2 street lighting lUnOiDe LUNOIDE - :: Silux :: WIRING gear tray in gLass fibre technopoLymer incLuding: power suppLy unit, ignitor, capacitor and Lamp hoLder; equipped with a fast-reLease

street lighting

lUnOiDe

LUNOIDE2

3

STRUCTURE

Lower supporting frame in die-cast aLuminium

en 1706, coLour raL 7038.

upper canopy in technopoLymer (Lunoide) or

die-cast aLuminium en 1706, coLour raL 7035

(Lunoide aLLuminium and aLLumcoLor, coLour

raL 5017 - 6028),

hinged in the front and cLosed in the back

with a fast-reLease hook in poLycarbonate.

mechanism to bLock the canopy in the open

position with a speciaL sLider that prevents

accidentaL cLosure. stainLess steeL screws

and boLts.

universaL Joint for horizontaL brackets

Ø 60mm and post-top Ø 60-70mm.

system for the incLination of the device,

consisting of a rotating unit in die-cast

aLuminium en 1706 with goniometric adJustment

every 4° - 5°.

post-connection pLate in aisi 304 stainLess steeL.

protection degree:

opticaL compartment ip66.

controL gear compartment ip44.

insuLation cLass i and ii.

LUNOIDE

4 street lighting

lUnOiDe

5

Coordinate system C-Gamma, polar graph.

street Lighting

OPTICAL UNIT

Lamp hoLder in porceLain with the possibiLity

to adJust the Lamp focus according to its

wattage. high performance cut-off optic

in 99.85% mouLded by drawing, anodised and

poLished aLuminium.

the prismatic pattern optimises the Light

emission and makes a LateraL opening of 75°

possibLe, even in the vp version;

in this way the spacing between the posts

can equaL 4 times the post height.

150W SHP-T 250W SHP-T

street Lighting

ST

AVAILABLE WATTAGES

from 70w to 400w shp-mhL.

from 80w to 250w mbf.

180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

Lunoide150WSHP-T

60

60

120

180

240

300

180 120

105

90

75

60

45

105

90

75

60

45

30 3015 150

Lunoide250WSHP-T

60

60

120

180

240

300

Gamma Angles Gamma Angles

Coordinate system C-Gamma, polar graph.

6 street lighting

lUnOiDe

H: (m) post height.

I: (m) spacing.

L: (m) street width.

S: (m) device proJection.

Lm: (cd/m2) average Luminance.

U0: generaL uniformity.

Ul: LongitudinaL uniformity.

Ti: gLare factor.

Em: (LuX) average iLLumination.

Mf: maintenance coefficient.

Tilt: device incLination angLe.

STREET LIGHTING H I L S Tab. R Lm U0 Ul Ti% Em Mf Tilt

LUNOIDE 250 W SHP-T staggered 9 36 18,00 1,00 c2 2,10 0,44 0,70 7,2% 34 0,80 0LUNOIDE 250 W SHP-T unilateral right 10 39 10,00 0,00 c2 1,50 0,49 0,73 8,98% 27 0,80 0LUNOIDE 150 W SHP-T unilateral right 8 35 8,00 0,00 c2 1,00 0,48 0,57 8,98% 18 0,80 0LUNOIDE 150 W SHP-T unilateral right 8 30 8,00 0,00 c2 1,10 0,50 0,72 8,17% 20 0,80 0LUNOIDE 100 W SHP-T unilateral right 7 28 7,00 0,00 c2 1,00 0,45 0,65 8,73% 17 0,80 0

INSTALLATION EXAMPLES

7

WIRING

gear tray in gLass fibre technopoLymer

incLuding: power suppLy unit, ignitor, capacitor

and Lamp hoLder; equipped with a fast-reLease

hook system that makes it possibLe to remove

the entire eLectricaL unit in a singLe piece

without the use of tooLs.

on-Load switch automaticaLLy interrupts

the power suppLy when the device is opened,

aLLowing the operator to work in maXimum

safety.

insuLation cLass i and ii.

REFERENCE STANDARDS

CE03

en 60598-1

en 60598-2-1

en 60598-2-3

8 street lighting

lUnOiDe

9

LUNOIDE: Lower frame in die-cast aLuminium

raL 7038 and canopy in technopoLymer with

uv-protection treatment raL 7035.

