4‑243 Hinge Pr01 180° 4‑350 Hinge Pr01 180° torzijski.pdf · M4 screw DIN-EN-ISO 4762 •Fastening door part: for example with M4 countersunk screw DIN-EN-ISO 10642. Material:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
3D Hinge adjustable for nested/flush doors. Adjustable in : height ±2mm (0,079) width ±2mm (0,079) depth ±2mm (0,079)
Material:• Hinge parts:
zinc die, untreated (zinc coloured) or black coated
• Base‑plate:steel, zinc plated
• Bushings:PA, natural
• Pin:brass, untreated or stainless steel
• Washers:stainless steel
• Slotted screw:steel, zinc plated or stainless steel
*Base plate:steel black coated
• Adjustment screws:stainless steel
Version surface not plated (zinc finish)
surfaceblack coated
3 D Hinge with pin brass, untreatedRH version (as drawn) 217‑9402 217‑9405LH version (mirror view) 217‑9403 217‑9406Not assembled for RH and LH 217‑9404 217‑9407
3 D Hinge with pin stainless steelRH version (as drawn) 217‑9408 217‑9411LH version (mirror view) 217‑9409 217‑9412Not assembled for RH and LH 217‑9410 217‑9413
270° hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain.• Without any engagement.• Springback typically < 1°• Constant torque throughout its fully
range of motion.• Life of > 20.000 cycles• RH and LH application.• Applications: Office Equipment,
270° hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain.• Without any engagement.• Springback typically < 1°• Constant torque throughout its fully
range of motion• Life of > 20.000 cycles• RH and LH application.• Applications: Office Equipment,
270° Hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain.• Without any engagement.• Springback typically < 1°• Constant torque throughout its fully
range of motion• Life of > 10.000 cycles• RH and LH application.• Applications: Office Equipment,
360° hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain.• Without any engagement.• Springback typically < 1°• Constant torque throughout its fully
range of motion• Life of > 20.000 cycles• Applications: Office Equipment,
• Fastening frame part: for example with M4 screw DIN-EN-ISO 4762
• Fastening door part: for example with M4 countersunk screwDIN-EN-ISO 10642.
Material:• Frame part and Door part:
zinc die, black coated• Shaft and torque clips:
hardened steel
360°
Version clockwise counter clockwise Part No.Torque Hinge LH (as drawn) 5.00Nm 3.25Nm 703‑9004.00‑00325*Torque Hinge RH 3.25Nm 5.00Nm 703‑9005.00‑00325** Price and delivery time on request
360° hinge with constant torque throughout its full range of motion. The object (door, monitor) may be moved into any position and with remain.• Without any engagement.• Springback typically < 1°• Constant torque throughout its fully
• Fastening: for example with M4 screw DIN-EN-ISO 4762
Material:• Frame and Door‑part:
zinc die, black coated• Shaft and torque clips:
hardened steel
360°
Version clockwise counter clockwise Part No.Torque Hinge 5.00Nm 3.25Nm 703‑9009.00‑00325*Torque Hinge 3.25Nm 5.00Nm 703‑9010.00‑00325** Price and delivery time on request
270° Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 – 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6.• Without any stop.• Adjustable torque • Constant torque throughout its fully
range of motion• RH and LH application.
• Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation.
270° Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 – 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. • Without any stop.• Adjustable torque • Constant torque throughout its fully
range of motion.• RH and LH application.
• Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation.
270° Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 – 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6.• Without any stop.• Adjustable torque • Constant torque throughout its fully
range of motion• RH and LH application.
• Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation.
270° Hinge with unchanging torque throughout its full range of motion. Continuously adjustable torque 0 – 5Nm. The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as coverstays for light duty application. Installation with hexagon screws or hexagon nuts M6. • Without any stop.• Adjustable torque • Constant torque throughout its fully
range of motion.• RH and LH application.
• Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation.
Material:• Hinge and covers:
PA, black• Pin:
stainless steel
Version Nm Part No.Torque Hinge 0‑5 703‑9012
metalika_5
Text Box
La solution charnières et verrouillages
www.pinetuk.com / catalogue 2010
Hinges /
NP
Hinges /
La solution charnières et verrouillages
57
Small friction hinge - adjustable
72-1-4136 200x50
C
B 21A
D
15
10.5(S)
Small size friction hinge to maintain a panel in position. The friction torque is adjustable with a hex key. A full product data sheet is available on our website.
