-
RESUME November 12, 2015
1. Personal and Academic Matters
Name Lee, Kang Yong ()
Birth Date Jan. 19, 1947 Sex Male CitizenshipSouth
Korea
Present
Occupation
University Dalian University of Technology, China
Department Department of Engineering Mechanics
Position Full Professor (Full-Time)
Present
Address
Office
State Key Laboratory of Structural
Analysis for Industrial Equipment,
Department of Engineering Mechanics,
Dalian University of Technology,
Dalian 116024, P R China
Mobile
Phone86-139-4207-2501
E-mail [email protected], [email protected]
Degree University Major Graduation Year
Ph.D West Virginia
University, USA Mechanical Engineering 1978
M.S. Yonsei University,
Seoul, South Korea Mechanical Engineering 1971
B.S. Yonsei University,
Seoul, South Korea Mechanical Engineering 1969
2. Career
1971 ~ 1973 Researcher, Korean Institute of Science
Technology
1979 ~ 1980 Head of Division, Korea Institute of Machinery and
Materials
1980 ~ present Assistant Professor, Associate Professor, Full
Professor, Emeritus Professor, School of Mechanical Engineering,
Yonsei University, South Korea
1981 ~ 1983 Editorial Director, Korean Society of Mechanical
Engineers
-
1984 ~ 1985 UCLA visiting professor
1987 ~ 1988 Director, Alumni Association, College of
Engineering, Yonsei University, South Korea
1987 ~ 1990 Executive Secretary of Korea Branch, Asian-Pacific
Congress of Failure and Strength of Solids
1988 Executive Secretary of Korea Branch, VI Int. Cong. on Exp.
Mech. and Manufacture Exhibit
1988 ~ 1990
Executive Committee Member, International Symposium on Pressure
Vessel Technology and Nuclear Codes & Standards
Executive Secretary, Division of Material and Fracture, Korean
Society of Mechanical Engineers
Organizing Committee Member, Asia-Pacific Congress of Failure
and Strength-89
Advisory Committee Member, Korea Energy Institute
1989 Examiner, Test of Scholastic Ability for University
Admission, Ministry of Education, South Korea
1989 ~ 1991
Associate Dean, Graduate School of Engineering, Yonsei
University, South Korea
Advisory Committee Member , Korea Power Engineering Company
Director, Korean Society of Automobile Engineers
Editorial Director, Korean Society of Mechanical Engineers
1989 ~ 1993 Councilor, Korean Society for Aeronautical and Space
Science
Director, Asia-Pacific Congress of Failure and Strength of
Solids
1990 Chairman of Executive Committee, Fracture and Strength
'90
1990 ~ 1996 Council Committee Member of the Project of
Engineering Technology, Ministry of Industry, South Korea
Vice President, Korean Research Group of Acoustic Emission
1990 ~ 1993 Director, Korean Society of Theoretical and Applied
Mechanics
1991 ~ 1992
Advisor, Committee of Idea Suggestion Evaluation, Ministry of
Government Administration
Director, Korean Society of Mechanical Engineers
Director, Korean Society of Automobile Engineers
1991 ~ 1993 Chairman, Department of Mechanical Engineering,
Yonsei University, Seoul, South Korea
1991 ~ 1993 Councilor, Korean Society of Composite Materials
1992 ~ 1995 Executive Committee Member, Division of Electrical
Automobile of the G7 Nationals Project, South Korea
1992 ~ 1994 Committee Member of Machinery Design, Nuclear Power
Development Project, South Korea
-
1993 General Secretary, Korean Society of Mechanical
Engineers
1993 ~ 1994 Director, Korean Society of Automobile Engineers
1993 ~ 1997 Head of Mechanical Engineering, Graduate School of
Engineering, Yonsei University, South Korea
1993 ~ 1999 Judge of Korean New Technology Recognition
Judge of The Korean National Award of Jang Young Sil
1994 Planning Committee Member, National Research and
Development Project, Ministry of Science and Technology, South
Korea
1994 ~ 1995 Expert Committee Member for Development of Korean
Home-Made High Speed Subway
19941996 Editor-in-Chief, Newsletter of Professor Council,
Yonsei University, SouthKorea
Director, Professor Council of Yonsei University, South
Korea
1995 ~ 1996 Head, Division of Automobile Body and Chassis,
Korean Society of Automobile Engineers
1996
International Organizing Committee Member, The Fourth Pacific /
Asia Offshore Mechanics Symposium
Chairman of Executive Committee, Asian Pacific Conference for
Fracture and Strength'96
1996 ~ 1998 Advisory Committee Member, Inchon International
Airport Construction Project
1996 ~ Present Editorial Board, Material Science Forum (an
international journal)
1997
Technical Program Committee Member, FENDT'97
Director, Korean Society of Automobile Engineers
Advisory Committee Member, Korea Institute of Machinery and
Metals
1997 ~ 2001 Chairman, Committee of Academic Affairs, Alumni
Association, College of Engineering, Yonsei University, South
Korea
1998 Planning Evaluation Committee Member, Engineering
Technology Development Project, South Korea
Director, Korean Society of Mechanical Engineers
1998 ~ 1999 Director, Korean Society for Nondestructive
Testing
1999 General Secretary, Korean Society of Mechanical
Engineers
1999 ~ 2000 Head, Division of Automobile Body and Chassis,
Korean Society of Automobile Engineers
Director, Alumni Association, Yonsei University, Seoul, South
Korea
1999 ~ 2003 Representative, Korean Federation of Science and
Technology Societies
2000 Organizing Committee Member, FISITA Seoul 2000
-
Organizing Committee Member, Fourth International Conference on
Fracture and Strength of Solids
Project Leader, Core Technology of Brain Korea 21 Project,
Ministry of Education, South Korea
Auditor, Korean Society for Nondestructive Testing
Judge of Research Evaluation of Korea Railroad Research
Institute
Registered in Marquis Who's Who in the World
Registered in Outstanding People of the 20th Century,
International Biographical Center, England
2000~2012 President, Center for
Educational-Industrial-Institutional Cooperation, Yonsei
University, South Korea
2000~2002 Vice President, Korean Society of Mechanical
Engineers
2003 President, Korean Society of Mechanical Engineers
2001 ~ Present Member, The Korean Academy of Science and
Technology
2001 ~ 2009 Outstanding Achievement Professor, Yonsei
University, South Korea
2002 ~ 2012 Government Construction Technology Committee Member,
Kyoung-Ki-Do, South Korea
2002.4.21 Thank-You Letter for Contribution in Science and
Technology, President of South Korea, Kim Daejung
2003 Organizing Committee Member, 11th Asia-Pacific Conference
on Non-Destructive Testing, Jeju, South Korea
Advisory Committee Member, Korean Society for Engineering
Education
2003 ~ 2012 Member, Fellow, The National Academy of Engineering
of Korea
2003~ 2012 Design Advisory Committee Member, Environmental
Management Cooperation, South Korea
2003 ~ 2006 Vice President and Executive Director, The Korean
Federation of Engineering Organizations
2004 Chairman of Program Committee, The 1st International
Workshop on the Role of Engineering for the Sustainable
Development, Seoul, South Korea
2004 ~ Present Fellow of Wessex Institute of Great Britain
2004 ~2012 Central Committee Member for Deliberation on
Construction Technology, Ministry of Land, Transport and Maritime
Affairs, South Korea
2004 ~ 2005
General Secretary, Steering Committee, Division of Engineering,
The Korea Academy of Science and Technology
Recommendation Committee Member, The 1st Grand Prize, The
National Academy of Engineering of Korea
2006 Chairman of Mechanical Engineering Division, The Korea
Academy of Science and Technology
-
2006 ~ 2009 Steering Committee Member, The Korea Academy of
Science and Technology
2008 Invited Professor, University of Auckland, New Zealand,
Shandong University, China, and University of Malaya, Malaysia
2008.1 ~ 2010.12 Editor, Indian Journal of Engineering &
Materials Science (SCIE)
2013 ~ Present Emeritus Member, The National Academy of
Engineering of Korea
2013.4 Fellowship, Global Institute of Science and Technology,
Victoria, Australia
2012.3.1 ~2015.3.1 Full Professor, Department of Engineering
Mechanics, Dalian University of Technology, China
2012.3.1 ~ present Foreign Expert Confirmed by the State
Administration of Foreign Experts Affairs of the Peoples Republic
of China
2012 Lynchpin of making MOUs between Dalian University of
Technology, China and both Yonsei University, Seoul and Yeungnam
University, Kyungsan, South Korea
2013.4 The best paper (Simulation of solid particle erosion in
WC-Ni coated wall using CFD) award in the global engineering,
science and technology conference in Dubai, UAE, 1-2 April,
2013
2013.12 Invited speaker in the Korean Society of Mechanical
Engineers Annual Meeting in Seoul, Korea, December 18-20, 2013.
(The title of the paper was Behaviors between materials and
mankind: Is there similarity?)
2013 Fellowship by the Global Institute of Science &
Technology, Australia.
2014 Invited speaker in the Department of Precision and
Microsystems Engineering, Delft University of Technology,
Netherlands on March 16, 2014.
2015.3.1 ~ present Full-Time Professor of Special Appointment,
Department of Engineering Mechanics, Dalian University of
Technology, China
3. Awards
1987, 2009 Yonsei Academic Award, Yonsei University, South
Korea
1988 Academic Award, Korean Society of Mechanical Engineers ,
South Korea
1996, 2002 ~ 2005,
2007, 2008, 2011 Best Research Performance Professor Award,
Yonsei University, South Korea
2013
Best paper award, Simulation of solid particle erosion in WC-Ni
coated wall
using CFD Global Engineering, Science and Technology Conference,
1-2 April,
2013, Novotel World Trade Centre, Dubai, UAE
4. International Journal Papers
-
* : Corresponding Author 1 Sunder H. Advani*, L.Z. Schuck and
Kang Yong Lee, Stress response investigations related to in-
situ gasification of coal, Journal of Pressure Vessel
Technology, Transactions of the ASME, 1977, 99 Ser J(4), pp.
627-633.
2 Kang Yong Lee* and Sunder H. Advani, Fracture criteria and
stress intensity factors including the effect of crack closure,
Engineering Fracture Mechanics, 1982, 16(2), pp. 257-264.
3 Kang Yong Lee* and Sunder H. Advani, Critical loading
conditions and stress intensity factors for partial or entire
closure of a Griffith crack under thermo-mechanical loading,
International Journal of Fracture, 1983, 22(2), pp. 83-90.
4 Kang Yong Lee*, Contradiction of Jk integral, International
Journal of Fracture, 1986, 31(3), pp.
R53-R54. 5 Kang Yong Lee* and Taek Sung Lee, Fatigue limits of
crack initiation and propagation at notched
plates, Engineering Fracture Mechanics, 1986, 25(1), pp.
111-114.
6 Kang Yong Lee*, Dong Sung Won and Hyung Jip Choi, Boundary
element analysis of stress
intensity factors for Z-shaped cracks, Engineering Fracture
Mechanics, 1987, 27(1), pp. 75-82.
7 Kang Yong Lee* and Hyung Jip Choi, Boundary element analysis
of stress intensity factors for
bimaterial interface cracks, Engineering Fracture Mechanics,
1988, 29(4), pp. 461-472.
8 Kang Yong Lee* and Heung Soap Choi, Determination of thermal
stress intensity factors for
traction free cusp cracks under uniform heat flow, Engineering
Fracture Mechanics, 1988, 31(4),
pp. 661-672.
