2010 CPUG CON Tobias Lachmann Check Point Troubleshooting

Check Point TroubleshootingOops! Its not working!

Introduction

Troubleshooting is more or less the same sinceyears

The great How to use fw monitor document is from 2003 still valid!

Some minor changes to buffer size, command lineoptions

New kernel modules introduced with R70 and R71, but no information officially available

We have to stick with the old stuff

How to approach troubleshootingCollect information

What is the problem? What are the symptoms?Can the problem be replicated?Random occurence?Anything changed in the setup?User-related or machine-related?List systems that are part of the conversation

Bug or configuration problem?

Common configuration problems:

Firewall rule prevents trafficSmartDefense / IPS blade prevents trafficAntispoofingmisconfigured routingwrong encryption domainwrong username / password

How to approach troubleshooting

How to approach troubleshootingAny reference for problem or error message?

official documentationSecureKnowledgeCPUG forumCheck Point forumGoogle

fw ctl zdebug dropReplicate the problem and have a look at the gateway:

fw ctl zdebug drop

lists all dropped packets in realtimegives an explanation why the packet is dropped

fw_log_drop: Packet proto=6 81.63.88.122:2720 -> 212.1.52.64:445 dropped by fw_handle_first_packet Reason: Rulebase drop -rule 12;

Why is it called zdebug? Developed by Tamir Zegman.

Firewall statusCurrent connections?

fw tab t connections s[Expert@firewallr70]# fw tab -t connections -sHOST NAME ID #VALS #PEAK #SLINKSlocalhost connections 8158 1 1 1

fw ctl pstat | grep Connections

[Expert@firewallr70]# fw ctl pstat | grep ConnectionsConcurrent Connections: 0% (1 out of 24900) - below low watermark

ClusterXL

Status information

fw hastatHOST NUMBER HIGH AVAILABILITY STATE MACHINE STATUSlocalhost 2 stand-by OK

cphaprob stateCluster Mode: New High Availability (Primary Up)Number Unique Address Assigned Load State1 192.168.55.202 100% Active2 (local) 192.168.55.201 0% Standby

ClusterXLDisplays ClusterXL Devices

cphaprob ia list

Displays physical and cluster interfaces

cphaprob a if

Statistics of ClusterXL sync

fw ctl pstatcphaprob syncstat

Reset statistics of ClusterXL sync

cphaprob reset syncstat

LicensesLimited number of hosts?

fw lichosts

Count of used hosts

fw lichosts | wc l

SecureClient licenses used

dtps lic

LicensesShow license

cplic printCompare to SmartUpdate / SmartView Monitor output

Especially UTM products sometimes tend to mess up with licenses which can cause Antivirus, Antispamor URL filtering to stop working

You need to keep contracts updated!

Use evaluation licenses for testing!

Content scanning

Verify update process of Antivirus or URL filteringusing avsu_client command

avsu_client app URL Filteringfetch_remote fi

for fetching the index file (signatures up-to-date?)

avsu_client app URL Filteringfetch_remote fe

for fetching entitlement / signatures

fw monitorWhat is it?

fw monitor command triggers a Check Pointkernel module that is used to capture packets.

What makes it different?

Packet capture at multiple positions within the kernelmodule chain, both for inbound and outboundpackets. It doesnt work on Layer-2, so no MAC addresses are shown in the output.

fw monitor is available on all platforms.

fw monitorWhat makes it different?

filters packets using INSPECT code

sees packets with the eyes of the gateway

Shows flow of packets through the gateway

No Layer-2 information in capture files

fw monitor

IP Routing IP

VM

NIC

VM

NIC

TCP

App.

TCP

App.

post-inbound (I)

pre-inbound (i) post-outbound (O)

pre-outbound (o)

