Transcript
Oil & Gas ProcessingPresenting Aspentech and John M. Campbell & Co. in Norway
2 3
Increasing well complexity and production at remote
locations, inevitably results in needs for higher
competence. At Maersk Training we recognise this
and have designed our training to meet the challenges
and risks of the working environment.
The specter of Maersk Training is wide. But we believe in
specific training for the needs of different industries and
companies, and for the actual working environment of
people. That is why we have organized the training in
different fields, all staffed by experienced specialist
trainers.
Focusing on oil and gas we are proud to present
our valued cooperation partners Aspentech and John M.
Campbell & Co.
Learn to build process simulations using Aspen HYSYS®.
Understand the capabilities of Aspen Flare System
Analyzer to rigorously model flare systems and
equipment, and develop practical experience through
modeling exercises with Modeling Flare System. Develop
the skills for creating and running dynamic simulations
using Aspen HYSYS® Dynamics. Learn how to solve
dynamic problems and how to transfer steady-state
models to dynamic models.
• Process Modeling using Aspen HYSYS®
• Dynamic Modeling using Aspen HYSYS® Dynamics
• Modeling Flare System with Aspen FLARENET
Maersk Training in corporation with John M. Campbell
& Co. is offering specialist gas processing and gas facilities
training courses. We provide advanced technical
training, for highly skilled employees, and bring real
world experience and competences to suit your demand
for a competent workforce.
• Overview of Gas Processing – Technical (G2)
• Gas Conditioning & Processing (G4)
• Gas Conditioning and Processing Special (G5)
• Oil Production & Processing Facilities (PF4)
• Operator Training for Oil & Gas Processing Facilities
(OT1)
We bring technical oil & gas processing training closer to our customer
”a better learning experience” says it all.
We deliver knowledge and learning, thus increasing
work performance, effectivity and business potential,
while decreasing risk of incidents and cost.
4 54 5
EHY101 Aspen HYSYS: Process ModellingDurAtiOn: 3 days
LEvEL: Introductory
Learn to build process simulations
using Aspen HYSYS. Discover how
Aspen HYSYS allows rapid flowsheet
construction and bi-directional
calculations. Investigate how
templates and subflowsheets can
streamline and organize simulation
efforts. Learn how to do preliminary
cost estimation using Aspen Process
Economic Analyzer from the Aspen
HYSYS Environment.
EHY2511 Flare network Design and rating
EHY221 Aspen HYSYS Dynamics: Dynamic Modelling
DurAtiOn: 2 days
LEvEL: Intermediate
Understand the capabilities of Aspen
Flare System Analyzer to rigorously
model flare systems and equipment,
and develop practical experience
through modelling exercises.
Enables the attendees to develop
flare network models for convergent,
divergent and looped systems.
DurAtiOn: 2 days
LEvEL: Intermediate
Develop the skills for creating and
running dynamic simulations using
Aspen HYSYS Dynamics. Learn how
to solve dynamic problems and how
to transfer steady-state models
to dynamic models. Discover
techniques and “rules of thumb” for
controller tuning. See how different
control strategies can handle
different types of disturbances and
how capacitance and dead-time
affect controllability.
Aspentech training
Operator training for Oil & Gas Processing Facilities - Ot1
Oil Production and Processing Facilities - PF4
LEvEL: Basic
DiSciPLinE: Operator Training
DurAtiOn: 5 Days
ABOut tHE cOurSE
This course will provide the basic
knowledge required for
understanding processes and
operating issues in typical North
Sea production facilities. The course
is designed for Production operators
and other non-engineering
personnel requiring a broad
introduction to production facilities
and processes, including the
separation, conditioning and
disposition of produced oil, gas and
water; including the common
operational difficulties that may
arise, as well as the operational
tactics used to resolve them.
LEvEL: Foundation
DiSciPLinE: Process Facilities
DurAtiOn: 10 Days
ABOut tHE cOurSE
The emphasis of this course is on
oil production facilities – from the
wellhead to the delivery of a
specification crude oil product to
the refinery. Both onshore and
offshore facilities will be discussed.
Produced water treating and water
injection systems are also covered.
Solution gas handling processes and
equipment will be discussed as well,
though at a relatively high level. In
addition to the engineering aspects
of oil production facilities, practical
operating problems will also be
covered including emulsion
treatment, sand handling, dealing
with wax and asphaltenes, etc.
Exercises requiring calculations are
utilized throughout the course.
The course is intended to be comple-
mentary to the G4 Gas Conditioning
and Processing course which is
focused on the gas handling side of
the upstream oil and gas facilities
area.
Overview of Gas Processing - technical - G2
Gas conditioning and Processing - G4
Gas conditioning and Processing - Special - G5
LEvEL: Basic
DiSciPLinE: Gas Processing
DurAtiOn: 3 Days
G2 is a versatile overview of the gas
conditioning and processing industry
based on highly condensed material
from Campbell’s G4 and G6 courses.
As a wide ranging overview, it is
suitable for “interested parties” more
so than direct practitioners, such as
geologists, reservoir engineers, line
managers, sales and business
development staff, related specialists
such as environmental staff,
operational staff, shift foremen,
or those new to the industry such
as entry-level engineers, as well as
anyone interested in a general,
technically oriented overview of
the gas processing industry.
LEvEL: Foundation
DiSciPLinE: Gas Processing
DurAtiOn: 10 Days
The “Campbell Gas Course™” has been
the standard of the industry for forty
years. Over 30,000 engineers have
attended our G4 program, considered
by many to be the most practical and
comprehensive course in the oil and
gas industry. Both hand-methods and
computer-aided analysis are used
to examine sensitivities of technical
decisions. To enhance the learning
process, about 30 problems will be
assigned, reviewed and discussed
throughout the course.
LEvEL: Intermediate
DiSciPLinE: Gas Processing
DurAtiOn: 5 Days
The course has been designed to
cover topics from the 10 day G4
course in an accelerated 5-day format
using a commercial simulator to
perform calculations. A basic working
knowledge of the commercial
process simulation package being
used will provide the best oppor-
tunity to achieve the learning
objectives of this course. Volumes 1
and 2 of the John M. Campbell text
books, Gas Conditioning and
Processing, are used as the basis for
the material presented in this course.
A comprehensive course exercise
based on a typical gas processing
facility which can be applied to either
onshore or offshore facilities is used
for this course. The problem is
developed in stages, as the material is
covered, using a commercial
simulator package (typically
Promax® or UNISIM®). At the
completion of the course the
participant will have developed
a process simulation model that
includes a dew point control
process, a mechanical refrigeration
process with economizers, hydrate
inhibition using MEG, gas
dehydration using TEG, and liquid
product stabilization with recycle.
John M. campbell & co training
6 7
Maersk training norway ASLuramyrveien 234313 SandnesNorway Tel: +47 51 96 19 20norway@maersktraining.comwww.maersktraining.no
top related