3.1 Liv Ansi Din Std Ci Di Valve Full Range Cat.s

Lanus Industries LLC USA

CopyRight@2007Lanus Industries LLC USA.All right reserved. 1

ANSI|DIN|JIS|BS STD CAST IRON DUCTILE IRON

VALVE

I



No Descriptions Page Reference1 AVS VALVE Catalogue Covering Page 1 2 AVS ANSI STD DIN STD Cast Iron & Ductile Iron Valve Products 2 ANSI STD VALVE CATALOGUE

3 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON OS&Y RISING STEM GATE VALVE.FLANGE END.

3,4,5

4 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON NON-RISING STEM.BOLTED N BONNET.GATE VALVE.FLANGE END.

6,7,8

5 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON NON-RISING STEM SPIGOT END GATE VALVE

9,10,11

6 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON BOLTED & BONNET GLOBE VALVE.FLANGE END.

12,13,14

7 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON BOLTED & COVER SWING CHECK VALVE.FLANGE END. 15,16,17

8 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON TWIN DISC WAFER CHECK VALVE.

18,19

9 Cl 125LBS CAST IRON & DUCTILE IRON Y-STRAINER.FEMALE BSPT & NPT

20,21

10 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON Y-STRAINER.FLANGE ENDS

22,23

11 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON BALL VALVE.FLANGE ENDS

24,25,26

12 ANSI STD CL 125LBS CAST IRON & DUCTILE IRON KNIEF GATE VALVE.DOUBLE FLANGE ENDS.

27,28,29

DIN STD VALVE CATALGOUE 13 DIN STD PN16 CAST IRON DUCTILE IRON BOLTED & BONNET.NON-RISING STEM GATE

VALVE.FLANGE ENDS. 30,31

14 DIN STD PN16 CAST IRON DUCTILE IRON RISING STEM.GATE VALVE.FLANGE ENDS

32,33

15 DIN STD PN16 CAST IRON BOLTED N BONNET.GLOBE VALVE.FLANGE ENDS.

34,35,36

16 DIN STD PN16 CAST IRON BOLTED N BONNET.ANGLE GLOBE VALVE.FLANGE ENDS

37,38,39

17 DIN STD PN16 CAST IRON & DUCTILE IRON TWIN DISC CHECK VALVE.FLANGE END.

40,41

18 DIN STD PN10/16 CAST IRON & DUCTILE IRON BOLTED & COVER PISTON LIFT CHECK VALVE.FLANGE ENDS. 42,43,44

19 DIN STD PN10/16 CAST IRON & DUCTILE IRON BOLTED & COVER SWING CHECK VALVE.FLANGE ENDS.

45,46,47

20 DIN STD PN10/16 CAST IRON & DUCTILE IRON WAFER LUG TYE BUTTERFLY VALVE

48,49,50


51,52,53


54,55,56

23 DIN STD PN10 ANSI CL 125/150LBS JIS10K BS 10 TABLE D & E CAST IRON & DUCTILE IRON WAFER LUG TYE BUTTERFLY VALVE

57,58,59


60,61,62


63,64,65

26 Valve’s Standard 66-84

27 Catalogue back cover page 85

































































































































Valve Standards 08-000-010

ANSI Valve Standards An overview of American National Standards Institute - ANSI - valve standards .

API Valve Standards An overview of the American Petroleum Institute - API - valves standards.

ASME Valve Standards An overview of The American Society of Mechanical Engineers - ASME - valve standards.

BS - British Standard Valves An overview of British - BS - valve standards.

Chinese and International Valve Standards Chinese valve standards compared with the international ISO, ASTM , ASME, ANSI, MSS, API and JIS standards.

Chinese Valve Standards Chinese standards for steel, cast iron and metal valves.

ANSI Valve Standards

An overview of American National Standards Institute - ANSI - valve standards

ANSI Standard Code Name ANSI Standard Name

ANSI A126 Grey iron castings for valves flanges and pipe fittings

ANSI A181 Standard specifications for forged or rolled steel pipe flanged forged fittings and valves and parts for general service

ANSI B16.10 Face - to - face and end - to - end dimension of ferrous valves

ANSI B16.34 Steel valves

ANSI B127.1 Constant - level oil valvess

API Valve Standards

An overview of the American Petroleum Institute - API - valves standards

API Standard Code Name API Standard Name

API SPEC6D Supplement 1 to api spec 6D (sixteenth edition ) specification for pipeline valves

API STD6D Steel gate plug ball and check valves for pipeline service

API STD6D API Specification for flanged steel gate and plug valves for drilling and production service

API SPE14D API Specification for wellhead surface safety valves for offshore service

API 526 Flanged steel safety relief valves

API 527 Commercial seat tightness of safety relief valves with metal - to metal seats

API 528 API standard for safety relief valve nameplate nomenclature

API 529 Cast - forged Steel plug valves flanged ends

API 594 Wafer - type check valves

API 595 Cast - iron gate valves flanged ends

API 597 Steel venturi gate valves flanged or butt welding ends

API 598 Valve inspection and test

API 599 Steel plug valves flanged or butt welding ends

API 600 Flanged and butt - welding - end steel gate and plug valves for refinery use



API 602 Compact design carbon steel gate valves for refinery use

API 603 150 - pound light - wall corrosion - resistant gate valves for refinery use

API 604 Ductile iron gate valves flanged ends

API 607 Fire - resistant testing of ball valves with soft contact faces

API 609 Butterfly valves to 150 psig and 150 F

API SPEC 6FA Specification for fire test for valves

API SPEC 6FC Specification for fire test for valves with automatic backseats

API BULL 6RS Bulletin on referenced standards for committee 6, standardization of valves and wellhead equipment