9 Kang Yong Lee*, Cyclic AE count rate and crack growth rate
under low cycle fatigue fracture
loading, Engineering Fracture Mechanics, 1989, 34(5-6), pp.
1069-1073.
10 Kang Yong Lee* and Heung Soap Choi, Determination of thermal
stress intensity factors for rigid
cusp cracks under uniform heat flow, Engineering Fracture
Mechanics, 1989, 32(2), pp. 183-193.
11 Kang Yong Lee* and Youn Ho Cho, Boundary element analysis of
thermal stress intensity factors
for cusp cracks, Engineering Fracture Mechanics, 1990, 37(4),
pp. 787-798.
12 Kang Yong Lee* and Kwan Bo Sim, Thermal shock stress
intensity factor by bueckner's weight
function method, Engineering Fracture Mechanics, 1990, 37(4),
pp. 799-804.
13 Kang Yong Lee* and Chang Won Shul, Determination of thermal
stress intensity factors for an
interface crack under vertical uniform heat flow, Engineering
Fracture Mechanics, 1991, 40(6), pp.
1067-1074.
14 Kang Yong Lee* and Jeong Soo Park, J-integral under transient
temperature state, Engineering
Fracture Mechanics, 1992, 43(6), pp. 931-940.
15 Kang Yong Lee* and Jeong Kyun Hong, Boundary element analysis
of thermal stress intensity
factors for cusp crack in transient state, Engineering Fracture
Mechanics, 1993, 45(3), pp. 309-320.
16 Kang Yong Lee* and Gun Young Kim, Fatigue crack growth in
consideration of mean stress and
damage accumulation, Engineering Fracture Mechanics, 1993,
46(1), pp. 165-171.
-
17 Kang Yong Lee* and Soon Man Kwon, Interlaminar fracture
toughness for composite materials,
Engineering Fracture Mechanics, 1993, 45(6), pp. 881-887.
18 Kang Yong Lee* and Yong Hoon Jang, Thermal stress analysis of
an infinite plate containing a
rigid inclusion of arbitrary shape, Engineering Fracture
Mechanics, 1993, 46(4), pp. 709-714.
19 Kang Yong Lee* and Yong Hoon Jang, Thermal stress intensity
factors for an interfacial crack on a
cusp-type inclusion, Engineering Fracture Mechanics, 1993,
44(3), pp. 459-472. 20 Kang Yong Lee* and Woon Cheon Baek, Boundary
element analysis of thermal stress intensity
factors for interface griffith and cusp cracks, Engineering
Fracture Mechanics, 1994, 47(6), pp.
909-918.
21 Hyung Jip Choi, Joon Sung Oh and Kang Yong Lee*,
Thermoelastic stress intensity factors for a
cracked layer between two different anisotropic solids,
Theoretical and Applied Fracture
Mechanics, 1994, 20(3), pp. 157-179. 22 Sung Ho Kim, Kang Yong
Lee* and Moon Bok Park, Mode I stress intensity factors for
cracked
layered material under arbitrary crack surface loading, Acta
Mechanica Solida Sinica, 1995, 8(Special Issue), pp. 160-164.
23 Sung Ho Kim, Kang Yong Lee* and Moon Bok Park, Mode I stress
intensity factors for layered material under anti-symmetric
loading, Engineering Fracture Mechanics, 1995, 51(5), pp.
837-846.
24 Tae Eun Jin, Hyung Jip Choi and Kang Yong Lee*, On collinear
crack in a layered medium with a
non-homogeneous interfacial region, Acta Mechanica Solida
Sinica, 1995, 8(Special Issue), pp.
589-596. 25 Kang Yong Lee* and Sang-Joon Park, Thermal stress
intensity factors for partially insulated
interface crack under uniform heat flow, Engineering Fracture
Mechanics, 1995, 50(4), pp. 475-482.
26 Hyung Jip Choi, Tae Eun Jin and Kang Yong Lee*, Transient
thermal stresses in a cladded semi-
infinite medium containing an underclad crack, Journal of
Thermal Stresses, 1995, 18(3), pp. 269-
290.
27 Kang Yong Lee* and Jong Sung Kim, Determination of stress
intensity factor for embedded
elliptical crack in turbine rotor, Engineering Fracture
Mechanics, 1996, 55(6) pp. 1013-1029. 28 Sung Ho Kim, Kang Yong
Lee* and Moon Bok Park, Mode II stress intensity factor for
layered
material under arbitrary shear crack surface loading,
Engineering Fracture Mechanics, 1996, 55(1), pp. 85-94.
29 Kang Yong Lee* and Jong Sung Kim, Determination of thermal
shock stress intensity factor for
elliptical crack by modified Vainshtok's weight function method,
Engineering Fracture Mechanics,
1997, 56(3), pp. 423-435.
30 Hyung Jip Choi, Kang Yong Lee* and Tae Eun Jin, Collinear
cracks in a layered half-plane with a
graded nonhomogeneous interfacial zone - Part I: Mechanical
response, International Journal of
Fracture, 1998, 94(2), pp. 103-122.
-
31 Hyung Jip Choi, Tae Eun Jin and Kang Yong Lee*, Collinear
cracks in a layered half-plane with a
graded nonhomogeneous interfacial zone - Part II: Thermal shock
response, International Journal
of Fracture, 1998, 94(2), pp. 123-135.
32 Sung Ho Kim, Kang Yong Lee* and Moon Bok Park, Mode II stress
intensity factors for
interlaminar cracked composites under arbitrary shear crack
surface loading, Engineering Fracture
Mechanics, 1998, 59(4), pp. 509-520.
33 Kang Yong Lee* and Ok Whan Kim, Stress intensity factor for
sheet-reinforced and cracked plate
subjected to remote normal stress, Engineering Fracture
Mechanics, 1998, 61(3-4), pp. 461-468.
34 Sung Ho Kim, Kang Yong Lee* and Moon Bok Park, Stress
intensity factors for interlaminar
cracked composites under arbitrary normal crack surface loading,
International Journal of Solids
and Structures, 1998, 35(33), pp. 4355-4367.
35 Kang Yong Lee* and Taek Sung Lee, Hygrothermal fracture
analysis of plastic IC package in
reflow soldering process, Journal of Electronic Packaging, 1999,
121(3), pp. 148-155.
36 Sung Ho Kim, Kang Yong Lee* and Sung Chul Joo, Stress
intensity factor for orthotropic three
layered material with crack under arbitrary anti-plane shear,
Theoretical and Applied Fracture
Mechanics, 1999, 32(2), pp. 101-109.
37 Ku Young Kim and Kang Yong Lee*, Anti-plane shear crack in a
piezoelectric layer bonded to
dissimilar half spaces, JSME International Journal Series A,
1999, 42(1), pp. 66-75. 38 Soon Man Kwon and Kang Yong Lee*,
Analysis of stress and electric fields in a rectangular
piezoelectric body with a center crack under anti-plane shear
loading, International Journal of Solids and Structures, 2000,
37(35), pp. 4859-4869.
39 Jeong Woo Shin and Kang Yong Lee*, Eccentric crack in a
piezoelectric strip bonded to half
planes. European Journal of Mechanics a-Solids, 2000. 19(6): pp.
989-997.
40 Jeong Woo Shin, Soon Man Kwon and Kang Yong Lee*, Eccentric
crack in a piezoelectric strip
under electro mechanical loading. Journal of Applied Mechanics -
Transactions of the ASME,
2000. 67(4): pp.846-847.
41 Sung Ho Kim, Kang Yong Lee* and Sung Chul Joo, Effect of
fiber volume fraction on the stress
intensity factors for multi layered composites under arbitrary
anti-plane shear loading, KSME
International Journal, 2000, 14(9), pp. 920-927. 42 Kang Yong
Lee* and Won Gyu Lee and Y. Eugene Park, Interaction between a
semi-infinite crack
and a screw dislocation in a piezoelectric material, Journal of
Applied Mechanics-Transactions of the ASME, 2000, 67(1), pp.
165-170.
43 Kwon, J.H. and Kang Yong Lee*, Interface crack between
piezoelectric and elastic strips, Archive
of Applied Mechanics, 2000, 70(10), pp. 707-714.
44 Soon Man Kwon and Kang Yong Lee*, Mode I field intensity
factors of infinitely long strip in
piezoelectric media, KSME International Journal, 2000, 14(8),
pp. 845-850. 45 Jong Ho Kwon, Kang Yong Lee* and Soon Man Kwon,
Moving crack in piezoelectric ceramic
-
strip under anti-plane shear loading, Mechanics Research
Communications, 2000, 27(3), pp.327-332.
46 Jong Ho Kwon and Kang Yong Lee*, Moving interfacial crack
between piezoelectric ceramic and
elastic layers, European Journal of Mechanics a-Solids, 2000,
19(6), pp. 979-987.
47 Kang Yong Lee* and Byung Seok Kong, Theoretical and
experimental studies for the failure
criterion of adhesively bonded joints, Journal of Adhesion
Science and Technology, 2000, 14(6),
pp. 817-832.
48 Jeong Woo Shin, Soon Man Kwon and Kang Yong Lee*, An
eccentric crack in a piezoelectric strip
under anti-plane shear impact loading, International Journal of
Solids and Structures, 2001, 38(9),
pp. 1483-1494.
49 Soon Man Kwon and Kang Yong Lee*, Constant moving crack in a
piezoelectric block: anti-plane
problem, Mechanics of Materials, 2001, 33(11), pp. 649-657.
50 Jong Ho Kwon and Kang Yong Lee*, Crack problem at interface
of piezoelectric strip bonded to
elastic layer under anti-plane shear, KSME International
Journal, 2001, 15(1), pp. 61-65. 51 Chang Won Shul and Kang Yong
Lee*, Dynamic response of subsurface interface crack in
multilayered orthotropic half-space under anti-plane shear
impact loading, International Journal of
Solids and Structures, 2001, 38(20), pp. 3563-3574.
52 Jeong Woo Shin, Soon Man Kwon and Kang Yong Lee*, Eccentric
crack in a piezoelectric strip
under electro-mechanical loading, KSME International Journal,
2001, 15(1), pp. 21-25.
53 Soon Man Kwon and Kang Yong Lee*, Eccentric crack in
rectangular piezoelectric medium under
electromechanical loadings, Acta Mechanica, 2001, 148(1-4), pp.
239-248.
54 Soon Man Kwon and Kang Yong Lee*, Edge cracked piezoelectric
ceramic block under
electromechanical impact loading, International Journal of
Fracture, 2001, 112(2), pp. 139-150.
55 Jong Ho Kwon and Kang Yong Lee*, Electro-mechanical analysis
of an interfacial crack between a
piezoelectric and two orthotropic layers, Archive of Applied
Mechanics, 2001, 71(12), pp. 841-
851.
56 Y.Z. Chen* and Kang Yong Lee, Numerical solution of Rayleigh
equation in non-linear vibration,
Communications in Numerical Methods in Engineering, 2001, 17(4),
pp. 253-258.
57 Y.Z. Chen* and Kang Yong Lee, Numerical solution of
three-dimensional crack problem by using
hypersingular integral equation, Computer Methods in Applied
Mechanics and Engineering, 2001,
190(31), pp. 4019-4026.
58 Ji Hyuck Yang and Kang Yong Lee*, Penny shaped crack in a
three-dimensional piezoelectric strip
under in-plane normal loadings, Acta Mechanica, 2001, 148(1-4),
pp. 187-197.
