The Series 402 Load Cell is a high quality and robust single point OEM compression load cell. It is available in 4 standard ranges, for measuring forces from 100N up to 1000N. However, if your range requirements are different do not hesitate to contact us an we will strive to meet the desired parameters. Built for Press Control and in line compression other weighing and force measurement applications. A 5,000Ω Wheat- stone bridge and thin-film strain gauge provide extremely low power consumption as well as unmatched long term stability. Applications: · Orthopedic Instruments · Process Control · Hydraulics Force Control · Press Tool · Printing Features: · Low Profile · Stainless Steel · Low Power Consumption · Long Term Stability · Low Hysteresis S402 Stainless Steel Load Cell Europe Strain Measurement Devices Bury Road, Chedburgh, Bury St Edmunds IP29 4UQ [email protected] | +44 (0)1284 852 000 USA Strain Measurement Devices 55 Barnes Park North, Wallingford, CT 06492 [email protected] | (203) 294-5800 www.smdsensors.com Product Specifications: Ranges: Max Load (Safe): Bridge Configuration: Bridge Resistance: Recommended Excitation Voltage: Insulation Resistance: Full Scale Output: Zero Balance: Repeatability: Linearity: Hysteresis: Long Term Stability: Creep/Creep Recovery: Temperature Effect on Zero: Tempertaure Effect on Span: Operating Temperature: Body Material: Cable: 100 N, 200 N, 500 N, 1000 N, 2000 N 200% FSO 5 Wire Full Bridge 5000 Ω Nominal 10 V DC/AC (20 V Max) 1000 MΩ @ 50 V DC 2 mV/V Nominal +/- 0.3 mV/V (+/-1% FSO Optional) +/- 0.01% FSO +/- 0.03% FSO +/- 0.03% FSO <0.1% FSO/Year +/- 0.02% FSO +/- 0.6 μ V/V°C (Tighter Tolerances Avaliable) +/- 0.6 μ V/V°C (Tighter Tolerances Avaliable) -40 to 140 °C 15-5 PH Stainless Steel 4 Cond. UBA32119, 32 AWG Customer Specified Length ISO9001 Registered ISO13485 Registered