| 1 430 435 Compact Excavators
| 1
430 435 Compact Excavators
2 |
Improve your swing... and your driveContractors... Landscapers... Utilities... Rental Operators...
The Bobcat 430 and 435 are the world’s fi rst compact excavators with
Zero Tail Swing (ZTS) and the FastTrack™ drive system — and they’re
ready to take on the biggest challenges you can throw at them!
Load-sensing
An axial piston pump with load-sensing in combination with a load-independent fl ow division system enables
simultaneous, independent control of all movements.
| 3
435 Long Dipperstick Option
The long dipperstick on the 435 extends
reach by 317 mm and dump height by 242
mm, providing a maximum reach of 5961 mm,
and a maximum dump height of 3889 mm.
430 Long Dipperstick Option
The long dipperstick version of the 430 gives you an additional 305
mm of reach and 178 mm of dump height, resulting in a maximum
reach of 5395 mm, and a maximum dump height of 3305 mm.
The longer dipperstick reaches farther from one spot to do more work without repositioning the machine. The extra reach,
combined with a higher dump height, also makes loading trucks faster and easier.
Optional long dipperstick
4 |
Compact and Versatile
Zero Tail Swing
Many competing excavators offer Zero Tail Swing, but the 430 and
435 take the concept to the next level. Not only does the rear of the
machine stay within the excavator’s width, so does the front end
— the machine’s left and right front corners! This design decreases the
chances of accidentally striking buildings or trees during operation,
And no damage to the machine or surrounding objects means lower
operating costs!
Tight Spaces — No Problem
Bobcat Zero Tail Swing also permits easier spoil placement in tight
quarters. If necessary, the operator can slew completely around and
dump spoil behind the machine. The Bobcat ZTS design allows a zero
radius swing range of 320 degrees. This makes the 430/435 ideal for
jobsites where manoeuvrability in small spaces is a must.
FastTrack™ Drive System
With the innovative FastTrack system, dedicated axial piston pumps power the travel motors to give you jobsite
advantages that competing machines can’t even come close to. Smooth, precise turns, maximum torque control,
unmatched travel speed.
In fact, the travel speed of the 430/435 FastTrack is nearly twice the speed of the nearest competitor. You can move the
430 and 435 FastTrack much faster within and between jobsites. Low-range speeds eliminate the need to shift between
speed ranges on most backfi lling projects. The 430/435 FastTrack grade, doze and backfi ll faster than other machines.
And because you have more predictable control of the drive system, loading and unloading trailers is also much easier.
Zero Tail Swing
gives you 320
degrees of
unrestricted
Rotation
| 5
Dual-Cylinder Dozer Blade with Float
How’s this for standard equipment? The versatile dozer blade is not
only invaluable for backfi lling, dozing and leveling, it also serves as a
stabilizer and improves lift capacity when lifting loads over the front
of the excavator.
Impressive Digging Force
The 430 and 435 deliver plenty of power for bigger jobs — excavation,
trenching, demolition, material handling — and an exceptional
digging force!
Features that make the difference
Operator Comfort
The spacious cab provides plenty of head
room, leg room and elbow room for even
the biggest operators. A wide door opening
allows easy entry and exit.
Serviceability
Access to machine components for routine
maintenance and service is exceptional
because of the swing-open rear tailgate and
fl ip-up side access hood.
Thumb-Control Auxiliary Hydraulic System
A Bobcat exclusive. Variable fl ow, continuous fl ow, direction of fl ow:
all auxiliary hydraulic functions are controlled by two convenient
switches on the right joystick.
• Flow rate adjusts from zero to full fl ow.
• Variable fl ow for precision control of attachments.
• For continuous fl ow, the operator does not have to constantly press
or hold a control mechanism.
Advanced steering system
Tracks distribute the machine’s weight over
a large area, reducing ground pressure and
minimizing damage to lawns and other
surfaces. Tracks also allow the excavator to
perform where rubber-tired machines bog
down. The result — more working days per
year.
Cab Height
The 430 is less than 2450 mm high, a critical
limit for transportation.
6 |
52295097
2365
3522
3066
45713125
2175
121°
186°
120027°
546
4755
3305
2604
239353955507
3520
3366
186°
121°
150027°
534
57575611
2428
5346
3649
2568
183°
123°3970
3420
26°
534
128°
60965961
2553
183°
3970
3772
534
26°
123°
2883
5588
3889128°
4925
3754
22581669
1801 392
2426
1780
320
430
1522
5258
4023
2496
19321843
442
2541
1930
400
435
1644
Dimensions & Working range
All dimensions in mm.
