SAMPLE N° 186033 - Meble-Bocian · PDF filevia ca' leoncino, 2 31030 castello di godego (tv) italia
Post on 21-Feb-2018
214 Views
Preview:
Transcript
Date received: 12/11/14
Date of issue: 13/01/15
Report consists of 10 test reports.
Sample name: BI
SAMPLE N° 186033
List performed tests:1. Safety requirements EN 16139:2013+AC:2013 2. Seat and back static load test EN 1728:2012+AC:2013 3. Vertical load on back rest EN 1728:2012+AC:2013 4. Seat and back fatigue test EN 1728:2012+AC:2013 5. Seat front edge durability test EN 1728:2012+AC:2013 6. Leg forward static load test EN 1728:2012+AC:2013 7. Leg sideways static load test EN 1728:2012+AC:2013 8. Seat impact test EN 1728:2012+AC:2013 9. Back impact test EN 1728:2012+AC:2013 10. Stability - EN 1022:2005
OMP S.R.L. VIA CA' LEONCINO, 2 31030 CASTELLO DI GODEGO (TV) ITALIA
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
Page 1 of 2
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
Defects before testing: None
Overall dimensions: 490 x 530 x 760 (h) mm
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Date of issue: 13/01/15
Sample name: BI
SAMPLE N° 186033
Page 2 of 2
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
Side view Rear view
Bottom view
Sample weight: Not determined
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
TEST REPORT
186033 / 1Date received: 12/11/14Date of test: 13/11/14Date of issue: 13/01/15Sample name: BI
Safety requirements EN 16139:2013+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Safety requirements clause 4Remarks Tecnico 2:Statement checked
Corner and edges in contact with the users:Yes Note:• Absence of sharp edges and corners
Edges on the handles:
Handles not present• Absence of sharp edges and corners in the direction of the force
Other edges:Yes• Absence of corners
Accessible hollow components:Yes• The ends of hollow components are closed or capped
Movable and adjustable parts:
Movable and adjustable parts!not present
• It shall not be possible for any movable and adjustable part of the!chair to come operate unintentionally.
Connections between parts of the structure:
No• It shall not be possible for any load bearing part of the seating!to come loose unintentionally
Parts which are lubricated:
Lubricated parts not present• All the parts which are lubricated shall be designed to protect users
Shear and squeeze points between movable parts ≥ 7 mm ≤ 18 mm:
Mechanism not present• Shear and squeeze points under influence of powered mechanism• Shear and squeeze points during normal use and during normal!movements and actions No
Conformity to clauses 4.1 and 4.2 of standard EN 16139:2013: YES
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 2Date received: 12/11/14Date of test: 14/11/14Date of issue: 13/01/15Sample name: BI
Seat and back static load test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Seat and back static load test, clause 6.4
Back force!N
Number!of cycles Remarks
EN 16139
828
SI NO
Test results:
a) Rotture di componenti o giunzioni
Seat load!N
2.000 700 10 No defects
Seat front edge static load, clause 6.5
Number!of cycles Remarks
x
xb) Allentamenti di giunzioni xc) No elemento strutturale importante notevolm. def.d) Funzioni inalterate dopo rimoz. carichi x
ApparecchiaturaSeat load!
N
1.600 10 No defects
Note:The test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 3Date received: 12/11/14Date of test: 14/11/14Date of issue: 13/01/15Sample name: BI
Vertical load on back rest EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Vertical static load on back rest clause 6.6
Downwards!force!
NNumber of !
applications Remarks
EN 16139
SI NOTest results:
a) Rotture di componenti o giunzioni
Seat!load!
Nx
x
1.800 900 10 No defects b) Allentamenti di giunzioni x
c) No elemento strutturale importante notevolm. def.Note: d) Funzioni inalterate dopo rimoz. carichi xThe test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
Apparecchiatura
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 4Date received: 12/11/14Date of test: 17/11/14Date of issue: 13/01/15Sample name: BI
Seat and back fatigue test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Seat and back fatigue test, clause 6.17
Back force!N
Number!of cycles Remarks
EN 16139
601
SI NOTest results: a) Rotture di componenti o giunzioni x
x
b) Allentamenti di giunzioniSeat force!
