1 PRIMERGY BX620 S3 Server Blade Configuration Sheets About this manual A Hardware Configuration Sheet Use this form to record the hardware configuration of your server. B BIOS Setup Utility Settings Sheet Use this form to record the BIOS settings of your server. C RAID Configuration Sheet Use this form to record the logical drive definitions of RAID configuration (Array configuration). D Design Sheet Use this form to record the software settings. E Accident Sheet Use this form to record any failures that occur in your server.
30
Embed
About this manual - Fujitsu this manual A Hardware ... 512MB ( ) 1GB ( ) 2GB Memory slot 3 ( ) 512MB ( ) 1GB ( ) 2GB ... Device #1*1 XXXXXXXXX Displays the connected USB device.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PRIMERGY BX620 S3 Server Blade Configuration Sheets
About this manual
A Hardware Configuration Sheet
Use this form to record the hardware configuration of your server.
B BIOS Setup Utility Settings Sheet
Use this form to record the BIOS settings of your server.
C RAID Configuration Sheet
Use this form to record the logical drive definitions of RAID configuration (Array configuration).
D Design Sheet
Use this form to record the software settings.
E Accident Sheet
Use this form to record any failures that occur in your server.
1
2
Abbreviations
The following expressions and abbreviations are used throughout this manual.
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, and Windows Server are trademarks or registered trademarks of Microsoft Corporation in the USA and other countries. Other product names used are trademarks or registered trademarks of their respective manufacturers. Other products are copyrights of their respective manufacturers.
E Accident Sheet ................................................................................ 29
3
4
A Hardware Configuration Sheet
A Hardware Configuration Sheet
Use this form to record the hardware configuration of your server.
Place checks in the brackets provided ( ) as appropriate for your server.
Installation slot of chassis ( )
� CPU
� Memory
� Hard disk
� Expansion board
Ins tallation C PU Installed number
( ) P rocessor Xeon 5050 (3.0GHz/2x2MB)
( ) P rocessor Xeon 5060 (3.20GHz/2x2MB)
( ) P rocessor Xeon 5080 (3.73GHz/2x2MB)
*: CPU is ins talled in socket 1 for all models .
( )1* ( )2
Ins tallation s lot Ins tallation memory
Memory s lot 1 (*) 512MB ( ) 1GB ( ) 2GB
Memory s lot 2 (*) 512MB ( ) 1GB ( ) 2GB
Memory s lot 3 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 4 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 5 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 6 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 7 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 8 ( ) 512MB ( ) 1GB ( ) 2GB
*: 512MB is ins talled in memory s lot 1 and 2 for all models
(except when cus tom made service is used).
Ins talled pos ition Installation internal hard disk units
Bay 1 ( ) 36.4GB ( ) 73.4GB
Bay 2 ( ) 36.4GB ( ) 73.4GB
Ins talled expans ion board
( ) 2Gbit/s FC I /O Module (P G-FC D101)
( ) 2Gbit/s FC I /O Module (P G-FC D102)
( ) 1Gbit/s E thernet I /O Module (P G-LND101)
( ) 1Gbit/s E thernet I /O Module (P G-LND102)
B.1 Main menu
B BIOS Setup Utility Settings Sheet
Use this form to record settings of the BIOS Setup Utility in your server.
Print and record the following chart depending on your number of server blades.
When the settings have not been changed since purchase, check the "( ) Settings at time of purchase are
not changed".
The settings for the framed items in the "Settings at time of purchase"can be changed. When a setting is changed, check the bracket in the "Setting". The items in shaded regions cannot be changed.
POINT
� BIOS Setup Utility is started by the following procedures. When the message below is displayed on the screen during POST, press the [F2] key. After POST,
BIOS Setup Utility main menu appears.
If the system has started before the BIOS Setup Utility starts, press [Ctrl] + [Alt] + [Del] keys to restart
the system.
B.1 Main menu
Press F2 to run Setup Press F12 for BBS POPUP
( ) Settings at time of purchase are not changed
Setting
Sys tem O verview
A MIBIO S
V ers ion nn.nn.nn Displays the A MI BIO S vers ion.
Build Date MM/DD/YY Displays the date that the A MI BIO S is
built.
BIO S V ers ion nnnn Displays the BIO S vers ion.
BMC F/W V ers ion nnnn Displays the BMC F/W vers ion.
