SPECIFICATION INSTALLATION INSTRUCTIONS Note Note PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT Rotaplay 6020-083 (883) 6 - 12 Years 1000mm Approx 103 Kg Approx 132 Kg 6020-083(883) Page 1 of 8 Ø1240 x 1050mm High Solid steel components made from steel to BS 970 Part 1 (1983) Tubing made from medium Nominal Bore Tube to BS 1387 Standard fasteners are plated and made to one of the following specifications:- BS 3692 (1697), BS 4190 (1967) Non-standard fasteners are corrosion resistant and designed to deter vandals Welds are from copper free wire to BS EN 440 (1995) Metal parts coated with low lead polyester powder paint to BS EN 71 part 3 (1995) 1. Read instructions thoroughly before commencing installation of unit. 2. Excavate foundations as shown on the foundation plan. 3. Position the below ground fixing in the prepared hole, ensuring that it is vertical and at the correct height. 4. Backfill with 0.162 cubic m concrete (4 parts gravel, 2 parts sand & 1 part cement). 5. Allow concrete to set for a period of 48 hours. 6. Once foundations have set, position the bearing unit and attach to below ground fixing. Make sure bearing unit cover is in position before fixing down to ground fixing. Ensure that all fasteners are fully tightened. ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE! (Polydek Foot Plate) Solar Spinner
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SPECIFICATION
INSTALLATION INSTRUCTIONS
Note
Note
PROD. CODE
SIZE
AGE RANGE
F/ FALL HEIGHT
HEAVIEST PART
TOTAL WEIGHT
Rotaplay
6020-083 (883)
6 - 12 Years
1000mm
Approx 103 Kg
Approx 132 Kg
6020-083(883)Page 1 of 8
Ø1240 x 1050mm High
Solid steel components made from steel to BS 970 Part 1 (1983)Tubing made from medium Nominal Bore Tube to BS 1387Standard fasteners are plated and made to one of the following specifications:-BS 3692 (1697), BS 4190 (1967)Non-standard fasteners are corrosion resistant and designed to deter vandalsWelds are from copper free wire to BS EN 440 (1995)Metal parts coated with low lead polyester powder paint to BS EN 71 part 3 (1995)
1. Read instructions thoroughly before commencing installation of unit.
2. Excavate foundations as shown on the foundation plan.
3. Position the below ground fixing in the prepared hole, ensuring that it is vertical and at the correct height.
4. Backfill with 0.162 cubic m concrete (4 parts gravel, 2 parts sand & 1 part cement).
5. Allow concrete to set for a period of 48 hours.
6. Once foundations have set, position the bearing unit and attach to below ground fixing. Make sure bearingunit cover is in position before fixing down to ground fixing. Ensure that all fasteners are fully tightened.
ENSURE ALL INSTALLATION AIDS ARE REMOVED BEFORE FIRST USE!
(Polydek Foot Plate)Solar Spinner
6020-083(883)
Page 2 of 8
Foundation Detail(Care must be taken in abnormal conditions)
Wetpour
Bark
Square
Square
Bark
FSL
FSL
73
0
450
Wetpour SafetySurfacing
Concrete foundation
Below ground fixing(4201-539)
Brick
400597
Bark SafetySurfacing
Concrete to berounded off
Concrete foundation
Below ground fixing (Bark)(4201-560)
Brick 450
109
0
40
0
79
0
FSL=Finished Surface Level
40
0(1
60
)
(160
)
Min
Min
A ( 1 : 5 )
6020-083(883)
Page 3 of 8
A
Free Space
Fixing Details For MaintenanceFoot Plates and Seat Panel to Frame
5400Ø
200
6
1.10
1.13
1.8
1.14
1.91.5
1.101.13
1.4
1.9
1.14
1.16
6020-083(883)
Page 4 of 8
Fixing Details For MaintenanceFrame to Bearing Unit
Below ground fixing to be concreted in to ground 48 hours prior toattaching bearing assembly. Shown here for clarity purposes only.
Fixing Details For MaintenanceFrame/Bearing Assembly to Below Ground Fixing
B
Bearing unit
Frame
1.11
1.15
1.12
1.11
1.6
1.7
1.3
3
4
5
2
Below groundfixing
Bearing assembly
Hole in cup to beopened to dia 13for M12 fixing
BOLT MUST BESPECIFIEDLENGTH ONLY!
6020-083(883)
Page 5 of 8
Fixing Details For MaintenanceBearing Assembly
M8 x 25mm Pent Button HD
Seating Flange Fabrication
Spherical CastingSeal Ring
RHP-SNP50 Self Lubricating BearingBearing Spacer Ring