© Andra FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY IAEA – 26/09/2012 Jean de Mèredieu Risk management division / Post closure safety departement Intrusion scenarios in radwaste repositories DMR/SAF/12-0018 26/09/2012
Jan 04, 2016
DMR/SAF/12-0018 © Andra FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY IAEA – 26/09/2012
Jean de MèredieuRisk management division / Post closure safety departement
Intrusion scenarios in radwaste repositories
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
1 – The French classification of radwaste and Andra’s sites locations
2 – Highlighting a few topics : French national guidance, safety case and safety functions, time-frames, contamination routes and depth parameter.
3 – Intrusion scenarios in Andra’s safety assessments
4 – Possible uses of intrusion scenarios results
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Waste classification and management channels
26/09/2012
Short-lived Long-lived
Very Low Level
Low LevelStudies in progress with
repository project
Intermediate level
High level
Morvilliers VLL surface repository
Surface disposals Aube repository : operational,
Manche Centre : in monitoring phase
30 December 1991 Waste Act
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Andra’s sites locations
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
French national guidance issued by ASN (Nuclear Safety Autority)LIL-SL Surface facilities
RFS-I.2 (November 8th 1982, updated June 19th 1984) : safety objectives and design bases of surface facilities for the long term disposal of SL and/or IL radioactive waste of low specific activity,
HIL-LL Deep geological repository Safety GuideGuide de Sûreté 2008 (formerly RFS-III.2.f) : objectives to be retained in the siting and study phases for the long term disposal of HL and IL-LL waste in deep geological formations in order to ensure safety after the operational phase of the repository.
LL-LL Intermediate depth repository Safety GuideGeneral safety guidance 2008 : guidances in the prospect of siting for a LL-LL repository.
Guidance 1/2
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Elements are given as regards : the types of intrusion scenarios that have to be analysed :
for the surface facilities : road works within the repository footprint, residential area with permanent inhabitants on the site, “playground” scenario in the residential area.for the deep repository : the case of a drilling assumed to hit the repository has to be addressed.
the timeframe for a possible intrusion : 300 years after closure in case of the CSFMA surface disposal. 500 years after closure for the deep geological repository.
Regulatory Guidance let Andra free to describe the intrusion scenarios to be assessed with respect to the safety objectives.
Guidance 2/2
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Normal Evolution Scenario
Impact in normal operation (indicators) Impact of incidental / accidental scenarios
( indicators)
Impact of normal and altered scenarios (indicators)
Waste package characteristics
Incidental /accidental situations
Normal operation
Operational safety / risk analsyis (RA)Post closure safety/analysis of uncertainties
(QSA)
Technological knowledge
Site Characteristic
s
Framework and Safety Strategy
Functional analysis (FA)
Altered Evolution Scenarios
Description / design of repository components
Regulatory framework/reference guidance
Scientific knowledge
Compliance of the safety level with the objectives (function of the stage of the project development)
Strategy - Context
Data input – Assessment basis
Operational Post closure
Human intrusion within the safety assessment
Position of the intrusion scenarios in the safety case
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Safety functions Repository safety functions are defined in order to meet the main fundamental objective : “protect humans and the environment from the dispersion of radionuclides”.
After closure all function are safety functions, they must be fullfiled without any human intervention (“passive function”).
Main after closure functions are (illustration) :
Isolate the waste from human beings activities
Prevent the circulation of water in the repository
Limit the release of radionuclides and toxic chemicals and immobilise them in the repository
Delay and reduce the migration of radionuclides released outside of the repository disposal cells.
As regards human intrusion, the point is “How far the achievement of each safety functions could be degraded by an intrusion event hitting one or more components ?”
Safety functions
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Time-frames
Multiple timeframes have to be considered :Radionuclides decay, and possibly appearance through radioactive chainsWaste source-term (packages duration, waste matrix release ...)Geo-prospective aspects (uplifts, erosion processes, climate …)Institutional control and record keeping which define the earliest possible date for intrusion. Duration of the assessment (up to 1 My in the case of deep repository)
(déchets vitrifiés)HL Waste radiological activity evolution over time
Typical activity for a vitrified waste canister
26/09/2012
1,00E+09
1,00E+10
1,00E+11
1,00E+12
1,00E+13
1 10 100 1000 10000 100000 1000000
Ac
tivit
é (
Bq
)
Temps (ans)
Evolution de l'activité des hydroxydes du CEA sur 1 000 000 années et contribution des principaux radionucléides
Totale
U238
Ra226
U235
Th232
Radium bearing waste
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Two routes for contaminationAir pathway
External irradiation through direct contact or vicinity with the waste.Internal irradiation through ingestion and inhalation of contaminated dust or inhalation of radioactive gases (Radon).Sources : cuttings from drilling, road works, houses construction. Main contributors : alpha decay radionuclides, radon ...
