TIÊU CHUẨN MỚI THÁNG 10/2016 - lib.iuh.edu.vnlib.iuh.edu.vn/wp-content/uploads/2017/06/Bantin_Tieuchuan_10_2016.pdf · 1 trƯỜng Đh cÔng nghiỆp tp. hỒ chÍ minh trung
Post on 02-Sep-2019
2 Views
Preview:
Transcript
1
TRƯỜNG ĐH CÔNG NGHIỆP TP. HỒ CHÍ MINH
TRUNG TÂM THÔNG TIN – THƯ VIỆN
TIÊU CHUẨN MỚI THÁNG 10/2016
TIÊU CHUẨN QUỐC GIA (TCVN) ....................................................................... 2
Chất lượng nước .............................................................................................................. 2
Chất lượng đất ................................................................................................................. 2
Hóa chất ....................................................................................................................... 3
Cao su và chất dẻo ........................................................................................................... 3
Dầu mỏ .......................................................................................................................... 4
Luyện kim – Sản phẩm kim loại ....................................................................................... 4
Đo lường và phép đo, hiện tượng vật lý ............................................................................. 5
Xã hội học, dịch vụ, tổ chức, quản lý và chất lượng công ty ................................................ 6
Giao thông – Vận tải – Tàu thủy ........................................................................................ 6
An toàn – môi trường ....................................................................................................... 6
Nông nghiệp .................................................................................................................. 7
Vấn đề chung, thuật ngữ, tiêu chuẩn hóa tư liệu ................................................................. 7
Khai thác mỏ và khoáng sản ............................................................................................. 8
Xây dựng – Vật liệu xây dựng ............................................................................................ 9
Hệ thống và bộ phận thủy lực ......................................................................................... 10
TIÊU CHUẨN NƯỚC NGOÀI .............................................................................. 10
Công nghệ thông tin ........................................................................................................ 10
Điện – Điện tử- Thiết bị điện .......................................................................................... 11
Giao thông – Vận tải – Tàu thủy .................................................................................... 14
Cơ khí – Chế tạo .......................................................................................................... 15
Luyện kim – Sản phẩm kim loại ...................................................................................... 16
Xây dựng – Vật liệu xây dựng ........................................................................................... 19
Đo lường và phép đo, hiện tượng vật lý ............................................................................ 19
Chất dẻo – Cao su ......................................................................................................... 21
Dầu mỏ ........................................................................................................................ 22
Y tế - Chăm sóc sức khỏe .............................................................................................. 22
Xã hội học, dịch vụ, tổ chức, quản lý và chất lượng công ty ............................................... 23
Vấn đề chung, thuật ngữ, tiêu chuẩn hóa tư liệu ................................................................ 24
An toàn – môi trường ...................................................................................................... 24
Thử nghiệm .................................................................................................................... 25
2
TT Số hiệu tiêu chuẩn Tên tiêu chuẩn A4
TIÊU CHUẨN QUỐC GIA (TCVN)
Chất lượng nước Trở về đầu trang
1
TCVN 10806-1:2015 Chất lượng nước. Xác định độc tính gây chết
cấp tính của các chất đối với cá nước ngọt
[brachydanio rerio hamilton-buchanan
(teleostei, cyprinidae)]. Phần 1: Phương pháp
tĩnh
16
2
TCVN 10806-2:2015 Chất lượng nước. Xác định độc tính gây chết
cấp tính của các chất đối với cá nước ngọt
[brachydanio rerio hamilton-buchanan
(teleostei, cyprinidae)]. Phần 3: Phương pháp
bán tĩnh
16
3
TCVN 10806-3:2015 Chất lượng nước. Xác định độc tính gây chết
cấp tính của các chất đối với cá nước ngọt
[brachydanio rerio hamilton-buchanan
(teleostei, cyprinidae)]. Phần 3: Phương pháp
dòng chảy
17
4 TCVN 10807-1:2015 Chất lượng nước. Xác định sự ức chế quá trình
tạo khí của vi khuẩn kỵ khí. Phần 1: Phép thử
chung
21
5 TCVN 10807-2:2015 Chất lượng nước. Xác định sự ức chế quá trình
tạo khí của vi khuẩn kỵ khí. Phần 2: Phép thử
đối với nồng độ sinh khối thấp
19
6 TCVN 6181-2:2015
Thay thế:TCVN 6090-1:2010
Chất lượng nước. Xác định xyanua. Phần 2:
Xác định xyanua dễ giải phóng
20
Chất lượng đất Trở về đầu trang
7 TCVN 10758-1:2016 Đo hoạt độ phóng xạ trong môi trường. Đất.
Phần 1: Hướng dẫn chung và định nghĩa
20
8 TCVN 10758-2:2016 Đo hoạt độ phóng xạ trong môi trường. Đất.
Phần 2: Hướng dẫn lựa chọn chiến lược lấy
mẫu, lấy mẫu và xử lý sơ bộ mẫu
34
9 TCVN 10758-3:2016 Đo hoạt độ phóng xạ trong môi trường. Đất.
Phần 3: Phương pháp thử các nhân phóng xạ
chất gamma bằng đo phổ gamma
29
10 TCVN 10758-4:2016 Đo hoạt độ phóng xạ trong môi trường. Đất.
Phần 4: Đo các đồng vị plutoni (pluton 238 và
plutoni 239+240) bằng phổ alpha
29
11 TCVN 10758-5:2016 Đo hoạt độ phóng xạ trong môi trường. Đất. 90
3
Phần 5: Đo stronti
12 TCVN 10758-6:2016 Đo hoạt độ phóng xạ trong môi trường. Đất.
Phần 6: Đo tổng hoạt độ alpha và tổng hoạt độ
beta
16
13
TCVN 10883:2016 Xác định dioxin và furan clo hóa từ tetra đến
octa trong đất và trong trầm tích bằng phương
pháp sắc ký khí. Khối phổ phân giải cao pha
loãng đồng vị
50
14
TCVN 11069-1:2015 Chất lượng đất. Xác định nitrat, nitrit và amoni
trong đất ẩm hiện trường bằng cách chiết với
dung dịch kali clorua. Phần 1: Phương pháp
thủ công
20
15
TCVN 11069-2:2015 Chất lượng đất. Xác định nitrat, nitrit và amoni
trong đất ẩm hiện trường bằng cách chiết với
dung dịch kali clorua. Phần 2: Phương pháp tự
động với phân tích dòng chảy phân đoạn
17
16 TCVN 11070:2015 Chất lượng đất. Xác định hàm lượng
hydrocacbon từ C10 đến C40 bằng sắc ký khí
23
17
TCVN 11071:2015 Chất lượng đất. Xác định biphenyl polyclo hóa
(PCB) bằng sắc ký khí detector chọn lọc khối
lượng (GC-MS) và sắc ký khí detector bẫy
electron (GC-ECD)
37
18 TCVN 11072:2015 Chất lượng đất. Xác định các phtalat được
chọn lọc bằng sắc ký khí mao quản detector
khối phổ (GC/MS)
27
19
TCVN 11073:2015 Chất lượng đất. Xác định dioxin và furan và
biphenyl polyclo hóa giống dioxin bằng sắc ký
khí detector chọn lọc khối lượng độ phân giải
cao (GC/HRMS)
43
Hóa chất Trở về đầu trang
20 TCVN 2090:2015
Thay thế:TCVN 2090:2007
Sơn, vecni và nguyên liệu cho sơn và vecni.
