.




Description :RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3)Monopole, Roof top pole Installation Services Qty as per annexure 1. (Kilo meter indicated below means RKM).







Description :Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X 200 AH @ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna for Tunnel. Anyother items to cover Tunnels, Bridges, Underways etc. Qty as per Annexure 1



Description :Supply of EMS- Hardware, Local EMS clients, EMS- Software for LTE -RAN. Qty as per Annexure1




Description :NMS Design, Planning, installation and commissioning services for item no. 4c.

At (Location)YERRAGUNTLA JN -RENIGUNTA JN ROUTE


22 4e (CP1) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :CAB LTE MODEM, Ruggedized MCPTT Handset and client software, CAB LTE ANTENNA,MCPTT Client HW for On-board PC and Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1.


23 4f (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Spares (10%) for item no. 4c



Description :Design, Manufacture and Supply of Electronic Interlocking (EI) system (with Centralized/distributedas per site arrangement) for way side stations as per Signal Interlocking Plan in "Hot Standby Architecture". EIsystem shall be provided to operate Dual VDU Control Terminal as per RDSO Specification No.RDSO/SPN/192/2005 with latest amendment and from RDSO approved source only. This includes supply of allthe material which is required to make complete EI system to be functional and as recommended by RDSO inRDSO specification; including all type of indoor and outdoor cable as per RDSO Specs for patching betweenexisting CTR & relay racks of EI/PI to new CTR & interface relay rack, Indoor relays, QBCA1/Point ContractorUnit of new EI as per site condition; This includes accessories and protection arrangements for laying andtermination; This also includes protocol convertors, embedded fanless based VDU control terminals with andMaintenance terminal as per RDSO Specification no. RDSO/SPN/192/2005 with latest ammendement andRDSO TAN no. STS/E/TAN/3007 verson 1 dated 02.11.12. The display size of VDU shall be 42 inch; This alsoincludes SMPS based integrated power supply (IPS) system suitable for 4/6 lines station. Details of EI as perAnnexure 2.



Non Stock --- Yes RDSO CONSIGNEE INR




Description :Installation, wiring, testing and commissioning of EI System with "Hot Standby Architecture assupplied at stations of the section. It includes transportation of material from store depot to the site, erection andgrouting of EI Relay Racks, fixing and wiring of all the interfacing relays(vital and non-vital), laying and terminationof all types of indoor and outdoor cables for patching between existing CTR and relay racks of EI/PI to new CTRand interface relay rack of new EI as per site condition with necessary cable protection; installation and wiring ofMicroprocessors equipment, interfaced equipment, power supply equipment and all other associated accessoriesto make complete EI system to be functional. Note: (i) Technical requirements are in Specifications (ii) Contractorhas to arrange simulator/Simulation testing panel for testing and commissioning by selection table and squiresheet for each Signalling function. (iii) Installation , wiring, testing and commissioning of EI system will be done byOEM after following all the guidelines/directives issued by RDSO from time to time; This also includes Installation,wiring, testing and commissioning of IPS system suitable for 4/6 line station station in RE/non RE area,confirming to RDSO Spec No. RDSO/SPN/165(Amdr-6) or latest along with remote indication panel; This alsoincludes installation of VDU control, Maintenance terminal and Provision of Ring Earth for EI system whichincludes supply of all components of earthing and bonding system like earth electrode, earth enhancementmaterial, earth pit, equi- potential earth bus bar, connecting cables and tape/strips and other associatedaccessories in accordance with RDSO Spec.No.RDSO/SPN /197/2008. Details of EI as per Annexure 2. FATand SAT of EI by REL/Railway will be arranged by contractor at OEM premise and at site respectively.

At (Location) REL Andhra Pradesh 8.00 Station

26 5c (CP1) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :Supply of essential tool kit for EI as per approved list. Details of EI as per Annexure 2.

Consignee REL Andhra Pradesh 8.00 Set

27 5d (CP1) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :Spares for Equipment cost. Details of EI as per Annexure 2.




Description :On-Board Survey & Design to identify location & fixing arrangement of ETCS Train borneequipment for LOCOS


Andhra Pradesh 150.00 Numbers


Description :Supply of On-Board Computer (OBC)



Description :Supply of Driver MMI



Description :Supply of BTM plus Antenna



Description :Supply of Wheel Sensors



Description :Supply of On-Board power supply unit



Description :Supply of Relays and Valves






Description :Supply of Brake Interface Unit


36 6i (CP1) Service(Y)


Description :Installation and testing of on-board eqpt as per ETCS norms and KPI

At (Location) DESIGNATED LOCOSHEDS Andhra Pradesh 1.00 Lot

37 6j (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Supply of essential tools and plant for ETCS On-board as per approved list


38 6k (CP1) Goods (Y) Non Stock --- Yes CONSIGNEE INR

Description :Spares (10%) for ETCS On-board equipment.




Description :Safety Case by RDSO Approved ISA to SIL-4 Standard for ETCS Track side Safety Validation toSIL-4 by ISA





Description :Safety Case by RDSO Approved ISA to SIL-4 Standard for ETCS On-board Safety Validation toSIL-4 by ISA



41 7c (CP1) Service(Y)


Description :Safety Case by RDSO Approved ISA to SIL-4 Standard for Integrated system Safety Validation toSIL-4 by ISA




Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for testing and first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 Trackside



Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for testing & first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 On-board




Description :Training of Railway/REL Personnel at OEM premises (Abroad)


Andhra Pradesh 180.00 Man-Week



Description :Training of Railway/REL Personnel at Locosheds/SDC/Other training facilities of bidder (India)








Description :Civil Works at Stations as per norms of S&T Eqpt rooms for EI as per detailed specifications givenin Section 5:Work Requirement, Volume-4, Part-II of the Bid Document per station 1200 sqft approx. as perapproved plan. This also includes structural design of EI/RRI building. This also includes required furnishing ofFurniture of branded make for Station (For each station, the requirement is; revolving chair 2 Nos., side arm chair4 nos;two Side tables and one front table for VDU, Block instrument, telephones etc; Almirah 2 Nos.). One tablewith sumica top size 4x6 sq. feet, cupboard with size 5x4x3 feet, one light weight aluminium folding ladder height2.5 meter. NOTE: Additional room at stations (existing EIs) for providing new EI in lieu of Interface shall beconstructed at the cost of bidder.