API RP 11V6 Recommended practice for design of continuous flow gas lift installations using injection pressure operated valves first edition

API RP 11V7 Recommended practice for repair , testing, and setting gas lift valves

API RP 520 PT 1 Sizing, selection and installation of pressure relieving devices in refineries part 1- sizing and selection

API RP 574 Inspection of piping, tubing, valves and fittings first edition, replaces guide for inspection of refinery equipment Chapter XI

API RP 576 Inspection of pressure-relieving devices first edition

API STD 608 Metal ball valves-flanged, threaded and welding end

ASME Valve Standards

An overview of The American Society of Mechanical Engineers - ASME - valve standards

ASME Valve Standard ASME Standard Name

ASME A105/105M Standard Specification for Carbon Steel Forgings for piping applications

ASME A181/181M Standard Specification for Carbon Steel Forgings for General purpose piping

ASME A182/182M Standard Specification for forged or rolled alloy-steel pipe flanges, forged fittings and valves and parts for high-temperature service

ASME A727/727M Standard specification for carbon steel forgings for piping components with inherent notch toughness.

ASME A961 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, valves, and Parts for Piping Applications

ASME B462 Standard Specification for Forged or Rolled UNS N08020, UNS N08024, UNS N08026, UNS N08367, and UNS R20033 Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service

ASME B834

Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel- Chromium-Molybdenum (UNS N08367) and Nickel- Chromium Molybdenum Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

ASME D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-ignition Engine Fuel for Intake Valve Deposit Formation

ASME F885 Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2 El-1996 R(1996)

ASME F992 Standard Specification for Valve Label Plates El-1997 R(1997)

ASME F993 Standard Specification for Valve Locking Devices El-1997 R(1997)

ASME F1020 Standard Specification for Line-Blind Valves for marine Applications El-1996 RI'1996)

ASME F1098 Standard Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24 EI-1993 R(1993)

ASME F1271 Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications EI-1995 R (1995)

ASME F1370 Standard Specification for Pressure Reducing valves for Water Systems,



Shipboard

ASME F1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

ASME F1565 Standard Specification for Pressure-Reducing Valves for Steam Service

ASME F1792 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

ASME F1793 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service

ASME F1794 Standard Specification for Hand operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems

ASME F1795 standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

ASME A230 Standard specification for steel wire oil - tempered carbon valve spring quality

ASME A232 Standard specification for chromium - vanadium alloy steel valve spring quality

ASME A350 Standard specification for forged or rolled carbon and alloy steel flanges forged fittings and valves and parts for low - temperature service

ASME A338 Standard specification for ultrasonic examination of heavy steel forgings

ASME A694 Standard specification for forgings carbon and alloy steel for pipe flanges fittings valves and parts for high - pressure transmission service

ASME A404 Standards specification for forged or rolled alloy - steel pipe flanges forged fittings and valves and parts specially heat treated for high temperature service

ASME A522 Forged or rolled 8% and 9% nickel alloy steel flanges fittings valves and parts for low - temperature service

BS - British Standard Valves

An overview of British - BS - valve standards

British Standard Code Name BS British Standard Name

BS 1212 Ball valves (Portsmouth type ) excluding floats

BS 1123 Specification for safety valves, gauges and other safety fittings for air receivers and compressed air installations

BS 1414 Specification for steel edge gate valves ( flanged and butt- welding ends ) for the petroleum, petrochemical and allied industries

BS 1552 Control plug cocks for low - pressure gases

BS 1570 Specification for Flanged and Butt - welding ends steel plug valves for the petroleum industry (excluding well - Head and flow - line valves)

BS 1735 Specification for Flanged cast iron outside - screw - and - yoke edge gate valves class 125, size 1.5 in to 24 in for the petroleum industry

BS 1868 Specification for steel check valves (flanged and butt-welding ends ) for the petroleum, petrochemical and allied industries

BS 1873 Specification for Steel globe and globe stop and check valves (flanged and butt-welding ends ) for the petroleum, petrochemical and allied industries

BS 1952 Specification for copper alloy gate valves for general purposes

BS 1953 Copper alloy check valves for general purposes

BS 1968 Floats for Ball valves ( copper )

BS 2060 Copper alloy screw - down stop valves for general purposes

BS 2080 Specification for Face - to - face, centre - to - face end - to -end and centre - to - end dimensions of flanged and butt-welding ends steel valves for the petroleum, petrochemical and allied industries

BS 2591 PT.1 British standard glossary for valves and valve parts (for fluids ) part 1.screw - down stop ,check and gate valves

BS 2591 PT.2 British standard glossary for valves and valves parts ( for fluids) part,2 safety



valves and relief valves

BS 2591PT.3 British standard glossary for valves and valve parts (for fluids ) part 3, Plug valves and cocks

BS 2591PT.4 British standard glossary for valves and valves (for fluids ) part4, butterfly valves

BS 2591PT.5 British standard glossary for valves and valve parts ( for fluids ) part5, Ball valves

BS 2995 Specification for cast and forged steel wedge gate, glove, check and plug valves screwed and socket - Welding sizes 2 in and smaller for the petroleum industry

BS 3464 Specification for cast iron gate valves for general purposes

BS 3808 Specification for cast and forged steel flanged, screwed and socket - welding Wedge gate valves (compact design ) sizes 2 in and smaller for the petroleum industry

BS 3948 Specification for cast iron parallel slide valves for general purposes

BS 3952 Specification for cast iron butterfly valves for general purposes

BS 3961 Specification for cast iron screw - down stop valves and stop and check valves for general purposes

BS 4090 Cast Iron check valves for general purposes

BS 4133 Flanged steel parallel slide valves for general purposes

BS 4312 Flanged steel screw - down stop valves and stop and check valves for general purposes

