The Global Expert in Solid State Switching · PDF fileWeight Reduced Energy Cost ... Deep Drawing machine Sealing machine ... and valve control. Typical examples are the use of lamps

The Global Expert in Solid State Switching Technology

Manufacturers in all industry segments such as food and beverage, pharmaceutical, cosmetics, chemicals, etc. are constantly looking to optimize their packaging processes through improving efficiency and reducing costs. These goals are achievable through the implementation of packaging systems that are innovative, fast, reliable and cost effective.

Packaging machinery is known for its advanced technology, due to the high level of automation of packaging lines and the intensive use of advanced electronic components. In every case, each component has to meet very strict requirements specific to each industry.

Whatever products need to be packaged and whichever the materials used, Crydom Solid State Relays and Contactors are ideal solutions for heating and AC or DC motor control increasing the efficiency of reliability of high performance packaging equipment including Filling & Closing Machinery, Form-Fill-Seal Machinery, Wrapping Machinery, and Palletizing Machinery.

Our more than 40 years of experience providing top notch switching solutions and support make Crydom the indisputable global expert in solid state relay technology and preferred choice of companies all over the world.

Efficient & Reliable Packaging Solutions

Crydom is a Supplier Member of PMMI, the Association for Packaging and Processing Technologies

DEC

No acoustical noise when the output contacts change states.

No moving parts. Therefore, no mechanical wear and tear on the output contact, ideal for repetitive applications.

SSRs are not susceptible to erratic or unreliable operation when operating under tough environments.

SSRs do not generate sparks or electric arcs and do not bounce either electrically or mechanically.

Instantaneous turn-on Solid State Relays and Contactors respond to a control signal in less than 100 μs.

SSRs can be switched by digital systems such as μC based systems, or driven by limit switches and sensors.

Suitable for mounting in either vertical or horizontal position, "dead bug" position or adjacent mounting.

Solid state technology allows smaller constraints compared to electromechanical products.

Include the forward/reverse and interlock control, reducing overall installed cost of the equipment.

Magnetic fields have little effect on SSRs since they don’t use a magnetic coil to switch the load.

SSRs are much lighter than equivalent electromechanical versions; up to 70%.

Energy savings are achieved from switching the load off when it is not required; ensuring maximum efficiency.

Long Life

FastSwitching

EmbeddedControlFunctions

Space SavingCompact Package

MagneticNoise Immunity

PositionInsensitive

Shock &VibrationResistant

Compatibilitywith ControlSystems

Ideal forHarshEnvironments

Quiet Operation

kgReduced Weight

Reduced Energy Cost

Why use Solid State Technology?

Zero voltage turn-on and zero current turn-off allow for minimum electrical disturbances generated.

MinimumElectricalNoise

Solid State Relays and Contactors require very little input power "coil current" to switch large loads.

Low Power Consumption

Questions?Call or e-mail:

Tel.: +1 (877) 502 5500 Tel.: +44 (0) 1202 416170e-mail: [email protected] e-mail: [email protected]

EMEAAmericas Tel.: +86 (21) 2306 1648e-mail: [email protected]

Asia

Application Products Application Products

PLC Signal Interface

Conveyor motor control

Closing heating resistance control

Power vibrator motor control

Heating resistance control

Up/down moulder motor control

Cover sheet heating resistance control

Up/down cover sheet motor control

Filling Machine Thermoforming machine

Deep Drawing machine

Sealing machine

Vertical Bagger

Filling & Closing Machinery Form-Fill-Seal Machinery

3 - 12 Amps 6 Amps

10 - 30 Amps3 - 8 Amps

4.8 - 7.6 Amps2.4 - 4.2 Amps5 6

1 2

43

SeriesOne DR SeriesOne DR TIMER

DRA Series CKR Series

DRA Series Contactors SOLICON DRC Series

DIN RAIL MOUNT

•• • •

11 mm or 18 mm wide SSRsAC or DC Control Voltage optionsIP20 housing for greater safetyUL 508 overload endurance rated

