1. Spray Nozzle - gpeco.comgpeco.com/admin/imgs/1493622698.7000-FIREFIGHTING... · 1. Spray Nozzle 2. Fire Hose Box and Fire Hose Box ... • Self-Standing / Wall Mounted ... •

1. Spray Nozzle2. Fire Hose Box and Fire Hose Box3. Barrel Fire Hydrant4. Water Monitor

Firefighting GroupWater Systems

90Persian GPE

Flat Spray Nozzle

• Model No.7010• Size ½’’″to 1’’ NPT • Flat Type

Application:• The GPE tank cooling water spray nozzles are

designed to produce wide angle flat spraying flows and are available in a wide range of bore sizes and materials. The 7000 series is ideally suited to the protection of storage tank shells and roofs and is widely used in process plant to protect equipment and structural members from the damaging effect of heat.

• The nozzle is also particularly effective in applications where a water screen is required to isolate a risk and to prevent the spread of fire or to protect escaping personnel from radiated heat.

Features and Benefits:• Minimizing the flow rate of spray nozzle:• The minimum flow rate of each spray nozzle

with any K-factor is determined with following equation:

• Flow (LPM) = K-Factor ´ • P =Minimum pressure = 1 BARG.

(Recommended)• The range of pressure = 1 to 6 BARG.

91 Persian GPE

• Model No.7020• Medium Velocity Water spray• Size ½” to1” NPT

Application:• The Model 7020 spray nozzles are open

(non-automatic) directional spray nozzles and are designed for use in water spray fixed systems for fire protection applications. They are external deflector type nozzles that discharge a uniformly filled cone of medium velocity water droplets.

• The 7020 Nozzles are effective in covering exposed vertical, horizontal, curved, and irregular shaped surfaces in a cooling spray to prevent excessive absorption of heat from an external fire and possible structural damage or spread of fire to the protected equipment.

• The Type 7020 nozzles are available in a wide variety of orifice sizes and spray angles (included angle of discharge) to provide versatility in system design.

• These spray nozzles are using in off-shore platforms, Refineries, Power Station, LPG &

LNG Plants, Spherical Tanks

Directional Spray Nozzle

Features and Benefits:• Minimum Flow Rate of Spray Nozzle:• The minimum flow rate of each spray nozzle

with different K-Factor determined with following equation:

• • Flow (Lpm) = K-Factor ´ • P =Minimum pressure = 1 Barg.

(Recommended)• The range of pressure = 1.0 to 5.0 Barg.• Recommended Pressure 1.5 to 3.5 Barg.• A= Spray Angle• D =Spray Distance from wall side• Theoretical Coverage Distance = (2×D) × tan(A)• B=Wet aCoverage Distance = 0.8(2×D) ×tan(A)

92Persian GPE

• Model No. 7200• Water Proof• Self-Standing / Wall Mounted• Indoor / Outdoor

Fire Hose Box and Hose Reel

Application:GPE fire hose/hose reel box used to store fire hose and equipment for outdoor use in industrial applications. The Hose Storage Cabinet, constructed of carbon steel or coat galvanized metal with two coats red baked enamel. Stainless steel piano hinges with chrome plated door latches.

Features and Benefits:• 0.8-1.5 mm Carbon Steel or

galvanized steel sheet.• Empty shelves 13” wide with 3/4” lip• 2” slope on roof• Rain trough over doors• Door reinforcement at front, top and

bottom• Doors overlap tub at hinge side• Piano hinge on both doors• Door lock (R.H. door only)• Chrome plated handle with 2 point

catch• Louvers on each end under bottom• shelf (optional-please specify)• Inside lips (front side)• 3” at top 1 ½” at bottom• 1” at sides and bottom• Two coats red baked enamel Ral 3020• To Specify: • Free Standing/without legs• Wall Mounted (with rear lugs top &

bottom)• Concrete Base Mounted (with

grouting lugs at bottom)• Support Mounted - legs packed

separately

93 Persian GPE

• Model 7400 Group

Application:• The Persian GPE fire hydrants provided under

this category are post type, Wet barrel, class A fire hydrants.

• Wet Barrel hydrants are available in different model as below:

Wet Barrel Fire Hydrant

Model No

Hose Connection Pumper Connection

MonitorSize(in)

TypeSize(in)

Type

7410 2 ½ Thread 4 Thread _

7412 2 ½ Thread 5 Thread _

7414 2 ½ Thread 4 Flanged _

7416 2 ½ Thread 5 Flanged _

7418 2 ½ Thread 4 Flanged With Single Arm Monitor

7420 2 ½ Thread 5 Flanged With Double Arm Monitor

7430 2 ½ Flanged 4 Thread _

7432 2 ½ Flanged 5 Thread _

7434 2 ½ Flanged 4 Flanged _

7436 2 ½ Flanged 5 Flanged _

7438 2 ½ Flanged 4 Flanged With Single Arm Monitor

7440 2 ½ Flanged 5 Flanged With Double Arm Monitor

Features and Benefits:• Persian GPE fire hydrant main valve is a Butterfly Valve type. The hydrant main valve • and operating parts including valve seat, valve seat insert are of bronze. Hydrant body consists of two

2½ inch hose nozzle and pumper nozzle in three sizes 4, 4½, 5 inches in tow Flanged and Threaded Types.

• These types of hydrants are available with water monitors.

94Persian GPE

Model No

Hose Connection Pumper ConnectionMonitor

Size

(in)Type

Size

(in)Type _

7510 2 ½ Thread 4 Thread _

7512 2 ½ Thread 5 Thread _

7514 2 ½ Thread 4 Flanged _

7516 2 ½ Thread 5 Flanged _

7518 2 ½ Thread 4 FlangedWith Single Arm

Monitor

7520 2 ½ Thread 5 FlangedWith Double Arm

Monitor

7530 2 ½ Flanged 4 Thread _

7532 2 ½ Flanged 5 Thread _

7534 2 ½ Flanged 4 Flanged _

7536 2 ½ Flanged 5 Flanged _

7538 2 ½ Flanged 4 FlangedWith Single Arm

Monitor

7540 2 ½ Flanged 5 FlangedWith Double Arm

Monitor

Dry Barrel Fire Hydrant

Application:• The Persian GPE Fire hydrants

provided under this category are post type.

• Dry barrel hydrants are available in different models as below:

Features and Benefits:• Persian GPE’s fire hydrant main

valve is a manual type. The hydrant main valve and operating parts including valve seat, valve seat insert are of bronze. Hydrant body consists of two 2½ inch hose nozzle and 4½ inch pumper nozzle, all with NFPA No. 194 standard Fire Hose Coupling Screw Threads.

• Model 7500 Group

95 Persian GPE

Application:• The Persian GPE handle monitor

comes with both a left/right and an up/down lock handle. To disengage lock(s), turn handle(s) counterclockwise. Move the tiller handle to direct the stream to the desired position. Turn lock handle(s) clockwise to engage lock.

Features and Benefits:• Corrosion resistant with brass

construction; • Unique configuration; • Flow up to 1250 gpm; • Compact -3” or 4” 150# ANSI

flange; • Vertical movement 90 degrees

above horizontal to 45 degrees below;

• Full, continuous 360 degree rotation;

• Rugged, stainless steel lock hardware;Grease fittings for easy lubrication;Durable Electro Statics finish.

Water Monitor• Model No. 7700• Sizes 3”or 4”• 2 No. Swivel Joint• Fixed Type• Manual Operating