Lấy mẫu
19
21 TCVN 2091:2015
Thay thế:TCVN 2091:2008
Sơn, vecni và mực in. Xác định độ mịn 10
22 TCVN 2097:2015
Thay thế:TCVN 2097:1993
Sơn và vecni. Phép thử cắt ô 20
Cao su và chất dẻo Trở về đầu trang
23 TCVN 11021:2015 Hỗn hợp cao su thử nghiệm. Chuẩn bị, cán
luyện và lưu hóa. Thiết bị và quy trình
34
4
24 TCVN 6090-1:2015
Cao su chưa lưu hóa. Phương pháp sử dụng
nhớt kế đĩa trượt. Phần 1: Xác định độ nhớt
mooney
23
25 TCVN 6315:2015
Thay thế:TCVN 6315:2007
Latex cao su. Xác định tổng hàm lượng chất
rắn
13
26
TCVN 6323:2015
Thay thế: TCVN 6323:1997 và
sửa đổi 1:2008
Cao su và các loại latex. Ký hiệu và tên gọi 11
Dầu mỏ Trở về đầu trang
27 TCVN 11278:2015 Khí thiên nhiên hóa lỏng (LNG). Hệ thống
thiết bị và lắp đặt. Kho chứa LNG có sức chứa
đến 200 tấn
43
Luyện kim – Sản phẩm kim loại Trở về đầu trang
28
TCVN 11022-1:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
1: Lấy mẫu
11
29
TCVN 11022-2:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
2: Xác định sự phân bố cỡ hạt
9
30
TCVN 11022-3:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
3: Xác định khối lượng riêng biểu kiến
9
31
TCVN 11022-4:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
4: Đánh giá độ cứng bằng phép thử trượt kính
7
32
TCVN 11022-5:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
5: Xác định độ ẩm
8
33
TCVN 11022-6:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
phi kim dùng để phun làm sạch bề mặt. Phần
6: Xác định các tạp chất tan trong nước bằng
phép đo độ dẫn nhiệt
8
34 TCVN 11022-7:2015 Chuẩn bị nền thép trước khi phủ sơn và sản
phẩm liên quan. Phương pháp thử vật liệu mài
8
5
phi kim dùng để phun làm sạch bề mặt. Phần
7: Xác định clorua tan trong nước
Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang
35 ĐLVN 284:2015 Cân phân tích. Quy trình hiệu chuẩn 10
36 TCVN 10716:2015 Đo dòng chất lỏng trong kênh hở. Phương
pháp mặt cắt. Độ dốc
26
37 TCVN 10717:2015 Đo đạc thủy văn. Hiệu chuẩn đồng hồ đo dòng
trong bể hở hình trụ
22
38 TCVN 10718:2015 Cấu trúc đo dòng. Máng có dạng hình chữ
nhật, hình thang và hình chữ
91
39 TCVN 10719:2015 Đo đạc thủy văn. Đo dòng trong kênh hở sử
dụng các cấu trúc. Hướng dẫn lựa chọn cấu
trúc
18
40 TCVN 10720:2015 Đo dòng chất lỏng trong kênh hở. Máng
parshall và saniiri
34
41
TCVN 10721:2015 Đo dòng chất lỏng bằng thiết bị chênh áp.
Hướng dẫn về ảnh hưởng của sai lệch so với
yêu cầu kỹ thuật và điều kiện vận hành được
trình bày trong TCVN 8113 (ISO 5167)
45
42 TCVN 10722:2015 Đo vận tốc chất lỏng trong kênh hở. Thiết kế,
lựa chọn và sử dụng đồng hồ đo dòng kiểu
điện từ
17
43 TCVN 11082-1:2015 Dụng cụ thí nghiệm bằng thủy tinh - Tỷ trọng
kế cho mục đích sử dụng chung - Phần 1: Các
yêu cầu
43
44 TCVN 11082-1:2015 Dụng cụ thí nghiệm bằng thủy tinh - Tỷ trọng
kế cho mục đích sử dụng chung - Phần 1: Các
yêu cầu
19
45 TCVN 11082-2:2015 Dụng cụ thí nghiệm bằng thủy tinh - Tỷ trọng
kế cho mục đích sử dụng chung - Phần 2:
Phương pháp thử và sử dụng
19
46 TCVN 11084:2015 Dụng cụ thí nghiệm bằng thủy tinh. Bình lọc 14
47 TCVN 11085:2015 Dụng cụ thí nghiệm bằng chất dẻo. Ống đong
chia độ
18
48
TCVN 11111-1:2015 Âm học. Mức chuẩn zero để hiệu chuẩn thiết
bị đo thính lực. Phần 1: Mức áp suất âm
ngưỡng tương đương chuẩn đối với âm đơn và
tai nghe ốp tai
15
49 TCVN 11111-2:2015 Âm học. Mức chuẩn zero để hiệu chuẩn thiết
bị đo thính lực. Phần 2: Mức áp suất âm
11
6
ngưỡng tương đương chuẩn đối với âm đơn và
tai nghe nút tai
50
TCVN 11111-3:2015 Âm học. Mức chuẩn zero để hiệu chuẩn thiết
bị đo thính lực. Phần 3: Mức lực ngưỡng tương
đương chuẩn đối với âm đơn và máy rung
xương
20
51 TCVN 11111-4:2015 Âm học. Mức chuẩn zero để hiệu chuẩn thiết
bị đo thính lực. Phần 4: Mức chuẩn đối với
tiếng ồn che phủ dải hẹp
11
52 TCVN 8193:2015
Thay thế:TCVN 8193-1:2009
Đo đạc thủy văn. Đo dòng trong kênh hở sử
dụng đập thành mỏng
81
Xã hội học, dịch vụ, tổ chức, quản lý và chất lượng công ty Trở về đầu trang
53
TCVN ISO 10004:2015
Thay thế: TCVN ISO/TS
10004:2011
Quản lý chất lượng. Sự thỏa mãn của khách
hàng. Hướng dẫn theo dõi và đo lường
45
54 TCVN ISO 10008:2015
Quản lý chất lượng. Sự thỏa mãn của khách
hàng. Hướng dẫn về giao dịch thương mại điện
tử giữa doanh nghiệp và người tiêu dùng
41
55 TCVN ISO 18091:2015 Hệ thống quản lý chất lượng. Hướng dẫn áp
dụng TCVN ISO 9001:2008 tại chính quyền
địa phương
86
56 TCVN ISO/IEC 17067:2015
Thay thế:TCVN 7779:2008
Đánh giá sự phù hợp. Nguyên tắc cơ bản trong
chứng nhận sản phẩm và hướng dẫn về chương
trình chứng nhận sản phẩm
21
57
TCVN ISO/IEC TS 17021-3:2015 Đánh giá sự phù hợp. Yêu cầu đối với tổ chức
đánh giá và chứng nhận hệ thống quản lý.
