5/2 Directional Control Valves Nominal sizes 6 and 12 For double-acting cylinders Solenoid pilot operated soft seal spool valves NAMUR pattern flange mounting (size 6) G 1/4 or G 1/2 internal thread connection Operating pressure max. 10 bar (see parameters) Catalog Register P 11 Publication 7502516.06.12.93 Description Solenoid valves for filtered, lubricated 1) or non-lubricated air Flow direction: Fixed Temperature range: –10 to +60 °C Material used: – Housing: Aluminium – Solenoid pilot flange: POM – Seals: NBR (Perbunan) Features lHigh flow rate lSimple design lStraight-through flow, high Cv-factor lMaintenance free lEasily interchangeable solenoid system lCompact design lWith or without manual override lPower consumption of 3 W standard 1) Ölempfehlung: Shell Hydrol DO 32, ESSO Febis K 32 (Stand 07/92) oder vergleichbare Öle mit DVI-Werten < 8 (DIN 53521) und ISO-Viskositätsklasse 32-46 (DIN 51519). IMI Norgren-Herion Fluidtronic GmbH & Co. KG, D-70731 Fellbach Stuttgarter Straße 120, D-70736 Fellbach ⋅ Tel.: +49 (0)7 11 / 52 09-0 ⋅ Fax: +49 (0)7 11 / 52 09-6 14
8
Embed
5/2 Directional Control Valves - files.eurotec-shop.comfiles.eurotec-shop.com/2636047_en.pdf · 5/2 Directional Control Valves ... Ölempfehlung: Shell Hydrol DO 32, ESSO Febis K
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
5/2 Directional Control ValvesNominal sizes 6 and 12For double-acting cylindersSolenoid pilot operated soft seal spool valvesNAMUR pattern flange mounting (size 6)G 1/4 or G 1/2 internal thread connectionOperating pressure max. 10 bar (see parameters)
Catalog Register P 11
Publication 7502516.06.12.93
DescriptionSolenoid valves for filtered, lubricated1) or non-lubricatedair
Flow direction: FixedTemperature range: –10 to +60 °CMaterial used:– Housing: Aluminium– Solenoid pilot flange: POM– Seals: NBR (Perbunan)
FeatureslHigh flow ratelSimple design lStraight-through flow, high Cv-factorlMaintenance freelEasily interchangeable solenoid systemlCompact designlWith or without manual overridelPower consumption of 3 W standard
1) Ölempfehlung: Shell Hydrol DO 32, ESSO Febis K 32 (Stand 07/92) oder vergleichbare Öle mit DVI-Werten < 8 (DIN 53521) undISO-Viskositätsklasse 32-46 (DIN 51519).
1) 2 mounting bolts M5 x 35 (DIN 912 - 8.8 A2J) included in delivery.2) Pressure head at R ≤ operating pressure minus 1 bar.
2 7502516.06.12.93
Cat. No. (example): Valve Solenoid State voltage [V] and frequency [Hz]2636047. 0240
1) Inrush2) Holding
NAMUR fitting accessories
Designation Application For additionalinformationsee publication
Weight
[kg]
Cat. No.
Flange plate Direct attachment to pneumatic lifting drives with NAMURridge; in case of wall mounting, dependent on position ofpiping
HERION7502242
0.49 0559857
Clamp Used in conjunction with flange plate for attachment topneumatic lifting drives with NAMUR post
0.10 0540593
Spacer plate Direct attachment to pneumatic swivel drives,e.g. when using a solenoid with terminal boxCat. No. 0788 or 0789;dependent on type of attachment
0.25 0540109
Adapter plate Direct attachment to pneumatic swivel drives with holepattern corresponding to older type valve:Cat. No. 2636055, 2636056, 2636064
0.18 0559853
Silencer Pressure connection G 1/4; max. back pressure 6 bar HERION7501080
0.01 0014600
Solenoid parameters
Standard voltage 24 V. Further voltages and types on request.Design to VDE 0580 or VDE 0171/ EN 50014,EN 50028. 100% duty cycle.Picture Power
consumptionRatedcurrent[mA]
Tolerance[%] ratedcurrent
Protectionclass
Ambienttemperature
Fluidtemperature
Weight Dimen-sionaldrawing
Circuitdiagram
Cat. No.
[W]DC
[VA]AC DC AC + – [°C] [°C] [kg] No. No.
2.7
–
–
101) 4.42)
112
–
–
451)
202)
10
10
10
10
IP 65 –25 to+55
to +80 0.18 03
03
01
01
0240
0241
3.2 – 135 – 10 15 IP 65EEx m II T4
–25 to+40
to +55 0.4 04 04 0278
– 4.4 – 183 10 15 04 07 0279
3.9 – 161 – 10 15 IP 65EEx em II T5or T6
–25to +80 at T5to +60 at T6
0.83 05 04 3910
– 2.9 – 140 10 15 IP 65EEx em II T5or T6
–25to +80 at T5to +60 at T6
0.83 05 07 3911
7502516.06.12.93 3
Sectional drawings
01
1 Body assly. 7 Solenoid11 Union12 Disk15 Piston assly.21 Pilot valve22 O-ring31 Screw33 Socket-head screw34 Coding stud
Spare parts on request
02 1 Body assly. 7 Solenoid11 Union12 Disk15 Piston assly.21 Pilot valve22 O-ring31 Screw33 Socket-head screw34 Coding stud