Andhra Pradesh 23.00 Station



Description :Construction of fully furnished RBC & OCC Building in compliance to NOC/ICT/DC Infra Standardwith branded furniture, fire retardant coated walls/panels , anti-static floor, general electrical works with FRSLcables as per detailed specifications given in Section 5: Work Requirement, Volume-4, Part-II of the BidDocument(per building 4000 sqft approx.)This also includes structural design of RBC & OCC building.





Description :Civil Works in the mid-section locations in between stations to house Electronic Eqpt like AxleCounters, Power plant etc. (per section 800 sft Approx.)as per approved building plan. This also includesstructural design of building.(Number of Block Section includes Up and Dn both as one unit).





Description :Provision of Fire Alarm and suppression System as per details given in Section 5: WorkRequirement, Volume-4, Part-II of the Bid Document and RDSO Spec. RDSo/SPN/217/2018 Ver.2 with latestamendment for rooms in RBC and OCC Buildings.

At (Location) REL Andhra Pradesh 16.00 Numbers

50 11a (CP1) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :Supply of ETCS Simulators for ETCS L-2 On-board equipment as per works requirement.



Description :Supply of ETCS Simulators for ETCS L-2 Trackside equipment as per works requirement.




Description :Installation and Commissioning of ETCS Simulators for ETCS L-2 On-board equipment as perworks requirement.





Description :Installation and Commissioning of ETCS Simulators for ETCS L-2 Trackside equipment as perworks requirement.







Description :Additional Items to be supplied to meet the Works Requirements and Scope of Work. Any changein SOR quantity may also be quoted as an additional item and detail breakup may be submitted.




Description :Additional Services required to meet the Works Requirement and Scope of Work. Any change inSOR quantity may also be quoted as an additional item and detail breakup may be submitted.

At (Location) REL Andhra Pradesh 1.00 Job

56 12c (CP1) AMC (Y) Non Stock --- Yes CONSIGNEE INR

Description :AMC cost for all equipment.Warranty Period: 1 years, AMC Period: 5 years, Rate of Discounting: 1 %


Andhra Pradesh 1.00 Year

57 4g (CP1) Service(Y)


Description :RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3) Monopole,Roof top pole Installation Services Qty as per annexure 1 Alt. (Kilo meter indicated below means RKM)for 900MHz.

At (Location)RENIGUNTA-YERRAGUNTLASECTION


58 4h (CP1) Goods () Non Stock --- Yes My ZonalApprovedSources

CONSIGNEE INR

Description :Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X AH@ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna for Tunnel. Anyother items to cover Tunnels, Bridges, Underways etc. Qty as per Annexure 1 Alt for 900 MHz.


59 4i (CP1) Goods () Non Stock --- Yes CONSIGNEE INR

Description :Supply of EMS- Hardware, Local EMS clients, EMS- Software for LTE -RAN. Qty as per Annexure1 Alt for 900 MHz


60 4j (CP1) Service(Y)


Description :NMS Design, Planning, installation and commissioning services for item no. 4i for 900 MHz

At (Location)REIGUNTA-YERRAGUNTLASECTION

Andhra Pradesh 1.00 Lot

61 4k (CP1) Goods (Y) Non Stock --- Yes My ZonalApprovedSources

CONSIGNEE INR

Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA, MCPTTClient HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1 Alt. for 900 MHz.





62 4l (CP1) Goods (Y) Non Stock --- Yes My ZonalApprovedSources

CONSIGNEE INR

Description :Spares (10%) for item no. 4i


63 4m (CP1) Service(Y)


Description :Services required to move 900 MHz to Radios to 700 MHz

At (Location) RENIGUNTA-YERRAGUNTLA Andhra Pradesh 1.00 Job

Group CP2-Contract Package - 2 for Work of Provision of Modern Train Control System Incl. LTE atVizianagaram(VZM)-Palasa(PSA) section on ECoR (145 RKM).



Description :Site survey to determine location of fixed balise, DPs of MSDAC and positioning of MSDACevaluators etc required for complete installation of ETCS Trackside including Signalling Systems and making roll-plan on up & Dn line.( Kilo meter indicated below means RKM)

At (Location)VIZIANAGARAM - PALASASECTION



Description :Supply of Balise of ETCS L2 as per approved design requirement

ConsigneeVIZIANAGARAM - PALASASECTION



Description :Design & Supply of Interface Between RBC & EI/PI with SIL-4 Standard



Description :Design & Supply of Interface Between RBC & RRI/Major PI with SIL-4 Standard



Description :Design & supply of Power Plant and interconnecting cables, terminals, MCB, fuses, cable tray forRBC Interface for each station. Details of Power Plant as per Annexure 3.






Andhra Pradesh 1.00 Lumpsum





Description :Spares (10%) for item no. 5 (1e).






