SAES-J-002
Post on 06-Nov-2015
192 Views
Preview:
DESCRIPTION
Transcript
Previous Issue: 26 June 2010 Next Planned Update: 1 January 2012
Revised paragraphs are indicated in the right margin Page 1 of 1
Primary contact: Juaib, Mohammed Khalifah on 966-3-8730222
CopyrightSaudi Aramco 2010. All rights reserved.
Engineering Standard SAES-J-002 12 December 2010
Technically Acceptable Instrument Manufacturers
Document Responsibility: Instrumentation Standards Committee
Saudi Aramco DeskTop Standards Table of Contents 1 Scope............................................................. 2
2 Conflicts and Deviations................................. 2
3 References..................................................... 2
4 Definitions....................................................... 4
5 General........................................................... 4
6 Technically Acceptable Instruments............... 6
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 2 of 2
1 Scope
This Standard identifies acceptable manufacturers for instrumentation products.
The Standard does not apply to replacement-in-kind or purchasing procedures
associated with instrument materials for replenishment of SAMS stock.
2 Conflicts and Deviations
2.1 Any conflicts between this standard and other applicable Saudi Aramco
Engineering Standards (SAESs), Materials System Specifications (SAMSSs),
Standard Drawings (SASDs), or industry standards, codes, and forms shall be
resolved in writing by the Company or Buyer Representative through the
Manager, Process & Control Systems Department, Saudi Aramco, Dhahran.
2.2 Direct all requests to deviate from this standard in writing to the company or
buyer representative, who shall forward such requests to the Manager, Process
and Control Systems Department of Saudi Aramco, Dhahran.
3 References
The following is a summary of the Saudi Aramco documents and industrial standards
that have been mentioned within this standard:
* Saudi Aramco References
Saudi Aramco Engineering Standards
SAES-J-200 Pressure
SAES-J-400 Temperature
SAES-J-502 Analyzer Shelters
SAES-J-904 FOUNDATION fieldbus (FF) Systems
Saudi Aramco Materials System Specifications
34-SAMSS-117 Turbine Flow Meters
34-SAMSS-118 Positive Displacement Meters
34-SAMSS-318 Automatic Tank Gauging Equipment
34-SAMSS-319 Radar Tank Gauging Equipment
34-SAMSS-511 Chromatographs
34-SAMSS-512 Oxygen Analyzers
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 3 of 3
34-SAMSS-514 Combustible Gas and Hydrogen Sulphide
Monitors
34-SAMSS-515 Moisture Analyzers
34-SAMSS-517 Density Meters
34-SAMSS-611 Safety Relief Valves Conventional and Balanced
Types
34-SAMSS-612 Safety Relief Valves Pilot Operated Types
34-SAMSS-619 Burner Management Systems for Watertube
Boilers
34-SAMSS-623 Programmable Controller Based ESD Systems
34-SAMSS-624 Wellhead Control, Monitoring and Shutdown
Systems
34-SAMSS-625 Vibration, Axial Position and Bearing
Temperature Monitoring Systems
34-SAMSS-634 Local ZV Shutdown Cabinets and Smart ZV
Systems
34-SAMSS-711 Control Valves - General Services
34-SAMSS-716 Pneumatic Actuators On-Off Service
34-SAMSS-717 Hydraulic Valve Actuators
34-SAMSS-718 Electric Motor Operated Valve Actuators
34-SAMSS-815 Annunciators
34-SAMSS-820 Instrument Control Cabinets - Indoor
34-SAMSS-821 Instrument Control Cabinets - Outdoor
34-SAMSS-830 Programmable Logic Controller
34-SAMSS-831 Instrumentation for Packaged Units
34-SAMSS-913 Instrumentation and Thermocouple Cable
Saudi Aramco Standard Drawings
AB-036019 Thermowell Assembly and Detail
AB-036094 Standard Orifice Plate
AC-036413 Orifice Flange Assembly, Raised Face
AB-036414 Orifice Flange Assembly, Ring Joint
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 4 of 4
4 Definitions
Terms shown in bold font within this document are defined below:
Approval: Written authorization by the Manager, Process & Control Systems
Department, Saudi Aramco, Dhahran.
Acceptable: Approval is not required to place a purchase order for the product. After
the order has been placed, the supplier of this product must ensure that he complies
with all aspects of the purchasing contract (e.g., must meet the Saudi Aramco Materials
System Specification).
License agreement: A contract between a supplier and an owner of rights to an
equipment design, allowing a supplier to either (1) assemble the equipment using all
the pieces provided by the design owner or (2) assemble the equipment using a
combination of pieces provided by the design owner and pieces manufactured by the
licensee to the design owner's detailed drawings/specifications. The contract between
the licensor and licensee would (1) require the licensee to follow the licensor
manufacturing procedures and be routinely audited by the licensor for compliance and
(2) require the equipment to be marketed and labeled using the licensor's brand name.
Made: Created from raw materials and/or assembled by the manufacturer.
Manufacturer: Can be either (1) the owner of the brand name of the equipment or
(2) a licensee that has a license agreement.
SAMSS: "Saudi Aramco Materials System Specification".
