The Global Expert in Solid State Switching · PDF fileWeight Reduced Energy Cost ... Deep Drawing machine Sealing machine ... and valve control. Typical examples are the use of lamps
Post on 19-Mar-2018
216 Views
Preview:
Transcript
The Global Expert in Solid State Switching Technology
Manufacturers in all industry segments such as food and beverage, pharmaceutical, cosmetics, chemicals, etc. are constantly looking to optimize their packaging processes through improving efficiency and reducing costs. These goals are achievable through the implementation of packaging systems that are innovative, fast, reliable and cost effective.
Packaging machinery is known for its advanced technology, due to the high level of automation of packaging lines and the intensive use of advanced electronic components. In every case, each component has to meet very strict requirements specific to each industry.
Whatever products need to be packaged and whichever the materials used, Crydom Solid State Relays and Contactors are ideal solutions for heating and AC or DC motor control increasing the efficiency of reliability of high performance packaging equipment including Filling & Closing Machinery, Form-Fill-Seal Machinery, Wrapping Machinery, and Palletizing Machinery.
Our more than 40 years of experience providing top notch switching solutions and support make Crydom the indisputable global expert in solid state relay technology and preferred choice of companies all over the world.
Efficient & Reliable Packaging Solutions
Crydom is a Supplier Member of PMMI, the Association for Packaging and Processing Technologies
DEC
No acoustical noise when the output contacts change states.
No moving parts. Therefore, no mechanical wear and tear on the output contact, ideal for repetitive applications.
SSRs are not susceptible to erratic or unreliable operation when operating under tough environments.
SSRs do not generate sparks or electric arcs and do not bounce either electrically or mechanically.
Instantaneous turn-on Solid State Relays and Contactors respond to a control signal in less than 100 μs.
SSRs can be switched by digital systems such as μC based systems, or driven by limit switches and sensors.
Suitable for mounting in either vertical or horizontal position, "dead bug" position or adjacent mounting.
Solid state technology allows smaller constraints compared to electromechanical products.
Include the forward/reverse and interlock control, reducing overall installed cost of the equipment.
Magnetic fields have little effect on SSRs since they don’t use a magnetic coil to switch the load.
SSRs are much lighter than equivalent electromechanical versions; up to 70%.
Energy savings are achieved from switching the load off when it is not required; ensuring maximum efficiency.
Long Life
FastSwitching
EmbeddedControlFunctions
Space SavingCompact Package
MagneticNoise Immunity
PositionInsensitive
Shock &VibrationResistant
Compatibilitywith ControlSystems
Ideal forHarshEnvironments
Quiet Operation
kgReduced Weight
Reduced Energy Cost
Why use Solid State Technology?
Zero voltage turn-on and zero current turn-off allow for minimum electrical disturbances generated.
MinimumElectricalNoise
Solid State Relays and Contactors require very little input power "coil current" to switch large loads.
