2.00 Working with Special Fabrics Plaids, Stripes, Border Prints Napped Fabrics Formal fabrics Knits Leather & Vinyl.

2.00 Working with Special Fabrics

Plaids, Stripes, Border Prints

Napped Fabrics

Formal fabrics

Knits

Leather & Vinyl

Plaids Even plaids – are the same in both the

vertical and horizontal directions.

Use a “without nap” layout

Uneven plaids – use a “with nap” layout, so all pattern pieces are laid in the same direction

Use the dominant line for the center front and center back

Match plaid at side seams and sleeves.

Pin layers together key areas in both directions so the design matches perfectly and will not shift in cutting

Pattern Prep

Lap stitching lines on pattern pieces

Trace the design onto the pattern

Pattern Placement

Place the pattern pieces on the fabric so that the traced design matches the fabric.

Add interest

Eliminate some of the matching and add visual interest by cutting small details on the bias.

With stripes follow same instructions as for plaids

One way designs should be treated as plaids, use a “with nap” layout.

Border Prints use the crosswise grain. Match the design at the side seams.

Napped Fabrics Pile fabric has ends or loops of yarn extending above

the surface of the fabric.Terry clothCorduroyVelvetVelourSuede & Synthetic suede

Nap lies in one direction. The texture affects the color of the fabric.

Cut all pattern pieces in the same direction or there will be a noticeable color difference.

Guidelines for Pile Fabrics Choose a simple design Follow the “with nap” layout Mark with tailor’s tacks Hand basting may be necessary to prevent slippage. When pressing use a needle board or thick pile

fabric to prevent flattening the pile. Hold iron above the fabric and steam. Finger press to

set the fabric. Fleece cannot be pressed, the iron might leave an

impression.

Formal Fabrics – silk, damask, satin

Reflect light differently, depending on the way you hold them.

Use a “with nap” layout.May require a special needle.When pressing seams, use steam and

finger press. Silk will water spot, use only a dry iron.

Knits

Use “with nap” layout, looped yarns reflect light differently when viewed in opposite directions.

Use ballpoint needles and pins.

Best suited for serger, allows fabric to stretch.

Leather & Vinyl Require special tools

Teflon Presser footLeather needle – wedge-shaped

pointsRubber cementmasking taperotary cutter and matWax chalk for markingrubber mallet for “pressing” areas

Leather & Vinyl - prep Patterns with multi seams will make better

use of the skins Drop-shoulder sleeves require less easing Double check fit, alterations are difficult Layout pattern with finished side up Use masking tape to attach pattern to “fabric”.

DO NOT USE PINS! Use wax chalk for marking

Leather & Vinyl - construction Lengthen stitch to 3 Use wedge shaped needle Hand tie seam ends Interface as indicated on pattern, use interfacing

specifically for leather Use rubber mallet or clapper for flattening seams. Lapped seams are suitable Use rubber cement to “hem” garment Most leather garments are lined Use bound buttonholes & button backs to support

buttons.

Portfolio Samples Special fabrics. Matching Plaids Examples of uneven plaids, stripes (even & uneven),

one-way design, and picture of border print. Pile or napped fabric; one example of right method,

one of wrong method Formal Fabrics: french seam with lace fabric, fabric

swatches with picture, & information on working with silky textured, silk, satin, sheer fabrics summarized.

Samples of seams for knits with information about sewing knits.