16 STREET LIGHTING KAOS
16 street lighting
KAOs
KAOS
17
STRUCTURE
Lower supporting frame in die-cast
aLuminium en 1706, coLour raL 7021.
upper canopy in technopoLymer or die-cast
aLuminium en 1706 (kaos aLuminium) coLour
raL 7035, hinged in the front and cLosed in the
back with a fast-reLease hook in stainLess
steeL equipped with an anti-opening safety
Lock. mechanism to bLock the canopy in the
open position with a speciaL sLider that
prevents accidentaL cLosure. cabLe entry
into the device through ip66 cabLe gLand.
stainLess steeL screws and boLts.
universaL bracket Joint
Ø 60mm (Ø 42mm upon request).
post-top Ø 60-76mm.
totaL protection degree ip66.
insuLation cLass ii.
KAOS
18 street lighting
KAOs
19
ST
Coordinate system C-Gamma, polar graph.
250W SHP-T
street Lighting
OPTICAL UNIT
Lamp hoLder in porceLain integrated into the
gear tray, with the possibiLity to adJust the
Lamp focus according to its wattage.
possibiLity to adJust the Light beam in four
different positions according to the width
of the street.
high performance refLector in 99,85%
anodised and poLished aLuminium, fiXed to
the upper canopy. cLosing screen in fLat
tempered gLass guaranteeing compLiance
even with the strictest reference standards
concerning Light poLLution.
incLined brackets mounting system aLLows
to mantain the Luminaire paraLLeL to the
street surface. the device can be repositioned
to 0° by the reguLation settings -15°, -10°, -5°, 0°.
versions upon request:
semi-cut off bowL in trasparent pmma (onLy
kaos 1).
OC: symmetric optic for bicycLe and pedestrian
paths.
OP: asymmetric optic for pedestrian crossing.
AVAILABLE WATTAGES
KAOS 1
from 70w to 150w shp-mhL.
from 80w to 125w mbf.
KAOS 2
from 150w to 400w shp.
from 250w to 400w mhL.
250w mbf.
Coordinate system C-Gamma, polar graph. Coordinate system C-Gamma, polar graph.
150W SHP-T/0
street Lighting
150W SHP-T/3
street Lighting
180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Kaos250WSHP-T
60
60
120
180
240
300
180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Kaos150WSHP-T_0
70
70
140
210
280
350
180 120
105
90
75
60
45
105
90
75
60
45
30 3015 150
Kaos150WSHP-T_3
80
80
160
240
320
400
Gamma AnglesGamma Angles Gamma Angles
20 street lighting
KAOs
STREET LIGHTING H I L S Tab. R Lm U0 Ul Ti% Em Mf Tilt
KAOS2 250W SHP - T unilateral right 9 35 8,00 -1,00 c2 2,00 0,46 0,71 10,0% 35 0,80 0KAOS1 150W SHP - T unilateral right 8 29 8,00 0,00 c2 1,40 0,50 0,70 8,5% 26 0,80 0KAOS1 150W SHP - T unilateral right 8 35 8,00 0,00 c2 1,00 0,45 0,51 9,02% 19 0,80 0KAOS1 150W SHP - T POSIZ.3 unilateral right 8 28 7,00 -2,00 c2 1,20 0,60 0,70 7,7% 24 0,80 0KAOS1 100W SHP - T staggered 7 26 12,00 0,00 c2 1,50 0,63 0,79 7,0% 24 0,80 0KAOS1 70W SHP - T unilateral right 6 20 6,00 -0,50 c2 1,00 0,52 0,78 8,7% 18 0,80 0
INSTALLATION EXAMPLES
H: (m) post height.
I: (m) spacing.
L: (m) street width.
S: (m) device proJection.
Lm: (cd/m2) average Luminance.
U0: generaL uniformity.
Ul: LongitudinaL uniformity.
Ti: gLare factor.
Em: (LuX) average iLLumination.
Mf: maintenance coefficient.
Tilt: device incLination angLe.
21
WIRING
gear tray in insuLating gLass fibre
technopoLymer incLuding: power suppLy unit,
ignitor, capacitor and Lamp hoLder. gear tray
equipped with a fast-reLease system by means
of two LateraL spring knobs. the system makes
it possibLe to remove the entire eLectricaL unit
in one piece without the use of tooLs. on-Load
switch automaticaLLy interrupts the power
suppLy when the device is opened, aLLowing the
operator to work in maXimum safety.
insuLation cLass ii
REFERENCE STANDARDS
CE03
en 60598-1
en 60598-2-1
en 60598-2-3
22 street lighting
KAOs
23
410
688
228
688
380
622
622
211
KAOS 1: Lower frame in die-cast aLuminium raL
7021 and upper canopy in technopoLymer with
uv-protection treatment raL 7035.
KAOS 1 ALLUMINIUM: Lower frame in
die-cast aLuminium raL 7021 and upper canopy in
die-cast aLuminium raL 7035.