59 Y.Z. Chen* and Kang Yong Lee, Torsion of orthotropic bars
with L-shaped or cruciform cross-
section, Communications in Numerical Methods in Engineering,
2001, 17(3), pp. 149-163. 60 Soon Man Kwon and Kang Yong Lee*,
Transient response of a rectangular piezoelectric medium
-
with a center crack, European Journal of Mechanics a-Solids,
2001, 20(3), pp. 457-468.
61 Chang Won Shul and Kang Yong Lee*, A subsurface eccentric
crack in a functionally graded
coating layer on the layered half-space under an anti-plane
shear impact load, International Journal
of Solids and Structures, 2002, 39(7), pp. 2019-2029.
62 Y.Z. Chen and Kang Yong Lee*, An infinite plate weakened by
periodic cracks, Journal of Applied
Mechanics-Transactions of the ASME, 2002, 69(4), pp.
552-555.
63 Jung Seek Lee, Soon Man Kwon, Kang Yong Lee* and Jong Ho
Kwon, Anti-plane interfacial
Yoffe-crack between a piezoelectric and two orthotropic layers,
European Journal of Mechanics a-
Solids, 2002, 21(3), pp. 483-492.
64 Kang Yong Lee* and Sung Gyu Kwak, Determination of stress
intensity factors for bimaterial
interface stationary rigid line inclusions by boundary element
method, International Journal of
Fracture, 2002, 113(3), pp. 285-294.
65 Y.Z. Chen and Kang Yong Lee*, Discussion: "On the
Relationship Between the L-Integral and the
Bueckner Work-Conjugate Integral" (Shi, J.P., Liu, X.H. and
Li,J., 2000 ASME J. Appl. Mech., 67,
pp.828-829), Journal of Applied Mechanics-Transactions of the
ASME, 2002, 69(5), p. 711. 66 Jong Ho Kwon and Kang Yong Lee*,
Electromechanical effects of a screw dislocation around a
finite crack in a piezoelectric material, Journal of Applied
Mechanics-Transactions of the ASME,
2002, 69(1), pp. 55-62.
67 Soon Man Kwon and Kang Yong Lee*, Impact response of an
interface crack in a hybrid
piezoelectric laminate, Archive of Applied Mechanics, 2002,
72(4-5), pp. 318-329. 68 Soon Man Kwon, Jung Seek Lee and Kang Yong
Lee*, Moving eccentric crack in a piezoelectric
strip bonded to elastic half planes, International Journal of
Solids and Structures, 2002, 39(17), pp.
4395-4406.
69 Soon Man Kwon, Hyo Seung Choi and Kang Yong Lee*, Moving
eccentric crack in a piezoelectric
strip bonded to elastic materials, Archive of Applied Mechanics,
2002, 72(2-3), pp. 160-170.
70 Y.Z. Chen and Kang Yong Lee*, Solution of flat crack problem
by using variational principle and
differential-integral equation, International Journal of Solids
and Structures, 2002, 39(23), pp.
5787-5797.
71 Y.Z. Chen* and Kang Yong Lee, Some properties of J-integral
in plane elasticity, Journal of
Applied Mechanics-Transactions of the ASME, 2002, 69(2), pp.
195-198. 72 Ji Hyuck Yang and Kang Yong Lee*, Three-dimensional
non-axisymmetric behavior of a penny
shaped crack in a piezoelectric strip subjected to in-plane
loads, European Journal of Mechanics a-
Solids, 2002, 21(2), pp. 223-237.
73 Soon Man Kwon, Myung Seob Son and Kang Yong Lee*, Transient
behavior in a cracked
piezoelectric layered composite: anti-plane problem, Mechanics
of Materials, 2002, 34(9), pp. 593-
-
603.
74 Y.Z. Chen and Kang Yong Lee*, Two-dimensional elastic
analysis of doubly periodic circular
holes in infinite plane, KSME International Journal, 2002,
16(5), pp. 655-665.
75 Soon Man Kwon and Kang Yong Lee*, Yoffe-type moving edge
crack in a piezoelectric block,
Acta Mechanica, 2002, 153(1-2), pp. 23-32.
76 W.Q. Chen* and Kang Yong Lee*, Alternative state space
formulations for magnetoelectric
thermoelasticity with transverse isotropy and the application to
bending analysis of
nonhomogeneous plates, International Journal of Solids and
Structures, 2003, 40(21), pp. 5689-
5705.
77 Soon Man Kwon and Kang Yong Lee*, An anti-plane propagating
crack in a functionally graded
piezoelectric strip bonded to a homogeneous piezoelectric strip,
Archive of Applied Mechanics,
2003, 73(5-6), pp. 348-366.
78 Kang Yong Lee* and Jin Woo Kang, Boundary element analysis
for thermomechanical interface
stress in the thin-layered media under sliding contact,
Engineering Analysis with Boundary
Elements, 2003, 27(6), pp. 583-587.
79 Xian-Fang Li* and Kang Yong Lee, Discussion: "On global
energy release rate of a permeable
crack in piezoelectric ceramic" (Li, S., 2003 ASME J. Appl.
Mech., 70, pp.246-252), Journal of
Applied Mechanics-Transactions of the ASME, 2003, 70(6),
pp.930-931.
80 Ji Hyuck Yang and Kang Yong Lee*, Penny shaped crack in a
piezoelectric cylinder surrounded
by an elastic medium subjected to combined in-plane mechanical
and electrical loads, International
Journal of Solids and Structures, 2003, 40(3), pp. 573-590.
81 Ji Hyuck Yang and Kang Yong Lee*, Penny-shaped crack in a
piezoelectric cylinder under
electro-mechanical loads, Archive of Applied Mechanics, 2003,
73(5-6), pp. 323-336.
82 Y.Z. Chen* and Kang Yong Lee, Pseudo-linearization procedure
of nonlinear ordinary differential
equations for large deflection problem of circular plates,
Thin-Walled Structures, 2003, 41(4), pp.
375-388.
83 Soon Man Kwon and Kang Yong Lee*, Steady state crack
propagation in a piezoelectric layer
bonded between two orthotropic layers, Mechanics of Materials,
2003, 35(11), pp. 1077-1088.
84 Y.Z. Chen and Kang Yong Lee*, Analysis of the M-integral in
plane elasticity, Journal of Applied
Mechanics-Transactions of the ASME, 2004, 71(4), pp.
572-574.
85 C.Y. Dong* and Kang Yong Lee, Anisotropic thin plate bending
problems by Trefftz boundary
collocation method, Engineering Analysis with Boundary Elements,
2004, 28(9), pp. 1017-1024.
86 Ji Hyuck Yang, Kang Yong Lee* and C.Y. Dong, Application of
the axiomatic design
methodology to the design of PBGA package with polyimide coating
layer, KSME International
Journal, 2004, 18(9), pp. 1572-1581.
-
87 X.F. Li and Kang Yong Lee*, Crack growth in a piezoelectric
material with a Griffith crack
perpendicular to the poling axis, Philosophical Magazine, 2004,
84(18), pp. 1789-1820.
88 Xian-Fang Li* and Kang Yong Lee, Dynamic behavior of a
piezoelectric ceramic layer with two
surface cracks, International Journal of Solids and Structures,
2004, 41(11-12), pp. 3193-3209.
89 Soon Man Kwon and Kang Yong Lee*, Dynamic response of an
anti-plane shear crack in a
functionally graded piezoelectric strip, KSME International
Journal, 2004, 18(3), pp. 419-431.
90 She-Xu Zhao and Kang Yong Lee*, Eccentric crack problem in
soft ferromagnetic elastic strip
under uniform magnetic field, Archive of Applied Mechanics,
2004, 73(11-12), pp. 799-811.
91 Xian-Fang Li* and Kang Yong Lee, Effects of electric field on
crack growth for a penny-shaped
dielectric crack in a piezoelectric layer, Journal of the
Mechanics and Physics of Solids, 2004,
52(9), pp. 2079-2100.
92 Xian-Fang Li and Kang Yong Lee*, Electric and elastic
behaviors of a piezoelectric ceramic with
a charged surface electrode, Smart Materials & Structures,
2004, 13(2), pp. 424-432.
93 Xian-Fang Li and Kang Yong Lee*, Electro-elastic behavior
induced by an external circular crack
in a piezoelectric material, International Journal of Fracture,
2004, 126(1), pp. 17-38.
94 Xian-Fang Li and Kang Yong Lee*, Electroelastic behavior of a
rectangular piezoelectric ceramic
with an antiplane shear crack at arbitrary position, European
Journal of Mechanics a-Solids, 2004,
23(4), pp. 645-658.
95 W.Q. Chen and Kang Yong Lee*, Exact solution of angle-ply
piezoelectric laminates in cylindrical
bending with interfacial imperfections, Composite Structures,
2004, 65(3-4), pp. 329-337.
96 Xian-Fang Li* and Kang Yong Lee*, Fracture analysis of
cracked piezoelectric materials,
International Journal of Solids and Structures, 2004, 41(15),
pp. 4137-4161.
97 Ji Hyuck Yang and Kang Yong Lee*, Fracture analysis of
electronic IC package in reflow
soldering process, KSME International Journal, 2004, 18(3), pp.
357-369.
98 W.Q. Chen, Kang Yong Lee* and H. Ding, General solution for
transversely isotropic magneto-
electro-thermo-elasticity and the potential theory method,
International Journal of Engineering
Science, 2004, 42(13-14), pp. 1361-1379.
99 Geun Woo Kim and Kang Yong Lee*, Improving the reliability of
the plastic IC package in reflow
soldering process by optimization, IEEE Transactions on
Components and Packaging
Technologies, 2004, 27(2), pp. 352-358.
100 Ji Hyuck Yang and Kang Yong Lee*, Nonaxisymmetric dynamic
problem of a penny-shaped
crack in a three-dimensional piezoelectric strip under normal
impact loads, Journal of Applied
Mechanics-Transactions of the ASME, 2004, 71(4), pp.567-571.
101 W.Q. Chen and Kang Yong Lee*, On free vibration of cross-ply
laminates in cylindrical bending,
Journal of Sound and Vibration, 2004, 273(3), pp. 667-676.
-
102 C.Y. Dong* and Kang Yong Lee, Stress analysis of an infinite
anisotropic elastic medium
containing inclusions using the boundary point method,
Engineering Analysis with Boundary
Elements, 2004, 28(11), pp. 1293-1302.
103 W.Q. Chen* and Kang Yong Lee, Stresses in rotating cross-ply
laminated hollow cylinders with
arbitrary thickness, Journal of Strain Analysis for Engineering
Design, 2004, 39(5), pp. 437-445.
104 W.Q. Chen, Geun Woo Kim and Kang Yong Lee*, The effect of
viscous interfaces on the bending
of orthotropic rectangular laminates, Composite Structures,
2005, 67(3), pp. 323-331.
105 Xian-Fang Li and Kang Yong Lee*, Three-dimensional
electroelastic analysis of a piezoelectric
material with a penny-shaped dielectric crack, Journal of
Applied Mechanics-Transactions of the
ASME, 2004, 71(6), pp. 866-878.
106 W.Q. Chen and Kang Yong Lee*, Three-dimensional exact
analysis of angle-ply laminates in
cylindrical bending with interfacial damage via state-space
method, Composite Structures, 2004,
64(3-4), pp. 275-283.
107 W.Q. Chen and Kang Yong Lee*, Time-dependent behaviors of
angle-ply laminates with viscous
interfaces in cylindrical bending, European Journal of Mechanics
a-Solids, 2004, 23(2), pp. 235-
245.
108 Soon Man Kwon and Kang Yong Lee*, Transient response of a
permeable crack normal to a
piezoelectric-elastic interface: Anti-plane problem, KSME
International Journal, 2004, 18(9), pp.