Description :Supply of MSDAC Equipment including DPs as per RDSO Spec RDSO/SPN/176/2013 Ver.3 andlatest amendment with 100% redundancy for all equipment of MSDAC separately for each track section, includingits associated all indoor equipment, indication panel and wiring the same to integrate with RBC as per theinstructions of Engineer at site. (Number in measurement unit means number of block section which includes Upand Dn both as one unit).



Description :Supply of 6 Quad Cable as per RDSO Spec. IRS:TC 30/2005 and OFC cable as per RDSO spec.IRS:TC:55/2006/Rev 1.0 with latest amendments.This item also includes supply of related electronics, powersupply equipment required for interfacing various equipment being provided under the work.

Consignee REL Andhra Pradesh 130.00 Kilometre


Description :Interface between train detection system (MSDAC) with RBC.




Description :1)Installation and Commissioning of MSDAC including Interface with RBC 2)Digging of 1.0mtr deepand0.3mtr wide trenches in all type of soils, including soft rock as per approved cable route plan and back fillingthe trench afterlaying of cables. It includes clearing of roots of trees and bushes and temporary obstructions onthe selected cable route, ramming of soil and planting of cable marker (RFID) at every 50 mtrs and at everylocations where direction of trench changes and special protection arrangements with GI/RCC pipe at track/LCcrossing. The item includes covering of laid cables by sieved soil upto 5 cm before covering by bricks. Wheredigging of 1.0 mtr depth is not possible or depth is reduced/increased as per instructions given by engineerincharge then payment will be decreased/increased proportionately to the depth of trench. This item includessupply of galvanized cable markers. Note: Cable trenching between Station Limit (i.e. from Distant to DistantSignals) should be done at distance of 3.0 mtrs(minimum) from centre line of track and Outside Station Limit,cable trenching will be done at distance of 5.5 mtrs(minimum) from centre line of track. If above mentionedminimum distances are not available at site then trenching will be done by contractor as per instructions issuedby site engineer 3)Drawing/Laying of 6Quad cable including jointing in the trench/pipes. 4). Supply & laying of Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per SPECIFICATION NO. RDSO/SPN/TC/45/2012 Rev. 2.0.Theitem also includes supply and provision of all the accessories of HDPE duct like end caps, collars, bends,couplers etc. 5). Blowing/drawing of OFC cables in the HDPE duct along with all the protective work. 6). Provisionof earthing arrangement for OFC equipments. 7. This item also includes work of installation, testing andcommissioning of OFC and related electronic equipments for the work. All the materials required for earthing willbe supplied by the contractor. The value of earth will not be more than 1 ohm. If 1 ohm earth resistance is notachieved than number of pits may be increased or/and chemical treatment may be done without any additionalcost.




Description :Supply of essential tools & plant as per approved list



Description :Spare (10%) for MSDAC with DP's and Quad Cable, OFC.



Description :Supply of 2 Nos. of RBC & 1 Nos. of OCC Eqpt , RBC Interface rack & modules for stations in thesection , Power plant, cabling ,accessories, SPDs, Lightening Arrestor of class A, Networking Hardware of OCC ,client views and software.







Description :Installation & Commissioning of RBC and OCC System




Description :Supply of essential tools & plant for RBC and OCC as per approved list.




Description :RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3) Monopole,Roof top pole Installation Services Qty as per Annexure 1. ( Kilo meter indicated below means RKM)




Description :Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X200 AH @ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna for Tunnel. Anyother items to cover Tunnels, Bridges, Underways etc. Qty as per Annexure 1.



Description :Supply of Central Node ( 1+1)- Hardware ( SGW-PGW HW, vSGW-PGW HW, vMME HW, vPCRFH/W, vUDR HW, vHSS HW, vProvisioning Gateway HW, MCPTT server - HW, EMS- Hardware); Software(SGW-PGW SW, vSGW-PGW, SW, vMME SW, vPCRF S/W, vUDR SW, vHSS SW, vProvisioning GatewaySW, MCPTT server - SW, Local EMS clients, EMS- Software for LTE -RAN, EMS- Software for EPC Core,EMS- Software for MCPTT), Dispatcher System (Dispatcher Server, Terminal Clients) Qty as per Annexure 1




Description :Core, MCPTT & NMS Design, Planning, installation and commissioning services for item no. 4cabove.




Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA, MCPTTClient HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1



Description : Spares (10%) on item no. 4c.






Description :Design, Manufacture & Supply of Electronic Interlocking (EI) system (with Centralized/distributedas per site arrangement) for way side stations as per Signal Interlocking Plan in "Hot Standby Architecture". EIsystem shall be provided to operate Dual VDU Control Terminal as per RDSO Specification No.RDSO/SPN/192/2005 with latest amendment and from RDSO approved source only. This includes supply of allthe material which is required to make complete EI system to be functional and as recommended by RDSO inRDSO specification;including all type of indoor and outdoor cable as per RDSO Specs for patching betweenexisting CTR & relay racks of EI/PI to new CTR & interface relay rack, Indoor relays, QBCA1/Point ContractorUnit of new EI as per site condition; This includes accessories & protection arrangements for laying andtermination; This also includes protocol convertors, embedded fanless based VDU control terminals with andMaintenance terminal as per RDSO Specification no. RDSO/SPN/192/2005 with latest ammendement & RDSOTAN no. STS/E/TAN/3007 verson 1 dated 02.11.12. The display size of VDU shall be 42 inch; This also includesSMPS based integrated power supply (IPS) system suitable for 4/6 lines station. Details of EI as per Annexure 2