BS 4460 Steel Ball valves for the petroleum industry

BS 5146 Specification for inspection and test of steel valves for the petroleum petrochemical and allied industries

BS 5150 Cast iron wedge and double disk gate valves for general purposes

BS 5151 Cast iron gate (parallel slide ) valves for general purposes

BS 5152 Cast iron globe and globe stop and check valves for general purposes

BS 5153 Cast Iron check valves for general purposes

BS 5154 Copper alloy globe stop and check, check and gate valves for general purposes

BS 5155 Cast iron and carbon steel butterfly valves for general purposes

BS 5156 Screw down diaphragm valves for general purposes

BS 5157 Steel gate (parallel slide ) valves for general purposes

BS 5159 Specification for cast iron and carbon steel ball valves for general purposes

BS 5160 Specification for Flanged steel globe valves, globe stop and check valves and lift type check valves for general purposes

BS 5351 Steel ball valves for the petroleum petrochemicals and allied industries

BS 5417 Test of genera purpose industrial valves

BS 5418 Marking of general purpose industrial valves Chinese and International Valve Standards

Chinese valve standards compared with the international ISO, ASTM , ASME, ANSI, MSS, API and JIS standards

Chinese Standard Code Num. Chinese Standard Name Adopting Standard

GB12220 General valve -- marking ISO 5209

GB12221 Flanged ends metal valve - face-to-face dimensions ISO 5752

GB12222 Multi-turn valve -- connection of driving device ISO 5210/1 - 3

GB12223 Part-turn valve -- connection of driving device ISO 5211/1 - 3

GB12224 Steel valve - general requirements ANSI B16.34



GB12225 General valve -- copper alloy casting ware technology requirements ASTM B584

GB12226 General valve -- gray casting iron technology requirements ISO 185,BS 1452

GB12228 General valve -- carbon forging steel technology requirements ASTM A 105,A181

GB12229 General valve -- carbon casting steel technology requirements ASTM A703

GB12230 General valve --- Ao casting steel technology requirements ASTM A351

GB12232 General valve -- flanged ends iron gate valve ISO5996-1982, API 595

GB12233 General valve -- iron gate valve and lift check valve BS5152,5153

GB12234 General valve -- flanged and butt-welding ends copper gate valve API 600

GB12237 General valve -- flanged and butt-welding ends steel ball valve ISO7121, API 607

GB12238 General valve -- flanged and wafer ends butterfly valve BS5155

GB12239 General valve -- diaphragm valve BS5156,NFE29

GB12240 General valve -- iron plug valve API 593

GB12241 Safety valve -- general requirements ISO 4126

GB12242 Safety valve -- characteristic testing solution ANSI/ASME PTC25.3

GB12243 Direct spring loaded safety valve JIS B 8210

GB12244 Pressure reducing valve - general requirements JIS B 8372,B8410

GB12245 Pressure reducing valve - characteristic testing solution JIS B 8372,B8410

GB12246 Pilot operated pressure reducing valve JIS B 8372, DSS405

GB12247 Steam trap valve -- classification ISO 6704

GB12248 Steam trap valve -- technology terms ISO 6552

GB12249 Steam trap valve -- marking ISO 6553

GB12250 Steam trap valve -- face-to-face dimensions ISO 6554

GB12251 Steam trap valve -- testing solution ISO 6948,7841,7842

GB/T13927 General valve -- pressure testing ISO 5208

JB/T6899-93 Valve fire-proof test ISO10497

JB/T7927-95 Valve casting steel ware out-form quality requirements MSS SP55



ZBJ16006-90 Inspection and testing of valve API 598

Chinese Valve Standards

Chinese standards for steel, cast iron and metal valves

Chinese Standard Code Num. Chinese Standard Name

GB12220 General valve - marking

GB12221 Flanged ends metal valve - face-to-face dimensions

GB12222 Multi-turn valve - connection of driving device

GB12223 Part-turn valve - connection of driving device

GB12224 Steel valve - general requirements

GB12225 General valve - copper alloy casting ware technology requirements

GB12226 General valve - gray casting iron technology requirements

GB12227 General valve - ductile casting iron technology requirements

GB12228 General valve - carbon forging steel technology requirements

GB12229 General valve - carbon casting steel technology requirements

GB12230 General valve - a casting steel technology requirements

GB12232 General valve - flanged ends iron gate valve

GB12233 General valve - iron gate valve and lift check valve

GB12234 General valve - flanged and butt-welding ends copper gate valve

GB12235 General valve - flanged steel stop and lift check valve

GB12236 General valve - steel swing check valve

GB12237 General valve - flanged and butt-welding ends steel ball valve

GB12238 General valve - flanged and wafer ends butterfly valve

GB12239 General valve - diaphragm valve

GB12240 General valve - iron plug valve

GB12241 Safety valve - general requirements

GB12242 Safety valve - characteristic testing solution

GB12243 Direct spring loaded safety valve

GB12244 Pressure reducing valve - general requirements

GB12245 Pressure reducing valve - characteristic testing solution

GB12246 Pilot operated pressure reducing valve

GB12247 Steam trap valve - classification

GB12248 Steam trap valve - technology terms

GB12249 Steam trap valve - marking

GB12250 Steam trap valve - face-to-face dimensions

GB12251 Steam trap valve - testing solution

GB/T13927 General valve - pressure testing

GB/T13932 General valve - iron swing check valve



GB/T15185 Iron and copper ball valve

GB/T15188.1 Valve face-to-face dimensions - butt-welding ends valve

GB/T15188.2 Valve face-to-face dimensions - wafer ends valve

GB/T15188.3 Valve face-to-face dimensions - female screw-down valve

GB/T15188.4 Valve face-to-face dimensions - male screw -down valve

JB93 Handle

JB94 Spanner

JB106 Valve - marking and identifying paint

JB308 Valve - type establishing way

JB/T450 PN16.032.0Mpa forging angle type high-pressure valve, fastener and technology requirements