Low Power Consumption
Questions?Call or e-mail:
Tel.: +1 (877) 502 5500 Tel.: +44 (0) 1202 416170e-mail: sales@crydom.com e-mail: sales-europe@crydom.com
EMEAAmericas Tel.: +86 (21) 2306 1648e-mail: sales-cn@crydom.com
Asia
Application Products Application Products
PLC Signal Interface
Conveyor motor control
Closing heating resistance control
Power vibrator motor control
Heating resistance control
Up/down moulder motor control
Cover sheet heating resistance control
Up/down cover sheet motor control
Filling Machine Thermoforming machine
Deep Drawing machine
Sealing machine
Vertical Bagger
Filling & Closing Machinery Form-Fill-Seal Machinery
3 - 12 Amps 6 Amps
10 - 30 Amps3 - 8 Amps
4.8 - 7.6 Amps2.4 - 4.2 Amps5 6
1 2
43
SeriesOne DR SeriesOne DR TIMER
DRA Series CKR Series
DRA Series Contactors SOLICON DRC Series
DIN RAIL MOUNT
•• • •
11 mm or 18 mm wide SSRsAC or DC Control Voltage optionsIP20 housing for greater safetyUL 508 overload endurance rated
•
• ••
Compact size Solid State Relay Timer (11 mm wide)LED Timer status indicator8 Industry standard timing functionsAC or DC Control Voltage options
•• ••
Slim 22.5 mm (wide) packageAC or DC Control Voltage optionsLED input status indicatorEnhanced surge current ratings
••
• •
Ready-to-use Solid State RelaysSlim 10 mm (single channel) & 54 mm (four channel) packagesOptional Normally Closed outputLED input status indicator
•
•
••
Up to 5 HP / 3.7 kW Motor Controller ratings3 Phase Solid State Contactor & Reversing ContactorsBuilt-in interlock circuitUltra-efficient thermal management
•
•••
3 Phase Solid State Contactor & Reversing ContactorsBuilt-in interlock circuitOvervoltage protection includedCCC Certificated
13
For more information on solid state packaging solutions visit: www.crydom.com
Application Products Application Products
Up/down film roller motor control
Sealing heating resistance control
Conveyor motor control
Up/down cylinders x film stretching
Heating resistance control
Conveyor motor control
Food-wrapping machine Shape and shrink wrapper
Bottle boxingHorizontal ring wrapper
Wrapping Machinery Group Packaging Machinery
11 12CW Series MC Series (MCBC)
5 - 20 Amps
10 - 125 Amps
7 8
109
CN Series LifePlus ED Series
EL Series Series 1
PLUG-IN MOUNT
PANEL MOUNT
•• • ••
Heavy duty SSR up to 660 VACEMC compliant (LEVEL 3)LED input status indicatorIP20 “touch safe” coverAC, DC or Universal Control Voltage options
3 - 5 Amps•
• •
•
Industry standard EMR plug-in packageLED input status indicatorDIN rail & PCB mountable sockets availableAC or DC Control Voltage options
2 Amps•• • •
Thin (6.2 mm wide) SSRsRatings of 2 Amps @ 240 VACDIN Rail sockets availableZero Voltage or Instantaneous Turn-On output
10 - 125 Amps•• •
•
AC or DC Control Voltage options“Ultra-low” input current draw Zero Voltage or Instantaneous Turn-On outputOptional Normally Closed output
25 - 90 Amps•
• ••
Microprocessor based burst fire controllerIndustry standard analog input or potentiometer controlLED output status indicatorTwo time base periods available
•• •
•
Mini-puck Solid State RelayBack-to-back SCR output Quick Connect control & output termination3.75k VAC optical isolation
Application Products Application Products
Up/down boxes motor control
Conveyor motor control
Inspection lighting control
Material feeder motor control
Vacuum equipment power supply
Up/down pallet motor control
Conveyor motor control
Wrap-around packer Food package and label inspection
Material feeder
Vacuum packaging in medical
Grouper
Palletizing Machinery Others/Accessory
25 - 50 Amps 25 - 50 Amps
17 18
1615 PowerPlus DC Series DP Series
CX Series PF Series
13 14Evolution Duals 53 Series
PCB MOUNT
•• • •
Motor Contactor & Reversing7.5 HP / 5.5 kW Motor Controller ratings Built-in interlock circuitEMC compliant (LEVEL 3)
5 Amps•• • •
SIP Solid State Relay Ratings up to 5 Amps @ 660 VACBack-to-back SCR output AC or DC Control Voltage options
10 - 100 Amps
•• • •
PWM control up to 1 KHzAC or DC Control Voltage optionsOptional IP20 “touch state”coverMOSFET output
•
• • •
Independently controlled dual output SSROptional IP20 “touch safe” coverThree Input Connector optionsLED indicator for each output channel
20 - 60 Amps
••
• •
Motor Reversing ContactorSoft Start, Soft Stop & Braking functionsBuilt-in interlock circuit LED for direction identification
25 Amps•• • •
SIP Solid State Relay Ratings up to 25 Amps @ 660 VACBack-to-back SCR outputZero Voltage or Instantaneous Turn-On output
DC OutputDC Output
Accessories
Sockets• DRS1• DRS4• DRSED• PCBSED
Protective Covers• KS100• KS101• KS300
ID Marker Strips• CNLB• CNLN• CNL2
Thermal Pads• HSP1• HSP2• HSP3
Hardware Kits• HK1• HK2• HK4• HKM1
Lug Terminals• TRM1• TRM6• TRM3/0
Filters• 1F25• 3F20• 3F20-4
Heat Sinks• HS501DR• HS301 / HS301DR• HS251• HS201 / HS201DR• HS172• HS151 / HS151DR• HS103 / HS103DR• HS101• HS073 • HS072• HS053• HS033• HS023• DIN Rail Bracket
Although there are literally thousands of individual uses for Solid State Relays and Contactors in packaging machinery and related accessory equipment, most can be grouped in the following categories:
Solid State Technology for Packaging
This encompasses the largest segment of solid state relay and contactors users in the packaging segment. It includes, but is not limited to: conveyors, feeders, vibrator motors, fans, solenoids, and valve control.