Description :Installation, wiring, testing and commissioning of EI System with "Hot Standby Architecture assupplied at stations of the section. It includes transportation of material from store depot to the site, erection andgrouting of EI Relay Racks, fixing and wiring of all the interfacing relays(vital and non-vital), laying and terminationof all types of indoor and outdoor cables for patching between existing CTR and relay racks of EI/PI to new CTRand interface relay rack of new EI as per site condition with necessary cable protection; installation and wiring ofMicroprocessors equipment, interfaced equipment, power supply equipment and all other associated accessoriesto make complete EI system to be functional. Note: (i) Technical requirements are in Specifications (ii) Contractorhas to arrange simulator/Simulation testing panel for testing and commissioning by selection table and squiresheet for each Signalling function. (iii) Installation , wiring, testing and commissioning of EI system will be done byOEM after following all the guidelines/directives issued by RDSO from time to time; This also includes Installation,wiring, testing and commissioning of IPS system suitable for 4/6 line station in RE/non RE area ,confirming toRDSO Spec No. RDSO/SPN/165(Amdr-6) or latest along with remote indication panel. Details of EI as perAnnexure 2. FAT and SAT of EI by REL/Railway will be arranged by contractor at OEM premise and at siterespectively.

At (Location) REL Andhra Pradesh 2.00 Station


Description :Supply of essential tools kit for EI as per approved list. Details of EI as per Annexure 2.



Description :Spares for equipment cost Details of EI as per Annexure 2.




Description : On-Board Survey & Design to identify location & fixing arrangement of ETCS Train borneequipment for LOCOS

At (Location) REL Andhra Pradesh 150.00 Numbers

29 6b (CP2) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR


























Description :Installation & testing of on-board eqpt as per ETCS norms and KPI




Description :Supply of essential tools & plant for ETCS On-board as per approved list





















Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng & first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 Trackside



Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng & first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 On-board



















Andhra Pradesh 14.00 Station



Description :Construction of fully furnished RBC & OCC Building in compliance to NOC/ICT/DC Infra Standardwith branded furniture, fire retardant coated walls/panels , anti-static floor, general electrical works with FRSLcables as per detailed specifications given in Section 5: Work Requirement, Volume-4, Part-II of the BidDocument(per building 4000 sqft approx.). This also includes structural design of RBC & OCC building.





Description :Civil Works in the mid-section locations in between stations to house Electronic Eqpt like AxleCounters, Power plant etc. (per section 800 sft Approx.)as per approved building plan.This also includesstructural design of building.(Number in measurement unit means number of block section which includes Up andDn both as one unit).





Description :Provision of Fire Alarm and suppression System as per details given in Section 5: WorkRequirement, Volume-4, Part-II of the Bid Document and RDSO Spec. RDSo/SPN/217/2018 Ver.2 with latestamendment for rooms in RBC and OCC Buildings. Note- Numbers(in unit) means number of rooms.














Description :Installation & Commissioning of ETCS Simulators for ETCS L-2 On-board equipment as per worksrequirement.

At (Location) VIZIANAGARAM-PALASA Andhra Pradesh 1.00 Job



Description :Installation & Commissioning of ETCS Simulators for ETCS L-2 Trackside equipment as per worksrequirement.

At (Location) VIZIANAGARAM-PALASA Andhra Pradesh 1.00 Job


Description :Additional Items required to be supplied to meet Works Requirement and Scope of Work. Anychange in SOR quantity may also be quoted as an additional item and detail breakup may be submitted.




Description :Additional Services required to be provided to meet the Works Requirement and Scope of Work.Any change in SOR quantity may also be quoted as an additional item and detail breakup may be submitted.

At (Location) REL Andhra Pradesh 1.00 Job


Description :AMC cost of all equipmentWarranty Period: 1 years, AMC Period: 5 years, Rate of Discounting: 1 %

At (Location) VIZIANAGARAM-PALASA Andhra Pradesh 1.00 Year



Description :RF Survey and Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3) Monopole,Roof top pole Installation Services Qty as per annexure 1 Alt. (Kilo meter indicated below means RKM)for 900MHz.






59 4i (CP2) Goods (Y) Non Stock --- Yes CONSIGNEE INR











61 4k (CP2) Goods () Non Stock --- Yes My ZonalApprovedSources

CONSIGNEE INR

Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA,MCPTT Client HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1 Alt.for 900 MHz.



CONSIGNEE INR






At (Location)VIZIANAGARAM-PALASASECTION


Group CP3-Contract Package - 3 for Work of Provision of Modern Train Control System Incl. LTE atJhansi(JHS)-Bina(BINA) Section of NCR (155 RKM) .



Description :Site survey to determine location of fixed balise, DPs of MSDAC and positioning of MSDACevaluators etc required for complete installation of ETCS Trackside including Signalling Systems and making roll-plan on up & Dn line.( Kilo meter indicated below means RKM)

At (Location) JHANSI-BINA Uttar Pradesh 153.00 Kilometre


Description :Supply of Balise as per approved design requirement

Consignee REL Uttar Pradesh 1.00 Lot



Consignee REL Uttar Pradesh 16.00 Station





Description :Design & supply of Power Plant and interconnecting cables, terminals, MCB, fuses, cable tray forRBC Interface for each station. Details of Power Plant as per Annexure 3.





At (Location) JHANSI-BINA Uttar Pradesh 1.00 Lumpsum



Consignee REL Uttar Pradesh 1.00 Lumpsum


Description :Spares (10%) for item no. 5 (1e).






Description :Supply of MSDAC Equipment including DPs as per RDSO Spec RDSO/SPN/176/2013 Ver.3 andlatest amendment with 100% redundancy for all equipment of MSDAC separately for each track section, includingits associated all indoor equipment, indication panel and wiring the same to integrate with RBC as per theinstructions of Engineer at site.(Number in measurement unit means number of block section which includes Upand Dn both as one unit).