Phần 3: Yêu cầu về năng lực đánh giá và
chứng nhận hệ thống quản lý chất lượng
13
Giao thông – Vận tải – Tàu thủy Trở về đầu trang
58 QCVN 41:2016/BGTVT Quy chuẩn kỹ thuật quốc gia về báo hiệu
đường bộ
391
An toàn – môi trường Trở về đầu trang
59
TCVN 10759-1:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 1: Nguồn gốc, các sản
phẩm phân rã sống ngắn và các phương pháp
đo
40
60
TCVN 10759-2:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 2: Phương pháp đo tích
hợp để xác định nồng độ năng lượng alpha
tiềm tàng trung bình của sản phẩm phân rã
40
7
sống ngắn
61
TCVN 10759-3:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 3: Phương pháp đo điểm
để xác định nồng độ năng lượng alpha tiềm
tàng của sản phẩm của sản phẩm phân rã sống
ngắn
25
62
TCVN 10759-4:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 4: Phương pháp đo tích
hợp để xác định nồng độ hoạt độ trung bình
với việc lấy mẫu thụ động và phân tích trễ
38
63 TCVN 10759-5:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 5: Phương pháp đo liên
tục để xác định nồng độ hoạt độ
18
64 TCVN 10759-6:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 6: Phương pháp đo điểm
để xác định nồng độ hoạt độ
19
65 TCVN 10759-7:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 7: Phương pháp tích lũy
để ước lượng tốc độ xả bề mặt
30
66
TCVN 10759-8:2016 Đo hoạt độ phóng xạ trong môi trường - không
khí: radon-222. Phần 8: Phương pháp luận về
khảo sát sơ bộ và khảo sát bổ sung trong các
tòa nhà
30
67
TCVN ISO/TR 14049:2015 Quản lý môi trường. Đánh giá vòng đời sản
phẩm. Các ví dụ minh họa cách áp dụng
TCVN ISO 14044 để xác định phạm vi, mục
tiêu và phân tích kiểm kê vòng đời sản phẩm
60
68 TCVN ISO/TS 14048:2015 Quản lý môi trường. Đánh giá vòng đời của
sản phẩm. Định dạng tài liệu về dữ liệu
52
69
TCVN ISO/TS 14071:2015 Quản lý môi trường. Đánh giá vòng đời sản
phẩm. Quá trình xem xét phản biện và năng
lực của người xem xét: Các yêu cầu bổ sung và
hướng dẫn đối với TCVN ISO 14044:2011
18
Nông nghiệp Trở về đầu trang
70
QCVN 01-183:2016/BNNPTNT Quy chuẩn kỹ thuật quốc gia Thức ăn chăn
nuôi - Quy định giới hạn tối đa cho phép hàm
lượng độc tố nấm mốc, kim loại nặng và vi
sinh vật trong thức ăn hỗn hợp cho gia súc, gia
cầm
10
Vấn đề chung, thuật ngữ, tiêu chuẩn hóa tư liệu Trở về đầu trang
71 TCVN ISO 14050:2015 Quản lý môi trường. Từ vựng 77
8
Thay thế:TCVN ISO 14050:2009
Khai thác mỏ và khoáng sản Trở về đầu trang
72 TCVN 11137:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng ẩm lưu trong mẫu phân tích. Phương
pháp khối lượng
8
73 TCVN 11139:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng asen. Phương pháp đo phổ
11
74 TCVN 11140:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng phospho. Phương pháp chiết-đo quang
molybdovanadat
9
75 TCVN 11141:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng nhôm. Phương pháp đo quang và
phương pháp khối lượng
14
76 TCVN 11142:2015 Quặng và tinh quặng mangan. Phương pháp
phân tích hóa học. Hướng dẫn chung
8
77 TCVN 11143:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng kali và natri. Phương pháp đo phổ phát
xạ nguyên tử ngọn lửa
10
78 TCVN 11144:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng nhôm, đồng, chì và kẽm. Phương pháp
đo phổ hấp thụ nguyên tử ngọn lửa
12
79 TCVN 11145:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng silic. Phương pháp khối lượng
8
80 TCVN 11146:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng canxi và magie. Phương pháp chuẩn độ
EDTA
14
81 TCVN 11147:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng titan. Phương pháp đo phổ 4,4'-
Diantipyrylmetan
9
82 TCVN 11148:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng canxi và magie. Phương pháp đo phổ
hấp thụ nguyên tử ngọn lửa
12
83 TCVN 11149:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng natri và kali. Phương pháp đo phổ hấp
thụ nguyên tử ngọn lửa
13
84 TCVN 11150:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng sắt tổng. Phương pháp chuẩn độ sau khử
và phương pháp đo phổ axit sulfosalicylic
14
85 TCVN 11151:2015 Quặng và tinh quặng mangan. Xác định hàm
lượng sắt tổng. Phương pháp đo phổ 1,10-
9
9
phenantrolin
Xây dựng – Vật liệu xây dựng Trở về đầu trang
86
TCVN 10141-4:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Phương pháp xác định tính năng làm
sạch không khí của vật liệu bán dẫn xúc tác
quang - Phần 4: Loại bỏ focmaldehyl
16
87
TCVN 10141-5:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Phương pháp xác định tính năng làm
sạch không khí của vật liệu bán dẫn xúc tác
quang - Phần 5: Loại bỏ metyl mercaptan
16
88 TCVN 10822:2015 Gốm mịn (gốm cao cấp, gốm kỹ thuật cao
cấp). Nguồn sáng tử ngoại để thử nghiệm vật
liệu bán dẫn xúc tác quang
11
89 TCVN 10823:2015 Gốm mịn (gốm cao cấp, gốm kỹ thuật cao
cấp). Phương pháp xác định hoạt tính kháng
nấm của vật liệu bán dẫn xuc tác quang
17
90 TCVN 10824:2015 Gốm mịn (gốm cao cấp, gốm kỹ thuật cao
cấp). Phương pháp thử đối với lớp phủ gốm.
Xác định ứng suất phá hủy
17
91 TCVN 10825:2015 Gốm mịn (gốm cao cấp, gốm kỹ thuật cao
cấp). Xác định sự phân bố cỡ hạt của bột gốm
bằng phương pháp nhiễu xạ laze
10
92 TCVN 10826:2015 Gốm mịn (gốm cao cấp, gốm kỹ thuật cao
cấp). Xác định khối lượng riêng và độ xốp
biểu kiến
13
93
TCVN 11105:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Nguồn sáng để thử nghiệm vật liệu bán
dẫn xúc tác quang sử dụng trong môi trường
ánh sáng trong phòng
13
94
TCVN 11106:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Xác định độ bền rạn nứt của gốm silic
nitrua dùng cho viên bi ổ lăn tại nhiệt độ
phòng bằng phương pháp rạn ấn lõm (IF)
12
95
TCVN 11107:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Xác định độ mỏi tiếp xúc lăn của gốm
silic nitrua tại nhiệt độ phòng bằng phương
pháp lăn bi trên mặt phẳng
16
96
TCVN 11108:2015 Gốm mịm (gốm cao cấp, gốm kỹ thuật cao
câp) - Phương pháp xác định hoạt tính kháng
khuẩn của vật liệu bán dẫn xúc tác quang trong
môi trường ánh sáng trong phòng
17
10
Hệ thống và bộ phận thủy lực Trở về đầu trang
97 TCVN 10651:2014 Hệ thống và bộ phận truyền động thủy lực/khí
nén. Xy lanh. Mã nhận dạng về kích thước lắp
đặt và kiểu lắp đặt
74
TIÊU CHUẨN NƯỚC NGOÀI
Công nghệ thông tin Trở về đầu trang
98 BS ISO 19080:2016 Intelligent transport systems. Communications
access for land mobiles (CALM). CoAP
facility.