Supplier: The person/company, etc., who is responsible to provide the equipment to
Saudi Aramco.
5 General
5.1 Procurement of a product made by a manufacturer not listed in Section 6 of
this Standard is not allowed without approval. Requests for approval by the
Instrumentation Standards Committee Chairman of an alternate
manufacturer must be supported by documentation identifying how the
alternate manufacturer would better serve Saudi Aramco over the
manufacturers listed in this standard.
Commentary Note:
If the request to procure from an alternate manufacturer is not approved, the approval authority is under no obligation to present the reasons for the refusal.
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 5 of 5
5.2 The manufacturer listings within Section 6 shall be interpreted in the following
manner:
5.2.1 Manufacturer is listed with the word "None" as a "Limitation":
All products from the manufacturer in the given category are
acceptable provided they meet the purchase specifications and the
applicable SAMSS. This does not include material of construction
which must be suitable for the specific application.
5.2.2 Manufacturer is listed with a "Limitation": Only the product that meets
the "Limitation" is acceptable. If noted as being manufactured "Under
License", only products made under the terms of the license agreement
are acceptable.
5.2.3 Manufacturer is listed with a specific "Location": Only products made
in the specific location(s) or area(s) are acceptable.
5.3 For instrumentation purchases from manufacturers that are not listed in this
standard, a request for technical evaluation, with justifications, shall be
submitted in writing to the General Supervisor, Process Instrumentation
Division, P&CSD. The Instrumentation Unit/PID/P&CSD will evaluate the
subject instrument product for technical acceptability, and shall inform the
requestor in writing of the result. Only after the instrument has been identified
as technically acceptable, and the manufacturer's facility approved by Vendor
Inspection, can the purchase order be placed. These instrument products may or
may not be added to the technically acceptable manufacturer's list.
6 Technically Acceptable Instruments
100 Flow
111 Flow Transmitters
D/P Transmitters
See Category 211 - Pressure and Differential Pressure Transmitters
112 Flow Indicators
112.1 Equipment Description: Flowmeter, Variable Area, Rotameters
(9COM - 6000002916)
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 6 of 6
112.2 Flow Sight Glasses
(9COM - 6000002744)
Refer to SAP System
112.3 D/P Gauges
See Category 217 - Differential Pressure Gauges
113 Flow Switches
113.1 D/P Switches (9COM- 6000002830)
See Category 213 - Pressure and Differential Pressure Switches
113.2 Target Switches (9COM- 6000002831)
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ITT-McDonnell and Miller 10019365 Chicago, US
SOR, Inc. 10021774 Kansas, US
SOR Europe 10001487 SW, UK
Magnetrol 30003796 Zele, Belgium
15 Orifice Assemblies
115.1 Orifice Plates and Flanges
(9COM- 6000002792) - Orifice; Assembly: Plate; Flange; Sealing Ring
(9COM- 6000002793) - Orifice; Plate; ASTM A182/A240;
Mandatory requirements:
For orifice plates - Std. Dwg. AB-036094
For RF orifice flanges - Std. Dwg. AC-036413
For RJ orifice flanges - Std. Dwg. AB-036414
Refer to SAP System
115.2 Equipment Description: Orifice Fittings Retractable, Single and Dual Chamber
(9COM- 6000010784)
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 7 of 7
116 Equipment Description: Flow Meter: Venturi Tube
(9COM- 6000007215)
Refer to SAP System
117 Equipment Description: Flowmeter; Turbine; In-Line for Process Metering
(9COM- 6000002775)
Specification: 34-SAMSS-117; IR342900
Refer to SAP System
118 Flowmeter; Positive Displacement for Process Metering; Bi-Rot
(9COM- 6000002722)
Specification: 34-SAMSS-118; IR343000
Refer to SAP System
120 Flowmeter; Annubar; Pitot Tube
(9COM- 6000002677)
Refer to SAP System
121 Flowmeter; Magnetic
(9COM- 6000002735)
Refer to SAP System
122 Ultrasonic Flowmeters*
122.1 Flow Meter: Ultrasonic; Liquid, Gas and Flare Line Service
(9COM- 6000002738)
* P&CSD pre-approval is required for clamp-on type
Refer to SAP System
122.2 Flowmeter; Multipath Ultrasonic for Process Metering; Gas Service
(9COM- 6000002777)
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 8 of 8
123 Flowmeter; Vortex; Vortex Shedding
(9COM- 6000002739)
Refer to SAP System
126 Thermal Flowmeters
(9COM- 6000002736) - Flow Meter/Switch: Thermal
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Fluid Components International 30002423 San Marcos, CA, US
Brooks Instruments 30000079 Veenendaal, NL
Kurz Instruments 30003794 Monterey, CA, US
127 Flow Nozzles
(9COM- 6000002740) - Flow Nozzle
Refer to SAP System
128 Flowmeter; Coriolis Mass
(9COM- 6000002915)
Refer to SAP System
129 Specialty Flowmeters
129.1 Flowmeter; DP Cone Type
(9COM- 6000002742)
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
McCrometer 30001590 Hemet, US
Cameron Measurement Systems/Hitol Co., Ltd.