A B C D S part number material finish weight
30 35 3 8 3.5 72-1-4136 alu 6060 T5 raw 10g
30 35 3 8 3.5 72-1-4137 alu 6060 T5 black anodised 10g
Large size friction hinge to maintain a panel in position. The friction torque is adjustable with a hex key. Available with a choice of studs or holes. A full product data sheet is available on our website.
A B C D note part number material finish weight
65 55 4.5 13 fixing with M6 screw 72-1-4145 alu 6060 T5 clear anodised 66g
65 55 4.5 13 fixing with M6 screw 72-1-4146 alu 6060 T5 black anodised 66g
65 55 4.5 13 fixing with M6 studs 72-1-4147 alu 6060 T5 clear anodised 78g
65 55 4.5 13 fixing with M6 studs 72-1-4148 alu 6060 T5 black anodised 78g
Hinges with dual function
La solution charnières et verrouillages
Hinges /
58La solution charnières et verrouillages
www.pinetuk.com / catalogue 2010
Hinges /
58
Hinges /
La solution charnières et verrouillages
www.pinetuk.com / catalogue 201059
Hi-Klik™ detent hinge
72-1-4197 200x60
2
C
B 38
A
D
48
9.5
Ø 6.3
Ø 10.2
Indented every 30°. 3 torque values. Torque is preset. A full product data sheet is available on our website.
A B C D torque part number material finish weight
67 55 4.5 13 1.8 N.m 72-1-4197 alu 6060 T5 black anodised 106g
67 55 4.5 13 2.5 N.m 72-1-4198 alu 6060 T5 black anodised 106g
67 55 4.5 13 3.2 N.m 72-1-4225 alu 6060 T5 black anodised 106g
Detent plastic hinge
54-7-3510 200x50
A
9
2.8
8
40
30
B
Ø 4.2 - 9.8
x 4
Holds door leaves in 4 different positions (90° each). Maximum door weight : 1.2kg/pair. 303 stainless steel pin. A full product data sheet is available on our website.
Die-cast steel hinge with removable brass pin Stop at 90° The same hinge is available without stop (part number 72-1-3502)
A C D part number material finish weight
60 5 6 72-1-0204 304 stainless steel harshed 350g
Hinges with dual function
CARACTÉRISTIQUES
Couple de manœuvre à température ambiante Couple de Tenue Résistance Résistance
Application Application dynamiqueserrage maxi de en température à la traction au cisaillement
statique la vis de réglage maxi. maxi.
0 à 100 Ncm De 0 à 1000 cycles = 60% du couple de départ 70 Ncm – 20 °C à + 80 °C 2240 N 1050 NDe 1000 à 10000 cycles = 36% du couple de départ Clé Allen 2,5De 10000 à 30000 cycles = stabilisation à 20 Ncm
6. CHARNIÈRES À FRICTIONTORQUE HINGES
DREHMOMENT SCHARNIERE
CONCEPTIONET FABRICATION
DE PIÈCES SPÉCIALESSUR DEMANDE
numéronumberNummer
matièrematerialWerkstoff
décorfinishDekor
poidsweight
Gewicht
CHARNIÈRES À FRICTIONTORQUE HINGES
DREHMOMENT SCHARNIERE
A x B x C x D x I30 x 35 x 3 x 8 x 3 alu ASG brut 10g
alu ASG anodisé 10 gnoir
alu ASG anodisé 10 gincolore
72-1-4136
72-1-4137
72-1-4160
* Percée et fraisurée pour vis ø I* Drilled and counter sunk for screws ø I* Gebohrt und versenkt für Schrauben ø I
ø (I)* A
B
15
ø D
C
I0,5 I0,5
CHARACTERISTICS
Working torque in room temperature Max. tightening Temperature Maxi tensile Maxi shear
Static use Dynamic usetorque of resistance strength resistance
tightening screw
0 to 100 Ncm From 0 to 1000 cycles = 60% of initial torque 70 Ncm – 20 °C to + 80 °C 2240 N 1050 NFrom 1000 to 10000 cycles = 36% of initial torque Allen key 2,5From 10000 to 30000 cycles = stabilization at 20 Ncm
EIGENSCHAFTEN
Drehmoment bei Raumtemperatur Maximales Drehmoment Temperatur- Zugfestigkeit Abschnelden-