Sys tem T ime*1 HH:MM:SS Display/Enter current time.
Sys tem Date*1 *** MM/DD/YYYY Display/Enter current date.
Sync RTC with Mgmt. Blade Enabled ( )Disabled
Sys tem Memory
Size nnnnMB Displays the s ize of the ins talled
memory.
*1: This item can be entered when [Sync RTC with Mgmt. Blade] is set to [Disabled].
P arameters Settings at time of
purchase
5
6
B BIOS Setup Utility Settings Sheet
B.2 Advanced menu
� Peripheral Configuration submenu
� USB Configuration submenu
( ) Settings at time of purchase are not changed
Setting
A dvanced Settings
Reset C onfiguration Data No ( )Y es
> P eripheral C onfiguration To ■ P eripheral C onfiguration submenu
> P C I C onfiguration To ■ P C I C onfiguration submenu
> C PU C onfiguration To ■ C PU C onfiguration submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
P eripheral C onfiguration
Serial 1
Serial P ort1 A ddress 3F8/IRQ 4 ( )Disabled ( )2F8/IRQ 3 ( )3E8/IRQ 4
( )2E8/IRQ 3
> USB C onfiguration To ■ USB C onfiguration submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
USB C onfiguration
Module V ers ion X.XX.X-XX.X Displays the USB code vers ion of the
A MI BIO S.
USB Devices Enabled :
None Displays the number of the connec ted
USB devices .
USB Func tions 4 USB P orts ( )Disabled
USB 2 .0 C ontroller Enabled ( )Disabled
Legacy USB Support A uto ( )Disabled ( )Enabled
>USB Mass Storage Device C onfiguration*1 To ■ USB Mass Storage Device
C onfiguration submenu
Parameters Settings at time of
purchase
*1: This item appears when the USB device is connec ted.
B.2 Advanced menu
� USB Mass Storage Device Configuration submenu
� PCI Configuration submenu
( ) Settings at time of purchase are not changed
Setting
USB Mass Storage Device C onfiguration
USB Mass Storage Reset Delay*1 20Sec ( )10Sec ( )30Sec ( )40Sec
Device #1 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #2 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #3 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #4 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
*1: This item appears for the number of the connec ted USB devices .
P arameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
P C I C onfiguration
O nboard Disk O PRO M Enabled ( )Disabled
O nboard LA N 1 O PRO M Enabled ( )Disabled
O nboard LA N 2 O PRO M Disabled ( )Enabled
P C I s lot O PRO M Disabled ( )Enabled
Daughter Board O PRO M Disabled ( )Enabled
O nboard LA N 1 C ontroller Enabled ( )Disabled
O nboard LA N 2 C ontroller Enabled ( )Disabled
Parameters Settings at time of
purchase
7
8
B BIOS Setup Utility Settings Sheet
� CPU Configuration submenu
B.3 Security menu
( ) Settings at time of purc has e are not c hanged
Setting
C onfigure A dvanc ed C P U s ettings
M odule V ers ion:XX.XX D is plays the C P U c ode vers ion of the
A M I BIO S.
C 1 E Support D is abled ( )E nabled
H ardware P refetc her E nabled ( )D is abled
A djac ent C ache L ine P refetch E nabled ( )D is abled
V anderpool T ec hnology D is abled ( )E nabled
E xecute D is able B it D is abled ( )E nabled
I ntel(R) SpeedStep(tm) tec h. D is abled ( )M aximum Speed ( )M inimum Speed
( )A utomatic
I ntel(R) C -ST A T E tec h. D is abled ( )E nabled
P arameters Settings at time of
purc has e
( ) Settings at time of purchase are not changed
Setting
Security Settings
Supervisor P assword Not Ins talled Displays whether the Supervisor
Password is set or not.
User P assword Not Ins talled Displays whether the User P assword is
set or not.
C hange Supervisor P assword Set a Supervisor P assword.
C hange User P assword Set a User P assword.
C lear User P assword*1 P ress ing the [Enter] key will delete the
User P assword.
P assword C heck*2 Setup ( )A lways
Supervisor P assword Lock*2 Standard ( )Extended
*1: This item appears when [User P assword] is spec ified.
*2: This item appears when [Supervisor P assword] or [User P assword] is spec ified.
