Description of Project 2233 Park • Replace existing mesh banner (480”x336”) with a new off premise advertising banner in conjunction with the city sign permit application • New vinyl mesh to match existing mesh (480”x336”) • Sign hardware, anchors and wiring is existing. Scope is to print a new banner and switch out the mesh.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Description of Project 2233 Park
• Replace existing mesh banner (480”x336”) with a new off premise advertising banner in conjunction with the city sign permit application
• New vinyl mesh to match existing mesh (480”x336”)
• Sign hardware, anchors and wiring is existing. Scope is to print a new banner and switch out the mesh.
2233 Park Ave Rear/West
2233 Park Ave Side/North
2233 Park Ave Front/East
2233 Park Ave Side/South
2233 Park Existing Banner (on premise ad)
Description of Existing Conditions
• The current wall is common brick within poured concrete pillars
• Current sign is 480”x336” and printed on vinyl mesh with reinforced hems and grommets attached to galvanized wires, clips and angle brackets attached to the brick with approximately 68 existing penetrations of ¼” tapcon screws
• The new project is OFF-PREMISES advertising. We have applied to the city for a permit and are currently gathering the necessary details, and permits
• Replacement is required because advertisers will be changing copy as they purchase space.
• The new materials for the sign faces changes will be consistent with existing
Application Specs of Current hardware. Penetrations approx. every 2’ (68) around perimeter (rendering is a depiction of what is existing)
Related Documents