30
99 ISO 18682:2016 Intelligent transport systems -- External hazard
detection and notification systems -- Basic
requirements
19
100 ISO 19080:2016 Intelligent transport systems --
Communications access for land mobiles
(CALM) -- CoAP facility
18
101 ISO/IEC 10118-1:2016
Replace: ISO/IEC 10118-1:2000
Information technology -- Security techniques
-- Hash-functions -- Part 1: General
12
102 ISO/IEC 11770-6:2016 Information technology -- Security techniques
-- Key management -- Part 6: Key derivation
23
103 ISO/IEC 13818-1:2015/Amd
6:2016
Carriage of Quality Metadata in MPEG-2
Systems
6
104 ISO/IEC 15444-1:2016 Information technology -- JPEG 2000 image
coding system: Core coding system
221
105 ISO/IEC 18328-3:2016 Identification cards -- ICC-managed devices --
Part 3: Organization, security and commands
for interchange
42
106
ISO/IEC 18477-8:2016 Information technology -- Scalable
compression and coding of continuous-tone
still images -- Part 8: Lossless and near-
lossless coding
60
107 ISO/IEC 18477-9:2016 Information technology -- Scalable
compression and coding of continuous-tone
still images -- Part 9: Alpha channel coding
23
108 ISO/IEC 18598:2016 Information technology -- Automated
infrastructure management (AIM) systems --
Requirements, data exchange and applications
34
109 ISO/IEC 27034-6:2016 Information technology -- Security techniques
-- Application security -- Part 6: Case studies
70
110 ISO/IEC 29110-3-3:2016 Systems and software engineering -- Lifecycle 18
11
profiles for Very Small Enterprises (VSEs) --
Part 3-3: Certification requirements for
conformity assessments of VSE profiles using
process assessment and maturity models
111
ISO/IEC 29155-4:2016
Systems and software engineering --
Information technology project performance
benchmarking framework -- Part 4: Guidance
for data collection and maintenance
33
112
ISO/IEC 30116:2016 Information technology -- Automatic
identification and data capture techniques --
Optical Character Recognition (OCR) quality
testing
29
113 ISO/IEC TR 19566-2:2016 Information technologies -- JPEG Systems --
Part 2: Transport mechanisms and packaging
17
114
ISO/IEC TR 20000-12:2016 Information technology -- Service
management -- Part 12: Guidance on the
relationship between ISO/IEC 20000-1:2011
and service management frameworks: CMMI-
SVC
32
115
ISO/IEC/IEEE 8802-1BA:2016 Information technology --
Telecommunications and information
exchange between systems -- Local and
metropolitan area networks -- Specific
requirements -- Part 1BA: Audio video
bridging (AVB) systems
31
116
ISO/IEC/IEEE 8802-1BR:2016 Information technology --
Telecommunications and information
exchange between systems -- Local and
metropolitan area networks -- Specific
requirements -- Part 1BR: Virtual bridged local
area networks -- Bridge port extension
121
117 ISO/TR 19083-1:2016 Intelligent transport systems -- Emergency
evacuation and disaster response and recovery
-- Part 1: Framework and concept of operation
54
Điện – Điện tử- Thiết bị điện Trở về đầu trang
118
ASTM B609/B609M-12(2016)
Replace: ASTM B609/B609M-
12e1
Standard Specification for Aluminum 1350
Round Wire, Annealed and Intermediate
Tempers, for Electrical Purposes
5
119 ASTM C1639-16
Replace: ASTM C1639-10a
Standard Specification for Fabrication Of
Cellular Glass Pipe And Tubing Insulation
4
120 ASTM C1710 -16 Standard Guide for Installation of Flexible 9
12
Replace: ASTM C1710-15 Closed Cell Preformed Insulation in Tube and
Sheet Form
121
BS EN 61000-1-2:2016
Replace; DD IEC/TS 61000-1-
2:2008
Electromagnetic compatibility (EMC).
General. Methodology for the achievement of
functional safety of electrical and electronic
systems including equipment with regard to
electromagnetic phenomena
80
122
BS EN 61189-5-1:2016 Test methods for electrical materials, printed
boards and other interconnection structures
and assemblies. General test methods for
materials and assemblies. Guidance for printed
board assemblies
32
123 IEC 60204:2016 SER Safety of machinery - Electrical equipment of
machines - ALL PARTS
990
124 IEC 60204-1:2016 RLV
Replace: IEC 60204-1:2016
Safety of machinery - Electrical equipment of
machines - Part 1: General requirements
439
125
IEC 60364-4-41/AMD1:2016
PRV
Replace: IEC 60364-4-41:2005
Amendment 1 - Low voltage electrical
installations - Part 4-41: Protection for safety -
Protection against electric shock
27
126
IEC 60623:2016 PRV
Replace: IEC 60623:2001
Secondary cells and batteries containing
alkaline or other non-acid electrolytes - Vented
nickel-cadmium prismatic rechageable single
cells
47
127 IEC 60794-1-2:2016 PRV
Replace: IEC 60794-1-2:2013
Optical fibre cables - Part 1-2: Generic
specification - Basic optical cable test
procedures - General guidance
19
128 IEC 60969:2016 RLV
Replace: IEC 60969:2016
Self-ballasted compact fluorescent lamps for
general lighting services - Performance
requirements
101
129
IEC 61010-2-030:2016 PRV
Replace: IEC 61010-2-
030:2010/COR1:2011
Safety requirements for electrical equipment
for measurement, control, and laboratory use -
Part 2-030: Particular requirements for
equipment having testing or measuring circuits
82
130
IEC 61010-2-034:2016 PRV
Safety requirements for electrical equipment
for measurement, control, and laboratory use -
Part 2-034: Particular requirements for
measurement equipment for insulation
resistance and test equipment for electric
strength
91
131 IEC 61010-2-120:2016 Safety requirements for electrical equipment
for measurement, control, and laboratory use -
67
13
Part 2-120: Particular safety requirements for
machinery aspects of equipment
132
IEC 61360-6:2016
Standard data element types with associated
classification scheme for electric components -
Part 6: IEC Common Data Dictionary (IEC
CDD) quality guidelines
82
133
IEC 61400-25-6:2016 PRV
Replace: IEC 61400-25-6:2010
Wind energy generation systems - Part 25-6:
Communications for monitoring and control of
wind power plants - Logical node classes and
data classes for condition monitoring
49
134 IEC 62211:2016 PRV
Replace: IEC 62211:2003
Inductive components - Reliability
management
15
135
IEC 62226-3-
1:2007+AMD1:2016 CSV
Exposure to electric or magnetic fields in the
low and intermediate frequency range -
Methods for calculating the current density and
internal electric field induced in the human
body - Part 3-1: Exposure to electric fields -
Analytical and 2D numerical models
225
136 IEC 62646:2016
Replace: IEC 62646:2012
Nuclear power plants - Control rooms -
Computer-based procedures
93
137 IEC 62925:2016 PRV
Concentrator photovoltaic (CPV) modules -
Thermal cycling test to differentiate increased
thermal fatigue durability
26
138 IEC 62952-1:2016 Power sources for a wireless communication
device - Part 1: General requirements of power
modules
29
139 IEC 62952-2:2016 Power sources for a wireless communication
device - Part 2: Profile for power modules with
batteries
17
140 IEC 63000:2016 Technical documentation for the assessment of
electrical and electronic products with respect
to the restriction of hazardous substances
21
141 IEC 63002:2016 Identification and communication
interoperability method for external power
supplies used with portable computing devices
48
142
IEC PAS 63062:2016 Maritime navigation and radiocommunication
equipment and systems - Removable external
data source (REDS) - General requirements,
methods of testing and required test results
8
143 IEC TR 60728-3-2:2016 Cable networks for television signals, sound 24
14
signals and interactive services - Part 3-2:
Method of measurement of 5thorder non-
linearity for active electronic equipment using
five carriers
144 IEC TR 62541-1:2016
Replace: IEC TR 62541-1:2010
OPC unified architecture - Part 1: Overview
and concepts
26
145 IEC TS 61724-2:2016 Photovoltaic system performance - Part 2:
Capacity evaluation method
27
146 IEC White Paper GEI:2016
Global energy interconnection 78
147
PD IEC/TS 62257-9-4:2016
Replace: DD IEC/TS 62257-9-
4:2006
Recommendations for renewable energy and
hybrid systems for rural electrification.