fw monitor[Expert@fw1]# fw monitor -e "accept (src=212.1.52.68 ordst=212.1.52.68);"monitor: getting filter (from command line)monitor: compilingmonitorfilter:Compiled OK.monitor: loadingmonitor: monitoring (control-C to stop)eth3.7:i[52]: 212.1.56.233 -> 212.1.52.68 (TCP) len=52 id=18406TCP: 56661 -> 22 .S.... seq=b2f3509d ack=00000000eth3.7:I[52]: 212.1.56.233 -> 212.1.52.68 (TCP) len=52 id=18406TCP: 56661 -> 22 .S.... seq=b2f3509d ack=00000000eth0:o[52]: 212.1.56.233 -> 212.1.52.68 (TCP) len=52 id=18406TCP: 56661 -> 22 .S.... seq=b2f3509d ack=00000000eth0:O[52]: 212.1.56.233 -> 212.1.52.68 (TCP) len=52 id=18406TCP: 56661 -> 22 .S.... seq=b2f3509d ack=00000000eth0:i[52]: 212.1.52.68 -> 212.1.56.233 (TCP) len=52 id=0TCP: 22 -> 56661 .S..A. seq=68a919c9 ack=b2f3509eeth0:I[52]: 212.1.52.68 -> 212.1.56.233 (TCP) len=52 id=0TCP: 22 -> 56661 .S..A. seq=68a919c9 ack=b2f3509eeth3.7:o[52]: 212.1.52.68 -> 212.1.56.233 (TCP) len=52 id=0TCP: 22 -> 56661 .S..A. seq=68a919c9 ack=b2f3509eeth3.7:O[52]: 212.1.52.68 -> 212.1.56.233 (TCP) len=52 id=0TCP: 22 -> 56661 .S..A. seq=68a919c9 ack=b2f3509e

fw monitoreth3.7:O[52]: 212.1.52.68 -> 212.1.56.233 (TCP) len=52 id=0

TCP: 22 -> 56661 .S..A. seq=68a919c9 ack=b2f3509e

fw monitorfw monitor options overview

-u | s Shows UUID or SUUID for every packet-i write data to STDOUT-d | D debug / more debug output-e filter for expression (CLI mode)-f read filter expression from file-l limit length of captured packet-m which positions should be shown-x print raw packet data-o write packet into file-p|x| insert fw monitor at specific chain position-p all insert fwmonitor between all kernel modules-ci stop capture after count incoming packets-co stop capture after count outgoing packets

fw monitor

fw monitor

fw monitor -e "accept [9:1]=1;

Capture only ICMP packets

fw monitorCapture only packets from a special host

fw monitor -e "accept [12,b]=192.168.1.1;

fw monitorFiltering will be easier for you if you use macros.

Macros for fw monitor are defined in $FWDIR/lib/fwmonitor.def which references$FWDIR/lib/tcpip.def, where the actualexpression is located.

Example: filter for source IP

fwmonitor.def macro = srctcpip.def macro = ip_srcexpression = [12,b]

fw monitorUse macros together with operators to add

complexity:

accept (src=x.x.x.x or dst=x.x.x.x)

accept ((src=x.x.x.x, dst=y.y.y.y) or(src=y.y.y.y, dst=x.x.x.x));

accept not (sport=22 or dport=22);

accept sport=21 and not (src=x.x.x.x);

fw monitorUse fw monitor to see if packets are translated

fw monitor -e accept (src=212.1.56.151 or dst=212.1.56.151);eth0:i[48]: 212.1.56.151 -> 195.244.116.166 (TCP) len=48 id=27053eth0:I[48]: 212.1.56.151 -> 195.244.116.166 (TCP) len=48 id=27053eth1:o[48]: 212.1.56.151 -> 195.244.116.166 (TCP) len=48 id=27053eth1:O[48]: 212.1.56.151 -> 195.244.116.166 (TCP) len=48 id=27053

fw monitor -e accept (src=212.1.56.151 or dst=212.1.56.151);eth0:i[48]: 212.1.56.151 -> 195.244.116.166 (TCP) len=48 id=31171eth0:I[48]: 212.1.56.151 -> 192.168.199.2 (TCP) len=48 id=31171eth1:o[48]: 212.1.56.151 -> 192.168.199.2 (TCP) len=48 id=31171eth1:O[48]: 212.1.56.151 -> 192.168.199.2 (TCP) len=48 id=31171

fw monitorCommon expressions for fw monitor

fw monitor e accept (src=x.x.x.x ordst=x.x.x.x);

fw monitor m iO e accept host(x.x.x.x);

fw monitor e accept ((src=x.x.x.x, dst=y.y.y.y) or (src=y.y.y.y, dst=x.x.x.x));

fw monitor e accept (ip_p=x);

Combine with o for output into a file.

Inspect Code Generator: http://decock.org/ginspect/

fw monitorRead complex expressions from a filter file:

fw monitor f

If you use macros in a filter file, make sure to include the appropriate definition file.

#include fwmonitor.defaccept ((sport=22 or dport=22) and not(host(x.x.x.x));

Use for better analysis of capture files.

