8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
1/13
Spare parts list
Handheld rotary hammers
© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
DKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
2/13
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
3/13
General information
This spare parts list applies to the following:
DescriptionPart number
Handheld rotary hammer DKR 368463 0103 60
Handheld rotary hammer DKR 36R8463 0103 50
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
Any unauthorized use or copying of the contents or any part thereof isprohibited. This applies in particular to trademarks, model denominations, partnumbers, and drawings.
Instructions for useThis spare parts list contains no safety regulations and is merely intended toassist in the ordering of spare parts.For information about operating, servicing, or repairing, the relevant Safetyand operating instructions must be consulted at all costs.Please observe the safety instructions listed in the relevant Safety and operatinginstructions!
5© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
Spare parts listDKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
4/13
Spare parts list
DKR 36
12
2
3
3
4
4
5
56
67
78
89
9
10
10
11
12 13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 33
34
34
35
36
3738
38
39
39
40
40
41
41
42
WA
xxx dB
43
44
© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-086
DKR 36, 36RSpare parts list
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
5/13
Part number QuantityRemarkDescriptionNo.
3315 1268 801Handle, complete1(2-10)
-1Handle2
-1Bushing3
3315 1270 001O-ring4
3315 1271 001Valve stem5
3315 1272 001Spring6
3315 1273 001Nipple7
3315 1274 001Oil felt8
3315 1275 001Oil plug9
3315 1276 001Pin10
3315 1277 001Trigger 11
3315 1278 001Gasket12
3315 1279 001Hose nipple13
3315 1280 001Valve cover 14
3315 1281 001Valve15
3315 1282 001Valve housing16
3315 1283 001Piston173315 1284 002Side bolt18
3315 1285 002Nut19
3315 1286 001Cylinder 20
3315 1287 001Intermediate part21
3315 1288 001Ratchet ring22
3315 1289 002Pawl spring23
3315 1290 002Pawl24
3315 1291 001Driver 25
3315 1292 001Front head26
3315 1293 001Plug27
3315 1294 0017Chuck bolt28
3315 1296 001Round 19 mm. Hexagon 14.7 x 89 mmRound 3 ⁄ 4 in. Hexagon 9 ⁄ 16 x 3 1 ⁄ 2 in.
Rotation chuck29
3315 1297 004Steel retainer ball30
3315 1299 001Retainer spring31
3315 1300 001Retainer, complete32(33-34)
-1Retainer 33
3315 1301 001Dust hood34
3315 1302 001Lock ring35
3315 1303 001Washer 36
3315 1304 001Silencer, complete37(38-41)
-1Silencer 38
3315 1305 006Screw393315 1306 0012Washer 40
3315 1307 006Nut41
-1Noise level label42
3310 1602 001Safety label43
-1Data plate44
7© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
Spare parts listDKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
6/13
DKR 36R
12
2
3
3
4
4
5
56
67
78
89
9
10
10
11
12 13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 33
34
34
35
36
3738
38
39
39
40
40
41
41
42
WA
xxx dB
43
44
© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-088
DKR 36, 36RSpare parts list
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
7/13
Part number QuantityRemarkDescriptionNo.
3315 1268 801Handle, complete1(2-10)
-1Handle2
-1Bushing3
3315 1270 001O-ring4
3315 1271 001Valve stem5
3315 1272 001Spring6
3315 1273 001Nipple7
3315 1274 001Oil felt8
3315 1275 001Oil plug9
3315 1276 001Pin10
3315 1277 001Trigger 11
3315 1278 001Gasket12
3315 1279 001Hose nipple13
3315 1280 001Valve cover 14
3315 1281 001Valve15
3315 1282 001Valve housing16
3315 1283 001Piston173315 1284 002Side bolt18
3315 1285 002Nut19
3315 1286 001Cylinder 20
3315 1287 001Intermediate part21
3315 1288 001Ratchet ring22
3315 1289 002Pawl spring23
3315 1290 002Pawl24
3315 1291 001Driver 25
3315 1292 001Front head26
3315 1293 001Plug27
3315 1294 0017Chuck bolt28
3315 1295 001Round 19 x 95 mmRound 3 ⁄ 4 x 33 ⁄ 4 in.