1500-1511.
109 C.Y. Dong* and Kang Yong Lee, A new integral equation
formulation of two-dimensional
inclusion-crack problems, International Journal of Solids and
Structures, 2005, 42(18-19), pp.
5010-5020.
110 Xiang-Fang Li and Kang Yong Lee*, A piezoelectric material
with a periodic distribution of slant
mode-III cracks, Mechanics of Materials, 2005, 37(1), pp.
189-200.
111 Ji Hyuck Yang and Kang Yong Lee*, Application of a design of
experiments approach to the
reliability of a PBGA package, Soldering & Surface Mount
Technology, 2005, 17(3), pp. 43-53.
112 W.Q. Chen and Kang Yong Lee*, Benchmark solution of
angle-ply piezoelectric-laminated
cylindrical panels in cylindrical bending with weak interfaces,
Archive of Applied Mechanics,
2005, 74(7), pp. 466-476.
113 C.Y. Dong* and Kang Yong Lee, Boundary element analysis of
infinite anisotropic elastic
medium containing inclusions and cracks, Engineering Analysis
with Boundary Elements, 2005,
29(6), pp. 562-569.
114 Jin Pyo Jung, Geun Woo Kim and Kang Yong Lee*, Critical
thrust force at delamination
propagation during drilling of angle-ply laminates, Composite
Structures, 2005, 68(4), pp. 391-
397.
-
115 Geun Woo Kim and Kang Yong Lee*, Critical thrust force at
propagation of delamination zone
due to drilling of FRP/metallic strips, Composite Structures,
2005, 69(2), pp. 137-141.
116 W.Q. Chen, Jin Pyo Jung, Geun Woo Kim and Kang Yong Lee*,
Cross-ply laminated cylindrical
panels with viscous interfaces subjected to static loading,
European Journal of Mechanics a-Solids,
2005, 24(5), pp. 728-739.
117 Ji Hyuck Yang and Kang Yong Lee*, Hygrothermal cracking
analysis of plastic IC package,
Journal of Electronic Packaging, 2005, 127(2), pp. 164-171.
118 Geun Woo Kim and Kang Yong Lee*, Improving the reliability
of a plastic IC package in the
reflow soldering process by DOE, Soldering & Surface Mount
Technology, 2005, 17(1), pp. 40-
48.
119 C.Y. Dong* and Kang Yong Lee, Numerical analysis of doubly
periodic array of cracks/rigid-line
inclusions in an infinite isotropic medium using the boundary
integral equation method,
International Journal of Fracture, 2005, 133(4), pp.
389-405.
120 W.Q. Chen, Kang Yong Lee* and H.J. Ding, On free vibration
of non-homogeneous transversely
isotropic magneto-electro-elastic plates. Journal of Sound and
Vibration, 2005, 279(1-2), pp. 237-
251.
121 W.Q. Chen and Kang Yong Lee*, State-space approach for
statics and dynamics of angle-ply
laminated cylindrical panels in cylindrical bending,
International Journal of Mechanical Sciences,
2005, 47(3), pp. 374-387.
122 Geun Woo Kim and Kang Yong Lee*, Applying material
optimization to fracture mechanics
analysis to improve the reliability of the plastic IC package in
reflow soldering process, IEEE
Transactions on Components and Packaging Technologies, 2006,
29(1), pp. 47-53.
123 Byung Hwa Park and Kang Yong Lee*, Bogie frame design in
consideration of fatigue strength
and weight reduction, Proceedings of the Institution of
Mechanical Engineers Part F-Journal of
Rail and Rapid Transit, 2006, 220(3), pp. 201-206.
124 C.Y. Dong* and Kang Yong Lee, Boundary element
implementation of doubly periodic inclusion
problems, Engineering Analysis with Boundary Elements, 2006,
30(8), pp. 662-670.
125 Young Woo Park, T. S. N. Sankara Narayanan, Kang Yong Lee*,
Effect of fretting amplitude and
frequency on the fretting corrosion behaviour of tin plated
contacts, Surface & Coatings
Technology, 2006, 201(6), pp. 2181-2192.
126 Young Woo Park, T. S. N. Sankara Narayanan, Kang Yong Lee*,
Fretting wear behavior of tin
plated contacts: Influence on contact resistance, Surface Review
and Letters, 2006, 13(5), pp. 635-
644.
127 Byung Hwa Park, Nam Po Kim, Jung Seok Kim, Kang Yong Lee*,
Optimum design of tilting
bogie frame in consideration of fatigue strength and weight,
Vehicle System Dynamics, 2006.
-
44(12), pp. 887-901.
128 Young Woo Park, Jin Pyo Jung, Kang Yong Lee*, Overview of
fretting corrosion in electrical
connectors, International Journal of Automotive Technology,
2006, 7(1), pp. 75-82.
129 W. Q. Chen, Jin Pyo Jung and Kang Yong Lee*, Static and
dynamic behavior of simply-supported
cross-ply laminated piezoelectric cylindrical panels with
imperfect bonding, Composite Structures,
2006, 74(3), pp. 265-276.
130 Xian-Fang Li and Kang Yong Lee*, Transient response of a
semi-infinite piezoelectric layer with a
surface permeable crack, Zeitschrift Fur Angewandte Mathematik
Und Physik, 2006, 57(4), pp.
636-651.
131 Yong-Dong Li, Kang Yong Lee*, An anti-plane crack
perpendicular to the weak/micro-
discontinuous interface in a bi-FGM structure with exponential
and linear non-homogeneities,
International Journal of Fracture, 2007, 146(4), pp.
203-211.
132 Xian Fang Li*, Kang Yong Lee, Dynamic crack-opening
displacement of a mode III edge crack in
a semi-infinite piezoceramic strip under electric excitation,
Proceedings of the Institution of
Mechanical Engineers Part C-Journal of Mechanical Engineering
Science, 2007, 221(9), pp. 1009-
1017.
133 Young Woo Park, T. S. N. Sankara Narayanan, Kang Yong Lee*,
Effect of temperature on the
fretting corrosion of tin plated copper alloy contacts, Wear,
2007, 262(3-4), pp. 320-330.
134 Xiang-Fang Li* and Kang Yong Lee, Elastic response of a
piezoelectric ceramic plate with two
penny-shaped electrodes at the opposite surfaces under an
electric load, Journal of Intelligent
Material Systems and Structures, 2007, 18(7), pp. 743-751.
135 Young Woo Park, T. S. N. Sankara Narayanan, Kang Yong Lee*,
Fretting corrosion of tin-plated
contacts: Evaluation of surface characteristics, Tribology
International, 2007, 40(3), pp. 548-559.
136 T. S. N. Sankara Narayanan, Young Woo Park, Kang Yong Lee*,
Fretting-corrosion mapping of
tin-plated copper alloy contacts, Wear, 2007, 262(1-2), pp.
228-233.
137 Geun Woo Kim and Kang Yong Lee*, Influence of weak
interfaces on buckling of orthotropic
rectangular laminates, Composite Structures, 2007, 81(3), pp.
427-431.
138 She-Xu Zhao, Kang Yong Lee*, Interfacial crack problem in
layered soft ferromagnetic materials
in uniform magnetic field, Mechanics Research Communications,
2007, 34(1), pp. 19-30.
139 She-Xu Zhao, Kang Yong Lee*, Layered soft ferromagnetic
materials with moving interfacial
crack in uniform magnetic field, International Journal of
Applied Electromagnetics and Mechanics,
2007, 26(1-2), pp. 69-85.
140 She Xu Zhao, Kang Yong Lee*, Moving interfacial crack
between two dissimilar soft
ferromagnetic materials in uniform magnetic field, Journal of
Mechanical Science and
Technology, 2007, 21(5), pp. 745-754.
-
141 Geun Woo Kim and Kang Yong Lee*, Optimization of orthotropic
rectangular laminates with
weak interfaces under buckling, Composites Part a-Applied
Science and Manufacturing, 2007,
38(2), pp. 265-271.
142 Young Woo Park, G. N. K Ramesh Bapu, Kang Yong Lee*, Studies
of tin coated brass contacts in
fretting conditions under different normal loads and
frequencies, Surface & Coatings Technology,
2007, 201, pp. 7939-7951.
143 Yong-Dong Li and Kang Yong Lee*, Anti-plane crack
intersecting the interface in a bonded smart structure with graded
magnetoelectroelastic properties, Theoretical and Applied Fracture
Mechanics, 2008, 50(3), pp. 235-242.
144 Hang Rae Kim, Young Woo Park and Kang Yong Lee*, Application
of grey relational analysis to
determine welding parameters for Nd : YAG laser GMA hybrid
welding of aluminium alloy,
Science and Technology of Welding and Joining, 2008, 13(4), pp.
312-317.
145 Young Woo Park, Kang Yong Lee*, Development of empirical
equations for fretting-corrosion
failure-time of tin-plated contacts, Wear, 2008, 265(5-6), pp.
756-762.
146 Yong-Dong Li, Kang Yong Lee* and Yao Dai, Dynamic stress
intensity factors of two collinear
mode-III cracks perpendicular to and on the two sides of a
bi-FGM weak-discontinuous interface,
European Journal of Mechanics a-Solids, 2008, 27(5), pp.
808-823.
147 Da-quan Zhang, Qi-rui Cai, Li-xin Gao, Kang Yong Lee*,
Effect of serine, threonine and glutamic
acid on the corrosion of copper in aerated hydrochloric acid
solution, Corrosion Science, 2008,
50(12), p. 3615-3621.
148 Olcay Ersel Canyurt*, Hang Rae Kim, Kang Yong Lee,
Estimation of laser hybrid welded joint
strength by using genetic algorithm approach, Mechanics of
Materials, 2008, 40(10), pp. 825-831.
149 T. S. N. Sankara Narayanan, Young Woo Park, Kang Yong Lee*,
Evaluation of the performance
of electroless Ni-B coated brass contacts under fretting
conditions, Surface Review and Letters,
2008, 15(4), pp. 443-452.
150 Hyeong Do Kweon, Jong Sung Kim, Kang Yong Lee*, Fatigue
design of nuclear class 1 piping
considering thermal stratification, Nuclear Engineering and
Design, 2008, 238(6), pp. 1265-1274.
151 Yong-Dong Li, Kang Yong Lee*, Fracture analysis and improved
design for a symmetrically
bonded smart structure with linearly non-homogeneous
magnetoelectroelastic properties,
Engineering Fracture Mechanics, 2008, 75(10), pp. 3161-3172.
152 Yong-Dong Li, Kang Yong Lee*, Fracture analysis in
micropolar elasticity: anti-plane crack,
International Journal of Fracture, 2008, 152(2), pp.
163-168.
153 Yong-Dong Li, Kang Yong Lee*, Fracture analysis of a
weak-discontinuous interface in a
symmetrical functionally gradient composite strip loaded by
anti-plane impact, Archive of Applied
Mechanics, 2008, 78(11), pp. 855-866.
-
154 Young Woo Park, G.N.K. Ramesh Bapu and Kang Yong Lee*,
Fretting corrosion characteristics
of electrodeposited and hot dipped tin coating contacts, Surface
& Coatings Technology, 2008,
202(14), pp. 3164-3174.
155 T. S. N. Sankara Narayanan, Young Woo Park, Kang Yong Lee*,
Fretting corrosion of lubricated
tin-plated contacts, Industrial Lubrication and Tribology, 2008,
60(5), pp. 233-241.
156 T. S. N. Sankara Narayanan, Young Woo Park, Kang Yong Lee*,
Fretting corrosion of lubricated
tin plated copper alloy contacts: Effect of temperature,
Tribology International, 2008, 41, pp. 87-
102.
