5200 SERIES QWIK CONVEYOR SYSTEM 5200 Series QWIK Conveyor General Specifications: • Anodized aluminum frame members • Straight Flat and Cleated Modular Plastic Belt models • Curved Flat Plastic Modular Belt Models Curves 15-180 degrees, 15 degree increments • Fixed angle Z-frame: Standard angles: 5°, 10°, 15°, 30°, 45°, 60° Custom angles available in 5° increments • Conveyor Widths: Curves: 8” (203 mm) – 36” (914 mm) in 2” increments Straights: 8” (203 mm) – 60” (1524 mm) in 2” increments Z-frame Curves: 8” (203 mm) – 24” (610 mm) in 2” increments Z-frame Straights: 8” (203 mm) – 24” (610 mm) in 2” increments • Conveyor Lengths: 3’ (914 mm) – 99’ lengths (30,175 mm) in 1” increments • Belt Speed: Up to 250 ft/min • Load Capacity: Curves: up to 500 lbs. (226 kg) Straights: up to 1000 lbs. (453 kg) Z-frame Curves: up to 500 lbs. (226 kg) Z-frame Straights: up to 1000 lbs. (453 kg) • models available DORNER MFG. CORP. PO Box 20 • 975 Cottonwood Ave. Hartland, WI 53029 USA InSIde tHe USA tel: 800.397.8664 fAx: 800.369.2440 OUtSIde tHe USA tel: 262.367.7600 fAx: 262.367.5827 www.dorner.com [email protected] DORNER MFG. CORP. PO Box 20 • 975 Cottonwood Ave. Hartland, WI 53029 USA InSIde tHe USA tel: 800.397.8664 fAx: 800.369.2440 OUtSIde tHe USA tel: 262.367.7600 fAx: 262.367.5827 www.dorner.com [email protected] FLOW 5200 Series Configurations Now Available: • Straights • Curves • Declines • Horizontal to Decline • Horizontal to Incline • Z-framed • Z-framed with curves QWIK Configuration QWIK System Setup QWIK Delivery