TabTop7.4 Android 4.0.4 Upgrade Instructions_MH_RK_2.0
Post on 27-Oct-2015
54 Views
Preview:
DESCRIPTION
Transcript
1
2
How to download & Install
Android 4.0.4 (ICS) on
TabTop7.4
3
Step 0
Please take the backup of all your important data before
installing Android 4.0.4 on your TabTop, otherwise you
may lose your important data such as documents,
videos, pictures etc. Connect Usb cable to the TabTop & then click on "USB Connected"
4
Step 0
Then click on "Turn on USB storage"
5
Step 0
Now system will show the following window . Click on "Open
folder to view files"
6
Step 0
Now copy and save your data from TabTop drive to any other
external storage device or your computer hard disk.
9
Download the 4.0.4 image file on your computer
Step 2.2
10
Step 2.3
Download the update tool on your computer
11
Click on TabTop-7.4 Update Tool and Instruction Guide
Step 2.4
12
Save file on your desktop
Step 2.5
13
Wait for the download to start
Step 2.6
14
Wait till download is completed
Step 2.7
15
Open the folder where the file is saved
Step 3.1
16
Extract the files of the update tool on your desktop
Step 3.2
17
1. Then go inside the extracted files and double click on the
LiveSuitPack_version1.06_20100708
Select Yes to let the program make the changes to your computer
2. Double Click LiveSuitPack_version_1.07_2011026
3. Double Click on LiveSuit.exe file.
Step 3.3
18
A window will open up welcoming you to Live Suit.
Select Yes
Step 4.1
19
Then select "format"
Step 4.2
20
Select Next.
Step 4.3
21
Step 4.4
Select Yes for new image file from your desktop an open it
22
Open “Milagrow 4.0.4Software.final”
Step 4.5
23
Step 4.6
Now click on Finish
24
Step 5.1 Installing Android 4.0.4 on the TabTop
1.Now power off your TabTop 7.4 completely.
2.Put USB cable in the TabTop, while keeping the back button of
the TabTop pressed.
3.Then connect the other end of the USB wire to your computer.
25
Step 5.2
A window of live suit will open up on your desktop
26
Step 5.3
1.Select Yes on the desktop and then select "format upgrade" (This
is the one which is not marked as recommended option. So be
careful in the selection)
2.Then again press YES
27
Step 5.4
Wait till the process ends
28
Step 5.5
Now the window should show update success.
29
Step 6
1.Remove the USB cable and then power on the TabTop 7.4
2.The Tabtop will show the message –
"Make yourself at home."
Select okay.
3.Leave the TabTop 7.4 alone for 15 minutes. Slowly all the
applications will configure in the new firmware
4.Now your TabTop 7.4 is ready to use with the Android 4.0.4
30
In case the process is not working then please
perform the following check…….
31
Step 7.1: Download the file, from www.winmd5.com:
Step 7 Process to verify the MD5sum of the downloaded
32
Step 7.2: Run the winmd5.exe file.
Step 7 Process to verify the MD5sum of the downloaded
33
Step 7.3: The below dialogue box appears after running the
winmd5.exe file. Now click on browse.
Step 7 Process to verify the MD5sum of the downloaded
34
Step 7.4: After computing the current file's checksum value is
displayed.
Step 7 Process to verify the MD5sum of the downloaded
35
Step 7.5: Enter checksum value that is found in the webite or the
.md5 file and click on verify.
Step 7 Process to verify the MD5sum of the downloaded
36
Step 7.6: If the file is not corrupted and has been downloaded
without any virus, the original and the current values match.
Step 7 Process to verify the MD5sum of the downloaded
37
Thank You
top related