Rotation chuck29
3315 1297 004Steel retainer ball30
3315 1298 001Retainer spring31
3315 1300 001Retainer, complete32(33-34)
-1Retainer 33
3315 1301 001Dust hood34
3315 1302 001Locking ring35
3315 1303 001Washer 36
3315 1304 001Silencer, complete37(38-41)
-1Silencer 38
3315 1305 006Screw393315 1306 0012Washer 40
3315 1307 006Nut41
-1Noise level label42
3310 1602 001Safety label43
-1Data plate44
9© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
Spare parts listDKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
8/13
Working tools
Round 9 ⁄ 16 x 31 ⁄ 2 in. (14.7 x 89 mm)
Part number Wt (lb)LT (in.)L (in.)W (in.)DescriptionNo.
3083 3263 001.31281 ⁄ 4-Moil point1
3083 3264 001.31281 ⁄ 4-Narrow chisel2
Round 3 ⁄ 4 x 3 1 ⁄ 4 in. (19 x 95 mm)
Part number Wt (lb)LT (in.)L (in.)W (in.)DescriptionNo.
3083 4160 001.5106-Moil point13083 3261 002.21511-
3083 4161 001.5106-Narrow chisel23083 3262 002.21511-
3083 4165 001.81063Wide chisel3
3083 4162 001.395-Shaft for bush hammer 4
3083 3226 001.1--11 ⁄ 2Bush hammer TC head5
3083 3227 001.1--11 ⁄ 2Bush hammer TC head6
3083 4163 000.4--11 ⁄ 4Bush hammer steel head7
© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-0810
DKR 36, 36RSpare parts list
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
9/13
Part number Wt (lb)LT (in.)Bit diameter (in.)Drill depth (in.)DescriptionNo.
3083 4150 000.913Ø1 ⁄ 28Plug hole drill8
3083 4150 101.1151 ⁄ 2Ø1 ⁄ 2101 ⁄ 2Plug hole drill8
3083 4151 000.913Ø5 ⁄ 88Plug hole drill8
3083 4151 101.117Ø5 ⁄ 812Plug hole drill8
3083 4151 201.823Ø5 ⁄ 818Plug hole drill8
3083 4152 001.313Ø3 ⁄ 48Plug hole drill8
3083 4152 101.517Ø3 ⁄ 412Plug hole drill8
3083 4152 202.023Ø3 ⁄ 418Plug hole drill8
3083 4153 001.513Ø7 ⁄ 88Plug hole drill8
3083 4153 102.017Ø7 ⁄ 812Plug hole drill8
3083 4153 202.623Ø7 ⁄ 818Plug hole drill8
3083 4154 001.513Ø18Plug hole drill8
3083 4154 102.217Ø112Plug hole drill8
3083 4154 202.923Ø118Plug hole drill8
3083 4155 001.813Ø11 ⁄ 88Plug hole drill8
3083 4155 102.217Ø1
1
⁄ 8
12Plug hole drill83083 4155 202.923Ø11 ⁄ 818Plug hole drill8
3083 4156 002.013Ø11 ⁄ 48Plug hole drill8
3083 4156 102.217Ø11 ⁄ 412Plug hole drill8
3083 4156 202.923Ø11 ⁄ 418Plug hole drill8
Round 3
⁄ 4 in. - Hexagon 9
⁄ 16 x 31
⁄ 2 in. (19 mm - 14.7 x 89 mm)
Part number Wt (lb)LT (in.)Bit diameter
(in.)Drill depth (in.)RemarkDescriptionNo.
0701 0808 000701 1010 000701 1212 00
0.040.090.18
41 ⁄ 4
56
Ø5 ⁄ 16
Ø13 ⁄ 32
Ø1 ⁄ 2
34
43 ⁄ 4
Use with shankadapter
Plug hole drill8
0700 1416 320700 2019 320700 2022 320700 2025 320700 3032 320700 3038 32
0.91.11.31.52.23.1
101313131717
Ø5 ⁄ 8
Ø3 ⁄ 4
Ø7 ⁄ 8
Ø1Ø11 ⁄ 4
Ø11 ⁄ 2
6999
1313
Plug hole drill9
0701 1001 320.45--For 0.31, 0.39 and0.47 in. drills
Shank adapter 10
3085 0210 001.8---Use with shankadapter For 0.31, 0.39 and0.47 in. drills
Knock-outblock
11
11© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
Spare parts listDKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
10/13
Round 14.7 x 89 mm ( 9 ⁄ 16 x 3 1 ⁄ 2 in.)