Integrated systems. User installation
28
Giao thông – Vận tải – Tàu thủy Trở về đầu trang
148 ASTM D6984-16a
Replace: ASTM D6984-16
Standard Test Method for Evaluation of
Automotive Engine Oils in the Sequence IIIF,
Spark-Ignition Engine
54
149 ASTM D7320-16a
Replace: ASTMD7320-16
Standard Test Method for Evaluation of
Automotive Engine Oils in the Sequence IIIG,
Spark-Ignition Engine
53
150
ASTM D7484-16
Replace: ASTM D7484-15
Standard Test Method for Evaluation of
Automotive Engine Oils for Valve-Train Wear
Performance in Cummins ISB Medium-Duty
Diesel Engine
27
151 BS EN 12896-3:2016 Public transport. Reference data model.
Timing information and vehicle scheduling
90
152 BS EN 16734:2016 Automotive fuels. Automotive B10 diesel fuel.
Requirements and test methods.
24
153
ISO 17488:2016 Road vehicles -- Transport information and
control systems -- Detection-response task
(DRT) for assessing attentional effects of
cognitive load in driving
76
154 ISO 17987-6:2016
Road vehicles -- Local Interconnect Network
(LIN) Part 6: Protocol conformance test
specification
66
155 ISO 19364:2016 Passenger cars -- Vehicle dynamic simulation
and validation -- Steady-state circular driving
behaviour
13
156 ISO 19689:2016 Motorcycles and mopeds -- Communication
between vehicle and external equipment for
12
15
diagnostics -- Diagnostic connector and related
electrical circuits, specification and use
Cơ khí – Chế tạo Trở về đầu trang
157
ASTM D6121 -16a
Replace: ASTM D6121-16
Standard Test Method for Evaluation of Load-
Carrying Capacity of Lubricants Under
Conditions of Low Speed and High Torque
Used for Final Hypoid Drive Axles
21
158
ASTM D6593- 16a
Replace: ASTM D6593-16
Standard Test Method for Evaluation of
Automotive Engine Oils for Inhibition of
Deposit Formation in a Spark-Ignition Internal
Combustion Engine Fueled with Gasoline and
Operated Under Low-Temperature, Light-Duty
Conditions
16
159
ASTM D6750 -16
Replace: ASTM D6750-15a
Standard Test Methods for Evaluation of
Engine Oils in a High-Speed, Single-Cylinder
Diesel Engine#x2014;1K Procedure
(0.4#x2009;% Fuel Sulfur) and 1N Procedure
(0.04#x2009;% Fuel Sulfur
70
160
ASTM D7035 -16
Replace: ASTM D7035-10
Standard Test Method for Determination of
Metals and Metalloids in Airborne Particulate
Matter by Inductively Coupled Plasma Atomic
Emission Spectrometry (ICP-AES)
29
161 ASTM D7468-16
Replace: ASTM D7468-15
Standard Test Method for Cummins ISM Test 36
162 ASTM F2756 - 11 (2016)
Replace: ASTM F2756-11
Standard Test Method for Determining Energy
Consumption of Vacuum Cleaners
11
163 ISO 15236-1:2016
Replace: ISO 15236-1:2005
Steel cord conveyor belts -- Part 1: Design,
dimensions and mechanical requirements for
conveyor belts for general use
15
164
ISO 16440:2016 Petroleum and natural gas industries --
Pipeline transportation systems -- Design,
construction and maintenance of steel cased
pipelines
39
165 ISO 18264:2016
Textile slings -- Lifting slings for general
purpose lifting operations made from fibre
ropes -- High modulus polyethylene (HMPE)
35
166 ISO 2584:2016
Replace: ISO 2584:1972
Cylindrical cutters with plain bore and key
drive -- Metric series
4
167 ISO 3292:2016
Replace: ISO 3292:1995
Extra-long parallel shank twist drills 4
16
168 ISO 4204:2016
Replace: ISO 4204:1977
Countersinks, 90°, with Morse taper shanks
and detachable pilots
4
169 ISO 4206:2016
Replace: ISO 4206:1991
Counterbores with parallel shanks and solid
pilots
3
170
ISO 4306-3:2016
Replace: ISO 4306-3:2003; ISO
4306-3:2003/Amd 1:2011
Cranes -- Vocabulary -- Part 3: Tower cranes 14
171 ISO 7079:2016
Replace: ISO 7079:1981
Core drills with parallel shanks and with
Morse taper shanks
9
172
ISO 7153-1:2016
Replace: ISO 7153-1:1991; ISO
7153-1:1991/Amd 1:1999
Surgical instruments -- Materials -- Part 1:
Metals
13
173 ISO 8871-5:2016
Replace: ISO 8871-5:2005
Elastomeric parts for parenterals and for
devices for pharmaceutical use -- Part 5:
Functional requirements and testing
10
174
JIS B 1702-1:2016
Replace: JIS B 1702-1:1998
Cylindrical gears -- ISO system of flank
tolerance classification -- Part 1: Definitions
and allowable values of deviations relevant to
flanks of gear teeth
47
Luyện kim – Sản phẩm kim loại Trở về đầu trang
175
ASTM B250/B250M-16
Replace: ASTM B250/B250M-13
Standard Specification for General
Requirements for Wrought Copper Alloy Wire
Pages:10
10
176 ASTM B498/B498M-08(2016)
Standard Specification for Zinc-Coated
(Galvanized) Steel Core Wire for Use in
Overhead Electrical Conductors
4
177
ASTM B606/B606M -08(2016)
Replace: ASTM B606/B606M-
08e1
Standard Specification for High-Strength Zinc-
Coated (Galvanized) Steel Core Wire for
Aluminum and Aluminum-Alloy Conductors,
Steel Reinforced
4
178
ASTM B802/B802M-10(2016)
Replace: ASTM B802/B802M-10
Standard Specification for
Zinc#x2013;5#x2009;% Aluminum-
Mischmetal Alloy-Coated Steel Core Wire for
Aluminum Conductors, Steel Reinforced
(ACSR)
5
179
ASTM B803/B803M -80(2016)
Replace: ASTM B803/B803M-
08e1
Standard Specification for High-Strength
Zinc#x2013;5#x2009;% Aluminum-
Mischmetal Alloy-Coated Steel Core Wire for
Use in Overhead Electrical Conductors
4
17
180
ASTM B935 -16
Replace: ASTM B935-
05(2009)e1
Standard Guide for Steam Treatment of
Ferrous Powder Metallurgy (PM) Materials
3
181
ASTM D7035 -16 Standard Test Method for Determination of
Metals and Metalloids in Airborne Particulate
Matter by Inductively Coupled Plasma Atomic
Emission Spectrometry (ICP-AES)
29
182 ASTM D7468-16 Standard Test Method for Cummins ISM Test 36
183
ASTM F1325 – 91(2016)
Replace: ASTM F1325-
91(2008)e1
Standard Specification for Stainless Steel
Suture Needle Holders-General Workmanship
Requirements and Corresponding Test
Methods
2
184
ASTM F1744- 96(2016)
Replace: ASTM F1744-
96(2008)e1
Standard Guide for Care and Handling of
Stainless Steel Surgical Instruments
6
185 ASTM F3192 – 16
Standard Specification for High-Purity Copper
Sputtering Target Used for Through-Silicon
Vias (TSV) Mettalization
5
186 ASTM F436/F436M – 16
Replace: ASTM F436-11
Standard Specification for Hardened Steel
Washers Inch and Metric Dimensions
8
187 ASTM F436M -11
Replaced by:ASTM F436 /
F436M - 16
Standard Specification for Hardened Steel
Washers [Metric] (Withdrawn 2016)
6
188 IEC 62917:2016 Railway applications - Fixed installations -