30005159 Seoul, KR DP Cone meters only (NuFlo)
200 Pressure
211 Pressure and Differential Pressure Transmitters
(9COM- 6000002850) - Transmitter: Flow
(9COM- 6000002851) - Transmitter: Pressure
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 9 of 9
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Emerson- Process Management 30004511 10005275 30002389
Wessling, DE Worcester, GB Chanhassen, US
Foxboro Canada, Inc. Foxboro Company Foxboro Great Britain, Ltd.
10016488 10018363 10003897
Calgary, CA Foxboro, US Crawley, GB
Honeywell, Inc. 10019010 Phoenix, US
ABB instrumentation SPA ABB Automation Products Gmbh ABB Kent-Taylor, Inc. ABB Automation Instrumentation
10004522 10015036 10018670 10018650
Lenno, IT Minden, DE Rochester, US Warminster, US
Yokogawa Corp. Yokogawa Electric Corp.
10023418 10001950
Suger Land, US Musashino City, JP
Saudi Fal Co. (Emerson Process Management)
10007457 Al-Khobar, SA
212 Pressure Gauges
(9COM- 6000002754) - Indicator: Pressure
Specification: Mandatory requirements are specified in SAES-J-200.
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Ametek, Inc. (U.S. Gauge PMT) 10016194 Feasterville, PA US
WIKA Alexander Wiegand Gmbh WIKA Instrument Corporation Wika Middle East FZE
10032628 10023327 10029526
Klindgenberg, DE Lawrenceville, USA Dubai, AE
Dresser Al-Rushaid Valve & Instrument/ Ashcroft
30000428 Jubail
Dresser Instrument Division, Ashcroft 10017721 Stratford, US
Dwyer Instruments, Inc. (Magnehelic) 10017797 Michigan City, US
213 Pressure and Differential Pressure Switches
(9COM- 6000002830) - Switch: Differential Pressure
(9COM- 6000002834) - Switch: Pressure
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
WIKA Alexander Wiegand Gmbh Wika Middle East FZE
10032628 10029526
Klindgenberg, DE Dubai, AE
Barton Instrument Systems 30001183 Bognor Regis, UK
Custom Control Sensors, Inc. 10004389 Swindon, UK
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 10 of 10
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Mercoid Corp. 10017798 Michigan City, US
SOR Europe 10001487 SW, UK
SOR, Inc. 10021774 Lenexa, KS, US
United Electric Controls 10022325 Watertown, MA, US
214 Multivariable Transmitters
(9COM- 6000002926) - Transmitters Multivariable
Refer to SAP System
215 Remote Seals
(9COM 6000002693) - Chemical Seal
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Ametek, Inc. (U.S. Gauge PMT) 10016194 Feasterville, US
Barton Instrument Systems 30001183 Bognor Regis, UK
Dresser Al-Rushaid Valve & Instrument/ Ashcroft
30000428 Jubail
Dresser Instrument Division, Ashcroft 10017721 Stratford, US
WIKA Alexander Wiegand Gmbh Wika Middle East FZE
10032628 10029526
Klindgenberg, DE Dubai, AE
Emerson- Process Management 30004511 Wessling, DE
217 Differential Pressure Gauges
(9COM- 6000002749) - Indicator: Differential Pressure
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB instrumentation SPA ABB Automation Products Gmbh ABB Kent-Taylor Inc. ABB Automation Instrumentation
10004522 10015036 10018670 10018650
Lenno, IT Minden, DE Rochester, US Warminster, US
Barton Instrument Systems 30001183 Bognor Regis, UK
Dresser Al-Rushaid Valve & Instrument/ Ashcroft
30000428 Jubail
Dresser Instrument Division, Ashcroft 10017721 Stratford, US
Dwyer Instruments, Inc. 10017797 Michigan City, US
Honeywell, Inc. 10019010 Phoenix, US
Meriam Instruments Div. 10021406 Cleveland, OH, US
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 11 of 11
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
WIKA Alexander Wiegand Gmbh 10032628 Klingenberg, DE
WIKA Instrument Corporation 10023327 Lawrenceville, USA
300 Level
311 D/P Level Transmitters
See Category 211 - Pressure and Differential Pressure Transmitters
312 Level Gauge Glasses
(9COM- 6000002886) - Glass: Level Gauge
Refer to SAP System
313 Level Switches - Float and Displacer Type
(9COM- 6000002832) - Switch: Liquid Level
Refer to SAP System
314 Transmitter; Liquid Level; Displacer
(9COM- 6000002763) Level Instrument Displacer Type: (Transmitters/Controllers; NA)
Refer to SAP System
315 Level Instruments - Ultrasonic
(9COM- 6000002762)
Refer to SAP System
316 Level Instruments Capacitance or RF Admittance
(9COM- 6000002761) - Level Control: Capacitance Type
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 12 of 12
317 Level Instruments - Nuclear Radiation
(9COM- 6000002764) - Level Instrument: Radiation Type
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Thermo Electron Corp. (Texas Nuclear)
30001630 Round Rock, TX, US
Ohmart/Vega Corp. 30001852 Cincinnati, Ohio, US
Endress & Hauser, Inc.