JB451 Lever type safety valve technology requirements

JB1308 Pg(2500kgf/cm2)valve type and base specification

JB1309 Pg(2500kgf/cm2)valve pipe and fastener technology requirements

JB/T1691 Valve key construction element dimension of stem head

JB1692 Umbrella type hand wheel

JB1693 Plane hand wheel

JB1694 Valve stem nut (1)





JB1700.1 Locking nut (1)

JB1700.2 Locking nut (2)


JB1702.1 Bearing gland (1)

JB1702.2 Bearing gland (2)

JB1703 Sleeve liner

JB1706 Pressing sleeve nut

JB1708 Gland

JB1709 T type bolt

JB1712 Asbestos packing

JB1713 Packing seat(1)

JB1716 Packing seat(2)

JB/T1717 Valve construction key element back seat ring dimensions

JB1718 Spacer (1)

JB1719 Spacer (2)

JB1720 Spacer (3)

JB1721 Spacer (4)

JB1726 Valve disc seat

JB1727 Folio circle

JB1728 Stop collar

JB/T1732 Valve construction key element taper sealing face



dimensions

JB/T1733 Valve construction key element valve body copper sealing face dimensions

JB/T1734 Valve construction key element wedge disc and valve disc copper sealing face dimensions

JB1735 Foot valve disc sealing ring

JB1736 Swing check valve disc sealing ring

JB1737 Swing check valve disc sealing ring pressing board

JB/T1738 Valve construction key element dimensions of wedge gate valve body slide way and slide way groove

JB/T1739 Valve construction key element dimensions of wedge gate valve body sealing plane clearance and wedge angle

JB/T1740 Valve construction key element dimensions of wedge disc sealing plane

JB1741 Thimble

JB1742 Adjusting ring

JB1747 Packing ring

JB1749 Ammonia valve disc

JB/T1750 Valve construction key element ammonia valve body sealing plane dimensions

JB/T1751-92 Valve construction key element socket welding and fitting pipe head dimension

JB/T1752-92 Valve construction key element male screw ends head dimensions

JB1753-91 Joint ring

JB1754-91 Joint

JB1755-91 Joint nut

JB/T1756-92 Valve construction key element dimensions of bayonet joint ends

JB1757-91 Bayonet

JB1758-91 Bayonet nut

JB1759-91 Bearing ring

JB1760- 91 Six-angle bolt

JB1761-91 Bolt ring

JB/T1762-92 Valve construction key element spanner dimensions

JB2202-77 Direct spring loaded safety valve specification

JB2203-77 Direct spring loaded safety valve face-to-face dimensions

JB2205-77 Reducing valve face-to-face dimensions

JB2206-77 Reducing valve technology requirements

JB2311-78 Ball valve technology requirements

JB2765-81 Valve technology terms

JB2766-92 PN16.0- 32.0Mpa dimensions of forging high-pressure valve

JB/T2768-92 PN16.0- 32.0Mpa Pipe, piping fitting, valve head dimensions

JB/T2769-92 PN16.0- 32.0Mpa screw flange

JB/T2770-92 PN16.0- 32.0Mpa joint nut

JB/T2771-92 PN16.0- 32.0Mpa joint



JB/T2772-92 PN16.0- 32.0Mpa Blind plate

JB/T2773-92 PN16.0- 32.0Mpa double head bolt

JB/T2774-92 PN16.0- 32.0Mpa double bolt ends and thread hole dimensions

JB/T2775-92 PN16.0- 32.0Mpa nut

JB/T2776-92 PN16.0- 32.0Mpa lens ring

JB/T2777-92 PN16.0- 32.0Mpa Non-hole lens ring

JB/T2778-92 PN16.0- 32.0Mpa temperature marking of pipe and fastener

JB3328-83 Air jar valve and pipe-line valve

JB3339-83 Little type medical air jar frame type valve connection dimensions

JB5206.1-91 Packing gland (1)



JB5207-91 Packing pressing plate

JB5208-91 Separating circle

JB5209-91 Plastics packing

JB5210-91 Back sealing ring

JB5211-91 Gate valve seat ring

JB/T5296-91 General valve testing way of flow rate coefficient and flow resistant coefficient

JB/T5298-91 Steel plate gate valve for pipe line using

JB/T5299-91 General valve Hydraulic actuator butterfly type check valve

JB/T5300-91 General valve material

JB/T6438-92 Valve sealing face plasma arc welding - technology requirements

JB/T6439-92 Valve pressing casting steel ware - magnetism powder flaw detector inspection

JB/T6440-92 Valve pressing casting steel ware - rax irradiating inspection

JB/T6441-92 Safety valve for compressor purpose

JB/T6495-92 Valve construction key element Gate valve (or disc) T type groove dimensions

JB/T6496-92 Valve construction key element packing dimensions

JB/T6497-92 Valve construction key element stem head dimensions

JB/T6498-92 Valve construction key element disc and stem connection groove dimensions