LUNOIDE ALLUMINIUM: Lower frame in die-

cast aLuminium raL 7038 and canopy in die-

VP: cut-off fLat gLass

cast aLuminium raL 7035.

LUNOIDE ALLUMCOLOR BLU RAL 5017:

Lower frame in die-cast aLuminium raL 7038

and canopy in die-cast aLuminium raL 5017.

LUNOIDE ALLUMCOLOR VERDE RAL 6028:

Lower frame in die-cast aLuminium raL 7038

and canopy in die-cast aLuminium raL 6028.

AVAILABLE VERSIONS AND COLOURS

LAMP LUNOIDE VP

70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP e-t400 W SHP t

70 W MHL e100 W MHL e150 W MHL e250 W MHL e-t400 W MHL t

80 W MBF e125 W MBF e250 W MBF e

360

715

305

715

/7660Ø

60Ø

LUNOIDE VP LUNOIDE PL LUNOIDE CL

LUNOIDE VP ALLUMINIUM LUNOIDE VP ALLUMCOLOR RAL 5017

LUNOIDE VP ALLUMCOLOR RAL 6028

LAMP LUNOIDE PL

70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP

400 W SHP

70 W MHL e100 W MHL e150 W MHL e250 W MHL

400 W MHL

80 W MBF e125 W MBF e250 W MBF

LAMP LUNOIDE CL

70 W SHP e-t100 W SHP e-t150 W SHP e-t250 W SHP e-t400 W SHP

70 W MHL e100 W MHL e150 W MHL e250 W MHL e-t400 W MHL

80 W MBF e125 W MBF e250 W MBF e

PL: semi-cut-off pmma bowL CL: semi-cut-off gLass bowL

versions for cdo-et and cdo-tt Lamps (order shp wiring) E: eLLipsoidaL T: tubuLar

360

715

305

715

/7660Ø

60Ø

10 street lighting

lUnOiDe

postØ60-65

postØ70-76

130

130

3 dowels M5x120

3 dowels M5x120

postØ60-65

postØ70-76

130

130

3 dowels M5x120

3 dowels M5x120

11

ML-SERIES BRACKETS

bracket consisting of a curved horizontaL

tube with Ø 60mm, proJection 1000mm.

Joint compatibLe with conicaL

or tapered posts Ø 60-65-70-76mm.

finaL spigot for Joint to the device

Ø 60mm, Length 100mm.

spigot for Joint to the post Ø 48mm, Length

200mm, with weLd washer disc

in turned steeL.

finaL connection to the post with

stainLess steeL doweLs.

centraL fairing Ø 350mm

in aLuminium sheet composed of two pieces

assembLed with stainLess steeL screws and

boLts.

bracket coLour: raL 7035.

decor (ovaL) coLour: raL 7038.

versions with 1-2-3-4 brackets.

when ordering, pLease state the post

diameter of the post diameter on which the

brackets are to be instaLLed.

350Ø

54Ø

305

315

1715

1000

RAL 7038 (COD. 09)

the post must be pre-set

with 3 head doweLs

RAL 7035 (COD. 05)

TYPECOLOURS

DESCRIPTIONBRACKET OVAL

ML 1.1 L= 1000 unit with 1 bracketML 2.1 L= 1000 unit with 2 bracketsML 3.1 L= 1000 unit with 3 bracketsML 4.1 L= 1000 unit with 4 brackets

12 street lighting

lUnOiDe

13

1715

1000

305Ø 4

2

300

Ø 42

Ø 102

MV/K-SERIES BRACKETS

bracket made of hot-gaLvanised tubuLar

steeL, Ø 42mm, with Joint spigot

Ø 60mm, curved, with mouLded decoration in

gaLvanised steeL.

proJection 1000mm.

post-top Joint for posts

Ø 60-70mm.

device insertion Ø 60mm.

stainLess steeL screws and boLts.

coLour raL 7035.

versions with 1-2-3 brackets.

the post must be pre-set

with 3 head doweLs

RAL 7035 (COD. 05)

TYPE COLOURS DESCRIPTION

MV/K 1.10 L= 1000 1 side bracket MV/K 2.10 L= 1000 unit with 2 bracketsMV/K 3.10 L= 1000 unit with 3 brackets

Post Ø 60-70

130

N°3 dowels M8x120

N°3 dowels M10x120L.max 25

14 street lighting

lUnOiDe

8,0m

9,0m

6,0m

15