print (PMS638C) size: 151 x 196mm 1500W ROTARY HAMMER BT-RH 1500 QUICK START GUIDE Easy steps to getting started. 1. Ensure all items, including your manual are removed from the packaging before discarding. 2. Ensure the side handle (6) is secured to the hammer drill by a clamp. Turning the handle anti-clockwise (looking from the handle) will release the clamp. Turning the handle clockwise will tighten the clamp. 3. Adjust the depth stop (7) to the appropriate drilling depth. 4. Insert the drill bit into the the chuck by pulling back and holding the locking sleeve (2). 5. Place the dust cap over the drill and push it towards the drill chuck before carrying out any hammer drilling vertically above your head . 6. Select mode of rotation (i.e. hammer drilling or chiselling) by adjusting the rotary switch (3). 7. Connect the power supply. 8. IF YOU ARE IN ANY DOUBT PLEASE REFER TO THE DETAILED INSTRUCTIONS WITHIN OUR MANUAL. 2 3 7 6
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
print (PMS638C)size: 151 x 196mm
1500WROTARY HAMMER
BT-RH 1500
QUICK START GUIDEEasy steps to getting started.
1. Ensure all items, including your manual are removed from the packaging before discarding.
2. Ensure the side handle (6) is secured to the hammer drill by a clamp. Turning the handle anti-clockwise (looking from the handle) will release the clamp. Turning the handle clockwise will tighten the clamp.
3. Adjust the depth stop (7) to the appropriate drilling depth.
4. Insert the drill bit into the the chuck by pulling back and holding the locking sleeve (2).
5. Place the dust cap over the drill and push it towards the drill chuck before carrying out any hammer drilling vertically above your head .
6. Select mode of rotation (i.e. hammer drilling or chiselling) by adjusting the rotary switch (3).
7. Connect the power supply.
8. IF YOU ARE IN ANY DOUBT PLEASE REFER TO THE DETAILED INSTRUCTIONS WITHIN OUR MANUAL.
2 3
7
6
Related Documents