KAOS 2: Lower frame in die-cast aLuminium raL
7021 and upper canopy in technopoLymer with uv-
protection treatment raL 7035.
KAOS 2 ALLUMINIUM: Lower frame in
die-cast aLuminium raL 7021 and upper canopy
in die-cast aLuminium raL 7035.
OPTIONAL COLOURS:
siLver frame.
siLver canopy (onLy aLLuminium version).
other raL coLours upon request depending
on the quantity.
AVAILABLE VERSIONS AND COLOURS
LAMP KAOS 1
70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP
400 W SHP
70 W MHL e100 W MHL e150 W MHL e250 W MHL
400 W MHL
80 W MBF e125 W MBF e250 W MBF
KAOS 1 KAOS 2
LAMP KAOS 2
70 W SHP
100 W SHP
150 W SHP e-t250 W SHP e-t400 W SHP t
70 W MHL
100 W MHL
150 W MHL e250 W MHL e-t400 W MHL t
80 W MBF
125 W MBF
250 W MBF eversions for cdo-et and cdo-tt Lamps (order shp wiring) E: eLLipsoidaL T: tubuLar
KAOS 1 ALLUMINIUM KAOS 2 ALLUMINIUM
24
MK/K-SERIES BRACKETS
bracket made of hot-gaLvanised tubuLar
steeL, Ø 60mm.
post Joint in hot gaLvanised steeL
for posts series
pk - pn - pa - ec Ø 102mm.
upper doubLe cabLe tie in stainLess
steeL aisi 316.
cabLe-tie support ring for Ø 89/102mm
in hot gaLvanised steeL.
stainLess steeL screws and boLts.
siLver coLour.
versions:
• 3 proJections 200mm - 1000mm - 1500mm.
• units for posts with 1-2-3 brackets.
optionaL: terminaL point with bLue
or red Led.
street lighting
KAOs
25
Ø 102 200
Ø60
Ø102
Ø 89/102
Ø60 34
0
1500
Ø 102
Ø 89/102
340
Ø 6
0
1000
kit Led 1w with power suppLy unit
decorative post-top terminaL point
TYPE CODE
With luminous blue LED ppk2680001b1
With luminous red LED ppk2680001r1
TYPE COLOURS DESCRIPTION
MK–K 1.02 L= 200 1 side bracket MK–K 1.10 L= 1000 1 side bracket MK–K 1.15 L= 1500 1 side bracket MK–K 2.02 L= 200 unit with 2 bracketsMK–K 2.10 L= 1000 unit with 2 bracketsMK–K 2.15 L= 1500 unit with 2 bracketsMK–K 3.02 L= 200 unit with 3 bracketsMK–K 3.10 L= 1000 unit with 3 bracketsMK–K 3.15 L= 1500 unit with 3 brackets
siLver (cod. 01)
26 street lighting
KAOs
27
MB/K-SERIES BRACKETS
bracket made of hot-gaLvanised tubuLar
steeL, Ø 60mm with decorative cover in
mouLded aLuminium.
proJection 1000mm.
post-top Joint for posts
Ø 60-70mm.
device insertion Ø 60mm.
stainLess steeL screws and boLts.
coLour raL 7035 - 7021.
versions with 1-2-3 brackets.
RAL 7021 (COD. 06)RAL 7035 (COD. 05)
TYPECOLOURS
DESCRIPTIONBRACKET HOUSING AND FAIRING
MB/K 1.10 L= 1000 1 side bracket MB/K 2.10 L= 1000 unit with 2 bracketsMB/K 3.10 L= 1000 unit with 3 brackets
Ø 102300
1000Ø 48
Ø 6
0
1600
the post must be pre-set
with 3 head doweLs
130
Internal tube Ø48
Post Ø 60-70
N°3 dowels M8x120
N°3 dowels M10x120L.max 25
28 street lighting
KAOs
29
RAL 7021 (COD. 06)
TYPE COLOURS DESCRIPTION
MV/K 1.10 L= 1000 1 side bracket MV/K 2.10 L= 1000 unit with 2 bracketsMV/K 3.10 L= 1000 unit with 3 brackets
Ø42
300
Ø42
Ø102
1000
1600
the post must be pre-set
with 3 head doweLs
MV/K-SERIES BRACKETS
bracket made of hot-gaLvanised
tubuLar steeL,
with mouLded decorations in
gaLvanised steeL.
proJection 1000mm.
post-top Joint for posts
Ø 60-70mm.
device insertion Ø 60mm.
stainLess steeL screws and boLts.
coLour raL 7021.
versions with 1-2-3 brackets.
Post Ø 60-70
130
N°3 dowels M8x120
N°3 dowels M10x120L.max 25
30
6,5m
7,5m
8,5m
7,0m
5,2m
street lighting
KAOs
31
7,0m
9,5m
9,0m