157 Young Woo Park, T. S. N. Sankara Narayanan, Kang Yong Lee*,
Fretting corrosion of tin-plated
contacts, Tribology International, 2008, 41(7), pp. 616-628.
158 Geun Woo Kim and Kang Yong Lee*, Influence of weak
interfaces on buckling of orthotropic
piezoelectric rectangular laminates, Composite Structures, 2008,
82, pp. 290-294.
159 Da-quan Zhang, Hyung Goun Joo, Kang Yong Lee*, Investigation
of molybdate-benzotriazole
surface treatment against copper tarnishing, Surface and
Interface Analysis, 2009, 41(3), pp. 164-
169.
160 Yong-Dong Li, Hong-Cai Zhang, Wei Tan, Kang Yong Lee*,
Mechanical modeling and fracture
analysis for a non-homogeneous weldment with a crack
perpendicular to the interface,
International Journal of Solids and Structures, 2008, 45(22-23),
pp. 5730-5743.
161 C.Y. Dong* and Kang Yong Lee, Stress analysis of plastic IC
package containing various interface
delaminations using the boundary element method, Engineering
Fracture Mechanics, 2008, 75(1),
pp. 1-16.
162 Yong-Dong Li, Wei Tan, Kang Yong Lee*, Stress intensity
factor of an anti-plane crack parallel to
the weak/micro-discontinuous interface in a bi-FGM composite,
Acta Mechanica Solida Sinica,
2008, 21(1), pp. 34-43.
163 C. Y. Song, Young Woo Park, Hang Rae Kim, Kang Yong Lee*, J.
Lee, The use of Taguchi and
approximation methods to optimize the laser hybrid welding of a
5052-H32 aluminium alloy plate,
Proceedings of the Institution of Mechanical Engineers Part
B-Journal of Engineering
Manufacture, 2008, 222(4), pp. 507-518.
164 Da-quan Zhang, Li-xin Gao, Guo-ding Zhou and Kang Yong Lee*,
Undecyl substitution in
imidazole and its action on corrosion inhibition of copper in
aerated acidic chloride media, Journal
of Applied Electrochemistry, 2008, 38(1), pp. 71-76.
165 Hang Rae Kim, Kang Yong Lee*, Using the orthogonal array
with grey relational analysis to
optimize the laser hybrid welding of a 6061-T6 Al alloy sheet,
Proceedings of the Institution of
Mechanical Engineers Part B-Journal of Engineering Manufacture,
2008, 222(8), pp. 981-987.
166 Y. Huang, Xiang-Fang Li*, Kang Yong Lee, Interfacial shear
horizontal (SH) waves propagating
-
in a two-phase piezoelectric/piezomagnetic structure with an
imperfect interface, Philosophical
Magazine Letters, 2009, 89(2), pp. 95-103.
167 Xian-Ci Zhong, Xian-Fang Li* and Kang Yong Lee, Analysis of
a mode-I crack perpendicular to
an imperfect interface, International Journal of Solids and
Structures, 2009, 46(6), pp. 1456-1463.
168 Yong-Dong Li, Kang Yong Lee*, Anti-plane fracture analysis
for the weak-discontinuous
interface in a non-homogeneous piezoelectric bi-material
structure, European Journal of
Mechanics a-Solids, 2009, 28(2), pp. 241-247.
169 Hang Rae Kim, Kang Yong Lee*, Application of Taguchi method
to determine hybrid welding
conditions of aluminum alloy, Journal of Scientific &
Industrial Research, 2009, 68(4), pp. 296-
300.
170 Y.J. Xie*, Kang Yong Lee*, X.Z. Hu and Y.M. Cai,
Applications of conservation integral to
indentation with a rigid punch, Engineering Fracture Mechanics,
2009, 76(7), pp. 949-957.
171 Xian-Fang Li* and Kang Yong Lee, Closed-form solution for an
orthotropic elastic strip with a
crack perpendicular to the edges under arbitrary anti-plane
shear, Zamm-Zeitschrift Fur
Angewandte Mathematik Und Mechanik, 2009, 89(5), pp.
370-382.
172 Da-quan Zhang, Young Woo Park, Kang Yong Lee*, Corrosion
Behaviors of ND: YAG Laser-
GMA Hybrid Weldment of AA5052-H32 Al Alloys, Surface Review and
Letters, 2009, 16(1), pp.
43-47.
173 Da-Quan Zhang, Jin Li, Hyung Goun Joo and Kang Yong Lee*,
Corrosion properties of Nd:YAG
laser-GMA hybrid welded AA6061 Al alloy and its microstructure,
Corrosion Science, 2009,
51(6), pp. 1399-1404.
174 Yong-Dong Li, Kang Yong Lee*, Crack tip shielding and
anti-shielding effects of the imperfect
interface in a layered piezoelectric sensor, International
Journal of Solids and Structures, 2009,
46(7-8), pp. 1736-1742.
175 Yong-Dong Li, Kang Yong Lee*, Dynamic responses of a crack
in a layered graded
magnetoelectroelastic sensor subjected to harmonic waves, Acta
Mechanica, 2009, 204(3-4), pp.
217-234.
176 Yong-Dong Li, Kang Yong Lee*, Nan Zhang, Dynamic stress
intensity factor of a crack
perpendicular to the weak-discontinuous interface in a
nonhomogeneous coating-substrate
structure, Archive of Applied Mechanics, 2009, 79(2), pp.
175-187.
177 Young Woo Park, Hyung Goun Joo and Kang Yong Lee*, Effect of
intermittent fretting on
corrosion behavior in electrical contact, Wear, 2010, 268(3-4),
pp. 353-360
178 Yong-Dong Li, Kang Yong Lee*, Effects of the
weak/micro-discontinuity of interface on the
fracture behavior of a functionally graded coating with an
inclined crack, Archive of Applied
Mechanics, 2009, 79(9), pp. 779-791.
-
179 Young Woo Park, G.N.K. Ramesh Bapu, Kang Yong Lee*,
Evaluation of surface characteristics
under fretting of electrical contacts: Removal behaviour of hot
dipped tin coating, Applied Surface
Science, 2009, 255(8), pp. 4434-4442.
180 Yong-Dong Li, Kang Yong Lee*, Fracture analysis in
micropolar elasticity: mode-I crack,
International Journal of Fracture, 2009, 156(2), pp.
179-184.
181 Yong-Dong Li, Kang Yong Lee*, Nan Zhang, Fracture analysis
on a piezoelectric sensor with a
viscoelastic interface, European Journal of Mechanics a-Solids,
2009, 28(4), pp. 738-743.
182 Yong-dong Li, Kang Yong Lee*, Fracture analysis on the
arc-shaped interface in a layered
cylindrical piezoelectric sensor polarized along its axis,
Engineering Fracture Mechanics, 2009,
76(13), pp. 2065-2073.
183 Da-Quan Zhang, Li-Xin gao, Qi-Rui Cai, Kang Yong Lee*,
Inhibition of copper corrosion by
modifying cysteine self-assembled film with alkylamine/alkylacid
compounds, Materials and
Corrosion, 2009, 60(1), pp. 16-21.
184 Yong-Dong Li, Kang Yong Lee*, Interaction between an
electrically permeable crack and the
imperfect interface in a functionally graded piezoelectric
sensor, International Journal of
Engineering Science, 2009, 47(3), pp. 363-371.
185 Xu-Long Peng, Xian-Fang Li* and Kang Yong Lee, Interface
crack problem of functionally
graded piezoelectric materials: effects of the position of
electromechanical impact and gradient,
Acta Mechanica, 2009, 207(1-2), pp. 69-82.
186 Yong-Dong Li, Kang Yong Lee*, Interfacial fracture analysis
of a graded piezoelectric layer on a
substrate with finite dimension, Archive of Applied Mechanics,
2009, 80(9), pp. 1007-1016.
187 Xian-Fang Li, Guang-Lian Lin, Kang Yong Lee*,
Magnetoelectroelastic field induced by a crack
terminating at the interface of a bi-magnetoelectric material,
Philosophical Magazine, 2009, 89(5),
pp. 449-463.
188 Yong-Dong Li, Kang Yong Lee*, Mechanical modeling and
transient anti-plane fracture analysis
for the graded inter-diffusion regions in a bonded structure,
Meccanica, 2009, 44(4), pp. 389-408.
189 Xian-Fang Li*, Bao-Lin Wang, Kang Yong Lee, Size effects of
the bending stiffness of nanowires,
Journal of Applied Physics, 2009, 105(7), pp. 074306-074311.
190 Young Woo Park, G.N.K. Ramesh Bapu, Kang Yong Lee*, The
influence of current load on
fretting of electrical contacts, Tribology International, 2009,
42(5), pp. 682-689.
191 Yong-Dong Li, Kang Yong Lee*, The shielding effect of the
imperfect interface on a mode III
permeable crack in a layered piezoelectric sensor, Engineering
Fracture Mechanics, 2009, 76(7),
pp. 876-883.
192 Xian-Ci Zhong, Xian-Fang Li* and Kang Yong Lee, Transient
response of a cracked
magnetoelectric material under the action of in-plane sudden
impacts, Computational Materials
-
Science, 2009, 45(4), pp. 905-911.
193 Yong-Dong Li and Kang Yong Lee*, Magnetostrictive fracture
of a cylindrical multiferroic
composite, International Journal of Engineering Science, 2010,
48(2), pp. 199-208.
194 Yong-Dong Li, Kang Yong Lee*, Effects of finite dimension on
the electro-elastic responses of an
interface electrode in a piezoelectric actuator, ZAMM - Journal
of Applied Mathematics and
Mechanics, 2009, 90(1), pp. 42-52.
195 Yong-Dong Li, Kang Yong Lee*, Anti-plane shear fracture of
the interface in a cylindrical smart
structure with functionally graded magnetoelectroelastic
properties, International Journal of Solids
and Structures, Acta Mechanica, 2009, 212(1-2), pp. 139-149.
196 Yong-Dong Li, Hong-Cai Zhang, Kang Yong Lee*, Fracture
analysis for a non-homogeneous
weldment with a crack parallel to the interface, Indian Journal
of Engineering & Materials
Sciences, 2009, 16(1), pp. 295-300.
197 Kang Yong Lee*, Dae Ki Jeong, Hyung Goun Joo, Young Woo
Park, Simulation for Fretting
Corrosion of tin-coated Copper Contacts, Materials and
Corrosion, 2011, 62(4), pp. 352-356
198 Yong-Dong Li, Nan Zhang, Kang Yong Lee*, Effect of a finite
interface on the electrode in a non-
homogeneous piezoelectric structure, Smart Materials and
Structures, 2009, 18(12), pp. 125028.
199 Yong-Dong Li and Kang Yong Lee*, Effects of magneto-electric
loadings and
piezomagnetic/piezoelectric stiffening on multiferroic interface
fracture, Engineering Fracture
Mechanics, 2010, 77(5), pp. 856-866.
200 Xian-Fang Li, Xu-Long. Peng, Kang Yong Lee*, The static
response of functionally graded
radially polarized piezoelectric spherical shells as sensors and
actuators, Smart Materials and
Structures, 2010, 19(3), pp. 035010.
201 Hong-Xing Wei, Yong-Dong Li and Kang Yong Lee*, Interfacial
fracture analysis of a
semicircular cylindrical guide rail#, Mechanics Based Design of
Structures and Machines, 2010,
38(2), pp. 190-203.
