Our Lady & St John Vocational Centre LEARNER NAME ASSESSOR NAME DATE ISSUED HAND IN DATE SUBMITTED ON Criteria Task/ Evidence Achieved P1 (part) - Extract information from engineering drawings and related documentation to enable a given task to be carried out. Completed task one Observation records from practical task Completion of workbook section 2 P2 (part) - Select and use other information sources to support and check information provided. Completed task one Observation records from practical task M1 - Identify gaps or deficiencies in the information obtained that need to be resolved to enable a given task to be carried out. Completed task two D1 - Justify valid solutions to meet identified gaps or deficiencies with the information obtained. Completed task two Edexcel BTEC Level 2 Extended Certificate in Engineering FX533 UNIT 2 – INTERPRETING & USING ENGINEERING INFORMATION (T/600/0378) ASSIGNMENT ONE – EXTRACTING ENGINEERING INFORMATION (MECH)
19
Embed
olsjdt.files.wordpress.com › 2013 › 03 › assignm… · Web viewASSIGNMENT ONE – Extracting engineering information (mech) Health and safety legislation, regulations and safe
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Our Lady & St John Vocational Centre
LEARNER NAME ASSESSOR NAME
DATE ISSUED HAND IN DATE SUBMITTED ON
Criteria Task/ Evidence Achieved
P1 (part) - Extract information from engineering drawings and related documentation to enable a given task to be carried out.
Completed task one Observation records from practical
task Completion of workbook section 2
P2 (part) - Select and use other information sources to support and check information provided.
Completed task one Observation records from practical
task
M1 - Identify gaps or deficiencies in the information obtained that need to be resolved to enable a given task to be carried out.
Completed task two
D1 - Justify valid solutions to meet identified gaps or deficiencies with the information obtained.
Completed task two
This brief has been verified as fit for purposeInternal Verifier A.SpicerSignature A J
SpicerDate 14/09/2012
Assessor's commentsQualification Level 2 Ext Cert in Engineering Assessor
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
UNIT 2 – INTERPRETING & USING ENGINEERING INFORMATION (T/600/0378)ASSIGNMENT ONE – EXTRACTING ENGINEERING INFORMATION (MECH)
Our Lady & St John Vocational Centre
name
Unit number and title 2 – Interpreting & Using Engineering Information (T/600/0378)
Learner name
Assignment title
ASSIGNMENT ONE – Extracting Engineering Information (Mechanical)
Grading criteria Achieved?
P1 (part) - Extract information from engineering drawings and related documentation to enable a given task to be carried out.P2 (part) - Select and use other information sources to support and check information provided.M1 - Identify gaps or deficiencies in the information obtained that need to be resolved to enable a given task to be carried out.D1 - Justify valid solutions to meet identified gaps or deficiencies with the information obtained.
Learner feedback
Assessor feedback
Action plan
Assessor signature Date
Learner signature Date
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
ASSIGNMENT INTRODUCTION The ability to access and use information is probably one of the most critical skills required in engineering. This unit will enable learners to understand how to make effective use of textual, numeric and graphical information when working with engineering drawings, technical manuals, reference tables, specifications, charts or electronic displays, in accordance with approved procedures. Learners will consider how best to extract information from engineering drawings and related documents and also how to use drawings and related documentation to establish the work that needs to be done, carry out the work requirements and check their own work output. A good, well-documented product, is generally more useful and more successful than an excellent product that has been poorly documented. But simply creating engineering drawings and recording engineering data is insufficient. To be useful, engineering drawings and related documentation must be stored, reviewed and approved, published and maintained. Document control for engineering drawings comprises document attributes as well as a clearly defined control process.
This unit will enable learners to identify, work within and comply with appropriate organisational policies and procedures for obtaining and using the documentation that applies to given activities. It is expected that learners will be able do this with minimum supervision, taking responsibility for their own actions and the quality and accuracy of the work that they undertake.
ASSIGNMENT BRIEF
You are a recently qualified Engineer now working for a Small company that makes products for an Engineering Merchants
You have been asked to manufacture a prototype for a clamping device.
Your task is to now carefully study the drawing pack given to you with this assignment brief, then, answer the questions requiring you to extract information from the Engineering drawings and other sources in order to be able to begin to manufacture the clamping device.
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
1. Extracting information from the G Clamp assembly drawing, complete the parts table below by adding the part names and the quantity required for each part
2. What is the drawing number for the G Clamp assembly drawing?
………………………………………………………………………………………
3. Dimension the rectangle below to show the minimum size of material blank required in order too manufacture the G Clamp body
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
1. Explain why it is necessary to create two Datum edges (datum A & datum b) in order to accurately mark out the G Clamp Body.
4. Using the extract from the Zeus tapping drill chart state what is the recommended drill size for an M8 threaded hole.
………………………………………………………………………………………
Explain why the hole diameter recommended smaller than 8mm? ………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………
5. Using the extract from the Zeus tapping drill chart state what is the recommended drill size for the following threaded holes.
a. M2.0 x pitch 0.25 …………………………………………………….
b. M4.0 x pitch 0.50 …………………………………………………….
c. M6.0 x pitch 1.00 …………………………………………………….
d. M10 x pitch 1.50 …………………………………………………….
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
TAPPING DRILL CHART
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
6. What material should the ‘Thread Foot’ part be manufactured from?
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
13.What material is the part ‘Handle End’ to be manufactured from?
………………………………………………………………………………………
14.From the list below choose the most suitable diameter stock bar required to produce the part
10mm 15mm 25mm 19mm
15.What is the issue number of this drawing?
………………………………………………………………………………………
TASK TWO (M1 & D1)
Study the following images of drawings found in the Engineering Drawing workshop & identify any reasons why the product may not be able to be made using them. This may be that some important information is missing or that the drawing is damaged or has graffiti covering important dimensions
For each of the examples given, state the key issue found and a valid solution to this problem.
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533
Our Lady & St John Vocational Centre
Edexcel BTEC Level 2 Extended Certificate in Engineering FX533