Endress and Hauser
30001859 Greenwood, US
30003797 Maulburg, Germany
318 Tank Gauging Equipment Servo and Float
(9COM- 6000002838)
Specification: 34-SAMSS-318
Refer to SAP System
319 Tank Gauging Equipment Radar (for inventory tank use only)
(9COM- 6000002822)
Specification: 34-SAMSS-319
Refer to SAP System
320 Guided Wave Radar (GWR) Level Transmitters
(9COM- 6000007390) - Transmitter: Level; GWR
Refer to SAP System
321 Level Gauge- Magnetic Type (MLI)
(9COM- 6000002765) Gauge; Level; Magnetic
Refer to SAP System
400 Temperature
411 Temperature Transmitters
(9COM- 6000002852) - Transmitter: Temperature
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 13 of 13
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Emerson Process Management Emerson Process Management Ltd Emerson Rosemount Inc
10029032 10005275 10018041
Wessling, DE Worecester, GB Eden Prairie, US
Invensys Barcol-Air BV 10004767 Purmerend, NL
Honeywell, Inc. 10019010 Phoenix, US
ABB instrumentation SPA ABB Automation Products Gmbh ABB Automation Products Gmbh ABB Automation Instrumentation
10004522 10024603 10015036 10018650
Lenno, IT Alzenau, DE Minden, DE Warminster, US
Yokogawa Electric Corp. 10001950 Musashino City, JP
WIKA Alexander Wiegand Gmbh 10032628 Klindgenberg, DE
Endress+Hauser Wetzer Gmbh 10037950 Nesselwang, DE
Saudi Fal Company, Ltd. 10007457 Al-Khobar, SA
412 Temperature Indicators
(9COM- 6000002756) - Indicator: Temperature- Bimetallic and Expansion Types
Specification: Mandatory requirements are specified in SAES-J-400
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Ametek, Inc. (U.S. Gauge PMT) 10016194 Feasterville, US
ABB instrumentation SPA ABB Automation Products Gmbh ABB Automation Products Gmbh ABB Automation Instrumentation
10004522 10024603 10015036 10018650
Lenno, IT Alzenau, DE Minden, DE Warminster, US
Dresser Instrument - Ashcroft 10017721 Stratford, US
WIKA Alexander Wiegand Gmbh WIKA Instrument Corporation
10032628 10023327
Klindgenberg, DE Lawrenceville, USA
Rueger SA 30001251 Crissier, CH
413 Temperature Switches Mechanical
(9COM- 6000002835) - Switch: Temperature
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Custom Control Sensors, Inc. 10004389 Swindon, UK
Mercoid Corp. 10017798 Michigan City, IN, US
Barton Instrument Systems 30001183 Bognor Regis, UK
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 14 of 14
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
SOR, Inc. 10021774 Lenexa, KS, US
United Electric Controls 10022325 Watertown, MA, US
WIKA Middle East WIKA Gmbh
10029526 10032628
Dubai, AE Klingenberg, DE
415 Thermocouples
(9COM- 6000002888) Thermocouple
Specification: Mandatory requirements are specified in SAES-J-400
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Automation Products Gmbh ABB Instrumentation, Ltd.
30001111 30003760
Alzenau, DE Workington, GB
Emerson Process Management 10029032 Wessling, DE
Minco Products, Inc. 10020168 Minneapolis, US
Thermo Electric Co, Inc. 30001963 Saddle Brook, US
Doedijns Thermo Electric BV 30001296 Waddinxveen, NL
Gay Engineering and Sales Co. (GAYESCO)
10031229 Pasadena, TX, US
United Electric Controls 10022325 Watertown, MA, US
Conax Buffalo Technologies 10021385 Buffalo, US
Okazaki Manufacturing Co. 30001422 Chuo-Ku
WIKA Alexander Wiegand Gmbh 10032628 Klindgenberg, DE
Rueger SA 30001251 Crissier, CH
416 Resistance Temperature Detectors
(9COM- 6000002814)
Specification: Mandatory requirements are specified in SAES-J-400
Refer to SAP System
418 Thermowell
(9COM- 6000002845)
Specification: Mandatory requirements are specified in SAES-J-400
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 15 of 15
500 Analytical
511 Analyzer; Chromatograph; Process Gas or Liquid
(9COM- 6000002914)
Specification: 34-SAMSS-511; IR343200
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Automation 30001706 Lewisburg, US
Siemens Applied Automation 30001930 Bartlesville, US
Yokogawa Electric Corp. 30001465 Japan
Hamilton Sundstarnd 10024160 Pamona, CA, US
512 Oxygen Analyzers
(9COM- 6000002666)
Specification: 34-SAMSS-512; IR345400
Refer to SAP System
513 pH Analyzers
(9COM- 6000002667) - Analyzer: pH
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Instrumentation, Ltd. 30001058 Stonehouse, GB
Foxboro Co. 30002059 Foxboro, US
GLI International 10018722 Milwaukee, US
Yokogawa Electric Corp.