202 Xian-Fang Li, Xu-Long Peng, Kang Yong Lee*, Radially
polarized functionally graded
piezoelectric hollow cylinders as sensors and actuators,
European Journal of Mechanics A/Solids,
2010, 29(4), pp. 704-713.
203 Yong-Dong Li, Kang Yong Lee*, Effect of an imperfect
interface on the SH wave propagating in a
cylindrical piezoelectric sensor, Ultrasonic, 2010, 50(4-5), pp.
473-478.
204 Ilkwang Jang and Kang Yong Lee*, Application of robust
prediction for a laserGMA hybrid
welding process and parameter optimization of 6061-T6 aluminium
alloy, Proceedings of the
Institution of Mechanical Engineers, Part B: Journal of
Engineering Manufacture, 2010, 224(11),
pp. 1671-1678.
205 Yong Dong Li and Kang Yong Lee*, Two collinear unequal
cracks in a poled piezoelectric plane:
-
Mode I case solved by a new approach of real fundamental
solutions, International Journal of
Fracture, 2010, 165(1), pp. 47-60.
206 Yong Dong Li and Kang Yong Lee*, Collinear unequal crack
series in magnetoelectroelastic
materials: Mode I case solved via new real fundamental
solutions, Engineering Fracture
Mechanics, 2010, 77(14), pp. 2772-2790.
207 Yong Dong Li and Kang Yong Lee*, Size-dependent behavior of
love wave propagation in a
nanocoating, Modern Physics Letters B, 2010, 24(31), pp.
3015-3023.
208 Yong Dong Li, Nan Zhang and Kang Yong Lee*, Fracture
analysis on the arc-shaped interfacial
crack between a homogeneous cylinder and its coating, European
Journal of Mechanics - A/Solids,
2010, 29(5), pp. 794-800.
209 Zhi-Wen Gao, You-He Zhou and Kang Yong Lee*, The interaction
of two collinear cracks in a
rectangular superconductor slab under an electromagnetic force,
Physica C: Superconductivity,
2010, 470(15-16), pp. 654-658.
210 Yue-Ting Zhou, Jin Li, De-Hao Yu, and Kang Yong Lee*,
Numerical solution of hypersingular
equation using recursive wavelet on invariant set, Applied
Mathematics and Computation, 2010,
217(2), pp. 861-868.
211 Zhi-Wen Gao, You-He Zhou and Kang Yong Lee*, Crack-inclusion
problem for a long
rectangular slab of superconductor under an electromagnetic
force, Computational Materials
Science, 2010, 50(2), pp. 279-282.
212 Yue-Ting Zhou, Xing Li, De-Hao Yu and Kang Yong Lee*,
Coupled crack/contact analysis for
composite material containing periodic cracks under periodic
rigid punches action, Computer
Modeling in Engineering & Sciences, 2010, 63(2),
pp.163-190.
213 Xian-Fang Li, Guang-Lian Liu and Kang Yong Lee*, Effects of
T-stresses on fracture initiation
for a closed crack in compression with frictional crack faces,
International Journal of Fracture,
2009, 160(1), pp. 19-30.
214 Yong-Dong Li, Fei-Xiang Feng and Kang Yong Lee*, Mode I
fracture analysis of a piezoelectric
strip based on real fundamental solutions, European Journal of
Mechanics A/Solids, 2011, 30(2),
pp. 158-166.
215 Zhi-Wen Gao, You-He Zhou and Kang Yong Lee*, Graded finite
element simulation of thermal
stress in inhomogeneous high-Tc superconductor, Physica C:
Superconductivity, 2010, 470(22),
pp. 2010-2015.
216 Yong-Dong Li, Kang Yong Lee* and Fei-Xiang Feng, Interface
edge crack in a multiferroic
semicylinder, Meccanica, 2010, 46(6), pp. 1393-1399.
217 Zhi-Wen Gao, Kang Yong Lee*, You-He Zhou, Peeling stress
analysis for an inhomogeneous
high-Tc superconductor with a discontinuous interface at the
substrate, Physica C:
-
Superconductivity, 2011, 471(3-4), pp. 55-61.
218 Yong-Dong Li, Kang Yong Lee*, Fei-Xiang Feng,
Magnetostrictive/electrostrictive fracture of the
piezomagnetic and piezoelectric layers in a multiferroic
composite: Anti-plane case, International
Journal of Solids and Structures, 2011, 48(9), pp.
1311-1317.
219 Yue Ting Zhou, Kang Yong Lee*, Thermo-electro-mechanical
contact behavior of a finite
piezoelectric layer under a sliding punch with frictional heat
generation, Journal of the Mechanics
and Physics of Solids, 2011, 59(5), pp. 1037-1061.
220 Yong-Dong Li, Kang Yong Lee*, Jing-Wen Pan, Collinear
unequal crack series in
magnetoelectroelastic materials: Anti-plane case, ZAMM -
Zeitschrift fuer Angewandte
Mathematik und Mechanik, 2011, 91(9), pp. 743-752.
221 Da-Quan Zhang, Bin Xie, Li-Xin Gao, Hyung Goun Joo, Kang
Yong Lee*, Inhibition of copper
corrosion in acidic chloride solution by methionine combined
with cetrimonium
bromide/cetylpyridinium bromide, Journal of Applied
Electrochemistry, 2011, 41(5), pp.491-498.
222 Fei-Xiang Feng, Kang Yong Lee*, Yong-Dong Li, Multiple
cracks on the interface between a
piezoelectric layer and an orthotropic substrate, Acta
Mechanica, 2011, 211(3-4), pp. 297-308.
223 Da Quan Zhang*, Xing Jin, Bin Xie, Hyung Goun Joo, Li Xin
Gao, Kang Yong Lee*, Corrosion
inhibition of ammonium molybdate for AA6061 alloy in NaCl
solution and its synergistic effect
with calcium gluconate, Surface and Interface Analysis, 2012,
44(1), pp. 78-83
224 Da Quan Zhang*, Pei-Hui Liu, Li Xin Gao, Hyung Goun Joo,
Kang Yong Lee, Photosensitive
self-assembled membrane of cysteine against copper corrosion,
Materials Letters, 2011, 65(11),
pp. 1636-1638.
225 Feng Fei-Xiang, Kang Yong Lee*, Yong-Dong Li, Multiple
cracks on the arc-shaped interface in a
semi-cylindrical magneto-electro-elastic composite with an
orthotropic substrate, Engineering
Fracture Mechanics, 2011, 78(9), pp. 2029-2041.
226 Yue Ting Zhou, Kang Yong Lee*, De Hao Yu, Transient heat
conduction in a functionally graded
strip in contact with well stirred fluid with an outside heat
source, The International Journal of
Heat and Mass Transfer, 2011, 54(25-26), pp. 5438-5443.
227 Yue Ting Zhou, Kang Yong Lee*, New, real fundamental
solutions to the transient thermal contact
problem in a piezoelectric strip under the coupling actions of a
rigid punch and a convective heat
supply, International Journal of Solids and Structures,
International Journal of Solids and
Structures, 2011, 48(19), pp. 2706-2717.
228 Xian-Ci Zhong, Kang Yong Lee*, A dielectric crack in a
functionally graded piezoelectric layer,
European Journal of Mechanics, A/Solids, 2011, 30(6), pp.
761-769.
229 Kang Yong Lee*, Dae Ki Jeong, Jae Hyung Kim, Simulational
study of electrical contact
degradation under fretting corrosion, Tribology International,
2011, 44(12), pp. 1651-1658.
-
230 Zhi-Wen Gao, Kang Yong Lee*, You-He Zhou, Coupled
thermo-mechanical analysis of
functionally gradient weak/micro-discontinuous interface with
graded finite element method, Acta
Mechanica Solida Sinica, Vol 25, Issue 4, August 2012,
pp.331-341
231 J. Shen, J-X Wu, J. Song, X-F. Li*, Kang Yong Lee, Flexural
waves of carbon nanotubes based on
generalized gradient elasticity, Physica Status Solidi(b), 2012,
249(1), pp. 50-57
232 Y.J.Xie*, X.Z.Hu, J. Chen, Kang Yong Lee, Micro-indentation
fracture from flat-ended cylindrical
indenter, Fatigue & Fracture of Engineering Materials &
Structures , 2012, 35(1), pp. 45-55
233 Y.J. Xie*, X.Z. Hu, X.H. Wang, J. Chen, K.Y. Lee, A
theoretical note on mode-I crack branching
and kinking, Engineering Fracture Mechanics, 2011, 78(6) pp.
919-929.
234 Zhengqiang Zhu, Kang Yong Lee*, Xiaolong Wang, Ultrasonic
Welding of Dissimilar Metals,
AA6061 and Ti6Al4V, International Journal of Advanced
Manufacturing Technology, 2012, 59(5-
8), pp. 569-574
235 Yong-Dong Li, Kang Yong Lee*, Nan Zhang, A generalized
hypergeometric function method for
axisymmetric vibration analysis of a piezoelectric actuator,
European Journal of Mechanics A-
Solids, 2012, 31(1), pp. 110-116.
236 Xian-Fang Li, Bao-Lin Wang, Kang Yong Lee*, Size Effect in
transverse mechanical behavior of
one-dimensional nanostructure, Physica E, 2011, 44(1), pp.
207-214.
237 Yue-Ting Zhou, Kang Yong Lee*, Thermal response of a
partially insulated interface crack in a
graded coating-substrate structure under thermo-mechanical
disturbance: Energy release and
density, Theoretical and Applied Fracture Mechanics, 2011,
56(1), pp. 22-33
238 Xian-Ci Zhong, Kang Yong Lee*, Dielectric crack problem for
a magnetoelectroelastic strip with
functionally graded properties, Archive of Applied Mechanics,
2012, 82(6), pp. 791-807
239 Yue Ting Zhou, Kang Yong Lee*, Exact two-dimensional contact
analysis of piezomagnetic
materials indented by a rigid sliding punch, Journal of Applied
Mechanics, 2012, 79(4), p. 041011
240 Zhi-Wen Gao, Kang Yong Lee*,You-He Zhou, Crack tip shielding
and anti-shielding effects of
parallel cracks for a superconductor slab under an
electromagnetic force, Journal of Mechanical
Science and Technology, 2012, 26(2), pp. 353-357
241 Xian-Fang Li*, Tang, G.-J., Shen, Z.-B., Kang Yong Lee,
Vibration of nonclassical shear beams
with Winkler-Pasternak-type restraint, Acta Mechanica, 2012,
223(5), pp. 953-966
242 Yue-Ting Zhou, Kang Yong Lee*, Theory of moving contact of
anisotropic piezoelectric materials
via real fundamental solutions approach, European Journal of
Mechanics - A/Solids, 2012, 35, pp.
