Transcript
8/17/2019 Presentation PAS223.pdf
1/17
PASPAS 223223
requirements for food safety in the
manufacture and provision of food
packaging.
October 2011
Nancy Schouppe
8/17/2019 Presentation PAS223.pdf
2/17
AgendaAgenda
1. Implementation of GFSI recognized scheme2. Benefits PAS 223
3. Background to PAS 2234. Scope of PAS 2235. Notables of PAS 2236. PAS 223 Steering team member companies
.9. Table of contents10. Executive summary with main differences11. GAP analysis PAS 220 vs PAS 22312. Q&A
October 27, 2011
8/17/2019 Presentation PAS223.pdf
3/17
ImplementationImplementation ofof
GFSI Recognized SchemesGFSI Recognized Schemes
We ( Coca-Cola) asked our suppliers to implement the best availablefood safety and quality management systems that are verified throughrigorous supplier quality audits and local technical supplierauthorizations.
3
All our primary packaging and ingredient suppliers must achieveexternal facility audit certification to one of the Global Food SafetyInitiative (GFSI) recognized schemes (www.mygfsi.com)
8/17/2019 Presentation PAS223.pdf
4/17
BenefitsBenefits PAS 223PAS 223
1/Provides a common international methodology for developing aprerequisite programme for food/drink packaging safety
2/ Ensures confidence in food/drink packaging safety systems,bringing consistency across global packaging industry practices
October 27, 2011
undertaken if desired
4/ Assists organisations with the wider implementation of an ISO22000 management system.
5/Broad international consensus and buy-in among packagingmanufacturers.
8/17/2019 Presentation PAS223.pdf
5/17
Background to PASBackground to PAS 223223
Needs• Need to close interpretation gap in ISO 22000 for PRPs
• Risk-based approach (HACCP and ISO 22000)• Aligned with ISO 22000• Fit with other PRP food safety initiatives• Accepted by GFSI
PAS Route• Proven success (PAS 220)• Speed and international reach
• Established route to ISO
October 27, 2011
8/17/2019 Presentation PAS223.pdf
6/17
Scope of PAS 223Scope of PAS 223……
• The PAS specifies requirements for establishing, implementingand maintaining prerequisite programmes (PRPs) and design
requirements to assist in controlling food safety hazards in themanufacture of food packaging• The PAS is applicable to all organizations, regardless of sizeor complexities, that manufacture food packaging •
Each organization is required to do a documented foodsafety hazard and risk assessment that includes eachrequirement• Where exclusions are made or alternative measures areimplemented, these need to be justified by the food safety
hazard and risk assessment• The PAS is not a management system and is intended to beused in conjunction with BS EN ISO 22000, not in isolation• For the purpose of this PAS, the term food includes beverages
October 27, 2011
8/17/2019 Presentation PAS223.pdf
7/17
Notables of PAS 223…Notables of PAS 223…
• Can only be used in conjunction with ISO 22000
• Not a management system
• Strong focus on design and the relationship between
October 27, 2011
oo r n manu acturers an pac ag ng manu acturers
• Global in its development and application
8/17/2019 Presentation PAS223.pdf
8/17
PAS 223PAS 223 Steering teamSteering teammembers companiesmembers companies
ManufacturersManufacturers TradeTrade
• Sponsored by the G5:• Coca-Cola• Unilever• Kraft foods
• Danone• Nestle
• Owens-Illinois• Rexam• ALPLA• AMCOR• Tetra PaK
• Institute of PackagingProfessionals (IOPP)
• Food Safety Alliancefor Packaging ( FSAP)
• FSSC22000• ProCert
8
8/17/2019 Presentation PAS223.pdf
9/17
3 Key Focus3 Key Focus AreasAreas for Packagingfor Packaging
PAS 223 DevelopmentPAS 223 Development
• October 2010 : project initiated
• 8 December 2010: Kick-off meeting
• January 2011: First Draft produced• 14 February 2011: First Steering meeting
• 3 March 2011: First Draft shared for public comment• 14/15 April 2011: Second Steering Mtg & Ext Comment Review
• May: further Steering Group discussion and consultation
• June 30 2011: PAS 223 Published
9
FSSC 22000 Extension of Scope -Packaging
• As of Oct 2011 – is already published
• Is send to GFSI for benchmarking
GFSI Technical Work Group -Packaging
• Parallel path development of scheme accreditationwork for Packaging
• Kick off meeting at GFSI London Feb 2011
8/17/2019 Presentation PAS223.pdf
10/17
Packaging Supplier SchemePackaging Supplier Scheme – – Future DeploymentFuture Deployment
ISO22000
PAS223
22000
10
8/17/2019 Presentation PAS223.pdf
11/17
Table of contents…Table of contents…
– Establishments
• General requirements
• Environment
• Locations of establishments
– Layout and workspace
Utilities
General requirements
Water supply
Air quality and ventilationCompressed air and othergases
Lighting
• General requirements• Internal design, layout and traffic
patterns
• Internal structures and fittings
• Equipment
• Temporary/mobile structures
• Storage
October 27, 2011
Waste
General requirements
Containers for waste
Waste management and
removalDrains and drainage
8/17/2019 Presentation PAS223.pdf
12/17
Table of contents…Table of contents…
– Equipment suitability andmaintenance
• General requirements• Hygienic design
• Food packaging contact surfaces
• Testing and monitoring
Contamination and migration
General requirements
Microbiological contamination
Physical contamination
Chemical contamination
Chemical migration
• Preventive and correctivemaintenance
– Purchased materials and services
• General requirements
• Selection and management ofsuppliers
• Incoming raw materials
October 27, 2011
Cleaning
General requirements
Cleaning agents and tools
Cleaning programmesMonitoring cleaning programmeeffectiveness
8/17/2019 Presentation PAS223.pdf
13/17
Table of contents…Table of contents…
– Pest control
• General requirements
• Pest control programmes• Preventing access
• Harbourage and infestations
• Monitoring and detection
Personnel hygiene and facilities(continued )
Illness and injuries
Personal cleanlinessPersonal behaviour
Rework• ra ca on
– Personnel hygiene and facilities
• General requirements
• Personnel hygiene facilities andtoilets
• Staff canteens and designatedeating areas
• Workwear and protective clothing
October 27, 2011
General requirementsStorage, identification andtraceability
Rework usage
Withdrawal procedures
General requirements
Withdrawal requirements
8/17/2019 Presentation PAS223.pdf
14/17
Table of contents…Table of contents…
– Storage and transport
• General requirements
• Warehousing requirements
• Vehicles, conveyances andcontainers
Food packaging design anddevelopment
General requirements
Communication and changecontrol
Design
Specifications
– Food packaging information andconsumer awareness
– Food defence, biovigilance and
bioterrorism• General requirements
• Access controls
October 27, 2011
Process validation
8/17/2019 Presentation PAS223.pdf
15/17
ExecutiveExecutive summarysummary withwith mainmaindifferencesdifferences
ExecutiveExecutive SummarySummary V4.pdfV4.pdf
October 27, 2011
8/17/2019 Presentation PAS223.pdf
16/17
GapGap analysisanalysis
PAS 220 vs PAS 223PAS 220 vs PAS 223
Gap Analyses PAS 220 vs PAS 223Gap Analyses PAS 220 vs PAS 223..
October 27, 2011
8/17/2019 Presentation PAS223.pdf
17/17
Q&A?Q&A?
October 27, 2011
top related