Yokogawa Electric Kofu Plant
30001465 Musashino-Shi, JP
30003284 Kofu, JP
Horiba Instruments 10019060 Irvine, CA, US
Emerson - Rosemount Analytical Division 30001646 Irvine, US
Endress + Hauser Conducta GmbH +Co KG
10039116 Gerlingen, DE
514 Hydrogen Sulfide Monitors; Gas
(9COM- 6000002786)
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 16 of 16
Specification: 34-SAMSS-514; IR344900
Refer to SAP System
515 Moisture Analyzers
(9COM- 6000002664)
Specification: 34-SAMSS-515; IR347400
Refer to SAP System
516 Analyzer Shelters
(9COM- 6000002898)
Specification: SAES-J-502
Refer to SAP System
517 Density Meter; Gas and Liquid
(9COM- 6000002720)
Specification: 34-SAMSS-517; IR345300
Refer to SAP System
518 Gravitometers
(9COM- 6000002746) Gravitometer
Refer to SAP System
520 BS&W Analyzers
(9COM- 6000002655) - Analyzer: Bottom Sediment and Water
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Thermo Electron Corp. 30001630 Round Rock, TX, US
FMC Fluid Control/Invalco 10018327 Stephenville, US
Halliburton Energy Services 30001727 US
AGAR Corp. 30002049 Houston, US
ROXAR Flow Measurement AS 30003347 Stavanger, NO
Weatherford Production 30001629 Kingwood, US
Phasedynamics, Inc. 30005690 Richardson, US
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 17 of 17
521 Chlorine Analyzers and Chlorinators
(9COM- 6000002658) - Analyzer: Chlorine
Refer to SAP System
522 Combustible Gas Monitors
(9COM- 6000002782) - Monitor; Gas; Combustible
(9COM- 6000002787) - Monitor; Gas; Combustible; Open Path Type
Specification: 34-SAMSS-514; IR344900
Refer to SAP System
523 Conductivity Analyzers
(9COM- 6000002660) - Analyzer: Conductivity
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Instrumentation, Ltd. 30001058 Stonehouse, GB
Emerson - Rosemount Analytical Division 30001646 Irvine, US
Endress + Hauser Conducta GmbH +Co KG 10039116 Gerlingen, DE
Horiba 10019060 Irvine, CA, US
Yokogawa Electric Corp.
Yokogawa Electric Kofu Plant
30001465 Musashino-Shi, JP
30003284 Kofu, JP
524 Continuous Emission Monitoring Analyzers
(9COM- 6000002663) - Analyzer: Furnace/Flue Gas
Refer to SAP System
525 FTIR/NIR Analyzers
(9COM- 6000002925) - Analyzer; NIR Spectrometer
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Analytical 10026423 Telford, GB
Hamilton Sundstarnd 10024160 Pamona, CA, US
Yokogawa Electric Corp. 30001465 Japan
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 18 of 18
530 Process Color Analyzers
(9COM- 6000002659) - Analyzer: Color
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
ABB Instrumentation, Ltd. 30001058 Stonehouse, GB
Ametek 30001481 Pittsburgh, US
Horiba 10019060 Irvine, CA, US
Metrisa, Inc. 10020215 25 Wiggins Avenue Bedford, MA 01730
531 Tunable Diode Analyzers
(9COM- 6000013921) - Analyzer: Tunable Diode (Extractive)
Refer to SAP System
532 Physical Property Analyzers
(9COM- 6000014021) - Analyzer: Physical Property
Refer to SAP System
600 Safety
605 Surge Relief Valves
Valve; Relief; Surge Relief Station
605.1 Gas Loaded Surge Relief Valves
9COM-6000002896 - Valve; Relief; Surge Gas Loaded
Refer to SAP System
605.2 Pilot Operated Surge Relief Valves
9COM-6000012803 - Valve; Relief; Surge Pilot Operated
Refer to SAP System
611 Safety Relief Valves; Flanged, Conventional and Balanced Bellows
(9COM- 6000002869)
Specification: 34-SAMSS-611; IR341900
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 19 of 19
612 Safety Relief Valves; Pilot Operated
(9COM- 6000002868)
Specification: 34-SAMSS-612; IR342000
612.1 For Processing Plants
Refer to SAP System
612.2 For Storage Tanks and Spheroids
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Tyco Whessoe 10001826 Manchester, UK
Tyco Varec 30001812 Stafford, US
Anderson Greenwood Crosby 30001812 Stafford, US
Groth Corporation 30003785 Stafford, US
613 Valve; Vent Pressure Vacuum (For Tanks)
(9COM- 6000002867)
Refer to SAP System
614 Rupture Discs
(9COM- 6000002549) - Rupture Disc Assembly
Refer to SAP System
615 Flame Arrestors
(9COM- 6000002679) - Arrestor: Flame
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
L&J Technologies (Shand and Jurs) 30001679 Hillside, US
Does not exist
Groth Corporation 30003785 Stafford, US
Braunschweiger Flammenfilter GMBH 30001087 Braunschweig, DE
Enardo LCC 10038807 Tulsa, US
616 Check Valve (for Gauge Glasses)
(9COM- 6000002680)- Valve: Backflow Preventer; for Instrument Installations
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 20 of 20
