SABIT RC - 2 - SaudiBitumen Sabit RC-2.pdf · Introduction: SABIT RC - 2, Cold applied product, easy to apply, it doesn't need thinning or heating. Uses & Application: SABIT RC -

Introduction:

SABIT RC - 2, Cold applied product, easy to apply, it doesn't need thinning or heating.

Uses & Application:

SABIT RC - 2, suitable for use in the construc-tion & maintenance of pavement as designated in MOC Specification. SABIT RC - 2 is applied to asphalt or granular surfaces using truck mounted spray equipment.

Coverage:

For tack coats, the maximum rate is 0.25 Liters/m2, depends on the porosity of the prepared soil surface.

Health & Safety:

Workers should wear protective gloves, and goggles during application. SABIT RC - 2 contains volatile solvent and have low flash point. Care must be taken to ensure that there is adequate ventilation in the working place. Fires and naked flames should be kept at a distance.

Packing & Storage:

SABIT RC - 2 can be supplied in bulk, drums and cans.-Store in dry and shaded area in original packing, The container should be kept covered while working in order to prevent the evaporation of solvent.

TECHNICAL DATA

SABIT RC - 2

(RAPID CURING CUT-BACKASPHALTCOMPLIES WITH MOCSpecification for Road and Bridge Construction Table 2 of Section 4.04)