Typical examples are the use of lamps in inspection machinery which need to be turned on and off quite often, and of infrared lamps for better thermal regulation in Forming machinery.
The benefits of solid state relays in heating applications are well known and particularly in packaging machinery where plastic or film are used.
Includes power supplies, transformers, regulators, converters, signals interface, etc.; as well as any load that is not specifically for heating, lighting or motion control.
• HSP5• HSP6
Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Contactors, and specializes in custom designed solid state switching solutions for any inductive and resistive load application. Crydom is a brand of CST.
www.crydom.com
Distributed by :
CAT/CR/PK/RU© 2014 Crydom Inc., All Rights Reserved.
Specifications are subject to change without prior notice. Crydom and the Crydom logo are registered trademarks of Crydom Inc.
06/2014Rev.091216
AMERICAS
EUROPE, MIDDLE EAST& AFRICA
ASIA
United States & Canada2475 Paseo de las Americas5014 San Diego, CA 92154
Sales SupportTél. : +1 (877) 502 5500Fax : +1 (619) 210 1590sales@crydom.com
Technical SupportTél. : +1 (877) 702 7700support@crydom.com
Great China30th FloorBM Intercontinental Biz Centre, 100 Yutong Road, JingAn DistrictShanghai 200070
Sales SupportTel. : +86 (21) 2306 1648Fax : +86 (21) 2306 1601sales-cn@crydom.com
Technical Supportsupport-cn@crydom.com
South Korea7th floor of U-space 2, A Building670 Daewangpangyo-RoBundang-GuSeongnam-Si Gyeonggi-DoSouth Korea, 463-400Tel.: +82 31 601 2088Fax: +82 31 601 2099sales-cn@crydom.com
United KingdomEverdene House, Deansleigh RoadWessex Fields, Bournemouth,Dorset BH7 7DU
Sales SupportTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 416171sales-europe@crydom.com
Technical Supportsupport-europe@crydom.com
GermanyTel. : +49 (0) 180 3000 506Fax : +44 (0) 1202 416171vertrieb@crydom.com
SpainTel. : +434 902 876 217Fax : +44 (0) 1202 416171sales-europe@crydom.com
Austria & SwitzerlandTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 416171vertrieb@crydom.com
BelgiumTel. : +32 (0) 2460 4413Fax : +44 (0) 1202 416171sales-europe@crydom.com
FranceTel. : +33 (0) 1707 91389Fax : +44 (0) 1202 416171sales-europe@crydom.com
ItalyTel. : +39 (0) 2360 26567Fax : +44 (0) 1202 416171sales-europe@crydom.com
NetherlandsTel. : +31 (0) 71 582 0068Fax : +44 (0) 1202 416171sales-europe@crydom.com
Middle East, Africa& Other European CountriesTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 416171sales-europe@crydom.com
Southern & Central American CountriesTel. : +1 (877) 502 5500Fax : +1 (619) 210 1590sales@crydom.com
India and South East Asia PacificLevel 9, Raheja TowersM. G. RoadBangalore, 560 001IndiaTel.: +91 80 6792 0879sales-cn@crydom.com
top related