•

• ••

Compact size Solid State Relay Timer (11 mm wide)LED Timer status indicator8 Industry standard timing functionsAC or DC Control Voltage options

•• ••

Slim 22.5 mm (wide) packageAC or DC Control Voltage optionsLED input status indicatorEnhanced surge current ratings

••

• •

Ready-to-use Solid State RelaysSlim 10 mm (single channel) & 54 mm (four channel) packagesOptional Normally Closed outputLED input status indicator

•

•

••

Up to 5 HP / 3.7 kW Motor Controller ratings3 Phase Solid State Contactor & Reversing ContactorsBuilt-in interlock circuitUltra-efficient thermal management

•

•••

3 Phase Solid State Contactor & Reversing ContactorsBuilt-in interlock circuitOvervoltage protection includedCCC Certificated

13

For more information on solid state packaging solutions visit: www.crydom.com

Application Products Application Products

Up/down film roller motor control

Sealing heating resistance control

Conveyor motor control

Up/down cylinders x film stretching

Heating resistance control

Conveyor motor control

Food-wrapping machine Shape and shrink wrapper

Bottle boxingHorizontal ring wrapper

Wrapping Machinery Group Packaging Machinery

11 12CW Series MC Series (MCBC)

5 - 20 Amps

10 - 125 Amps

7 8

109

CN Series LifePlus ED Series

EL Series Series 1

PLUG-IN MOUNT

PANEL MOUNT

•• • ••

Heavy duty SSR up to 660 VACEMC compliant (LEVEL 3)LED input status indicatorIP20 “touch safe” coverAC, DC or Universal Control Voltage options

3 - 5 Amps•

• •

•

Industry standard EMR plug-in packageLED input status indicatorDIN rail & PCB mountable sockets availableAC or DC Control Voltage options

2 Amps•• • •

Thin (6.2 mm wide) SSRsRatings of 2 Amps @ 240 VACDIN Rail sockets availableZero Voltage or Instantaneous Turn-On output

10 - 125 Amps•• •

•

AC or DC Control Voltage options“Ultra-low” input current draw Zero Voltage or Instantaneous Turn-On outputOptional Normally Closed output

25 - 90 Amps•

• ••

Microprocessor based burst fire controllerIndustry standard analog input or potentiometer controlLED output status indicatorTwo time base periods available

•• •

•

Mini-puck Solid State RelayBack-to-back SCR output Quick Connect control & output termination3.75k VAC optical isolation

Application Products Application Products

Up/down boxes motor control

Conveyor motor control

Inspection lighting control

Material feeder motor control

Vacuum equipment power supply

Up/down pallet motor control

Conveyor motor control

Wrap-around packer Food package and label inspection

Material feeder

Vacuum packaging in medical

Grouper

Palletizing Machinery Others/Accessory

25 - 50 Amps 25 - 50 Amps

17 18

1615 PowerPlus DC Series DP Series

CX Series PF Series

13 14Evolution Duals 53 Series

PCB MOUNT

•• • •

Motor Contactor & Reversing7.5 HP / 5.5 kW Motor Controller ratings Built-in interlock circuitEMC compliant (LEVEL 3)

5 Amps•• • •

SIP Solid State Relay Ratings up to 5 Amps @ 660 VACBack-to-back SCR output AC or DC Control Voltage options

10 - 100 Amps

•• • •

PWM control up to 1 KHzAC or DC Control Voltage optionsOptional IP20 “touch state”coverMOSFET output

•

• • •

Independently controlled dual output SSROptional IP20 “touch safe” coverThree Input Connector optionsLED indicator for each output channel

20 - 60 Amps

••

• •

Motor Reversing ContactorSoft Start, Soft Stop & Braking functionsBuilt-in interlock circuit LED for direction identification

25 Amps•• • •

SIP Solid State Relay Ratings up to 25 Amps @ 660 VACBack-to-back SCR outputZero Voltage or Instantaneous Turn-On output