(9COM- 6000002854) - Valve: Check; Level Gauge Glass; Flow Shut-Off
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Clark-Reliance-Jerguson Gage & Valve Co. 10019404 Strongsville, US
Tyco Flow Control-Penberthy, Incorporated 30002066 Prophetstown, US
Simco Engineers 10001569 Jarrow, UK
Cesare Bonetti 10003565 Garbagnate, IT
617 Flame Monitoring Systems
(9COM- 6000002732); IR 345600
Specification: 34-SAMSS-619
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Hamworthy Combustion Engineering
30001164 Poole, GB
ABB Instrumentation 30001252 Pero, IT
Fireye Electronics 30001599 Derry, US
Forney International 30001671 Carrollton, US
Honeywell, Inc. 30001743 Phoenix, AZ, US
619 Burner Management Systems for Watertube Boilers
(9COM- 6000002723) - Emergency Shutdown System; Programmable Logic
Controller
Refer to SAP System
624 Speed Sensors (RPM)
(9COM- 6000002820) - Sensor: Speed
Specification: 34-SAMSS-625
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Woodward Governor 10001845 Rockford, IL, US
Bently-Nevada Corporation 30001527 Minden, US
SKF Condition Monitoring 30001915 San Diego, US
Rockwell Automaiton-Entek (IRD) 30001908 Milwaukee, Wisconsin, US
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 21 of 21
625 Vibration Monitors; Non-Contacting Type
(9COM- 6000002796)
Specification: 34-SAMSS-625; IR345100
Refer to SAP System
626 Monitor Systems; Temperature
(9COM- 6000002780)
Specification: 34-SAMSS-625
Refer to SAP System
628 Shut Down Cabinets - Local, Electro-pneumatic
628.1 Cabinet: Shutdown, Local, Pneumatic and Electric without Partial
Stroke Test Feature
(9COM- 6000002684)
Specification: 34-SAMSS-634
Refer to SAP System
628.2 Cabinet: Shutdown, Local, Pneumatic and Electric with Partial Stroke
Test Feature
(9COM- 6000002873)
Specification: 34-SAMSS-634
Refer to SAP System
628.3 Smart ZV Controller - Smart Valve Controller and Software that
provide the local control of Smart ZV with predefined Partial Stroke
Test Feature and local test pushbutton
(9COM- 6000010782)
Specification: 34-SAMSS-634
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 22 of 22
628.4 Smart ZV Assembly
(9COM- 6000002889) Assembly; Smart ZV Assembly per 34-SAMSS-634
Assembly; Smart ZV Assembly; Valve/Actuator Assembly with Local
Control Panel and Digital positioner; Does not include Valve.
Specification: 34-SAMSS-634
Refer to SAP System
632 Vibration Monitors - Seismic Type
(9COM- 6000002875) - Vibration Monitoring System: Seismic
Specification: 34-SAMSS-625
Refer to SAP System
635 Wellhead Shut Down Systems
635.1 (9COM- 6000003611)- Wellhead Emergency Shutdown System for
Multi-well Offshore Applications
Specification: 34-SAMSS-624
Refer to SAP System
635.2 CCC: 451545 (9COM- 6000003727)- Panel: Hydraulic; SSV/ SSSV;
Single-Well Onshore Applications
Specification: 34-SAMSS-624
Refer to SAP System
635.3 (9COM- 6000003729)- ACTUATOR: Surface Safety Valve; Hyd; Self
Contained Actuator
Specification: 34-SAMSS-624
Refer to SAP System
700 Valves
711 Control Valves; Globe
(9COM- 6000002861) - Valve: Control; Globe; including Actuator, Positioner
& Regulator
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 23 of 23
Specification: 34-SAMSS-711; IR340100
Refer to SAP System
712 Control Valves - Ball and Eccentric Plug (Characterized)
(9COM- 6000002858) - Valve: Control; Ball; including Actuator, Positioner &
Regulator
Specification: 34-SAMSS-711; IR340100
Refer to SAP System
713 Control Valves - Butterfly and Rotary Plug
(9COM- 6000002859) - Valve: Control; Butterfly; including Actuator,
Positioner & Regulator
Specification: 34-SAMSS-711; IR340100
Refer to SAP System
714 Control Valves - Severe and Non-General Service
(9COM- 6000002891) - Valve: Control; Non-General Service including
actuator, positioner and accessories
Specification: 34-SAMSS-711
Refer to SAP System
715 Control Valves; Angle
(9COM- 6000002855) - Valve: Control; Globe Angel; including Actuator,
Positioner & Regulator
Specification: 34-SAMSS-711; IR340100
Refer to SAP System
716 Valve Actuators; Pneumatic; On-Off
(9COM- 6000002899) - Actuator: For Operating On/Off Valve; Air/Nitrogen
Powered; Diaphragm Operated
(9COM- 6000002903) - Actuator: For Operating Valve; Pneumatic Piston
Specification: 34-SAMSS-716; IR341000
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 24 of 24
717 Valve Actuators; Hydraulic and Electro/Hydraulic
(9COM- 6000002902)