Preferences Protocols Ethernet Check boxAttempt to interpret as Firewall-1 monitor filePreferences Protocols FW-1 Activate UUID, chain position, summary in protocol tree

Add column fw1 chain of format FW-1 monitor if/directionAdd coloring rules

preIn Filter String fw1.direction == ipostIn Filter String fw1.direction == IpreOut Filter String fw1.direction == opostOut Filter String fw1.direction == O

fw monitor

fw monitorOn UTM-1 Edge

Setup Tools Packet Sniffer two modes: normal sniffer or fw monitor

On SecuRemote/SecureClient

srfw monitor o

Troubleshooting UTM-1 EdgeAnalyse local policy

Run info fw rules on command lineor WebUI Setup Tools Command Line

Analyse NAT policy

Run info nat on command lineor WebUI Setup Tools Command line

Troubleshooting UTM-1 EdgeCreate diagnostics file

Log into WebUI

Setup Tools Diagnostics

Troubleshooting UTM-1 EdgeIs the SMS process running on SmartCenter?

ps aux | grep sms

Is traffic reaching the SmartCenter?

fw monitor

libsw must be current, at least same version as latest firmware installed on a Edge.

Check /opt/CPEdgecmp-R71/libsw/version.txt[Expert@fwm]# head -n1 version.txtlibsw built with version 8.1.21

Troubleshooting UTM-1 EdgeSofaware Management Server Console

http://:9283/

- restart SMS - reload SMS settings- force policy update- reboot- reset local (Edge) password- view status information

Troubleshooting UTM-1 Edge

Troubleshooting UTM-1 EdgeDebugging Sofaware Management Server

Edit $FWDIR/conf/sofaware/SWManagement.iniChange in line containing LogPolicy1 the valueInfo to DebugSmsstopsms confdir $FWDIR/conf/sofaware

Replicate the problem and watch for console output.

Terminate programm and restart SMS afterwards

smsstart

Troubleshooting UTM-1 EdgeConfiguration for Edge Devices on SPLAT under/opt/CPEdgecmp-R71/tmp.pf ruleset.pfz compressed ruleset.topo topology for VPN.tpz compressed topology.p12 PKCS#12 certificateDelete files. Install policy again to re-generate them.Make sure, that the files are compiled and the Edge

gets the latest version.

Opening a service requestSubmit info to Check Point TAC or your CCSP/CSP

provide contact infodescribe Check Point environmentlist used gateway hardwareprovide info about network topology and hardwaredescribe the problem / the symptoms in detailwhat kind of business impact has this problem

recommendation: get your supporter on the phoneand be available for remote sessions

use chat tool!

Opening a service request

Create compressed CPInfo diagnostic file

/opt/CPinfo-10/bin/cpinfo z

Create compressed CPInfo diagnostic file including logs

/opt/CPinfo-10/bin/cpinfo l z

CPInfo files can be viewed using InfoView

Make sure to have the latest CPinfo build installed!Check sk30567 for instructions!

TAC organisation

Director TAC

INTL Support Escalations Diamond Services

3 Product TeamsHigh end

CoreVPN

Knowledge Center

3 Product TeamsHigh end

CoreVPN

Data SecurityEscalation

Secure Knowledge TechnicalPublications

Customer FocusProgrammers

TAC escalation

Support desk

Product team

Escalations

Customer focus programmer

TAC escalation path

{http://www.checkpoint.com/services/contact/escalation.html

General debugging

kernel mode user mode

rtmmodsimmodvpntmodvpnmodfwmod

usbcore

security serversmscpdfwdfwm

fw, VPN, FG-1, H323, BOA, WS, CPAS, CLUSTER, RTM, kiss, kissflow, multik, SFT, CI

kernel mode debugView kernel modules with fw ctl debug h

kiss ??????kissflow ???????fw "Firewall Module"h323 "VoIP H.323 Module"multik "related to CoreXL"BOA "Malicious Code Protection Module"WS "SmartDefense Web Intelligence Module"CI Content InspectionCPAS "Active Streaming Module"VPN "VPN Module"RTM "SmartView Monitor Module"SFT ???????Cluster "ClusterXL Module"FG-1 "Floodgate-1 QoS Module"

kernel mode debug

Some examples for modules and options:

Module: fwOptions: error warning cookie crypt domain ex driver filter hold if install ioctl kbufld log machine memory misc packet q xlatexltrc conn synatk media align balancechain bridge tcpstr scv ndis packval syncipopt link nat cifs drop

Module: vpnOptions: driver err packet policy sas rdpclear cipher init sr comp xl counters mspicphwd ref vin cluster nat l2tp warn

kernel mode debugfw ctl debug

Allocation of a buffer for the debug logsfw ctl debug buf [size in kb]