JB/T6899-93 Valve fire-proof test

JB/T6900-93 Draught valve

JB/T6901-93 Seal type glasses valve

JB/T6902-93 Valve casting steel ware hydraulic penetrating inspection way

JB/T6903-93 Valve forging steel ware super wave inspection way

JB/T6904-93 Inspection and testing of air jar valve

JB/T7248-94 Technology terms of low temperature casting steel for valve purpose

JB/T7744-95 Valve sealing face alloy powder for plasma arc welding



JB/T7745-95 Pipe line ball valve

JB/T7746-95 Diameter-shrinking forging steel valve

JB/T7747-95 Needle type stop valve

JB/T7748-95 Valve clearance degree and inspection way

JB/T7749-95 Technology terms of sub-zero valve

JB/T7927-95 Valve casting steel ware out-form quality requirements

JB/T7928-95 General valve offer requirements

JB/Z243-85 Gate valve static pressure length of life test rules

JB/Z244-85 Stop valve static pressure length of life test rules

JB/Z245-85 Plug valve static pressure length of life test rules

JB/Z246-85 Ball valve static pressure length of life test rules

JB/Z247-85 Valve - electrically device length of life test rules

JB/Z248-85 Butterfly valve static pressure length of life test rules

ZBJ16002-87 Valve electrically driving apparatus technology terms

ZBJ16004-88 Reducing valve type and basing coefficient

ZBJ16006-90 Inspection and testing of valve

ZBJ16007-90 Steam trap valve technology terms

ZBJ16008-90 Hydraulic petroleum gas device urgent shut down valve - technology terms

ZBJ16009-90 Valve pneumatic actuator technology terms

JB/T8473-96 Instrument valve series

JB/T8528-97 General valve electric actuator - technology terms

JB/T8527-97 Metal sealing butterfly valve

JB/T8529-97 Explosion-proof type valve electric actuator - technology terms

JB/T8530-97 Valve electric actuator - type establishing way

JB/T8531-97 Valve manual actuator - technology terms

JB/T8670-97 YBDF2 series explosion-proof three-phase asynchronous generator for valve electric actuator purpose - technology terms

Standard Name 3200 Valves and gate valves summary

3202 T1 Dimensions of flanged valves 3202 T2 Dimensions of welding ends valves 3202 T3 Dimensions of wafer-type valves 3202 T4 Dimensions of female screw-down valves 3202 T5 Dimensions of union joint valves

3203 Large valves and gate valves 3210 Dimensions and stepper of valves electrical apparatus 3211 Pipe valves definition

3230 B1 Valves technology providing requirments and consulting order and offer 3230 B2 General requirements for valves technology providing 3230 B3 Valves technology providing requirments and tests collection

3230 B4 Valves technology providing requirments, special requirements and tests of valves for water drinking apparatus

3230 B5 Valves technology providing requirments, special requirements and tests of valves for air device and air pipe



3230 B6 Valves technology providing requirments, combustible liquid requirements and inspection 3233 Valves stem head and handwheel hub 3234 Valves stem diameter 3320 Safety valves definition 3332 Pg25~320Kgf/cm2 forging steel stop valves 3352 Metal sealing of casting steel inside screw nonrising stem gate valve

3352 B1 Metal sealing of casting steel outside screw stem gate valve 3352 B2 Soft sealing of casting steel inside screw nonrising stem gate valve 3352 T1 Gate valves general specification 3352 T2 Screw - down copper alloy gate valves 3352 T3 Metal sealing of casting steel outside screw stem gate valve 3352 T4 Soft sealing of casting steel inside screw nonrising stem gate valve 3352 T9 Heat resistant steel gate valves

3352 T10 Stainless steel gate valves 3352 T11 Flanged copper alloy gate valves 3356 T1 Valves general questions 3356 T2 Valves - casting iron gate valves 3356 T3 Valves - Non-alloy steel gate valves 3356 T4 Valves - Heat resistant steel gate valves 3356 T5 Valves - Stainless steel gate valves 3388 T1 Thermal control exhaust air valves for gas stove using

3388 T2 Mechnical control air or liquid exhaust air valves for gas stove using, safety technology requirements and tests

3441 T1 Hard polyvinyl chloride valves requirements and tests 3441 T3 Hard zellon valves diaphragm dimensions 3441 T4 Hard polytetrafluoroethylene valves seat ring dimensions

3465 Pg10Kfg/cm2 flanged plug valves 3470 Pg10Kfg/cm2 packing plug valves 3471 Pg10Kfg/cm3 flanged and screw-down ends three way plug valves 3472 Pg10Kfg/cm4 three way packing plug valves 3486 Compressed air valves component, coupling one-way plug valves 3487 Compressed air valves component, coupling double-way plug valves 3502 Pg10kgf/cm2 double sides telescoped joint slanting valves ring small water providing valves 3503 Pg10kgf/cm2 double sides telescoped joint small draw off valves 3504 Pg10kgf/cm2 slanting ring water providing valves

3507 Pg10kgf/cm2 one side telescoped joint and the other side screw joint water providing through way valves with plane sealing for pump using

3508 Pg10kgf/cm2 welding telescoped and plane sealing pipe ends through way water providing valves for pump using

3509 Pg10kgf/cm2 soft pipe plane sealing small type water draughting valves 3512 Pg10kgf/cm2 double sides telescoped joint through way small type water providing valves 3513 Pg10kgf/cm2 double sides telescoped joint through way small type water draughting valves 3517 Pg10kgf/cm2 small water draughting valves 3520 Pg10kgf/cm2 water draughting valves 3530 Threaded inside screw nonrising stem gate vavle for air using

3555 B1 Soft pipe ends through way plug valves for drink industry purpose 3555 B2 Steady pipe installment through way plug valves for drink purpose

3681 Working Reference definition for trap valves 3682 Trap valves pressure level , connection type , nominal diameter and valve body material 3683 Trap valves charactiristic data 3684 Trap connection dimension,connection type, entrance pipe ends and exit screw ends

3790 Pg10kgf/cm2 Dg10~32mm, Pg10kgf/cm2 Dg40~200mm casting stainless steel slant ring stop valves with yoke

3791 Pg10~32kgf/cm2 Dg10~32mm, Pg10kgf/cm2 Dg40~200mm casting stainless steel angle type, ninty angle type stop valves with yoke