Specification: 34-SAMSS-717 to purely hydraulic only
Refer to SAP System
718 Valve Actuators Electric
718.1 Electrical Actuators for Control Applications (including Fail Steady
electric operated ZV)
(9COM- 6000002901) - Actuator: For Operating Valve; Electric Motor
Specification: 34-SAMSS-718; IR341000
Refer to SAP System
718.2 Electrical Actuators for ESD/Wellhead Applications
9COM- 6000010821- Actuator: For Operating Valve; Electric Motor,
Fail Safe Design
Specification: 34-SAMSS-718
Refer to SAP System
719 Regulators - Pressure and Flow
(9COM- 6000002810) - Regulator: Pressure; Flow
Refer to SAP System
720 Regulators - Temperature
(9COM- 6000002811) - Regulator: Temperature
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
AMOT Controls Corp. 10003145 Bury St Edmunds, GB
ABB 10018670 Rochester, US
Leslie Controls Company 10017073 Tampa, US
722 Control Valves; Automatic Recirculation
(9COM- 6000002856)
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 25 of 25
723 Control Valves; Desuperheating
(9COM- 6000002860) Valve: Control; Desuperheating; including Actuator, Regulator, Positioner
Specification: 34-SAMSS-711
Refer to SAP System
800 Panel Instrumentation
811 Controllers and Indicators Analog
(9COM- 6000002700) - Controller/Indicator: For Panel Mounting
Refer to SAP System
812 Recorders
(9COM- 6000002805) - Recorder: Chart
Refer to SAP System
813 Indicators - Multi-point, Thermocouple
(9COM- 6000002753) - Indicator: Multi-point
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Ametek-Rochester Instrument Systems 10002603 Dunfermline, GB
Yamatake 30001464 Kanagawa pref., JP
Honeywell, Inc. 30001743 Phoenix, AZ, US
Yokogawa Electric Corp. 30001465 Japan
Thermo Electric Europe BV 30001296 Waddinxveen, NL
WIKA Instruments, Limited 30004141 30003986
Edmonton, CA DE
814 Recorders - Multi-point
(9COM- 6000002807) - Recorder: Multi-point
Refer to SAP System
815 Annunciator Panel: Solid State and Plug-In Module
(9COM- 6000002678)
Specification: 34-SAMSS-815; IR343300
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 26 of 26
Refer to SAP System
818 Controllers Field
(9COM- 6000002703) - Controller: Field
Refer to SAP System
820 Control Panels; Indoor; Cabinet Structure only; Does Not include integrators
(9COM- 6000002697)
Specification: 34-SAMSS-820
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Hoffman 10020718 2100 Hoffman Way, Anoka, MN, US
Remal Factory 30000794 Alkhobar, SA
Rittal 30003116 Herborn
821 Control Panels; Outdoor; Cabinet Structure only; Does Not include integrators
(9COM- 6000002698)
Specification: 34-SAMSS-821
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Hoffman 10020718 2100 Hoffman Way, Anoka, MN, US
Remal Factory 30000794 Alkhobar, SA
Rittal 30003116 Herborn
822 Cabinets; for Vibration Monitoring Systems
(9COM- 6000013781)
Specification: 34-SAMSS-821; Form 175-343100
Refer to SAP System
823 Cabinets; for PLC Systems
(9COM- 6000013922)
Specification: 34-SAMSS-821; Form 175-343100
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 27 of 27
Refer to SAP System
824 Single Loop Controllers
(9COM- 6000002706) - Controller: Microprocessor
Refer to SAP System
825 Relays - Electro-magnetic
(9COM- 6000002812) - Relay: Electro Magnetic
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Tyco - Potter and Brumfield 10019820 Winston, US
Cutler Hammer 10017874 Milwaukee, US
Omron 10004446 Schaumburg, IL, US
Allen Bradley/Rockwell Automation 10021204 Brussels, Belgium
STPI Relais Electriques 10001463 Paris, FR
826 Relays Pneumatic
(9COM- 6000002813) - Relay: Pneumatic
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Emerson-Fisher Controls Co. 30001650 Marshalltown, US
Fairchild Industrial Products Co. 10018199 3920 West Point Blvd. Winston-Salem, NC 27103
Siemens- Moore Products 10002425 Yeovil
Marsh Bellofram 60007017 9 Castle Park Queens Drive, Nottingham NG2 1AH
827 Solenoid Valves
(9COM- 6000002871)- Valve: Solenoid Operated
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Automatic Switch Co. (ASCO)
10000358 Scherpenzeel, NL
10018037 Florham, US
10004648 Japan
Circle Seal Controls 10023208 Corona, CA, US
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 28 of 28
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Maxseal (Thompson Valves) 10003159 Dorset, UK
Parker-Skinner Valve Division 10024829 New Britain, US
Versa Valves 10022525 Paramus, US
828 Transducers - Signal Conversion
(9COM- 6000002848) - Transducer: Signal Conversion
