Visar 650 Technical Data Sheet - Transynergy · Maximum welding rates Minimum energy consumption Minimum weight Maximum efficiency Visar 650 Stud welding unit For ARC stud welding
Post on 16-Jul-2020
7 Views
Preview:
Transcript
Visar 650 Technical Data Sheet
Subsidiary HBS Studwelding Inc., USA www.hbs-studwelding.com Head Office HBS Bolzenschweiss- Felix-Wankel-Strasse 18 85221 Dachau / Germany Systeme GmbH & Co. KG Phone +49 8131 511-0 Fax +49 8131 511-100
Inverter-Capacitor Charging Technology Maximum welding rates Minimum energy consumption Minimum weight Maximum efficiency
Visar 650
Stud welding unit For ARC stud welding (short cycle drawn arc welding (BH 10), drawn arc welding (BH 100)) according to current standards
Technical Data
Welding range BH 100: dia. 14 ga to 5/16” (dia. 2 to 8 mm), #4 to 3/8” (M3 to M10) (type RD) BH 10: dia. 14 ga to 1/4” (dia. 2 to 6 mm), #4 to 1/4” (M3 to M6)
Welding material Mild steel, stainless steel
Welding rate M3 = 40 studs/min M8 = 12 studs/min
Welding current 650 A (max.)
Stromeinstellbereich 100 to 650 A
Welding time 5 to 200 ms (stepless)
Primary power 100 to 240 V, 1 phase, 50/60 Hz, 16 AT
Primary plug 2-pin grounded safety plug
Connected load 3 kVA
Cooling type F (temperature controlled cooling fan)
IP Code IP 44
Dimension L x W x H 18.66“ x 13.27“ x 13.82“ (474 x 337 x 351 mm) with handle
Weight 39.68 lbs (18 kg)
Suitable stud welding gun A 12, welding cable length 15.91’ (4.8 m) (not possible to extend), (not included in delivery)
Order No 93-66-0650 (Visar 650) 93-40-020 (Ground cable) 93-20-270 (A 12 – Stud welding gun) 93-40-022 (PSC-1 – Ceramic leg assembly) 88-24-466 (Toolbag)
Issue 11/16 (Technical data may change)
1-PHASE INSTEAD OF A 3-PHASEPOWER CONNECTION!
VISAR 650
100 - 240 V / 650 A / DIA. 2 - 8 MM
THE VISAR 650: A NEW DIMENSION OF POWER!
LOADED WITH ENERGY
This machine provides 3x more in output power than it draws from the grid
1-phase instead of 3-phase voltage supply (100 - 240 V)
Variable input, unaffected by voltage variationsorfluctuations
Specially regulated welding energy providing quality welds
SIMPLE
Intuitive operation
Handy toolbag (optional)
Cable tidy system provided via the handle
ROBUST
Enclosed housing (no air vents)
Protection against dirt, water, dust, knocks
Protection class IP 44
Side panels provide a raised base
Solid base
MOBILE
Small/compact
Light weight (18 kg)
No need for expensive heavy 3-phase supply cables
Mobile power stud welder (650 A)
POWERFUL LIGHTWEIGHT:
THE VISAR 650 FROM HBS – COMPLETELY NEW TO STUD WELDING!
Experience a previously unknown dimension
in power and mobility! HBS is ringing in the
future with 1-phase power connection ARC
stud welding with its „Visar 650“, a global
product innovation from the Quasar device
series.
Handy toolbag (optional).Can be attached to the side, offering storage and speedy access to accessories such as chuck, tripod, bending device, welding gun, etc.
Intuitive, easy to operate. Thanks to the backlighting on the knobs, simple to use in low lighting conditions.
HBS stud welding guns specially paired with the machine for outstanding results.
Presented with the Red Dot DesignAward in 2015, one of the most prestigious design competitions, which is considered to be the yard-stick for the highest design quality at international level. This seal of qualityconfirmstheinnovativedesign excellence of HBS.
ANY QUESTIONS ABOUT THE VISAR 650?
If you would like more information about the
Visar 650 please contact our sales team.
Thank you!
WWW.VISAR650.COM
HBS Bolzenschweiss-Systeme GmbH & Co. KGFelix-Wankel-Strasse 1885221 Dachau I Germany
WEB | E-MAIL
www.hbs-info.compost@hbs-info.com
PHONE | FAX
+49 8131 511-0+49 8131 511-100
top related