Water pathwayThrough drinking water, livestock watering or irrigation : due to borehole drilling likely to shortcut the geological layers or engineered barriers.Main contributors : mobile beta-gamma decay radionuclides e.g. Cl-36, I-129 … Water pathways assessment needs are different : especially in terms of hydrogeological and transport modeling tools.
Possible routes for contamination
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
The depth parameter
26/09/2012
Intrusion types•Water wells drilling•Road works•Houses construction•Mining
Timeframes•Radionuclides decay rate•Possible site erosion site stability•Source term (packages duration, waste matrix release ...)•Institutional control duration Waste content
•Radionuclides activity and decay rate•Matrix form - primary package•Mobility and sorption of radionuclides•Toxic compounds content
Site and repository design•Host formation with suitable properties (hydraulic conductivity ...)•No valuable resources in the subsoil•Cells design / Dead end design •Depth : Surface / Near surface or intermediate / DeepPathways of contamination
•Air path (ingestion and inhalation)•Water path (drinking water and other uses) Depth of repository
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Intrusion scenarios definitionTypes of intrusion
Exploratory drilling passing trough the repository and continuing till the under-laying aquifer is reached (assumed target).Cores are brought to surface.The drilling is supposed abandoned without any plugging and keeps open.
Time framesDirect impact to the driller : 500 years (loss of repository memory).Indirect consequences to the repository performances : continuous evaluation starting at 500 years.Assumption that all waste packages can be drilled.
Locations of the hitting points in the repository, number of drillingsIL waste tunnel, IL waste package, HL waste package, HL access tunnel ...One or two drillings at a time.
Consideration is also given to potential indirect consequences of the drilling on other human groups.The fact of drilling a water well into a contaminated plume outside the repository footprint may rather be considered in the normal evolution scenario, except if the contamination is the consequence of an intrusion.
Intrusion scenarios for the deep geological repository 1/2
26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
The 2009 architecture
26/09/2012
Intrusion scenarios for the deep geological repository 2/2
Non thermal HL waste area
ThermalHL waste area
HL waste sub-zone
Slope access
HL waste cell
Main accesses
Division module
IL wastetunnel
IL waste Sub-zone
IL waste area
Division module
Shafts
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Types of scenariosRelated with a route of contamination trough the air :
Road works,Residence building on site,Playground scenario.
Related with a route of contamination trough ground water :A water well is dug within the repository footprint.
Intrusion scenarios for the near-surface disposals
Outlet
Source
Disposal area
Draining formatio
n
Impermeable layer
Water
table
CSFMA scheme
26/09/2012
The intrusion is assumed to take place at the moment and location of maximum impact for each radionuclide.
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra
Use of intrusion scenarios
Even assumed that : an “non-interesting” site in terms of geological or surface resources has been chosen, the quantity of valuable material in the repository has been limited as far as possible; and future actions likely to make location and design records available as long as possible have been promoted,
Intrusion risk can’t be excluded.
Then the main purpose of the analysis is to make sure that an intrusion would not alter the safety functions in a way that would bring impact to an unacceptable level. In addition, intrusion scenarios may be used as a mean to improve and optimize the design in terms of robustness.
If impact is slightly higher than acceptable :Define waste activity limits (total Bq or specific activity Bq/g) in order to achieve the protection goal (link with Waste Acceptance Criteria)Bring improvements to the repository design or possibly to the cell filing procedures in order to avoid “hot spots” (link with the design process)Improve the knowledge in order to reduce the calculation margins due to uncertainties (link with science and experiments)
In any case, feedback is provided for the next safety assessment iteration:Identify the aspects that deserve improvement,Evaluate the interest of a better waste caracterisation and classification (if possible) in order to direct some of the waste categories towards better adapted facilities. 26/09/2012
FRENCH RADIOACTIVE WASTE MANAGEMENT AGENCY© AndraDMR/SAF/12-0018 © Andra 26/09/2012