828.1 (I/P) Transducers
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Emerson-Fisher Controls Co. Emerson Process Management
10018059 10029032
Marshalltown, US Wessling, DE
ABB - Kent Taylor, Inc. ABB Automation Instrumentation
10018670 10018650
Rochester ,US Warminster, US
Foxboro Co. (Invensys) 10016490 Houston, US
Dresser Flow Control 10004242 Uxbridge, GB
Dresser Al-Rushaid Valve And 30000428 Jubail, SA
Siemens Moore Process Automation 10002425 Yeovil, GB
828.2 E/I Transducers
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Foxboro Co. (Invensys) 10016490 Houston, US
Honeywell Sensing & Control 10019057 Freeport, US
Ametek-Rochester Instrument Systems 10002603 Dunfermline, GB
Moore Industries 10020228 North Hills, US
829 Pilot Valves
(9COM- 6000002918) - Valve: Pilot
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Automatic Switch Co. (ASCO) 10000358 Scherpenzeel, NL
10004648 Japan
Versa Valves 10022525 Paramus, US
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 29 of 29
830 Controller; Programmable Logic
(9COM- 6000002708)
Specification: 34-SAMSS-830, IR344000
Refer to SAP System
900 Installation
904 Foundation Fieldbus (FF) Power Supplies
9COM- 6000010825
Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
MTL/Relcom, Inc. 10005043 Luton, UK
Pepperl & Fuchs 10015196 Mannheim-Schonau, DE
905 Foundation Fieldbus (FF) Wiring Blocks
9COM- 6000010781
Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
MTL/Relcom, Inc. 10005043 Luton, UK
Pepperl & Fuchs 10015196 Mannheim-Schonau, DE
Moore Industries/Moore Hawke 10020228 North Hills, US
906 Foundation Fieldbus (FF) Terminators
9COM- 6000010826
Specification: Mandatory requirements are per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
MTL/Relcom, Inc. 10005043 Luton, UK
MTL/Relcom, Inc. 10001178 Demmel, NL
907 Foundation Fieldbus (FF) Multi-Input Temperature Multiplexer
(9COM- 6000013000)
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 30 of 30
Specification: Mandatory requirements per SAES-J-904
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Emerson- Rosemount Division 30001655 Austin, TX, US
MTL 10005043 Luton, UK
Pepperl & Fuchs 10015196 Mannheim, DE
913 Instrument Wire and Cable
(9COM- 6000000805)- Cable: Instrumentation & Thermocouple;
per 34-SAMSS-913
(9COM- 6000002686) - Cable: Instrumentation & Control; per 34-SAMSS-913
Specification: 34-SAMSS-913; IR347600
Refer to SAP System
914 Foundation Fieldbus Cables
(9COM- 6000013923)- Cable: for Foundation Fieldbus loops; per 34-SAMSS-913
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Belden Wire & Cable 30001526 Richmond, US
Belden (Canada), Inc. 30003545 Cobourg, CA
Dekoron Wire and Cable 30001824 Mount Pleasant, US
CBI Electric Aberdare ATC Telecom Cables 30005416 Brits, ZA
Middle East Specialized Cables Co. 30000660 Riyadh, SA
915 Tubing; Metallic
(9COM- 6000000028) - Tubing: Alloy
(9COM- 6000000068) Tubing Metallic; Stainless Steel
Refer to SAP System
918 Cable and Support Tray
(9COM- 6000000744) - Cable Tray: Aluminum
(9COM- 6000000775) - Cable Tray: Fiberglass
Refer to SAP System
Document Responsibility: Instrumentation Standards Committee SAES-J-002
Issue Date: 12 December 2010
Next Planned Update: 1 January 2012 Technically Acceptable Instrument Manufacturers
Page 31 of 31
919 Valve: Instrument
(9COM- 6000000304) - Valve: Instrument
Refer to SAP System
920 Valve Manifolds for Instrument-Process Interface
(9COM- 6000002768) - Manifold: Instrument or Pressure
Note: Manifolds supplied by the approved transmitter manufacturers are acceptable.
Refer to SAP System
921 Air Filter Regulators
(9COM- 6000002809) - Regulator: Air-Filter
Refer to SAP System
922 Tubing Fittings
(9COM- 6000000221) - Fitting: Tubing; 316 SS Flared
(9COM- 6000000208) - Fitting: Tubing; 316 SS Flareless / Compression
MANUFACTURER VENDOR/ PLANT ID
LOCATION NOTES
Crawford Fitting Co. (Swagelok) 30001581 Highland Heights, US
Parker Hannifin (CPI & A-LOK) 30004267 Barnstaple, UK
Hoke, Incorporated (Gyrolok) 30002062 Spartanburg, US
Parker Hannifin (CPI & A-LOK) 10032873 Mainz-Kastel, DE
Parker Hannifan 30001868 Jacksonville, US
HY-LOK Corporation 30004251 Busan, KR On-Hold
Revision Summary 26 June 2010 Revised the "Next Planned Update." Reaffirmed the content of the document, and
reissued with minor revision. 12 December 2010 Minor revision to reflect SAES-J-002/SAP synchronization activities.
top related