Consignee REL Uttar Pradesh 19.00 Numbers



Consignee REL Uttar Pradesh 190.00 Kilometre


Description :Interface of train detection system(MSDAC) with RBC




Description :1)Installation and Commissioning of MSDAC including DPs including Interface with RBC 2)Diggingof 1.0mtr deep and0.3mtr wide trenches in all type of soils, including soft rock as per approved cable route planand back filling the trench afterlaying of cables. It includes clearing of roots of trees and bushes and temporaryobstructions on the selected cable route, ramming of soil and planting of cable marker (RFID) at every 50 mtrsand at every locations where direction of trench changes and special protection arrangements with GI/RCC pipeat track/LC crossing. The item includes covering of laid cables by sieved soil upto 5 cm before covering bybricks. Where digging of 1.0 mtr depth is not possible or depth is reduced/increased as per instructions given byengineer incharge then payment will be decreased/increased proportionately to the depth of trench. This itemincludes supply of galvanized cable markers. Note: Cable trenching between Station Limit (i.e. from Distant toDistant Signals) should be done at distance of 3.0 mtrs(minimum) from centre line of track and Outside StationLimit, cable trenching will be done at distance of 5.5 mtrs(minimum) from centre line of track. If above mentionedminimum distances are not available at site then trenching will be done by contractor as per instructions issuedby site engineer 3)Drawing/Laying of 6Quad cable including jointing in the trench/pipes. 4). Supply & laying of Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per SPECIFICATION NO. RDSO/SPN/TC/45/2012 Rev. 2.0.Theitem also includes supply and provision of all the accessories of HDPE duct like end caps, collars, bends,couplers etc. 5). Blowing/drawing of OFC cables in the HDPE duct along with all the protective work. 6). Provisionof earthing arrangement for OFC equipments. 7. This item also includes work of installation, testing andcommissioning of OFC and related electronic equipments for the work. All the materials required for earthing willbe supplied by the contractor. The value of earth will not be more than 1 ohm. If 1 ohm earth resistance is notachieved than number of pits may be increased or/and chemical treatment may be done without any additionalcost.

At (Location) JHANSI-BINA Uttar Pradesh 1.00 Job


Description :Supply of essential tools & plant as per approved list



Description :Spare (10%) for MSDAC with DP's ,Quad Cable,OFC.



Description :Supply of 2 Nos. of RBC & 1 Nos. of OCC Eqpt , RBC Interface rack & modules for stations in thesection , Power plant, cabling ,accessories, SPDs, Lightening Arrestor of class A, Networking Hardware of OCC ,client views and software.

Consignee REL Uttar Pradesh 1.00 System






Description :Installation & Commissioning of RBC and OCC System



Description :Supply of essential tools & plant for RBC and OCC as per approved list.




Description :RF Survey & Network Planning 1) EnodeB Design, Planning, Optimisation, Installation andcommissioning services. 2) Cab LTE Modem & Antenna Installation & Commissioning services. 3) Monopole,Roof Top pole Installation service.Qty as per Annexure 1.( Kilo meter indicated below means RKM)



Description :Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X200 AH @ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna. Any other itemsrequired to cover Tunnels, Bridges, Culverts, Underways etc. Qty as per Annexure 1



Description :Supply of EMS- Hardware, Local EMS clients, EMS- Software for LTE -RAN. Qty as per Annexure1




Description :NMS Design, Planning, installation and commissioning services for item no. 4c.

At (Location) BINA-JHANSI Uttar Pradesh 1.00 Job


Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA, MCPTTClient HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1






Description : Design, Manufacture & Supply of Electronic Interlocking (EI) system (with Centralized/distributedas per site arrangement) for way side stations as per Signal Interlocking Plan in "Hot Standby Architecture". EIsystem shall be provided to operate Dual VDU Control Terminal as per RDSO Specification No.RDSO/SPN/192/2005 with latest amendment and from RDSO approved source only. This includes supply of allthe material which is required to make complete EI system to be functional and as recommended by RDSO inRDSO specification;including all type of indoor and outdoor cable as per RDSO Specs for patching betweenexisting CTR & relay racks of EI/PI to new CTR & interface relay rack, Indoor relays, QBCA1/Point ContractorUnit of new EI as per site condition; This includes accessories & protection arrangements for laying andtermination; This also includes protocol convertors, embedded fanless based VDU control terminals andMaintenance terminal as per RDSO Specification no. RDSO/SPN/192/2005 with latest ammendement & RDSOTAN no. STS/E/TAN/3007 verson 1 dated 02.11.12. The display size of VDU shall be 42 inch; This also includesSMPS based integrated power supply (IPS) system suitable for 4/6 lines station. Details of EI as per Annexure 2







Description :Installation, wiring, testing and commissioning of EI System with "Hot Standby Architecture assupplied at stations of the section. It includes transportation of material from store depot to the site, erection andgrouting of EI Relay Racks, fixing and wiring of all the interfacing relays(vital and non-vital), laying and terminationof all types of indoor and outdoor cables for patching between existing CTR and relay racks of EI/PI to new CTRand interface relay rack of new EI as per site condition with necessary cable protection; installation and wiring ofMicroprocessors equipment, interfaced equipment, power supply equipment and all other associated accessoriesto make complete EI system to be functional. Note: (i) Technical requirements are in Specifications (ii) Contractorhas to arrange simulator/Simulation testing panel for testing and commissioning by selection table and squiresheet for each Signalling function. (iii) Installation , wiring, testing and commissioning of EI system will be done byOEM after following all the guidelines/directives issued by RDSO from time to time; This also includes Installation,wiring, testing and commissioning of IPS system suitable for 4/6 line station in RE/non RE area ,confirming toRDSO Spec No. RDSO/SPN/165(Amdr-6) or latest along with remote indication panel; This also includesinstallation of VDU control, Maintenance terminal and Provision of Ring Earth for EI system which includes supplyof all components of earthing & bonding system like earth electrode, earth enhancement material, earth pit, equi-potential earth bus bar, connecting cables and tape/strips and other associated accessories in accordance withRDSO Spec.No.RDSO/SPN /197/2008.Details of EI as per Annexure 2. FAT and SAT of EI by REL/ Railway willbe arranged by contractor at OEM premise and at site respectively. FAT and SAT of EI by REL/Railway will bearranged by contractor at OEM premise and at site respectively.