Part number Wt (kg)LT (mm)L (mm)W (mm)DescriptionNo.
3083 3263 000.6300210-Moil point1
3083 3264 000.6300210-Narrow chisel2
Round 19 x 95 mm ( 3 ⁄ 4 x 3 1 ⁄ 4 in.)
Part number Wt (kg)LT (mm)L (mm)W (mm)DescriptionNo.
3083 4160 000.7255150-Moil point13083 3261 001.0380275-
3083 4161 000.7255150-Narrow chisel23083 3262 001.0380275-
3083 4165 000.825515075Wide chisel3
3083 4162 000.6230125-Shaft for bush hammer 4
3083 3226 000.5--40Bush hammer TC head5
3083 3227 000.5--40Bush hammer TC head6
3083 4163 000.2--32Bush hammer steel head7
Part number Wt (kg)LT (mm)Bit diameter (mm)Drill depth (mm)DescriptionNo.
3083 4150 000.4330Ø13200Plug hole drill8
3083 4150 100.5395Ø13265Plug hole drill8
3083 4151 000.5330Ø16200Plug hole drill8
3083 4151 100.6430Ø16300Plug hole drill8
3083 4151 200.8580Ø16450Plug hole drill8
3083 4152 000.6330Ø19200Plug hole drill8
3083 4152 100.7430Ø19300Plug hole drill8
3083 4152 200.9580Ø19450Plug hole drill8
3083 4153 000.7330Ø22200Plug hole drill8
3083 4153 100.9430Ø22300Plug hole drill8
3083 4153 201.2580Ø22450Plug hole drill8
3083 4154 000.7330Ø25200Plug hole drill8
3083 4154 101.0430Ø25300Plug hole drill8
3083 4154 201.3580Ø25450Plug hole drill8
3083 4155 000.8330Ø28200Plug hole drill8
3083 4155 101.0430Ø28300Plug hole drill8
3083 4155 201.3580Ø28450Plug hole drill8
3083 4156 000.9330Ø32200Plug hole drill8
3083 4156 101.0430Ø32300Plug hole drill8
3083 4156 201.3580Ø32450Plug hole drill8
© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-0812
DKR 36, 36RSpare parts list
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
11/13
Round 19 mm - Hexagon 14.7 x 89 mm (3 ⁄ 4 - 9 ⁄ 16 x 31 ⁄ 2 in.)
Part number Wt (kg)LT (mm)Bit diameter (mm)Drill depth (mm)RemarkDescriptionNo.
0701 0808 000701 1010 000701 1212 00
0.020.040.08
110130150
Ø8Ø10Ø12
80100120
Use with shankadapter
Plug hole drill8
0700 1416 320700 2019 320700 2022 320700 2025 320700 3032 320700 3038 32
0.40.50.60.71.01.4
250330330330430430
Ø16Ø19Ø22Ø25Ø32Ø38
150230230230330330
Plug hole drill9
0701 1001 320.2125--For 8, 10 and 12mm drills
Shank adapter 10
3085 0210 000.8---Use with shank
adapter For 8, 10 and 12mm drills
Knock-out
block
11
13© 2010 Atlas Copco Construction Tools AB | No. 9800 1211 01 | 2010-10-08
Spare parts listDKR 36, 36R
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
12/13
8/9/2019 Atlas Copco DKR-36 Rotary Hammer Parts List
13/13
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers, anddrawings.
www atlascopco com
©
2 0 1 0 A t l a s C o p c o C o n s t r u c t i o n T o o l s A B
| N o .
9 8 0 0 1 2 1 1 0 1 | 2 0 1 0 - 1 0 - 0 8
http://www.atlascopco.com/http://www.atlascopco.com/