3843 Connection dimensions of Pg10kgf/cm2 non ferrous screw ends inside screw nonrising stem gate valves

7112 Major dimension of acid silicic resistant casting iron packing plug valves 7113 Major dimension of acid silicic resistant casting iron packing plug valves with relief hole 7116 Major dimension of acid silicic resistant casting iron three way packing plug valves 7120 Major dimension of acid silicic resistant casting iron slant ring stop valves

8924 Refrigerating technology , refrigerating machinery angle valves double bolt flange and bolt flange nominal pressure 25Kgf/cm2

20005 Stop valves for air compress pipe using and gate valves with Tuo yuan valve body 20042 Major dimension and manufactuting rules of Pg25Kgf/cm2 water valves

25418 T1 Atomic energy divice , valves , material and manufacturing test 25418 T2 Files of atomic energy divice , valves , material and manufacturing test



86251 Casting iron flanged stop valves 86252 Pg10 and 16Kgf/cm2 Dg20~300mm casting iron flanged stop check valves 86253 Pg10 and 16Kgf/cm2 Dg20~300mm casting iron flanged check valves

86255 B1 Connection dimensions of Pg4~6Kgf/cm2 Dg15~300mm gray casting iron stop valves flange according to Pg10~16Kgf/cm2 connection dimensions and assembly drawing

86255 B2 Connection dimensions of Pg4~16Kgf/cm2 Dg15~300mm gray casting iron stop valves flange according to Pg10~16Kgf/cm2 connection dimensions and assembly drawing

86256B1 Connection dimensions of Pg4~16Kgf/cm2 Dg15~300mm gray casting iron angle type stop valves flange according to Pg10~16Kgf/cm2 connection dimensions and assembly drawing

86256 B2 Connection dimensions of Pg4~16Kgf/cm2 Dg15~300mm stop valves flange according to Pg10~16Kgf/cm2 part form

86260 Pg10 and 16Kgf/cm2 Dg20~300mm cooper flanged ends stop valves 86261 Pg10 and 16kgf/cm2 Dg20~300 copper flanged ends stop check valves 86262 Pg10 and 16kgf/cm2 Dg20~300 copper flanged ends non-stop check valves

86300 B1 Chapter 1 Dg15~300mm stop valves disc, assembly vlaves and connection dimensions 86300B2 Chapter 2 Dg15~300mm stop vlaves desc part form 86310 B1 Chapter 1 Dg15~300mm stop valves major dimension and connection dimension of valves body 86310 B2 Chapter 2 Dg15~300mm valves body marking and cross section of stop valves

86311 B1 Chapter 1 Dg15~300mm angle type stop valves major dimensions and connection dimensions of valve body

86311 B2 Chapter 2 Dg15~300 valve body marking and cross section of angle type stop valves 86320 Dg15~300mm stop valves bonnet 86500 Summary of marine threaded gate valves 86501 Pg40 Dg6~25 T225oC non-welding copper stop valves with cutting ring 86502 Pg40 Dg6~25 T225oC non-welding copper stop check valves with cutting ring 86504 Through way copper stop check valves valve body with non-welding pipe and cutting ring 86505 Angle type copper stop check valves valve body with non-welding pipe and cutting ring 86511 Pg40 Dg6~25 T225oC slanting packing box and pipe joint copper stop valves 86512 Pg40 Dg6~25 T225oC slanting packing box and pipe joint copper check valves 86514 Copper through way globe check valve body with 25otaper pipeline screw ends 86515 Copper angle globe check valve body with 25otaper pipeline screw ends 86522 Stem of copper stop valves 86523 Stem of copper stop valves, disc and keeper ring 86525 Dg6~32mm non-ferrous stop check valve , valve piece top of disc and stem

86552 Dg6~25mm Pg100kgf/cm2 T300oC steel stop valves with cutting ring and non-welding pipe screw ends

86650 B1 Chapter 1 Dg15~300mm stop valves forging disc 86650 B2 Chapter 2 Dg50~300mm Stop valves casting disc 86650 B3 Chapter 3

86660 Stop valves stem with yoke 86675 Packing yoke 86680 Packing ring 86681 Pressing ring

86702 B1 Casting iron gate valves without graduation wedge ellipse gate valve Dg40~500, Pg2.5 and 4kgf/cm2 Connection dimension with flange according to Pg10kgf/cm2 installment drawing and connection dimension

86702 B2 Casting iron gate valves Dg40~500, Pg2.5 and 4kgf/cm2 without graduation wedge ellipse gate valve flange connection dimension according to Pg10kgf/cm2 form

86703 B1 Casting iron gate valves Dg40~500, Pg2.5 and 4kgf/cm2 wedge ellipse gate valve with graduation Connection dimension according to Pg10kgf/cm2 general assembly drawing and connection dimension

86703 B2 Casting iron gate valves Dg40~500, Pg2.5 and 4kgf/cm2 wedge ellipse gate valve with graduation flanged connection dimension according to Pg10kgf/cm2 form

86704 B1 Wedge ellipse gate valve body of casting iron gate valve with casting iron seat ring 86704 B2 Wedge ellipse gate valve body of casting iron gate valve with seat ring

86705 Casting iron gate valve wedge ellipse gate valve heating conserve bucket 86706 B1 Casting iron gate valve wedge ellipse gate valve gate disc with casting seat ring

86707 Casting iron gate valve wedge ellipse gate valve packing ring yoke 86708 Casting iron gate valve wedge ellipse gate valve packing box 86709 Casting iron gate valve wedge ellipse gate valve spindle 86710 Casting iron gate valve wedge ellipse gate valve spindle nut 86711 Casting iron gate valve wedge ellipse gate valve spindle nut graduation and pin nail 86720 Dg20~100 Pg16 copper wedge gate valve with yoke and flange 87000 Summary of marine threaded plug valve