Working range 430
Working range 430 long arm
Working range 435
Working range 435 long arm
| 7
Specifi cations
Spec
ific
atio
ns
and
des
ign
are
su
bje
ct t
o c
han
ge
wit
ho
ut
no
tice
. P
ictu
res
of
Bo
bca
t u
nit
s m
ay s
ho
w o
ther
th
an s
tan
dar
d e
qu
ipm
ent.
430 430 FastTrack™ 435 435 FastTrack™ WeightsOperating weight with ROPS canopy 3584 kg 3640 kg 4788 kg 4788 kg
Additional weight for cab with heater 138 kg 138 kg
Additional weight for cab with HVAC 161 kg 161 kg
Additional weight for steel tracks 45 kg 33 kg
Additional weight for long dipperstick 106 kg 112 kg
EngineMake / model Kubota / V2203-M-DI-E2B-BC-1 Kubota / V2003-M-DI-TE2B-BC-1
Fuel / Cooling Diesel / Liquid Diesel / Liquid
Maximum power at 2400 RPM (DIN 70020) 31.9 kW 36.5 kW
Maximum torque (SAE J1349 Gross) 144.2 Nm 169.6 Nm
Number of cylinder 4 4
Displacement 2.2 l 2.0 l
Bore / Stroke 87.0 mm / 92.4 mm 83.0 mm / 92.4 mm
Alternator 12 V — 90 A — open frame with internal regulator 12 V — 90 A — open frame with internal regulator
Starter 12 V — gear reduction type — 2.0 kW 12 V — gear reduction type — 2.0 kW
ControlsSteering Direction and speed controlled by two pilot-operated hand levers or foot pedals
Hydraulic SystemPump type
Dual-outlet variable displacement piston with gear pumps
Piston pump with pressure compensating, load sensing and torque limiter controls, external gear pump
Piston pump capacity 76.4 l/min 2 x 38.2 l/min 112.5 l/min 112.5 l/min
Gear pump capacity 28.8 l/min 29.0 l/min 35.2 l/min 35.2 l/min
Auxiliary fl ow 62.1 l/min 62.1 l/min 75.0 l/min 75,0 l/min
Control valveEight-spool, individually compensated type, closed
centreNine-spool, individually compensated type, closed
centre
PerformanceDigging force, standard dipperstick 17099 N 23406 N
Digging force, long dipperstick 14719 N 20128 N
Digging force, bucket 30541 N 35105 N
Drawbar pull 37800 N 46657 N
Ground pressure with standard dipperstick and rubber tracks
28.5 kPa 29.0 kPa - -
Ground pressure with standard dipperstick and steel tracks
29.5 kPa 29.4 kPa - -
Ground pressure with long dipperstick and rubber tracks
29.6 kPa 29.9 kPa - -
Ground pressure with long dipperstick and steel tracks
30.0 kPa 30.2 kPa - -
Travel speed, low range 2.4 km/h 4.2 km/h 2.9 km/h 4.5 km/h
Travel speed, high range 4.7 km/h 8.0 km/h 4.8 km/h 8.7 km/h
Maximum digging depth, standard dipperstick 3066 mm 3420 mm
Maximum digging depth, long dipperstick 3366 mm 3772 mm
Slew SystemBoom swing, left 90° 90°
Boom swing, right 50° 50°
Slew circle Single row shear-type ball bearings with internal gear Single row shear-type ball bearings with internal gear
Slew drive Orbit motor connected to a planetary drive Radial piston motor with brake
Slew rate 8.8 RPM 9.3 RPM
TractionTrack width 320 mm 400 mm
Number of track rollers per side 1 top, 5 bottom 1 top, 5 bottom
Gradeability 30° 30°
BrakesTravel brake Spring applied, hydraulically released, multi-disk brake
Slew brake Hydraulic lock on motor and pin lock
Fluid CapacitiesCooling system 17.0 l 36.0 l
Engine lubrication plus oil fi lter 7.1 l 7.1 l
Fuel reservoir 67.4 l 67.4 l
Hydraulic reservoir 36.7 l 29.9 l
Hydraulic system with bucket and dipper cylinder retracted, bucket on the ground, and blade down
51.1 l 54.2 l
8 | www.bobcat.eu PEFC/07-31-77
Bobcat EMEADrève Richelle 167
B-1410 Waterloo, Belgium
©2008 Bobcat EMEA 4471390-EN (02-08)