The main debug command

fw ctl debug m Writing the debug logs into a file

fw ctl kdebug T f o Stop debugging

fw ctl debug 0

kernel mode debugFilter debug, only lines with in it are

written to the output (best practice: error, failed)

fw ctl debug d

Filter debug, only lines that dont contain in it are written to the output

fw ctl debug d ^

Can be combined

fw ctl debug d error,failed,^packet

kernel mode debugStop debug messages when a certain string is

issued.

fw ctl debug s

Example:

fw ctl debug s error

kernel mode debugExample: debugging ClusterXL

fw ctl debug buf 32000fw ctl debug m fw + conn drop packet ifsync

fw ctl debug m cluster allfw ctl kdebug T f o

Example: debugging Site to Site VPN

fw ctl debug -buf 32000 fw ctl debug -m VPN all fw ctl debug -m fw + conn drop ld xlatexltrc nat

fw ctl kdebug T f o

kernel mode debugExample: debugging SIP

fw ctl debug buf 32000fw ctl debug m fw + conn drop vm sipfw ctl kdebug T f o

Example: debugging VoIP

fw ctl debug -buf 32000 fw ctl debug -m fw + conn drop vmfw ctl debug m h323 allfw ctl kdebug T f o

kernel mode debugExample: debugging SmartDefense

fw ctl debug buf 32000fw ctl debug m fw + conn drop vm tcp-strspii

fw ctl kdebug T f o

Example: debugging NAT

fw ctl debug -buf 32000 fw ctl debug -m fw + xlate xltrcfw ctl kdebug T f o

kernel mode debugExample: debugging QoS

fw ctl debug buf 32000fw ctl debug m FG-1 allfw ctl kdebug T f o

Example: debugging SmartView Monitor

fw ctl debug -buf 32000 fw ctl debug -m RTM allfw ctl kdebug T f o

VPN debugBest practice before starting debug

Compare configuration on both endsoften Phase I / Phase II parameters are not equal

which causes the VPN to failtake special notice of networks and subnet maskscarefully compare Pre-Shared-Secrets

Have a close look at the logs in SmartView Tracker

Most informations can be found in the logs

VPN debugTo determine status of VPN tunnels, use menu based

vpn tunnelutil vpn tu

or SmartView Monitor

To shutdown all VPN operation, use

vpn drv off

To enable VPN again, use

vpn drv oninstall policy

VPN debugVPN debugging events can be logged on the

gateway

vpn debug on

Debug output is written to $FWDIR/log/vpnd.elg

More details can be logged using the command

vpn debug on TDERROR_ALL_ALL=5

Turn off debugging with

vpn debug off

VPN debugIKE negotiations during VPN tunnel establishment

can be logged in ike.elg

On the gateway: vpn debug ikeon / vpn debug ikeoffDebug output is written to $FWDIR/log/ike.elg

VPN debugInitiate VPN and IKE debug together

vpn debug trunc

Disable VPN and IKE debug

vpn debug offvpn debug ikeoff

VPN debugCapture traffic using fw monitor

fw monitor e accept port(500) orport(4500); o monitor.out

Output file is monitor.out, IKE payloads areencrypted.

Capture traffic using vpn debug

vpn debug mon

Output file is ikemonitor.snoop, IKE payloads are in clear.

Turn off with vpn debug moff.

VPN debugOn UTM-1 Edge appliance:

WebUI -> Reports -> Tunnels -> save IKE traceClick Save IKE Trace, which creates ike.elg

user mode debug

General syntax

fw debug TDERROR_ALL_ALL=fw debug OPSEC_DEBUG_LEVEL=

Exception: cpd

fwm debugFWM controls connections from the SmartConsole to

the SmartCenter server and is responsible forpolicy related functions

To debug fwm do the followingfw debug fwm on TDERROR_ALL_ALL=5fw debug fwm on OPSEC_DEBUG_LEVEL=9

To stop debug run

fw debug fwm off TDERROR_ALL_ALL=0fw debug fwm off OPSEC_DEBUG_LEVEL=0

Logs are written to $FWDIR/log/fwm.elg

fwm debug[FWM 11927 1981476992]@firewallr70[8 Sep 18:46:32]fwnetobj_getbysicname: table_chosen_get_with_param(eTABLE_NETWORK_OBJECTS,

is_obj_SIC_name,IP=212.1.56.233,CN=Gui_Client) returned NULL.