DC OutputDC Output

Accessories

Sockets• DRS1• DRS4• DRSED• PCBSED

Protective Covers• KS100• KS101• KS300

ID Marker Strips• CNLB• CNLN• CNL2

Thermal Pads• HSP1• HSP2• HSP3

Hardware Kits• HK1• HK2• HK4• HKM1

Lug Terminals• TRM1• TRM6• TRM3/0

Filters• 1F25• 3F20• 3F20-4

Heat Sinks• HS501DR• HS301 / HS301DR• HS251• HS201 / HS201DR• HS172• HS151 / HS151DR• HS103 / HS103DR• HS101• HS073 • HS072• HS053• HS033• HS023• DIN Rail Bracket

Although there are literally thousands of individual uses for Solid State Relays and Contactors in packaging machinery and related accessory equipment, most can be grouped in the following categories:

Solid State Technology for Packaging

This encompasses the largest segment of solid state relay and contactors users in the packaging segment. It includes, but is not limited to: conveyors, feeders, vibrator motors, fans, solenoids, and valve control.

Typical examples are the use of lamps in inspection machinery which need to be turned on and off quite often, and of infrared lamps for better thermal regulation in Forming machinery.

The benefits of solid state relays in heating applications are well known and particularly in packaging machinery where plastic or film are used.

Includes power supplies, transformers, regulators, converters, signals interface, etc.; as well as any load that is not specifically for heating, lighting or motion control.

• HSP5• HSP6

Crydom, global expert in solid state switching technology, combines technology and innovation to provide customers a wide range of standard Solid State Relays and Contactors, and specializes in custom designed solid state switching solutions for any inductive and resistive load application. Crydom is a brand of CST.

www.crydom.com

Distributed by :

CAT/CR/PK/RU© 2014 Crydom Inc., All Rights Reserved.

Specifications are subject to change without prior notice. Crydom and the Crydom logo are registered trademarks of Crydom Inc.

06/2014Rev.091216

AMERICAS

EUROPE, MIDDLE EAST& AFRICA

ASIA

United States & Canada2475 Paseo de las Americas5014 San Diego, CA 92154

Sales SupportTél. : +1 (877) 502 5500Fax : +1 (619) 210 [email protected]

Technical SupportTél. : +1 (877) 702 [email protected]

Great China30th FloorBM Intercontinental Biz Centre, 100 Yutong Road, JingAn DistrictShanghai 200070

Sales SupportTel. : +86 (21) 2306 1648Fax : +86 (21) 2306 [email protected]

Technical [email protected]

South Korea7th floor of U-space 2, A Building670 Daewangpangyo-RoBundang-GuSeongnam-Si Gyeonggi-DoSouth Korea, 463-400Tel.: +82 31 601 2088Fax: +82 31 601 [email protected]

United KingdomEverdene House, Deansleigh RoadWessex Fields, Bournemouth,Dorset BH7 7DU

Sales SupportTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 [email protected]

Technical [email protected]

GermanyTel. : +49 (0) 180 3000 506Fax : +44 (0) 1202 [email protected]

SpainTel. : +434 902 876 217Fax : +44 (0) 1202 [email protected]

Austria & SwitzerlandTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 [email protected]

BelgiumTel. : +32 (0) 2460 4413Fax : +44 (0) 1202 [email protected]

FranceTel. : +33 (0) 1707 91389Fax : +44 (0) 1202 [email protected]

ItalyTel. : +39 (0) 2360 26567Fax : +44 (0) 1202 [email protected]

NetherlandsTel. : +31 (0) 71 582 0068Fax : +44 (0) 1202 [email protected]

Middle East, Africa& Other European CountriesTel. : +44 (0) 1202 416170Fax : +44 (0) 1202 [email protected]

Southern & Central American CountriesTel. : +1 (877) 502 5500Fax : +1 (619) 210 [email protected]

India and South East Asia PacificLevel 9, Raheja TowersM. G. RoadBangalore, 560 001IndiaTel.: +91 80 6792 [email protected]