0 à 100 Ncm Von 0 bis 1000 Zyclus = verbliebenes Drehmoment 60 % 70 Ncm – 20 °C à + 80 °C 2240 N 1050 NVon 1000 bis 10000 Zyclus = 36% du couple de départ Allen Schlüssel 2,5Von 10000 bis 30000 Zyclus = stabilisation à 20 Ncm
MÉCANISME À FRICTIONTORQUE MECHANISM
78
numéronumberNummer
matièrematerialWerkstoff
décorfinishDekor
poidsweight
Gewicht
CHARNIÈRES À FRICTIONTORQUE HINGES
DREHMOMENT SCHARNIERE
A x B x C x D65 x 55 x 4,5 x 13 alu ASG anodisé 66 g
incolore
alu ASG anodisé 66 gnoir
72-1-4145
72-1-4146
A x B x C x D65 x 55 x 4,5 x 13 alu ASG anodisé 78 g
incolore
alu ASG anodisé 78 gnoir
72-1-4147
72-1-4148
Fixation par vis CHC M6 Fixture with screws socket head M6Befestigung mit Innensechskantschraube M6
Fixation par goujons M6 Fixture with skids M6 Befestigung mit Stift M6
38
B
A
C
2,5
ø D
48
15
9,5
4 x M6
Caractéristiques sur demandeCharacteristics on request Technische Daten auf Wunsch
Encliquetage tous les 30°Positioning each 30°Raststellungen bei jeweils 30°
nouveaunewneu
Torque hinge adjustable
This torque hinge range is meant for articulating and holding a panel or door with no additional hardware thus simplifying design and saving installation time. Main features: ▪ Reduced dimensions ▪ Adjustable holding torque with the aid of a setting screw ▪ Good corrosion resistance ▪ Suitable for flush/nested door ▪ Suitable for RH and LH doors ▪ Exists in 2 dimensions (65 and 30) ▪ Fixing by screws or studs ▪ Custom made hinges, please ask us Application examples: ▪ door panels ▪ industrial display ▪ seat headrest ▪ vehicles interior trimming Etc. Material: aluminium, anodised (clear or black) or raw aluminium cartridge: POM (polyacetal resin) setting screw: stainless steel washers: PA (polyamide), white or black studs: steel, zinc plated, white or black Part numbers: 72-1-4145 and 72-1-4146 version 65 72-1-4147 and 72-1-4148 version 65 72-1-4160 and 72-1-4137 version 30 72-1-4136 version 30 Other hinges with additional fea-tures: see our catalogue.
Friction hinge 72-1-4146 and 72-1-4145
Friction hinge 72-1-4147 and 72-1-4148
Friction hinge 72-1-4137 and 72-1-4160
Torque hinge adjustable
Pinet Industrie ● 9, rue de l’Etang ● Parc international d’activités Paris Nord 2 BP 62036 ● 95971 Roissy Charles de Gaulle Cedex ● France Tél. : 33 (0)1 49 38 27 00 ● Fax : 33 (0)1 48 63 77 70 ● www.pinet.tm.fr SAS au capital de 4 118 400 € ● RCS Bobigny et SIRET ● B 407 485 556 00010 ● Code NAF : 286 F
Subject to technical changes
Friction hinge version 65 (dimensions) Friction hinge version 30 (dimensions)
15
35
30
3.35.3
21
Ø 10
for c'sk screw M3Ø 3.5
total swingof 180°
Part numbers Fixing Finish
72-1-4145 With holes Clear anodised
72-1-4146 With holes Black anodised
72-1-4147 With studs Clear anodised
72-1-4148 With studs Black anodised
Part numbers Fixing Finish
72-1-4160 With holes Clear anodised 72-1-4137 With holes Black anodised 72-1-4136 With holes Raw
Other information: Holding torque: 0 to 500 Ncm maximum * Setting screw torque: 200 Ncm maximum Setting key: hex 4 (not supplied) Tensile strength: 6,000 N Shear strength: 5,000 N Recommended temperature range: -20°C +80°C Fixing screws: according to DIN 912 * static range at room temperature
Other information: Holding torque: please ask us Setting screw torque: please ask us Setting key: hex 2.5 (not supplied) Tensile strength: 2,240 N Shear strength: 1,050 N Recommended temperature range: please ask us Fixing screws: according to DIN 7991 * static range at room temperature