87001 Dg1/8''~1'' Pg16 non-ferrous water relief plug valve with swing bolt plug general assembly drawing and subsidiary form

87002 According to DIN87001 Non-ferrous water relief plug vlave body



87003 B1 Dg1/2''~1'' Pg6 closed approving non-ferrous water relief plug valve with swing bolt plug general assembly drawing and subsidiary form

87003 B2 Dg1/2''~1'' Pg6 closed approving non-ferrous water relief plug valve with swing bolt plug valve body 87003 B3 Dg1/2''~1'' Pg6 closed approving non-ferrous water relief plug valve with swing bolt plug body

87003 B4 Dg1/2''~1'' Pg6 closed approving non-ferrous water relief plug valve with swing bolt plug, seat ring , double hole nut, wedge disc T type groove

87005 Pg10 Dg4~25 T80o C and Pg16 T40o C copper non-yoke plug with non-welding pipe and cutting ring

87006 87010 87011 87012 According to DIN87001 Non-ferrous water relief plug body for non-yoke plug valve

87015 Pg16 Dg6~25 T80o C and Pg25 T40o C copper plug valve with non-welding pipe, yoke and cutting ring

87016

87020 Pg16 Dg6~25 T80o C and Pg25 T40o C copper yoke plug valve with connecting pipe and 25o slanting packing box

87021 87022

87101 B1 Dg50~150 Pg1 ductile,copper and casting steel autoclosed check valve disc flange connection dimension according to Dg10 general assemboy drawing and connection dimension

87101 B2 Dg50~150 Pg1 ductile,copper and casting steel autoclosed check valve disc flange connection dimension according to Dg10 subsidiary form

87102 Check valve body 87103 Check valve bonnet

87104 B1 Check valve whole set general assembly drawing and subsidiary form 87104 B2 Check vlave fitting drawing

87105 Check valve bolt plug joint with HUI standard screw

87106 B1 Check valve locking apparatus general assembly drawing connection dimensions and subsidiary form

87106 B2 Check valve locking apparatus valve spindle packing box 87901 B2 Dg6~20 Pg25 Commercial marine pump using air valve subsidiary form

BSi - British Standard institute valve standards:

• BS 341-1:1991 Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003) , BS 341-3:2002) , BS EN 849:1997) , BS EN ISO 13340:2001) , BS EN ISO 14246:2001) , BS 341-4:2004)

• BS 341-2:1963 Transportable Gas Container Valves. Valves with Taper Stems for Use with Breathing Apparatus. (REPLACED by BS 341-1:1991) , BS EN 849:1997) , BS EN ISO 12209-1:2001) , BS EN ISO 12209-2:2001) , BS EN ISO 12209-3:2001)

• BS 341-3:2002 Transportable gas container valves. Valve outlet connections

• BS 341-4:2004 Transportable gas container valves. Pressure relief devices

• BS 759-1:1984 Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers. Specification for valves, mountings and fittings

• BS 1123-1:1990 Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation

• BS 1212-1:1990 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)

• BS 1212-1:1990 Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)

• BS 1212-3:1990 Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)

• BS 1212-4:1990 Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)



• BS 1552:2004 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar

• BS 1570:1960 Flanged and but weld-welding end steel plug valves for the petroleum industry (excluding well -head and flow-line valves)

• BS1655:1976 Flanged automatic control valves for the process control industry (face to face dimensions)

• BS 1735:1966 Flanged cast iron outside-screw-and-yoke wedge gate valve, class 125, sizes 1 1/3 in to 24 in, for the petroleum industry

• BS 1868:1975 Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries

• BS 1873:1975 Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries

• BS1952:2000 Copper alloy valves for general purposes

• BS1953:2000 Copper alloy check valves for general purposes

• BS1963:1990 Specification for pressure operated relay valves for domestic, commercial and catering gas appliances

• BS 1968:1953 Specification for floats for ball valves (copper)

• BS2060:2000 Copper alloy screw down stop valves for general purposes

• BS2080:1995 Specification for face to face, center to face, end to end and center to end dimensions of valves

• BS 2456:1990 Specification for floats (plastics) for float operated valves for cold water services

• BS 2879:1980 Specification for draining taps (screw-down pattern)

• BS2995:1966 Cast and forged steel wedge gate, globe, check and plug valve, screwed and socket welding, sizes 2 in and smaller, for the petroleum industry

• BS 3457:1973 Specification for materials for water tap and stop valve seat washers

• BS 3464:2000 Cast iron wedge and double disk gate valves for general purposes

• BS3808:1964 Cast and forged steel flanged, screwed and socket welding wedge gate valves (compact design), sizes 2 in and smaller, for the petroleum industry

• BS3948:1965 Cast iron parallel slide valves for general purposes

• BS3952:1965 Cast iron butterfly valves for general purposes

• BS3961:1965 Cast iron screw down stop valves and stop and check valves for general purposes

• BS 4062-1:1982 Valves for hydraulic fluid power systems - Methods for determining pressure differential/flow characteristics

• BS 4062-2:1990 Valves for hydraulic fluid power systems - Methods for determining performance

• BS4090:1966 Cast iron check valves for general purposes

• BS4133:1967 Flanged steel parallel slide valves for general purposes

• BS4312:1968 Flanged steel screw down stop valves and check valves for general purposes

• BS 4460:1969 Steel ball valves for the petroleum industry

• BS 5041:1987 Fire hydrant systems equipment - Specification for landing valves for wet risers



• BS 5146 P1:1984 Steel valves for the petrochemical and allied industries

• BS 5150:1990 - Withdrawn, Superseded Specification for cast iron gate valves

• BS 5151:1982 - Withdrawn, Superseded Specification for cast iron gate (parallel slide) valves for general purposes