P arameters Settings at time of
purchase
B.4 Server menu
B.4 Server menu
� ASR&R submenu
( ) Settings at time of purchase are not changed
Setting
Server C onfiguration
P os t E rrors Enabled ( )Disabled
> A SR&R To ■ A SR&R submenu
> C PU Status To ■ C PU Status submenu
> Memory Status To ■ Memory Status submenu
> C onsole Redirec tion To ■ C onsole Redirec tion submenu
> Sys tem Information To ■ Sys tem Information submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
A SR&R
O S Boot Watchdog T imer Disabled ( )Enabled
T imer C ount Down V alue*1 10 M inutes ( )2 M inutes ( )5 M inutes
( )15 M inutes ( )20 M inutes
( )30 M inutes ( )60 M inutes
( )100 M inutes
T imer C ount A c tion*1 Reset ( )No A c tion ( )P ower O ff
( )P ower C yc le
Boot Retry C ounter Retry 3 T imes ( )No Retry ( )Retry 1 T ime
( )Retry 2 T imes ( )Retry 4 T imes
( )Retry 5 T imes ( )Retry 6 T imes
( )Retry 7 T imes
A SR&R Boot Delay(M inute) 2 ( ) Enter a number 0 to 30
A fter P ower Failure Las t State ( )Stay O ff ( )P ower O n
Settings at time of
purchase
*1: This item appears when [O S Boot Watchdog T imer] is set to [Enabled].
P arameters
9
1
B BIOS Setup Utility Settings Sheet
� CPU Status submenu
� Memory Status submenu
� Console Redirection submenu
( ) Settings at time of purchase are not changed
Setting
C PU Status
C PU1 Status : Enabled ( )Disabled ( )Failed*1 ( )Empty*2
C PU2 Status : Enabled ( )Disabled ( )Failed*1 ( )Empty*2
Hyper Threading Technology Disabled ( )Enabled
*1: This setting appears when C PU IERR occurs . C an be changed to [Enabled] only.
*2: This setting appears when C PU is not ins talled.
P arameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
Memory Status
Memory M irror Disabled ( )M irror
DIMM 1 ,2 Enabled ( )Disabled
DIMM 3 ,4 Enabled ( )Disabled
DIMM 5 ,6 Enabled ( )Disabled
DIMM 7 ,8 Enabled ( )Disabled
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
C onfigure Remote A ccess type and Parameters
C om Port A ddress O n-board C O M A ( )Disabled
P rotocol A NSI ( )V T100 ( )V T -UTF8 ( )V T100+
Flow C ontrol XO N/XO FF
Mode Enhanced ( )Standard
Parameters Settings at time of
purchase
0
B.5 Boot menu
� System Information submenu
B.5 Boot menu
( ) Settings at time of purchase are not changed
Setting
Sys tem Information
Manufac turer: **** Displays the name of the ins talled C PU
vendor.
Brand String : **** **** *** *** Displays the ins talled C PU name and
frequency.
Frequency : n.nnGHz Displays the C PU frequency.
FSB Speed : nnnMHz Displays the FSB speed.
Stepping : *** Displays the C PU s tepping.
C ache L1 : nn KB Displays the C PU L1 cache.
C ache L2 : nnnn KB Displays the C PU L2 cache.
O n Board LA N1 Mac A ddress : nn:nn:nn:nn:nn:nn Displays the MA C address of O n Board
LA N1.
O n Board LA N2 Mac A ddress : nn:nn:nn:nn:nn:nn Displays the MA C address of O n Board
LA N2.
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
Boot Settings
Bootup Num-Lock O n ( )O ff
> Boot Device P riority To ■ Boot Device P riority submenu
> Hard Disk Drives *1 To ■ Hard Disk Drives submenu
> Removable Drives *1 To ■ Removable Drives submenu
> C D/DV D Drives *1 To ■ C D/DV D Drives submenu
Parameters Settings at time of
purchase
*1: This item appears when a device is connec ted.
11
1
B BIOS Setup Utility Settings Sheet
� Boot Device Priority submenu
� Hard Disk Drives submenu
( ) Settings at time of purchase are not changed
Setting
Boot Device P riority (Fill in Boot priority)
1s t Boot Device USB:Y -E USB FDU ( )USB:Y -E USB FDU
2nd Boot Device USB:GENERIC C DR*** ( )USB: V irtual Floppy*1