N
x
c) No elemento strutturale importante notevolm. def.1.000 300 200.000 No defects d) Funzioni inalterate dopo rimoz. carichi x
Note: ApparecchiaturaThe test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 5Date received: 12/11/14Date of test: 04/12/14Date of issue: 13/01/15Sample name: BI
Seat front edge durability test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Seat front edge durability test clause 6.18
Seat force !N
Number of !cycles Remarks
EN 16139
573
SI NOTest results:a) Rotture di componenti o giunzioni
Points of !application
x
x
b) Allentamenti di giunzionix
100 mm back from!the front edge 800 100.000 No defects c) No elemento strutturale importante notevolm. def.
d) Funzioni inalterate dopo rimoz. carichi
Note:
x
ApparecchiaturaThe test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 6Date received: 12/11/14Date of test: 10/12/14Date of issue: 13/01/15Sample name: BI
Leg forward static load test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Leg forward static load test clause 6.15
Balancing!seat force!
NNumber!of cycles Remarks
EN 16139
SI NO
Test results:a) Rotture di componenti o giunzioni x
xb) Allentamenti di giunzioni xc) No elemento strutturale importante notevolm. def.
Forward!horizontal force!
N d) Funzioni inalterate dopo rimoz. carichix
620 1.800 10 No defects
ApparecchiaturaNote:The test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 7Date received: 12/11/14Date of test: 10/12/14Date of issue: 13/01/15Sample name: BI
Leg sideways static load test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Leg sideways static load test clause 6.16
Balancing!seat force!
NNumber!of cycles Remarks
EN 16139
SI NO
Test results:a) Rotture di componenti o giunzioni x
xb) Allentamenti di giunzioni xc) No elemento strutturale importante notevolm. def.
Sideways!horizontal force!
N d) Funzioni inalterate dopo rimoz. carichix
580 1.800 10 No defects
ApparecchiaturaNote:According to EN 1728:2012, horizontal force has been reduced from 760 N to 580 N, to avoid tipping.
The test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 8Date received: 12/11/14Date of test: 10/12/14Date of issue: 13/01/15Sample name: BI
Seat impact test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Seat impact test clause 6.24
Height!of drop!
mmNumber!of drops Remarks
EN 16139
SI NO
Test results:a) Rotture di componenti o giunzioni x
xb) Allentamenti di giunzioni xc) No elemento strutturale importante notevolm. def.
Mass of!impactor!
kgd) Funzioni inalterate dopo rimoz. carichi
x
25 300 10 No defects
ApparecchiaturaNote:The test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 9Date received: 12/11/14Date of test: 10/12/14Date of issue: 13/01/15Sample name: BI
Back impact test EN 1728:2012+AC:2013
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Back impact test clause 6.25
Mass of!impactor!
kgNumber!of cycles Remarks
EN 16139
SI NO
Test results:a) Rotture di componenti o giunzioni x
xb) Allentamenti di giunzioni xc) No elemento strutturale importante notevolm. def.
Angle!°
d) Funzioni inalterate dopo rimoz. carichix
48 6,5 10 No defects
ApparecchiaturaNote:The test has been carried out according to table 1 of EN 16139:2013, level L2 - extreme.
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
TEST REPORT
186033 / 10Date received: 12/11/14Date of test: 10/12/14Date of issue: 13/01/15Sample name: BI
Stability - EN 1022:2005
OMP S.R.L.!VIA CA' LEONCINO, 2!31030 CASTELLO DI GODEGO (TV)!ITALIA
CATAS S.p.A. Iscr. Reg. Imprese Udine nr. iscr. C.F. 01818850305 Reg. Impr. UD 20663 P. IVA : 01818850305 C.Soc. € 1.003.650,00 i.v.
centro ricerche-sviluppo e laboratori prove settori legno-arredo, ambiente e alimenti
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com
Filiale: Via Braille, 5 20851 Lissone MB Tel. 039.464567 Fax 039.464565 e-mail: lissone@catas.com
Type of chair: fixed geometry
: 20 N does not overturn
Minimum horizontal force for rearwards overturning of fixed back chair: 163 N
Forwards overturning Horizontal force
Rearwards overturning
: 163 N does not overturn Fixed back chair Horizontal force
Tilting chair in the rearmost position: /
N does not overturn
Loading discs on the seat
Sideways overturning for chairs with arms: / Horizontal force
Sideways overturning for chairs without arms: 20 Horizontal force
Forwards overturning for chairs with footrest: / Horizontal force
Test passed
pag. 1/1
The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer.
This document is validated by digital signature and time stamping in accordance with the Italian laws and the European Directives which regulate the electronic signature systems.
Managing Director Dr. Andrea Giavon
top related