2236
243 Yue-Ting Zhou, Kang Yong Lee*, Exact solutions of a new, 2D
frictionless contact model for
orthotropic piezoelectric materials indented by a rigid sliding
punch, Philosophical Magazine,
2012, 92(15), pp.1937-1965
-
244 Yong-Dong Li, Kang Yong Lee*, Three dimensional axisymmetric
problem in piezoelectric
media: Revisited by a real fundamental solutions based new
method, Applied Mathematical
Modelling, 2012, 36(12), pp. 61006113
245 Xina-Fang Li*, Kang Yong Lee, Gao-Jin Tang, Kink angle and
fracture load for an angled crack
subjected to far-field compressive loading, Engineering Fracture
Mechanics, 2012, 82, pp. 172-184
246 Yue-Ting Zhou, Kang Yong Lee*, Frictional contact of
anisotropic piezoelectric materials
indented by flat and semi-parabolic stamps, Archive of Applied
Mechanics, 2013, 83(1), pp.73-95
247 Xian-Ci Zhong, Kang Yong Lee*, A thermal-medium crack model,
Mechanics of Materials, 2012,
51, pp. 110117
248 Yue-Ting Zhou, Kang Yong Lee*, Xing Li, Transient response
of a functionally graded strip with
heat convection supply from the well stirred fluid with heat
sink, Heat transfer Engineering, 2013,
34(7), pp.617-628
249 Yue-Ting Zhou, Kang Yong Lee*, Yong Hoon Jang, Explicit
solution of the frictional contact
problem of anisotropic materials indented by a moving stamp with
a triangular or parabolic profile,
Zeitschrift fuer Angewandte Mathematik und Physik (ZAMP), June
2013, vol.64.Issue 3, pp.831-
861
250 Da Quan Zhang, Tao Liu, Hyung Goun Joo, Li Xin Gao, Kang
Yong Lee*, Microstructure and
corrosion resistance of the brazed WC composite coatings in
aerated acidic chloride media,
International Journal of Refractory Metals and Hard Materials,
2012, 35, pp. 246-250
251 Yue-Ting Zhou, Kang Yong Lee*, Exact solutions of the 2-D
frictional sliding contact problem of
electrically insulated triangular and cylindrical punches on
piezoelectric materials, ZAMM,
Vol.93,NO.4, 217-232(2013)
252 Yue-Ting Zhou, Kang Yong Lee*, Effects of the moving speed
of a rigid stamp on contact
behaviors of anisotropic materials based on real fundamental
solutions, Meccanica, April 2013,
Vol. 48, Issue 3, pp.739-752.
253 Yue-Ting Zhou, Kang Yong Lee*, Contact problem for
magneto-electro-elastic half-plane
materials indented by a moving punch. Part I: Closed-form
solutions, International Journal of
Solids and Structures, 2012, 49(26), pp. 3853-3865
254 Yue-Ting Zhou, Kang Yong Lee*, Contact problem for
magneto-electro-elastic half-plane
materials indented by a moving punch. Part II: Numerical
results, International Journal of Solids
and Structures, 2012, 49(26), pp. 3866-3882
255 Yue-Ting Zhou, Kang Yong Lee*, Theory of sliding contact for
multiferroic materials indented by
a rigid punch, International Journal of Mechanical Sciences,
vol.66, January 2013, 156-167.
256 Yue-Ting Zhou, Kang Yong Lee*, Yong Hoon Jang , Influence of
the moving velocity and
material property on frictionless contact problem of orthotropic
materials indented by a moving
-
punch, Archives of Mechanics, vol.65 No.3, pp. 195-217,
2013.
257 Yue-Ting Zhou, Kang Yong Lee*, Dynamic behavior of a moving
frictional punch over the
surface of anisotropic materials, Applied mathematical Modeling,
38 (2014) 2311-2327
258 Yue-Ting Zhou, Kang Yong Lee*, Investigation of frictional
sliding contact problems of triangular
and cylindrical punches on monoclinic piezoelectric materials,
Mechanics of Materials,
vol.69(2014) 237-250
259 Y. T. Zhou, K. Y. Lee*, Y. H. Jang, Indentation theory on
orthotropic materials subjected to a
frictional moving punch, Archives of Mechanics, Vol. 66, No. 2,
pp.71-94, 2014
260 X.-C. Zhong, K.-Y. Lee*, Electroelastic fields induced by
two collinear and energetically
consistent cracks in a piezoelectric layer, Journal of
Mechanics, Vol. 30, Issue 4, 2014, pp.361-372
261 Hyung Goun Joo, Kang Yong Lee*, Effect of boron on wear and
erosion of WC-Ni vacuum
brazed coating, International Journal of Materials Research,
Vol. 105, No. 8, 2014, pp.802-809
262 L. X. Gao, T. Zhou, D. Q. Zhang*, K. Y. Lee, Microstructure
and anodic dissolution mechanism of
brazed WC-Ni composite coating, Corrosion Engineering, Science
and Technology, Vol. 49, No.
3, 204-208, 2014
263 Xian-Fang Li*, Hua Zhang, Kang Yong Lee, Dependence of
Young's modulus of nanowires on
surface effect, International Journal of Mechanical Sciences,
2014, 81, pp.120-125
264 Hyung Goun Joo, Da Quan Zhang, Li Xin Gao, Tao Liu, Kang
Yong Lee*, Corrosion resistance of
tungsten carbide-based cermet coatings formed by sinter-brazing,
International Journal of Surface
Science and Engineering, Vol. 8, No. 4, 2014, pp.380-391
265 Xian-Fang Li*, Guo-Jin Tang, Zhi-Bin Shen, Kang Yong Lee,
Resonance frequency and mass
identification of zeptogram-scale nanosensor based on the
nonlocal beam theory, Ultrasonics, Vol.
55, 2015, pp.7584
266 A.-Y. Tang, J.-X. Wu, X.-F. Li*, K.-Y. Lee, Exact frequency
equations of free vibration of
exponentially non-uniform functionally graded Timoshenko beams,
International Journal of
Mechanical Sciences, Vol. 89, 2014, pp.1-11
267 Xian-Fang Li*, Kang Yong Lee, Exact analysis for free
vibration of exponentially non-uniform
functionally graded Timoshenko beams, Applied Mathematical
Modelling, submitted
268 Yue-Ting Zhou, Kang Yong Lee*, Real fundamental solutions
approach to double surface contact
problem of an orthotropic layer subjected to two rigid punches,
Applied Mathematics and
Computation, submitted
269 Xian-Fang Li*, Kang Yong Lee, Flapwise bending vibration of
rotating tapered Rayleigh
cantilever beams, Journal of Vibration and Control,
submitted
270 Xian-Fang Li, Guo-Jin Tang, Zhi-Bin Shen, Kang Yong Lee*,
Resonant frequencies of
longitudinal free vibration of a nonlocal Love bar carrying a
nanoparticle, Applied Mathematical
-
Modelling, submitted
271 Jae Hyung Kim, Hyung Goun Joo, Kang Yong Lee*, Simulation of
solid particle erosion in WC-
Ni coated wall using CFD, Journal of Materials processing
Technology, 224(2015) 240-245
272 Wencong Shi, Xian-Fang Li*, Kang Yong Lee, Transverse
vibration of free-free beams carrying
two unequal end mass, International Journal of Mechanical
Sciences, 90 (2015) 251-257
273 P. Chu, X.-F. Li*, Z.-G. Wang, K.Y. Lee, Double cantilever
beam model for functionally graded
materials based on two-dimensional theory of elasticity,
Engineering Fracture Mechanics, 135
(2015) 232-244
274 Xian-Fang Li, Kang Yong Lee*, Effect of horizontal reaction
force on the deflection of short
simply supported beams under transverse loading, International
Journal of Material Sciences, 99
(2015) 121-129
275 Xian-Fang Li, Guo-Jin Tang, Zhi-Bin Shen, Kang Yong Lee*,
Axisymmetric problems of a
penny-shaped crack at the interface of a bi-material under shear
and compression., International
Journal of Solids and Structures, 69-70 (2015) 403-414
276 A.-Y. Tang, X.-F. Li*, J.-X. Wu, K.Y. Lee, Flapwise bending
vibration of rotating tapered
Rayleigh cantilever beams, Journal of Constructional Steel
Research, 112 (2015), 1-9
277 Xian-Fang Li*, Guo-Jin Tang, Zhi-Bin Shen*, Kang Yong Lee,
Stress intensity factors for
external circular crack at the interface of a bi-material in
shear-compression, International Journal
of Solids and Structures, 64-65 (2015) 221-231
278 P. Chu, X.-F. Li*, J.-X. Wu, K.Y. Lee, Two dimensional
elasticity solution of elastic strips and
beams made of fuctionally graded materials under tension and
bending, Acta Mech 226 (2015)
2235-2253
279 Wencong Shi, X.-F. Li*, K.Y. Lee, Transvers vibration of
free-free beams carrying two equal end
masses, International Journal of Mechanical Sciences, 90 (2015)
251-257
280 P. Chu, X.-F. Li*, Z.-G. Wang, K.Y. Lee, Double cantilever
beam models for fuctionally graded
materials based on two dimensional theory of elasticity,
Engineering Fracture Mechanics, 135
(2015) 232-244
281 Xian-Fang Li*, Guo-Jin Tang, Zhi-Bin Shen*, Kang Yong Lee,
Interface crack embedded in a
bi-material plane under shear and compression, Mechanics of
Materials, 85 (2015) 80-93
282 Xian-Fang Li, Kang Yong Lee*, Effect of heat conduction of
penny-shaped crack interior on
thermal stress intensity factor, International Journal of Heat
and Mass Transfer, 91 (2015) 127-134
283 DaPeng Wang, DaQuan Zhang*, Kang Yong Lee, LiXin Gao,
Performance of AA5052 alloy
anode in alkaline ethylene glycol electrolyte with dicarboxylic
acids additives for aluminum-air
batteries, Journal of Power Sources, 297 (2015) 464-471
-
5. Proceedings papers
* : Corresponding Author
1 S. H. Advani*, Kang Yong Lee, H. F. Wang and Y. T. Lin
Fracture mechanics and stress analysis associated with underground
coal gasification 18th Proceedings of the Symposium on Rock
Mechanics, 1974, Keystone, CO, USA.
2 Kang Yong Lee and S. H. Advani* Stress and displacement
response of porous-permeable media under thermo-mechanical leading
Proceedings 19th U.S. Symposium Rock Mechanics, 1978, Reno, Nevada,
USA.
3 S. H. Advani* and Kang Yong Lee Thermo-mechanical failure
criterion for rock media 20th Proceedings of the Symposium on Rock
Mechanics, 1979, Austin, Tex, USA.
4 Kang Yong Lee* and Taek Sung Lee Fatigue Limite of Crack
Initiation and Propagation at Notched Plates 2nd Conference of
Asian-Pacific Congress on Strength Evaluation, 1986, Seoul,
Korea.
5
Kang Yong Lee* Cyclic AE Count Rate and Crack Growth Rate under
Low Cycle Fatigue Fracture Loading International Symposium on
Pressure Vessel Technology and Nuclear Codes & Standards, 1989,
Seoul, Korea.
6
Kang Yong Lee* Cyclic Acoustic Emission Count Rate and Crack
Growth Rate under Low Cycle Fatigue Loading Asian-Pacific Congress
on Strength Evaluation-89, 1989, Japan.
7 Kang Yong Lee* and Youn Ho Cho Boundary Element Analysis of
Thermal Stress Intensity Factors for Cusp Cracks KSME/JSME joint
conference on Fracture and Strength '90, 1990, Seoul, Korea.
8 Kang Yong Lee* and Jeong Soo Park J-integral and Fracture Time
under Thermal Shock Loading 6th International Pacific Conference on
Automotive Engineering, 1991, Seoul, Korea.
9 Kang Yong Lee* and Tae Ik Son AE Characteristics on
interlamina fracture of Thermoplastic composite material" The Joint
JSME/KSME Conference on Recent Process in Fracture Mechanics, 1993,
Japan.
10 Hyung Jip Choi, Tae Eun Jin and Kang Yong Lee* Effects of
Cladding on the Subsurface Crack in a Layered Half-space Asian
Pacific Conference on Fracture & Strength, 1993, Tsuchiura,
Japan.