At (Location) REL Uttar Pradesh 16.00 Station


Description :Supply of essential tool kit for EI as per approved list.Details of EI as per Annexure 2.

Consignee REL Uttar Pradesh 16.00 Set


Description :Spares for equipment cost. Details of EI as per Annexure 2.




Description : On-Board Survey & Design to identify location & fixing arrangement of ETCS Train borneequipment for LOCOS

At (Location) JHANSI-BINA Uttar Pradesh 125.00 Numbers
















34 6g (CP3) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR






35 6h (CP3) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR





Description :Installation and testing of on-board eqpt as per ETCS norms and KPI

At (Location) JHANSI-BINA Uttar Pradesh 1.00 Lot


Description : Supply of essential tools & plant for ETCS On-board as per approved list




Description :Safety case by RDSO approved ISA to SIL-4 standard for ETCS trackside safety validation to SIL-4 by ISA.








Description :Safety Case by RDSO Approved ISA to SIL-4 Standard for integrated system Safety Validation toSIL-4 by ISA.







Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng & first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 Trackside

Consignee REL Uttar Pradesh 1.00 Job


Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng & first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 On-board

Consignee REL Uttar Pradesh 1.00 Job



Description : Training of Railway/REL Personnel at OEM premises (Abroad)

At (Location) JHANSI-BINA Uttar Pradesh 180.00 Man-Week




At (Location) JHANSI-BINA Uttar Pradesh 240.00 Man-Week







At (Location) JHANSI-BINA Uttar Pradesh 20.00 Station



Description :Construction of fully furnished RBC & OCC Building in compliance to NOC/ICT/DC Infra Standardwith branded furniture, fire retardant coated walls/panels , anti-static floor, general electrical works with FRSLcables as per detailed specifications given in Section 5: Work Requirement, Volume-4, Part-II of the BidDocument(per building 4000 sqft approx.) This also includes structural design of RBC & OCC building.

At (Location) JHANSI-BINA Uttar Pradesh 2.00 Numbers



Description :Civil Works in the mid-section locations in between stations to house Electronic Eqpt like AxleCounters, Power plant etc. (per section 800 sft Approx.) as per approved building plan. This also includesstructural design of building. (Number in measurement unit means number of block section which includes Upand Dn both as one unit).

At (Location) BINA-JHANSI Uttar Pradesh 19.00 Numbers



Description :Provision of Fire Alarm and suppression System as per details given in Section 5: WorkRequirement, Volume-4, Part-II of the Bid Document and RDSO Spec. RDSO/SPN/217/2018 Ver.2 with latestamendment for rooms in RBC and OCC Buildings.

At (Location) BINA-JHANSI Uttar Pradesh 16.00 Numbers





Description :Supply of ETCS Simulators for ETCS L-2 Trackside equipment as per works requirement




Description :Installation & Commissioning of ETCS Simulators for ETCS L-2 Trackside equipment as per worksrequirement.






Description :Additional Items required to be supplied to meet the Works Requirement and Scope of Work. Anychange in SOR quantity may also be quoted as an additional item and detail breakup may be submitted.








At (Location) REL Uttar Pradesh 1.00 Job



At (Location) JHANSI-BINA Uttar Pradesh 1.00 Year



Description : RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3)Monopole, Roof top pole Installation Services Qty as per annexure 1 Alt. (Kilo meter indicated below meansRKM)for 900 MHz.


58 4h (CP3) Goods () Non Stock --- Yes CONSIGNEE INR

Description : Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X AH@ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna for Tunnel. Anyother items to cover Tunnels, Bridges, Underways etc. Qty as per Annexure 1 Alt for 900 MHz.


59 4i (CP3) Goods () Non Stock --- Yes CONSIGNEE INR








CONSIGNEE INR

Description : CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTEANTENNA, MCPTT Client HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty asper Annexure 1 Alt. for 900 MHz.



CONSIGNEE INR






At (Location) JHANSI-BINA SECTION Uttar Pradesh 1.00 Job




Group CP4-Contract Package - 4 for Work of Provision of Modern Train Control System Incl. LTE atNagpur(NGP)-Badnera(BD) Section of CR (175 RKM).



Description :Site survey to determine location of fixed balise, DPs of MSDAC and positioning of MSDACevaluators etc required for complete installation of ETCS Trackside including Signalling Systems and making roll-plan on up & Dn line.( Kilo meter indicated below means RKM).

At (Location) NGP-BADNERA Maharashtra 175.00 Kilometre


Description :Supply of Balise as per approved design requirement.

Consignee REL Maharashtra 1.00 Lot



Consignee REL Maharashtra 24.00 Station





Description :Design & supply of Power Plant and interconnecting cables, terminals, MCB, fuses, cable tray forRBC Interface for each station. Details of Power Plant as per Annexure 3





At (Location) NGP-BADNERA Maharashtra 1.00 Lumpsum



Consignee REL Maharashtra 1.00 Lumpsum

8 1h (CP4) Goods (Y) Non Stock --- Yes RDSO CONSIGNEE INR

Description :Spares(10%) for item no.5 (1e).