Electric traction - Copper and copper alloy
grooved contact wires
97
189 ISO 148-1:2016
Replace: ISO 148-1:2009
Metallic materials -- Charpy pendulum impact
test -- Part 1: Test method
29
190 ISO 148-2:2016
Replace: ISO 148-2:2008
Metallic materials -- Charpy pendulum impact
test -- Part 2: Verification of testing machines
38
191
ISO 148-3:2016
Replace: ISO 148-3:2008
Metallic materials -- Charpy pendulum impact
test -- Part 3: Preparation and characterization
of Charpy V-notch test pieces for indirect
verification of pendulum impact machines
18
192 ISO 15614-7:2016
Replace: ISO 15614-7:2007
Specification and qualification of welding
procedures for metallic materials -- Welding
procedure test -- Part 7: Overlay welding
20
193 JIS B 8265:2016/AMD1 Contruction of pressure vessel -- General
principles. (Amendment 1)
2
18
194 JIS G 0582:2012 Automated ultrasonic examination of steel
pipes and tubes
20
195 JIS G 0596:2010 Method of corrosion test for stainless steel
tube fittings
6
196 JIS G 0601:2012
Replace:JIS G 0601:2002
Testing methods for clad steels 14
197 JIS G 1211-2:2011
Replace:JIS G 1211:1995
Iron and steel -- Determination of carbon
content -- Part 2: Gas volumetric method after
combustion
3
198 JIS G 1211-3:2011
Replace:JIS G 1211:1995
Iron and steel -- Determination of carbon
content -- Part 3: Infrared absorption method
after combustion
17
199 JIS G 1281:2006/AMD1 Methods for chemical analysis of nickel-
chromium-iron alloys (Amendment 1)
4
200 JIS G 3115:2016
Replace:JIS G 3115:2010
Steel plates for pressure vessels for
intermediate temperature service
16
201 JIS G 3129:2005
High tensile strength steel for tower structural
purposes
7
202 JIS G 3320:2016
Replace:JIS G 3320:1999
Prepainted stainless steel sheet and strip 17
203
JIS G 3445:2016
Replace:JIS G 3445:2010
Carbon steel tubes for machine structure 13
204 JIS G 3455:2016
Replace:JIS G 3455:2012
Carbon steel pipes for high pressure service 22
205 JIS G 3457:2016
Replace:JIS G 3457:2012
Arc welded carbon steel pipes 9
206
JIS G 3507-2:2005
Replace:JIS G 3539:1991
Carbon steels for cold heading -- Part 2: Wires 15
207 JIS G 3508-1:2010
Replace:JIS G 3508-1:2005
Boron steels for cold heading -- Part 1: Wire
rods
29
208 JIS H 1305:2005 Method for optical emission spectrochemical
analysis of aluminium and aluminium alloys
15
19
209 JIS H 4657:2016
Replace:JIS H 4657:2012
Titanium and titanium alloys --- Forgings 7
210 JIS H 5120:2016
Replace:JIS H 5120:2009
Copper and copper alloy castings
17
211 JIS H 5121:2016
Replace:JIS H 5121:2009
Copper alloy continuous castings 11
212 JIS Z 3607:2016 Friction welding of metallic materials 42
Xây dựng – Vật liệu xây dựng Trở về đầu trang
213 ISO 14448:2016
Low modulus adhesives for exterior tile
finishing
20
214 ASTM D1619-16a
Replace: ASTM D1619-16
Standard Test Methods for Carbon
Black#x2014;Sulfur Content
16
215 JIS A 5209:2014
Replace:JIS A 5209:2010
Ceramic tiles 41
216 JIS A 1453:2015
Replace:JIS A 1453:1973
Method of abrasion test for building materials
and part of building construction (abrasive-
paper method)
16
217 JIS A 5901:2016
Replace:JIS A 5901:1974
Molding silica sand 6
218 JIS G 5901:2016
Replace: JIS G 5901:1974
Molding silica sand 6
219 JIS S 1031:2016
Replace:JIS S 1031:2004
Office furniture --- Desks and tables 18
220 JIS A 5705:2016
Replace:JIS A 5705:2010
Polyvinyl chloride floor coverings 12
221 JIS A 5207:2014
Replace:JIS A 5207:2011
Sanitary wares 68
222 BS EN ISO 20088-1:2016 Determination of the resistance to cryogenic
spillage of insulation materials. Liquid phases
30
223 ASTM D8 -16a
Replace: ASTM D8-16
Standard Terminology Relating to Materials
for Roads and Pavements
4
Đo lường và phép đo, hiện tượng vật lý Trở về đầu trang
224 ASTM C610 -16
Replace: ASTM C610-15
Standard Specification for Molded Expanded
Perlite Block and Pipe Thermal Insulation
4
20
225
ASTM D6767-16
Replace: ASTM D6767-14
Standard Test Method for Pore Size
Characteristics of Geotextiles by Capillary
Flow Test
6
226 ASTM F468 – 16
Replace: ASTM F468-15e1
Standard Specification for Nonferrous Bolts,
Hex Cap Screws, Socket Head Cap Screws,
and Studs for General Use
15
227
BS EN ISO 15618-1:2016
Replace: BS EN ISO 15618-
1:2002
Qualification testing of welders for underwater
welding. Hyperbaric wet welding
34
228
CISPR 16-1-4/AMD2:2016 PRV
Replace: CISPR 16-1-
4:2010/AMD1:2012
Amendment 2 - Specification for radio
disturbance and immunity measuring apparatus
and methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas and
test sites for radiated disturbance
measurements
18
229
CISPR 16-1-6/AMD1:2016 PRV
Replace: CISPR 16-1-6:2014
Amendment 1 - Specification for radio
disturbance and immunity measuring apparatus
and methods - Part 1-6: Radio disturbance and
immunity measuring apparatus - EMC antenna
calibration
56
230
IEC 61000-4-23:2016
Replace: IEC 61000-4-23:2000
Electromagnetic Compatibility (EMC) - Part
4-23: Testing and measurement techniques -
Test methods for protective devices for HEMP
and other radiated disturbances
104
231
IEC 61010-1/AMD1:2016 PRV
Replace: IEC 61010-
1:2010/COR2:2013
Amendment 1 - Safety requirements for
electrical equipment for measurement, control,
and laboratory use - Part 1: General
requirements
27
232 IEC 61340-4-7:2016 PRV
Replace: IEC 61340-4-7:2010
Electrostatics - Part 4-7: Standard test methods
for specific applications - Ionization
62
233
IEC 62846:2016
Railway applications - Current collection
systems - Requirements for and validation of
measurements of the dynamic interaction
between pantograph and overhead contact line
49
234 IEC TR 62921:2016
Replace: IEC TR 62921:2015
Quantification methodology for greenhouse
gas emissions for computers and monitors
51
235 ISO 11171:2016
Replace: ISO 11171:2010
Hydraulic fluid power -- Calibration of
automatic particle counters for liquids
51
236 ISO 16852:2016 Flame arresters -- Performance requirements, 50
21
Replace: ISO 16852:2008; ISO
16852:2008/Cor 1:2008; ISO
16852:2008/Cor 2:2009
test methods and limits for use
237
ISO 18674-2:2016 Geotechnical investigation and testing --
Geotechnical monitoring by field
instrumentation -- Part 2: Measurement of
displacements along a line: Extensometers
46
238
ISO 18935:2016
Replace: ISO 18935:2005; ISO
18935:2005/Cor 1:2007