-
11
Sung Ho Kim, Kang Yong Lee* and Moon Bok Park Mode I stress
intensity factors for cracked layered material under arbitrary
crack surface loadingFar East Fracture Group International
Symposium on Fracture and Strength of Solids, 1994, Xian, China
12
Tae Eun Jin, Hyung Jip Choi and kang Yong Lee* On collinear
cracks in a layered medium with a nonhomogeneous interfacial region
Far East Fracture Group International Symposium on Fracture and
Strength of Solids, 1994, Xian, China.
13
Tae Eun Jin, Hyung Jip Choi and Kang Yong Lee* "Thermal shock
response of collinear cracks in a layered half-plane with a
nonhomogeneous interfacial zone" The first international symposium
on thermal stresses and related topics, Thermal Stresses '95, 1995,
Japan.
14 Kang Yong Lee* and Taek Sung Lee "Hygrothermal fracture
analysis of plastic IC package in reflow soldering process" Asian
Pacific Conference for Fracture and strength '96, 1996, Kyongju,
Korea.
15
Jong-Sung Kim, Seung-Gun Lee, Tae-Eun Jin and Kang-Yong Lee* "
Prediction of PWSCC Growth Rate for Alloy 600 by Artificial Neural
Network" 15th International Conference on Structural Mechanics in
Reactor Technology, 1999, Seoul, Korea.
16 Ji Hyuck Yang and Kang Yong Lee* "Cracking Analysis of
Plastic IC Package in Consideration of Viscoelasticity" The 3rd
Electronics Packaging Technology Conference, 2000, Singapore.
17 Young Woo Park, Hang Rae Kim, Jin Hong Zhu, Kang Yong Lee*
"Weldability and Formalibity in Laser-Hybrid Welding of Al alloys"
International Institute of Wleding International Congress, 2008,
Chennai, India.
18
Jinhong Zhu, Hongxin Shi, Kaitong Lu, Kang Yong Lee* "Study on
IGBT inverter power supply for Co2 arc welding and embedded ARM
based waveform control" Proceedings of the 2007 IEEE International
Conference on Mechatronics and Automation, 2007, Harbin, China.
19 Jinhong Zhu, Shughong Song, Kang Yong Lee* "Investigation on
control Strategies of pulse-GMAW process" The 3rd IEEE Conference
on Industrial Electronics and Applications, 2008, Singapore.
20 Hyung Goun Joo, Da-Quen Zhang, Dae Young Lee, Jae Uk Jung,
Kang Yong Lee* "Control and application of corrosion inhibitors for
anti-tarnishing of copper" 15th Asian Pacific Corrosion Control
Conference, 2009, Manila, Philippine.
-
21 Ilkwang Jang, Jae Hyung Kim, Kang Yong Lee* "Multi-objective
optimization of drilling process parameters" World Academy of
Science, Engineering and Technology(WASET) 2010, Bali,
Indonesia.
22
Da-Quen Zhang, X Jin, Hyung Goun Joo, L X Gao, Kang Yong Lee*
Corrosion behavior of AA6061-T6 Alloy in the ethylene glycol-water
solution 3rd International Conference for Heterogeneous Materials
Mechanics(ICHMM), 2011, Shanghai City, China
23
Jae Hyung Kim, Kang Yong Lee* CFD analysis of erosion in power
plant for the prediction of local wall thinned area 11th
International Conference on Fluid Control, Measurements and
Visualization(FLUCOME 2011), 2011, Keelung, Taiwan
24
Hyung Goun Joo, Kang Yong Lee*, Da Quan Zhang "Corrosion
characteristics of WC-Ni cermet brazing coatings by vacuum
sintering" The 6th Interdisciplinarity in Engineering International
Conference(inter-eng 2012), 2012, Romania
25
Jae Hyung Kim, Hyung Goun Joo, Kang Yong Lee*, Simulation of
solid particle erosion in WC-Ni coated wall using CFD, Global
Engineering, Science and Technology Conference , Global Institution
of Science and Technology, 1-2 April, 2013, Novotel World Trade
Centre, Dubai, UAE (Selected as the best paper)
26 Young-Ho Lee, Hyung-Kyu Kim*, Kang Yong Lee, Fretting war
behavior of an elastically supported rod under unlubricated
conditions, 7th International Symposium on Fretting Fatigue,
Oxford, 8th -11th , April 2013.
27
Hao Zhao, Tao Xiong, Yong-Dong Li*, Kang Yong Lee, Physical
mechanisms of magnetostriction or electrostrction induced
interfacial fracture in a bi-layered multiferroic smart composite.
(Keynote presented by YD Li), 13th International Conference on
Fracture, June 16-21, 2013, Beijing, China.
28 D.Q. Zhang.*, T.F. Xia, L. Zhang, L.X. Gao, K.Y. Lee,
Corrosion behavior and oxide film formation of T91 steel under the
different cycle water chemistry operation conditions, 19th
International Corrosion Conference in Jeju Island, November 2-6,
South Korea (Keynote Speech)
5. Books
1 Kang Yong Lee, Stress Analysis and Mechanical Behaviors of
materials (in Korean), Yonsei University Press, 2003. awarded by
Ministry of Culture and Tourism in South Korea
-
2 Kang Yong Lee, Introduction to Linear Fracture Mechanics (in
Korean), DongMyungSa, 1993.
3 Kang Yong Lee and Hideaki Takahashi, Fracture and Strength
'90, Trans Tech Publications, 1991.
4 Kang Yong Lee, Mechanical Behavior of materials (in Korean),
Yonsei University Press, 1999.
5 Kang Yong Lee at al , Automobile Technology Handbook (Test
& Evaluation, in Korean), Korean Society of Automobile
Engineers 1996.
6 Kang Yong Lee, Stress Analysis (in Korean), MunUnDang,
1998.
7 Y.Z.Chen, N.Hasebe, K.Y.Lee, Multiple Crack Problems in
Elasticity, WIT press, ISBN : 1-85312-903-8, 2003
8 Zainual Huda, Robert Bulpett, and Kang Yong Lee, Design
against Fracture and Failure, Trans Tech Publications, 2010
6. Computer Programs Registered in South Korea
1 No.2001-01-120-002227, Kang Yong Lee, Signal pattern
recognition program, April 6, 2001
2 No.2001-01-120-002228, Kang Yong Lee, BEM(Boundary Element
Method) Program, April 6, 2001
3 No.2007-01-122-004128, Kang Yong Lee, AE signal analysis,
August 6, 2007
7. Patents Registered in South Korea
1 Kang Yong Lee, Woochul Kim, Nanostructured welding method for
reducing deformation, Korea
Patent Registration Number(Date) : 100878447000(January 7,
2009)
2 Kang Yong Lee, Young Woo Park, Si Chul Jang, fretting tester,
Korea Patent Registration
Number(Date) : 1009194340000(September 22, 2009)
3
Woochul Kim, Kang Yong Lee, Yong Hoon Jang, Soldering material
for increasing durability of
soldering zone and soldering method using the same, Korea Patent
Registration Number(Date) :
1009041960000(June 16, 2009)
8. Teaching Courses (1) Undergraduate Program at Yonsei
University, Seoul, South Korea
-
Mechanical Behaviors of Materials
Solid Mechanics
Introduction to Elasticity
Fracture
Fatigue
(2) Undergraduate Program at Dalian University of Technology,
China
Advanced Material Mechanics (2credits) (in English)
Fracture and Damage Mechanics (2credits) (in English)
Teaching Evaluation by Class Students
Autumn 2012-2013 Advanced Material Mechanics
index full score your score
passion 10 9.71
intellectual clarity 10 9.65
linking theory with practice 10 9.65
make the focal points stand out 10 9.71
heuristic 10 9.65
tailoring teaching 10 9.71
homework correcting 10 9.71
application of modern technology 10 9.71
curiosity stimulating 10 9.71
enthusiasm to the students 10 9.71
total 100 96.88
Spring 2012-2013 Fracture and damage mechanics
index full score your score
passion 10 9.95
intellectual clarity 10 9.85
linking theory with practice 10 9.9
make the focal points stand out 10 9.85
heuristic 10 9.9
tailoring teaching 10 9.9
homework correcting 10 9.85
application of modern technology 10 9.95
curiosity stimulating 10 9.95
-
enthusiasm to the students 10 9.9
total 100 98.97
Autumn 2013-2014 Advanced Material Mechanics
index full score your score
passion 10 9.81
intellectual clarity 10 9.77
linking theory with practice 10 9.73
make the focal points stand out 10 9.77
heuristic 10 9.81
tailoring teaching 10 9.77
homework correcting 10 9.81
application of modern technology 10 9.81
curiosity stimulating 10 9.81
enthusiasm to the students 10 9.85
total 100 97.92
(3) Graduate Program at Yonsei University, Seoul, South
Korea
Linear Elastic Fracture Mechanics
Elastic Plastic Fracture Mechanics
Advanced Mechanical Behaviors of Materials
9. Some samples of projects of company fundings
1 Economic hardness for selection by acoustic emission method
for minimum wear in elevator sheave, Hyundai Elevator Co., LTD.
2 Shape determination by acoustic emission method for minimum
wear in tapered roller bearing, Han Gook Machinery Co. LTD
3 Detection of drill failure by acoustic emission method,
Hyundai-Kia Motors
4 Measurement and simulation of fatigue life of engine mounting
rubber, Hyundai-Kia Motors
5 Test of mechanical properties of engineering plastics, Samsung
Electronics
6 Classification of detects of rotary compressor by acoustic
emission signal pattern recognition method, Samsung Electronics
-
7 Test of fatigue properties of free oxygen cupper, LG
Electronics
8 Measurement of TV mask frame deflection in welding, LG
Electronics
9 Failure analysis of worm shaft, Nawootec Co., LTD
10 Development of acoustic emission monitoring system in
resistance spot welding, Nawootec Co., LTD
11 Measurement of bending failure strength of steel in low
temperature, Agency for Defence Development
12 IC package cracking analysis, Samsung Electronics
13 Intelligence package development for ultrasonic signal
pattern recognition and its application to classification of
welding defects in austenitic stainless steel, Korea Electrical
Engineering & Science Research Institute
14 Welding fatigue test of high strength steel, Agency for
Defence Development
15 Body jointing in electric automobile, Korea Automotive
Technology Institute
16 Stress analysis and life evaluation of nozzle in nuclear
power vessel, KEPCO Engineering & Construction Company,
Inc.
17 Contact stress analysis of wheel and rail, Korea Institute of
Machinery & Materials
18 Stress analysis of turbine case, Korea Research Institute of
Standards and Science
19 Strength testing of body joining in electric automobile, GM
Korea Company
20 Prevention of thermal stress and crack occurrence in cooling
process of API-K55 steel, POSCO
21 Test of fatigue properties of tailored blanking sheet, Korea
Automotive Technology Institute
22 Acoustic emission system development for performance
evaluation of drill cutter, Hyundai-Kia Motors
23 Fretting corrosion analysis of electric connector, Korea
Institute of S&T Evaluation and Planning
24 Development of insert tip drill for high strength steel, Bo
Kyung Tool Co.
25 Laser-GMA hybrid welding in aluminium alloy, KISWEL Co.,
LTD
26 Material selection and structural integrity for car battery
connection component, Chang Hwan Precision Terminal Co., LTD
27 Protection from surface corrosion of free oxygen cupper,
DH-Metal Co.
28 Characterization and analysis of corrosion inhibition film
formed on cupper and hybrid welding aluminium alloy, Korea-China
Joint Research Program in National Research Foundation of Korea
29 Study of durability improvement for quality of oil flushing
equipment, Seoul Development Institute
30 Life extension of boiler tube and components by WC cladding,
Korea Institute of Energy Technology Evaluation and Planning