Login failed: 212.1.56.233 is not allowed for remotelogin

[FWM 11927 1981476992]@firewallr70[8 Sep 18:46:32] fwm_log: Login failed fromIP=212.1.56.233,CN=Gui_Client: Unauthorized clientWed Sep 8 18:46:32 2010 (GMT): reject clientIP=212.1.56.233,CN=Gui_Client

[FWM 11927 1981476992]@firewallr70[8 Sep 18:46:32] PM_policy_query: rule not found.

[FWM 11927 1981476992]@firewallr70[8 Sep 18:46:32] PM_policy_query:

finished successfully. 1st method = deny

IP not defined in $FWDIR/conf/gui-clients

fwm debug[FWM 11927 1981476992]@firewallr70[8 Sep 18:48:07]fwm_cpmi_auth_handler: authenticating admin admin by

Name and Password[FWM 11927 1981476992]@firewallr70[8 Sep 18:48:07]

Administrator admin found in fwm database[FWM 11927 1981476992]@firewallr70[8 Sep 18:48:07]CBinObjCommon::PackLogData: Field number:12, Data

offset:34, Type:eFtCstring, Value:Administratorfailed to log in: Wrong Password

fwd debug

FWD daemon controls logging, alerts, communication with the kernel, OPSEC communication, invokes child processes (securityservers, ICA)

To debug fwd do the following

fw debug fwd on TDERROR_ALL_ALL=5

To stop debug run

fw debug fwd off TDERROR_ALL_ALL=0

Logs are written to $FWDIR/log/fwd.elg

Desktop log server debugTo debug dtls do the following

fw debug dtls on

To stop debug run

fw debug dtls off

Logs are written to $FWDIR/log/dtlsd.elg

Security servers debugSome examples for security servers:

FTP security server in.aftpdTelnet security server in.atelnetdHTTP security server in.ahttpdSMTP security server in.asmtpdClientAuth (900) in.ahclientdClientAuth (259) in.aclientdAntiSpam security server in.msdURL filtering security server in.aufpd

Security servers debugVerify that security server process exists. Check

$FWDIR/tmp for existing PID files.

Start debugging (example for FTP security server)

fw debug in.aftpd on FWAFTPD_LEVEL=3

Stop debugging

fw debug in.aftpd off FWAFTPD_LEVEL=3

cpd debugCPD controls SIC, Policy install

To debug cpd do the following

cpd_admin debug on TDERROR_ALL_ALL=5

To stop debug run

cpd_admin debug off TDERROR_ALL_ALL=0

Logs are written to $CPDIR/log/cpd.elg

Secure Platform debug

Sometimes it is useful to verify file integrity andversion against a test environment, for exampleafter installation of ad-hoc fixes or HFA.

Use md5sum for creating hashes.[Expert@fwm]# md5sum upgrade_importe6c6417cca9db098b94673dd420a4903 upgrade_import

Use cpvinfo for displaying version information.[Expert@fwm]# cpvinfo upgrade_import

Build Number = 730080036Major Release = NGXMinor Release = fli_up_gaRelease Number = 5.0.5Version Name = NGX

Secure Platform debugFor some problems with processes a core dump can

be usefull.

A core dump is a disk file that contains an image of the processs memory at the time of termination.

Core dumps are mainly used by Check Point R&D forfixing a specific problem.

Handling Core Fileshttp://downloads.checkpoint.com/dc/download.htm?ID=10479

Secure Platform debugTo enable core dumps do the following

ulimit c unlimited

um_core enable

Reboot

Check that /etc/sysconfig/enable_cores existafter Reboot.

Dumps will be in /var/log/dump/usermode

Debugging GUI clientsDebug GUI clients

Dashboard fwpolicy.exe d o fwp_debug.txtTracker cplgv.exe d o cplgv_debug.txtMonitor smartcons.exe d o smartcons_debug.txt

general syntax: -d o

Output is in specified directory or in

C:\Programme\CheckPoint\SmartConsole\R70\PROGRAM\data

if directory is omitted.

ResourcesSmartSPLAT from ada Ulucan

www.smartsplat.com

Resources

Resources

Resources

Resources

Resources

Resources

fw monitorhttp://www.checkpoint.com/techsupport/downloads/html/ethereal/fw_monitor_rev1_01.pdf

The CPinfo utility

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk30567

Documents related to troubleshootinghttp://blog.lachmann.org/2010/09/documents-related-to-troubleshooting/

Questions?

Still got a question?

Tobias Lachmann

[email protected]

http://blog.lachmann.org