1 894415005 Chih-Chuan Cheng The Network Simulation NS-2 NIST add-on IEEE 802.16 model (MAC+PHY)

1

894415005 Chih-Chuan Cheng

The Network Simulation NS-2 NIST add-on

IEEE 802.16 model (MAC+PHY)

2

Outline Background

Fixed WMAN+Mobile WMAN 802.16 Deployment Inside WiMax: Coverage Transmission Parameters in MAC Messages

Contention Resolution NIST: IEEE 802.16 model (MAC+PHY)

MAC module structure MAC PDU format Bandwidth Allocation and Request

Mechanisms Parameters Statistics

3

Fixed WMAN+Mobile WMAN

Rural

industrial

SOHO

PTP backhaul

BS

BS

First/Last Mile

Civic& Business Building802.16-2004

802.16e

Point to Multipoint

Global Network

4

802.16 Deployment

5~15% ~18% ~39% ~28%

64QAM

16QAM

QPSK

BPSK

Effective channel

capacity at

maximum range

=3.8Mbps

2.0km 3.0km 4.4km 5.2km

Inside WiMax: Coverage

6

Transmission Parameters in MAC Messages

7

Contention Resolution Collisions may occur during Initial

Ranging and Request intervals defined by their respective IEs

The BS controls assignments on the uplink channel through the UL-MAP messages and determines collisions

An SS can have multiple uplink service flows (each with its own CID), contention resolution is done on a per CID basis.

In the UCD message: Request Backoff Start / End (for BW Request) Ranging Backoff Start / End (for Initial

Ranging)

8

Contention Resolution Algorithm

Contention resolution is based on a truncated binary exponential backoff The initial backoff window and maximum backoff

window controlled by the BS These values are as part of the UCD message

and power-of-two. E.g. 4 for (0,15) window; 10 for (0,1023)

The SS shall randomly select a number of contention within its backoff window

The random value is the number of contention transmission opportunities that the SS shall defer before transmitting

After a contention transmission, the SS waits for a Data Grant Burst Type IE in a subsequent map (or waits for a RNG-RSP message for initial ranging).

Once received, the contention resolution is complete

9

Contention Resolution Algorithm

The SS shall consider the contention transmission lost if no data grant has been given within T16 ( or T3 for initial ranging). T16:10ms(min), QoS(max);T3:200ms The SS shall increase its backoff window by a

factor of two, as long as it is less than the maximum backoff window.

Retry limits: Request Retries for BWR; Contention Ranging Retries for initial ranging.

Retry limit is independent of initial and maximum backoff windows that defined by the BS

10

Example of Contention Resolution

Assume that Three SS (SS1,SS2 and SS3) compete to send BW Request The Broadcast Request IE = 2 transmission opportunities

(the Broadcast Request IE is part of UL-MAP determined by BS)

The initial backoff window is 0 to 15 The random values for each SS are: 2 (SS1), 3 (SS2) and 5

(SS3)

11

Contention Resolution

12

MAC module structure~ns2/wimax/mac802_16(/BS/SS).h

13

MAC PDU format

~ns2/wimax/mac802_16pkt.h

14

Bandwidth Allocation and Request Mechanisms

~ns2/wimax/scheduling/contentionslot.h

15

Bandwidth Allocation and Request Mechanisms

~ns2/wimax/scheduling/contentionrequest.h

16

Parameters

/ns2.31/tcl/lib/ns-wimax.tcl Mac/802_16 set rng_backoff_start_ 2

Mac/802_16 set rng_backoff_stop_ 6 Mac/802_16 set bw_backoff_start_ 2 Mac/802_16 set bw_backoff_stop_ 6

Mac/802_16 set contention_rng_retry_ 16 Mac/802_16 set request_retry_ 2 ;#16

17

Statistic

Some statistics are collected at the MAC sublayer. The following command is used to display their values during the simulation.

-Mac/802.16 set print_stats_ true

18

Bandwidth Request (SstoBS and BstoSS)WimaxTimer

start()stop()pause()resume()

WimaxBackoffTimerhandle()pause()resume()

ContentionRequestexpire()starttimeout()pause()resume()

BwRequestexpire()getCID()

ContentionSlotgetBackoff_start()getBackoff_stop()getSize()setBackoff_start()setBackoff_stop()setSize()resumeTimer()pauseTimer()

BwContentionSlotaddRequest()removeRequest()removeRequests()getRequest()resumeTimer()pauseTimer()