Description :Supply of MSDAC Equipment including DPs as per RDSO Spec RDSO/SPN/176/2013 Ver.3 andlatest amendment with 100% redundancy for all equipment of MSDAC separately for each track section, includingits associated all indoor equipment, indication panel and wiring the same to integrate with RBC as per theinstructions of Engineer at site.(Number in measurement unit means number of block section which includes Upand Dn both as one unit).

Consignee REL Maharashtra 27.00 Numbers



Consignee REL Maharashtra 270.00 Kilometre


Description :Interface between train detection system (MSDAC) and RBC







Description :1)Installation and Commissioning of MSDAC including DPs including Interface with RBC 2)Diggingof 1.0mtr deep and0.3mtr wide trenches in all type of soils, including soft rock as per approved cable route planand back filling the trench afterlaying of cables. It includes clearing of roots of trees and bushes and temporaryobstructions on the selected cable route, ramming of soil and planting of cable marker (RFID) at every 50 mtrsand at every locations where direction of trench changes and special protection arrangements with GI/RCC pipeat track/LC crossing. The item includes covering of laid cables by sieved soil upto 5 cm before covering bybricks. Where digging of 1.0 mtr depth is not possible or depth is reduced/increased as per instructions given byengineer incharge then payment will be decreased/increased proportionately to the depth of trench. This itemincludes supply of galvanized cable markers. Note: Cable trenching between Station Limit (i.e. from Distant toDistant Signals) should be done at distance of 3.0 mtrs(minimum) from centre line of track and Outside StationLimit, cable trenching will be done at distance of 5.5 mtrs(minimum) from centre line of track. If above mentionedminimum distances are not available at site then trenching will be done by contractor as per instructions issuedby site engineer 3)Drawing/Laying of 6Quad cable including jointing in the trench/pipes. 4). Supply & laying of Pre-lubricated HDPE duct, 40 mm OD, 33 ID as per SPECIFICATION NO. RDSO/SPN/TC/45/2012 Rev. 2.0.Theitem also includes supply and provision of all the accessories of HDPE duct like end caps, collars, bends,couplers etc. 5). Blowing/drawing of OFC cables in the HDPE duct along with all the protective work. 6). Provisionof earthing arrangement for OFC equipments. 7. This item also includes work of installation, testing andcommissioning of OFC and related electronic equipments for the work. All the materials required for earthing willbe supplied by the contractor. The value of earth will not be more than 1 ohm. If 1 ohm earth resistance is notachieved than number of pits may be increased or/and chemical treatment may be done without any additionalcost.

At (Location) NGP-BADNERA Maharashtra 1.00 Job


Description :Supply of Tools & Plant as per approved list



Description :Spare (10%) for MSDAC with DP's and Quad Cable,OFC.



Description :Supply of 2 Nos. RBC and 1 No. OCC Eqpt , RBC Interface rack and modules for stations in thesection , Power plant, cabing ,accessories, SPDs, lightening arresters of class A, Networking Hardware of OCC ,client views and software

Consignee REL Maharashtra 1.00 Job



Description :Installation and Commissioning of RBC and OCC System



Description :Supply of essential tools and plant for RBC and OCC as per approved list.




Description :RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3) Monopole,Roof top pole Installation Services Qty as per Annexure 1






Description :Supply of Monopole, Roof top pole, eNodeB 2T2R INDOOR/OUTDOOR - 2/3 Sector , BasebandUnit - HW - Indoor, Remote Radio Unit (RRU)-HW (2 Sector RRU 2T-2R- HW-FD-LTE),Baseband Unit - SW(BBU S/W for 4G-FD-LTE - 5MHZ, Remote Radio Unit (RRU)-SW (2 Sector RRU 2T-2R- SW-FD-LTE-5Mhz),Site Router ( 1+1 ), Antennae for eNodeB, Installation Material for eNodeB Power System, RRU InstallationMaterial - 2/3 sector Site, Site enclosure for eNodeB Site (in case of outdoor only), Power Plant -48V, with N+1rectifier Redundancy, Battery Bank 2X200 AH @ 48V, Tower / wall mountable IP 65 Power System, Tower / wallmountable IP 65 Li-Ion Battery,Site Enclosure, Single Band -LTE 2T 2R -Narrow beam Antenna for Tunnel orother coverage Qty as per Annexure 1



Description :Supply of EMS- Hardware, Local EMS clients, EMS- Software for LTE -RAN. Qty as per Aneexure1




Description :NMS Design, Planning, installation and commissioning services for item no. 4c above.



Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA,MCPTT Client HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1






Description :Design, Manufacture & Supply of Electronic Interlocking (EI) system (with Centralized/distributedas per site arrangement) for way side stations as per Signal Interlocking Plan in "Hot Standby Architecture". EIsystem shall be provided to operate Dual VDU Control Terminal as per RDSO Specification No.RDSO/SPN/192/2005 with latest amendment and from RDSO approved source only. This includes supply of allthe material which is required to make complete EI system to be functional and as recommended by RDSO inRDSO specification;including all type of indoor and outdoor cable as per RDSO Specs for patching betweenexisting CTR & relay racks of EI/PI to new CTR & interface relay rack, Indoor relays, QBCA1/Point ContractorUnit of new EI as per site condition; This includes accessories & protection arrangements for laying andtermination; This also includes protocol convertors, embedded fanless based VDU control terminals andMaintenance terminal as per RDSO Specification no. RDSO/SPN/192/2005 with latest ammendement & RDSOTAN no. STS/E/TAN/3007 verson 1 dated 02.11.12. The display size of VDU shall be 42 inch; This also includesSMPS based integrated power supply (IPS) system suitable for 4/6 lines station. Details of EI as per Annexure 2







