SAFTY CONSIDERATIONS IN AUTOMOBILES USING MULTIPLE SENSORS

Post on 19-Jun-2015

231 Views

Category:

Engineering

6 Downloads

Preview:

Click to see full reader

DESCRIPTION

SAFTY CONSIDERATIONS IN AUTOMOBILES USING MULTIPLE SENSORS In this miniproject an automobile systems is designed in order to address safety features for preventive measures Viz: Fuel quantity Fuel leakage Engine coolant replacement/refilling using Fluid level sensor A general sub system consist of three sensors used to safe guard two basic operations like, Fuel monitoring Engine temperature detector

Transcript

Guided by

AJAL A JAssistant Professor-Dept. of ECE Universal Engineering college

SAFTY CONSIDERATIONS IN SAFTY CONSIDERATIONS IN AUTOMOBILES USING MULTIPLE AUTOMOBILES USING MULTIPLE

SENSORSSENSORS

In this miniproject an automobile systems is designed in order to address safety features for preventive measures Viz:

Fuel quantity Fuel leakage Engine coolant replacement/refilling using

1.Fluid level sensor

A general sub system consist of three sensors used to safe guard two basic operations like,• Fuel monitoring• Engine temperature detector

Our project was broadly classified into six phases:

1.Idea development.2.Component identification.3.Software identification.4.Bread board verification of designed circuit.5.Microcontroller study and programming.6.PCB fabrication and soldering.

ORGANISATION OF PROJECT

Micro

controller8

051

Micro ProcessorPIC16F877A

SOFTWARE IMPLIMENTATION

HARDWARE IMPLIMENTATION

Eg: used LM 35 as

Temperature sensor

Eg: used RTD as

Temperature sensor

• Fuel monitoring

• Engine Temperature monitoring

• Coolant refilling/Replacing

• Coolant pipe leakage detection

ENGINE KEY

OFFON

Coolant temperature50 DEG CFuel Level 70 %

ONOFFFuel

100 %

0 %

Fuel level

ENGINE KEY

Fuel Level Low

ENGINE KEY

ONcoolant

Coolant level

100 %

0 %

Coolant level low

ONOFF

ENGINE KEY

0 0 C

50 0 C

Check coolantActive/inactive

ONOFF

ENGINE

0 0 C

50 0 C

Coolant pipe leakage

CIRCUIT DIAGRAM

Since the hardware complexity is much lower in our miniproject with PIC 16F877A. The delay involved will be much lower and hence negligible.

However the delay in the program execution loop = 1000ms This delay is provided to protect the out put produced and avoid overlapping effects

Data acquisition

*Problem analyzing &solving

* Provide security

Details of Variable Resistance type sensor

Details of Float type level switches

Details of RTD (resistance-temperature detector ) sensor

Try to include research papers Try to include research papers

• A Text book of automobile engineering volume1: PRITAM SINGH GILL,

• A Text book of automobile engineering: K.K RAJUT, first edition 2007,

• Automatic engineering: Dr. KIRPAL SING, first edition 1969,

• A course in electrical, electronics measurements and instrumentation : A.K SAWHNEY,first edition 1973

top related