Imaging materials -- Colour images --
Determination of water resistance of printed
colour images
8
239 ISO 4230:2016 Hand- and machine-operated circular screwing
dies for taper pipe threads -- R series
4
240 ISO 4231:2016
Replace: ISO 4231:1987
Hand- and machine-operated circular screwing
dies for parallel pipe threads -- G series
4
241 ISO 5832-3:2016
Replace: ISO 5832-3:1996
Implants for surgery -- Metallic materials --
Part 3: Wrought titanium 6-aluminium 4-
vanadium alloy
7
242
ISO 9856:2016
Replace: ISO 9856:2003; ISO
9856:2003/Amd 1:2012
Conveyor belts -- Determination of elastic and
permanent elongation and calculation of elastic
modulus
6
243 ISO/IEC 13818-1:2015/Amd
5:2016
Carriage of MPEGH 3D audio over MPEG2
systems
17
244 JIS H 0505:1975
Measuring methods for electrical resistivity
and conductivity of non-ferrous materials
7
Chất dẻo – Cao su Trở về đầu trang
245 ASTM D4101-14e2
Replace: ASTM D4101-14e1
Standard Specification for Polypropylene
Injection and Extrusion Materials
17
246
ASTM F1839-08(2016)
Replace: ASTM F1839-
08(2012)e1
Standard Specification for Rigid Polyurethane
Foam for Use as a Standard Material for
Testing Orthopaedic Devices and Instruments
6
247 ISO 1043-3:2016
Replace: ISO 1043-3:1996
Plastics -- Symbols and abbreviated terms --
Part 3: Plasticizers
8
248 ISO 1043-3:2016 Plastics -- Symbols and abbreviated terms --
Part 3: Plasticizers
8
249
ISO 11344:2016
Replace: ISO 11344:2004; ISO
11344:2004/Cor 1:2008
Rubber, raw synthetic -- Determination of the
molecular-mass distribution of solution
polymers by gel permeation chromatography
20
22
250 ISO 1304:2016
Rubber compounding ingredients -- Carbon
black -- Determination of iodine adsorption
number
14
251 ISO 15512:2016 Plastics -- Determination of water content 25
252 ISO 7233:2016
Replace: ISO 7233:2006
Rubber and plastics hoses and hose assemblies
-- Determination of resistance to vacuum
6
253 ISO 7326:2016
Rubber and plastics hoses -- Assessment of
ozone resistance under static conditions
8
254 JIS K 6259-1:2015
Rubber, vulcanized or thermoplastic --
Determination of ozone resistance -- Part 1:
Static and dynamic strain testing
29
255 JIS K 6259-2:2015 Rubber, vulcanized or thermoplastic --
Determination of ozone resistance -- Part 2:
Determination of the ozone concentration
26
Dầu mỏ Trở về đầu trang
256 ASTM D5291-16
Replace: ASTM D5291-10(2015)
Standard Test Methods for Instrumental
Determination of Carbon, Hydrogen, and
Nitrogen in Petroleum Products and Lubricants
8
257
ASTM D7171-16a
Replace: ASTM D7171-05(2016)
Standard Test Method for Hydrogen Content
of Middle Distillate Petroleum Products by
Low-Resolution Pulsed Nuclear Magnetic
Resonance Spectroscopy
6
Y tế - Chăm sóc sức khỏe Trở về đầu trang
258 ASTM D2208-16
Replace: ASTM D2208-00 (2010)
Standard Test Method for Breaking Strength of
Leather by the Grab Method
2
259 ASTM D6077 -16
Replace: ASTM D6077-10
Standard Test Method for Trapezoid Tearing
Strength of Leather
2
260
ASTM E825-98(2016)
Replace: ASTME825-98(2009)
Standard Specification for Phase Change-Type
Disposable Fever Thermometer for
Intermittent Determination of Human
Temperature
4
261 ASTM F116 – 12(2016)
Replace: ASTM F116-12
Standard Specification for Medical
Screwdriver Bits
4
262
ASTM F1613 – 95(2016)
Replace: ASTM F1613-
95(2008)e1
Standard Specification for Surgical
Tissue/Dressing/Pick-Up Forceps (Thumb
Type)
2
263 ASTM F1638 - 95(2016) Standard Terminology for Surgical 2
23
Replace: ASTM F1638-95(2008)
e1
Tissue/Dressing/Pick-Up Forceps (Thumb-
Type)
264 ASTM F1840-10(2016)
Replace: ASTM F1840-10e1
Standard Terminology for Surgical Suture
Needles
10
265 ASTM F2393- 12(2016)
Replace: ASTM F2393-12
Standard Specification for High-Purity Dense
Magnesia Partially Stabilized Zirconia (Mg-
PSZ) for Surgical Implant Applications
3
266 ASTM F2456- 04(2016)
Replace: ASTM F2456-04(2009)
Standard Specification for Youth-Resistant
Firearms Containers (YRFCs)
12
267 ASTM F603- 12(2016)
Replace: ASTM F603-12
Standard Specification for High-Purity Dense
Aluminum Oxide for Medical Application
3
268
IEC 80601 -2- 58 : 2014 + AMD1
: 2016 CSV
Medical electrical equipment - Part 2-58:
Particular requirements for the basic safety and
essential performance of lens removal devices
and vitrectomy devices for ophthalmic surgery
133
269 ISO 12505-2:2016 Skin barrier for ostomy aids -- Test methods --
Part 2: Wet integrity and adhesive strength
12
270
ISO 16409:2016
Replace: ISO 16409:2006; ISO
16409:2006/Amd 1:2010
Dentistry -- Oral care products -- Manual
interdental brushes
12
271
ISO 80369-7:2016
Replace: ISO 594-1:1986; ISO
594-2:1998
Small-bore connectors for liquids and gases in
healthcare applications -- Part 7: Connectors
for intravascular or hypodermic applications
44
272 ISO 9173-1:2016
Replace: ISO 9173-1:2006
Dentistry -- Extraction forceps -- Part 1:
General requirements
5
273
ISO/CIE 28077:2016 (CIE S
019/E:2015)
Replace: ISO 28077:2006 (CIE
S019/E:2006)
Photocarcinogenesis action spectrum (non-
melanoma skin cancers)
7
Xã hội học, dịch vụ, tổ chức, quản lý và chất lượng công ty Trở về đầu trang
274
ASTM D5980 -16
Replace: ASTM D5980-
96(2010)e1
Standard Guide for Selection and
Documentation of Existing Wells for Use in
Environmental Site Characterization and
Monitoring
10
275 ASTM E1958- 16a
Replace: ASTME1958-16
Standard Guide for Sensory Claim
Substantiation
27
276 ASTM F1789- 16 Standard Terminology for F16 Mechanical 15
24
Replace: ASTM F1789-11b Fasteners
277 ASTM F1821- 16
Replace: ASTMF1821-15
Standard Consumer Safety Specification for
Toddler Beds
11
278 ASTM F2647- 07(2016)
Replace: ASTM F2647-07(2013)
Standard Guide for Approved Methods of
Installing a CVS (Central Vacuum System)
7
279 ASTM F963- 16
Replace: ASTM F963-11
Standard Consumer Safety Specification for
Toy Safety
90
280 BS EN 13254:2016
Geotextiles and geotextile-related products.
Characteristics required for the use in the
construction of reservoirs and dams.
48
281
BS EN 61069-7:2016
Replace: BS EN 61069-7:1999,
IEC 61069-7:1999
Industrial-process measurement, control and
automation. Evaluation of system properties
for the purpose of system assessment.
Assessment of system safety
24
282
BS ISO 37001:2016
Replace: BS 10500:2011
Anti-bribery management systems.
Requirements with guidance for use.