Description :Installation, wiring, testing and commissioning of EI System with "Hot Standby Architecture assupplied at stations of the section. It includes transportation of material from store depot to the site, erection andgrouting of EI Relay Racks, fixing and wiring of all the interfacing relays(vital & non-vital), laying & termination ofall types of indoor and outdoor cables for patching between existing CTR & relay racks of EI/PI to new CTR &interface relay rack of new EI as per site condition with necessary cable protection; installation and wiring ofMicroprocessors equipment, interfaced equipment, power supply equipment and all other associated accessoriesto make complete EI system to be functional. Note: (i) Technical requirements are in Specifications (ii) Contractorhas to arrange simulator/Simulation testing panel for testing and commissioning by selection table and squiresheet for each Signalling function. (iii) Installation , wiring, testing and commissioning of EI system will be done byOEM after following all the guidelines/directives issued by RDSO from time to time; This also includes Installation,wiring, testing and commissioning of IPS system suitable for 4/6 line station station in RE/non RE area,confirming to RDSO Spec No. RDSO/SPN/165(Amdr-6) or latest along with remote indiaction panel. Details of EIas per Annexure 2. FAT and SAT of EI by REL/Railway will arranged by contractor at OEM premise and at siterespectively.

At (Location) REL Maharashtra 15.00 Station


Description :Supply of tool kit as per Details of EI at Annexure 2

Consignee REL Maharashtra 15.00 Set


Description :Spares. As per Details of EI as per Annexure 2.



Description :On-Board Survey & Design to identify location & fixing arrangement of ETCS Train borneequipment for LOCOS


















Description :Supply of relays and valves










Description :Installation &testing of on-board eqpt as per ETCS norms and KPI

At (Location) NGP-BADNERA Maharashtra 1.00 Lot


Description :Supply of essential tools and plant for ETCS On-board as per approved list


















Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng and first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 Trackside



Description :Repair Center on floor-space made available with Industrial Ethernet connected work-stations andaccessories for tesitng and first line repair (Detailed BoQ to be given by bidder)for ETCS L-2 On-board





At (Location) NGP-BADNERA Maharashtra 180.00 Man-Week




At (Location) NGP-BADNERA Maharashtra 240.00 Man-Week







At (Location) NGP-BADNERA Maharashtra 28.00 Station



Description :Construction of fully furnished RBC & OCC Building in compliance to NOC/ICT/DC Infra Standardwith branded furniture, fire retardant coated walls/panels , anti-static floor, general electrical works with FRSLcables as per detailed specifications given in Section 5: Work Requirement, Volume-4, Part-II of the BidDocument(per building 4000 sqft approx.). This also includes structural design of RBC & OCC building.

At (Location) NGP-BADNERA Maharashtra 2.00 Numbers



Description :Civil Works in the mid-section locations in between stations to house Electronic Eqpt like AxleCounters, Power plant etc. (per section 800 sqft Approx.) as per approved building plan. This also includesstructural design of building.(Number in measurement unit means number of block section which includes Up andDn both as one unit).




Description :Provision of Fire Alarm and suppression System as per details given in Section 5: WorkRequirement, Volume-4, Part-II of the Bid Document and RDSO Spec. RDSo/SPN/217/2018 Ver.2 with latestamendment for rooms in RBC and OCC Buildings. Note- Numbers(in unit) means number of rooms.














Description :Installation & Commissioning of ETCS Simulators for ETCS L-2 Trackside equipment as perworks requirement.



Description :Additional Items required to be supplied to meet the Works Requirement and Scope of Work. Anychange in SOR quantity may also be quoted as an additional item and detail breakup may be submitted.





At (Location) REL Maharashtra 1.00 Job






At (Location) NGP-BADNERA Maharashtra 1.00 Year



Description :RF Survey & Network Planning 1) Enode B Design, Planning, Optimisation, installation andcommissioning services 2) Cab LTE Modem & Antenna installation & Commissioning services 3) Monopole,Roof top pole Installation Services Qty as per annexure 1 Alt. (Kilo meter indicated below means RKM)for900MHz.





59 4i (CP4) Goods (Y) Non Stock --- Yes CONSIGNEE INR








CONSIGNEE INR

Description :CAB LTE MODEM, Ruggedized MCPTT Handset & client software, CAB LTE ANTENNA,MCPTT Client HW for On-board PC & Display Unit, LTE Handsets with MCPTT. Qty as per Annexure 1 Alt.for 900 MHz.



CONSIGNEE INR






At (Location)NAGPUR-BADNERASECTION

Maharashtra 1.00 Job

3. T AND C

F.O.R

Description

Destination

Delivery Period




Description Delivery /Completion Rate of Supply

For all items Completion : Within 30 Months

Payment Terms

S.No Description

Payment Terms

1 As per Tender Document

4. ELIGIBILITY CONDITIONS

Standard Eligibility Criteria

S.No. Description ConfirmationRequired

RemarksAllowed

DocumentsUploading

1 As per Tender Document No No Allowed(Optional)

5. COMPLIANCE CONDITIONS

Commercial-Compliance


RemarksAllowed

DocumentsUploading

1 Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance withthe Make in India policy as incorporated in the tender conditions.

No Yes Allowed(Optional)

Technical-Compliances


RemarksAllowed

DocumentsUploading

1 As per Tender Document No No Allowed(Mandatory)

6. DOCUMENTS ATTACHED WITH TENDER

S.No. Document Name Document Description


