S402 Stainless Steel Load Cell - Strain Measurement Devices · S402 Stainless Steel Load Cell Europe Strain Measurement Devices Bury Road, Chedburgh, Bury St Edmunds IP29 4UQ sales@smdsensors.co.uk

The Series 402 Load Cell is a high quality and robust single point OEM compression load cell. It is available in 4 standard ranges, for measuring forces from 100N up to 1000N. However, if your range requirements are di�erent do not hesitate to contact us an we will strive to meet the desired parameters. Built for Press Control and in line compression other weighing and force measurement applications. A 5,000Ω Wheat-stone bridge and thin-�lm strain gauge provide extremely low power consumption as well as unmatched long term stability.

Applications:· Orthopedic Instruments· Process Control· Hydraulics Force Control· Press Tool· Printing

Features:· Low Pro�le· Stainless Steel· Low Power Consumption· Long Term Stability· Low Hysteresis

S402 Stainless Steel Load Cell

EuropeStrain Measurement Devices

Bury Road, Chedburgh, Bury St Edmunds IP29 4UQsales@smdsensors.co.uk | +44 (0)1284 852 000

USAStrain Measurement Devices55 Barnes Park North, Wallingford, CT 06492sales@smdsensors.com | (203) 294-5800

www.smdsensors.com

Product Speci�cations:Ranges:

Max Load (Safe):Bridge Con�guration:

Bridge Resistance:Recommended Excitation Voltage:

Insulation Resistance:Full Scale Output:

Zero Balance:Repeatability:

Linearity:Hysteresis:

Long Term Stability:Creep/Creep Recovery:

Temperature E�ect on Zero:Tempertaure E�ect on Span:

Operating Temperature:Body Material:

Cable:

100 N, 200 N, 500 N, 1000 N, 2000 N200% FSO5 Wire Full Bridge5000 Ω Nominal10 V DC/AC (20 V Max)1000 MΩ @ 50 V DC2 mV/V Nominal+/- 0.3 mV/V (+/-1% FSO Optional)+/- 0.01% FSO+/- 0.03% FSO+/- 0.03% FSO

EuropeStrain Measurement Devices

Bury Road, Chedburgh, Bury St Edmunds IP29 4UQsales@smdsensors.co.uk | +44 (0)1284 852 000

USAStrain Measurement Devices55 Barnes Park North, Wallingford, CT 06492sales@smdsensors.com | (203) 294-5800

www.smdsensors.com

0.00682 mm0.00693 mm0.00971 mm0.01072 mm0.0257 mm

De�ection @ FS

SMD402-0100SMD4020200SMD402-0500SMD402-01000SMD402-02000

22 lb [100 N]44 lb [200 N]112 lb [500 N]225 lb [1000 N]450 lb [2000 N]

Part Name Capacity

Range

SMD402Cable Length in CM (L) Base Part Number

Range Housing Thread Size50 Vdc

Max

+OUT(WHITE)

-EXC(BLACK)

+EXC(RED)

-OUT(GREEN)

ELECTRICAL SCHEMATIC

SUBSTRATE

[15.0 mm]0.59

L

Part number example: SMD402-0200-322-0100. A 200 N sensor with M6 daiphragm thread. M4 housing thread, and 100 cm cable. * Note: 2000 N is M6 thread only

R R R R D R H L L L L - - -

Diaphragm Thread Size

PART NUMBER TABLE

Range DiaphragmThread Size

HousingThread Size

01000200050010002000*

100 N200 N500 N

1000 N2000 N

123

UnthreadedM4M6

12345

100 N200 N500 N

1000 N2000 N

Range

UnthreadedM4M6

N/A

0.217”[5.5 mm] Mechanical Ground

Housing Thread

Positive ForceDiaphragm Thread

0.65”[16.5 mm] 0.827”

[21 mm]