58
283
ISO 18828-2:2016 Industrial automation systems and integration -
- Standardized procedures for production
systems engineering -- Part 2: Reference
process for seamless production planning
32
284 ISO 37001:2016
Anti-bribery management systems --
Requirements with guidance for use
47
285 ISO/IEC 23009-1:2014/Amd
3:2016
Authentication, MPD linking, Callback Event,
Period Continuity and other Extensions
30
286
ISO/IEC TS 17021-9:2016
Conformity assessment -- Requirements for
bodies providing audit and certification of
management systems -- Part 9: Competence
requirements for auditing and certification of
anti-bribery management systems
5
287
PD CEN/TR 16946-2:2016 Energy Performance of Buildings. Inspection
of Building Automation, Controls and
Technical Building Management.
Accompanying TR prEN 16946-1:2015.
Modules M10-11
30
Vấn đề chung, thuật ngữ, tiêu chuẩn hóa tư liệu Trở về đầu trang
288 ISO 9999:2016
Replace: ISO 9999:2011
Assistive products for persons with disability -
- Classification and terminology
194
An toàn – môi trường Trở về đầu trang
25
289
ASTM F1359/F1359M- 16a
Replace: ASTM F1359/F1359M-
16
Standard Test Method for Liquid Penetration
Resistance of Protective Clothing or Protective
Ensembles Under a Shower Spray While on a
Manikin
13
290 ISO 15512:2016 Plastics -- Determination of water content 25
291 ISO 22262-3:2016 Air quality -- Bulk materials -- Part 3:
Quantitative determination of asbestos by X-
ray diffraction method
45
292
ISO 374-1:2016 Protective gloves against dangerous chemicals
and micro-organisms -- Part 1: Terminology
and performance requirements for chemical
risks
7
293
ISO 374-5:2016
Protective gloves against dangerous chemicals
and micro-organisms -- Part 5: Terminology
and performance requirements for micro-
organisms risks
4
294 JIS T 8106:2016 Test method for slip resistance of protective
and occupational footwear
27
Thử nghiệm Trở về đầu trang
295 ASTM B124/B124M-16a
Replace: ASTM B124/B124M-16
Standard Specification for Copper and Copper
Alloy Forging Rod, Bar, and Shapes
8
296
ASTM B249/B249M-16
Replace: ASTM B249/B249M-
15a
Standard Specification for General
Requirements for Wrought Copper and
Copper-Alloy Rod, Bar, Shapes and Forgings
14
297
ASTM B524/B524M -99(2016)
Replace: ASTM B524/B524M-
99(2011)
Standard Specification for Concentric-Lay-
Stranded Aluminum Conductors, Aluminum-
Alloy Reinforced (ACAR, 1350/6201)
11
298 ASTM B911/B911M-12(2016)
Replace: ASTM B911/B911M-12
Standard Specification for ACSR Twisted Pair
Conductor (ACSR/TP)
4
299 ASTM C1497-16
Replace: ASTM C1497-12
Standard Specification for Cellulosic Fiber
Stabilized Thermal Insulation
12
300 ASTM D2598 -16
Replace: ASTM D2598-12
Standard Practice for Calculation of Certain
Physical Properties of Liquefied Petroleum
(LP) Gases from Compositional Analysis
3
301 ASTM D3700-16
Replace: ASTM D3700-14
Standard Practice for Obtaining LPG Samples
Using a Floating Piston Cylinder
11
302 ASTM E1104 - 98(2016)
Replace: ASTM E1104-98(2009)
Standard Specification for Clinical
Thermometer Probe Covers and Sheaths
3
26
303 ASTM E1979 - 12(2016)
Replace: ASTM E1979-12
Standard Practice for Ultrasonic Extraction of
Paint, Dust, Soil, and Air Samples for
Subsequent Determination of Lead
7
304 ASTM E2166- 16
Replace: ASTM E2166-12
Standard Practice for Organizing and
Managing Building Data
6
305 ASTM E2239- 12(2016)
Replace: ASTM E2239-12
Standard Practice for Record Keeping and
Record Preservation for Lead Hazard
Activities
3
306 ASTM E2998 – 16
Standard Practice for Characterization and
Classification of Smokeless Powder
7
307 ASTM E3020- 16a
Replace: ASTM E3020-16
Standard Practice for Ignition Sources 32
308 ASTM F1581- 08(2016)
Replace: ASTM F1581-08(2012)
Standard Specification for Composition of
Anorganic Bone for Surgical Implants
4
309 ASTM F2024-10(2016)
Replace: ASTM F2024-10
Standard Practice for X-ray Diffraction
Determination of Phase Content of Plasma-
Sprayed Hydroxyapatite Coatings
4
310 ASTM F2369- 04(2016)
Replace: ASTM F2369-04(2010)
Standard Safety Specification for Non-Integral
Firearm Locking Devices
14
311 ASTM F2839- 11(2016)
Replace: ASTM F2839-11
Standard Practice for Compliance Audits to
ASTM Standards on Light Sport Aircraft
5
312 ASTM F2863- 11(2016)
Replace: ASTM F2863-11
Standard Specification for Central Vacuum
Hose Inlet Valve Socket Dimensions
2
313
ISO 10326-1:2016
Replace: ISO 10326-1:1992; ISO
10326-1:1992/Amd 1:2007; SO
10326-1:1992/Amd 2:2011
Mechanical vibration -- Laboratory method for
evaluating vehicle seat vibration -- Part 1:
Basic requirements
22
314
ISO 14145-1:2016
Replace: ISO 14145-1:1998; ISO
14145-1:1998/Amd 1:2011
Roller ball pens and refills -- Part 1: General
use
9
315 ISO 17638:2016
Replace: ISO 17638:2003
Non-destructive testing of welds -- Magnetic
particle testing
15
316 ISO 20957-9:2016
Replace: ISO 20957-9:2005
Stationary training equipment -- Part 9:
Elliptical trainers, additional specific safety
requirements and test methods
14
317 ISO 23748:2016 Aerospace series -- O-ring grooves -- 30
27
Dimensions
318 ISO 27668-1:2016
Replace: ISO 27668-1:2009
Gel ink ball pens and refills -- Part 1: General
use
11
319
ISO/IEC 13818-1:2015/Amd
4:2016
Replace: ISO 4230:1987
New profiles and levels for MPEG4 audio
descriptor
3
Thư viện Trường Đại học Công Nghiệp TP.HCM phối hợp với Trung tâm thông tin khoa
học và công nghệ TP.HCM cung cấp thông tin toàn văn dành cho người sử dụng thư viện trong
trường (SV, GV, HVCH, CBVC...) có nhu cầu học tập, nghiên cứu, tham khảo. Để gửi và nhận thông
tin, xin vui lòng liên hệ:
1. Thư viện Đại học Công Nghiệp TP.HCM: Gửi thông tin yêu cầu bằng 1 trong các phương tiện
sau:
+ Cổng thông tin Thư viện: http://lib.iuh.edu.vn tại mục "Yêu cầu tin";
+ Facebook: http://facebook.com/libiuh - Gửi qua "Tin nhắn" trên Page;
+ Liên hệ Phòng Nghiệp vụ: Phan Minh Trí – 0919.8989.33 - ĐT: (08) 38940390 (130) - Email:
vietnam.tri@gmail.com
2. Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957
Website: www.cesti.gov.vn Email: dbtt@cesti.gov.vn
Lưu ý
1/ Khi đến gửi yêu cầu thông tin, bạn nhớ mang theo thẻ sinh viên, thẻ giảng viên của trường.
2/ Thông tin được cung cấp miễn phi, ngoại trừ chi phí: in ấn tài liệu, mua tài liệu (nếu có)
Thư viện Trường Đại học Công nghiệp Thành phố H Chí Minh.
top related