• BS 5152:1989 - Withdrawn, Superseded Cast iron globe & globe stop and check valves

• BS 5153:1989 - Withdrawn, Superseded Cast iron check valves for general purposes

• BS 5154:1991 Specification for copper alloy globe, globe stop and check, check and gate valves

• BS 5155:1992 Specification for butterfly valves

• BS 5156:1990 Specification for diaphragm valves

• BS 5157:1989 Specification for steel gate (parallel slide) valves

• BS 5158:1989 Specification for cast iron plug valves

• BS 5159:1982 Cast iron and carbon steel ball valves for general purposes

• BS 5160:1989 Specification for steel globe valves, globe stop and check valves and lift type check valves

• BS 5163:1991 Specification for predominantly key-operated cast iron gate valves for waterworks purposes

• BS 5351:1990 Steel ball valves for petroleum, petrochemical and allied industries

• BS 5352:1990 Steel wedge gate, globe and check valves 50mm and small

• BS 5353:1989 Specification for steel plug valves

• BS 5417:1976 Testing of general purpose industrial valves

• BS 5418:1984 Specification for marking of general purpose industrial valves

• BS 5672:1991 Specification for designation of the direction of retation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on engines for reciprocating internal combustion engines

• BS 5793-4:1987 Industrial-process control valves - Specification for inspection and routine testing

• BS 5793-6:1986 Industrial-process control valves - Specification for mounting details for attachment of positioners to control valve actuators

• BS 5834-1:1985 Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for guards, including foundation units

• BS 5834-2:1983 Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for small surface boxes

• BS 5834-3:1985 Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for large surface boxes

• BS 5834-4:1989 Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for preformed chambers

• BS 5995:1980 Methods of test for electrohydraulic servovalves

• BS 6282-2:1982 Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54



• BS 6282-3:1982 Devices with moving parts for the prevention of contamination of water by backflow - Specification for in-line anti-vacuum valves of nominal size up to and including DN 42

• BS 6282-4:1982 Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42

• BS 6283-2:1991 Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar

• BS 6283-4:1991 Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar

• BS 6494-4:1989 Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves

• BS 6675:1986 Specification for servicing valves (copper alloy) for water services

• BS 6683:1985 Guide to installation and use of valves

• BS 6697:1986 Methods of test for electrohydraulic proportional control valves

• BS 6755-2:1987 Testing of valves - Specification for fire type-testing requirements

• BS 6759-1:1995 Safety valves - Part 1. Specification for safety valves for steam and hot water

• BS 6759-2:1997 Safety valves - Part 2. Safety valves for compressed air or inert gas

• BS 6759-3:1995 Safety valves - Part 3. Specification for safety valves for process fluids

• BS 6821:1988 Methods for aerodynamic testing of dampers and valves

• BS 7296-1:1990 Cavities for hydraulic fluid power cartridge valves - specification for two-port slip-in valves

• BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems

• BS 7389-1:1990 Pneumatic fluid power valve mounting surfaces - specification for five-port directional control valves (without electrical motor)

• BS 7438:1991 Specification steel and copper alloy waffer check valves, single disk, spring-loaded type

• BS EN 488:2003 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene

• BS EN 558-1:1996 Industrial values face to face and center to face dimensions of metal valves for use in flanged pipe systems. Part 1 PN designated valves

• BS EN 558-2:1996 Industrial valves face to face and center to face dimensions of metal valves for use in flanged piping systems. Part 2 class-designated valves

• BS EN 561:2002 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes

• BS EN 736-1:1995 Valves - Terminology - Definition of types of valves

• BS EN 736-2:1997 Valves - Terminology - Definition of components of valves

• BS EN 816:1997 Sanitary tapware - Automatic shut-off valves PN 10

• BS EN 917:1997 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness

• BS EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges



• BS EN 1112:1997 Shower outlets for (PN 10) sanitary tapware

• BS EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism

• BS EN 1704:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending

• BS EN 1705:1997 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow

• BS EN 12119:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling

• BS EN 14141:2003 Valves for natural gas transportation in pipelines - Performance requirements and tests

• BS EN 14189:2003 Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders. Partially replaces BS 341-1:1991

• BS EN 28233:1992 Thermoplastics valves - Torque - Test method

• BS EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method

• BS EN 60534-1:1989 Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations

• BS EN 60534-2-1:1999 Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions

• BS EN 60534-2-3:1998 Industrial-process control valves - Flow capacity - Test procedures

• BS EN 60534-2-5:2003 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery

• BS EN 60534-3-1:2000 Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves

• BS EN 60534-3-2:2001 Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves

• BS EN 60534-3-3:1998 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves

• BS EN 60534-5:2004 Industrial-process control valves - Marking

• BS EN 60534-6-1:1998 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators

• BS EN 60534-6-2:2001 Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators

• BS EN 60534-8-1:2001 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves

• BS EN 60534-8-2:1991 Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves

• BS EN 60534-8-3:2000 Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method

• BS EN 60534-8-4:1994 Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow

• BS EN 60730-2-8:2002 Specification for automatic electrical controls for household and similar use - Particular requirements - Particular requirements for electrically operated water valves, including mechanical requirements



• BS EN ISO 5210:1996 Industrial valves - Multi-turn valve actuator attachments

• BS ISO 4401:1996 Hydraulic fluid power - Four-port directional control valves - Mounting surfaces

• BS ISO 6263:1997 Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces



Lanus Industries LLC W.O USA



3.1 Liv Ansi Din Std Ci Di Valve Full Range Cat.s

Documents

pg10 16kgf cm2 connection dimensions

pg6 closed approving

valve stem nut

carbon steel forgings

process control valves

hot water systems

copper alloy body

iron gate valve